Re: cpufreq limits avilable frequencies to 800MHz on git kernel

public inbox for linux-acpi@vger.kernel.org
 help / color / mirror / Atom feed

* Re: cpufreq limits avilable frequencies to 800MHz on git kernel
       [not found]     ` <200805260907.05561.arekm@maven.pl>
@ 2008-05-26 11:37       ` Thomas Renninger
  2008-05-26 16:15         ` Arkadiusz Miskiewicz
  0 siblings, 1 reply; 7+ messages in thread
From: Thomas Renninger @ 2008-05-26 11:37 UTC (permalink / raw)
  To: Arkadiusz Miskiewicz
  Cc: linux-kernel, cpufreq, Andrew Morton, gnorton, miguel, linux-acpi

On Mon, 2008-05-26 at 09:07 +0200, Arkadiusz Miskiewicz wrote:
> On Sunday 25 May 2008, Thomas Renninger wrote:
> > On Sun, 2008-05-25 at 11:36 +0200, Arkadiusz Miskiewicz wrote:
> > > On Saturday 24 May 2008, Andrew Morton wrote:
> > > > On Fri, 23 May 2008 19:44:57 +0200 Arkadiusz Miskiewicz
> > > > <arekm@maven.pl>
> > >
> > > wrote:
> > > > > thinkpad z60m, Intel(R) Pentium(R) M processor 2.00GHz. kernel from
> > > > > git from 1-2 days ago.
> > > > >
> > > > > Unfortunately it seems that suspend to ram/resume causes frequency
> > > > > to be limited to 800MHz only. I can't set it to 2GHz again :-/
> > > > >
> > > > > scaling_max_freq is then 800000 and cannot be changed.
> > > > >
> > > > > reboot and the problem disappears until new suspend/resume cycle.
> > > > >
> > > > > cpufreq stuff is driven by acpi-cpufreq
> > > > >
> > > > > $ cpufreq-info
> > > > > cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006
> > > > > Report errors and bugs to linux@brodo.de, please.
> > > > > analyzing CPU 0:
> > > > >   driver: acpi-cpufreq
> > > > >   CPUs which need to switch frequency at the same time: 0
> > > > >   hardware limits: 800 MHz - 2.00 GHz
> > > > >   available frequency steps: 2.00 GHz, 1.60 GHz, 1.33 GHz, 1.07 GHz,
> > > > > 800 MHz available cpufreq governors: powersave, userspace, ondemand,
> > > > > performance current policy: frequency should be within 800 MHz and
> > > > > 800 MHz. The governor "performance" may decide which speed to use
> > > > > within this range.
> > > > >   current CPU frequency is 800 MHz.
> > > > >
> > > > > /sys/devices/system/cpu/cpu0/cpufreq/affected_cpus:0
> > > > > /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq:800000
> > > > > /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq:2000000
> > > > > /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq:800000
> > > > > /sys/devices/system/cpu/cpu0/cpufreq/related_cpus:0
> > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies:20
> > > > >0000 0 1600000 1333000 1066000 800000
> > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors:powe
> > > > >rsav e userspace ondemand performance
> > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq:800000
> > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver:acpi-cpufreq
> > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor:performance
> > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq:800000
> > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq:800000
> > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed:<unsupported>
> > > >
> > > > Thanks.  Is this a newly-occurring bug or did earlier kernels do this
> > > > also?
> > > >
> > > > If it was newly added, do you know in which kernel version we might
> > > > have added it?
> > >
> > > I wasn't able to reproduce the problem on final 2.6.24 but was able to
> > > reproduce on final 2.6.25. Problem introduced somewhere between it seems.
> > >
> > > Note that 2-3 suspend to ram/resume cycles is needed to get into the
> > > problem.
> >
> > Sounds related to:
> > [Bug 374099] T61p speedstep problems (ondemand scheduler)
> > https://bugzilla.novell.com/show_bug.cgi?id=374099
> 
> login/pass protected
> 
> >
> > Miguel speaks from "good boots" and "bad boots".
> 
> Actually I also got "bad boot" (so no suspend/resume was needed).
> 
> >
> > Could you check whether the OS thinks it is too hot.
> > I described some basics how to monitor temperature and cpufreq (if
> > passive cooling kicks in) here:
> > https://bugzilla.novell.com/show_bug.cgi?id=387702#c13
> 
> Doesn't seem to be overheated
> 
> [arekm@tarm ~]$ cat /proc/acpi/thermal_zone/*/{temperature,trip_points,state}; cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_{cur_freq,max_freq}
> temperature:             45 C
> critical (S5):           99 C
> passive:                 95 C: tc1=5 tc2=4 tsp=600 devices= CPU
> state:                   ok
> 800000
> 800000
> 
> but still limited to 800MHz.
> 
> >
> > Hmm, it may just have been fixed by this one:
> > commit e56a727b023d40d1adf660168883f30f2e6abe0a
> > Author: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
> > Date:   Mon Apr 28 15:13:43 2008 -0400
> >
> > Miguel, Geoff: This is already in 11.0 for some time and in 10.3 for
> > some days.
> 
> Unfortunately it doesn't fix the problem. The patch is in Linus tree for long
> time (so I guess I had it when initially reporting the problem) + I upgraded
> today to current git - the problem is still there.

Yep, Dells and some HP should be fixed, it would have been strange if
ThinkPads are now also affected, but thanks for double checking, it
shows the same symptoms.

Then it might be _PPC.
If you compile in CPUFREQ_DEBUG and add the boot param:
cpufreq.debug=7
you should see a message in dmesg (if you do not see one, then
everything is fine you have a "good boot" and freq should be at max?):
cpufreq_printk("CPU %d: _PPC is %d - frequency %s limited\n", pr->id,
                       (int)ppc, ppc ? "" : "not");

If PPC is zero all frequencies are allowed, if it is one max_freq will
be set to the second highest freq, etc.

If it's that you can workaround that (temporarily, pls help evaluating
this further) you can use:
processor.ignore_ppc=1

I remember Ingo Molnar sent a patch to not always evaluate _PPC at
boot/initialization time, but only on processor notification events.
AFAIK this was a recent ThinkPad, so this might be it what you are
seeing. But nobody knew why some ThinkPads had a wrong _PPC value at
initialization time.

If this is PPC related, this is more an ACPI than a cpufreq issue ->
adding linux-acpi list.

   Thomas

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: cpufreq limits avilable frequencies to 800MHz on git kernel
  2008-05-26 11:37       ` cpufreq limits avilable frequencies to 800MHz on git kernel Thomas Renninger
@ 2008-05-26 16:15         ` Arkadiusz Miskiewicz
  2008-05-26 16:23           ` Arkadiusz Miskiewicz
  2008-05-27  9:35           ` Thomas Renninger
  0 siblings, 2 replies; 7+ messages in thread
From: Arkadiusz Miskiewicz @ 2008-05-26 16:15 UTC (permalink / raw)
  To: linux-kernel, trenn; +Cc: cpufreq, Andrew Morton, gnorton, miguel, linux-acpi

On Monday 26 May 2008, Thomas Renninger wrote:
> On Mon, 2008-05-26 at 09:07 +0200, Arkadiusz Miskiewicz wrote:
> > On Sunday 25 May 2008, Thomas Renninger wrote:
> > > On Sun, 2008-05-25 at 11:36 +0200, Arkadiusz Miskiewicz wrote:
> > > > On Saturday 24 May 2008, Andrew Morton wrote:
> > > > > On Fri, 23 May 2008 19:44:57 +0200 Arkadiusz Miskiewicz
> > > > > <arekm@maven.pl>
> > > >
> > > > wrote:
> > > > > > thinkpad z60m, Intel(R) Pentium(R) M processor 2.00GHz. kernel
> > > > > > from git from 1-2 days ago.
> > > > > >
> > > > > > Unfortunately it seems that suspend to ram/resume causes
> > > > > > frequency to be limited to 800MHz only. I can't set it to 2GHz
> > > > > > again :-/
> > > > > >
> > > > > > scaling_max_freq is then 800000 and cannot be changed.
> > > > > >
> > > > > > reboot and the problem disappears until new suspend/resume cycle.
> > > > > >
> > > > > > cpufreq stuff is driven by acpi-cpufreq
> > > > > >
> > > > > > $ cpufreq-info
> > > > > > cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006
> > > > > > Report errors and bugs to linux@brodo.de, please.
> > > > > > analyzing CPU 0:
> > > > > >   driver: acpi-cpufreq
> > > > > >   CPUs which need to switch frequency at the same time: 0
> > > > > >   hardware limits: 800 MHz - 2.00 GHz
> > > > > >   available frequency steps: 2.00 GHz, 1.60 GHz, 1.33 GHz, 1.07
> > > > > > GHz, 800 MHz available cpufreq governors: powersave, userspace,
> > > > > > ondemand, performance current policy: frequency should be within
> > > > > > 800 MHz and 800 MHz. The governor "performance" may decide which
> > > > > > speed to use within this range.
> > > > > >   current CPU frequency is 800 MHz.
> > > > > >
> > > > > > /sys/devices/system/cpu/cpu0/cpufreq/affected_cpus:0
> > > > > > /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq:800000
> > > > > > /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq:2000000
> > > > > > /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq:800000
> > > > > > /sys/devices/system/cpu/cpu0/cpufreq/related_cpus:0
> > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencie
> > > > > >s:20 0000 0 1600000 1333000 1066000 800000
> > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors:
> > > > > >powe rsav e userspace ondemand performance
> > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq:800000
> > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver:acpi-cpufreq
> > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor:performance
> > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq:800000
> > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq:800000
> > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed:<unsupporte
> > > > > >d>
> > > > >
> > > > > Thanks.  Is this a newly-occurring bug or did earlier kernels do
> > > > > this also?
> > > > >
> > > > > If it was newly added, do you know in which kernel version we might
> > > > > have added it?
> > > >
> > > > I wasn't able to reproduce the problem on final 2.6.24 but was able
> > > > to reproduce on final 2.6.25. Problem introduced somewhere between it
> > > > seems.
> > > >
> > > > Note that 2-3 suspend to ram/resume cycles is needed to get into the
> > > > problem.
> > >
> > > Sounds related to:
> > > [Bug 374099] T61p speedstep problems (ondemand scheduler)
> > > https://bugzilla.novell.com/show_bug.cgi?id=374099
> >
> > login/pass protected
> >
> > > Miguel speaks from "good boots" and "bad boots".
> >
> > Actually I also got "bad boot" (so no suspend/resume was needed).
> >
> > > Could you check whether the OS thinks it is too hot.
> > > I described some basics how to monitor temperature and cpufreq (if
> > > passive cooling kicks in) here:
> > > https://bugzilla.novell.com/show_bug.cgi?id=387702#c13
> >
> > Doesn't seem to be overheated
> >
> > [arekm@tarm ~]$ cat
> > /proc/acpi/thermal_zone/*/{temperature,trip_points,state}; cat
> > /sys/devices/system/cpu/cpu*/cpufreq/scaling_{cur_freq,max_freq}
> > temperature:             45 C
> > critical (S5):           99 C
> > passive:                 95 C: tc1=5 tc2=4 tsp=600 devices= CPU
> > state:                   ok
> > 800000
> > 800000
> >
> > but still limited to 800MHz.
> >
> > > Hmm, it may just have been fixed by this one:
> > > commit e56a727b023d40d1adf660168883f30f2e6abe0a
> > > Author: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
> > > Date:   Mon Apr 28 15:13:43 2008 -0400
> > >
> > > Miguel, Geoff: This is already in 11.0 for some time and in 10.3 for
> > > some days.
> >
> > Unfortunately it doesn't fix the problem. The patch is in Linus tree for
> > long time (so I guess I had it when initially reporting the problem) + I
> > upgraded today to current git - the problem is still there.
>
> Yep, Dells and some HP should be fixed, it would have been strange if
> ThinkPads are now also affected, but thanks for double checking, it
> shows the same symptoms.
>
> Then it might be _PPC.
> If you compile in CPUFREQ_DEBUG and add the boot param:
> cpufreq.debug=7
> you should see a message in dmesg (if you do not see one, then
> everything is fine you have a "good boot" and freq should be at max?):
> cpufreq_printk("CPU %d: _PPC is %d - frequency %s limited\n", pr->id,
>                        (int)ppc, ppc ? "" : "not");
>
> If PPC is zero all frequencies are allowed, if it is one max_freq will
> be set to the second highest freq, etc.
>
> If it's that you can workaround that (temporarily, pls help evaluating
> this further) you can use:
> processor.ignore_ppc=1
>
> I remember Ingo Molnar sent a patch to not always evaluate _PPC at
> boot/initialization time, but only on processor notification events.
> AFAIK this was a recent ThinkPad, so this might be it what you are
> seeing. But nobody knew why some ThinkPads had a wrong _PPC value at
> initialization time.
>
> If this is PPC related, this is more an ACPI than a cpufreq issue ->
> adding linux-acpi list.

Ok, there is something, see:

[ 4093.625227] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
[ 4095.755272] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
[ 4095.755508] acpi-cpufreq: acpi_cpufreq_verify
[ 4095.755642] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
[ 4095.755780] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
[ 4095.755916] acpi-cpufreq: acpi_cpufreq_verify
[ 4095.756042] freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
[ 4095.756179] freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
[ 4095.756314] cpufreq-core: new min and max freqs are 800000 - 800000 kHz

PPC related messages are:

$ dmesg|grep PPC
[ 3597.291342] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
[ 3721.943484] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
[ 3881.874373] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
[ 4216.175414] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited


complete log from boot:

