Re: Problems with mainboard INTEL D201GLY2A, pci devices only available with acpi=noirq

Re: Problems with mainboard INTEL D201GLY2A, pci devices only available with acpi=noirq

[Andrew Morton]

On Wed, 14 May 2008 07:58:42 +0200 Robert Goldner <robert@au-79.de> wrote:

> I use a INTEL D201GLY2A mainboard, and after serveral trys PCI devices 
> were only useable (not visable) with the boot-parameter acpi=noirq (or 
> noacpi). I tryed several kernel-versions (stated with 2.6.22), and no 
> sucess without his parameter.
> Without acpi=noirq all pci devices are deteced well, but if you want to 
> use them, there is no response.
> 
> So, now some (as I thnik) relevant informations:
> lspci
> 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 662 Host (rev 01)
> 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port
> 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL
> 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev
> 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS]
> 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1
> 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1
> 00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.1
> 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0
> 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI
> 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA (rev 01)
> 00:06.0 Ethernet controller: Atheros Communications Inc. AR5212/AR5213
> 00:1f.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
> 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
> 
> 
> .config (I did not attach all information about drivers, because I don__t 
> think that this is relevant)

Probably your best approach will be to raise a report against acpi at
bugzilla.kernel.org, please.  These things do get fixed, but it takes
some time.

Thanks.