[patch 2/7] acpi4asus: add support for F3Sa

[patch 2/7] acpi4asus: add support for F3Sa

[akpm]

From: Luca Tettamanti <kronos.it@gmail.com>

Add support for ASUS F3Sa notebook. Features:
- LCD on/off
- Brightness
- Wifi kill
- Bluetooth kill

Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Karol Kozimor <sziwan@users.sourceforge.net>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 drivers/acpi/asus_acpi.c |   55 ++++++++++++++++++++++++++++++-------
 1 file changed, 45 insertions(+), 10 deletions(-)

diff -puN drivers/acpi/asus_acpi.c~acpi4asus-add-support-for-f3sa drivers/acpi/asus_acpi.c
--- a/drivers/acpi/asus_acpi.c~acpi4asus-add-support-for-f3sa
+++ a/drivers/acpi/asus_acpi.c
@@ -142,6 +142,7 @@ struct asus_hotk {
 		xxN,		//M2400N, M3700N, M5200N, M6800N, S1300N, S5200N
 		A4S,            //Z81sp
 		//(Centrino)
+		F3Sa,
 		END_MODEL
 	} model;		//Models currently supported
 	u16 event_count[128];	//count for each event TODO make this better
@@ -405,7 +406,20 @@ static struct model_data model_conf[END_
 		.brightness_get    = "GPLV",
 		.mt_bt_switch      = "BLED",
 		.mt_wled           = "WLED"
-	}
+	},
+
+	{
+		.name		= "F3Sa",
+		.mt_bt_switch	= "BLED",
+		.mt_wled	= "WLED",
+		.mt_mled	= "MLED",
+		.brightness_get	= "GPLV",
+		.brightness_set	= "SPLV",
+		.mt_lcd_switch	= "\\_SB.PCI0.SBRG.EC0._Q10",
+		.lcd_status	= "\\_SB.PCI0.SBRG.EC0.RPIN",
+		.display_get	= "\\ADVG",
+		.display_set	= "SDSP",
+	},
 
 };
 
@@ -710,15 +724,8 @@ static int get_lcd_state(void)
 {
 	int lcd = 0;
 
-	if (hotk->model != L3H) {
-		/* We don't have to check anything if we are here */
-		if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd))
-			printk(KERN_WARNING
-			       "Asus ACPI: Error reading LCD status\n");
-
-		if (hotk->model == L2D)
-			lcd = ~lcd;
-	} else {		/* L3H and the like have to be handled differently */
+	if (hotk->model == L3H) {
+		/* L3H and the like have to be handled differently */
 		acpi_status status = 0;
 		struct acpi_object_list input;
 		union acpi_object mt_params[2];
@@ -745,6 +752,32 @@ static int get_lcd_state(void)
 		if (out_obj.type == ACPI_TYPE_INTEGER)
 			/* That's what the AML code does */
 			lcd = out_obj.integer.value >> 8;
+	} else if (hotk->model == F3Sa) {
+		unsigned long tmp;
+		union acpi_object param;
+		struct acpi_object_list input;
+		acpi_status status;
+
+		/* Read pin 11 */
+		param.type = ACPI_TYPE_INTEGER;
+		param.integer.value = 0x11;
+		input.count = 1;
+		input.pointer = &param;
+
+		status = acpi_evaluate_integer(NULL, hotk->methods->lcd_status,
+						&input, &tmp);
+		if (status != AE_OK)
+			return -1;
+
+		lcd = tmp;
+	} else {
+		/* We don't have to check anything if we are here */
+		if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd))
+			printk(KERN_WARNING
+			       "Asus ACPI: Error reading LCD status\n");
+
+		if (hotk->model == L2D)
+			lcd = ~lcd;
 	}
 
 	return (lcd & 1);
@@ -1134,6 +1167,8 @@ static int asus_model_match(char *model)
 		return W5A;
 	else if (strncmp(model, "A4S", 3) == 0)
 		return A4S;
+	else if (strncmp(model, "F3Sa", 4) == 0)
+		return F3Sa;
 	else
 		return END_MODEL;
 }
_

Re: [patch 2/7] acpi4asus: add support for F3Sa

[Len Brown]

applied.