May 26 19:02:28 tarm kernel: [    6.125186] input: Video Bus as /class/input/input5
May 26 19:02:28 tarm kernel: [    6.145244] usbcore: registered new interface driver usbfs
May 26 19:02:28 tarm kernel: [    6.145273] usbcore: registered new interface driver hub
May 26 19:02:28 tarm kernel: [    6.145305] usbcore: registered new device driver usb
May 26 19:02:28 tarm kernel: [    6.153013] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
May 26 19:02:28 tarm kernel: [    6.153349] input: Video Bus as /class/input/input6
May 26 19:02:28 tarm kernel: [    6.177267] USB Universal Host Controller Interface driver v3.0
May 26 19:02:28 tarm kernel: [    6.177320] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 19:02:28 tarm kernel: [    6.177330] PCI: Setting latency timer of device 0000:00:1d.0 to 64
May 26 19:02:28 tarm kernel: [    6.177334] uhci_hcd 0000:00:1d.0: UHCI Host Controller
May 26 19:02:28 tarm kernel: [    6.177561] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
May 26 19:02:28 tarm kernel: [    6.177595] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
May 26 19:02:28 tarm kernel: [    6.177715] usb usb1: configuration #1 chosen from 1 choice
May 26 19:02:28 tarm kernel: [    6.177742] hub 1-0:1.0: USB hub found
May 26 19:02:28 tarm kernel: [    6.177748] hub 1-0:1.0: 2 ports detected
May 26 19:02:28 tarm kernel: [    6.178737] iTCO_vendor_support: vendor-support=0
May 26 19:02:28 tarm kernel: [    6.184998] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
May 26 19:02:28 tarm kernel: [    6.195516] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
May 26 19:02:28 tarm kernel: [    6.195591] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
May 26 19:02:28 tarm kernel: [    6.195619] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
May 26 19:02:28 tarm kernel: [    6.235056] intel_rng: FWH not detected
May 26 19:02:28 tarm kernel: [    6.281041] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
May 26 19:02:28 tarm kernel: [    6.281045] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 19:02:28 tarm kernel: [    6.281048] usb usb1: Product: UHCI Host Controller
May 26 19:02:28 tarm kernel: [    6.281050] usb usb1: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 19:02:28 tarm kernel: [    6.281052] usb usb1: SerialNumber: 0000:00:1d.0
May 26 19:02:28 tarm kernel: [    6.281661] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
May 26 19:02:28 tarm kernel: [    6.281678] PCI: Setting latency timer of device 0000:00:1d.7 to 64
May 26 19:02:28 tarm kernel: [    6.281682] ehci_hcd 0000:00:1d.7: EHCI Host Controller
May 26 19:02:29 tarm kernel: [    6.281707] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
May 26 19:02:29 tarm kernel: [    6.285625] ehci_hcd 0000:00:1d.7: debug port 1
May 26 19:02:29 tarm kernel: [    6.285631] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
May 26 19:02:29 tarm kernel: [    6.285645] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb0004000
May 26 19:02:29 tarm kernel: [    6.292413] sd 0:0:0:0: Attached scsi generic sg0 type 0
May 26 19:02:29 tarm kernel: [    6.292434] sr 1:0:0:0: Attached scsi generic sg1 type 5
May 26 19:02:29 tarm kernel: [    6.300973] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
May 26 19:02:29 tarm kernel: [    6.301079] usb usb2: configuration #1 chosen from 1 choice
May 26 19:02:29 tarm kernel: [    6.301111] hub 2-0:1.0: USB hub found
May 26 19:02:29 tarm kernel: [    6.301118] hub 2-0:1.0: 8 ports detected
May 26 19:02:29 tarm kernel: [    6.405649] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
May 26 19:02:29 tarm kernel: [    6.405653] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 19:02:29 tarm kernel: [    6.405656] usb usb2: Product: EHCI Host Controller
May 26 19:02:29 tarm kernel: [    6.405658] usb usb2: Manufacturer: Linux 2.6.26-rc3 ehci_hcd
May 26 19:02:29 tarm kernel: [    6.405660] usb usb2: SerialNumber: 0000:00:1d.7
May 26 19:02:29 tarm kernel: [    6.405688] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
May 26 19:02:29 tarm kernel: [    6.405698] PCI: Setting latency timer of device 0000:00:1d.1 to 64
May 26 19:02:29 tarm kernel: [    6.405702] uhci_hcd 0000:00:1d.1: UHCI Host Controller
May 26 19:02:29 tarm kernel: [    6.405724] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
May 26 19:02:29 tarm kernel: [    6.405759] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
May 26 19:02:29 tarm kernel: [    6.405862] usb usb3: configuration #1 chosen from 1 choice
May 26 19:02:29 tarm kernel: [    6.405887] hub 3-0:1.0: USB hub found
May 26 19:02:29 tarm kernel: [    6.405895] hub 3-0:1.0: 2 ports detected
May 26 19:02:29 tarm kernel: [    6.509042] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
May 26 19:02:29 tarm kernel: [    6.509047] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 19:02:29 tarm kernel: [    6.509049] usb usb3: Product: UHCI Host Controller
May 26 19:02:29 tarm kernel: [    6.509052] usb usb3: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 19:02:29 tarm kernel: [    6.509054] usb usb3: SerialNumber: 0000:00:1d.1
May 26 19:02:29 tarm kernel: [    6.509104] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
May 26 19:02:29 tarm kernel: [    6.509115] PCI: Setting latency timer of device 0000:00:1d.2 to 64
May 26 19:02:29 tarm kernel: [    6.509118] uhci_hcd 0000:00:1d.2: UHCI Host Controller
May 26 19:02:29 tarm kernel: [    6.509141] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
May 26 19:02:29 tarm kernel: [    6.509173] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
May 26 19:02:29 tarm kernel: [    6.509274] usb usb4: configuration #1 chosen from 1 choice
May 26 19:02:29 tarm kernel: [    6.509301] hub 4-0:1.0: USB hub found
May 26 19:02:29 tarm kernel: [    6.509308] hub 4-0:1.0: 2 ports detected
May 26 19:02:29 tarm kernel: [    6.588120] ieee80211_crypt: registered algorithm 'NULL'
May 26 19:02:29 tarm kernel: [    6.591780] hub 2-0:1.0: unable to enumerate USB device on port 3
May 26 19:02:29 tarm kernel: [    6.601591] ieee80211: 802.11 data/management/control stack, git-1.1.13
May 26 19:02:29 tarm kernel: [    6.601594] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
May 26 19:02:29 tarm kernel: [    6.613037] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
May 26 19:02:29 tarm kernel: [    6.613041] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 19:02:29 tarm kernel: [    6.613044] usb usb4: Product: UHCI Host Controller
May 26 19:02:29 tarm kernel: [    6.613046] usb usb4: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 19:02:29 tarm kernel: [    6.613048] usb usb4: SerialNumber: 0000:00:1d.2
May 26 19:02:29 tarm kernel: [    6.613095] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
May 26 19:02:29 tarm kernel: [    6.613106] PCI: Setting latency timer of device 0000:00:1d.3 to 64
May 26 19:02:29 tarm kernel: [    6.613109] uhci_hcd 0000:00:1d.3: UHCI Host Controller
May 26 19:02:29 tarm kernel: [    6.613132] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
May 26 19:02:29 tarm kernel: [    6.613158] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
May 26 19:02:29 tarm kernel: [    6.613261] usb usb5: configuration #1 chosen from 1 choice
May 26 19:02:29 tarm kernel: [    6.613287] hub 5-0:1.0: USB hub found
May 26 19:02:29 tarm kernel: [    6.613292] hub 5-0:1.0: 2 ports detected
May 26 19:02:29 tarm kernel: [    6.641371] sdhci: Secure Digital Host Controller Interface driver
May 26 19:02:29 tarm kernel: [    6.641375] sdhci: Copyright(c) Pierre Ossman
May 26 19:02:29 tarm kernel: [    6.686967] input: PC Speaker as /class/input/input7
May 26 19:02:29 tarm kernel: [    6.717153] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
May 26 19:02:29 tarm kernel: [    6.717156] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 19:02:29 tarm kernel: [    6.717159] usb usb5: Product: UHCI Host Controller
May 26 19:02:29 tarm kernel: [    6.717161] usb usb5: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 19:02:29 tarm kernel: [    6.717163] usb usb5: SerialNumber: 0000:00:1d.3
May 26 19:02:29 tarm kernel: [    6.717637] Yenta: CardBus bridge found at 0000:14:00.0 [1014:056c]
May 26 19:02:29 tarm kernel: [    6.727391] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 19:02:29 tarm kernel: [    6.727398] hda_intel: probe_mask set to 0x1 for device 1014:05b7
May 26 19:02:29 tarm kernel: [    6.727416] PCI: Setting latency timer of device 0000:00:1b.0 to 64
May 26 19:02:29 tarm kernel: [    6.828993] hub 2-0:1.0: unable to enumerate USB device on port 5
May 26 19:02:29 tarm kernel: [    6.843641] NET: Registered protocol family 23
May 26 19:02:29 tarm kernel: [    6.845789] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
May 26 19:02:29 tarm kernel: [    6.845794] Socket status: 30000006
May 26 19:02:29 tarm kernel: [    6.845797] pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff
May 26 19:02:29 tarm kernel: [    6.845801] pcmcia: parent PCI bridge Memory window: 0xb8000000 - 0xc00fffff
May 26 19:02:29 tarm kernel: [    6.845803] pcmcia: parent PCI bridge Memory window: 0xd8000000 - 0xdfffffff
May 26 19:02:29 tarm kernel: [    6.847886] ACPI: PCI Interrupt 0000:14:00.1[B] -> GSI 17 (level, low) -> IRQ 17
May 26 19:02:29 tarm kernel: [    6.903799] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[c0001000-c00017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
May 26 19:02:29 tarm kernel: [    6.912962] sdhci: SDHCI controller found at 0000:14:00.2 [1180:0822] (rev 17)
May 26 19:02:29 tarm kernel: [    6.912962] ACPI: PCI Interrupt 0000:14:00.2[C] -> GSI 18 (level, low) -> IRQ 18
May 26 19:02:29 tarm kernel: [    6.913507] mmc0: Will use DMA mode even though HW doesn't fully claim to support it.
May 26 19:02:29 tarm kernel: [    6.915539] mmc0: SDHCI at 0xc0001800 irq 18 DMA
May 26 19:02:29 tarm kernel: [    6.972114] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
May 26 19:02:29 tarm kernel: [    6.972118] ipw2200: Copyright(c) 2003-2006 Intel Corporation
May 26 19:02:29 tarm kernel: [    6.972191] ACPI: PCI Interrupt 0000:14:02.0[A] -> GSI 21 (level, low) -> IRQ 21
May 26 19:02:29 tarm kernel: [    6.972331] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
May 26 19:02:29 tarm kernel: [    6.972369] firmware: requesting ipw2200-bss.fw
May 26 19:02:29 tarm kernel: [    7.033926] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
May 26 19:02:29 tarm kernel: [    7.033950] rtc0: alarms up to one month, y3k
May 26 19:02:29 tarm kernel: [    7.068998] hub 2-0:1.0: unable to enumerate USB device on port 6
May 26 19:02:29 tarm kernel: [    7.156205] Marking TSC unstable due to: TSC halts in idle.
May 26 19:02:29 tarm kernel: [    7.300154] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
May 26 19:02:29 tarm kernel: [    7.300154] serio: Synaptics pass-through port at isa0060/serio1/input0
May 26 19:02:29 tarm kernel: [    7.308981] usb 3-1: new low speed USB device using uhci_hcd and address 2
May 26 19:02:29 tarm kernel: [    7.349544] input: SynPS/2 Synaptics TouchPad as /class/input/input8
May 26 19:02:29 tarm kernel: [    7.375433] nsc-ircc 00:09: activated
May 26 19:02:29 tarm kernel: [    7.375433] nsc-ircc, chip->init
May 26 19:02:29 tarm kernel: [    7.375433] nsc-ircc, Found chip at base=0x164e
May 26 19:02:29 tarm kernel: [    7.375433] nsc-ircc, driver loaded (Dag Brattli)
May 26 19:02:29 tarm kernel: [    7.482233] usb 3-1: configuration #1 chosen from 1 choice
May 26 19:02:29 tarm kernel: [    7.485325] usb 3-1: New USB device found, idVendor=046d, idProduct=c404
May 26 19:02:29 tarm kernel: [    7.485328] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 19:02:29 tarm kernel: [    7.485331] usb 3-1: Product: Trackball
May 26 19:02:29 tarm kernel: [    7.485333] usb 3-1: Manufacturer: Logitech
May 26 19:02:29 tarm kernel: [    7.729656] usb 4-1: new full speed USB device using uhci_hcd and address 2
May 26 19:02:29 tarm kernel: [    7.807997] IrDA: Registered device irda0
May 26 19:02:29 tarm kernel: [    7.808001] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
May 26 19:02:29 tarm kernel: [    7.808876] ipw2200: Detected geography ZZE (13 802.11bg channels, 19 802.11a channels)
May 26 19:02:29 tarm kernel: [    7.808903] ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
May 26 19:02:29 tarm kernel: [    7.904151] usb 4-1: configuration #1 chosen from 1 choice
May 26 19:02:29 tarm kernel: [    7.906821] usb 4-1: New USB device found, idVendor=0a5c, idProduct=2110
May 26 19:02:29 tarm kernel: [    7.906825] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 19:02:29 tarm kernel: [    7.906828] usb 4-1: Product: BCM2045B
May 26 19:02:29 tarm kernel: [    7.906830] usb 4-1: Manufacturer: Broadcom Corp
May 26 19:02:29 tarm kernel: [    8.004787] Bluetooth: Core ver 2.11
May 26 19:02:29 tarm kernel: [    8.005609] NET: Registered protocol family 31
May 26 19:02:29 tarm kernel: [    8.005612] Bluetooth: HCI device and connection manager initialized
May 26 19:02:29 tarm kernel: [    8.005615] Bluetooth: HCI socket layer initialized
May 26 19:02:29 tarm kernel: [    8.134262] Bluetooth: HCI USB driver ver 2.9
May 26 19:02:29 tarm kernel: [    8.147365] usb 4-2: new full speed USB device using uhci_hcd and address 3
May 26 19:02:29 tarm kernel: [    8.181089] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00061b002020c273]
May 26 19:02:29 tarm kernel: [    8.319993] usb 4-2: configuration #1 chosen from 1 choice
May 26 19:02:29 tarm kernel: [    8.326293] usb 4-2: New USB device found, idVendor=0483, idProduct=2016
May 26 19:02:29 tarm kernel: [    8.326296] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 19:02:29 tarm kernel: [    8.326299] usb 4-2: Product: Biometric Coprocessor
May 26 19:02:29 tarm kernel: [    8.326301] usb 4-2: Manufacturer: STMicroelectronics
May 26 19:02:29 tarm kernel: [    8.326339] usbcore: registered new interface driver hiddev
May 26 19:02:29 tarm kernel: [    8.328311] usbcore: registered new interface driver hci_usb
May 26 19:02:29 tarm kernel: [    8.346436] input: Logitech Trackball as /class/input/input9
May 26 19:02:29 tarm kernel: [    8.373046] input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.1-1
May 26 19:02:29 tarm kernel: [    8.373071] usbcore: registered new interface driver usbhid
May 26 19:02:29 tarm kernel: [    8.373074] usbhid: v2.6:USB HID core driver
May 26 19:02:29 tarm kernel: [    8.951994] Bluetooth: L2CAP ver 2.9
May 26 19:02:29 tarm kernel: [    8.951994] Bluetooth: L2CAP socket layer initialized
May 26 19:02:29 tarm kernel: [    8.985031] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
May 26 19:02:29 tarm kernel: [    9.063318] Bluetooth: RFCOMM socket layer initialized
May 26 19:02:29 tarm kernel: [    9.063327] Bluetooth: RFCOMM TTY layer initialized
May 26 19:02:29 tarm kernel: [    9.063329] Bluetooth: RFCOMM ver 1.8
May 26 19:02:29 tarm kernel: [   13.393047] IBM TrackPoint firmware: 0x0e, buttons: 3/3
May 26 19:02:29 tarm kernel: [   13.652587] input: TPPS/2 IBM TrackPoint as /class/input/input10
May 26 19:02:29 tarm kernel: [   39.175406] tun: Universal TUN/TAP device driver, 1.6
May 26 19:02:29 tarm kernel: [   39.175406] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
May 26 19:02:29 tarm kernel: [   39.338274] hdaps: IBM ThinkPad Z60m detected.
May 26 19:02:29 tarm kernel: [   39.338274] hdaps: initial latch check good (0x01).
May 26 19:02:29 tarm kernel: [   39.541424] hdaps: device successfully initialized.
May 26 19:02:29 tarm kernel: [   39.541912] input: hdaps as /class/input/input11
May 26 19:02:29 tarm kernel: [   39.569007] hdaps: driver successfully loaded.
May 26 19:02:29 tarm kernel: [   39.682552] acpi-cpufreq: acpi_cpufreq_init
May 26 19:02:29 tarm kernel: [   39.682552] acpi-cpufreq: acpi_cpufreq_early_init
May 26 19:02:29 tarm kernel: [   39.682552] cpufreq-core: trying to register driver acpi-cpufreq
May 26 19:02:29 tarm kernel: [   39.682552] cpufreq-core: adding CPU 0
May 26 19:02:29 tarm kernel: [   39.682552] acpi-cpufreq: acpi_cpufreq_cpu_init
May 26 19:02:29 tarm kernel: [   39.682552] acpi-cpufreq: HARDWARE addr space
May 26 19:02:29 tarm kernel: [   39.682552] freq-table: table entry 0: 2000000 kHz, 0 index
May 26 19:02:29 tarm kernel: [   39.682552] freq-table: table entry 1: 1600000 kHz, 1 index
May 26 19:02:29 tarm kernel: [   39.682552] freq-table: table entry 2: 1333000 kHz, 2 index
May 26 19:02:29 tarm kernel: [   39.682552] freq-table: table entry 3: 1066000 kHz, 3 index
May 26 19:02:29 tarm kernel: [   39.682552] freq-table: table entry 4: 800000 kHz, 4 index
May 26 19:02:29 tarm kernel: [   39.682552] acpi-cpufreq: get_cur_freq_on_cpu (0)
May 26 19:02:29 tarm kernel: [   39.682552] acpi-cpufreq: get_cur_val = 100667177
May 26 19:02:29 tarm kernel: [   39.682552] acpi-cpufreq: cur freq = 2000000
May 26 19:02:29 tarm kernel: [   39.682552] acpi-cpufreq: CPU0 - ACPI performance management activated.
May 26 19:02:29 tarm kernel: [   39.682552] acpi-cpufreq:      *P0: 2000 MHz, 27000 mW, 500 uS
May 26 19:02:29 tarm kernel: [   39.682552] acpi-cpufreq:       P1: 1600 MHz, 22600 mW, 500 uS
May 26 19:02:29 tarm kernel: [   39.682552] acpi-cpufreq:       P2: 1333 MHz, 19666 mW, 500 uS
May 26 19:02:29 tarm kernel: [   39.682552] acpi-cpufreq:       P3: 1066 MHz, 16733 mW, 500 uS
May 26 19:02:29 tarm kernel: [   39.682552] acpi-cpufreq:       P4: 800 MHz, 13800 mW, 500 uS
May 26 19:02:29 tarm kernel: [   39.682552] freq-table: setting show_table for cpu 0 to f7bb1440
May 26 19:02:29 tarm kernel: [   39.682552] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 19:02:29 tarm kernel: [   39.682552] acpi-cpufreq: acpi_cpufreq_verify
May 26 19:02:29 tarm kernel: [   39.682552] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 19:02:29 tarm kernel: [   39.682552] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 19:02:29 tarm kernel: [   39.682552] acpi-cpufreq: acpi_cpufreq_verify
May 26 19:02:29 tarm kernel: [   39.682552] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 19:02:29 tarm kernel: [   39.682552] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 19:02:29 tarm kernel: [   39.682552] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
May 26 19:02:29 tarm kernel: [   39.682552] cpufreq-core: governor switch
May 26 19:02:29 tarm kernel: [   39.682552] cpufreq-core: __cpufreq_governor for CPU 0, event 1
May 26 19:02:29 tarm kernel: [   39.682552] cpufreq-core: governor: change or update limits
May 26 19:02:29 tarm kernel: [   39.682552] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 19:02:29 tarm kernel: [   39.682552] cpufreq-core: initialization complete
May 26 19:02:29 tarm kernel: [   39.682552] cpufreq-core: driver acpi-cpufreq up and running
May 26 19:02:29 tarm kernel: [   39.722541] cpufreq-core: updating policy for CPU 0
May 26 19:02:29 tarm kernel: [   39.722541] acpi-cpufreq: get_cur_freq_on_cpu (0)
May 26 19:02:29 tarm kernel: [   39.722541] acpi-cpufreq: get_cur_val = 100667177
May 26 19:02:29 tarm kernel: [   39.722541] acpi-cpufreq: cur freq = 2000000
May 26 19:02:29 tarm kernel: [   39.722541] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 19:02:29 tarm kernel: [   39.722541] acpi-cpufreq: acpi_cpufreq_verify
May 26 19:02:29 tarm kernel: [   39.722541] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 19:02:29 tarm kernel: [   39.722541] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 19:02:29 tarm kernel: [   39.722541] acpi-cpufreq: acpi_cpufreq_verify
May 26 19:02:29 tarm kernel: [   39.722541] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 19:02:29 tarm kernel: [   39.722541] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 19:02:29 tarm kernel: [   39.722541] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
May 26 19:02:29 tarm kernel: [   39.722541] cpufreq-core: governor: change or update limits
May 26 19:02:29 tarm kernel: [   39.722541] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 19:02:29 tarm kernel: [   39.794929] IrCOMM protocol (Dag Brattli)
May 26 19:02:29 tarm kernel: [   39.961001] cpufreq-core: target for CPU 0: 857142 kHz, relation 0
May 26 19:02:29 tarm kernel: [   39.961005] acpi-cpufreq: acpi_cpufreq_target 857142 (0)
May 26 19:02:29 tarm kernel: [   39.961008] freq-table: request for target 857142 kHz (relation: 0) for cpu 0
May 26 19:02:29 tarm kernel: [   39.961011] freq-table: target is 3 (1066000 kHz, 3)
May 26 19:02:29 tarm kernel: [   39.961014] cpufreq-core: notification 0 of frequency transition to 1066000 kHz
May 26 19:02:29 tarm kernel: [   40.090458] fuse init (API version 7.9)
May 26 19:02:29 tarm kernel: [   40.340980] Clocksource tsc unstable (delta = -177391143 ns)
May 26 19:02:29 tarm kernel: [   50.829229] ieee80211_crypt: registered algorithm 'CCMP'
May 26 19:02:29 tarm kernel: [   50.980350] padlock: VIA PadLock not detected.
May 26 19:02:29 tarm kernel: [   51.063393] ieee80211_crypt: registered algorithm 'TKIP'
May 26 19:02:29 tarm kernel: [   56.612204] warning: `named' uses 32-bit capabilities (legacy support in use)
May 26 19:02:29 tarm kernel: [   56.811286] NET: Registered protocol family 10
May 26 19:02:29 tarm kernel: [   56.812249] lo: Disabled Privacy Extensions
May 26 19:02:29 tarm kernel: [   56.813322] ADDRCONF(NETDEV_UP): eth0: link is not ready
May 26 19:02:29 tarm kernel: [   57.135357] tun0: Disabled Privacy Extensions
May 26 19:02:29 tarm kernel: [   58.209229] Bluetooth: BNEP (Ethernet Emulation) ver 1.2
May 26 19:02:29 tarm kernel: [   58.209236] Bluetooth: BNEP filters: protocol multicast
May 26 19:02:29 tarm kernel: [   58.293509] Bridge firewalling registered
May 26 19:02:29 tarm kernel: [   58.293678] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
May 26 19:02:29 tarm kernel: [   58.295410] pan1: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
May 26 19:02:32 tarm kernel: [   61.577355] NET: Registered protocol family 15
May 26 19:02:32 tarm kernel: [   61.906798] padlock: VIA PadLock Hash Engine not detected.
May 26 19:02:33 tarm kernel: [   62.940989] __ratelimit: 10 messages suppressed
May 26 19:02:33 tarm kernel: [   62.941202] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 19:02:33 tarm kernel: [   62.941368] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 19:02:33 tarm kernel: [   62.941503] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 19:02:33 tarm kernel: [   62.941642] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:02:37 tarm kernel: [   67.236982] eth1: no IPv6 routers present
May 26 17:02:47 tarm kernel: [   77.110282] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 17:02:47 tarm kernel: [   77.110296] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:02:47 tarm kernel: [   77.110303] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:02:47 tarm kernel: [   77.110312] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:02:47 tarm kernel: [   77.110321] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:02:47 tarm kernel: [   77.110328] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:02:47 tarm kernel: [   77.110337] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:02:47 tarm kernel: [   77.110345] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
May 26 17:02:47 tarm kernel: [   77.110351] cpufreq-core: governor: change or update limits
May 26 17:02:47 tarm kernel: [   77.110358] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 17:02:49 tarm kernel: [   79.270059] [drm] Initialized drm 1.1.0 20060810
May 26 17:02:50 tarm kernel: [   79.290995] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:02:50 tarm kernel: [   79.292438] PCI: Setting latency timer of device 0000:01:00.0 to 64
May 26 17:02:50 tarm kernel: [   79.292722] [drm] Initialized radeon 1.28.0 20060524 on minor 0
May 26 17:02:50 tarm kernel: [   79.440996] __ratelimit: 17 messages suppressed
May 26 17:02:50 tarm kernel: [   79.441203] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:02:50 tarm kernel: [   79.441372] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:02:50 tarm kernel: [   79.441510] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:02:50 tarm kernel: [   79.940982] __ratelimit: 4 messages suppressed
May 26 17:02:50 tarm kernel: [   79.941048] cpufreq-core: target for CPU 0: 114285 kHz, relation 0
May 26 17:02:53 tarm kernel: [   82.345837] [drm] Setting GART location based on new memory map
May 26 17:02:53 tarm kernel: [   82.346717] [drm] Loading R300 Microcode
May 26 17:02:53 tarm kernel: [   82.346768] [drm] writeback test succeeded in 1 usecs
May 26 17:02:59 tarm kernel: [   88.441019] __ratelimit: 6 messages suppressed
May 26 17:02:59 tarm kernel: [   88.441285] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:03:09 tarm kernel: [   98.441553] __ratelimit: 20 messages suppressed
May 26 17:03:09 tarm kernel: [   98.441782] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:03:09 tarm kernel: [   98.441929] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:03:15 tarm kernel: [  104.940997] __ratelimit: 12 messages suppressed
May 26 17:03:15 tarm kernel: [  104.941215] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:03:15 tarm kernel: [  104.941385] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:03:20 tarm kernel: [  109.940992] __ratelimit: 33 messages suppressed
May 26 17:03:20 tarm kernel: [  109.941174] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:03:25 tarm kernel: [  114.940988] __ratelimit: 41 messages suppressed
May 26 17:03:25 tarm kernel: [  114.941124] cpufreq-core: target for CPU 0: 857142 kHz, relation 0
May 26 17:03:30 tarm kernel: [  119.941018] __ratelimit: 58 messages suppressed
May 26 17:03:30 tarm kernel: [  119.941213] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:03:35 tarm kernel: [  124.941049] __ratelimit: 39 messages suppressed
May 26 17:03:35 tarm kernel: [  124.941263] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:04:05 tarm kernel: [  154.941067] __ratelimit: 20 messages suppressed
May 26 17:04:05 tarm kernel: [  154.941286] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:04:05 tarm kernel: [  154.941433] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:04:05 tarm kernel: [  154.941573] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:04:05 tarm kernel: [  154.941718] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:04:05 tarm kernel: [  154.941854] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:04:05 tarm kernel: [  154.941997] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:04:13 tarm kernel: [  162.941008] __ratelimit: 8 messages suppressed
May 26 17:04:13 tarm kernel: [  162.941232] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:04:20 tarm kernel: [  169.441016] __ratelimit: 20 messages suppressed
May 26 17:04:20 tarm kernel: [  169.441253] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:04:21 tarm kernel: [  170.440990] __ratelimit: 6 messages suppressed
May 26 17:04:21 tarm kernel: [  170.441136] cpufreq-core: target for CPU 0: 800000 kHz, relation 0
May 26 17:04:26 tarm kernel: [  175.442070] __ratelimit: 20 messages suppressed
May 26 17:04:26 tarm kernel: [  175.442307] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:04:30 tarm kernel: [  179.941024] __ratelimit: 32 messages suppressed
May 26 17:04:30 tarm kernel: [  179.941267] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:04:36 tarm kernel: [  185.440989] __ratelimit: 20 messages suppressed
May 26 17:04:36 tarm kernel: [  185.441143] cpufreq-core: target for CPU 0: 1371428 kHz, relation 0
May 26 17:04:41 tarm kernel: [  190.441011] __ratelimit: 39 messages suppressed
May 26 17:04:41 tarm kernel: [  190.441250] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:04:48 tarm kernel: [  197.441033] __ratelimit: 34 messages suppressed
May 26 17:04:48 tarm kernel: [  197.441267] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:04:50 tarm kernel: [  199.940991] __ratelimit: 30 messages suppressed
May 26 17:04:50 tarm kernel: [  199.941150] cpufreq-core: target for CPU 0: 800000 kHz, relation 0
May 26 17:04:57 tarm kernel: [  206.940999] __ratelimit: 32 messages suppressed
May 26 17:04:57 tarm kernel: [  206.941225] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:05:11 tarm kernel: [  220.941020] __ratelimit: 13 messages suppressed
May 26 17:05:11 tarm kernel: [  220.941288] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:05:11 tarm kernel: [  220.941440] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:05:11 tarm kernel: [  220.941581] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:05:17 tarm kernel: [  227.139266] ehci_hcd 0000:00:1d.7: remove, state 4
May 26 17:05:17 tarm kernel: [  227.139483] usb usb2: USB disconnect, address 1
May 26 17:05:17 tarm kernel: [  227.143880] ehci_hcd 0000:00:1d.7: USB bus 2 deregistered
May 26 17:05:17 tarm kernel: [  227.148968] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
May 26 17:05:17 tarm kernel: [  227.148968] uhci_hcd 0000:00:1d.3: remove, state 4
May 26 17:05:17 tarm kernel: [  227.148968] usb usb5: USB disconnect, address 1
May 26 17:05:17 tarm kernel: [  227.149375] uhci_hcd 0000:00:1d.3: USB bus 5 deregistered
May 26 17:05:17 tarm kernel: [  227.149431] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
May 26 17:05:17 tarm kernel: [  227.149448] uhci_hcd 0000:00:1d.2: remove, state 1
May 26 17:05:17 tarm kernel: [  227.149459] usb usb4: USB disconnect, address 1
May 26 17:05:17 tarm kernel: [  227.149464] usb 4-1: USB disconnect, address 2
May 26 17:05:18 tarm kernel: [  227.407102] usb 4-2: USB disconnect, address 3
May 26 17:05:18 tarm kernel: [  227.411886] uhci_hcd 0000:00:1d.2: USB bus 4 deregistered
May 26 17:05:18 tarm kernel: [  227.411955] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
May 26 17:05:18 tarm kernel: [  227.411974] uhci_hcd 0000:00:1d.1: remove, state 1
May 26 17:05:18 tarm kernel: [  227.411986] usb usb3: USB disconnect, address 1
May 26 17:05:18 tarm kernel: [  227.411991] usb 3-1: USB disconnect, address 2
May 26 17:05:18 tarm kernel: [  227.437810] uhci_hcd 0000:00:1d.1: USB bus 3 deregistered
May 26 17:05:18 tarm kernel: [  227.438150] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
May 26 17:05:18 tarm kernel: [  227.438174] uhci_hcd 0000:00:1d.0: remove, state 4
May 26 17:05:18 tarm kernel: [  227.438186] usb usb1: USB disconnect, address 1
May 26 17:05:18 tarm kernel: [  227.438537] uhci_hcd 0000:00:1d.0: USB bus 1 deregistered
May 26 17:05:18 tarm kernel: [  227.438593] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
May 26 17:05:19 tarm kernel: [  228.941023] __ratelimit: 32 messages suppressed
May 26 17:05:19 tarm kernel: [  228.941063] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:05:20 tarm kernel: [  229.941023] __ratelimit: 13 messages suppressed
May 26 17:05:20 tarm kernel: [  229.941251] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:05:22 tarm kernel: [  231.076114] PM: Syncing filesystems ... done.
May 26 17:05:36 tarm kernel: [  231.371787] Freezing user space processes ... (elapsed 0.00 seconds) done.
May 26 17:05:36 tarm kernel: [  231.380672] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
May 26 17:05:36 tarm kernel: [  231.380822] Suspending console(s)
May 26 17:05:36 tarm kernel: [  231.588170] sd 0:0:0:0: [sda] Synchronizing SCSI cache
May 26 17:05:36 tarm kernel: [  231.597293] sd 0:0:0:0: [sda] Stopping disk
May 26 17:05:36 tarm kernel: [  233.021763] nsc-ircc 00:09: disabled
May 26 17:05:36 tarm kernel: [  233.021953] eth1: Going into suspend...
May 26 17:05:36 tarm kernel: [  233.025023] ACPI: PCI interrupt for device 0000:14:02.0 disabled
May 26 17:05:36 tarm kernel: [  233.025034] ACPI handle has no context!
May 26 17:05:36 tarm kernel: [  233.042094] ACPI handle has no context!
May 26 17:05:36 tarm kernel: [  233.042124] ACPI: PCI interrupt for device 0000:14:00.2 disabled
May 26 17:05:36 tarm kernel: [  233.042134] ACPI handle has no context!
May 26 17:05:36 tarm kernel: [  233.062075] ACPI handle has no context!
May 26 17:05:36 tarm kernel: [  233.218607] ACPI handle has no context!
May 26 17:05:36 tarm kernel: [  233.437051] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
May 26 17:05:36 tarm kernel: [  233.456153] ACPI: Preparing to enter system sleep state S3
May 26 17:05:36 tarm kernel: [  233.469518] Extended CMOS year: 2000
May 26 17:05:36 tarm kernel: [  233.469518] Intel machine check architecture supported.
May 26 17:05:36 tarm kernel: [  233.469534] Intel machine check reporting enabled on CPU#0.
May 26 17:05:36 tarm kernel: [  233.469634] Back to C!
May 26 17:05:36 tarm kernel: [  233.469930] Extended CMOS year: 2000
May 26 17:05:36 tarm kernel: [  233.469935] Force enabled HPET at resume
May 26 17:05:36 tarm kernel: [  233.470111] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 17:05:36 tarm kernel: [  233.470113] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:05:36 tarm kernel: [  233.470116] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:05:36 tarm kernel: [  233.470119] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:05:36 tarm kernel: [  233.470123] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:05:36 tarm kernel: [  233.470125] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:05:36 tarm kernel: [  233.470128] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:05:36 tarm kernel: [  233.470131] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
May 26 17:05:36 tarm kernel: [  233.470133] cpufreq-core: governor: change or update limits
May 26 17:05:36 tarm kernel: [  233.470136] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 17:05:36 tarm kernel: [  233.534939] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 20002020, writing 2020)
May 26 17:05:36 tarm kernel: [  233.534945] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100107, writing 100507)
May 26 17:05:36 tarm kernel: [  233.534962] PCI: Setting latency timer of device 0000:00:01.0 to 64
May 26 17:05:36 tarm kernel: [  233.549015] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
May 26 17:05:36 tarm kernel: [  233.549038] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:05:36 tarm kernel: [  233.549045] PCI: Setting latency timer of device 0000:00:1b.0 to 64
May 26 17:05:36 tarm kernel: [  233.605163] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was f0, writing 200000f0)
May 26 17:05:36 tarm kernel: [  233.605184] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
May 26 17:05:36 tarm kernel: [  233.605249] PCI: Setting latency timer of device 0000:00:1c.0 to 64
May 26 17:05:36 tarm kernel: [  233.605310] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
May 26 17:05:36 tarm kernel: [  233.605373] PCI: Setting latency timer of device 0000:00:1c.1 to 64
May 26 17:05:36 tarm kernel: [  233.605433] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
May 26 17:05:36 tarm kernel: [  233.605496] PCI: Setting latency timer of device 0000:00:1c.2 to 64
May 26 17:05:36 tarm kernel: [  233.605557] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507)
May 26 17:05:36 tarm kernel: [  233.605620] PCI: Setting latency timer of device 0000:00:1c.3 to 64
May 26 17:05:36 tarm kernel: [  233.605627] PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10b)
May 26 17:05:36 tarm kernel: [  233.605681] PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b)
May 26 17:05:36 tarm kernel: [  233.605728] PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30b)
May 26 17:05:36 tarm kernel: [  233.605773] PM: Writing back config space on device 0000:00:1d.3 at offset f (was 400, writing 40b)
May 26 17:05:36 tarm kernel: [  233.605834] PM: Writing back config space on device 0000:00:1d.7 at offset f (was 400, writing 40b)
May 26 17:05:36 tarm kernel: [  233.605871] PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing b0004000)
May 26 17:05:36 tarm kernel: [  233.605879] PM: Writing back config space on device 0000:00:1d.7 at offset 1 (was 2900000, writing 2900102)
May 26 17:05:36 tarm kernel: [  233.605978] PCI: Setting latency timer of device 0000:00:1e.0 to 64
May 26 17:05:36 tarm kernel: [  233.621044] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00005, writing 2b80005)
May 26 17:05:36 tarm kernel: [  233.621063] PCI: Setting latency timer of device 0000:00:1f.2 to 64
May 26 17:05:36 tarm kernel: [  233.623314] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:05:36 tarm kernel: [  233.623320] PCI: Setting latency timer of device 0000:01:00.0 to 64
May 26 17:05:36 tarm kernel: [  233.623357] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing f4f70000)
May 26 17:05:36 tarm kernel: [  233.623383] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 100106)
May 26 17:05:36 tarm kernel: [  233.961256] PM: Writing back config space on device 0000:14:00.1 at offset 4 (was 0, writing c0001000)
May 26 17:05:36 tarm kernel: [  233.961263] PM: Writing back config space on device 0000:14:00.1 at offset 3 (was 800000, writing 804000)
May 26 17:05:36 tarm kernel: [  233.961271] PM: Writing back config space on device 0000:14:00.1 at offset 1 (was 2100000, writing 2100106)
May 26 17:05:36 tarm kernel: [  233.973825] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
May 26 17:05:36 tarm kernel: [  233.973827] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
May 26 17:05:36 tarm kernel: [  233.981830] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 succeeded
May 26 17:05:36 tarm kernel: [  233.989833] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 succeeded
May 26 17:05:36 tarm kernel: [  234.014161] ata2.00: configured for UDMA/33
May 26 17:05:36 tarm kernel: [  234.016178] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[c0001000-c00017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
May 26 17:05:36 tarm kernel: [  234.041185] PM: Writing back config space on device 0000:14:00.2 at offset 4 (was 0, writing c0001800)
May 26 17:05:36 tarm kernel: [  234.041190] PM: Writing back config space on device 0000:14:00.2 at offset 3 (was 800000, writing 804000)
May 26 17:05:36 tarm kernel: [  234.041197] PM: Writing back config space on device 0000:14:00.2 at offset 1 (was 2100000, writing 2100106)
May 26 17:05:36 tarm kernel: [  234.041217] ACPI: PCI Interrupt 0000:14:00.2[C] -> GSI 18 (level, low) -> IRQ 18
May 26 17:05:36 tarm kernel: [  234.042261] eth1: Coming out of suspend...
May 26 17:05:36 tarm kernel: [  234.064110] ACPI: PCI Interrupt 0000:14:02.0[A] -> GSI 21 (level, low) -> IRQ 21
May 26 17:05:36 tarm kernel: [  234.064849] nsc-ircc 00:09: activated
May 26 17:05:36 tarm kernel: [  234.941019] __ratelimit: 37 messages suppressed
May 26 17:05:36 tarm kernel: [  234.941022] cpufreq-core: target for CPU 0: 800000 kHz, relation 0
May 26 17:05:36 tarm kernel: [  235.000506] sd 0:0:0:0: [sda] Starting disk
May 26 17:05:36 tarm kernel: [  235.401717] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
May 26 17:05:36 tarm kernel: [  235.401725] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
May 26 17:05:36 tarm kernel: [  235.401731] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
May 26 17:05:36 tarm kernel: [  235.401738] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
May 26 17:05:36 tarm kernel: [  235.402138] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
May 26 17:05:36 tarm kernel: [  235.425653] ata1.00: configured for UDMA/100
May 26 17:05:36 tarm kernel: [  235.449674] ata1.00: configured for UDMA/100
May 26 17:05:36 tarm kernel: [  235.449681] ata1: EH complete
May 26 17:05:36 tarm kernel: [  235.449773] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
May 26 17:05:36 tarm kernel: [  235.449816] sd 0:0:0:0: [sda] Write Protect is off
May 26 17:05:36 tarm kernel: [  235.449822] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 26 17:05:36 tarm kernel: [  235.449895] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 26 17:05:36 tarm kernel: [  235.449967] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
May 26 17:05:36 tarm kernel: [  235.450006] sd 0:0:0:0: [sda] Write Protect is off
May 26 17:05:36 tarm kernel: [  235.450012] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 26 17:05:36 tarm kernel: [  235.450083] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 26 17:05:36 tarm kernel: [  238.171920] hdaps: initial latch check good (0x01).
May 26 17:05:36 tarm kernel: [  238.377549] Restarting tasks ... done.
May 26 17:05:36 tarm kernel: [  238.545699] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
May 26 17:05:36 tarm kernel: [  238.545980] PCI: Setting latency timer of device 0000:00:1d.7 to 64
May 26 17:05:36 tarm kernel: [  238.546130] ehci_hcd 0000:00:1d.7: EHCI Host Controller
May 26 17:05:36 tarm kernel: [  238.607604] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
May 26 17:05:36 tarm kernel: [  238.614007] ehci_hcd 0000:00:1d.7: debug port 1
May 26 17:05:36 tarm kernel: [  238.614139] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
May 26 17:05:36 tarm kernel: [  238.614296] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb0004000
May 26 17:05:36 tarm kernel: [  238.630093] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
May 26 17:05:36 tarm kernel: [  238.630554] usb usb1: configuration #1 chosen from 1 choice
May 26 17:05:36 tarm kernel: [  238.630625] hub 1-0:1.0: USB hub found
May 26 17:05:36 tarm kernel: [  238.630641] hub 1-0:1.0: 8 ports detected
May 26 17:05:36 tarm kernel: [  238.733155] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
May 26 17:05:36 tarm kernel: [  238.733167] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:05:36 tarm kernel: [  238.733174] usb usb1: Product: EHCI Host Controller
May 26 17:05:36 tarm kernel: [  238.733180] usb usb1: Manufacturer: Linux 2.6.26-rc3 ehci_hcd
May 26 17:05:36 tarm kernel: [  238.733185] usb usb1: SerialNumber: 0000:00:1d.7
May 26 17:05:36 tarm kernel: [  238.754490] USB Universal Host Controller Interface driver v3.0
May 26 17:05:36 tarm kernel: [  238.754576] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:05:36 tarm kernel: [  238.754597] PCI: Setting latency timer of device 0000:00:1d.0 to 64
May 26 17:05:36 tarm kernel: [  238.754605] uhci_hcd 0000:00:1d.0: UHCI Host Controller
May 26 17:05:36 tarm kernel: [  238.754668] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
May 26 17:05:36 tarm kernel: [  238.754706] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
May 26 17:05:36 tarm kernel: [  238.754943] usb usb2: configuration #1 chosen from 1 choice
May 26 17:05:36 tarm kernel: [  238.755010] hub 2-0:1.0: USB hub found
May 26 17:05:36 tarm kernel: [  238.755025] hub 2-0:1.0: 2 ports detected
May 26 17:05:36 tarm kernel: [  238.857152] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:05:36 tarm kernel: [  238.857394] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:05:36 tarm kernel: [  238.857526] usb usb2: Product: UHCI Host Controller
May 26 17:05:36 tarm kernel: [  238.857646] usb usb2: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:05:36 tarm kernel: [  238.857766] usb usb2: SerialNumber: 0000:00:1d.0
May 26 17:05:36 tarm kernel: [  238.857922] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
May 26 17:05:36 tarm kernel: [  238.858108] PCI: Setting latency timer of device 0000:00:1d.1 to 64
May 26 17:05:36 tarm kernel: [  238.858254] uhci_hcd 0000:00:1d.1: UHCI Host Controller
May 26 17:05:36 tarm kernel: [  238.858424] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
May 26 17:05:36 tarm kernel: [  238.858584] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
May 26 17:05:36 tarm kernel: [  238.858923] usb usb3: configuration #1 chosen from 1 choice
May 26 17:05:36 tarm kernel: [  238.859114] hub 3-0:1.0: USB hub found
May 26 17:05:36 tarm kernel: [  238.859244] hub 3-0:1.0: 2 ports detected
May 26 17:05:36 tarm kernel: [  238.951941] hub 1-0:1.0: unable to enumerate USB device on port 3
