From mboxrd@z Thu Jan 1 00:00:00 1970 From: Carlos Corbacho Subject: [PATCH 1/3] acer-wmi: Make device detection error messages more descriptive Date: Wed, 12 Mar 2008 20:12:50 +0000 Message-ID: <20080312201249.2071.93005.stgit@pacifica> References: <20080312201238.2071.31534.stgit@pacifica> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Return-path: Received: from bb-87-81-255-5.ukonline.co.uk ([87.81.255.5]:45899 "EHLO pacifica" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752514AbYCLUNK (ORCPT ); Wed, 12 Mar 2008 16:13:10 -0400 In-Reply-To: <20080312201238.2071.31534.stgit@pacifica> Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: linux-acpi@vger.kernel.org Cc: lenb@kernel.org The current device detection error messages are all copy & pasted - make them more descriptive so it's easier to see where in the code a problem occurs. Signed-off-by: Carlos Corbacho --- drivers/misc/acer-wmi.c | 12 +++++++----- 1 files changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c index 89439ac..89d346b 100644 --- a/drivers/misc/acer-wmi.c +++ b/drivers/misc/acer-wmi.c @@ -1052,11 +1052,12 @@ static int __init acer_wmi_init(void) if (wmi_has_guid(WMID_GUID2) && interface) { if (ACPI_FAILURE(WMID_set_capabilities())) { - printk(ACER_ERR "Unable to detect available devices\n"); + printk(ACER_ERR "Unable to detect available WMID " + "devices\n"); return -ENODEV; } } else if (!wmi_has_guid(WMID_GUID2) && interface) { - printk(ACER_ERR "Unable to detect available devices\n"); + printk(ACER_ERR "No WMID device detection method found\n"); return -ENODEV; } @@ -1064,7 +1065,8 @@ static int __init acer_wmi_init(void) interface = &AMW0_interface; if (ACPI_FAILURE(AMW0_set_capabilities())) { - printk(ACER_ERR "Unable to detect available devices\n"); + printk(ACER_ERR "Unable to detect available AMW0 " + "devices\n"); return -ENODEV; } } @@ -1075,8 +1077,8 @@ static int __init acer_wmi_init(void) find_quirks(); if (!interface) { - printk(ACER_ERR "No or unsupported WMI interface, unable to "); - printk(KERN_CONT "load.\n"); + printk(ACER_ERR "No or unsupported WMI interface, unable to " + "load\n"); return -ENODEV; }