thanks,
-len

On Tuesday 05 February 2008 02:31, akpm@linux-foundation.org wrote:
> From: Luca Tettamanti <kronos.it@gmail.com>
> 
> Add support for ASUS F3Sa notebook. Features:
> - LCD on/off
> - Brightness
> - Wifi kill
> - Bluetooth kill
> 
> Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
> Cc: Corentin Chary <corentincj@iksaif.net>
> Cc: Karol Kozimor <sziwan@users.sourceforge.net>
> Cc: Len Brown <lenb@kernel.org>
> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
> ---
> 
>  drivers/acpi/asus_acpi.c |   55 ++++++++++++++++++++++++++++++-------
>  1 file changed, 45 insertions(+), 10 deletions(-)
> 
> diff -puN drivers/acpi/asus_acpi.c~acpi4asus-add-support-for-f3sa drivers/acpi/asus_acpi.c
> --- a/drivers/acpi/asus_acpi.c~acpi4asus-add-support-for-f3sa
> +++ a/drivers/acpi/asus_acpi.c
> @@ -142,6 +142,7 @@ struct asus_hotk {
>  		xxN,		//M2400N, M3700N, M5200N, M6800N, S1300N, S5200N
>  		A4S,            //Z81sp
>  		//(Centrino)
> +		F3Sa,
>  		END_MODEL
>  	} model;		//Models currently supported
>  	u16 event_count[128];	//count for each event TODO make this better
> @@ -405,7 +406,20 @@ static struct model_data model_conf[END_
>  		.brightness_get    = "GPLV",
>  		.mt_bt_switch      = "BLED",
>  		.mt_wled           = "WLED"
> -	}
> +	},
> +
> +	{
> +		.name		= "F3Sa",
> +		.mt_bt_switch	= "BLED",
> +		.mt_wled	= "WLED",
> +		.mt_mled	= "MLED",
> +		.brightness_get	= "GPLV",
> +		.brightness_set	= "SPLV",
> +		.mt_lcd_switch	= "\\_SB.PCI0.SBRG.EC0._Q10",
> +		.lcd_status	= "\\_SB.PCI0.SBRG.EC0.RPIN",
> +		.display_get	= "\\ADVG",
> +		.display_set	= "SDSP",
> +	},
>  
>  };
>  
> @@ -710,15 +724,8 @@ static int get_lcd_state(void)
>  {
>  	int lcd = 0;
>  
> -	if (hotk->model != L3H) {
> -		/* We don't have to check anything if we are here */
> -		if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd))
> -			printk(KERN_WARNING
> -			       "Asus ACPI: Error reading LCD status\n");
> -
> -		if (hotk->model == L2D)
> -			lcd = ~lcd;
> -	} else {		/* L3H and the like have to be handled differently */
> +	if (hotk->model == L3H) {
> +		/* L3H and the like have to be handled differently */
>  		acpi_status status = 0;
>  		struct acpi_object_list input;
>  		union acpi_object mt_params[2];
> @@ -745,6 +752,32 @@ static int get_lcd_state(void)
>  		if (out_obj.type == ACPI_TYPE_INTEGER)
>  			/* That's what the AML code does */
>  			lcd = out_obj.integer.value >> 8;
> +	} else if (hotk->model == F3Sa) {
> +		unsigned long tmp;
> +		union acpi_object param;
> +		struct acpi_object_list input;
> +		acpi_status status;
> +
> +		/* Read pin 11 */
> +		param.type = ACPI_TYPE_INTEGER;
> +		param.integer.value = 0x11;
> +		input.count = 1;
> +		input.pointer = &param;
> +
> +		status = acpi_evaluate_integer(NULL, hotk->methods->lcd_status,
> +						&input, &tmp);
> +		if (status != AE_OK)
> +			return -1;
> +
> +		lcd = tmp;
> +	} else {
> +		/* We don't have to check anything if we are here */
> +		if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd))
> +			printk(KERN_WARNING
> +			       "Asus ACPI: Error reading LCD status\n");
> +
> +		if (hotk->model == L2D)
> +			lcd = ~lcd;
>  	}
>  
>  	return (lcd & 1);
> @@ -1134,6 +1167,8 @@ static int asus_model_match(char *model)
>  		return W5A;
>  	else if (strncmp(model, "A4S", 3) == 0)
>  		return A4S;
> +	else if (strncmp(model, "F3Sa", 4) == 0)
> +		return F3Sa;
>  	else
>  		return END_MODEL;
>  }
> _
> -
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>