May 26 17:05:36 tarm kernel: [  238.961069] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:05:36 tarm kernel: [  238.961075] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:05:36 tarm kernel: [  238.961078] usb usb3: Product: UHCI Host Controller
May 26 17:05:36 tarm kernel: [  238.961080] usb usb3: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:05:36 tarm kernel: [  238.961083] usb usb3: SerialNumber: 0000:00:1d.1
May 26 17:05:36 tarm kernel: [  238.961115] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
May 26 17:05:36 tarm kernel: [  238.961126] PCI: Setting latency timer of device 0000:00:1d.2 to 64
May 26 17:05:36 tarm kernel: [  238.961130] uhci_hcd 0000:00:1d.2: UHCI Host Controller
May 26 17:05:36 tarm kernel: [  238.961155] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
May 26 17:05:36 tarm kernel: [  238.961181] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
May 26 17:05:36 tarm kernel: [  238.961283] usb usb4: configuration #1 chosen from 1 choice
May 26 17:05:36 tarm kernel: [  238.961311] hub 4-0:1.0: USB hub found
May 26 17:05:36 tarm kernel: [  238.961317] hub 4-0:1.0: 2 ports detected
May 26 17:05:36 tarm kernel: [  239.065077] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:05:36 tarm kernel: [  239.065084] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:05:36 tarm kernel: [  239.065087] usb usb4: Product: UHCI Host Controller
May 26 17:05:36 tarm kernel: [  239.065089] usb usb4: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:05:36 tarm kernel: [  239.065091] usb usb4: SerialNumber: 0000:00:1d.2
May 26 17:05:36 tarm kernel: [  239.065124] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
May 26 17:05:36 tarm kernel: [  239.065137] PCI: Setting latency timer of device 0000:00:1d.3 to 64
May 26 17:05:36 tarm kernel: [  239.065141] uhci_hcd 0000:00:1d.3: UHCI Host Controller
May 26 17:05:36 tarm kernel: [  239.065165] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
May 26 17:05:36 tarm kernel: [  239.065192] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
May 26 17:05:36 tarm kernel: [  239.065300] usb usb5: configuration #1 chosen from 1 choice
May 26 17:05:36 tarm kernel: [  239.065328] hub 5-0:1.0: USB hub found
May 26 17:05:36 tarm kernel: [  239.065335] hub 5-0:1.0: 2 ports detected
May 26 17:05:36 tarm kernel: [  239.172508] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:05:36 tarm kernel: [  239.172653] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:05:36 tarm kernel: [  239.172711] usb usb5: Product: UHCI Host Controller
May 26 17:05:36 tarm kernel: [  239.172764] usb usb5: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:05:36 tarm kernel: [  239.172817] usb usb5: SerialNumber: 0000:00:1d.3
May 26 17:05:36 tarm kernel: [  239.189150] hub 1-0:1.0: unable to enumerate USB device on port 5
May 26 17:05:36 tarm kernel: [  239.223775] [drm] Loading R300 Microcode
May 26 17:05:37 tarm kernel: [  239.429247] hub 1-0:1.0: unable to enumerate USB device on port 6
May 26 17:05:37 tarm kernel: [  239.669302] usb 3-1: new low speed USB device using uhci_hcd and address 2
May 26 17:05:37 tarm kernel: [  239.849560] usb 3-1: configuration #1 chosen from 1 choice
May 26 17:05:37 tarm kernel: [  239.876525] input: Logitech Trackball as /class/input/input12
May 26 17:05:37 tarm kernel: [  239.903251] input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.1-1
May 26 17:05:37 tarm kernel: [  239.903507] usb 3-1: New USB device found, idVendor=046d, idProduct=c404
May 26 17:05:37 tarm kernel: [  239.903561] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:05:37 tarm kernel: [  239.903611] usb 3-1: Product: Trackball
May 26 17:05:37 tarm kernel: [  239.903657] usb 3-1: Manufacturer: Logitech
May 26 17:05:38 tarm kernel: [  240.140989] usb 4-1: new full speed USB device using uhci_hcd and address 2
May 26 17:05:38 tarm kernel: [  240.316315] usb 4-1: configuration #1 chosen from 1 choice
May 26 17:05:38 tarm kernel: [  240.326782] usb 4-1: New USB device found, idVendor=0a5c, idProduct=2110
May 26 17:05:38 tarm kernel: [  240.326943] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:05:38 tarm kernel: [  240.327302] usb 4-1: Product: BCM2045B
May 26 17:05:38 tarm kernel: [  240.327356] usb 4-1: Manufacturer: Broadcom Corp
May 26 17:05:38 tarm kernel: [  240.569038] usb 4-2: new full speed USB device using uhci_hcd and address 3
May 26 17:05:38 tarm kernel: [  240.584721] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
May 26 17:05:38 tarm kernel: [  240.592342] pan1: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
May 26 17:05:38 tarm kernel: [  240.738539] usb 4-2: configuration #1 chosen from 1 choice
May 26 17:05:38 tarm kernel: [  240.745401] usb 4-2: New USB device found, idVendor=0483, idProduct=2016
May 26 17:05:38 tarm kernel: [  240.745493] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:05:38 tarm kernel: [  240.745548] usb 4-2: Product: Biometric Coprocessor
May 26 17:05:38 tarm kernel: [  240.745598] usb 4-2: Manufacturer: STMicroelectronics
May 26 17:05:40 tarm kernel: [  241.940987] __ratelimit: 13 messages suppressed
May 26 17:05:40 tarm kernel: [  241.941181] cpufreq-core: target for CPU 0: 228571 kHz, relation 0
May 26 17:05:41 tarm kernel: [  243.097399] ADDRCONF(NETDEV_UP): eth0: link is not ready
May 26 17:05:43 tarm kernel: [  244.941023] __ratelimit: 27 messages suppressed
May 26 17:05:43 tarm kernel: [  244.941244] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:05:46 tarm kernel: [  248.929927] ADDRCONF(NETDEV_UP): eth1: link is not ready
May 26 17:05:47 tarm kernel: [  249.562683] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
May 26 17:05:48 tarm kernel: [  249.940991] __ratelimit: 34 messages suppressed
May 26 17:05:48 tarm kernel: [  249.940997] cpufreq-core: target for CPU 0: 171428 kHz, relation 0
May 26 17:05:50 tarm kernel: [  251.961251] tun0: Disabled Privacy Extensions
May 26 17:05:58 tarm kernel: [  260.364983] eth1: no IPv6 routers present
May 26 17:06:09 tarm kernel: [  270.941020] __ratelimit: 34 messages suppressed
May 26 17:06:09 tarm kernel: [  270.941039] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:06:09 tarm kernel: [  270.941048] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:06:09 tarm kernel: [  270.941056] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:06:09 tarm kernel: [  270.941064] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:06:09 tarm kernel: [  271.365829] ehci_hcd 0000:00:1d.7: remove, state 4
May 26 17:06:09 tarm kernel: [  271.365843] usb usb1: USB disconnect, address 1
May 26 17:06:09 tarm kernel: [  271.384968] ehci_hcd 0000:00:1d.7: USB bus 1 deregistered
May 26 17:06:09 tarm kernel: [  271.384968] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
May 26 17:06:09 tarm kernel: [  271.385508] uhci_hcd 0000:00:1d.3: remove, state 4
May 26 17:06:09 tarm kernel: [  271.385519] usb usb5: USB disconnect, address 1
May 26 17:06:09 tarm kernel: [  271.385711] uhci_hcd 0000:00:1d.3: USB bus 5 deregistered
May 26 17:06:09 tarm kernel: [  271.385739] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
May 26 17:06:09 tarm kernel: [  271.385749] uhci_hcd 0000:00:1d.2: remove, state 1
May 26 17:06:09 tarm kernel: [  271.385756] usb usb4: USB disconnect, address 1
May 26 17:06:09 tarm kernel: [  271.385758] usb 4-1: USB disconnect, address 2
May 26 17:06:09 tarm kernel: [  271.646074] usb 4-2: USB disconnect, address 3
May 26 17:06:09 tarm kernel: [  271.648464] uhci_hcd 0000:00:1d.2: USB bus 4 deregistered
May 26 17:06:09 tarm kernel: [  271.648500] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
May 26 17:06:09 tarm kernel: [  271.648511] uhci_hcd 0000:00:1d.1: remove, state 1
May 26 17:06:09 tarm kernel: [  271.648517] usb usb3: USB disconnect, address 1
May 26 17:06:09 tarm kernel: [  271.648519] usb 3-1: USB disconnect, address 2
May 26 17:06:09 tarm kernel: [  271.673669] uhci_hcd 0000:00:1d.1: USB bus 3 deregistered
May 26 17:06:09 tarm kernel: [  271.673858] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
May 26 17:06:09 tarm kernel: [  271.673871] uhci_hcd 0000:00:1d.0: remove, state 4
May 26 17:06:09 tarm kernel: [  271.673878] usb usb2: USB disconnect, address 1
May 26 17:06:09 tarm kernel: [  271.674048] uhci_hcd 0000:00:1d.0: USB bus 2 deregistered
May 26 17:06:09 tarm kernel: [  271.674075] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
May 26 17:06:11 tarm kernel: [  273.462926] PM: Syncing filesystems ... done.
May 26 17:06:23 tarm kernel: [  273.690876] Freezing user space processes ... (elapsed 0.00 seconds) done.
May 26 17:06:23 tarm kernel: [  273.692274] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
May 26 17:06:23 tarm kernel: [  273.692353] Suspending console(s)
May 26 17:06:23 tarm kernel: [  273.905802] sd 0:0:0:0: [sda] Synchronizing SCSI cache
May 26 17:06:23 tarm kernel: [  273.914797] sd 0:0:0:0: [sda] Stopping disk
May 26 17:06:23 tarm kernel: [  275.349748] nsc-ircc 00:09: disabled
May 26 17:06:23 tarm kernel: [  275.349937] eth1: Going into suspend...
May 26 17:06:23 tarm kernel: [  275.354784] ACPI: PCI interrupt for device 0000:14:02.0 disabled
May 26 17:06:23 tarm kernel: [  275.354795] ACPI handle has no context!
May 26 17:06:23 tarm kernel: [  275.370131] ACPI handle has no context!
May 26 17:06:23 tarm kernel: [  275.370160] ACPI: PCI interrupt for device 0000:14:00.2 disabled
May 26 17:06:23 tarm kernel: [  275.370170] ACPI handle has no context!
May 26 17:06:23 tarm kernel: [  275.390076] ACPI handle has no context!
May 26 17:06:23 tarm kernel: [  275.546630] ACPI handle has no context!
May 26 17:06:23 tarm kernel: [  275.765051] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
May 26 17:06:23 tarm kernel: [  275.784291] ACPI: Preparing to enter system sleep state S3
May 26 17:06:23 tarm kernel: [  275.796812] Extended CMOS year: 2000
May 26 17:06:23 tarm kernel: [  275.796904] __ratelimit: 24 messages suppressed
May 26 17:06:23 tarm kernel: [  275.796909] cpufreq-core: suspending cpu 0
May 26 17:06:23 tarm kernel: [  275.796909] Intel machine check architecture supported.
May 26 17:06:23 tarm kernel: [  275.796925] Intel machine check reporting enabled on CPU#0.
May 26 17:06:23 tarm kernel: [  275.796967] Back to C!
May 26 17:06:23 tarm kernel: [  275.796967] Extended CMOS year: 2000
May 26 17:06:23 tarm kernel: [  275.796967] Force enabled HPET at resume
May 26 17:06:23 tarm kernel: [  275.796967] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 17:06:23 tarm kernel: [  275.796967] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:06:23 tarm kernel: [  275.796967] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:06:23 tarm kernel: [  275.796967] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:06:23 tarm kernel: [  275.796983] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:06:23 tarm kernel: [  275.796986] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:06:23 tarm kernel: [  275.796989] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:06:23 tarm kernel: [  275.796992] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
May 26 17:06:23 tarm kernel: [  275.796994] cpufreq-core: governor: change or update limits
May 26 17:06:23 tarm kernel: [  275.796996] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 17:06:23 tarm kernel: [  275.857830] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100107, writing 100507)
May 26 17:06:23 tarm kernel: [  275.857830] PCI: Setting latency timer of device 0000:00:01.0 to 64
May 26 17:06:23 tarm kernel: [  275.877052] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
May 26 17:06:23 tarm kernel: [  275.877076] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:06:23 tarm kernel: [  275.877082] PCI: Setting latency timer of device 0000:00:1b.0 to 64
May 26 17:06:23 tarm kernel: [  275.933171] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
May 26 17:06:23 tarm kernel: [  275.933245] PCI: Setting latency timer of device 0000:00:1c.0 to 64
May 26 17:06:23 tarm kernel: [  275.933296] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
May 26 17:06:23 tarm kernel: [  275.933368] PCI: Setting latency timer of device 0000:00:1c.1 to 64
May 26 17:06:23 tarm kernel: [  275.933420] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
May 26 17:06:23 tarm kernel: [  275.933483] PCI: Setting latency timer of device 0000:00:1c.2 to 64
May 26 17:06:23 tarm kernel: [  275.933544] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507)
May 26 17:06:23 tarm kernel: [  275.933607] PCI: Setting latency timer of device 0000:00:1c.3 to 64
May 26 17:06:23 tarm kernel: [  275.933623] PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10b)
May 26 17:06:23 tarm kernel: [  275.933669] PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b)
May 26 17:06:23 tarm kernel: [  275.933723] PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30b)
May 26 17:06:23 tarm kernel: [  275.933769] PM: Writing back config space on device 0000:00:1d.3 at offset f (was 400, writing 40b)
May 26 17:06:23 tarm kernel: [  275.933830] PM: Writing back config space on device 0000:00:1d.7 at offset f (was 400, writing 40b)
May 26 17:06:23 tarm kernel: [  275.933858] PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing b0004000)
May 26 17:06:23 tarm kernel: [  275.933875] PM: Writing back config space on device 0000:00:1d.7 at offset 1 (was 2900000, writing 2900102)
May 26 17:06:23 tarm kernel: [  275.933976] PCI: Setting latency timer of device 0000:00:1e.0 to 64
May 26 17:06:23 tarm kernel: [  275.949064] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00005, writing 2b80005)
May 26 17:06:23 tarm kernel: [  275.949089] PCI: Setting latency timer of device 0000:00:1f.2 to 64
May 26 17:06:23 tarm kernel: [  275.952615] PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100103, writing 100107)
May 26 17:06:23 tarm kernel: [  275.952725] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:06:23 tarm kernel: [  275.952732] PCI: Setting latency timer of device 0000:01:00.0 to 64
May 26 17:06:23 tarm kernel: [  275.952775] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing fcf70000)
May 26 17:06:23 tarm kernel: [  275.952805] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 100106)
May 26 17:06:23 tarm kernel: [  276.289270] PM: Writing back config space on device 0000:14:00.1 at offset 4 (was 0, writing c0001000)
May 26 17:06:23 tarm kernel: [  276.289280] PM: Writing back config space on device 0000:14:00.1 at offset 3 (was 800000, writing 804000)
May 26 17:06:23 tarm kernel: [  276.289291] PM: Writing back config space on device 0000:14:00.1 at offset 1 (was 2100000, writing 2100106)
May 26 17:06:23 tarm kernel: [  276.301847] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
May 26 17:06:23 tarm kernel: [  276.301852] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
May 26 17:06:23 tarm kernel: [  276.309858] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 succeeded
May 26 17:06:23 tarm kernel: [  276.317863] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 succeeded
May 26 17:06:23 tarm kernel: [  276.342258] ata2.00: configured for UDMA/33
May 26 17:06:23 tarm kernel: [  276.344286] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[c0001000-c00017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
May 26 17:06:23 tarm kernel: [  276.369295] PM: Writing back config space on device 0000:14:00.2 at offset 4 (was 0, writing c0001800)
May 26 17:06:23 tarm kernel: [  276.369303] PM: Writing back config space on device 0000:14:00.2 at offset 3 (was 800000, writing 804000)
May 26 17:06:23 tarm kernel: [  276.369313] PM: Writing back config space on device 0000:14:00.2 at offset 1 (was 2100000, writing 2100106)
May 26 17:06:23 tarm kernel: [  276.369337] ACPI: PCI Interrupt 0000:14:00.2[C] -> GSI 18 (level, low) -> IRQ 18
May 26 17:06:23 tarm kernel: [  276.370387] eth1: Coming out of suspend...
May 26 17:06:23 tarm kernel: [  276.392223] ACPI: PCI Interrupt 0000:14:02.0[A] -> GSI 21 (level, low) -> IRQ 21
May 26 17:06:23 tarm kernel: [  276.394194] nsc-ircc 00:09: activated
May 26 17:06:23 tarm kernel: [  277.338077] sd 0:0:0:0: [sda] Starting disk
May 26 17:06:23 tarm kernel: [  277.385689] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
May 26 17:06:23 tarm kernel: [  277.385692] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
May 26 17:06:23 tarm kernel: [  277.385696] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
May 26 17:06:23 tarm kernel: [  277.385699] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
May 26 17:06:23 tarm kernel: [  277.386116] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
May 26 17:06:23 tarm kernel: [  277.409617] ata1.00: configured for UDMA/100
May 26 17:06:23 tarm kernel: [  277.433629] ata1.00: configured for UDMA/100
May 26 17:06:23 tarm kernel: [  277.433633] ata1: EH complete
May 26 17:06:23 tarm kernel: [  277.433692] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
May 26 17:06:23 tarm kernel: [  277.433716] sd 0:0:0:0: [sda] Write Protect is off
May 26 17:06:23 tarm kernel: [  277.433719] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 26 17:06:23 tarm kernel: [  277.433761] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 26 17:06:23 tarm kernel: [  277.433802] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
May 26 17:06:23 tarm kernel: [  277.433825] sd 0:0:0:0: [sda] Write Protect is off
May 26 17:06:23 tarm kernel: [  277.433827] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 26 17:06:23 tarm kernel: [  277.433868] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 26 17:06:23 tarm kernel: [  280.139770] hdaps: initial latch check good (0x01).
May 26 17:06:23 tarm kernel: [  280.549499] Restarting tasks ... done.
May 26 17:06:23 tarm kernel: [  280.658346] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
May 26 17:06:23 tarm kernel: [  280.658607] PCI: Setting latency timer of device 0000:00:1d.7 to 64
May 26 17:06:23 tarm kernel: [  280.658749] ehci_hcd 0000:00:1d.7: EHCI Host Controller
May 26 17:06:23 tarm kernel: [  280.704830] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
May 26 17:06:23 tarm kernel: [  280.708957] ehci_hcd 0000:00:1d.7: debug port 1
May 26 17:06:23 tarm kernel: [  280.709163] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
May 26 17:06:23 tarm kernel: [  280.709320] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb0004000
May 26 17:06:23 tarm kernel: [  280.725037] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
May 26 17:06:23 tarm kernel: [  280.725461] usb usb1: configuration #1 chosen from 1 choice
May 26 17:06:23 tarm kernel: [  280.726082] hub 1-0:1.0: USB hub found
May 26 17:06:23 tarm kernel: [  280.726103] hub 1-0:1.0: 8 ports detected
May 26 17:06:23 tarm kernel: [  280.829127] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
May 26 17:06:23 tarm kernel: [  280.829140] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:06:23 tarm kernel: [  280.829147] usb usb1: Product: EHCI Host Controller
May 26 17:06:23 tarm kernel: [  280.829152] usb usb1: Manufacturer: Linux 2.6.26-rc3 ehci_hcd
May 26 17:06:23 tarm kernel: [  280.829158] usb usb1: SerialNumber: 0000:00:1d.7
May 26 17:06:23 tarm kernel: [  280.843749] USB Universal Host Controller Interface driver v3.0
May 26 17:06:23 tarm kernel: [  280.843843] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:06:23 tarm kernel: [  280.843864] PCI: Setting latency timer of device 0000:00:1d.0 to 64
May 26 17:06:23 tarm kernel: [  280.843872] uhci_hcd 0000:00:1d.0: UHCI Host Controller
May 26 17:06:23 tarm kernel: [  280.843935] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
May 26 17:06:23 tarm kernel: [  280.843972] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
May 26 17:06:23 tarm kernel: [  280.844210] usb usb2: configuration #1 chosen from 1 choice
May 26 17:06:23 tarm kernel: [  280.844276] hub 2-0:1.0: USB hub found
May 26 17:06:23 tarm kernel: [  280.844290] hub 2-0:1.0: 2 ports detected
May 26 17:06:24 tarm kernel: [  280.941077] __ratelimit: 45 messages suppressed
May 26 17:06:24 tarm kernel: [  280.941274] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:06:24 tarm kernel: [  280.945074] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:06:24 tarm kernel: [  280.945079] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:06:24 tarm kernel: [  280.945082] usb usb2: Product: UHCI Host Controller
May 26 17:06:24 tarm kernel: [  280.945084] usb usb2: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:06:24 tarm kernel: [  280.945086] usb usb2: SerialNumber: 0000:00:1d.0
May 26 17:06:24 tarm kernel: [  280.945116] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
May 26 17:06:24 tarm kernel: [  280.945128] PCI: Setting latency timer of device 0000:00:1d.1 to 64
May 26 17:06:24 tarm kernel: [  280.945132] uhci_hcd 0000:00:1d.1: UHCI Host Controller
May 26 17:06:24 tarm kernel: [  280.945157] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
May 26 17:06:24 tarm kernel: [  280.945183] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
May 26 17:06:24 tarm kernel: [  280.945289] usb usb3: configuration #1 chosen from 1 choice
May 26 17:06:24 tarm kernel: [  280.945319] hub 3-0:1.0: USB hub found
May 26 17:06:24 tarm kernel: [  280.945325] hub 3-0:1.0: 2 ports detected
May 26 17:06:24 tarm kernel: [  281.030288] hub 1-0:1.0: unable to enumerate USB device on port 3
May 26 17:06:24 tarm kernel: [  281.049081] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:06:24 tarm kernel: [  281.050181] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:06:24 tarm kernel: [  281.050261] usb usb3: Product: UHCI Host Controller
May 26 17:06:24 tarm kernel: [  281.050314] usb usb3: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:06:24 tarm kernel: [  281.050366] usb usb3: SerialNumber: 0000:00:1d.1
May 26 17:06:24 tarm kernel: [  281.050448] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
May 26 17:06:24 tarm kernel: [  281.050533] PCI: Setting latency timer of device 0000:00:1d.2 to 64
May 26 17:06:24 tarm kernel: [  281.050598] uhci_hcd 0000:00:1d.2: UHCI Host Controller
May 26 17:06:24 tarm kernel: [  281.050677] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
May 26 17:06:24 tarm kernel: [  281.050756] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
May 26 17:06:24 tarm kernel: [  281.050917] usb usb4: configuration #1 chosen from 1 choice
May 26 17:06:24 tarm kernel: [  281.051000] hub 4-0:1.0: USB hub found
May 26 17:06:24 tarm kernel: [  281.051057] hub 4-0:1.0: 2 ports detected
May 26 17:06:24 tarm kernel: [  281.153093] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:06:24 tarm kernel: [  281.154270] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:06:24 tarm kernel: [  281.154351] usb usb4: Product: UHCI Host Controller
May 26 17:06:24 tarm kernel: [  281.154404] usb usb4: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:06:24 tarm kernel: [  281.154456] usb usb4: SerialNumber: 0000:00:1d.2
May 26 17:06:24 tarm kernel: [  281.154541] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
May 26 17:06:24 tarm kernel: [  281.154626] PCI: Setting latency timer of device 0000:00:1d.3 to 64
May 26 17:06:24 tarm kernel: [  281.154690] uhci_hcd 0000:00:1d.3: UHCI Host Controller
May 26 17:06:24 tarm kernel: [  281.154772] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
May 26 17:06:24 tarm kernel: [  281.154851] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
May 26 17:06:24 tarm kernel: [  281.155013] usb usb5: configuration #1 chosen from 1 choice
May 26 17:06:24 tarm kernel: [  281.155096] hub 5-0:1.0: USB hub found
May 26 17:06:24 tarm kernel: [  281.155153] hub 5-0:1.0: 2 ports detected
May 26 17:06:24 tarm kernel: [  281.257066] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:06:24 tarm kernel: [  281.258029] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:06:24 tarm kernel: [  281.258106] usb usb5: Product: UHCI Host Controller
May 26 17:06:24 tarm kernel: [  281.258159] usb usb5: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:06:24 tarm kernel: [  281.258210] usb usb5: SerialNumber: 0000:00:1d.3
May 26 17:06:24 tarm kernel: [  281.273474] hub 1-0:1.0: unable to enumerate USB device on port 5
May 26 17:06:24 tarm kernel: [  281.379226] [drm] Loading R300 Microcode
May 26 17:06:24 tarm kernel: [  281.513044] hub 1-0:1.0: unable to enumerate USB device on port 6
May 26 17:06:24 tarm kernel: [  281.757204] usb 3-1: new low speed USB device using uhci_hcd and address 2
May 26 17:06:24 tarm kernel: [  281.936966] usb 3-1: configuration #1 chosen from 1 choice
May 26 17:06:24 tarm kernel: [  281.965684] input: Logitech Trackball as /class/input/input13
May 26 17:06:24 tarm kernel: [  281.993174] input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.1-1
May 26 17:06:24 tarm kernel: [  281.993454] usb 3-1: New USB device found, idVendor=046d, idProduct=c404
May 26 17:06:24 tarm kernel: [  281.993531] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:06:24 tarm kernel: [  281.993602] usb 3-1: Product: Trackball
May 26 17:06:24 tarm kernel: [  281.993668] usb 3-1: Manufacturer: Logitech
May 26 17:06:24 tarm kernel: [  282.237073] usb 4-1: new full speed USB device using uhci_hcd and address 2
May 26 17:06:24 tarm kernel: [  282.417060] usb 4-1: configuration #1 chosen from 1 choice
May 26 17:06:24 tarm kernel: [  282.423275] usb 4-1: New USB device found, idVendor=0a5c, idProduct=2110
May 26 17:06:24 tarm kernel: [  282.423361] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:06:24 tarm kernel: [  282.423430] usb 4-1: Product: BCM2045B
May 26 17:06:24 tarm kernel: [  282.423494] usb 4-1: Manufacturer: Broadcom Corp
May 26 17:06:25 tarm kernel: [  282.759606] usb 4-2: new full speed USB device using uhci_hcd and address 3
May 26 17:06:25 tarm kernel: [  282.953187] usb 4-2: configuration #1 chosen from 1 choice
May 26 17:06:25 tarm kernel: [  282.958536] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
May 26 17:06:25 tarm kernel: [  282.959408] pan1: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
May 26 17:06:25 tarm kernel: [  282.966418] usb 4-2: New USB device found, idVendor=0483, idProduct=2016
May 26 17:06:25 tarm kernel: [  282.966516] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:06:25 tarm kernel: [  282.966571] usb 4-2: Product: Biometric Coprocessor
May 26 17:06:25 tarm kernel: [  282.966622] usb 4-2: Manufacturer: STMicroelectronics
May 26 17:06:26 tarm kernel: [  284.497105] ADDRCONF(NETDEV_UP): eth0: link is not ready
May 26 17:06:27 tarm kernel: [  284.940986] __ratelimit: 41 messages suppressed
May 26 17:06:27 tarm kernel: [  284.941058] cpufreq-core: target for CPU 0: 114285 kHz, relation 0
May 26 17:06:32 tarm kernel: [  290.334663] ADDRCONF(NETDEV_UP): eth1: link is not ready
May 26 17:06:32 tarm kernel: [  290.441110] __ratelimit: 6 messages suppressed
May 26 17:06:32 tarm kernel: [  290.441265] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:06:33 tarm kernel: [  291.281839] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
May 26 17:06:36 tarm kernel: [  293.870899] tun0: Disabled Privacy Extensions
May 26 17:06:37 tarm kernel: [  294.940986] __ratelimit: 20 messages suppressed
May 26 17:06:37 tarm kernel: [  294.941101] cpufreq-core: target for CPU 0: 0 kHz, relation 0
May 26 17:06:44 tarm kernel: [  301.552982] eth1: no IPv6 routers present
May 26 17:07:01 tarm kernel: [  318.625003] __ratelimit: 20 messages suppressed
May 26 17:07:01 tarm kernel: [  318.625022] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:07:01 tarm kernel: [  318.625030] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:07:01 tarm kernel: [  318.625038] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:07:01 tarm kernel: [  318.625046] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:07:01 tarm kernel: [  319.047860] ehci_hcd 0000:00:1d.7: remove, state 4
May 26 17:07:01 tarm kernel: [  319.047874] usb usb1: USB disconnect, address 1
May 26 17:07:01 tarm kernel: [  319.079601] ehci_hcd 0000:00:1d.7: USB bus 1 deregistered
May 26 17:07:01 tarm kernel: [  319.079660] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
May 26 17:07:01 tarm kernel: [  319.080377] uhci_hcd 0000:00:1d.3: remove, state 4
May 26 17:07:01 tarm kernel: [  319.080387] usb usb5: USB disconnect, address 1
May 26 17:07:01 tarm kernel: [  319.080579] uhci_hcd 0000:00:1d.3: USB bus 5 deregistered
May 26 17:07:01 tarm kernel: [  319.080608] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
May 26 17:07:01 tarm kernel: [  319.080617] uhci_hcd 0000:00:1d.2: remove, state 1
May 26 17:07:01 tarm kernel: [  319.080624] usb usb4: USB disconnect, address 1
May 26 17:07:01 tarm kernel: [  319.080626] usb 4-1: USB disconnect, address 2
May 26 17:07:01 tarm kernel: [  319.338078] usb 4-2: USB disconnect, address 3
May 26 17:07:01 tarm kernel: [  319.340537] uhci_hcd 0000:00:1d.2: USB bus 4 deregistered
May 26 17:07:01 tarm kernel: [  319.340575] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
May 26 17:07:01 tarm kernel: [  319.340586] uhci_hcd 0000:00:1d.1: remove, state 1
May 26 17:07:01 tarm kernel: [  319.340593] usb usb3: USB disconnect, address 1
May 26 17:07:01 tarm kernel: [  319.340595] usb 3-1: USB disconnect, address 2
May 26 17:07:01 tarm kernel: [  319.361423] uhci_hcd 0000:00:1d.1: USB bus 3 deregistered
May 26 17:07:01 tarm kernel: [  319.361611] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
May 26 17:07:01 tarm kernel: [  319.361697] uhci_hcd 0000:00:1d.0: remove, state 4
May 26 17:07:01 tarm kernel: [  319.361706] usb usb2: USB disconnect, address 1
May 26 17:07:01 tarm kernel: [  319.361878] uhci_hcd 0000:00:1d.0: USB bus 2 deregistered
May 26 17:07:01 tarm kernel: [  319.361906] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
May 26 17:07:02 tarm kernel: [  320.125024] __ratelimit: 3 messages suppressed
May 26 17:07:02 tarm kernel: [  320.125149] cpufreq-core: target for CPU 0: 57142 kHz, relation 0
May 26 17:07:03 tarm kernel: [  321.072150] PM: Syncing filesystems ... done.
May 26 17:07:19 tarm kernel: [  321.137914] Freezing user space processes ... (elapsed 0.00 seconds) done.
May 26 17:07:19 tarm kernel: [  321.139290] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
May 26 17:07:19 tarm kernel: [  321.139371] Suspending console(s)
May 26 17:07:19 tarm kernel: [  321.356723] sd 0:0:0:0: [sda] Synchronizing SCSI cache
May 26 17:07:19 tarm kernel: [  321.365852] sd 0:0:0:0: [sda] Stopping disk
May 26 17:07:19 tarm kernel: [  322.821787] nsc-ircc 00:09: disabled
May 26 17:07:19 tarm kernel: [  322.821976] eth1: Going into suspend...
May 26 17:07:19 tarm kernel: [  322.826659] ACPI: PCI interrupt for device 0000:14:02.0 disabled
May 26 17:07:19 tarm kernel: [  322.826671] ACPI handle has no context!
May 26 17:07:19 tarm kernel: [  322.842141] ACPI handle has no context!
May 26 17:07:19 tarm kernel: [  322.842170] ACPI: PCI interrupt for device 0000:14:00.2 disabled
May 26 17:07:19 tarm kernel: [  322.842181] ACPI handle has no context!
May 26 17:07:19 tarm kernel: [  322.862080] ACPI handle has no context!
May 26 17:07:19 tarm kernel: [  323.018603] ACPI handle has no context!
May 26 17:07:19 tarm kernel: [  323.237051] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
May 26 17:07:19 tarm kernel: [  323.256304] ACPI: Preparing to enter system sleep state S3
May 26 17:07:19 tarm kernel: [  323.268938] Extended CMOS year: 2000
May 26 17:07:19 tarm kernel: [  323.268938] Intel machine check architecture supported.
May 26 17:07:19 tarm kernel: [  323.268953] Intel machine check reporting enabled on CPU#0.
May 26 17:07:19 tarm kernel: [  323.268967] Back to C!
May 26 17:07:19 tarm kernel: [  323.268967] Extended CMOS year: 2000
May 26 17:07:19 tarm kernel: [  323.268967] Force enabled HPET at resume
May 26 17:07:19 tarm kernel: [  323.269152] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 17:07:19 tarm kernel: [  323.269154] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:07:19 tarm kernel: [  323.269157] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:07:19 tarm kernel: [  323.269160] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:07:19 tarm kernel: [  323.269164] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:07:19 tarm kernel: [  323.269166] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:07:19 tarm kernel: [  323.269169] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:07:19 tarm kernel: [  323.269172] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
May 26 17:07:19 tarm kernel: [  323.269175] cpufreq-core: governor: change or update limits
May 26 17:07:19 tarm kernel: [  323.269177] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 17:07:19 tarm kernel: [  323.326536] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100107, writing 100507)
May 26 17:07:19 tarm kernel: [  323.326536] PCI: Setting latency timer of device 0000:00:01.0 to 64
May 26 17:07:19 tarm kernel: [  323.345052] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
May 26 17:07:19 tarm kernel: [  323.345076] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:07:19 tarm kernel: [  323.345082] PCI: Setting latency timer of device 0000:00:1b.0 to 64
May 26 17:07:19 tarm kernel: [  323.401171] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
May 26 17:07:19 tarm kernel: [  323.401243] PCI: Setting latency timer of device 0000:00:1c.0 to 64
May 26 17:07:19 tarm kernel: [  323.401295] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
May 26 17:07:19 tarm kernel: [  323.401358] PCI: Setting latency timer of device 0000:00:1c.1 to 64
May 26 17:07:19 tarm kernel: [  323.401419] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
May 26 17:07:19 tarm kernel: [  323.401482] PCI: Setting latency timer of device 0000:00:1c.2 to 64
May 26 17:07:19 tarm kernel: [  323.401543] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507)
May 26 17:07:19 tarm kernel: [  323.401606] PCI: Setting latency timer of device 0000:00:1c.3 to 64
May 26 17:07:19 tarm kernel: [  323.401622] PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10b)
May 26 17:07:19 tarm kernel: [  323.401669] PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b)
May 26 17:07:19 tarm kernel: [  323.401723] PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30b)
May 26 17:07:19 tarm kernel: [  323.401769] PM: Writing back config space on device 0000:00:1d.3 at offset f (was 400, writing 40b)
May 26 17:07:19 tarm kernel: [  323.401832] PM: Writing back config space on device 0000:00:1d.7 at offset f (was 400, writing 40b)
May 26 17:07:19 tarm kernel: [  323.401859] PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing b0004000)
May 26 17:07:19 tarm kernel: [  323.401876] PM: Writing back config space on device 0000:00:1d.7 at offset 1 (was 2900000, writing 2900102)
May 26 17:07:19 tarm kernel: [  323.401976] PCI: Setting latency timer of device 0000:00:1e.0 to 64
May 26 17:07:19 tarm kernel: [  323.417044] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00005, writing 2b80005)
May 26 17:07:19 tarm kernel: [  323.417064] PCI: Setting latency timer of device 0000:00:1f.2 to 64
May 26 17:07:19 tarm kernel: [  323.419257] PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100103, writing 100107)
May 26 17:07:19 tarm kernel: [  323.419321] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:07:19 tarm kernel: [  323.419326] PCI: Setting latency timer of device 0000:01:00.0 to 64
May 26 17:07:19 tarm kernel: [  323.419363] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing d4ff0000)
May 26 17:07:19 tarm kernel: [  323.419389] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 100106)
May 26 17:07:19 tarm kernel: [  323.757256] PM: Writing back config space on device 0000:14:00.1 at offset 4 (was 0, writing c0001000)
May 26 17:07:19 tarm kernel: [  323.757262] PM: Writing back config space on device 0000:14:00.1 at offset 3 (was 800000, writing 804000)
May 26 17:07:19 tarm kernel: [  323.757270] PM: Writing back config space on device 0000:14:00.1 at offset 1 (was 2100000, writing 2100106)
May 26 17:07:19 tarm kernel: [  323.769823] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
May 26 17:07:19 tarm kernel: [  323.769825] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
May 26 17:07:19 tarm kernel: [  323.777829] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 succeeded
May 26 17:07:19 tarm kernel: [  323.785831] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 succeeded
May 26 17:07:19 tarm kernel: [  323.810167] ata2.00: configured for UDMA/33
May 26 17:07:19 tarm kernel: [  323.812184] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[c0001000-c00017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
May 26 17:07:19 tarm kernel: [  323.837197] PM: Writing back config space on device 0000:14:00.2 at offset 4 (was 0, writing c0001800)
May 26 17:07:19 tarm kernel: [  323.837202] PM: Writing back config space on device 0000:14:00.2 at offset 3 (was 800000, writing 804000)
May 26 17:07:19 tarm kernel: [  323.837209] PM: Writing back config space on device 0000:14:00.2 at offset 1 (was 2100000, writing 2100106)
May 26 17:07:19 tarm kernel: [  323.837229] ACPI: PCI Interrupt 0000:14:00.2[C] -> GSI 18 (level, low) -> IRQ 18
May 26 17:07:19 tarm kernel: [  323.838273] eth1: Coming out of suspend...
May 26 17:07:19 tarm kernel: [  323.860123] ACPI: PCI Interrupt 0000:14:02.0[A] -> GSI 21 (level, low) -> IRQ 21
May 26 17:07:19 tarm kernel: [  323.860864] nsc-ircc 00:09: activated
May 26 17:07:19 tarm kernel: [  324.789657] sd 0:0:0:0: [sda] Starting disk
May 26 17:07:19 tarm kernel: [  325.125335] __ratelimit: 52 messages suppressed
May 26 17:07:19 tarm kernel: [  325.125339] cpufreq-core: target for CPU 0: 38085 kHz, relation 0
May 26 17:07:19 tarm kernel: [  325.125688] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
May 26 17:07:19 tarm kernel: [  325.125695] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
May 26 17:07:19 tarm kernel: [  325.125701] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
May 26 17:07:19 tarm kernel: [  325.125708] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
May 26 17:07:19 tarm kernel: [  325.126119] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
May 26 17:07:19 tarm kernel: [  325.149648] ata1.00: configured for UDMA/100
May 26 17:07:19 tarm kernel: [  325.173676] ata1.00: configured for UDMA/100
May 26 17:07:19 tarm kernel: [  325.173682] ata1: EH complete
May 26 17:07:19 tarm kernel: [  325.173775] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
May 26 17:07:19 tarm kernel: [  325.173817] sd 0:0:0:0: [sda] Write Protect is off
May 26 17:07:19 tarm kernel: [  325.173823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 26 17:07:19 tarm kernel: [  325.173896] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 26 17:07:19 tarm kernel: [  325.173968] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
May 26 17:07:19 tarm kernel: [  325.174008] sd 0:0:0:0: [sda] Write Protect is off
May 26 17:07:19 tarm kernel: [  325.174013] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 26 17:07:19 tarm kernel: [  325.174084] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 26 17:07:19 tarm kernel: [  327.870104] hdaps: initial latch check good (0x01).
May 26 17:07:19 tarm kernel: [  328.077513] Restarting tasks ... done.
May 26 17:07:19 tarm kernel: [  328.172324] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
May 26 17:07:19 tarm kernel: [  328.172586] PCI: Setting latency timer of device 0000:00:1d.7 to 64
May 26 17:07:19 tarm kernel: [  328.172726] ehci_hcd 0000:00:1d.7: EHCI Host Controller
May 26 17:07:19 tarm kernel: [  328.213571] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
May 26 17:07:19 tarm kernel: [  328.221618] ehci_hcd 0000:00:1d.7: debug port 1
May 26 17:07:19 tarm kernel: [  328.221789] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
May 26 17:07:19 tarm kernel: [  328.221944] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb0004000
May 26 17:07:19 tarm kernel: [  328.237572] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
May 26 17:07:19 tarm kernel: [  328.238055] usb usb1: configuration #1 chosen from 1 choice
May 26 17:07:19 tarm kernel: [  328.238247] hub 1-0:1.0: USB hub found
May 26 17:07:19 tarm kernel: [  328.238372] hub 1-0:1.0: 8 ports detected
May 26 17:07:19 tarm kernel: [  328.341642] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
May 26 17:07:19 tarm kernel: [  328.341880] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:07:19 tarm kernel: [  328.342007] usb usb1: Product: EHCI Host Controller
May 26 17:07:19 tarm kernel: [  328.342120] usb usb1: Manufacturer: Linux 2.6.26-rc3 ehci_hcd
May 26 17:07:19 tarm kernel: [  328.342235] usb usb1: SerialNumber: 0000:00:1d.7
May 26 17:07:19 tarm kernel: [  328.353090] USB Universal Host Controller Interface driver v3.0
May 26 17:07:19 tarm kernel: [  328.353174] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:07:19 tarm kernel: [  328.353194] PCI: Setting latency timer of device 0000:00:1d.0 to 64
May 26 17:07:19 tarm kernel: [  328.353202] uhci_hcd 0000:00:1d.0: UHCI Host Controller
May 26 17:07:19 tarm kernel: [  328.353261] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
May 26 17:07:19 tarm kernel: [  328.353298] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
May 26 17:07:19 tarm kernel: [  328.353532] usb usb2: configuration #1 chosen from 1 choice
May 26 17:07:19 tarm kernel: [  328.353598] hub 2-0:1.0: USB hub found
May 26 17:07:19 tarm kernel: [  328.353613] hub 2-0:1.0: 2 ports detected
May 26 17:07:19 tarm kernel: [  328.457151] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:07:19 tarm kernel: [  328.457377] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:07:19 tarm kernel: [  328.457501] usb usb2: Product: UHCI Host Controller
May 26 17:07:19 tarm kernel: [  328.457613] usb usb2: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:07:19 tarm kernel: [  328.457724] usb usb2: SerialNumber: 0000:00:1d.0
May 26 17:07:19 tarm kernel: [  328.457868] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
May 26 17:07:19 tarm kernel: [  328.458033] PCI: Setting latency timer of device 0000:00:1d.1 to 64
May 26 17:07:19 tarm kernel: [  328.458169] uhci_hcd 0000:00:1d.1: UHCI Host Controller
May 26 17:07:19 tarm kernel: [  328.458330] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
May 26 17:07:19 tarm kernel: [  328.458479] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
May 26 17:07:19 tarm kernel: [  328.458816] usb usb3: configuration #1 chosen from 1 choice
May 26 17:07:19 tarm kernel: [  328.458999] hub 3-0:1.0: USB hub found
May 26 17:07:19 tarm kernel: [  328.459121] hub 3-0:1.0: 2 ports detected
May 26 17:07:19 tarm kernel: [  328.533056] hub 1-0:1.0: unable to enumerate USB device on port 3
May 26 17:07:20 tarm kernel: [  328.565084] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:07:20 tarm kernel: [  328.565097] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:07:20 tarm kernel: [  328.565104] usb usb3: Product: UHCI Host Controller
May 26 17:07:20 tarm kernel: [  328.565109] usb usb3: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:07:20 tarm kernel: [  328.565115] usb usb3: SerialNumber: 0000:00:1d.1
May 26 17:07:20 tarm kernel: [  328.565159] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
May 26 17:07:20 tarm kernel: [  328.565178] PCI: Setting latency timer of device 0000:00:1d.2 to 64
May 26 17:07:20 tarm kernel: [  328.565186] uhci_hcd 0000:00:1d.2: UHCI Host Controller
May 26 17:07:20 tarm kernel: [  328.565240] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
May 26 17:07:20 tarm kernel: [  328.565276] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
May 26 17:07:20 tarm kernel: [  328.565511] usb usb4: configuration #1 chosen from 1 choice
May 26 17:07:20 tarm kernel: [  328.565579] hub 4-0:1.0: USB hub found
May 26 17:07:20 tarm kernel: [  328.565593] hub 4-0:1.0: 2 ports detected
May 26 17:07:20 tarm kernel: [  328.669053] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:07:20 tarm kernel: [  328.669060] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:07:20 tarm kernel: [  328.669063] usb usb4: Product: UHCI Host Controller
May 26 17:07:20 tarm kernel: [  328.669065] usb usb4: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:07:20 tarm kernel: [  328.669067] usb usb4: SerialNumber: 0000:00:1d.2
May 26 17:07:20 tarm kernel: [  328.669098] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
May 26 17:07:20 tarm kernel: [  328.669110] PCI: Setting latency timer of device 0000:00:1d.3 to 64
May 26 17:07:20 tarm kernel: [  328.669114] uhci_hcd 0000:00:1d.3: UHCI Host Controller
May 26 17:07:20 tarm kernel: [  328.669139] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
May 26 17:07:20 tarm kernel: [  328.669165] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
May 26 17:07:20 tarm kernel: [  328.669274] usb usb5: configuration #1 chosen from 1 choice
May 26 17:07:20 tarm kernel: [  328.669303] hub 5-0:1.0: USB hub found
May 26 17:07:20 tarm kernel: [  328.669310] hub 5-0:1.0: 2 ports detected
May 26 17:07:20 tarm kernel: [  328.776648] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:07:20 tarm kernel: [  328.776780] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:07:20 tarm kernel: [  328.776834] usb usb5: Product: UHCI Host Controller
May 26 17:07:20 tarm kernel: [  328.776885] usb usb5: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:07:20 tarm kernel: [  328.776936] usb usb5: SerialNumber: 0000:00:1d.3
May 26 17:07:20 tarm kernel: [  328.779921] hub 1-0:1.0: unable to enumerate USB device on port 5
May 26 17:07:20 tarm kernel: [  328.892529] [drm] Loading R300 Microcode
May 26 17:07:20 tarm kernel: [  329.017160] hub 1-0:1.0: unable to enumerate USB device on port 6
May 26 17:07:20 tarm kernel: [  329.257301] usb 3-1: new low speed USB device using uhci_hcd and address 2
May 26 17:07:20 tarm kernel: [  329.437971] usb 3-1: configuration #1 chosen from 1 choice
May 26 17:07:20 tarm kernel: [  329.465534] input: Logitech Trackball as /class/input/input14
May 26 17:07:20 tarm kernel: [  329.497198] input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.1-1
May 26 17:07:20 tarm kernel: [  329.497501] usb 3-1: New USB device found, idVendor=046d, idProduct=c404
May 26 17:07:20 tarm kernel: [  329.497557] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:07:20 tarm kernel: [  329.497609] usb 3-1: Product: Trackball
May 26 17:07:20 tarm kernel: [  329.497659] usb 3-1: Manufacturer: Logitech
May 26 17:07:21 tarm kernel: [  329.737045] usb 4-1: new full speed USB device using uhci_hcd and address 2
May 26 17:07:21 tarm kernel: [  329.913487] usb 4-1: configuration #1 chosen from 1 choice
May 26 17:07:21 tarm kernel: [  329.923683] usb 4-1: New USB device found, idVendor=0a5c, idProduct=2110
May 26 17:07:21 tarm kernel: [  329.923973] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:07:21 tarm kernel: [  329.924025] usb 4-1: Product: BCM2045B
May 26 17:07:21 tarm kernel: [  329.924072] usb 4-1: Manufacturer: Broadcom Corp
May 26 17:07:21 tarm kernel: [  330.172998] usb 4-2: new full speed USB device using uhci_hcd and address 3
May 26 17:07:21 tarm kernel: [  330.181692] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
May 26 17:07:21 tarm kernel: [  330.190476] pan1: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
May 26 17:07:21 tarm kernel: [  330.342681] usb 4-2: configuration #1 chosen from 1 choice
May 26 17:07:21 tarm kernel: [  330.349671] usb 4-2: New USB device found, idVendor=0483, idProduct=2016
May 26 17:07:21 tarm kernel: [  330.349780] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:07:21 tarm kernel: [  330.349835] usb 4-2: Product: Biometric Coprocessor
May 26 17:07:21 tarm kernel: [  330.349886] usb 4-2: Manufacturer: STMicroelectronics
May 26 17:07:21 tarm kernel: [  330.625099] __ratelimit: 20 messages suppressed
May 26 17:07:21 tarm kernel: [  330.625238] cpufreq-core: target for CPU 0: 1942857 kHz, relation 0
May 26 17:07:23 tarm kernel: [  332.637273] ADDRCONF(NETDEV_UP): eth0: link is not ready
May 26 17:07:29 tarm kernel: [  338.506662] ADDRCONF(NETDEV_UP): eth1: link is not ready
May 26 17:07:29 tarm kernel: [  338.625094] __ratelimit: 30 messages suppressed
May 26 17:07:29 tarm kernel: [  338.625267] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:07:30 tarm kernel: [  339.434521] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
May 26 17:07:33 tarm kernel: [  342.049414] tun0: Disabled Privacy Extensions
May 26 17:07:33 tarm kernel: [  342.625029] __ratelimit: 13 messages suppressed
May 26 17:07:33 tarm kernel: [  342.625186] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:07:39 tarm kernel: [  348.625008] __ratelimit: 27 messages suppressed
May 26 17:07:39 tarm kernel: [  348.625222] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:07:41 tarm kernel: [  350.124978] eth1: no IPv6 routers present
May 26 17:07:41 tarm kernel: [  350.625131] __ratelimit: 6 messages suppressed
May 26 17:07:41 tarm kernel: [  350.625143] cpufreq-core: target for CPU 0: 1485714 kHz, relation 0
May 26 17:07:46 tarm kernel: [  355.125008] __ratelimit: 25 messages suppressed
May 26 17:07:46 tarm kernel: [  355.125252] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:07:51 tarm kernel: [  360.124988] __ratelimit: 27 messages suppressed
May 26 17:07:51 tarm kernel: [  360.125128] cpufreq-core: target for CPU 0: 1314285 kHz, relation 0
May 26 17:08:02 tarm kernel: [  371.125078] __ratelimit: 39 messages suppressed
May 26 17:08:02 tarm kernel: [  371.125322] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:08:02 tarm kernel: [  371.125467] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:08:16 tarm kernel: [  385.625001] __ratelimit: 47 messages suppressed
May 26 17:08:16 tarm kernel: [  385.625020] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:08:16 tarm kernel: [  385.625028] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:08:16 tarm kernel: [  385.625036] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:08:17 tarm kernel: [  386.157723] ehci_hcd 0000:00:1d.7: remove, state 4
May 26 17:08:17 tarm kernel: [  386.157853] usb usb1: USB disconnect, address 1
May 26 17:08:17 tarm kernel: [  386.181821] ehci_hcd 0000:00:1d.7: USB bus 1 deregistered
May 26 17:08:17 tarm kernel: [  386.182020] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
May 26 17:08:17 tarm kernel: [  386.182887] uhci_hcd 0000:00:1d.3: remove, state 4
May 26 17:08:17 tarm kernel: [  386.182899] usb usb5: USB disconnect, address 1
May 26 17:08:17 tarm kernel: [  386.183094] uhci_hcd 0000:00:1d.3: USB bus 5 deregistered
May 26 17:08:17 tarm kernel: [  386.183123] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
May 26 17:08:17 tarm kernel: [  386.183132] uhci_hcd 0000:00:1d.2: remove, state 1
May 26 17:08:17 tarm kernel: [  386.183139] usb usb4: USB disconnect, address 1
May 26 17:08:17 tarm kernel: [  386.183141] usb 4-1: USB disconnect, address 2
May 26 17:08:17 tarm kernel: [  386.438098] usb 4-2: USB disconnect, address 3
May 26 17:08:17 tarm kernel: [  386.440480] uhci_hcd 0000:00:1d.2: USB bus 4 deregistered
May 26 17:08:17 tarm kernel: [  386.440624] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
May 26 17:08:17 tarm kernel: [  386.440690] uhci_hcd 0000:00:1d.1: remove, state 1
May 26 17:08:17 tarm kernel: [  386.440749] usb usb3: USB disconnect, address 1
May 26 17:08:17 tarm kernel: [  386.440802] usb 3-1: USB disconnect, address 2
May 26 17:08:17 tarm kernel: [  386.465468] uhci_hcd 0000:00:1d.1: USB bus 3 deregistered
May 26 17:08:17 tarm kernel: [  386.465640] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
May 26 17:08:17 tarm kernel: [  386.465709] uhci_hcd 0000:00:1d.0: remove, state 4
May 26 17:08:17 tarm kernel: [  386.465785] usb usb2: USB disconnect, address 1
May 26 17:08:17 tarm kernel: [  386.466014] uhci_hcd 0000:00:1d.0: USB bus 2 deregistered
May 26 17:08:17 tarm kernel: [  386.466101] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
May 26 17:08:19 tarm kernel: [  388.361475] PM: Syncing filesystems ... done.
May 26 17:08:32 tarm kernel: [  388.430003] Freezing user space processes ... (elapsed 0.00 seconds) done.
May 26 17:08:32 tarm kernel: [  388.431517] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
May 26 17:08:32 tarm kernel: [  388.431599] Suspending console(s)
May 26 17:08:32 tarm kernel: [  388.643461] sd 0:0:0:0: [sda] Synchronizing SCSI cache
May 26 17:08:32 tarm kernel: [  388.643572] sd 0:0:0:0: [sda] Stopping disk
May 26 17:08:32 tarm kernel: [  390.058000] nsc-ircc 00:09: disabled
May 26 17:08:32 tarm kernel: [  390.058190] eth1: Going into suspend...
May 26 17:08:32 tarm kernel: [  390.063072] ACPI: PCI interrupt for device 0000:14:02.0 disabled
May 26 17:08:32 tarm kernel: [  390.063083] ACPI handle has no context!
May 26 17:08:32 tarm kernel: [  390.078142] ACPI handle has no context!
May 26 17:08:32 tarm kernel: [  390.078171] ACPI: PCI interrupt for device 0000:14:00.2 disabled
May 26 17:08:32 tarm kernel: [  390.078181] ACPI handle has no context!
May 26 17:08:32 tarm kernel: [  390.098077] ACPI handle has no context!
May 26 17:08:32 tarm kernel: [  390.254616] ACPI handle has no context!
May 26 17:08:32 tarm kernel: [  390.473051] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
May 26 17:08:32 tarm kernel: [  390.492624] ACPI: Preparing to enter system sleep state S3
May 26 17:08:32 tarm kernel: [  390.505459] Extended CMOS year: 2000
May 26 17:08:32 tarm kernel: [  390.505550] __ratelimit: 30 messages suppressed
May 26 17:08:32 tarm kernel: [  390.505555] cpufreq-core: suspending cpu 0
May 26 17:08:32 tarm kernel: [  390.505555] Intel machine check architecture supported.
May 26 17:08:32 tarm kernel: [  390.505571] Intel machine check reporting enabled on CPU#0.
May 26 17:08:32 tarm kernel: [  390.505672] Back to C!
May 26 17:08:32 tarm kernel: [  390.505970] Extended CMOS year: 2000
May 26 17:08:32 tarm kernel: [  390.505976] Force enabled HPET at resume
May 26 17:08:32 tarm kernel: [  390.506151] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 17:08:32 tarm kernel: [  390.506153] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:08:32 tarm kernel: [  390.506156] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:08:32 tarm kernel: [  390.506159] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:08:32 tarm kernel: [  390.506163] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:08:32 tarm kernel: [  390.506165] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:08:32 tarm kernel: [  390.506168] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:08:32 tarm kernel: [  390.506171] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
May 26 17:08:32 tarm kernel: [  390.506173] cpufreq-core: governor: change or update limits
May 26 17:08:32 tarm kernel: [  390.506176] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 17:08:32 tarm kernel: [  390.558306] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100107, writing 100507)
May 26 17:08:32 tarm kernel: [  390.558306] PCI: Setting latency timer of device 0000:00:01.0 to 64
May 26 17:08:32 tarm kernel: [  390.581103] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
May 26 17:08:32 tarm kernel: [  390.581126] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:08:32 tarm kernel: [  390.581133] PCI: Setting latency timer of device 0000:00:1b.0 to 64
May 26 17:08:32 tarm kernel: [  390.637242] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
May 26 17:08:32 tarm kernel: [  390.637328] PCI: Setting latency timer of device 0000:00:1c.0 to 64
May 26 17:08:32 tarm kernel: [  390.637410] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
May 26 17:08:32 tarm kernel: [  390.637505] PCI: Setting latency timer of device 0000:00:1c.1 to 64
May 26 17:08:32 tarm kernel: [  390.637577] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
May 26 17:08:32 tarm kernel: [  390.637674] PCI: Setting latency timer of device 0000:00:1c.2 to 64
May 26 17:08:32 tarm kernel: [  390.637755] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507)
May 26 17:08:32 tarm kernel: [  390.637840] PCI: Setting latency timer of device 0000:00:1c.3 to 64
May 26 17:08:32 tarm kernel: [  390.637862] PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10b)
May 26 17:08:32 tarm kernel: [  390.637928] PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b)
May 26 17:08:32 tarm kernel: [  390.637994] PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30b)
May 26 17:08:32 tarm kernel: [  390.638070] PM: Writing back config space on device 0000:00:1d.3 at offset f (was 400, writing 40b)
May 26 17:08:32 tarm kernel: [  390.638153] PM: Writing back config space on device 0000:00:1d.7 at offset f (was 400, writing 40b)
May 26 17:08:32 tarm kernel: [  390.638197] PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing b0004000)
May 26 17:08:32 tarm kernel: [  390.638210] PM: Writing back config space on device 0000:00:1d.7 at offset 1 (was 2900000, writing 2900102)
May 26 17:08:32 tarm kernel: [  390.638278] PCI: Setting latency timer of device 0000:00:1e.0 to 64
May 26 17:08:32 tarm kernel: [  390.653060] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00005, writing 2b80005)
May 26 17:08:32 tarm kernel: [  390.653088] PCI: Setting latency timer of device 0000:00:1f.2 to 64
May 26 17:08:32 tarm kernel: [  390.657638] PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100103, writing 100107)
May 26 17:08:32 tarm kernel: [  390.657780] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:08:32 tarm kernel: [  390.657790] PCI: Setting latency timer of device 0000:01:00.0 to 64
May 26 17:08:32 tarm kernel: [  390.657836] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing f4ff0000)
May 26 17:08:32 tarm kernel: [  390.657869] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 100106)
May 26 17:08:32 tarm kernel: [  390.993061] PM: Writing back config space on device 0000:14:00.1 at offset 4 (was 0, writing c0001000)
May 26 17:08:32 tarm kernel: [  390.993073] PM: Writing back config space on device 0000:14:00.1 at offset 3 (was 800000, writing 804000)
May 26 17:08:32 tarm kernel: [  390.993086] PM: Writing back config space on device 0000:14:00.1 at offset 1 (was 2100000, writing 2100106)
May 26 17:08:32 tarm kernel: [  391.009856] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
May 26 17:08:32 tarm kernel: [  391.009864] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
May 26 17:08:32 tarm kernel: [  391.017888] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 succeeded
May 26 17:08:32 tarm kernel: [  391.025904] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 succeeded
May 26 17:08:32 tarm kernel: [  391.047869] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[c0001000-c00017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
May 26 17:08:32 tarm kernel: [  391.050421] ata2.00: configured for UDMA/33
May 26 17:08:32 tarm kernel: [  391.073461] PM: Writing back config space on device 0000:14:00.2 at offset 4 (was 0, writing c0001800)
May 26 17:08:32 tarm kernel: [  391.073472] PM: Writing back config space on device 0000:14:00.2 at offset 3 (was 800000, writing 804000)
May 26 17:08:32 tarm kernel: [  391.073484] PM: Writing back config space on device 0000:14:00.2 at offset 1 (was 2100000, writing 2100106)
May 26 17:08:32 tarm kernel: [  391.073512] ACPI: PCI Interrupt 0000:14:00.2[C] -> GSI 18 (level, low) -> IRQ 18
May 26 17:08:32 tarm kernel: [  391.074571] eth1: Coming out of suspend...
May 26 17:08:32 tarm kernel: [  391.096419] ACPI: PCI Interrupt 0000:14:02.0[A] -> GSI 21 (level, low) -> IRQ 21
May 26 17:08:32 tarm kernel: [  391.098552] nsc-ircc 00:09: activated
May 26 17:08:32 tarm kernel: [  392.015855] sd 0:0:0:0: [sda] Starting disk
May 26 17:08:32 tarm kernel: [  392.325719] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
May 26 17:08:32 tarm kernel: [  392.325726] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
May 26 17:08:32 tarm kernel: [  392.325733] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
May 26 17:08:32 tarm kernel: [  392.325739] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
May 26 17:08:32 tarm kernel: [  392.326166] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
May 26 17:08:32 tarm kernel: [  392.349666] ata1.00: configured for UDMA/100
May 26 17:08:32 tarm kernel: [  392.373671] ata1.00: configured for UDMA/100
May 26 17:08:32 tarm kernel: [  392.373677] ata1: EH complete
May 26 17:08:32 tarm kernel: [  392.373769] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
May 26 17:08:32 tarm kernel: [  392.373812] sd 0:0:0:0: [sda] Write Protect is off
May 26 17:08:32 tarm kernel: [  392.373818] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 26 17:08:32 tarm kernel: [  392.373891] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 26 17:08:32 tarm kernel: [  392.373963] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
May 26 17:08:32 tarm kernel: [  392.374002] sd 0:0:0:0: [sda] Write Protect is off
May 26 17:08:32 tarm kernel: [  392.374007] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 26 17:08:32 tarm kernel: [  392.374079] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 26 17:08:32 tarm kernel: [  395.076118] hdaps: initial latch check good (0x01).
May 26 17:08:32 tarm kernel: [  395.281513] Restarting tasks ... done.
May 26 17:08:32 tarm kernel: [  395.386376] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
May 26 17:08:32 tarm kernel: [  395.386665] PCI: Setting latency timer of device 0000:00:1d.7 to 64
May 26 17:08:32 tarm kernel: [  395.386808] ehci_hcd 0000:00:1d.7: EHCI Host Controller
May 26 17:08:32 tarm kernel: [  395.431301] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
May 26 17:08:32 tarm kernel: [  395.436500] ehci_hcd 0000:00:1d.7: debug port 1
May 26 17:08:32 tarm kernel: [  395.436653] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
May 26 17:08:32 tarm kernel: [  395.436811] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb0004000
May 26 17:08:32 tarm kernel: [  395.449033] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
May 26 17:08:32 tarm kernel: [  395.449494] usb usb1: configuration #1 chosen from 1 choice
May 26 17:08:32 tarm kernel: [  395.450112] hub 1-0:1.0: USB hub found
May 26 17:08:32 tarm kernel: [  395.453020] hub 1-0:1.0: 8 ports detected
May 26 17:08:32 tarm kernel: [  395.557146] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
May 26 17:08:32 tarm kernel: [  395.557389] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:08:32 tarm kernel: [  395.557517] usb usb1: Product: EHCI Host Controller
May 26 17:08:32 tarm kernel: [  395.557635] usb usb1: Manufacturer: Linux 2.6.26-rc3 ehci_hcd
May 26 17:08:32 tarm kernel: [  395.557751] usb usb1: SerialNumber: 0000:00:1d.7
May 26 17:08:32 tarm kernel: [  395.568587] USB Universal Host Controller Interface driver v3.0
May 26 17:08:32 tarm kernel: [  395.568671] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:08:32 tarm kernel: [  395.568691] PCI: Setting latency timer of device 0000:00:1d.0 to 64
May 26 17:08:32 tarm kernel: [  395.568699] uhci_hcd 0000:00:1d.0: UHCI Host Controller
May 26 17:08:32 tarm kernel: [  395.568757] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
May 26 17:08:32 tarm kernel: [  395.568794] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
May 26 17:08:32 tarm kernel: [  395.569035] usb usb2: configuration #1 chosen from 1 choice
May 26 17:08:32 tarm kernel: [  395.569099] hub 2-0:1.0: USB hub found
May 26 17:08:32 tarm kernel: [  395.569114] hub 2-0:1.0: 2 ports detected
May 26 17:08:32 tarm kernel: [  395.627759] __ratelimit: 46 messages suppressed
May 26 17:08:32 tarm kernel: [  395.627959] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:08:32 tarm kernel: [  395.674509] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:08:32 tarm kernel: [  395.674516] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:08:32 tarm kernel: [  395.674519] usb usb2: Product: UHCI Host Controller
May 26 17:08:32 tarm kernel: [  395.674521] usb usb2: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:08:32 tarm kernel: [  395.674523] usb usb2: SerialNumber: 0000:00:1d.0
May 26 17:08:32 tarm kernel: [  395.674552] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
May 26 17:08:32 tarm kernel: [  395.674564] PCI: Setting latency timer of device 0000:00:1d.1 to 64
May 26 17:08:32 tarm kernel: [  395.674568] uhci_hcd 0000:00:1d.1: UHCI Host Controller
May 26 17:08:32 tarm kernel: [  395.674592] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
May 26 17:08:32 tarm kernel: [  395.674619] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
May 26 17:08:32 tarm kernel: [  395.674724] usb usb3: configuration #1 chosen from 1 choice
May 26 17:08:32 tarm kernel: [  395.674753] hub 3-0:1.0: USB hub found
May 26 17:08:32 tarm kernel: [  395.674759] hub 3-0:1.0: 2 ports detected
May 26 17:08:32 tarm kernel: [  395.749009] hub 1-0:1.0: unable to enumerate USB device on port 3
May 26 17:08:32 tarm kernel: [  395.777062] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:08:32 tarm kernel: [  395.777941] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:08:32 tarm kernel: [  395.778017] usb usb3: Product: UHCI Host Controller
May 26 17:08:32 tarm kernel: [  395.778070] usb usb3: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:08:32 tarm kernel: [  395.778121] usb usb3: SerialNumber: 0000:00:1d.1
May 26 17:08:32 tarm kernel: [  395.778204] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
May 26 17:08:32 tarm kernel: [  395.778287] PCI: Setting latency timer of device 0000:00:1d.2 to 64
May 26 17:08:32 tarm kernel: [  395.778580] uhci_hcd 0000:00:1d.2: UHCI Host Controller
May 26 17:08:32 tarm kernel: [  395.778659] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
May 26 17:08:32 tarm kernel: [  395.778738] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
May 26 17:08:32 tarm kernel: [  395.778895] usb usb4: configuration #1 chosen from 1 choice
May 26 17:08:32 tarm kernel: [  395.778978] hub 4-0:1.0: USB hub found
May 26 17:08:32 tarm kernel: [  395.779034] hub 4-0:1.0: 2 ports detected
May 26 17:08:33 tarm kernel: [  395.881086] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:08:33 tarm kernel: [  395.882354] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:08:33 tarm kernel: [  395.882435] usb usb4: Product: UHCI Host Controller
May 26 17:08:33 tarm kernel: [  395.882488] usb usb4: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:08:33 tarm kernel: [  395.882539] usb usb4: SerialNumber: 0000:00:1d.2
May 26 17:08:33 tarm kernel: [  395.882621] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
May 26 17:08:33 tarm kernel: [  395.882705] PCI: Setting latency timer of device 0000:00:1d.3 to 64
May 26 17:08:33 tarm kernel: [  395.882769] uhci_hcd 0000:00:1d.3: UHCI Host Controller
May 26 17:08:33 tarm kernel: [  395.882850] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
May 26 17:08:33 tarm kernel: [  395.882929] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
May 26 17:08:33 tarm kernel: [  395.883100] usb usb5: configuration #1 chosen from 1 choice
May 26 17:08:33 tarm kernel: [  395.883184] hub 5-0:1.0: USB hub found
May 26 17:08:33 tarm kernel: [  395.883241] hub 5-0:1.0: 2 ports detected
May 26 17:08:33 tarm kernel: [  395.985064] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:08:33 tarm kernel: [  395.986151] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:08:33 tarm kernel: [  395.986229] usb usb5: Product: UHCI Host Controller
May 26 17:08:33 tarm kernel: [  395.986281] usb usb5: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:08:33 tarm kernel: [  395.986333] usb usb5: SerialNumber: 0000:00:1d.3
May 26 17:08:33 tarm kernel: [  395.989846] hub 1-0:1.0: unable to enumerate USB device on port 5
May 26 17:08:33 tarm kernel: [  396.108565] [drm] Loading R300 Microcode
May 26 17:08:33 tarm kernel: [  396.229007] hub 1-0:1.0: unable to enumerate USB device on port 6
May 26 17:08:33 tarm kernel: [  396.469536] usb 3-1: new low speed USB device using uhci_hcd and address 2
May 26 17:08:34 tarm kernel: [  396.650560] usb 3-1: configuration #1 chosen from 1 choice
May 26 17:08:34 tarm kernel: [  396.680441] input: Logitech Trackball as /class/input/input15
May 26 17:08:34 tarm kernel: [  396.717720] input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.1-1
May 26 17:08:34 tarm kernel: [  396.718015] usb 3-1: New USB device found, idVendor=046d, idProduct=c404
May 26 17:08:34 tarm kernel: [  396.718082] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:08:34 tarm kernel: [  396.718144] usb 3-1: Product: Trackball
May 26 17:08:34 tarm kernel: [  396.718201] usb 3-1: Manufacturer: Logitech
May 26 17:08:34 tarm kernel: [  396.956990] usb 4-1: new full speed USB device using uhci_hcd and address 2
May 26 17:08:34 tarm kernel: [  397.135654] usb 4-1: configuration #1 chosen from 1 choice
May 26 17:08:34 tarm kernel: [  397.140242] usb 4-1: New USB device found, idVendor=0a5c, idProduct=2110
May 26 17:08:34 tarm kernel: [  397.140318] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:08:34 tarm kernel: [  397.140379] usb 4-1: Product: BCM2045B
May 26 17:08:34 tarm kernel: [  397.140435] usb 4-1: Manufacturer: Broadcom Corp
May 26 17:08:34 tarm kernel: [  397.385029] usb 4-2: new full speed USB device using uhci_hcd and address 3
May 26 17:08:34 tarm kernel: [  397.457527] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
May 26 17:08:34 tarm kernel: [  397.465569] pan1: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
May 26 17:08:35 tarm kernel: [  397.763494] usb 4-2: configuration #1 chosen from 1 choice
May 26 17:08:35 tarm kernel: [  397.768596] usb 4-2: New USB device found, idVendor=0483, idProduct=2016
May 26 17:08:35 tarm kernel: [  397.769080] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:08:35 tarm kernel: [  397.769150] usb 4-2: Product: Biometric Coprocessor
May 26 17:08:35 tarm kernel: [  397.769199] usb 4-2: Manufacturer: STMicroelectronics
May 26 17:08:36 tarm kernel: [  399.389868] ADDRCONF(NETDEV_UP): eth0: link is not ready
May 26 17:08:37 tarm kernel: [  400.124987] __ratelimit: 44 messages suppressed
May 26 17:08:37 tarm kernel: [  400.125122] cpufreq-core: target for CPU 0: 571428 kHz, relation 0
May 26 17:08:42 tarm kernel: [  405.234652] ADDRCONF(NETDEV_UP): eth1: link is not ready
May 26 17:08:43 tarm kernel: [  405.625001] __ratelimit: 20 messages suppressed
May 26 17:08:43 tarm kernel: [  405.625197] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:08:43 tarm kernel: [  406.155271] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
May 26 17:08:49 tarm kernel: [  411.836137] tun0: Disabled Privacy Extensions
May 26 17:08:49 tarm kernel: [  412.125004] __ratelimit: 13 messages suppressed
May 26 17:08:49 tarm kernel: [  412.125234] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:08:53 tarm kernel: [  416.156982] eth1: no IPv6 routers present
May 26 17:08:58 tarm kernel: [  420.625017] __ratelimit: 20 messages suppressed
May 26 17:08:58 tarm kernel: [  420.625261] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:08:58 tarm kernel: [  420.625405] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:09:09 tarm kernel: [  431.625006] __ratelimit: 12 messages suppressed
May 26 17:09:09 tarm kernel: [  431.625024] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:09:09 tarm kernel: [  431.625033] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:09:09 tarm kernel: [  432.106648] ehci_hcd 0000:00:1d.7: remove, state 4
May 26 17:09:09 tarm kernel: [  432.106662] usb usb1: USB disconnect, address 1
May 26 17:09:09 tarm kernel: [  432.129147] ehci_hcd 0000:00:1d.7: USB bus 1 deregistered
May 26 17:09:09 tarm kernel: [  432.129358] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
May 26 17:09:09 tarm kernel: [  432.130197] uhci_hcd 0000:00:1d.3: remove, state 4
May 26 17:09:09 tarm kernel: [  432.130209] usb usb5: USB disconnect, address 1
May 26 17:09:09 tarm kernel: [  432.130403] uhci_hcd 0000:00:1d.3: USB bus 5 deregistered
May 26 17:09:09 tarm kernel: [  432.130431] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
May 26 17:09:09 tarm kernel: [  432.130441] uhci_hcd 0000:00:1d.2: remove, state 1
May 26 17:09:09 tarm kernel: [  432.130448] usb usb4: USB disconnect, address 1
May 26 17:09:09 tarm kernel: [  432.130450] usb 4-1: USB disconnect, address 2
May 26 17:09:09 tarm kernel: [  432.390092] usb 4-2: USB disconnect, address 3
May 26 17:09:09 tarm kernel: [  432.392457] uhci_hcd 0000:00:1d.2: USB bus 4 deregistered
May 26 17:09:09 tarm kernel: [  432.392601] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
May 26 17:09:09 tarm kernel: [  432.392669] uhci_hcd 0000:00:1d.1: remove, state 1
May 26 17:09:09 tarm kernel: [  432.392728] usb usb3: USB disconnect, address 1
May 26 17:09:09 tarm kernel: [  432.392779] usb 3-1: USB disconnect, address 2
May 26 17:09:09 tarm kernel: [  432.413423] uhci_hcd 0000:00:1d.1: USB bus 3 deregistered
May 26 17:09:09 tarm kernel: [  432.413615] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
May 26 17:09:09 tarm kernel: [  432.413700] uhci_hcd 0000:00:1d.0: remove, state 4
May 26 17:09:09 tarm kernel: [  432.413710] usb usb2: USB disconnect, address 1
May 26 17:09:09 tarm kernel: [  432.413883] uhci_hcd 0000:00:1d.0: USB bus 2 deregistered
May 26 17:09:09 tarm kernel: [  432.413911] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
May 26 17:09:11 tarm kernel: [  434.070883] PM: Syncing filesystems ... done.
May 26 17:09:29 tarm kernel: [  434.175318] Freezing user space processes ... (elapsed 0.00 seconds) done.
May 26 17:09:29 tarm kernel: [  434.176725] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
May 26 17:09:29 tarm kernel: [  434.176924] Suspending console(s)
May 26 17:09:29 tarm kernel: [  434.388778] sd 0:0:0:0: [sda] Synchronizing SCSI cache
May 26 17:09:29 tarm kernel: [  434.388828] sd 0:0:0:0: [sda] Stopping disk
May 26 17:09:29 tarm kernel: [  434.836986] __ratelimit: 19 messages suppressed
May 26 17:09:29 tarm kernel: [  434.836988] cpufreq-core: target for CPU 0: 285714 kHz, relation 0
May 26 17:09:29 tarm kernel: [  435.841790] nsc-ircc 00:09: disabled
May 26 17:09:29 tarm kernel: [  435.841980] eth1: Going into suspend...
May 26 17:09:29 tarm kernel: [  435.847145] ACPI: PCI interrupt for device 0000:14:02.0 disabled
May 26 17:09:29 tarm kernel: [  435.847156] ACPI handle has no context!
May 26 17:09:29 tarm kernel: [  435.862140] ACPI handle has no context!
May 26 17:09:29 tarm kernel: [  435.862169] ACPI: PCI interrupt for device 0000:14:00.2 disabled
May 26 17:09:29 tarm kernel: [  435.862179] ACPI handle has no context!
May 26 17:09:29 tarm kernel: [  435.882079] ACPI handle has no context!
May 26 17:09:29 tarm kernel: [  436.038608] ACPI handle has no context!
May 26 17:09:29 tarm kernel: [  436.257053] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
May 26 17:09:29 tarm kernel: [  436.276712] ACPI: Preparing to enter system sleep state S3
May 26 17:09:29 tarm kernel: [  436.289286] Extended CMOS year: 2000
May 26 17:09:29 tarm kernel: [  436.289286] Intel machine check architecture supported.
May 26 17:09:29 tarm kernel: [  436.289302] Intel machine check reporting enabled on CPU#0.
May 26 17:09:29 tarm kernel: [  436.289403] Back to C!
May 26 17:09:29 tarm kernel: [  436.289697] Extended CMOS year: 2000
May 26 17:09:29 tarm kernel: [  436.289703] Force enabled HPET at resume
May 26 17:09:29 tarm kernel: [  436.289878] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 17:09:29 tarm kernel: [  436.289880] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:09:29 tarm kernel: [  436.289883] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:09:29 tarm kernel: [  436.289886] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:09:29 tarm kernel: [  436.289890] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:09:29 tarm kernel: [  436.289893] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:09:29 tarm kernel: [  436.289895] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:09:29 tarm kernel: [  436.289898] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
May 26 17:09:29 tarm kernel: [  436.289900] cpufreq-core: governor: change or update limits
May 26 17:09:29 tarm kernel: [  436.289903] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 17:09:29 tarm kernel: [  436.349423] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100107, writing 100507)
May 26 17:09:29 tarm kernel: [  436.349423] PCI: Setting latency timer of device 0000:00:01.0 to 64
May 26 17:09:29 tarm kernel: [  436.365016] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
May 26 17:09:29 tarm kernel: [  436.365040] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:09:29 tarm kernel: [  436.365046] PCI: Setting latency timer of device 0000:00:1b.0 to 64
May 26 17:09:29 tarm kernel: [  436.421172] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
May 26 17:09:29 tarm kernel: [  436.421245] PCI: Setting latency timer of device 0000:00:1c.0 to 64
May 26 17:09:29 tarm kernel: [  436.421296] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
May 26 17:09:29 tarm kernel: [  436.421369] PCI: Setting latency timer of device 0000:00:1c.1 to 64
May 26 17:09:29 tarm kernel: [  436.421420] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
May 26 17:09:29 tarm kernel: [  436.421483] PCI: Setting latency timer of device 0000:00:1c.2 to 64
May 26 17:09:29 tarm kernel: [  436.421544] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507)
May 26 17:09:29 tarm kernel: [  436.421607] PCI: Setting latency timer of device 0000:00:1c.3 to 64
May 26 17:09:29 tarm kernel: [  436.421623] PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10b)
May 26 17:09:29 tarm kernel: [  436.421669] PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b)
May 26 17:09:29 tarm kernel: [  436.421724] PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30b)
May 26 17:09:29 tarm kernel: [  436.421770] PM: Writing back config space on device 0000:00:1d.3 at offset f (was 400, writing 40b)
May 26 17:09:29 tarm kernel: [  436.421832] PM: Writing back config space on device 0000:00:1d.7 at offset f (was 400, writing 40b)
May 26 17:09:29 tarm kernel: [  436.421859] PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing b0004000)
May 26 17:09:29 tarm kernel: [  436.421876] PM: Writing back config space on device 0000:00:1d.7 at offset 1 (was 2900000, writing 2900102)
May 26 17:09:29 tarm kernel: [  436.421976] PCI: Setting latency timer of device 0000:00:1e.0 to 64
May 26 17:09:29 tarm kernel: [  436.437045] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00005, writing 2b80005)
May 26 17:09:29 tarm kernel: [  436.437064] PCI: Setting latency timer of device 0000:00:1f.2 to 64
May 26 17:09:29 tarm kernel: [  436.439261] PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100103, writing 100107)
May 26 17:09:29 tarm kernel: [  436.439325] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:09:29 tarm kernel: [  436.439330] PCI: Setting latency timer of device 0000:01:00.0 to 64
May 26 17:09:29 tarm kernel: [  436.439367] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing fcff0000)
May 26 17:09:29 tarm kernel: [  436.439393] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 100106)
May 26 17:09:29 tarm kernel: [  436.777257] PM: Writing back config space on device 0000:14:00.1 at offset 4 (was 0, writing c0001000)
May 26 17:09:29 tarm kernel: [  436.777264] PM: Writing back config space on device 0000:14:00.1 at offset 3 (was 800000, writing 804000)
May 26 17:09:29 tarm kernel: [  436.777272] PM: Writing back config space on device 0000:14:00.1 at offset 1 (was 2100000, writing 2100106)
May 26 17:09:29 tarm kernel: [  436.789823] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
May 26 17:09:29 tarm kernel: [  436.789826] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
May 26 17:09:29 tarm kernel: [  436.797829] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 succeeded
May 26 17:09:29 tarm kernel: [  436.805832] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 succeeded
May 26 17:09:29 tarm kernel: [  436.830164] ata2.00: configured for UDMA/33
May 26 17:09:29 tarm kernel: [  436.832182] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[c0001000-c00017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
May 26 17:09:29 tarm kernel: [  436.857195] PM: Writing back config space on device 0000:14:00.2 at offset 4 (was 0, writing c0001800)
May 26 17:09:29 tarm kernel: [  436.857201] PM: Writing back config space on device 0000:14:00.2 at offset 3 (was 800000, writing 804000)
May 26 17:09:29 tarm kernel: [  436.857208] PM: Writing back config space on device 0000:14:00.2 at offset 1 (was 2100000, writing 2100106)
May 26 17:09:29 tarm kernel: [  436.857228] ACPI: PCI Interrupt 0000:14:00.2[C] -> GSI 18 (level, low) -> IRQ 18
May 26 17:09:29 tarm kernel: [  436.858272] eth1: Coming out of suspend...
May 26 17:09:29 tarm kernel: [  436.880121] ACPI: PCI Interrupt 0000:14:02.0[A] -> GSI 21 (level, low) -> IRQ 21
May 26 17:09:29 tarm kernel: [  436.880863] nsc-ircc 00:09: activated
May 26 17:09:29 tarm kernel: [  437.816800] sd 0:0:0:0: [sda] Starting disk
May 26 17:09:29 tarm kernel: [  438.273716] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
May 26 17:09:29 tarm kernel: [  438.273723] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
May 26 17:09:29 tarm kernel: [  438.273730] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
May 26 17:09:29 tarm kernel: [  438.273736] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
May 26 17:09:29 tarm kernel: [  438.274160] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
May 26 17:09:29 tarm kernel: [  438.297669] ata1.00: configured for UDMA/100
May 26 17:09:29 tarm kernel: [  438.321673] ata1.00: configured for UDMA/100
May 26 17:09:29 tarm kernel: [  438.321680] ata1: EH complete
May 26 17:09:29 tarm kernel: [  438.321772] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
May 26 17:09:29 tarm kernel: [  438.321814] sd 0:0:0:0: [sda] Write Protect is off
May 26 17:09:29 tarm kernel: [  438.321820] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 26 17:09:29 tarm kernel: [  438.321892] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 26 17:09:29 tarm kernel: [  438.321963] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
May 26 17:09:29 tarm kernel: [  438.322002] sd 0:0:0:0: [sda] Write Protect is off
May 26 17:09:29 tarm kernel: [  438.322008] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 26 17:09:29 tarm kernel: [  438.322078] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 26 17:09:29 tarm kernel: [  441.032641] hdaps: initial latch check good (0x01).
May 26 17:09:29 tarm kernel: [  443.277512] Restarting tasks ... done.
May 26 17:09:29 tarm kernel: [  443.381823] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
May 26 17:09:29 tarm kernel: [  443.382092] PCI: Setting latency timer of device 0000:00:1d.7 to 64
May 26 17:09:29 tarm kernel: [  443.382235] ehci_hcd 0000:00:1d.7: EHCI Host Controller
May 26 17:09:29 tarm kernel: [  443.432880] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
May 26 17:09:29 tarm kernel: [  443.439143] ehci_hcd 0000:00:1d.7: debug port 1
May 26 17:09:29 tarm kernel: [  443.439288] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
May 26 17:09:29 tarm kernel: [  443.439445] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb0004000
May 26 17:09:29 tarm kernel: [  443.453032] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
May 26 17:09:29 tarm kernel: [  443.453463] usb usb1: configuration #1 chosen from 1 choice
May 26 17:09:29 tarm kernel: [  443.459343] hub 1-0:1.0: USB hub found
May 26 17:09:29 tarm kernel: [  443.459486] hub 1-0:1.0: 8 ports detected
May 26 17:09:30 tarm kernel: [  443.574958] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
May 26 17:09:30 tarm kernel: [  443.574970] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:09:30 tarm kernel: [  443.574977] usb usb1: Product: EHCI Host Controller
May 26 17:09:30 tarm kernel: [  443.574983] usb usb1: Manufacturer: Linux 2.6.26-rc3 ehci_hcd
May 26 17:09:30 tarm kernel: [  443.574989] usb usb1: SerialNumber: 0000:00:1d.7
May 26 17:09:30 tarm kernel: [  443.590571] USB Universal Host Controller Interface driver v3.0
May 26 17:09:30 tarm kernel: [  443.590651] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:09:30 tarm kernel: [  443.590672] PCI: Setting latency timer of device 0000:00:1d.0 to 64
May 26 17:09:30 tarm kernel: [  443.590680] uhci_hcd 0000:00:1d.0: UHCI Host Controller
May 26 17:09:30 tarm kernel: [  443.590741] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
May 26 17:09:30 tarm kernel: [  443.590778] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
May 26 17:09:30 tarm kernel: [  443.591005] usb usb2: configuration #1 chosen from 1 choice
May 26 17:09:30 tarm kernel: [  443.591070] hub 2-0:1.0: USB hub found
May 26 17:09:30 tarm kernel: [  443.591084] hub 2-0:1.0: 2 ports detected
May 26 17:09:30 tarm kernel: [  443.625067] __ratelimit: 45 messages suppressed
May 26 17:09:30 tarm kernel: [  443.625263] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:09:30 tarm kernel: [  443.693056] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:09:30 tarm kernel: [  443.694024] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:09:30 tarm kernel: [  443.694113] usb usb2: Product: UHCI Host Controller
May 26 17:09:30 tarm kernel: [  443.694166] usb usb2: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:09:30 tarm kernel: [  443.694217] usb usb2: SerialNumber: 0000:00:1d.0
May 26 17:09:30 tarm kernel: [  443.694298] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
May 26 17:09:30 tarm kernel: [  443.694381] PCI: Setting latency timer of device 0000:00:1d.1 to 64
May 26 17:09:30 tarm kernel: [  443.694444] uhci_hcd 0000:00:1d.1: UHCI Host Controller
May 26 17:09:30 tarm kernel: [  443.694523] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
May 26 17:09:30 tarm kernel: [  443.694603] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
May 26 17:09:30 tarm kernel: [  443.694759] usb usb3: configuration #1 chosen from 1 choice
May 26 17:09:30 tarm kernel: [  443.694841] hub 3-0:1.0: USB hub found
May 26 17:09:30 tarm kernel: [  443.694897] hub 3-0:1.0: 2 ports detected
May 26 17:09:30 tarm kernel: [  443.773483] hub 1-0:1.0: unable to enumerate USB device on port 3
May 26 17:09:30 tarm kernel: [  443.797077] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:09:30 tarm kernel: [  443.797969] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:09:30 tarm kernel: [  443.798042] usb usb3: Product: UHCI Host Controller
May 26 17:09:30 tarm kernel: [  443.798094] usb usb3: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:09:30 tarm kernel: [  443.798144] usb usb3: SerialNumber: 0000:00:1d.1
May 26 17:09:30 tarm kernel: [  443.798225] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
May 26 17:09:30 tarm kernel: [  443.798307] PCI: Setting latency timer of device 0000:00:1d.2 to 64
May 26 17:09:30 tarm kernel: [  443.798371] uhci_hcd 0000:00:1d.2: UHCI Host Controller
May 26 17:09:30 tarm kernel: [  443.798449] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
May 26 17:09:30 tarm kernel: [  443.798528] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
May 26 17:09:30 tarm kernel: [  443.798683] usb usb4: configuration #1 chosen from 1 choice
May 26 17:09:30 tarm kernel: [  443.798766] hub 4-0:1.0: USB hub found
May 26 17:09:30 tarm kernel: [  443.798821] hub 4-0:1.0: 2 ports detected
May 26 17:09:30 tarm kernel: [  443.901079] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:09:30 tarm kernel: [  443.902034] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:09:30 tarm kernel: [  443.902109] usb usb4: Product: UHCI Host Controller
May 26 17:09:30 tarm kernel: [  443.902161] usb usb4: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:09:30 tarm kernel: [  443.902212] usb usb4: SerialNumber: 0000:00:1d.2
May 26 17:09:30 tarm kernel: [  443.902293] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
May 26 17:09:30 tarm kernel: [  443.902376] PCI: Setting latency timer of device 0000:00:1d.3 to 64
May 26 17:09:30 tarm kernel: [  443.902440] uhci_hcd 0000:00:1d.3: UHCI Host Controller
May 26 17:09:30 tarm kernel: [  443.902520] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
May 26 17:09:30 tarm kernel: [  443.902599] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
May 26 17:09:30 tarm kernel: [  443.902757] usb usb5: configuration #1 chosen from 1 choice
May 26 17:09:30 tarm kernel: [  443.902839] hub 5-0:1.0: USB hub found
May 26 17:09:30 tarm kernel: [  443.902895] hub 5-0:1.0: 2 ports detected
May 26 17:09:30 tarm kernel: [  444.006372] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:09:30 tarm kernel: [  444.006498] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:09:30 tarm kernel: [  444.006553] usb usb5: Product: UHCI Host Controller
May 26 17:09:30 tarm kernel: [  444.006604] usb usb5: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:09:30 tarm kernel: [  444.006654] usb usb5: SerialNumber: 0000:00:1d.3
May 26 17:09:30 tarm kernel: [  444.021071] hub 1-0:1.0: unable to enumerate USB device on port 5
May 26 17:09:30 tarm kernel: [  444.109142] [drm] Loading R300 Microcode
May 26 17:09:30 tarm kernel: [  444.261006] hub 1-0:1.0: unable to enumerate USB device on port 6
May 26 17:09:31 tarm kernel: [  444.500994] usb 3-1: new low speed USB device using uhci_hcd and address 2
May 26 17:09:31 tarm kernel: [  444.684966] usb 3-1: configuration #1 chosen from 1 choice
May 26 17:09:31 tarm kernel: [  444.711667] input: Logitech Trackball as /class/input/input16
May 26 17:09:31 tarm kernel: [  444.737121] input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.1-1
May 26 17:09:31 tarm kernel: [  444.737514] usb 3-1: New USB device found, idVendor=046d, idProduct=c404
May 26 17:09:31 tarm kernel: [  444.737592] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:09:31 tarm kernel: [  444.737663] usb 3-1: Product: Trackball
May 26 17:09:31 tarm kernel: [  444.737729] usb 3-1: Manufacturer: Logitech
May 26 17:09:31 tarm kernel: [  444.977628] usb 4-1: new full speed USB device using uhci_hcd and address 2
May 26 17:09:31 tarm kernel: [  445.159634] usb 4-1: configuration #1 chosen from 1 choice
May 26 17:09:31 tarm kernel: [  445.174640] usb 4-1: New USB device found, idVendor=0a5c, idProduct=2110
May 26 17:09:31 tarm kernel: [  445.175417] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:09:31 tarm kernel: [  445.175499] usb 4-1: Product: BCM2045B
May 26 17:09:31 tarm kernel: [  445.175565] usb 4-1: Manufacturer: Broadcom Corp
May 26 17:09:32 tarm kernel: [  445.413073] usb 4-2: new full speed USB device using uhci_hcd and address 3
May 26 17:09:32 tarm kernel: [  445.625078] __ratelimit: 13 messages suppressed
May 26 17:09:32 tarm kernel: [  445.625225] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:09:32 tarm kernel: [  445.708905] usb 4-2: configuration #1 chosen from 1 choice
May 26 17:09:32 tarm kernel: [  445.711683] usb 4-2: New USB device found, idVendor=0483, idProduct=2016
May 26 17:09:32 tarm kernel: [  445.711746] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:09:32 tarm kernel: [  445.711798] usb 4-2: Product: Biometric Coprocessor
May 26 17:09:32 tarm kernel: [  445.711847] usb 4-2: Manufacturer: STMicroelectronics
May 26 17:09:32 tarm kernel: [  445.782302] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
May 26 17:09:32 tarm kernel: [  445.783182] pan1: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
May 26 17:09:33 tarm kernel: [  447.252710] ADDRCONF(NETDEV_UP): eth0: link is not ready
May 26 17:09:39 tarm kernel: [  453.122676] ADDRCONF(NETDEV_UP): eth1: link is not ready
May 26 17:09:40 tarm kernel: [  453.625166] __ratelimit: 27 messages suppressed
May 26 17:09:40 tarm kernel: [  453.625375] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:09:40 tarm kernel: [  453.634525] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
May 26 17:09:41 tarm kernel: [  455.124997] __ratelimit: 13 messages suppressed
May 26 17:09:41 tarm kernel: [  455.125216] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:09:45 tarm kernel: [  459.186581] tun0: Disabled Privacy Extensions
May 26 17:09:46 tarm kernel: [  460.124986] __ratelimit: 20 messages suppressed
May 26 17:09:46 tarm kernel: [  460.125130] cpufreq-core: target for CPU 0: 628571 kHz, relation 0
May 26 17:09:50 tarm kernel: [  464.168981] eth1: no IPv6 routers present
May 26 17:09:53 tarm kernel: [  467.124998] __ratelimit: 6 messages suppressed
May 26 17:09:53 tarm kernel: [  467.125213] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:10:10 tarm kernel: [  483.625021] __ratelimit: 27 messages suppressed
May 26 17:10:10 tarm kernel: [  483.625257] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:10:10 tarm kernel: [  483.625402] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:10:10 tarm kernel: [  483.625537] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:10:10 tarm kernel: [  484.110265] ehci_hcd 0000:00:1d.7: remove, state 4
May 26 17:10:10 tarm kernel: [  484.110393] usb usb1: USB disconnect, address 1
May 26 17:10:10 tarm kernel: [  484.124969] ehci_hcd 0000:00:1d.7: USB bus 1 deregistered
May 26 17:10:10 tarm kernel: [  484.125225] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
May 26 17:10:10 tarm kernel: [  484.126042] uhci_hcd 0000:00:1d.3: remove, state 4
May 26 17:10:10 tarm kernel: [  484.126122] usb usb5: USB disconnect, address 1
May 26 17:10:10 tarm kernel: [  484.126371] uhci_hcd 0000:00:1d.3: USB bus 5 deregistered
May 26 17:10:10 tarm kernel: [  484.126458] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
May 26 17:10:10 tarm kernel: [  484.126525] uhci_hcd 0000:00:1d.2: remove, state 1
May 26 17:10:10 tarm kernel: [  484.126676] usb usb4: USB disconnect, address 1
May 26 17:10:10 tarm kernel: [  484.126877] usb 4-1: USB disconnect, address 2
May 26 17:10:11 tarm kernel: [  484.394116] usb 4-2: USB disconnect, address 3
May 26 17:10:11 tarm kernel: [  484.396494] uhci_hcd 0000:00:1d.2: USB bus 4 deregistered
May 26 17:10:11 tarm kernel: [  484.396532] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
May 26 17:10:11 tarm kernel: [  484.396544] uhci_hcd 0000:00:1d.1: remove, state 1
May 26 17:10:11 tarm kernel: [  484.396552] usb usb3: USB disconnect, address 1
May 26 17:10:11 tarm kernel: [  484.396554] usb 3-1: USB disconnect, address 2
May 26 17:10:11 tarm kernel: [  484.417428] uhci_hcd 0000:00:1d.1: USB bus 3 deregistered
May 26 17:10:11 tarm kernel: [  484.417622] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
May 26 17:10:11 tarm kernel: [  484.417707] uhci_hcd 0000:00:1d.0: remove, state 4
May 26 17:10:11 tarm kernel: [  484.417716] usb usb2: USB disconnect, address 1
May 26 17:10:11 tarm kernel: [  484.417891] uhci_hcd 0000:00:1d.0: USB bus 2 deregistered
May 26 17:10:11 tarm kernel: [  484.417918] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
May 26 17:10:11 tarm kernel: [  485.125025] __ratelimit: 11 messages suppressed
May 26 17:10:11 tarm kernel: [  485.125162] cpufreq-core: target for CPU 0: 457142 kHz, relation 0
May 26 17:10:13 tarm kernel: [  486.847805] PM: Syncing filesystems ... done.
May 26 17:10:27 tarm kernel: [  487.204289] Freezing user space processes ... (elapsed 0.04 seconds) done.
May 26 17:10:27 tarm kernel: [  487.251387] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
May 26 17:10:27 tarm kernel: [  487.251464] Suspending console(s)
May 26 17:10:27 tarm kernel: [  487.463985] sd 0:0:0:0: [sda] Synchronizing SCSI cache
May 26 17:10:27 tarm kernel: [  487.464051] sd 0:0:0:0: [sda] Stopping disk
May 26 17:10:27 tarm kernel: [  488.897745] nsc-ircc 00:09: disabled
May 26 17:10:27 tarm kernel: [  488.897934] eth1: Going into suspend...
May 26 17:10:27 tarm kernel: [  488.903804] ACPI: PCI interrupt for device 0000:14:02.0 disabled
May 26 17:10:27 tarm kernel: [  488.903816] ACPI handle has no context!
May 26 17:10:27 tarm kernel: [  488.918131] ACPI handle has no context!
May 26 17:10:27 tarm kernel: [  488.918160] ACPI: PCI interrupt for device 0000:14:00.2 disabled
May 26 17:10:27 tarm kernel: [  488.918170] ACPI handle has no context!
May 26 17:10:27 tarm kernel: [  488.938076] ACPI handle has no context!
May 26 17:10:27 tarm kernel: [  489.094601] ACPI handle has no context!
May 26 17:10:27 tarm kernel: [  489.313053] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
May 26 17:10:27 tarm kernel: [  489.332268] ACPI: Preparing to enter system sleep state S3
May 26 17:10:27 tarm kernel: [  489.344888] Extended CMOS year: 2000
May 26 17:10:27 tarm kernel: [  489.344888] Intel machine check architecture supported.
May 26 17:10:27 tarm kernel: [  489.344904] Intel machine check reporting enabled on CPU#0.
May 26 17:10:27 tarm kernel: [  489.344967] Back to C!
May 26 17:10:27 tarm kernel: [  489.344967] Extended CMOS year: 2000
May 26 17:10:27 tarm kernel: [  489.344967] Force enabled HPET at resume
May 26 17:10:27 tarm kernel: [  489.345152] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 17:10:27 tarm kernel: [  489.345155] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:10:27 tarm kernel: [  489.345157] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:10:27 tarm kernel: [  489.345160] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:10:27 tarm kernel: [  489.345164] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:10:27 tarm kernel: [  489.345167] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:10:27 tarm kernel: [  489.345170] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:10:27 tarm kernel: [  489.345173] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
May 26 17:10:27 tarm kernel: [  489.345175] cpufreq-core: governor: change or update limits
May 26 17:10:27 tarm kernel: [  489.345177] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 17:10:27 tarm kernel: [  489.408463] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100107, writing 100507)
May 26 17:10:27 tarm kernel: [  489.408463] PCI: Setting latency timer of device 0000:00:01.0 to 64
May 26 17:10:27 tarm kernel: [  489.425016] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
May 26 17:10:27 tarm kernel: [  489.425040] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:10:27 tarm kernel: [  489.425047] PCI: Setting latency timer of device 0000:00:1b.0 to 64
May 26 17:10:27 tarm kernel: [  489.481172] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
May 26 17:10:27 tarm kernel: [  489.481244] PCI: Setting latency timer of device 0000:00:1c.0 to 64
May 26 17:10:27 tarm kernel: [  489.481296] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
May 26 17:10:27 tarm kernel: [  489.481369] PCI: Setting latency timer of device 0000:00:1c.1 to 64
May 26 17:10:27 tarm kernel: [  489.481421] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
May 26 17:10:27 tarm kernel: [  489.481484] PCI: Setting latency timer of device 0000:00:1c.2 to 64
May 26 17:10:27 tarm kernel: [  489.481544] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507)
May 26 17:10:27 tarm kernel: [  489.481607] PCI: Setting latency timer of device 0000:00:1c.3 to 64
May 26 17:10:27 tarm kernel: [  489.481623] PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10b)
May 26 17:10:27 tarm kernel: [  489.481669] PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b)
May 26 17:10:27 tarm kernel: [  489.481724] PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30b)
May 26 17:10:27 tarm kernel: [  489.481770] PM: Writing back config space on device 0000:00:1d.3 at offset f (was 400, writing 40b)
May 26 17:10:27 tarm kernel: [  489.481832] PM: Writing back config space on device 0000:00:1d.7 at offset f (was 400, writing 40b)
May 26 17:10:27 tarm kernel: [  489.481859] PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing b0004000)
May 26 17:10:27 tarm kernel: [  489.481876] PM: Writing back config space on device 0000:00:1d.7 at offset 1 (was 2900000, writing 2900102)
May 26 17:10:27 tarm kernel: [  489.481976] PCI: Setting latency timer of device 0000:00:1e.0 to 64
May 26 17:10:27 tarm kernel: [  489.497044] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00005, writing 2b80005)
May 26 17:10:27 tarm kernel: [  489.497064] PCI: Setting latency timer of device 0000:00:1f.2 to 64
May 26 17:10:27 tarm kernel: [  489.499260] PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100103, writing 100107)
May 26 17:10:27 tarm kernel: [  489.499324] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:10:27 tarm kernel: [  489.499328] PCI: Setting latency timer of device 0000:01:00.0 to 64
May 26 17:10:27 tarm kernel: [  489.499365] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing fcf70000)
May 26 17:10:27 tarm kernel: [  489.499391] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 100106)
May 26 17:10:27 tarm kernel: [  489.837265] PM: Writing back config space on device 0000:14:00.1 at offset 4 (was 0, writing c0001000)
May 26 17:10:27 tarm kernel: [  489.837271] PM: Writing back config space on device 0000:14:00.1 at offset 3 (was 800000, writing 804000)
May 26 17:10:27 tarm kernel: [  489.837279] PM: Writing back config space on device 0000:14:00.1 at offset 1 (was 2100000, writing 2100106)
May 26 17:10:27 tarm kernel: [  489.845830] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
May 26 17:10:27 tarm kernel: [  489.845833] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
May 26 17:10:27 tarm kernel: [  489.849870] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 succeeded
May 26 17:10:27 tarm kernel: [  489.857873] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 succeeded
May 26 17:10:27 tarm kernel: [  489.882210] ata2.00: configured for UDMA/33
May 26 17:10:27 tarm kernel: [  489.892168] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[c0001000-c00017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
May 26 17:10:27 tarm kernel: [  489.917174] PM: Writing back config space on device 0000:14:00.2 at offset 4 (was 0, writing c0001800)
May 26 17:10:27 tarm kernel: [  489.917179] PM: Writing back config space on device 0000:14:00.2 at offset 3 (was 800000, writing 804000)
May 26 17:10:27 tarm kernel: [  489.917186] PM: Writing back config space on device 0000:14:00.2 at offset 1 (was 2100000, writing 2100106)
May 26 17:10:27 tarm kernel: [  489.917205] ACPI: PCI Interrupt 0000:14:00.2[C] -> GSI 18 (level, low) -> IRQ 18
May 26 17:10:27 tarm kernel: [  489.918248] eth1: Coming out of suspend...
May 26 17:10:27 tarm kernel: [  489.940100] ACPI: PCI Interrupt 0000:14:02.0[A] -> GSI 21 (level, low) -> IRQ 21
May 26 17:10:27 tarm kernel: [  489.940842] nsc-ircc 00:09: activated
May 26 17:10:27 tarm kernel: [  490.149682] __ratelimit: 37 messages suppressed
May 26 17:10:27 tarm kernel: [  490.149684] cpufreq-core: target for CPU 0: 1600000 kHz, relation 0
May 26 17:10:27 tarm kernel: [  490.892523] sd 0:0:0:0: [sda] Starting disk
May 26 17:10:27 tarm kernel: [  491.269696] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
May 26 17:10:27 tarm kernel: [  491.269703] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
May 26 17:10:27 tarm kernel: [  491.269710] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
May 26 17:10:27 tarm kernel: [  491.269716] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
May 26 17:10:27 tarm kernel: [  491.270140] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
May 26 17:10:27 tarm kernel: [  491.293674] ata1.00: configured for UDMA/100
May 26 17:10:27 tarm kernel: [  491.317651] ata1.00: configured for UDMA/100
May 26 17:10:27 tarm kernel: [  491.317658] ata1: EH complete
May 26 17:10:27 tarm kernel: [  491.317751] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
May 26 17:10:27 tarm kernel: [  491.317794] sd 0:0:0:0: [sda] Write Protect is off
May 26 17:10:27 tarm kernel: [  491.317799] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 26 17:10:27 tarm kernel: [  491.317872] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 26 17:10:27 tarm kernel: [  491.317943] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
May 26 17:10:27 tarm kernel: [  491.317983] sd 0:0:0:0: [sda] Write Protect is off
May 26 17:10:27 tarm kernel: [  491.317988] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 26 17:10:27 tarm kernel: [  491.318059] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 26 17:10:27 tarm kernel: [  494.045815] hdaps: initial latch check good (0x01).
May 26 17:10:27 tarm kernel: [  494.249506] Restarting tasks ... done.
May 26 17:10:28 tarm kernel: [  494.345881] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
May 26 17:10:28 tarm kernel: [  494.346144] PCI: Setting latency timer of device 0000:00:1d.7 to 64
May 26 17:10:28 tarm kernel: [  494.346286] ehci_hcd 0000:00:1d.7: EHCI Host Controller
May 26 17:10:28 tarm kernel: [  494.390051] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
May 26 17:10:28 tarm kernel: [  494.394635] ehci_hcd 0000:00:1d.7: debug port 1
May 26 17:10:28 tarm kernel: [  494.394772] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
May 26 17:10:28 tarm kernel: [  494.394926] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb0004000
May 26 17:10:28 tarm kernel: [  494.409018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
May 26 17:10:28 tarm kernel: [  494.409522] usb usb1: configuration #1 chosen from 1 choice
May 26 17:10:28 tarm kernel: [  494.409896] hub 1-0:1.0: USB hub found
May 26 17:10:28 tarm kernel: [  494.410027] hub 1-0:1.0: 8 ports detected
May 26 17:10:28 tarm kernel: [  494.513151] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
May 26 17:10:28 tarm kernel: [  494.513392] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:10:28 tarm kernel: [  494.513735] usb usb1: Product: EHCI Host Controller
May 26 17:10:28 tarm kernel: [  494.513858] usb usb1: Manufacturer: Linux 2.6.26-rc3 ehci_hcd
May 26 17:10:28 tarm kernel: [  494.513973] usb usb1: SerialNumber: 0000:00:1d.7
May 26 17:10:28 tarm kernel: [  494.524824] USB Universal Host Controller Interface driver v3.0
May 26 17:10:28 tarm kernel: [  494.524907] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:10:28 tarm kernel: [  494.524927] PCI: Setting latency timer of device 0000:00:1d.0 to 64
May 26 17:10:28 tarm kernel: [  494.524935] uhci_hcd 0000:00:1d.0: UHCI Host Controller
May 26 17:10:28 tarm kernel: [  494.525357] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
May 26 17:10:28 tarm kernel: [  494.525398] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
May 26 17:10:28 tarm kernel: [  494.525629] usb usb2: configuration #1 chosen from 1 choice
May 26 17:10:28 tarm kernel: [  494.525695] hub 2-0:1.0: USB hub found
May 26 17:10:28 tarm kernel: [  494.525709] hub 2-0:1.0: 2 ports detected
May 26 17:10:28 tarm kernel: [  494.629076] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:10:28 tarm kernel: [  494.629218] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:10:28 tarm kernel: [  494.629277] usb usb2: Product: UHCI Host Controller
May 26 17:10:28 tarm kernel: [  494.629330] usb usb2: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:10:28 tarm kernel: [  494.629394] usb usb2: SerialNumber: 0000:00:1d.0
May 26 17:10:28 tarm kernel: [  494.629476] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
May 26 17:10:28 tarm kernel: [  494.629564] PCI: Setting latency timer of device 0000:00:1d.1 to 64
May 26 17:10:28 tarm kernel: [  494.629629] uhci_hcd 0000:00:1d.1: UHCI Host Controller
May 26 17:10:28 tarm kernel: [  494.629704] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
May 26 17:10:28 tarm kernel: [  494.629783] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
May 26 17:10:28 tarm kernel: [  494.629939] usb usb3: configuration #1 chosen from 1 choice
May 26 17:10:28 tarm kernel: [  494.630022] hub 3-0:1.0: USB hub found
May 26 17:10:28 tarm kernel: [  494.630079] hub 3-0:1.0: 2 ports detected
May 26 17:10:28 tarm kernel: [  494.719563] hub 1-0:1.0: unable to enumerate USB device on port 3
May 26 17:10:28 tarm kernel: [  494.733117] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:10:28 tarm kernel: [  494.734030] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:10:28 tarm kernel: [  494.734104] usb usb3: Product: UHCI Host Controller
May 26 17:10:28 tarm kernel: [  494.734156] usb usb3: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:10:28 tarm kernel: [  494.734208] usb usb3: SerialNumber: 0000:00:1d.1
May 26 17:10:28 tarm kernel: [  494.734290] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
May 26 17:10:28 tarm kernel: [  494.734373] PCI: Setting latency timer of device 0000:00:1d.2 to 64
May 26 17:10:28 tarm kernel: [  494.734437] uhci_hcd 0000:00:1d.2: UHCI Host Controller
May 26 17:10:28 tarm kernel: [  494.734517] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
May 26 17:10:28 tarm kernel: [  494.734718] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
May 26 17:10:28 tarm kernel: [  494.734878] usb usb4: configuration #1 chosen from 1 choice
May 26 17:10:28 tarm kernel: [  494.734962] hub 4-0:1.0: USB hub found
May 26 17:10:28 tarm kernel: [  494.735018] hub 4-0:1.0: 2 ports detected
May 26 17:10:28 tarm kernel: [  494.837089] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:10:28 tarm kernel: [  494.837223] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:10:28 tarm kernel: [  494.837283] usb usb4: Product: UHCI Host Controller
May 26 17:10:28 tarm kernel: [  494.837338] usb usb4: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:10:28 tarm kernel: [  494.837402] usb usb4: SerialNumber: 0000:00:1d.2
May 26 17:10:28 tarm kernel: [  494.837485] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
May 26 17:10:28 tarm kernel: [  494.837578] PCI: Setting latency timer of device 0000:00:1d.3 to 64
May 26 17:10:28 tarm kernel: [  494.837645] uhci_hcd 0000:00:1d.3: UHCI Host Controller
May 26 17:10:28 tarm kernel: [  494.837727] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
May 26 17:10:28 tarm kernel: [  494.837811] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
May 26 17:10:28 tarm kernel: [  494.837975] usb usb5: configuration #1 chosen from 1 choice
May 26 17:10:28 tarm kernel: [  494.838064] hub 5-0:1.0: USB hub found
May 26 17:10:28 tarm kernel: [  494.838125] hub 5-0:1.0: 2 ports detected
May 26 17:10:28 tarm kernel: [  494.941187] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:10:28 tarm kernel: [  494.942471] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:10:28 tarm kernel: [  494.942549] usb usb5: Product: UHCI Host Controller
May 26 17:10:28 tarm kernel: [  494.942603] usb usb5: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:10:28 tarm kernel: [  494.942655] usb usb5: SerialNumber: 0000:00:1d.3
May 26 17:10:28 tarm kernel: [  494.957200] hub 1-0:1.0: unable to enumerate USB device on port 5
May 26 17:10:28 tarm kernel: [  495.067809] [drm] Loading R300 Microcode
May 26 17:10:28 tarm kernel: [  495.197029] hub 1-0:1.0: unable to enumerate USB device on port 6
May 26 17:10:29 tarm kernel: [  495.437104] usb 3-1: new low speed USB device using uhci_hcd and address 2
May 26 17:10:29 tarm kernel: [  495.617733] usb 3-1: configuration #1 chosen from 1 choice
May 26 17:10:29 tarm kernel: [  495.624999] __ratelimit: 28 messages suppressed
May 26 17:10:29 tarm kernel: [  495.625107] cpufreq-core: target for CPU 0: 914285 kHz, relation 0
May 26 17:10:29 tarm kernel: [  495.641054] input: Logitech Trackball as /class/input/input17
May 26 17:10:29 tarm kernel: [  495.669040] input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.1-1
May 26 17:10:29 tarm kernel: [  495.669349] usb 3-1: New USB device found, idVendor=046d, idProduct=c404
May 26 17:10:29 tarm kernel: [  495.669442] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:10:29 tarm kernel: [  495.669526] usb 3-1: Product: Trackball
May 26 17:10:29 tarm kernel: [  495.669605] usb 3-1: Manufacturer: Logitech
May 26 17:10:29 tarm kernel: [  495.921022] usb 4-1: new full speed USB device using uhci_hcd and address 2
May 26 17:10:30 tarm kernel: [  496.106111] usb 4-1: configuration #1 chosen from 1 choice
May 26 17:10:30 tarm kernel: [  496.113535] usb 4-1: New USB device found, idVendor=0a5c, idProduct=2110
May 26 17:10:30 tarm kernel: [  496.113741] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:10:30 tarm kernel: [  496.113833] usb 4-1: Product: BCM2045B
May 26 17:10:30 tarm kernel: [  496.113913] usb 4-1: Manufacturer: Broadcom Corp
May 26 17:10:30 tarm kernel: [  496.353025] usb 4-2: new full speed USB device using uhci_hcd and address 3
May 26 17:10:30 tarm kernel: [  496.391231] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
May 26 17:10:30 tarm kernel: [  496.398832] pan1: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
May 26 17:10:30 tarm kernel: [  496.528100] usb 4-2: configuration #1 chosen from 1 choice
May 26 17:10:30 tarm kernel: [  496.535144] usb 4-2: New USB device found, idVendor=0483, idProduct=2016
May 26 17:10:30 tarm kernel: [  496.535317] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:10:30 tarm kernel: [  496.535371] usb 4-2: Product: Biometric Coprocessor
May 26 17:10:30 tarm kernel: [  496.535420] usb 4-2: Manufacturer: STMicroelectronics
May 26 17:10:32 tarm kernel: [  498.837639] ADDRCONF(NETDEV_UP): eth0: link is not ready
May 26 17:10:37 tarm kernel: [  503.625008] __ratelimit: 41 messages suppressed
May 26 17:10:37 tarm kernel: [  503.625255] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:10:38 tarm kernel: [  504.706644] ADDRCONF(NETDEV_UP): eth1: link is not ready
May 26 17:10:39 tarm kernel: [  505.125057] __ratelimit: 13 messages suppressed
May 26 17:10:39 tarm kernel: [  505.125282] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:10:39 tarm kernel: [  505.624109] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
May 26 17:10:42 tarm kernel: [  508.300698] tun0: Disabled Privacy Extensions
May 26 17:10:49 tarm kernel: [  515.125001] __ratelimit: 55 messages suppressed
May 26 17:10:49 tarm kernel: [  515.125216] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:10:49 tarm kernel: [  515.125382] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:10:50 tarm kernel: [  516.492981] eth1: no IPv6 routers present
May 26 17:10:54 tarm kernel: [  520.625015] __ratelimit: 33 messages suppressed
May 26 17:10:54 tarm kernel: [  520.625253] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:11:01 tarm kernel: [  527.625011] __ratelimit: 13 messages suppressed
May 26 17:11:01 tarm kernel: [  527.625247] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:11:07 tarm kernel: [  533.125129] __ratelimit: 13 messages suppressed
May 26 17:11:07 tarm kernel: [  533.125349] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:11:18 tarm kernel: [  544.125011] __ratelimit: 13 messages suppressed
May 26 17:11:18 tarm kernel: [  544.125242] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:11:18 tarm kernel: [  544.125383] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:11:19 tarm kernel: [  545.124987] __ratelimit: 5 messages suppressed
May 26 17:11:19 tarm kernel: [  545.125125] cpufreq-core: target for CPU 0: 57142 kHz, relation 0
May 26 17:11:42 tarm kernel: [  568.125009] __ratelimit: 6 messages suppressed
May 26 17:11:42 tarm kernel: [  568.125255] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:11:42 tarm kernel: [  568.125398] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:11:42 tarm kernel: [  568.125530] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:11:42 tarm kernel: [  568.125667] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:12:02 tarm kernel: [  588.125047] __ratelimit: 10 messages suppressed
May 26 17:12:02 tarm kernel: [  588.125294] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:12:02 tarm kernel: [  588.125438] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:12:02 tarm kernel: [  588.125571] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:12:02 tarm kernel: [  588.125708] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:12:07 tarm kernel: [  593.625003] __ratelimit: 17 messages suppressed
May 26 17:12:07 tarm kernel: [  593.625231] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:12:09 tarm kernel: [  595.624986] __ratelimit: 20 messages suppressed
May 26 17:12:09 tarm kernel: [  595.625140] cpufreq-core: target for CPU 0: 1600000 kHz, relation 0
May 26 17:12:14 tarm kernel: [  600.124987] __ratelimit: 25 messages suppressed
May 26 17:12:14 tarm kernel: [  600.125128] cpufreq-core: target for CPU 0: 342857 kHz, relation 0
May 26 17:12:21 tarm kernel: [  607.129339] __ratelimit: 41 messages suppressed
May 26 17:12:21 tarm kernel: [  607.129571] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:12:24 tarm kernel: [  610.125052] __ratelimit: 13 messages suppressed
May 26 17:12:24 tarm kernel: [  610.125367] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:12:30 tarm kernel: [  616.125014] __ratelimit: 13 messages suppressed
May 26 17:12:30 tarm kernel: [  616.125266] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:12:42 tarm kernel: [  628.625019] __ratelimit: 18 messages suppressed
May 26 17:12:42 tarm kernel: [  628.625243] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:12:42 tarm kernel: [  628.625382] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:12:54 tarm kernel: [  640.625537] __ratelimit: 12 messages suppressed
May 26 17:12:54 tarm kernel: [  640.625756] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:12:54 tarm kernel: [  640.625900] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:12:54 tarm kernel: [  640.626068] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:13:01 tarm kernel: [  647.125036] __ratelimit: 25 messages suppressed
May 26 17:13:01 tarm kernel: [  647.125255] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:13:28 tarm kernel: [  674.625023] __ratelimit: 20 messages suppressed
May 26 17:13:28 tarm kernel: [  674.625347] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:13:28 tarm kernel: [  674.625495] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:13:28 tarm kernel: [  674.625652] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:13:28 tarm kernel: [  674.625796] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:13:28 tarm kernel: [  674.625930] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:13:29 tarm kernel: [  675.124987] __ratelimit: 2 messages suppressed
May 26 17:13:29 tarm kernel: [  675.125127] cpufreq-core: target for CPU 0: 628571 kHz, relation 0
May 26 17:13:33 tarm kernel: [  679.037672] ehci_hcd 0000:00:1d.7: remove, state 4
May 26 17:13:33 tarm kernel: [  679.037687] usb usb1: USB disconnect, address 1
May 26 17:13:33 tarm kernel: [  679.066194] ehci_hcd 0000:00:1d.7: USB bus 1 deregistered
May 26 17:13:33 tarm kernel: [  679.066253] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
May 26 17:13:33 tarm kernel: [  679.067034] uhci_hcd 0000:00:1d.3: remove, state 4
May 26 17:13:33 tarm kernel: [  679.067044] usb usb5: USB disconnect, address 1
May 26 17:13:33 tarm kernel: [  679.067236] uhci_hcd 0000:00:1d.3: USB bus 5 deregistered
May 26 17:13:33 tarm kernel: [  679.067265] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
May 26 17:13:33 tarm kernel: [  679.067275] uhci_hcd 0000:00:1d.2: remove, state 1
May 26 17:13:33 tarm kernel: [  679.067283] usb usb4: USB disconnect, address 1
May 26 17:13:33 tarm kernel: [  679.067285] usb 4-1: USB disconnect, address 2
May 26 17:13:33 tarm kernel: [  679.326093] usb 4-2: USB disconnect, address 3
May 26 17:13:33 tarm kernel: [  679.328506] uhci_hcd 0000:00:1d.2: USB bus 4 deregistered
May 26 17:13:33 tarm kernel: [  679.328544] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
May 26 17:13:33 tarm kernel: [  679.328554] uhci_hcd 0000:00:1d.1: remove, state 1
May 26 17:13:33 tarm kernel: [  679.328562] usb usb3: USB disconnect, address 1
May 26 17:13:33 tarm kernel: [  679.328564] usb 3-1: USB disconnect, address 2
May 26 17:13:33 tarm kernel: [  679.349431] uhci_hcd 0000:00:1d.1: USB bus 3 deregistered
May 26 17:13:33 tarm kernel: [  679.349619] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
May 26 17:13:33 tarm kernel: [  679.349704] uhci_hcd 0000:00:1d.0: remove, state 4
May 26 17:13:33 tarm kernel: [  679.349714] usb usb2: USB disconnect, address 1
May 26 17:13:33 tarm kernel: [  679.349889] uhci_hcd 0000:00:1d.0: USB bus 2 deregistered
May 26 17:13:33 tarm kernel: [  679.349916] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
May 26 17:13:34 tarm kernel: [  680.125052] __ratelimit: 18 messages suppressed
May 26 17:13:34 tarm kernel: [  680.125198] cpufreq-core: target for CPU 0: 1828571 kHz, relation 0
May 26 17:13:35 tarm kernel: [  681.499633] PM: Syncing filesystems ... done.
May 26 17:13:47 tarm kernel: [  681.613159] Freezing user space processes ... (elapsed 0.00 seconds) done.
May 26 17:13:47 tarm kernel: [  681.614674] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
May 26 17:13:47 tarm kernel: [  681.614758] Suspending console(s)
May 26 17:13:47 tarm kernel: [  681.835093] sd 0:0:0:0: [sda] Synchronizing SCSI cache
May 26 17:13:47 tarm kernel: [  681.844214] sd 0:0:0:0: [sda] Stopping disk
May 26 17:13:47 tarm kernel: [  683.265808] nsc-ircc 00:09: disabled
May 26 17:13:47 tarm kernel: [  683.265997] eth1: Going into suspend...
May 26 17:13:47 tarm kernel: [  683.270843] ACPI: PCI interrupt for device 0000:14:02.0 disabled
May 26 17:13:47 tarm kernel: [  683.270855] ACPI handle has no context!
May 26 17:13:47 tarm kernel: [  683.286131] ACPI handle has no context!
May 26 17:13:47 tarm kernel: [  683.286160] ACPI: PCI interrupt for device 0000:14:00.2 disabled
May 26 17:13:47 tarm kernel: [  683.286170] ACPI handle has no context!
May 26 17:13:47 tarm kernel: [  683.306077] ACPI handle has no context!
May 26 17:13:47 tarm kernel: [  683.462597] ACPI handle has no context!
May 26 17:13:47 tarm kernel: [  683.681053] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
May 26 17:13:47 tarm kernel: [  683.700321] ACPI: Preparing to enter system sleep state S3
May 26 17:13:47 tarm kernel: [  683.712644] Extended CMOS year: 2000
May 26 17:13:47 tarm kernel: [  683.712644] Intel machine check architecture supported.
May 26 17:13:47 tarm kernel: [  683.712660] Intel machine check reporting enabled on CPU#0.
May 26 17:13:47 tarm kernel: [  683.712761] Back to C!
May 26 17:13:47 tarm kernel: [  683.712967] Extended CMOS year: 2000
May 26 17:13:47 tarm kernel: [  683.712967] Force enabled HPET at resume
May 26 17:13:47 tarm kernel: [  683.712967] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 17:13:47 tarm kernel: [  683.712967] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:13:47 tarm kernel: [  683.712967] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:13:47 tarm kernel: [  683.712967] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:13:47 tarm kernel: [  683.712967] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:13:47 tarm kernel: [  683.712967] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:13:47 tarm kernel: [  683.712967] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:13:47 tarm kernel: [  683.712967] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
May 26 17:13:47 tarm kernel: [  683.712967] cpufreq-core: governor: change or update limits
May 26 17:13:47 tarm kernel: [  683.712967] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 17:13:47 tarm kernel: [  683.762614] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100107, writing 100507)
May 26 17:13:47 tarm kernel: [  683.762614] PCI: Setting latency timer of device 0000:00:01.0 to 64
May 26 17:13:47 tarm kernel: [  683.789051] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
May 26 17:13:47 tarm kernel: [  683.789074] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:13:47 tarm kernel: [  683.789081] PCI: Setting latency timer of device 0000:00:1b.0 to 64
May 26 17:13:47 tarm kernel: [  683.845176] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
May 26 17:13:47 tarm kernel: [  683.845248] PCI: Setting latency timer of device 0000:00:1c.0 to 64
May 26 17:13:47 tarm kernel: [  683.845299] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
May 26 17:13:47 tarm kernel: [  683.845363] PCI: Setting latency timer of device 0000:00:1c.1 to 64
May 26 17:13:47 tarm kernel: [  683.845423] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
May 26 17:13:47 tarm kernel: [  683.845487] PCI: Setting latency timer of device 0000:00:1c.2 to 64
May 26 17:13:47 tarm kernel: [  683.845548] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507)
May 26 17:13:47 tarm kernel: [  683.845611] PCI: Setting latency timer of device 0000:00:1c.3 to 64
May 26 17:13:47 tarm kernel: [  683.845627] PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10b)
May 26 17:13:47 tarm kernel: [  683.845673] PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b)
May 26 17:13:47 tarm kernel: [  683.845728] PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30b)
May 26 17:13:47 tarm kernel: [  683.845774] PM: Writing back config space on device 0000:00:1d.3 at offset f (was 400, writing 40b)
May 26 17:13:47 tarm kernel: [  683.845836] PM: Writing back config space on device 0000:00:1d.7 at offset f (was 400, writing 40b)
May 26 17:13:47 tarm kernel: [  683.845873] PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing b0004000)
May 26 17:13:47 tarm kernel: [  683.845881] PM: Writing back config space on device 0000:00:1d.7 at offset 1 (was 2900000, writing 2900102)
May 26 17:13:47 tarm kernel: [  683.845980] PCI: Setting latency timer of device 0000:00:1e.0 to 64
May 26 17:13:47 tarm kernel: [  683.861043] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00005, writing 2b80005)
May 26 17:13:47 tarm kernel: [  683.861062] PCI: Setting latency timer of device 0000:00:1f.2 to 64
May 26 17:13:47 tarm kernel: [  683.863259] PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100103, writing 100107)
May 26 17:13:47 tarm kernel: [  683.863323] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:13:47 tarm kernel: [  683.863327] PCI: Setting latency timer of device 0000:01:00.0 to 64
May 26 17:13:47 tarm kernel: [  683.863365] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing fcff0000)
May 26 17:13:47 tarm kernel: [  683.863391] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 100106)
May 26 17:13:47 tarm kernel: [  684.201259] PM: Writing back config space on device 0000:14:00.1 at offset 4 (was 0, writing c0001000)
May 26 17:13:47 tarm kernel: [  684.201265] PM: Writing back config space on device 0000:14:00.1 at offset 3 (was 800000, writing 804000)
May 26 17:13:47 tarm kernel: [  684.201273] PM: Writing back config space on device 0000:14:00.1 at offset 1 (was 2100000, writing 2100106)
May 26 17:13:47 tarm kernel: [  684.213807] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
May 26 17:13:47 tarm kernel: [  684.213809] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
May 26 17:13:47 tarm kernel: [  684.221813] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 succeeded
May 26 17:13:47 tarm kernel: [  684.229816] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 succeeded
May 26 17:13:47 tarm kernel: [  684.254164] ata2.00: configured for UDMA/33
May 26 17:13:47 tarm kernel: [  684.256181] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[c0001000-c00017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
May 26 17:13:47 tarm kernel: [  684.281188] PM: Writing back config space on device 0000:14:00.2 at offset 4 (was 0, writing c0001800)
May 26 17:13:47 tarm kernel: [  684.281193] PM: Writing back config space on device 0000:14:00.2 at offset 3 (was 800000, writing 804000)
May 26 17:13:47 tarm kernel: [  684.281200] PM: Writing back config space on device 0000:14:00.2 at offset 1 (was 2100000, writing 2100106)
May 26 17:13:47 tarm kernel: [  684.281219] ACPI: PCI Interrupt 0000:14:00.2[C] -> GSI 18 (level, low) -> IRQ 18
May 26 17:13:47 tarm kernel: [  684.282264] eth1: Coming out of suspend...
May 26 17:13:47 tarm kernel: [  684.304115] ACPI: PCI Interrupt 0000:14:02.0[A] -> GSI 21 (level, low) -> IRQ 21
May 26 17:13:47 tarm kernel: [  684.304856] nsc-ircc 00:09: activated
May 26 17:13:47 tarm kernel: [  685.125021] __ratelimit: 36 messages suppressed
May 26 17:13:47 tarm kernel: [  685.125024] cpufreq-core: target for CPU 0: 1005714 kHz, relation 0
May 26 17:13:47 tarm kernel: [  685.240365] sd 0:0:0:0: [sda] Starting disk
May 26 17:13:47 tarm kernel: [  685.361681] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
May 26 17:13:47 tarm kernel: [  685.361686] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
May 26 17:13:47 tarm kernel: [  685.361691] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
May 26 17:13:47 tarm kernel: [  685.361696] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
May 26 17:13:47 tarm kernel: [  685.362115] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
May 26 17:13:47 tarm kernel: [  685.385653] ata1.00: configured for UDMA/100
May 26 17:13:47 tarm kernel: [  685.409640] ata1.00: configured for UDMA/100
May 26 17:13:47 tarm kernel: [  685.409645] ata1: EH complete
May 26 17:13:47 tarm kernel: [  685.409720] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
May 26 17:13:47 tarm kernel: [  685.409754] sd 0:0:0:0: [sda] Write Protect is off
May 26 17:13:47 tarm kernel: [  685.409759] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 26 17:13:47 tarm kernel: [  685.409816] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 26 17:13:47 tarm kernel: [  685.409873] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
May 26 17:13:47 tarm kernel: [  685.409904] sd 0:0:0:0: [sda] Write Protect is off
May 26 17:13:47 tarm kernel: [  685.409908] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 26 17:13:47 tarm kernel: [  685.409964] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 26 17:13:47 tarm kernel: [  688.101026] hdaps: initial latch check good (0x01).
May 26 17:13:47 tarm kernel: [  688.509522] Restarting tasks ... done.
May 26 17:13:47 tarm kernel: [  688.613227] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
May 26 17:13:47 tarm kernel: [  688.613491] PCI: Setting latency timer of device 0000:00:1d.7 to 64
May 26 17:13:47 tarm kernel: [  688.613633] ehci_hcd 0000:00:1d.7: EHCI Host Controller
May 26 17:13:47 tarm kernel: [  688.662871] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
May 26 17:13:47 tarm kernel: [  688.667009] ehci_hcd 0000:00:1d.7: debug port 1
May 26 17:13:47 tarm kernel: [  688.669045] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
May 26 17:13:47 tarm kernel: [  688.669225] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb0004000
May 26 17:13:47 tarm kernel: [  688.685034] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
May 26 17:13:47 tarm kernel: [  688.685481] usb usb1: configuration #1 chosen from 1 choice
May 26 17:13:47 tarm kernel: [  688.691355] hub 1-0:1.0: USB hub found
May 26 17:13:47 tarm kernel: [  688.691495] hub 1-0:1.0: 8 ports detected
May 26 17:13:47 tarm kernel: [  688.805182] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
May 26 17:13:47 tarm kernel: [  688.805194] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:13:47 tarm kernel: [  688.805201] usb usb1: Product: EHCI Host Controller
May 26 17:13:47 tarm kernel: [  688.805207] usb usb1: Manufacturer: Linux 2.6.26-rc3 ehci_hcd
May 26 17:13:47 tarm kernel: [  688.805213] usb usb1: SerialNumber: 0000:00:1d.7
May 26 17:13:47 tarm kernel: [  688.816077] USB Universal Host Controller Interface driver v3.0
May 26 17:13:47 tarm kernel: [  688.816157] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
May 26 17:13:47 tarm kernel: [  688.816177] PCI: Setting latency timer of device 0000:00:1d.0 to 64
May 26 17:13:47 tarm kernel: [  688.816185] uhci_hcd 0000:00:1d.0: UHCI Host Controller
May 26 17:13:47 tarm kernel: [  688.816252] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
May 26 17:13:47 tarm kernel: [  688.816288] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
May 26 17:13:47 tarm kernel: [  688.816514] usb usb2: configuration #1 chosen from 1 choice
May 26 17:13:47 tarm kernel: [  688.816578] hub 2-0:1.0: USB hub found
May 26 17:13:47 tarm kernel: [  688.816592] hub 2-0:1.0: 2 ports detected
May 26 17:13:47 tarm kernel: [  688.917139] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:13:47 tarm kernel: [  688.917780] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:13:47 tarm kernel: [  688.917792] usb usb2: Product: UHCI Host Controller
May 26 17:13:47 tarm kernel: [  688.917798] usb usb2: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:13:47 tarm kernel: [  688.917803] usb usb2: SerialNumber: 0000:00:1d.0
May 26 17:13:47 tarm kernel: [  688.917849] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
May 26 17:13:47 tarm kernel: [  688.917868] PCI: Setting latency timer of device 0000:00:1d.1 to 64
May 26 17:13:47 tarm kernel: [  688.917876] uhci_hcd 0000:00:1d.1: UHCI Host Controller
May 26 17:13:47 tarm kernel: [  688.917936] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
May 26 17:13:47 tarm kernel: [  688.917972] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
May 26 17:13:47 tarm kernel: [  688.918197] usb usb3: configuration #1 chosen from 1 choice
May 26 17:13:47 tarm kernel: [  688.918263] hub 3-0:1.0: USB hub found
May 26 17:13:47 tarm kernel: [  688.918277] hub 3-0:1.0: 2 ports detected
May 26 17:13:48 tarm kernel: [  689.001814] hub 1-0:1.0: unable to enumerate USB device on port 3
May 26 17:13:48 tarm kernel: [  689.021284] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:13:48 tarm kernel: [  689.021491] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:13:48 tarm kernel: [  689.021502] usb usb3: Product: UHCI Host Controller
May 26 17:13:48 tarm kernel: [  689.021507] usb usb3: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:13:48 tarm kernel: [  689.021513] usb usb3: SerialNumber: 0000:00:1d.1
May 26 17:13:48 tarm kernel: [  689.021559] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
May 26 17:13:48 tarm kernel: [  689.021578] PCI: Setting latency timer of device 0000:00:1d.2 to 64
May 26 17:13:48 tarm kernel: [  689.021586] uhci_hcd 0000:00:1d.2: UHCI Host Controller
May 26 17:13:48 tarm kernel: [  689.021641] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
May 26 17:13:48 tarm kernel: [  689.021675] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
May 26 17:13:48 tarm kernel: [  689.021905] usb usb4: configuration #1 chosen from 1 choice
May 26 17:13:48 tarm kernel: [  689.021971] hub 4-0:1.0: USB hub found
May 26 17:13:48 tarm kernel: [  689.021984] hub 4-0:1.0: 2 ports detected
May 26 17:13:48 tarm kernel: [  689.125223] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:13:48 tarm kernel: [  689.125235] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:13:48 tarm kernel: [  689.125242] usb usb4: Product: UHCI Host Controller
May 26 17:13:48 tarm kernel: [  689.125248] usb usb4: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:13:48 tarm kernel: [  689.125254] usb usb4: SerialNumber: 0000:00:1d.2
May 26 17:13:48 tarm kernel: [  689.125297] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
May 26 17:13:48 tarm kernel: [  689.125317] PCI: Setting latency timer of device 0000:00:1d.3 to 64
May 26 17:13:48 tarm kernel: [  689.125324] uhci_hcd 0000:00:1d.3: UHCI Host Controller
May 26 17:13:48 tarm kernel: [  689.125377] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
May 26 17:13:48 tarm kernel: [  689.125412] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
May 26 17:13:48 tarm kernel: [  689.125642] usb usb5: configuration #1 chosen from 1 choice
May 26 17:13:48 tarm kernel: [  689.125708] hub 5-0:1.0: USB hub found
May 26 17:13:48 tarm kernel: [  689.125722] hub 5-0:1.0: 2 ports detected
May 26 17:13:48 tarm kernel: [  689.229073] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
May 26 17:13:48 tarm kernel: [  689.229218] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 26 17:13:48 tarm kernel: [  689.229275] usb usb5: Product: UHCI Host Controller
May 26 17:13:48 tarm kernel: [  689.229328] usb usb5: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
May 26 17:13:48 tarm kernel: [  689.229380] usb usb5: SerialNumber: 0000:00:1d.3
May 26 17:13:48 tarm kernel: [  689.241062] hub 1-0:1.0: unable to enumerate USB device on port 5
May 26 17:13:48 tarm kernel: [  689.335824] [drm] Loading R300 Microcode
May 26 17:13:48 tarm kernel: [  689.481010] hub 1-0:1.0: unable to enumerate USB device on port 6
May 26 17:13:48 tarm kernel: [  689.721001] usb 3-1: new low speed USB device using uhci_hcd and address 2
May 26 17:13:48 tarm kernel: [  689.900933] usb 3-1: configuration #1 chosen from 1 choice
May 26 17:13:48 tarm kernel: [  689.929009] input: Logitech Trackball as /class/input/input18
May 26 17:13:48 tarm kernel: [  689.957156] input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.1-1
May 26 17:13:48 tarm kernel: [  689.957408] usb 3-1: New USB device found, idVendor=046d, idProduct=c404
May 26 17:13:48 tarm kernel: [  689.957465] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:13:48 tarm kernel: [  689.957517] usb 3-1: Product: Trackball
May 26 17:13:48 tarm kernel: [  689.957566] usb 3-1: Manufacturer: Logitech
May 26 17:13:49 tarm kernel: [  690.197096] usb 4-1: new full speed USB device using uhci_hcd and address 2
May 26 17:13:49 tarm kernel: [  690.374479] usb 4-1: configuration #1 chosen from 1 choice
May 26 17:13:49 tarm kernel: [  690.380777] usb 4-1: New USB device found, idVendor=0a5c, idProduct=2110
May 26 17:13:49 tarm kernel: [  690.381156] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:13:49 tarm kernel: [  690.381228] usb 4-1: Product: BCM2045B
May 26 17:13:49 tarm kernel: [  690.381279] usb 4-1: Manufacturer: Broadcom Corp
May 26 17:13:49 tarm kernel: [  690.621038] usb 4-2: new full speed USB device using uhci_hcd and address 3
May 26 17:13:49 tarm kernel: [  690.642216] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
May 26 17:13:49 tarm kernel: [  690.649778] pan1: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
May 26 17:13:49 tarm kernel: [  690.791941] usb 4-2: configuration #1 chosen from 1 choice
May 26 17:13:49 tarm kernel: [  690.799042] usb 4-2: New USB device found, idVendor=0483, idProduct=2016
May 26 17:13:49 tarm kernel: [  690.799147] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 26 17:13:49 tarm kernel: [  690.799217] usb 4-2: Product: Biometric Coprocessor
May 26 17:13:49 tarm kernel: [  690.799267] usb 4-2: Manufacturer: STMicroelectronics
May 26 17:13:51 tarm kernel: [  692.125168] __ratelimit: 20 messages suppressed
May 26 17:13:51 tarm kernel: [  692.125309] cpufreq-core: target for CPU 0: 400000 kHz, relation 0
May 26 17:13:51 tarm kernel: [  692.821450] ADDRCONF(NETDEV_UP): eth0: link is not ready
May 26 17:13:54 tarm kernel: [  695.124991] __ratelimit: 13 messages suppressed
May 26 17:13:54 tarm kernel: [  695.125126] cpufreq-core: target for CPU 0: 1714285 kHz, relation 0
May 26 17:13:57 tarm kernel: [  698.726701] ADDRCONF(NETDEV_UP): eth1: link is not ready
May 26 17:13:58 tarm kernel: [  699.619284] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
May 26 17:14:00 tarm kernel: [  701.625013] __ratelimit: 27 messages suppressed
May 26 17:14:00 tarm kernel: [  701.625238] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:14:01 tarm kernel: [  702.285362] tun0: Disabled Privacy Extensions
May 26 17:14:08 tarm kernel: [  709.912981] eth1: no IPv6 routers present
May 26 17:14:10 tarm kernel: [  711.125019] __ratelimit: 27 messages suppressed
May 26 17:14:10 tarm kernel: [  711.125255] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:14:10 tarm kernel: [  711.125430] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:14:51 tarm kernel: [  752.125025] __ratelimit: 12 messages suppressed
May 26 17:14:51 tarm kernel: [  752.125268] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:14:51 tarm kernel: [  752.125414] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:14:51 tarm kernel: [  752.125551] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:14:51 tarm kernel: [  752.125691] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:14:51 tarm kernel: [  752.125820] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:14:51 tarm kernel: [  752.125978] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:14:51 tarm kernel: [  752.126035] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:14:51 tarm kernel: [  752.624990] cpufreq-core: target for CPU 0: 685714 kHz, relation 0
May 26 17:14:54 tarm kernel: [  755.125030] __ratelimit: 20 messages suppressed
May 26 17:14:54 tarm kernel: [  755.125175] cpufreq-core: target for CPU 0: 137142 kHz, relation 0
May 26 17:15:05 tarm kernel: [  766.626964] __ratelimit: 39 messages suppressed
May 26 17:15:05 tarm kernel: [  766.627173] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:15:05 tarm kernel: [  766.627318] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:15:09 tarm kernel: [  770.625018] __ratelimit: 19 messages suppressed
May 26 17:15:09 tarm kernel: [  770.625466] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:15:18 tarm kernel: [  779.625026] __ratelimit: 13 messages suppressed
May 26 17:15:18 tarm kernel: [  779.625254] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:15:19 tarm kernel: [  780.124986] __ratelimit: 6 messages suppressed
May 26 17:15:19 tarm kernel: [  780.125126] cpufreq-core: target for CPU 0: 171428 kHz, relation 0
May 26 17:15:53 tarm kernel: [  814.624997] __ratelimit: 20 messages suppressed
May 26 17:15:53 tarm kernel: [  814.625215] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:15:53 tarm kernel: [  814.625381] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:15:53 tarm kernel: [  814.625513] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:15:53 tarm kernel: [  814.625650] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:15:53 tarm kernel: [  814.625779] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:15:53 tarm kernel: [  814.625913] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:15:54 tarm kernel: [  815.124988] __ratelimit: 1 messages suppressed
May 26 17:15:54 tarm kernel: [  815.125128] cpufreq-core: target for CPU 0: 0 kHz, relation 0
May 26 17:16:53 tarm kernel: [  874.624998] __ratelimit: 6 messages suppressed
May 26 17:16:53 tarm kernel: [  874.625222] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:16:53 tarm kernel: [  874.625388] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:16:53 tarm kernel: [  874.625522] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:16:53 tarm kernel: [  874.625658] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:16:53 tarm kernel: [  874.625786] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:16:53 tarm kernel: [  874.625920] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:16:53 tarm kernel: [  874.625975] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:16:54 tarm kernel: [  875.124986] cpufreq-core: target for CPU 0: 0 kHz, relation 0
May 26 17:16:54 tarm kernel: [  875.125137] acpi-cpufreq: acpi_cpufreq_target 0 (0)
May 26 17:16:54 tarm kernel: [  875.125211] freq-table: request for target 0 kHz (relation: 0) for cpu 0
May 26 17:17:53 tarm kernel: [  934.625012] __ratelimit: 18 messages suppressed
May 26 17:17:53 tarm kernel: [  934.625248] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:17:53 tarm kernel: [  934.625413] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:17:53 tarm kernel: [  934.625549] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:17:53 tarm kernel: [  934.625685] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:17:53 tarm kernel: [  934.625815] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:17:53 tarm kernel: [  934.625949] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:17:53 tarm kernel: [  934.626004] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:17:54 tarm kernel: [  935.124990] cpufreq-core: target for CPU 0: 171428 kHz, relation 0
May 26 17:17:54 tarm kernel: [  935.125159] acpi-cpufreq: acpi_cpufreq_target 171428 (0)
May 26 17:17:54 tarm kernel: [  935.125249] freq-table: request for target 171428 kHz (relation: 0) for cpu 0
May 26 17:18:04 tarm kernel: [  945.125001] __ratelimit: 4 messages suppressed
May 26 17:18:04 tarm kernel: [  945.125228] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:18:04 tarm kernel: [  945.125397] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:18:53 tarm kernel: [  994.625059] __ratelimit: 12 messages suppressed
May 26 17:18:53 tarm kernel: [  994.625297] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:18:53 tarm kernel: [  994.625440] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:18:53 tarm kernel: [  994.625575] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:18:53 tarm kernel: [  994.625715] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:18:53 tarm kernel: [  994.625847] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:18:53 tarm kernel: [  994.625983] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:18:53 tarm kernel: [  994.626037] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:18:54 tarm kernel: [  995.624989] cpufreq-core: target for CPU 0: 57142 kHz, relation 0
May 26 17:18:54 tarm kernel: [  995.625149] acpi-cpufreq: acpi_cpufreq_target 57142 (0)
May 26 17:18:54 tarm kernel: [  995.625223] freq-table: request for target 57142 kHz (relation: 0) for cpu 0
May 26 17:19:14 tarm kernel: [ 1015.125008] __ratelimit: 4 messages suppressed
May 26 17:19:14 tarm kernel: [ 1015.125233] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:19:14 tarm kernel: [ 1015.125399] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:19:14 tarm kernel: [ 1015.125533] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:19:14 tarm kernel: [ 1015.125670] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:19:54 tarm kernel: [ 1055.125008] __ratelimit: 17 messages suppressed
May 26 17:19:54 tarm kernel: [ 1055.125243] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:19:54 tarm kernel: [ 1055.125382] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:19:54 tarm kernel: [ 1055.125513] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:19:54 tarm kernel: [ 1055.125649] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:19:54 tarm kernel: [ 1055.125777] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:19:54 tarm kernel: [ 1055.125911] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:19:54 tarm kernel: [ 1055.125965] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:19:54 tarm kernel: [ 1055.625012] cpufreq-core: target for CPU 0: 57142 kHz, relation 0
May 26 17:20:14 tarm kernel: [ 1075.125008] __ratelimit: 6 messages suppressed
May 26 17:20:14 tarm kernel: [ 1075.125237] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:20:14 tarm kernel: [ 1075.125381] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:20:14 tarm kernel: [ 1075.125515] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:20:14 tarm kernel: [ 1075.125653] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:20:26 tarm kernel: [ 1087.124998] __ratelimit: 10 messages suppressed
May 26 17:20:26 tarm kernel: [ 1087.125221] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:20:26 tarm kernel: [ 1087.125384] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:20:54 tarm kernel: [ 1115.124997] __ratelimit: 12 messages suppressed
May 26 17:20:54 tarm kernel: [ 1115.125222] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:20:54 tarm kernel: [ 1115.125388] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:20:54 tarm kernel: [ 1115.125523] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:20:54 tarm kernel: [ 1115.125659] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:20:54 tarm kernel: [ 1115.125788] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:20:54 tarm kernel: [ 1115.125947] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:21:15 tarm kernel: [ 1136.125011] __ratelimit: 8 messages suppressed
May 26 17:21:15 tarm kernel: [ 1136.125243] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:21:15 tarm kernel: [ 1136.125382] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:21:15 tarm kernel: [ 1136.125527] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:21:15 tarm kernel: [ 1136.125689] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:21:54 tarm kernel: [ 1175.125018] __ratelimit: 10 messages suppressed
May 26 17:21:54 tarm kernel: [ 1175.125245] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:21:54 tarm kernel: [ 1175.125387] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:21:54 tarm kernel: [ 1175.125520] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:21:54 tarm kernel: [ 1175.125658] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:21:54 tarm kernel: [ 1175.125790] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:21:54 tarm kernel: [ 1175.125925] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:21:54 tarm kernel: [ 1175.125979] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:21:54 tarm kernel: [ 1175.624992] cpufreq-core: target for CPU 0: 1771428 kHz, relation 0
May 26 17:22:16 tarm kernel: [ 1197.625810] __ratelimit: 11 messages suppressed
May 26 17:22:16 tarm kernel: [ 1197.626031] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:22:16 tarm kernel: [ 1197.626176] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:22:16 tarm kernel: [ 1197.626457] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:22:16 tarm kernel: [ 1197.626603] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:22:29 tarm kernel: [ 1210.125024] __ratelimit: 10 messages suppressed
May 26 17:22:29 tarm kernel: [ 1210.125247] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:22:29 tarm kernel: [ 1210.125393] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:22:29 tarm kernel: [ 1210.125528] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:22:54 tarm kernel: [ 1235.625018] __ratelimit: 11 messages suppressed
May 26 17:22:54 tarm kernel: [ 1235.625239] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:22:54 tarm kernel: [ 1235.625403] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:22:54 tarm kernel: [ 1235.625538] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:22:54 tarm kernel: [ 1235.625674] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:22:54 tarm kernel: [ 1235.625803] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:23:16 tarm kernel: [ 1257.125017] __ratelimit: 9 messages suppressed
May 26 17:23:16 tarm kernel: [ 1257.125262] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:23:16 tarm kernel: [ 1257.125404] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:23:16 tarm kernel: [ 1257.125536] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:23:16 tarm kernel: [ 1257.125673] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:23:54 tarm kernel: [ 1295.625025] __ratelimit: 10 messages suppressed
May 26 17:23:54 tarm kernel: [ 1295.625295] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:23:54 tarm kernel: [ 1295.625453] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:23:54 tarm kernel: [ 1295.625591] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:23:54 tarm kernel: [ 1295.625732] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:23:54 tarm kernel: [ 1295.625866] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:23:54 tarm kernel: [ 1295.626006] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:23:54 tarm kernel: [ 1295.626069] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:23:55 tarm kernel: [ 1296.124988] cpufreq-core: target for CPU 0: 342857 kHz, relation 0
May 26 17:24:22 tarm kernel: [ 1323.125013] __ratelimit: 6 messages suppressed
May 26 17:24:22 tarm kernel: [ 1323.125256] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:24:22 tarm kernel: [ 1323.125399] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:24:22 tarm kernel: [ 1323.125532] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:24:22 tarm kernel: [ 1323.125670] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:24:22 tarm kernel: [ 1323.125798] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:24:25 tarm kernel: [ 1326.125101] __ratelimit: 9 messages suppressed
May 26 17:24:25 tarm kernel: [ 1326.125315] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:24:28 tarm kernel: [ 1329.625024] __ratelimit: 46 messages suppressed
May 26 17:24:28 tarm kernel: [ 1329.625208] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:24:33 tarm kernel: [ 1334.624994] __ratelimit: 53 messages suppressed
May 26 17:24:33 tarm kernel: [ 1334.625181] cpufreq-core: target for CPU 0: 121828 kHz, relation 0
May 26 17:24:44 tarm kernel: [ 1345.125022] __ratelimit: 6 messages suppressed
May 26 17:24:44 tarm kernel: [ 1345.125262] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:24:44 tarm kernel: [ 1345.125404] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:24:49 tarm kernel: [ 1350.125010] __ratelimit: 12 messages suppressed
May 26 17:24:49 tarm kernel: [ 1350.125260] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:24:54 tarm kernel: [ 1355.625050] __ratelimit: 34 messages suppressed
May 26 17:24:54 tarm kernel: [ 1355.625262] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:25:01 tarm kernel: [ 1362.124998] __ratelimit: 34 messages suppressed
May 26 17:25:01 tarm kernel: [ 1362.125214] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:25:03 tarm kernel: [ 1364.625011] __ratelimit: 13 messages suppressed
May 26 17:25:03 tarm kernel: [ 1364.625239] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:25:09 tarm kernel: [ 1370.625010] __ratelimit: 27 messages suppressed
May 26 17:25:09 tarm kernel: [ 1370.625247] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:25:24 tarm kernel: [ 1385.625023] __ratelimit: 13 messages suppressed
May 26 17:25:24 tarm kernel: [ 1385.625231] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:25:24 tarm kernel: [ 1385.625374] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:25:24 tarm kernel: [ 1385.625510] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:25:29 tarm kernel: [ 1390.125013] __ratelimit: 25 messages suppressed
May 26 17:25:29 tarm kernel: [ 1390.125240] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:25:36 tarm kernel: [ 1397.125009] __ratelimit: 20 messages suppressed
May 26 17:25:36 tarm kernel: [ 1397.125254] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:25:38 tarm kernel: [ 1399.625042] __ratelimit: 20 messages suppressed
May 26 17:25:38 tarm kernel: [ 1399.625259] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:25:54 tarm kernel: [ 1415.625005] __ratelimit: 41 messages suppressed
May 26 17:25:54 tarm kernel: [ 1415.625225] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:25:54 tarm kernel: [ 1415.625370] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:25:54 tarm kernel: [ 1415.625506] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:26:27 tarm kernel: [ 1448.625114] __ratelimit: 11 messages suppressed
May 26 17:26:27 tarm kernel: [ 1448.625339] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:26:27 tarm kernel: [ 1448.625508] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:26:27 tarm kernel: [ 1448.625693] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:26:27 tarm kernel: [ 1448.625829] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:26:27 tarm kernel: [ 1448.625957] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:26:27 tarm kernel: [ 1448.626090] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:26:54 tarm kernel: [ 1476.125842] __ratelimit: 8 messages suppressed
May 26 17:26:54 tarm kernel: [ 1476.126064] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:26:54 tarm kernel: [ 1476.126209] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:26:54 tarm kernel: [ 1476.126346] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:26:54 tarm kernel: [ 1476.126485] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:26:54 tarm kernel: [ 1476.126616] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:26:54 tarm kernel: [ 1476.126753] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:27:07 tarm kernel: [ 1488.625025] __ratelimit: 8 messages suppressed
May 26 17:27:07 tarm kernel: [ 1488.625264] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:27:07 tarm kernel: [ 1488.625406] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:27:09 tarm kernel: [ 1491.128646] __ratelimit: 12 messages suppressed
May 26 17:27:09 tarm kernel: [ 1491.128868] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:27:14 tarm kernel: [ 1496.125016] __ratelimit: 27 messages suppressed
May 26 17:27:14 tarm kernel: [ 1496.125257] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:27:21 tarm kernel: [ 1502.625087] __ratelimit: 34 messages suppressed
May 26 17:27:21 tarm kernel: [ 1502.625320] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:27:26 tarm kernel: [ 1507.625104] __ratelimit: 13 messages suppressed
May 26 17:27:26 tarm kernel: [ 1507.625321] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:27:54 tarm kernel: [ 1536.125010] __ratelimit: 18 messages suppressed
May 26 17:27:54 tarm kernel: [ 1536.125254] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:27:54 tarm kernel: [ 1536.125395] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:27:54 tarm kernel: [ 1536.125529] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:27:54 tarm kernel: [ 1536.125666] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:27:54 tarm kernel: [ 1536.125794] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:27:54 tarm kernel: [ 1536.125928] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:28:35 tarm kernel: [ 1577.125012] __ratelimit: 15 messages suppressed
May 26 17:28:35 tarm kernel: [ 1577.125259] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:28:35 tarm kernel: [ 1577.125429] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:28:35 tarm kernel: [ 1577.125565] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:28:35 tarm kernel: [ 1577.125702] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:28:35 tarm kernel: [ 1577.125831] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:28:35 tarm kernel: [ 1577.125965] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:28:35 tarm kernel: [ 1577.126019] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:28:36 tarm kernel: [ 1577.625003] cpufreq-core: target for CPU 0: 914285 kHz, relation 0
May 26 17:28:55 tarm kernel: [ 1596.625005] __ratelimit: 13 messages suppressed
May 26 17:28:55 tarm kernel: [ 1596.625226] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:28:55 tarm kernel: [ 1596.625396] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:28:55 tarm kernel: [ 1596.625533] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:28:55 tarm kernel: [ 1596.625686] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:29:04 tarm kernel: [ 1605.626418] __ratelimit: 10 messages suppressed
May 26 17:29:04 tarm kernel: [ 1605.626630] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:29:04 tarm kernel: [ 1605.626772] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:29:24 tarm kernel: [ 1625.625002] __ratelimit: 40 messages suppressed
May 26 17:29:24 tarm kernel: [ 1625.625218] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:29:24 tarm kernel: [ 1625.625363] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:29:24 tarm kernel: [ 1625.625501] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:29:24 tarm kernel: [ 1625.625643] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:29:39 tarm kernel: [ 1641.125020] __ratelimit: 31 messages suppressed
May 26 17:29:39 tarm kernel: [ 1641.125248] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:29:39 tarm kernel: [ 1641.125387] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:29:39 tarm kernel: [ 1641.125519] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:29:43 tarm kernel: [ 1644.624994] __ratelimit: 16 messages suppressed
May 26 17:29:43 tarm kernel: [ 1644.625160] cpufreq-core: target for CPU 0: 152342 kHz, relation 0
May 26 17:30:05 tarm kernel: [ 1666.625410] __ratelimit: 6 messages suppressed
May 26 17:30:05 tarm kernel: [ 1666.625629] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:30:05 tarm kernel: [ 1666.625774] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:30:05 tarm kernel: [ 1666.625912] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:30:05 tarm kernel: [ 1666.626054] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:30:12 tarm kernel: [ 1674.125189] __ratelimit: 17 messages suppressed
May 26 17:30:12 tarm kernel: [ 1674.125425] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:30:13 tarm kernel: [ 1674.624988] __ratelimit: 6 messages suppressed
May 26 17:30:13 tarm kernel: [ 1674.625130] cpufreq-core: target for CPU 0: 0 kHz, relation 0
May 26 17:30:18 tarm kernel: [ 1680.124993] __ratelimit: 13 messages suppressed
May 26 17:30:18 tarm kernel: [ 1680.125137] cpufreq-core: target for CPU 0: 57142 kHz, relation 0
May 26 17:30:23 tarm kernel: [ 1684.625011] __ratelimit: 41 messages suppressed
May 26 17:30:23 tarm kernel: [ 1684.625238] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:30:25 tarm kernel: [ 1687.103612] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 17:30:25 tarm kernel: [ 1687.103851] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:30:25 tarm kernel: [ 1687.103983] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:30:25 tarm kernel: [ 1687.104121] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:30:25 tarm kernel: [ 1687.104257] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:30:25 tarm kernel: [ 1687.104385] freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
May 26 17:30:25 tarm kernel: [ 1687.104521] freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
May 26 17:30:25 tarm kernel: [ 1687.104656] cpufreq-core: new min and max freqs are 800000 - 800000 kHz
May 26 17:30:25 tarm kernel: [ 1687.104788] cpufreq-core: governor: change or update limits
May 26 17:30:25 tarm kernel: [ 1687.105041] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 17:30:33 tarm kernel: [ 1695.412124] __ratelimit: 25 messages suppressed
May 26 17:30:33 tarm kernel: [ 1695.412329] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
May 26 17:30:33 tarm kernel: [ 1695.412490] cpufreq-core: updating policy for CPU 0
May 26 17:30:33 tarm kernel: [ 1695.412623] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 17:30:33 tarm kernel: [ 1695.412757] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:30:33 tarm kernel: [ 1695.413087] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:30:33 tarm kernel: [ 1695.413265] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:30:33 tarm kernel: [ 1695.413402] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:30:33 tarm kernel: [ 1695.413529] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:30:33 tarm kernel: [ 1695.413664] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:30:33 tarm kernel: [ 1695.413798] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
May 26 17:30:33 tarm kernel: [ 1695.413929] cpufreq-core: governor: change or update limits
May 26 17:30:33 tarm kernel: [ 1695.414056] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 17:30:51 tarm kernel: [ 1712.625338] __ratelimit: 3 messages suppressed
May 26 17:30:51 tarm kernel: [ 1712.625566] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:30:51 tarm kernel: [ 1712.625711] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:30:51 tarm kernel: [ 1712.625863] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:30:55 tarm kernel: [ 1716.625004] __ratelimit: 11 messages suppressed
May 26 17:30:55 tarm kernel: [ 1716.625234] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:30:58 tarm kernel: [ 1719.625020] __ratelimit: 20 messages suppressed
May 26 17:30:58 tarm kernel: [ 1719.625245] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:31:08 tarm kernel: [ 1729.625013] __ratelimit: 20 messages suppressed
May 26 17:31:08 tarm kernel: [ 1729.625257] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:31:08 tarm kernel: [ 1729.625405] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:31:55 tarm kernel: [ 1777.125078] __ratelimit: 33 messages suppressed
May 26 17:31:55 tarm kernel: [ 1777.125305] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:31:55 tarm kernel: [ 1777.125462] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:31:55 tarm kernel: [ 1777.125596] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:31:55 tarm kernel: [ 1777.125733] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:31:55 tarm kernel: [ 1777.125862] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:31:55 tarm kernel: [ 1777.126989] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:31:55 tarm kernel: [ 1777.127043] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:31:56 tarm kernel: [ 1777.625029] cpufreq-core: target for CPU 0: 1257142 kHz, relation 0
May 26 17:31:56 tarm kernel: [ 1777.625190] acpi-cpufreq: acpi_cpufreq_target 1257142 (0)
May 26 17:32:08 tarm kernel: [ 1789.625048] __ratelimit: 12 messages suppressed
May 26 17:32:08 tarm kernel: [ 1789.625277] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:32:08 tarm kernel: [ 1789.625420] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:32:08 tarm kernel: [ 1789.625554] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:32:27 tarm kernel: [ 1808.625076] __ratelimit: 23 messages suppressed
May 26 17:32:27 tarm kernel: [ 1808.625314] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:32:27 tarm kernel: [ 1808.625477] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:32:27 tarm kernel: [ 1808.625611] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:32:28 tarm kernel: [ 1809.625036] __ratelimit: 11 messages suppressed
May 26 17:32:28 tarm kernel: [ 1809.625204] cpufreq-core: target for CPU 0: 594285 kHz, relation 0
May 26 17:32:55 tarm kernel: [ 1837.125529] __ratelimit: 6 messages suppressed
May 26 17:32:55 tarm kernel: [ 1837.125771] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:32:55 tarm kernel: [ 1837.125927] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:32:55 tarm kernel: [ 1837.126060] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:32:55 tarm kernel: [ 1837.126220] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:32:55 tarm kernel: [ 1837.126384] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:33:08 tarm kernel: [ 1850.124998] __ratelimit: 9 messages suppressed
May 26 17:33:08 tarm kernel: [ 1850.125223] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:33:08 tarm kernel: [ 1850.125389] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:33:08 tarm kernel: [ 1850.125546] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:33:15 tarm kernel: [ 1856.625076] __ratelimit: 11 messages suppressed
May 26 17:33:15 tarm kernel: [ 1856.625322] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:33:22 tarm kernel: [ 1864.124999] __ratelimit: 13 messages suppressed
May 26 17:33:22 tarm kernel: [ 1864.125220] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:33:23 tarm kernel: [ 1864.624994] __ratelimit: 6 messages suppressed
May 26 17:33:23 tarm kernel: [ 1864.625132] cpufreq-core: target for CPU 0: 0 kHz, relation 0
May 26 17:33:37 tarm kernel: [ 1878.625014] __ratelimit: 60 messages suppressed
May 26 17:33:37 tarm kernel: [ 1878.625252] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:33:37 tarm kernel: [ 1878.625420] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:33:38 tarm kernel: [ 1879.624989] __ratelimit: 10 messages suppressed
May 26 17:33:38 tarm kernel: [ 1879.625128] cpufreq-core: target for CPU 0: 228571 kHz, relation 0
May 26 17:33:43 tarm kernel: [ 1884.626773] __ratelimit: 20 messages suppressed
May 26 17:33:43 tarm kernel: [ 1884.626985] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:33:49 tarm kernel: [ 1891.128517] __ratelimit: 34 messages suppressed
May 26 17:33:49 tarm kernel: [ 1891.128729] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:33:53 tarm kernel: [ 1894.624989] __ratelimit: 27 messages suppressed
May 26 17:33:53 tarm kernel: [ 1894.625138] cpufreq-core: target for CPU 0: 914285 kHz, relation 0
May 26 17:34:10 tarm kernel: [ 1911.625009] __ratelimit: 27 messages suppressed
May 26 17:34:10 tarm kernel: [ 1911.625242] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:34:10 tarm kernel: [ 1911.625381] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:34:10 tarm kernel: [ 1911.625513] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:34:57 tarm kernel: [ 1959.125001] __ratelimit: 25 messages suppressed
May 26 17:34:57 tarm kernel: [ 1959.125227] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:34:57 tarm kernel: [ 1959.125397] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:34:57 tarm kernel: [ 1959.125532] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:34:57 tarm kernel: [ 1959.125670] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:34:57 tarm kernel: [ 1959.125798] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:34:57 tarm kernel: [ 1959.125931] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:34:57 tarm kernel: [ 1959.125986] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:34:58 tarm kernel: [ 1959.624990] cpufreq-core: target for CPU 0: 1257142 kHz, relation 0
May 26 17:34:58 tarm kernel: [ 1959.625142] acpi-cpufreq: acpi_cpufreq_target 1257142 (0)
May 26 17:34:58 tarm kernel: [ 1959.625221] freq-table: request for target 1257142 kHz (relation: 0) for cpu 0
May 26 17:35:03 tarm kernel: [ 1964.624997] __ratelimit: 39 messages suppressed
May 26 17:35:03 tarm kernel: [ 1964.625162] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:35:09 tarm kernel: [ 1970.625110] __ratelimit: 34 messages suppressed
May 26 17:35:09 tarm kernel: [ 1970.625347] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:35:13 tarm kernel: [ 1974.625010] __ratelimit: 39 messages suppressed
May 26 17:35:13 tarm kernel: [ 1974.625164] cpufreq-core: target for CPU 0: 914285 kHz, relation 0
May 26 17:35:18 tarm kernel: [ 1979.624990] __ratelimit: 27 messages suppressed
May 26 17:35:18 tarm kernel: [ 1979.625150] cpufreq-core: target for CPU 0: 137142 kHz, relation 0
May 26 17:35:23 tarm kernel: [ 1984.625099] __ratelimit: 13 messages suppressed
May 26 17:35:23 tarm kernel: [ 1984.625242] cpufreq-core: target for CPU 0: 228571 kHz, relation 0
May 26 17:35:28 tarm kernel: [ 1989.625013] __ratelimit: 20 messages suppressed
May 26 17:35:28 tarm kernel: [ 1989.625247] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:35:53 tarm kernel: [ 2014.625029] __ratelimit: 13 messages suppressed
May 26 17:35:53 tarm kernel: [ 2014.625260] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:35:53 tarm kernel: [ 2014.625408] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:35:53 tarm kernel: [ 2014.625545] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:35:53 tarm kernel: [ 2014.625688] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:35:53 tarm kernel: [ 2014.625830] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:35:58 tarm kernel: [ 2020.124991] __ratelimit: 49 messages suppressed
May 26 17:35:58 tarm kernel: [ 2020.125144] cpufreq-core: target for CPU 0: 960000 kHz, relation 0
May 26 17:36:04 tarm kernel: [ 2025.625733] __ratelimit: 27 messages suppressed
May 26 17:36:04 tarm kernel: [ 2025.625970] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:36:08 tarm kernel: [ 2030.124999] __ratelimit: 27 messages suppressed
May 26 17:36:08 tarm kernel: [ 2030.125208] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:36:45 tarm kernel: [ 2066.624998] __ratelimit: 13 messages suppressed
May 26 17:36:45 tarm kernel: [ 2066.625471] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:36:45 tarm kernel: [ 2066.625649] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:36:45 tarm kernel: [ 2066.625789] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:36:45 tarm kernel: [ 2066.625927] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:36:45 tarm kernel: [ 2066.626087] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:36:45 tarm kernel: [ 2066.626225] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:36:45 tarm kernel: [ 2066.626279] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:36:56 tarm kernel: [ 2077.625025] __ratelimit: 21 messages suppressed
May 26 17:36:56 tarm kernel: [ 2077.625259] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:36:56 tarm kernel: [ 2077.625402] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:37:32 tarm kernel: [ 2114.125331] __ratelimit: 12 messages suppressed
May 26 17:37:32 tarm kernel: [ 2114.125558] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:37:32 tarm kernel: [ 2114.125703] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:37:32 tarm kernel: [ 2114.125839] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:37:32 tarm kernel: [ 2114.125978] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:37:32 tarm kernel: [ 2114.126110] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:37:32 tarm kernel: [ 2114.126249] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:37:32 tarm kernel: [ 2114.126305] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:37:33 tarm kernel: [ 2114.624991] cpufreq-core: target for CPU 0: 1771428 kHz, relation 0
May 26 17:37:38 tarm kernel: [ 2120.125076] __ratelimit: 11 messages suppressed
May 26 17:37:38 tarm kernel: [ 2120.125306] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:37:43 tarm kernel: [ 2124.625018] __ratelimit: 27 messages suppressed
May 26 17:37:43 tarm kernel: [ 2124.625164] cpufreq-core: target for CPU 0: 514285 kHz, relation 0
May 26 17:37:51 tarm kernel: [ 2133.125018] __ratelimit: 6 messages suppressed
May 26 17:37:51 tarm kernel: [ 2133.125274] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:37:53 tarm kernel: [ 2135.124987] __ratelimit: 20 messages suppressed
May 26 17:37:53 tarm kernel: [ 2135.125133] cpufreq-core: target for CPU 0: 400000 kHz, relation 0
May 26 17:38:08 tarm kernel: [ 2150.125024] __ratelimit: 20 messages suppressed
May 26 17:38:08 tarm kernel: [ 2150.125263] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:38:08 tarm kernel: [ 2150.125406] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:38:08 tarm kernel: [ 2150.125541] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:38:44 tarm kernel: [ 2186.125030] __ratelimit: 39 messages suppressed
May 26 17:38:44 tarm kernel: [ 2186.125274] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:38:44 tarm kernel: [ 2186.125419] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:38:44 tarm kernel: [ 2186.125554] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:38:44 tarm kernel: [ 2186.125692] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:38:44 tarm kernel: [ 2186.125950] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:38:44 tarm kernel: [ 2186.126086] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:38:44 tarm kernel: [ 2186.126140] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:39:42 tarm kernel: [ 2244.125003] __ratelimit: 7 messages suppressed
May 26 17:39:42 tarm kernel: [ 2244.125386] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:39:42 tarm kernel: [ 2244.125533] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:39:42 tarm kernel: [ 2244.125668] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:39:42 tarm kernel: [ 2244.125805] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:39:42 tarm kernel: [ 2244.125933] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:39:42 tarm kernel: [ 2244.126067] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:39:42 tarm kernel: [ 2244.126122] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:39:43 tarm kernel: [ 2244.624993] cpufreq-core: target for CPU 0: 1142857 kHz, relation 0
May 26 17:39:43 tarm kernel: [ 2244.625151] acpi-cpufreq: acpi_cpufreq_target 1142857 (0)
May 26 17:39:43 tarm kernel: [ 2244.625231] freq-table: request for target 1142857 kHz (relation: 0) for cpu 0
May 26 17:39:47 tarm kernel: [ 2249.124999] __ratelimit: 11 messages suppressed
May 26 17:39:47 tarm kernel: [ 2249.125216] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:39:55 tarm kernel: [ 2257.125017] __ratelimit: 27 messages suppressed
May 26 17:39:55 tarm kernel: [ 2257.125257] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:39:57 tarm kernel: [ 2259.124988] __ratelimit: 20 messages suppressed
May 26 17:39:57 tarm kernel: [ 2259.125137] cpufreq-core: target for CPU 0: 342857 kHz, relation 0
May 26 17:40:03 tarm kernel: [ 2264.625779] __ratelimit: 6 messages suppressed
May 26 17:40:03 tarm kernel: [ 2264.626008] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:40:08 tarm kernel: [ 2269.625005] __ratelimit: 13 messages suppressed
May 26 17:40:08 tarm kernel: [ 2269.625224] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:40:16 tarm kernel: [ 2277.625001] __ratelimit: 13 messages suppressed
May 26 17:40:16 tarm kernel: [ 2277.625225] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:40:57 tarm kernel: [ 2318.625170] __ratelimit: 13 messages suppressed
May 26 17:40:57 tarm kernel: [ 2318.625402] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:40:57 tarm kernel: [ 2318.625545] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:40:57 tarm kernel: [ 2318.625680] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:40:57 tarm kernel: [ 2318.625833] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:40:57 tarm kernel: [ 2318.625962] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:40:57 tarm kernel: [ 2318.626095] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:40:57 tarm kernel: [ 2318.626149] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:40:57 tarm kernel: [ 2319.124990] cpufreq-core: target for CPU 0: 400000 kHz, relation 0
May 26 17:40:57 tarm kernel: [ 2319.125141] acpi-cpufreq: acpi_cpufreq_target 400000 (0)
May 26 17:41:07 tarm kernel: [ 2329.125011] __ratelimit: 5 messages suppressed
May 26 17:41:07 tarm kernel: [ 2329.125242] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:41:07 tarm kernel: [ 2329.125381] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:41:13 tarm kernel: [ 2334.625002] __ratelimit: 33 messages suppressed
May 26 17:41:13 tarm kernel: [ 2334.625220] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:41:19 tarm kernel: [ 2340.625925] __ratelimit: 27 messages suppressed
May 26 17:41:19 tarm kernel: [ 2340.626164] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:41:22 tarm kernel: [ 2344.125010] __ratelimit: 27 messages suppressed
May 26 17:41:22 tarm kernel: [ 2344.125242] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:42:05 tarm kernel: [ 2386.625014] __ratelimit: 41 messages suppressed
May 26 17:42:05 tarm kernel: [ 2386.625238] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:42:05 tarm kernel: [ 2386.625411] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:42:05 tarm kernel: [ 2386.625548] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:42:05 tarm kernel: [ 2386.625689] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:42:05 tarm kernel: [ 2386.625818] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:42:05 tarm kernel: [ 2386.626082] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:42:05 tarm kernel: [ 2386.626137] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:42:05 tarm kernel: [ 2387.124995] cpufreq-core: target for CPU 0: 114285 kHz, relation 0
May 26 17:42:23 tarm kernel: [ 2405.126157] __ratelimit: 6 messages suppressed
May 26 17:42:23 tarm kernel: [ 2405.126390] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:42:23 tarm kernel: [ 2405.126536] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:42:23 tarm kernel: [ 2405.126671] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:42:23 tarm kernel: [ 2405.126810] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:42:27 tarm kernel: [ 2409.124997] __ratelimit: 31 messages suppressed
May 26 17:42:27 tarm kernel: [ 2409.125156] cpufreq-core: target for CPU 0: 960000 kHz, relation 0
May 26 17:42:57 tarm kernel: [ 2439.125015] __ratelimit: 13 messages suppressed
May 26 17:42:57 tarm kernel: [ 2439.125247] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:42:57 tarm kernel: [ 2439.125392] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:42:57 tarm kernel: [ 2439.125526] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:42:57 tarm kernel: [ 2439.125664] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:42:57 tarm kernel: [ 2439.125792] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:42:57 tarm kernel: [ 2439.125926] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:44:08 tarm kernel: [ 2509.627811] __ratelimit: 15 messages suppressed
May 26 17:44:08 tarm kernel: [ 2509.628028] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:44:08 tarm kernel: [ 2509.628172] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:44:08 tarm kernel: [ 2509.628479] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:44:08 tarm kernel: [ 2509.628623] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:44:08 tarm kernel: [ 2509.628782] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:44:08 tarm kernel: [ 2509.628934] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:44:08 tarm kernel: [ 2509.629114] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:44:08 tarm kernel: [ 2510.128990] cpufreq-core: target for CPU 0: 1200000 kHz, relation 0
May 26 17:44:08 tarm kernel: [ 2510.129147] acpi-cpufreq: acpi_cpufreq_target 1200000 (0)
May 26 17:44:08 tarm kernel: [ 2510.129225] freq-table: request for target 1200000 kHz (relation: 0) for cpu 0
May 26 17:45:53 tarm kernel: [ 2614.625003] __ratelimit: 11 messages suppressed
May 26 17:45:53 tarm kernel: [ 2614.625214] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:45:53 tarm kernel: [ 2614.625359] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:45:53 tarm kernel: [ 2614.625497] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:45:53 tarm kernel: [ 2614.625638] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:45:53 tarm kernel: [ 2614.625773] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:45:53 tarm kernel: [ 2614.625914] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:45:53 tarm kernel: [ 2614.625971] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:45:53 tarm kernel: [ 2615.124994] cpufreq-core: target for CPU 0: 0 kHz, relation 0
May 26 17:45:53 tarm kernel: [ 2615.125153] acpi-cpufreq: acpi_cpufreq_target 0 (0)
May 26 17:45:53 tarm kernel: [ 2615.125213] freq-table: request for target 0 kHz (relation: 0) for cpu 0
May 26 17:45:58 tarm kernel: [ 2620.125038] __ratelimit: 4 messages suppressed
May 26 17:45:58 tarm kernel: [ 2620.125262] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:46:30 tarm kernel: [ 2652.125063] __ratelimit: 13 messages suppressed
May 26 17:46:30 tarm kernel: [ 2652.125294] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:46:30 tarm kernel: [ 2652.125434] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:46:30 tarm kernel: [ 2652.125566] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:46:30 tarm kernel: [ 2652.125702] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:46:30 tarm kernel: [ 2652.125831] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:46:30 tarm kernel: [ 2652.125965] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:47:03 tarm kernel: [ 2684.630045] __ratelimit: 8 messages suppressed
May 26 17:47:03 tarm kernel: [ 2684.630290] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:47:03 tarm kernel: [ 2684.630432] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:47:03 tarm kernel: [ 2684.630565] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:47:03 tarm kernel: [ 2684.630702] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:47:03 tarm kernel: [ 2684.630832] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:47:03 tarm kernel: [ 2684.630968] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:47:03 tarm kernel: [ 2684.631023] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:47:24 tarm kernel: [ 2706.124999] __ratelimit: 7 messages suppressed
May 26 17:47:24 tarm kernel: [ 2706.125221] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:47:24 tarm kernel: [ 2706.125385] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:47:24 tarm kernel: [ 2706.125520] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:47:24 tarm kernel: [ 2706.125658] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:47:58 tarm kernel: [ 2740.124998] __ratelimit: 10 messages suppressed
May 26 17:47:58 tarm kernel: [ 2740.125220] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:47:58 tarm kernel: [ 2740.125409] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:47:58 tarm kernel: [ 2740.125545] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:47:58 tarm kernel: [ 2740.125683] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:47:58 tarm kernel: [ 2740.125811] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:47:58 tarm kernel: [ 2740.125946] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:47:58 tarm kernel: [ 2740.126000] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:48:09 tarm kernel: [ 2751.125047] __ratelimit: 21 messages suppressed
May 26 17:48:09 tarm kernel: [ 2751.125269] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:48:09 tarm kernel: [ 2751.125434] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:48:58 tarm kernel: [ 2800.125099] __ratelimit: 33 messages suppressed
May 26 17:48:58 tarm kernel: [ 2800.125338] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:48:58 tarm kernel: [ 2800.125482] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:48:58 tarm kernel: [ 2800.125617] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:48:58 tarm kernel: [ 2800.125756] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:48:58 tarm kernel: [ 2800.125886] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:48:58 tarm kernel: [ 2800.126021] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:48:58 tarm kernel: [ 2800.126075] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:48:59 tarm kernel: [ 2801.124990] cpufreq-core: target for CPU 0: 285714 kHz, relation 0
May 26 17:48:59 tarm kernel: [ 2801.125146] acpi-cpufreq: acpi_cpufreq_target 285714 (0)
May 26 17:48:59 tarm kernel: [ 2801.125221] freq-table: request for target 285714 kHz (relation: 0) for cpu 0
May 26 17:49:05 tarm kernel: [ 2806.625051] __ratelimit: 4 messages suppressed
May 26 17:49:05 tarm kernel: [ 2806.625274] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:49:36 tarm kernel: [ 2837.625751] __ratelimit: 13 messages suppressed
May 26 17:49:36 tarm kernel: [ 2837.625989] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:49:36 tarm kernel: [ 2837.626134] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:49:36 tarm kernel: [ 2837.626432] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:49:36 tarm kernel: [ 2837.626578] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:49:36 tarm kernel: [ 2837.626711] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:49:36 tarm kernel: [ 2837.626849] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:49:48 tarm kernel: [ 2850.125068] __ratelimit: 8 messages suppressed
May 26 17:49:48 tarm kernel: [ 2850.125309] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:49:48 tarm kernel: [ 2850.125449] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:49:48 tarm kernel: [ 2850.125581] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:50:37 tarm kernel: [ 2898.625001] __ratelimit: 11 messages suppressed
May 26 17:50:37 tarm kernel: [ 2898.625247] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:50:37 tarm kernel: [ 2898.625393] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:50:37 tarm kernel: [ 2898.625543] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:50:37 tarm kernel: [ 2898.625682] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:50:37 tarm kernel: [ 2898.625811] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:50:37 tarm kernel: [ 2898.625945] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:50:37 tarm kernel: [ 2898.625999] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:50:37 tarm kernel: [ 2899.124989] cpufreq-core: target for CPU 0: 0 kHz, relation 0
May 26 17:50:37 tarm kernel: [ 2899.125144] acpi-cpufreq: acpi_cpufreq_target 0 (0)
May 26 17:51:20 tarm kernel: [ 2941.625016] __ratelimit: 5 messages suppressed
May 26 17:51:20 tarm kernel: [ 2941.625237] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:51:20 tarm kernel: [ 2941.625406] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:51:20 tarm kernel: [ 2941.625546] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:51:20 tarm kernel: [ 2941.625689] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:51:20 tarm kernel: [ 2941.625824] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:51:20 tarm kernel: [ 2941.626027] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:51:20 tarm kernel: [ 2941.626285] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:51:20 tarm kernel: [ 2942.124990] cpufreq-core: target for CPU 0: 1085714 kHz, relation 0
May 26 17:51:20 tarm kernel: [ 2942.125146] acpi-cpufreq: acpi_cpufreq_target 1085714 (0)
May 26 17:51:23 tarm kernel: [ 2945.124994] __ratelimit: 31 messages suppressed
May 26 17:51:23 tarm kernel: [ 2945.125180] cpufreq-core: target for CPU 0: 944171 kHz, relation 0
May 26 17:51:28 tarm kernel: [ 2950.124996] __ratelimit: 37 messages suppressed
May 26 17:51:28 tarm kernel: [ 2950.125182] cpufreq-core: target for CPU 0: 852800 kHz, relation 0
May 26 17:51:55 tarm kernel: [ 2977.125010] __ratelimit: 26 messages suppressed
May 26 17:51:55 tarm kernel: [ 2977.125244] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:51:55 tarm kernel: [ 2977.125384] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:51:55 tarm kernel: [ 2977.125516] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:51:55 tarm kernel: [ 2977.125652] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:51:55 tarm kernel: [ 2977.125806] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:51:58 tarm kernel: [ 2980.125002] __ratelimit: 30 messages suppressed
May 26 17:51:58 tarm kernel: [ 2980.125197] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:52:03 tarm kernel: [ 2984.753859] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 17:52:03 tarm kernel: [ 2984.754110] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:52:03 tarm kernel: [ 2984.754246] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:52:03 tarm kernel: [ 2984.754387] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:52:03 tarm kernel: [ 2984.754526] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:52:03 tarm kernel: [ 2984.754657] freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
May 26 17:52:03 tarm kernel: [ 2984.754935] freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
May 26 17:52:03 tarm kernel: [ 2984.755073] cpufreq-core: new min and max freqs are 800000 - 800000 kHz
May 26 17:52:03 tarm kernel: [ 2984.755208] cpufreq-core: governor: change or update limits
May 26 17:52:03 tarm kernel: [ 2984.755339] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 17:52:15 tarm kernel: [ 2997.184583] __ratelimit: 39 messages suppressed
May 26 17:52:15 tarm kernel: [ 2997.184789] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
May 26 17:52:15 tarm kernel: [ 2997.185072] cpufreq-core: updating policy for CPU 0
May 26 17:52:15 tarm kernel: [ 2997.185310] acpi-cpufreq: get_cur_freq_on_cpu (0)
May 26 17:52:15 tarm kernel: [ 2997.185448] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 17:52:15 tarm kernel: [ 2997.185583] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:52:15 tarm kernel: [ 2997.185710] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:52:15 tarm kernel: [ 2997.185846] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:52:15 tarm kernel: [ 2997.186002] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:52:15 tarm kernel: [ 2997.186153] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:52:15 tarm kernel: [ 2997.186289] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:52:15 tarm kernel: [ 2997.186423] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
May 26 17:52:15 tarm kernel: [ 2997.186555] cpufreq-core: governor: change or update limits
May 26 17:52:15 tarm kernel: [ 2997.186682] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 17:53:50 tarm kernel: [ 3091.625021] __ratelimit: 2 messages suppressed
May 26 17:53:50 tarm kernel: [ 3091.625236] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:53:50 tarm kernel: [ 3091.625380] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:53:50 tarm kernel: [ 3091.625514] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:53:50 tarm kernel: [ 3091.625653] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:53:50 tarm kernel: [ 3091.625785] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:53:50 tarm kernel: [ 3091.626086] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:53:50 tarm kernel: [ 3091.626142] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:53:50 tarm kernel: [ 3092.124989] cpufreq-core: target for CPU 0: 171428 kHz, relation 0
May 26 17:53:50 tarm kernel: [ 3092.125141] acpi-cpufreq: acpi_cpufreq_target 171428 (0)
May 26 17:53:50 tarm kernel: [ 3092.125227] freq-table: request for target 171428 kHz (relation: 0) for cpu 0
May 26 17:54:23 tarm kernel: [ 3125.125835] __ratelimit: 4 messages suppressed
May 26 17:54:23 tarm kernel: [ 3125.126073] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:54:23 tarm kernel: [ 3125.126214] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:54:23 tarm kernel: [ 3125.126374] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:54:23 tarm kernel: [ 3125.126511] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:54:23 tarm kernel: [ 3125.126639] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:54:23 tarm kernel: [ 3125.126772] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:54:25 tarm kernel: [ 3126.625001] __ratelimit: 15 messages suppressed
May 26 17:54:25 tarm kernel: [ 3126.625156] cpufreq-core: target for CPU 0: 1600000 kHz, relation 0
May 26 17:54:59 tarm kernel: [ 3161.125068] __ratelimit: 13 messages suppressed
May 26 17:54:59 tarm kernel: [ 3161.125422] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:54:59 tarm kernel: [ 3161.125563] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:54:59 tarm kernel: [ 3161.125695] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:54:59 tarm kernel: [ 3161.125831] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:54:59 tarm kernel: [ 3161.125960] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:54:59 tarm kernel: [ 3161.126189] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:55:00 tarm kernel: [ 3161.624989] __ratelimit: 1 messages suppressed
May 26 17:55:00 tarm kernel: [ 3161.625138] cpufreq-core: target for CPU 0: 628571 kHz, relation 0
May 26 17:57:59 tarm kernel: [ 3341.125000] __ratelimit: 20 messages suppressed
May 26 17:57:59 tarm kernel: [ 3341.125237] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:57:59 tarm kernel: [ 3341.125407] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:57:59 tarm kernel: [ 3341.125542] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:57:59 tarm kernel: [ 3341.125680] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:57:59 tarm kernel: [ 3341.125808] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:57:59 tarm kernel: [ 3341.125941] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 17:57:59 tarm kernel: [ 3341.126003] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 17:58:00 tarm kernel: [ 3342.124989] cpufreq-core: target for CPU 0: 0 kHz, relation 0
May 26 17:58:00 tarm kernel: [ 3342.125176] acpi-cpufreq: acpi_cpufreq_target 0 (0)
May 26 17:58:00 tarm kernel: [ 3342.125238] freq-table: request for target 0 kHz (relation: 0) for cpu 0
May 26 17:58:09 tarm kernel: [ 3350.625020] __ratelimit: 4 messages suppressed
May 26 17:58:09 tarm kernel: [ 3350.625222] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:58:11 tarm kernel: [ 3353.124988] __ratelimit: 6 messages suppressed
May 26 17:58:11 tarm kernel: [ 3353.125210] cpufreq-core: target for CPU 0: 1600000 kHz, relation 0
May 26 17:58:16 tarm kernel: [ 3357.625011] __ratelimit: 13 messages suppressed
May 26 17:58:16 tarm kernel: [ 3357.625238] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:58:20 tarm kernel: [ 3361.625052] __ratelimit: 39 messages suppressed
May 26 17:58:20 tarm kernel: [ 3361.625267] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:58:24 tarm kernel: [ 3366.125013] __ratelimit: 48 messages suppressed
May 26 17:58:24 tarm kernel: [ 3366.125240] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:58:27 tarm kernel: [ 3368.864167] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 17:58:27 tarm kernel: [ 3368.864411] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:58:27 tarm kernel: [ 3368.864544] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:58:27 tarm kernel: [ 3368.864681] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:58:27 tarm kernel: [ 3368.864816] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:58:27 tarm kernel: [ 3368.864944] freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
May 26 17:58:27 tarm kernel: [ 3368.865130] freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
May 26 17:58:27 tarm kernel: [ 3368.865297] cpufreq-core: new min and max freqs are 800000 - 800000 kHz
May 26 17:58:27 tarm kernel: [ 3368.865433] cpufreq-core: governor: change or update limits
May 26 17:58:27 tarm kernel: [ 3368.865564] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 17:58:43 tarm kernel: [ 3385.479447] __ratelimit: 30 messages suppressed
May 26 17:58:43 tarm kernel: [ 3385.479651] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
May 26 17:58:43 tarm kernel: [ 3385.479810] cpufreq-core: updating policy for CPU 0
May 26 17:58:43 tarm kernel: [ 3385.479938] acpi-cpufreq: get_cur_freq_on_cpu (0)
May 26 17:58:43 tarm kernel: [ 3385.480067] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 17:58:43 tarm kernel: [ 3385.480199] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:58:43 tarm kernel: [ 3385.480325] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:58:43 tarm kernel: [ 3385.480459] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:58:43 tarm kernel: [ 3385.480591] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:58:43 tarm kernel: [ 3385.480716] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:58:43 tarm kernel: [ 3385.480850] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:58:43 tarm kernel: [ 3385.481074] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
May 26 17:58:43 tarm kernel: [ 3385.481231] cpufreq-core: governor: change or update limits
May 26 17:58:43 tarm kernel: [ 3385.481361] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 17:59:07 tarm kernel: [ 3408.625001] __ratelimit: 2 messages suppressed
May 26 17:59:07 tarm kernel: [ 3408.625221] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:59:07 tarm kernel: [ 3408.625385] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:59:07 tarm kernel: [ 3408.625519] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:59:07 tarm kernel: [ 3408.625677] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:59:07 tarm kernel: [ 3408.625803] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:59:10 tarm kernel: [ 3411.625026] __ratelimit: 9 messages suppressed
May 26 17:59:10 tarm kernel: [ 3411.625265] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:59:36 tarm kernel: [ 3438.125078] __ratelimit: 13 messages suppressed
May 26 17:59:36 tarm kernel: [ 3438.125317] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:59:36 tarm kernel: [ 3438.125536] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 17:59:36 tarm kernel: [ 3438.125667] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 17:59:36 tarm kernel: [ 3438.125799] freq-table: target is 0 (2000000 kHz, 0)
May 26 17:59:36 tarm kernel: [ 3438.127191] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 17:59:39 tarm kernel: [ 3441.125011] __ratelimit: 16 messages suppressed
May 26 17:59:39 tarm kernel: [ 3441.125163] cpufreq-core: target for CPU 0: 571428 kHz, relation 0
May 26 17:59:44 tarm kernel: [ 3446.129064] __ratelimit: 51 messages suppressed
May 26 17:59:44 tarm kernel: [ 3446.129319] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 17:59:50 tarm kernel: [ 3451.625003] __ratelimit: 39 messages suppressed
May 26 17:59:50 tarm kernel: [ 3451.625174] cpufreq-core: target for CPU 0: 1142857 kHz, relation 0
May 26 17:59:54 tarm kernel: [ 3456.079363] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 17:59:54 tarm kernel: [ 3456.079519] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:59:54 tarm kernel: [ 3456.079577] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 17:59:54 tarm kernel: [ 3456.079647] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 17:59:54 tarm kernel: [ 3456.079707] acpi-cpufreq: acpi_cpufreq_verify
May 26 17:59:54 tarm kernel: [ 3456.079762] freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
May 26 17:59:54 tarm kernel: [ 3456.079821] freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
May 26 17:59:54 tarm kernel: [ 3456.079879] cpufreq-core: new min and max freqs are 800000 - 800000 kHz
May 26 17:59:54 tarm kernel: [ 3456.079936] cpufreq-core: governor: change or update limits
May 26 17:59:54 tarm kernel: [ 3456.079992] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 17:59:54 tarm kernel: [ 3456.080058] cpufreq-core: target for CPU 0: 800000 kHz, relation 1
May 26 17:59:54 tarm kernel: [ 3456.080114] acpi-cpufreq: acpi_cpufreq_target 800000 (0)
May 26 17:59:54 tarm kernel: [ 3456.080196] freq-table: request for target 800000 kHz (relation: 1) for cpu 0
May 26 17:59:54 tarm kernel: [ 3456.080254] freq-table: target is 4 (800000 kHz, 4)
May 26 17:59:54 tarm kernel: [ 3456.080310] cpufreq-core: notification 0 of frequency transition to 800000 kHz
May 26 17:59:54 tarm kernel: [ 3456.080385] cpufreq-core: notification 1 of frequency transition to 800000 kHz
May 26 17:59:54 tarm kernel: [ 3456.080439] cpufreq-core: scaling loops_per_jiffy to 3195449 for frequency 800000 kHz
May 26 18:02:15 tarm kernel: [ 3597.291132] __ratelimit: 39 messages suppressed
May 26 18:02:15 tarm kernel: [ 3597.291342] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
May 26 18:02:15 tarm kernel: [ 3597.291480] cpufreq-core: updating policy for CPU 0
May 26 18:02:15 tarm kernel: [ 3597.291608] acpi-cpufreq: get_cur_freq_on_cpu (0)
May 26 18:02:15 tarm kernel: [ 3597.291734] acpi-cpufreq: get_cur_val = 100664850
May 26 18:02:15 tarm kernel: [ 3597.291859] acpi-cpufreq: cur freq = 800000
May 26 18:02:15 tarm kernel: [ 3597.291984] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 18:02:15 tarm kernel: [ 3597.292116] acpi-cpufreq: acpi_cpufreq_verify
May 26 18:02:15 tarm kernel: [ 3597.292241] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 18:02:15 tarm kernel: [ 3597.292377] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 18:02:15 tarm kernel: [ 3597.292546] acpi-cpufreq: acpi_cpufreq_verify
May 26 18:02:15 tarm kernel: [ 3597.292675] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 18:02:15 tarm kernel: [ 3597.292812] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 18:02:15 tarm kernel: [ 3597.293470] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
May 26 18:02:15 tarm kernel: [ 3597.293635] cpufreq-core: governor: change or update limits
May 26 18:02:15 tarm kernel: [ 3597.293768] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 18:02:17 tarm kernel: [ 3598.625022] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:02:17 tarm kernel: [ 3598.625266] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 18:02:17 tarm kernel: [ 3598.625404] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 18:02:17 tarm kernel: [ 3598.625541] freq-table: target is 0 (2000000 kHz, 0)
May 26 18:02:17 tarm kernel: [ 3598.625671] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 18:02:21 tarm kernel: [ 3602.625004] __ratelimit: 28 messages suppressed
May 26 18:02:21 tarm kernel: [ 3602.625238] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:02:26 tarm kernel: [ 3607.627568] __ratelimit: 39 messages suppressed
May 26 18:02:26 tarm kernel: [ 3607.627787] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:02:28 tarm kernel: [ 3609.767385] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 18:02:28 tarm kernel: [ 3609.767625] acpi-cpufreq: acpi_cpufreq_verify
May 26 18:02:28 tarm kernel: [ 3609.767757] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 18:02:28 tarm kernel: [ 3609.767895] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 18:02:28 tarm kernel: [ 3609.768031] acpi-cpufreq: acpi_cpufreq_verify
May 26 18:02:28 tarm kernel: [ 3609.768158] freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
May 26 18:02:28 tarm kernel: [ 3609.768294] freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
May 26 18:02:28 tarm kernel: [ 3609.768429] cpufreq-core: new min and max freqs are 800000 - 800000 kHz
May 26 18:02:28 tarm kernel: [ 3609.768561] cpufreq-core: governor: change or update limits
May 26 18:02:28 tarm kernel: [ 3609.768689] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 18:04:20 tarm kernel: [ 3721.943273] __ratelimit: 18 messages suppressed
May 26 18:04:20 tarm kernel: [ 3721.943484] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
May 26 18:04:20 tarm kernel: [ 3721.943624] cpufreq-core: updating policy for CPU 0
May 26 18:04:20 tarm kernel: [ 3721.943754] acpi-cpufreq: get_cur_freq_on_cpu (0)
May 26 18:04:20 tarm kernel: [ 3721.943883] acpi-cpufreq: get_cur_val = 100664850
May 26 18:04:20 tarm kernel: [ 3721.944010] acpi-cpufreq: cur freq = 800000
May 26 18:04:20 tarm kernel: [ 3721.944137] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 18:04:20 tarm kernel: [ 3721.944271] acpi-cpufreq: acpi_cpufreq_verify
May 26 18:04:20 tarm kernel: [ 3721.944418] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 18:04:20 tarm kernel: [ 3721.944556] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 18:04:20 tarm kernel: [ 3721.944691] acpi-cpufreq: acpi_cpufreq_verify
May 26 18:04:20 tarm kernel: [ 3721.944818] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 18:04:20 tarm kernel: [ 3721.945412] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 18:04:20 tarm kernel: [ 3721.945579] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
May 26 18:04:20 tarm kernel: [ 3721.945714] cpufreq-core: governor: change or update limits
May 26 18:04:20 tarm kernel: [ 3721.945845] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 18:04:29 tarm kernel: [ 3730.625003] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:04:29 tarm kernel: [ 3730.625247] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 18:04:29 tarm kernel: [ 3730.625405] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 18:04:29 tarm kernel: [ 3730.625545] freq-table: target is 0 (2000000 kHz, 0)
May 26 18:04:29 tarm kernel: [ 3730.625674] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 18:04:29 tarm kernel: [ 3730.625808] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 18:04:30 tarm kernel: [ 3732.125001] __ratelimit: 8 messages suppressed
May 26 18:04:30 tarm kernel: [ 3732.125223] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:05:01 tarm kernel: [ 3762.625004] __ratelimit: 27 messages suppressed
May 26 18:05:01 tarm kernel: [ 3762.625230] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:05:01 tarm kernel: [ 3762.625371] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 18:05:01 tarm kernel: [ 3762.625503] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 18:05:01 tarm kernel: [ 3762.625639] freq-table: target is 0 (2000000 kHz, 0)
May 26 18:05:01 tarm kernel: [ 3762.625767] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 18:05:01 tarm kernel: [ 3762.625996] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 18:05:05 tarm kernel: [ 3767.125001] __ratelimit: 34 messages suppressed
May 26 18:05:05 tarm kernel: [ 3767.125153] cpufreq-core: target for CPU 0: 457142 kHz, relation 0
May 26 18:05:11 tarm kernel: [ 3772.625012] __ratelimit: 53 messages suppressed
May 26 18:05:11 tarm kernel: [ 3772.625165] cpufreq-core: target for CPU 0: 685714 kHz, relation 0
May 26 18:05:14 tarm kernel: [ 3775.942575] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 18:05:14 tarm kernel: [ 3775.942722] acpi-cpufreq: acpi_cpufreq_verify
May 26 18:05:14 tarm kernel: [ 3775.942782] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 18:05:14 tarm kernel: [ 3775.942844] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 18:05:14 tarm kernel: [ 3775.942905] acpi-cpufreq: acpi_cpufreq_verify
May 26 18:05:14 tarm kernel: [ 3775.942961] freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
May 26 18:05:14 tarm kernel: [ 3775.943022] freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
May 26 18:05:14 tarm kernel: [ 3775.943082] cpufreq-core: new min and max freqs are 800000 - 800000 kHz
May 26 18:05:14 tarm kernel: [ 3775.943140] cpufreq-core: governor: change or update limits
May 26 18:05:14 tarm kernel: [ 3775.943197] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 18:05:14 tarm kernel: [ 3775.943255] cpufreq-core: target for CPU 0: 800000 kHz, relation 1
May 26 18:05:14 tarm kernel: [ 3775.943311] acpi-cpufreq: acpi_cpufreq_target 800000 (0)
May 26 18:05:14 tarm kernel: [ 3775.943369] freq-table: request for target 800000 kHz (relation: 1) for cpu 0
May 26 18:05:14 tarm kernel: [ 3775.943428] freq-table: target is 4 (800000 kHz, 4)
May 26 18:05:14 tarm kernel: [ 3775.943485] cpufreq-core: notification 0 of frequency transition to 800000 kHz
May 26 18:05:14 tarm kernel: [ 3775.943546] cpufreq-core: notification 1 of frequency transition to 800000 kHz
May 26 18:05:14 tarm kernel: [ 3775.943599] cpufreq-core: scaling loops_per_jiffy to 3195449 for frequency 800000 kHz
May 26 18:07:00 tarm kernel: [ 3881.874163] __ratelimit: 44 messages suppressed
May 26 18:07:00 tarm kernel: [ 3881.874373] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
May 26 18:07:00 tarm kernel: [ 3881.874512] cpufreq-core: updating policy for CPU 0
May 26 18:07:00 tarm kernel: [ 3881.874642] acpi-cpufreq: get_cur_freq_on_cpu (0)
May 26 18:07:00 tarm kernel: [ 3881.874770] acpi-cpufreq: get_cur_val = 100664850
May 26 18:07:00 tarm kernel: [ 3881.874896] acpi-cpufreq: cur freq = 800000
May 26 18:07:00 tarm kernel: [ 3881.875047] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 18:07:00 tarm kernel: [ 3881.875182] acpi-cpufreq: acpi_cpufreq_verify
May 26 18:07:00 tarm kernel: [ 3881.875310] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 18:07:00 tarm kernel: [ 3881.875447] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 18:07:00 tarm kernel: [ 3881.875583] acpi-cpufreq: acpi_cpufreq_verify
May 26 18:07:00 tarm kernel: [ 3881.875710] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 18:07:00 tarm kernel: [ 3881.875847] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 18:07:00 tarm kernel: [ 3881.875982] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
May 26 18:07:00 tarm kernel: [ 3881.876115] cpufreq-core: governor: change or update limits
May 26 18:07:00 tarm kernel: [ 3881.876243] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 18:07:01 tarm kernel: [ 3882.625011] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:07:01 tarm kernel: [ 3882.625258] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 18:07:01 tarm kernel: [ 3882.625399] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 18:07:01 tarm kernel: [ 3882.625541] freq-table: target is 0 (2000000 kHz, 0)
May 26 18:07:01 tarm kernel: [ 3882.625675] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 18:07:18 tarm kernel: [ 3899.625001] __ratelimit: 16 messages suppressed
May 26 18:07:18 tarm kernel: [ 3899.625229] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:07:18 tarm kernel: [ 3899.625400] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 18:07:18 tarm kernel: [ 3899.625536] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 18:09:01 tarm kernel: [ 4003.125000] __ratelimit: 11 messages suppressed
May 26 18:09:01 tarm kernel: [ 4003.125219] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:09:01 tarm kernel: [ 4003.125383] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 18:09:01 tarm kernel: [ 4003.125518] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 18:09:01 tarm kernel: [ 4003.125655] freq-table: target is 0 (2000000 kHz, 0)
May 26 18:09:01 tarm kernel: [ 4003.125785] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 18:09:01 tarm kernel: [ 4003.125920] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 18:09:01 tarm kernel: [ 4003.125974] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 18:09:02 tarm kernel: [ 4003.624990] cpufreq-core: target for CPU 0: 457142 kHz, relation 0
May 26 18:09:02 tarm kernel: [ 4003.625144] acpi-cpufreq: acpi_cpufreq_target 457142 (0)
May 26 18:09:02 tarm kernel: [ 4003.625219] freq-table: request for target 457142 kHz (relation: 0) for cpu 0
May 26 18:09:13 tarm kernel: [ 4014.625002] __ratelimit: 4 messages suppressed
May 26 18:09:13 tarm kernel: [ 4014.625228] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:09:13 tarm kernel: [ 4014.625394] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 18:09:47 tarm kernel: [ 4048.625002] __ratelimit: 19 messages suppressed
May 26 18:09:47 tarm kernel: [ 4048.625223] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:09:47 tarm kernel: [ 4048.625389] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 18:09:47 tarm kernel: [ 4048.625524] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 18:09:47 tarm kernel: [ 4048.625661] freq-table: target is 0 (2000000 kHz, 0)
May 26 18:09:47 tarm kernel: [ 4048.625791] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 18:09:47 tarm kernel: [ 4048.625926] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 18:09:47 tarm kernel: [ 4048.625990] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 18:09:52 tarm kernel: [ 4053.626605] __ratelimit: 33 messages suppressed
May 26 18:09:52 tarm kernel: [ 4053.626791] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:09:58 tarm kernel: [ 4060.133318] __ratelimit: 20 messages suppressed
May 26 18:09:58 tarm kernel: [ 4060.133559] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:10:01 tarm kernel: [ 4063.125021] __ratelimit: 13 messages suppressed
May 26 18:10:01 tarm kernel: [ 4063.125262] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:10:06 tarm kernel: [ 4068.125460] __ratelimit: 13 messages suppressed
May 26 18:10:06 tarm kernel: [ 4068.125699] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:10:12 tarm kernel: [ 4074.125037] __ratelimit: 20 messages suppressed
May 26 18:10:12 tarm kernel: [ 4074.125255] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:10:18 tarm kernel: [ 4079.626878] __ratelimit: 13 messages suppressed
May 26 18:10:18 tarm kernel: [ 4079.627098] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:10:24 tarm kernel: [ 4086.133059] __ratelimit: 20 messages suppressed
May 26 18:10:24 tarm kernel: [ 4086.133274] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:10:27 tarm kernel: [ 4088.624999] __ratelimit: 11 messages suppressed
May 26 18:10:27 tarm kernel: [ 4088.625151] cpufreq-core: target for CPU 0: 1142857 kHz, relation 0
May 26 18:10:32 tarm kernel: [ 4093.625002] __ratelimit: 27 messages suppressed
May 26 18:10:32 tarm kernel: [ 4093.625227] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:10:34 tarm kernel: [ 4095.755272] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 18:10:34 tarm kernel: [ 4095.755508] acpi-cpufreq: acpi_cpufreq_verify
May 26 18:10:34 tarm kernel: [ 4095.755642] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 18:10:34 tarm kernel: [ 4095.755780] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 18:10:34 tarm kernel: [ 4095.755916] acpi-cpufreq: acpi_cpufreq_verify
May 26 18:10:34 tarm kernel: [ 4095.756042] freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
May 26 18:10:34 tarm kernel: [ 4095.756179] freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
May 26 18:10:34 tarm kernel: [ 4095.756314] cpufreq-core: new min and max freqs are 800000 - 800000 kHz
May 26 18:10:34 tarm kernel: [ 4095.756447] cpufreq-core: governor: change or update limits
May 26 18:10:34 tarm kernel: [ 4095.756575] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 18:12:34 tarm kernel: [ 4216.175207] __ratelimit: 39 messages suppressed
May 26 18:12:34 tarm kernel: [ 4216.175414] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
May 26 18:12:34 tarm kernel: [ 4216.175553] cpufreq-core: updating policy for CPU 0
May 26 18:12:34 tarm kernel: [ 4216.175682] acpi-cpufreq: get_cur_freq_on_cpu (0)
May 26 18:12:34 tarm kernel: [ 4216.175809] acpi-cpufreq: get_cur_val = 100664850
May 26 18:12:34 tarm kernel: [ 4216.175936] acpi-cpufreq: cur freq = 800000
May 26 18:12:34 tarm kernel: [ 4216.176061] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
May 26 18:12:34 tarm kernel: [ 4216.176194] acpi-cpufreq: acpi_cpufreq_verify
May 26 18:12:34 tarm kernel: [ 4216.176322] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 18:12:34 tarm kernel: [ 4216.176458] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 18:12:34 tarm kernel: [ 4216.176592] acpi-cpufreq: acpi_cpufreq_verify
May 26 18:12:34 tarm kernel: [ 4216.176719] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
May 26 18:12:34 tarm kernel: [ 4216.176856] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
May 26 18:12:34 tarm kernel: [ 4216.177405] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
May 26 18:12:34 tarm kernel: [ 4216.177565] cpufreq-core: governor: change or update limits
May 26 18:12:34 tarm kernel: [ 4216.177696] cpufreq-core: __cpufreq_governor for CPU 0, event 3
May 26 18:12:49 tarm kernel: [ 4230.625012] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:12:49 tarm kernel: [ 4230.625277] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 18:12:49 tarm kernel: [ 4230.625421] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 18:12:49 tarm kernel: [ 4230.625563] freq-table: target is 0 (2000000 kHz, 0)
May 26 18:12:49 tarm kernel: [ 4230.625698] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
May 26 18:12:49 tarm kernel: [ 4230.625838] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
May 26 18:12:49 tarm kernel: [ 4230.625904] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
May 26 18:13:00 tarm kernel: [ 4241.624998] __ratelimit: 7 messages suppressed
May 26 18:13:00 tarm kernel: [ 4241.625219] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:13:00 tarm kernel: [ 4241.625384] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
May 26 18:13:00 tarm kernel: [ 4241.625519] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
May 26 18:13:14 tarm kernel: [ 4255.624998] __ratelimit: 37 messages suppressed
May 26 18:13:14 tarm kernel: [ 4255.625224] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
May 26 18:13:14 tarm kernel: [ 4255.625391] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)


>
>    Thomas
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/



-- 
Arkadiusz Miśkiewicz        PLD/Linux Team
arekm / maven.pl            http://ftp.pld-linux.org/

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: cpufreq limits avilable frequencies to 800MHz on git kernel
  2008-05-26 16:15         ` Arkadiusz Miskiewicz
@ 2008-05-26 16:23           ` Arkadiusz Miskiewicz
  2008-07-17 13:48             ` [PATCH] " Thomas Renninger
  2008-05-27  9:35           ` Thomas Renninger
  1 sibling, 1 reply; 7+ messages in thread
From: Arkadiusz Miskiewicz @ 2008-05-26 16:23 UTC (permalink / raw)
  To: linux-kernel; +Cc: trenn, cpufreq, Andrew Morton, gnorton, miguel, linux-acpi

On Monday 26 May 2008, Arkadiusz Miskiewicz wrote:
> On Monday 26 May 2008, Thomas Renninger wrote:
> > On Mon, 2008-05-26 at 09:07 +0200, Arkadiusz Miskiewicz wrote:
> > > On Sunday 25 May 2008, Thomas Renninger wrote:
> > > > On Sun, 2008-05-25 at 11:36 +0200, Arkadiusz Miskiewicz wrote:
> > > > > On Saturday 24 May 2008, Andrew Morton wrote:
> > > > > > On Fri, 23 May 2008 19:44:57 +0200 Arkadiusz Miskiewicz
> > > > > > <arekm@maven.pl>
> > > > >
> > > > > wrote:
> > > > > > > thinkpad z60m, Intel(R) Pentium(R) M processor 2.00GHz. kernel
> > > > > > > from git from 1-2 days ago.
> > > > > > >
> > > > > > > Unfortunately it seems that suspend to ram/resume causes
> > > > > > > frequency to be limited to 800MHz only. I can't set it to 2GHz
> > > > > > > again :-/
> > > > > > >
> > > > > > > scaling_max_freq is then 800000 and cannot be changed.
> > > > > > >
> > > > > > > reboot and the problem disappears until new suspend/resume
> > > > > > > cycle.
> > > > > > >
> > > > > > > cpufreq stuff is driven by acpi-cpufreq
> > > > > > >
> > > > > > > $ cpufreq-info
> > > > > > > cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006
> > > > > > > Report errors and bugs to linux@brodo.de, please.
> > > > > > > analyzing CPU 0:
> > > > > > >   driver: acpi-cpufreq
> > > > > > >   CPUs which need to switch frequency at the same time: 0
> > > > > > >   hardware limits: 800 MHz - 2.00 GHz
> > > > > > >   available frequency steps: 2.00 GHz, 1.60 GHz, 1.33 GHz, 1.07
> > > > > > > GHz, 800 MHz available cpufreq governors: powersave, userspace,
> > > > > > > ondemand, performance current policy: frequency should be
> > > > > > > within 800 MHz and 800 MHz. The governor "performance" may
> > > > > > > decide which speed to use within this range.
> > > > > > >   current CPU frequency is 800 MHz.
> > > > > > >
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/affected_cpus:0
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq:800000
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq:2000000
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq:800000
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/related_cpus:0
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequenc
> > > > > > >ie s:20 0000 0 1600000 1333000 1066000 800000
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governor
> > > > > > >s: powe rsav e userspace ondemand performance
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq:800000
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver:acpi-cpufre
> > > > > > >q
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor:performan
> > > > > > >ce /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq:800000
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq:800000
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed:<unsuppor
> > > > > > >te d>
> > > > > >
> > > > > > Thanks.  Is this a newly-occurring bug or did earlier kernels do
> > > > > > this also?
> > > > > >
> > > > > > If it was newly added, do you know in which kernel version we
> > > > > > might have added it?
> > > > >
> > > > > I wasn't able to reproduce the problem on final 2.6.24 but was able
> > > > > to reproduce on final 2.6.25. Problem introduced somewhere between
> > > > > it seems.
> > > > >
> > > > > Note that 2-3 suspend to ram/resume cycles is needed to get into
> > > > > the problem.
> > > >
> > > > Sounds related to:
> > > > [Bug 374099] T61p speedstep problems (ondemand scheduler)
> > > > https://bugzilla.novell.com/show_bug.cgi?id=374099
> > >
> > > login/pass protected
> > >
> > > > Miguel speaks from "good boots" and "bad boots".
> > >
> > > Actually I also got "bad boot" (so no suspend/resume was needed).
> > >
> > > > Could you check whether the OS thinks it is too hot.
> > > > I described some basics how to monitor temperature and cpufreq (if
> > > > passive cooling kicks in) here:
> > > > https://bugzilla.novell.com/show_bug.cgi?id=387702#c13
> > >
> > > Doesn't seem to be overheated
> > >
> > > [arekm@tarm ~]$ cat
> > > /proc/acpi/thermal_zone/*/{temperature,trip_points,state}; cat
> > > /sys/devices/system/cpu/cpu*/cpufreq/scaling_{cur_freq,max_freq}
> > > temperature:             45 C
> > > critical (S5):           99 C
> > > passive:                 95 C: tc1=5 tc2=4 tsp=600 devices= CPU
> > > state:                   ok
> > > 800000
> > > 800000
> > >
> > > but still limited to 800MHz.
> > >
> > > > Hmm, it may just have been fixed by this one:
> > > > commit e56a727b023d40d1adf660168883f30f2e6abe0a
> > > > Author: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
> > > > Date:   Mon Apr 28 15:13:43 2008 -0400
> > > >
> > > > Miguel, Geoff: This is already in 11.0 for some time and in 10.3 for
> > > > some days.
> > >
> > > Unfortunately it doesn't fix the problem. The patch is in Linus tree
> > > for long time (so I guess I had it when initially reporting the
> > > problem) + I upgraded today to current git - the problem is still
> > > there.
> >
> > Yep, Dells and some HP should be fixed, it would have been strange if
> > ThinkPads are now also affected, but thanks for double checking, it
> > shows the same symptoms.
> >
> > Then it might be _PPC.
> > If you compile in CPUFREQ_DEBUG and add the boot param:
> > cpufreq.debug=7
> > you should see a message in dmesg (if you do not see one, then
> > everything is fine you have a "good boot" and freq should be at max?):
> > cpufreq_printk("CPU %d: _PPC is %d - frequency %s limited\n", pr->id,
> >                        (int)ppc, ppc ? "" : "not");
> >
> > If PPC is zero all frequencies are allowed, if it is one max_freq will
> > be set to the second highest freq, etc.
> >
> > If it's that you can workaround that (temporarily, pls help evaluating
> > this further) you can use:
> > processor.ignore_ppc=1
> >
> > I remember Ingo Molnar sent a patch to not always evaluate _PPC at
> > boot/initialization time, but only on processor notification events.
> > AFAIK this was a recent ThinkPad, so this might be it what you are
> > seeing. But nobody knew why some ThinkPads had a wrong _PPC value at
> > initialization time.
> >
> > If this is PPC related, this is more an ACPI than a cpufreq issue ->
> > adding linux-acpi list.
>
> Ok, there is something, see:
>
> [ 4093.625227] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> [ 4095.755272] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000
> kHz [ 4095.755508] acpi-cpufreq: acpi_cpufreq_verify
> [ 4095.755642] freq-table: request for verification of policy (800000 -
> 2000000 kHz) for cpu 0 [ 4095.755780] freq-table: verification lead to
> (800000 - 2000000 kHz) for cpu 0 [ 4095.755916] acpi-cpufreq:
> acpi_cpufreq_verify
> [ 4095.756042] freq-table: request for verification of policy (800000 -
> 800000 kHz) for cpu 0 [ 4095.756179] freq-table: verification lead to
> (800000 - 800000 kHz) for cpu 0 [ 4095.756314] cpufreq-core: new min and
> max freqs are 800000 - 800000 kHz

and later back to 2GHz



[ 4095.756042] freq-table: request for verification of policy (800000 - 800000 
kHz) for cpu 0
[ 4095.756179] freq-table: verification lead to (800000 - 800000 kHz) for cpu 
0
[ 4095.756314] cpufreq-core: new min and max freqs are 800000 - 800000 kHz
[ 4095.756447] cpufreq-core: governor: change or update limits
[ 4095.756575] cpufreq-core: __cpufreq_governor for CPU 0, event 3
[ 4216.175207] __ratelimit: 39 messages suppressed
[ 4216.175414] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
[ 4216.175553] cpufreq-core: updating policy for CPU 0
[ 4216.175682] acpi-cpufreq: get_cur_freq_on_cpu (0)
[ 4216.175809] acpi-cpufreq: get_cur_val = 100664850
[ 4216.175936] acpi-cpufreq: cur freq = 800000
[ 4216.176061] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 
kHz
[ 4216.176194] acpi-cpufreq: acpi_cpufreq_verify
[ 4216.176322] freq-table: request for verification of policy (800000 - 
2000000 kHz) for cpu 0
[ 4216.176458] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 
0
[ 4216.176592] acpi-cpufreq: acpi_cpufreq_verify
[ 4216.176719] freq-table: request for verification of policy (800000 - 
2000000 kHz) for cpu 0
[ 4216.176856] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 
0
[ 4216.177405] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
[ 4216.177565] cpufreq-core: governor: change or update limits
[ 4216.177696] cpufreq-core: __cpufreq_governor for CPU 0, event 3
[ 4230.625012] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
[ 4230.625277] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
[ 4230.625421] freq-table: request for target 2000000 kHz (relation: 1) for 
cpu 0
[ 4230.625563] freq-table: target is 0 (2000000 kHz, 0)
[ 4230.625698] cpufreq-core: notification 0 of frequency transition to 2000000 
kHz
[ 4230.625838] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 
2000000 kHz
[ 4230.625904] cpufreq-core: notification 1 of frequency transition to 2000000 
kHz
[ 4241.624998] __ratelimit: 7 messages suppressed


then back again to 800MHz and back to 2GHz

[ 4313.125215] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
[ 4315.821316] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 
kHz
[ 4315.821465] acpi-cpufreq: acpi_cpufreq_verify
[ 4315.821525] freq-table: request for verification of policy (800000 - 
2000000 kHz) for cpu 0
[ 4315.821587] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 
0
[ 4315.821648] acpi-cpufreq: acpi_cpufreq_verify
[ 4315.821705] freq-table: request for verification of policy (800000 - 800000 
kHz) for cpu 0
[ 4315.821765] freq-table: verification lead to (800000 - 800000 kHz) for cpu 
0
[ 4315.821826] cpufreq-core: new min and max freqs are 800000 - 800000 kHz
[ 4315.821885] cpufreq-core: governor: change or update limits
[ 4315.821942] cpufreq-core: __cpufreq_governor for CPU 0, event 3
[ 4315.822000] cpufreq-core: target for CPU 0: 800000 kHz, relation 1
[ 4315.822080] acpi-cpufreq: acpi_cpufreq_target 800000 (0)
[ 4315.822138] freq-table: request for target 800000 kHz (relation: 1) for cpu 
0
[ 4315.822197] freq-table: target is 4 (800000 kHz, 4)
[ 4315.822255] cpufreq-core: notification 0 of frequency transition to 800000 
kHz
[ 4315.822316] cpufreq-core: notification 1 of frequency transition to 800000 
kHz
[ 4315.822370] cpufreq-core: scaling loops_per_jiffy to 3195449 for frequency 
800000 kHz
[ 4459.098165] __ratelimit: 44 messages suppressed
[ 4459.098394] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
[ 4459.098534] cpufreq-core: updating policy for CPU 0
[ 4459.098663] acpi-cpufreq: get_cur_freq_on_cpu (0)
[ 4459.098791] acpi-cpufreq: get_cur_val = 100664850
[ 4459.098918] acpi-cpufreq: cur freq = 800000
[ 4459.099044] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 
kHz
[ 4459.099177] acpi-cpufreq: acpi_cpufreq_verify
[ 4459.099321] freq-table: request for verification of policy (800000 - 
2000000 kHz) for cpu 0
[ 4459.099458] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 
0


-- 
Arkadiusz Miśkiewicz        PLD/Linux Team
arekm / maven.pl            http://ftp.pld-linux.org/
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH] Re: cpufreq limits avilable frequencies to 800MHz on git kernel
  2008-05-26 16:23           ` Arkadiusz Miskiewicz
@ 2008-07-17 13:48             ` Thomas Renninger
  2008-07-17 21:40               ` Andrew Morton
  0 siblings, 1 reply; 7+ messages in thread
From: Thomas Renninger @ 2008-07-17 13:48 UTC (permalink / raw)
  To: Arkadiusz Miskiewicz
  Cc: linux-kernel, cpufreq, Andrew Morton, gnorton, miguel, linux-acpi,
	Dave Jones

Hi,

maybe I found something..., can someone review/test this.

Thanks,

         Thomas

------------
CPUFREQ ACPI: Only call _PPC after cpufreq ACPI init funcs got called already

Ingo Molnar provided a fix to not call _PPC at processor driver initialization 
time.
Git commit #e4233dec749a3519069d9390561b5636a75c7579

But it can still happen that _PPC is called at  processor driver 
initialization time.

This patch should make sure that this is not possible anymore.

Signed-off-by: Thomas Renninger <trenn@suse.de>
---
 arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c |    6 ++++++
 drivers/acpi/processor_perflib.c              |   13 ++++++++++++-
 drivers/cpufreq/cpufreq.c                     |    3 +++
 include/linux/cpufreq.h                       |    1 +
 4 files changed, 22 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c 
b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
index 69288f6..3233fe8 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
+++ b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
@@ -96,6 +96,12 @@ static int pmi_notifier(struct notifier_block *nb,
 	struct cpufreq_frequency_table *cbe_freqs;
 	u8 node;
 
+	/* Should this really be called for CPUFREQ_ADJUST, CPUFREQ_INCOMPATIBLE
+	 * and CPUFREQ_NOTIFY policy events?)
+	 */
+	if (event == CPUFREQ_START)
+		return 0;
+
 	cbe_freqs = cpufreq_frequency_get_table(policy->cpu);
 	node = cbe_cpu_to_node(policy->cpu);
 
diff --git a/drivers/acpi/processor_perflib.c 
b/drivers/acpi/processor_perflib.c
index b474996..63ccf80 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -72,7 +72,13 @@ MODULE_PARM_DESC(ignore_ppc, "If the frequency of your 
machine gets wrongly" \
 #define PPC_REGISTERED   1
 #define PPC_IN_USE       2
 
-static int acpi_processor_ppc_status = 0;
+/* ignore_ppc:
+ * -1 -> cpufreq low level drivers not initialized -> _PSS, etc. not called 
yet
+ *       ignore _PPC
+ *  0 -> cpufreq low level drivers initialized -> consider _PPC values
+ *  1 -> ignore _PPC totally -> forced by user through boot param
+ */
+static int acpi_processor_ppc_status = -1;
 
 static int acpi_processor_ppc_notifier(struct notifier_block *nb,
 				       unsigned long event, void *data)
@@ -81,6 +87,11 @@ static int acpi_processor_ppc_notifier(struct 
notifier_block *nb,
 	struct acpi_processor *pr;
 	unsigned int ppc = 0;
 
+	if (event == CPUFREQ_START && ignore_ppc <= 0) {
+		ignore_ppc = 0;
+		return 0;
+	}
+
 	if (ignore_ppc)
 		return 0;
 
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 1d41496..0471ef5 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -825,6 +825,9 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 	policy->user_policy.min = policy->cpuinfo.min_freq;
 	policy->user_policy.max = policy->cpuinfo.max_freq;
 
+	blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
+				     CPUFREQ_START, policy);
+
 #ifdef CONFIG_SMP
 
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index e7e91db..07cb761 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -109,6 +109,7 @@ struct cpufreq_policy {
 #define CPUFREQ_ADJUST		(0)
 #define CPUFREQ_INCOMPATIBLE	(1)
 #define CPUFREQ_NOTIFY		(2)
+#define CPUFREQ_START		(3)
 
 #define CPUFREQ_SHARED_TYPE_NONE (0) /* None */
 #define CPUFREQ_SHARED_TYPE_HW	 (1) /* HW does needed coordination */
-- 
1.5.4.5


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: [PATCH] Re: cpufreq limits avilable frequencies to 800MHz on git kernel
  2008-07-17 13:48             ` [PATCH] " Thomas Renninger
@ 2008-07-17 21:40               ` Andrew Morton
  2008-07-18  2:46                 ` Thomas Renninger
  0 siblings, 1 reply; 7+ messages in thread
From: Andrew Morton @ 2008-07-17 21:40 UTC (permalink / raw)
  To: Thomas Renninger
  Cc: arekm, linux-kernel, cpufreq, gnorton, miguel, linux-acpi, davej,
	stable

On Thu, 17 Jul 2008 15:48:02 +0200
Thomas Renninger <trenn@suse.de> wrote:

> Hi,
> 
> maybe I found something..., can someone review/test this.
> 
> Thanks,
> 
>          Thomas
> 
> ------------
> CPUFREQ ACPI: Only call _PPC after cpufreq ACPI init funcs got called already
> 
> Ingo Molnar provided a fix to not call _PPC at processor driver initialization 
> time.
> Git commit #e4233dec749a3519069d9390561b5636a75c7579
> 
> But it can still happen that _PPC is called at  processor driver 
> initialization time.
> 
> This patch should make sure that this is not possible anymore.

There is no actual description of what this fixes, is there?  Do
machines go oops, or what?

How do we proceed from here with this patch?  Who should review it, who
should test it, who should ack it and who should merge it?

e4233dec749a3519069d9390561b5636a75c7579 was in January so this patch
is applicable to 2.6.25.x and to 2.6.26.x.  But is it needed there? 
Insufficient info.

Ho hum.  I queued it, tagged as needed-in-2.6.25.x and 2.6.26.x.  But I
am unsure about that.

Please help to clarify these things.

> Signed-off-by: Thomas Renninger <trenn@suse.de>
> ---
>  arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c |    6 ++++++
>  drivers/acpi/processor_perflib.c              |   13 ++++++++++++-
>  drivers/cpufreq/cpufreq.c                     |    3 +++
>  include/linux/cpufreq.h                       |    1 +
>  4 files changed, 22 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c 
> b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
> index 69288f6..3233fe8 100644
> --- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
> +++ b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
> @@ -96,6 +96,12 @@ static int pmi_notifier(struct notifier_block *nb,
>  	struct cpufreq_frequency_table *cbe_freqs;
>  	u8 node;
>  
> +	/* Should this really be called for CPUFREQ_ADJUST, CPUFREQ_INCOMPATIBLE
> +	 * and CPUFREQ_NOTIFY policy events?)
> +	 */
> +	if (event == CPUFREQ_START)
> +		return 0;
> +
>  	cbe_freqs = cpufreq_frequency_get_table(policy->cpu);
>  	node = cbe_cpu_to_node(policy->cpu);
>  
> diff --git a/drivers/acpi/processor_perflib.c 
> b/drivers/acpi/processor_perflib.c
> index b474996..63ccf80 100644
> --- a/drivers/acpi/processor_perflib.c
> +++ b/drivers/acpi/processor_perflib.c
> @@ -72,7 +72,13 @@ MODULE_PARM_DESC(ignore_ppc, "If the frequency of your 
> machine gets wrongly" \
>  #define PPC_REGISTERED   1
>  #define PPC_IN_USE       2
>  
> -static int acpi_processor_ppc_status = 0;
> +/* ignore_ppc:
> + * -1 -> cpufreq low level drivers not initialized -> _PSS, etc. not called 
> yet

I am going to start hanging around in dark alleys in the hope of
meeting the person who invented wordwrapping.


Here it is again, fixed:


From: Thomas Renninger <trenn@suse.de>

Ingo Molnar provided a fix to not call _PPC at processor driver
initialization time.  Git commit #e4233dec749a3519069d9390561b5636a75c7579

But it can still happen that _PPC is called at processor driver
initialization time.

This patch should make sure that this is not possible anymore.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Cc: Dave Jones <davej@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Chandra Seetharaman <sekharan@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Arkadiusz Miskiewicz <arekm@maven.pl>
Cc: <gnorton@novell.com>
Cc: <miguel@novell.com>
Cc: <stable@kernel.org>		[2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c |    6 ++++++
 drivers/acpi/processor_perflib.c              |   13 ++++++++++++-
 drivers/cpufreq/cpufreq.c                     |    3 +++
 include/linux/cpufreq.h                       |    1 +
 4 files changed, 22 insertions(+), 1 deletion(-)

diff -puN arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c~cpufreq-acpi-only-call-_ppc-after-cpufreq-acpi-init-funcs-got-called-already arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
--- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c~cpufreq-acpi-only-call-_ppc-after-cpufreq-acpi-init-funcs-got-called-already
+++ a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
@@ -96,6 +96,12 @@ static int pmi_notifier(struct notifier_
 	struct cpufreq_frequency_table *cbe_freqs;
 	u8 node;
 
+	/* Should this really be called for CPUFREQ_ADJUST, CPUFREQ_INCOMPATIBLE
+	 * and CPUFREQ_NOTIFY policy events?)
+	 */
+	if (event == CPUFREQ_START)
+		return 0;
+
 	cbe_freqs = cpufreq_frequency_get_table(policy->cpu);
 	node = cbe_cpu_to_node(policy->cpu);
 
diff -puN drivers/acpi/processor_perflib.c~cpufreq-acpi-only-call-_ppc-after-cpufreq-acpi-init-funcs-got-called-already drivers/acpi/processor_perflib.c
--- a/drivers/acpi/processor_perflib.c~cpufreq-acpi-only-call-_ppc-after-cpufreq-acpi-init-funcs-got-called-already
+++ a/drivers/acpi/processor_perflib.c
@@ -72,7 +72,13 @@ MODULE_PARM_DESC(ignore_ppc, "If the fre
 #define PPC_REGISTERED   1
 #define PPC_IN_USE       2
 
-static int acpi_processor_ppc_status = 0;
+/* ignore_ppc:
+ * -1 -> cpufreq low level drivers not initialized -> _PSS, etc. not called yet
+ *       ignore _PPC
+ *  0 -> cpufreq low level drivers initialized -> consider _PPC values
+ *  1 -> ignore _PPC totally -> forced by user through boot param
+ */
+static int acpi_processor_ppc_status = -1;
 
 static int acpi_processor_ppc_notifier(struct notifier_block *nb,
 				       unsigned long event, void *data)
@@ -81,6 +87,11 @@ static int acpi_processor_ppc_notifier(s
 	struct acpi_processor *pr;
 	unsigned int ppc = 0;
 
+	if (event == CPUFREQ_START && ignore_ppc <= 0) {
+		ignore_ppc = 0;
+		return 0;
+	}
+
 	if (ignore_ppc)
 		return 0;
 
diff -puN drivers/cpufreq/cpufreq.c~cpufreq-acpi-only-call-_ppc-after-cpufreq-acpi-init-funcs-got-called-already drivers/cpufreq/cpufreq.c
--- a/drivers/cpufreq/cpufreq.c~cpufreq-acpi-only-call-_ppc-after-cpufreq-acpi-init-funcs-got-called-already
+++ a/drivers/cpufreq/cpufreq.c
@@ -825,6 +825,9 @@ static int cpufreq_add_dev(struct sys_de
 	policy->user_policy.min = policy->cpuinfo.min_freq;
 	policy->user_policy.max = policy->cpuinfo.max_freq;
 
+	blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
+				     CPUFREQ_START, policy);
+
 #ifdef CONFIG_SMP
 
 #ifdef CONFIG_HOTPLUG_CPU
diff -puN include/linux/cpufreq.h~cpufreq-acpi-only-call-_ppc-after-cpufreq-acpi-init-funcs-got-called-already include/linux/cpufreq.h
--- a/include/linux/cpufreq.h~cpufreq-acpi-only-call-_ppc-after-cpufreq-acpi-init-funcs-got-called-already
+++ a/include/linux/cpufreq.h
@@ -106,6 +106,7 @@ struct cpufreq_policy {
 #define CPUFREQ_ADJUST		(0)
 #define CPUFREQ_INCOMPATIBLE	(1)
 #define CPUFREQ_NOTIFY		(2)
+#define CPUFREQ_START		(3)
 
 #define CPUFREQ_SHARED_TYPE_NONE (0) /* None */
 #define CPUFREQ_SHARED_TYPE_HW	 (1) /* HW does needed coordination */
_


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH] Re: cpufreq limits avilable frequencies to 800MHz on git kernel
  2008-07-17 21:40               ` Andrew Morton
@ 2008-07-18  2:46                 ` Thomas Renninger
  0 siblings, 0 replies; 7+ messages in thread
From: Thomas Renninger @ 2008-07-18  2:46 UTC (permalink / raw)
  To: Andrew Morton
  Cc: arekm, linux-kernel, cpufreq, gnorton, miguel, linux-acpi, davej,
	stable

On Thursday 17 July 2008 11:40:00 pm Andrew Morton wrote:
> On Thu, 17 Jul 2008 15:48:02 +0200
>
> Thomas Renninger <trenn@suse.de> wrote:
> > Hi,
> >
> > maybe I found something..., can someone review/test this.
> >
> > Thanks,
> >
> >          Thomas
> >
> > ------------
> > CPUFREQ ACPI: Only call _PPC after cpufreq ACPI init funcs got called
> > already
> >
> > Ingo Molnar provided a fix to not call _PPC at processor driver
> > initialization time.
> > Git commit #e4233dec749a3519069d9390561b5636a75c7579
> >
> > But it can still happen that _PPC is called at  processor driver
> > initialization time.
> >
> > This patch should make sure that this is not possible anymore.
>
> There is no actual description of what this fixes, is there?  Do
> machines go oops, or what?
ThinkPads get stuck at lowest frequency.
A very nasty bug, reported several times recently.
This seem to show up rarely, not 100% reproducable (after every X boot...).
I do not know whether this one really fixes it. I saw an interesting debug
output on the cpufreq list recently pointing in this direction.
Even if it's not this, only calling _PPC after other initial cpufreq ACPI 
functions like _PDC or _PSS have been called (means cpufreq is really active) 
is a good idea. _PPC functions often have a complex logic. They might depend
on variables initialized in e.g. in _PDC or _PSS...
>
> How do we proceed from here with this patch?  Who should review it, who
> should test it, who should ack it and who should merge it?
I hope that Dave or someone on cpufreq list is having a look at it.
Dave should take it if it's fine.
People seeing this are in CC. After a quick review (patches are short..), I 
can provide an rpm for SUSE people (there is a SUSE and a kernel bug open)
https://bugzilla.novell.com/show_bug.cgi?id=374099

>
> e4233dec749a3519069d9390561b5636a75c7579 was in January so this patch
> is applicable to 2.6.25.x and to 2.6.26.x.  But is it needed there?
Probably should go in through .27 after review/testing.

> Insufficient info.
>
> Ho hum.  I queued it, tagged as needed-in-2.6.25.x and 2.6.26.x.  But I
> am unsure about that.
>
> Please help to clarify these things.
>
> > Signed-off-by: Thomas Renninger <trenn@suse.de>
> > ---
> >  arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c |    6 ++++++
> >  drivers/acpi/processor_perflib.c              |   13 ++++++++++++-
> >  drivers/cpufreq/cpufreq.c                     |    3 +++
> >  include/linux/cpufreq.h                       |    1 +
> >  4 files changed, 22 insertions(+), 1 deletions(-)
> >
> > diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
> > b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
> > index 69288f6..3233fe8 100644
> > --- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
> > +++ b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
> > @@ -96,6 +96,12 @@ static int pmi_notifier(struct notifier_block *nb,
> >  	struct cpufreq_frequency_table *cbe_freqs;
> >  	u8 node;
> >
> > +	/* Should this really be called for CPUFREQ_ADJUST,
> > CPUFREQ_INCOMPATIBLE +	 * and CPUFREQ_NOTIFY policy events?)
> > +	 */
> > +	if (event == CPUFREQ_START)
> > +		return 0;
> > +
> >  	cbe_freqs = cpufreq_frequency_get_table(policy->cpu);
> >  	node = cbe_cpu_to_node(policy->cpu);
> >
> > diff --git a/drivers/acpi/processor_perflib.c
> > b/drivers/acpi/processor_perflib.c
> > index b474996..63ccf80 100644
> > --- a/drivers/acpi/processor_perflib.c
> > +++ b/drivers/acpi/processor_perflib.c
> > @@ -72,7 +72,13 @@ MODULE_PARM_DESC(ignore_ppc, "If the frequency of your
> > machine gets wrongly" \
> >  #define PPC_REGISTERED   1
> >  #define PPC_IN_USE       2
> >
> > -static int acpi_processor_ppc_status = 0;
> > +/* ignore_ppc:
> > + * -1 -> cpufreq low level drivers not initialized -> _PSS, etc. not
> > called yet
>
> I am going to start hanging around in dark alleys in the hope of
> meeting the person who invented wordwrapping.
Sorry about that, I moved to kmail recently, still do not know how this could 
happen...

         Thomas
>
>
> Here it is again, fixed:
>
>
> From: Thomas Renninger <trenn@suse.de>
>
> Ingo Molnar provided a fix to not call _PPC at processor driver
> initialization time.  Git commit #e4233dec749a3519069d9390561b5636a75c7579
>
> But it can still happen that _PPC is called at processor driver
> initialization time.
>
> This patch should make sure that this is not possible anymore.
>
> Signed-off-by: Thomas Renninger <trenn@suse.de>
> Cc: Dave Jones <davej@redhat.com>
> Cc: Len Brown <len.brown@intel.com>
> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
> Cc: Chandra Seetharaman <sekharan@us.ibm.com>
> Cc: Ingo Molnar <mingo@elte.hu>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Cc: Arkadiusz Miskiewicz <arekm@maven.pl>
> Cc: <gnorton@novell.com>
> Cc: <miguel@novell.com>
> Cc: <stable@kernel.org>		[2.6.25.x, 2.6.26.x]
> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
> ---
>
>  arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c |    6 ++++++
>  drivers/acpi/processor_perflib.c              |   13 ++++++++++++-
>  drivers/cpufreq/cpufreq.c                     |    3 +++
>  include/linux/cpufreq.h                       |    1 +
>  4 files changed, 22 insertions(+), 1 deletion(-)
>
> diff -puN
> arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c~cpufreq-acpi-only-call-_ppc-a
>fter-cpufreq-acpi-init-funcs-got-called-already
> arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c ---
> a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c~cpufreq-acpi-only-call-_ppc
>-after-cpufreq-acpi-init-funcs-got-called-already +++
> a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
> @@ -96,6 +96,12 @@ static int pmi_notifier(struct notifier_
>  	struct cpufreq_frequency_table *cbe_freqs;
>  	u8 node;
>
> +	/* Should this really be called for CPUFREQ_ADJUST, CPUFREQ_INCOMPATIBLE
> +	 * and CPUFREQ_NOTIFY policy events?)
> +	 */
> +	if (event == CPUFREQ_START)
> +		return 0;
> +
>  	cbe_freqs = cpufreq_frequency_get_table(policy->cpu);
>  	node = cbe_cpu_to_node(policy->cpu);
>
> diff -puN
> drivers/acpi/processor_perflib.c~cpufreq-acpi-only-call-_ppc-after-cpufreq-
>acpi-init-funcs-got-called-already drivers/acpi/processor_perflib.c ---
> a/drivers/acpi/processor_perflib.c~cpufreq-acpi-only-call-_ppc-after-cpufre
>q-acpi-init-funcs-got-called-already +++ a/drivers/acpi/processor_perflib.c
> @@ -72,7 +72,13 @@ MODULE_PARM_DESC(ignore_ppc, "If the fre
>  #define PPC_REGISTERED   1
>  #define PPC_IN_USE       2
>
> -static int acpi_processor_ppc_status = 0;
> +/* ignore_ppc:
> + * -1 -> cpufreq low level drivers not initialized -> _PSS, etc. not
> called yet + *       ignore _PPC
> + *  0 -> cpufreq low level drivers initialized -> consider _PPC values
> + *  1 -> ignore _PPC totally -> forced by user through boot param
> + */
> +static int acpi_processor_ppc_status = -1;
>
>  static int acpi_processor_ppc_notifier(struct notifier_block *nb,
>  				       unsigned long event, void *data)
> @@ -81,6 +87,11 @@ static int acpi_processor_ppc_notifier(s
>  	struct acpi_processor *pr;
>  	unsigned int ppc = 0;
>
> +	if (event == CPUFREQ_START && ignore_ppc <= 0) {
> +		ignore_ppc = 0;
> +		return 0;
> +	}
> +
>  	if (ignore_ppc)
>  		return 0;
>
> diff -puN
> drivers/cpufreq/cpufreq.c~cpufreq-acpi-only-call-_ppc-after-cpufreq-acpi-in
>it-funcs-got-called-already drivers/cpufreq/cpufreq.c ---
> a/drivers/cpufreq/cpufreq.c~cpufreq-acpi-only-call-_ppc-after-cpufreq-acpi-
>init-funcs-got-called-already +++ a/drivers/cpufreq/cpufreq.c
> @@ -825,6 +825,9 @@ static int cpufreq_add_dev(struct sys_de
>  	policy->user_policy.min = policy->cpuinfo.min_freq;
>  	policy->user_policy.max = policy->cpuinfo.max_freq;
>
> +	blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
> +				     CPUFREQ_START, policy);
> +
>  #ifdef CONFIG_SMP
>
>  #ifdef CONFIG_HOTPLUG_CPU
> diff -puN
> include/linux/cpufreq.h~cpufreq-acpi-only-call-_ppc-after-cpufreq-acpi-init
>-funcs-got-called-already include/linux/cpufreq.h ---
> a/include/linux/cpufreq.h~cpufreq-acpi-only-call-_ppc-after-cpufreq-acpi-in
>it-funcs-got-called-already +++ a/include/linux/cpufreq.h
> @@ -106,6 +106,7 @@ struct cpufreq_policy {
>  #define CPUFREQ_ADJUST		(0)
>  #define CPUFREQ_INCOMPATIBLE	(1)
>  #define CPUFREQ_NOTIFY		(2)
> +#define CPUFREQ_START		(3)
>
>  #define CPUFREQ_SHARED_TYPE_NONE (0) /* None */
>  #define CPUFREQ_SHARED_TYPE_HW	 (1) /* HW does needed coordination */
> _



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: cpufreq limits avilable frequencies to 800MHz on git kernel
  2008-05-26 16:15         ` Arkadiusz Miskiewicz
  2008-05-26 16:23           ` Arkadiusz Miskiewicz
@ 2008-05-27  9:35           ` Thomas Renninger
  1 sibling, 0 replies; 7+ messages in thread
From: Thomas Renninger @ 2008-05-27  9:35 UTC (permalink / raw)
  To: Arkadiusz Miskiewicz
  Cc: linux-kernel, cpufreq, Andrew Morton, gnorton, miguel, linux-acpi,
	Pallipadi, Venkatesh

On Mon, 2008-05-26 at 18:15 +0200, Arkadiusz Miskiewicz wrote:
> On Monday 26 May 2008, Thomas Renninger wrote:
> > On Mon, 2008-05-26 at 09:07 +0200, Arkadiusz Miskiewicz wrote:
> > > On Sunday 25 May 2008, Thomas Renninger wrote:
> > > > On Sun, 2008-05-25 at 11:36 +0200, Arkadiusz Miskiewicz wrote:
> > > > > On Saturday 24 May 2008, Andrew Morton wrote:
> > > > > > On Fri, 23 May 2008 19:44:57 +0200 Arkadiusz Miskiewicz
> > > > > > <arekm@maven.pl>
> > > > >
> > > > > wrote:
> > > > > > > thinkpad z60m, Intel(R) Pentium(R) M processor 2.00GHz. kernel
> > > > > > > from git from 1-2 days ago.
> > > > > > >
> > > > > > > Unfortunately it seems that suspend to ram/resume causes
> > > > > > > frequency to be limited to 800MHz only. I can't set it to 2GHz
> > > > > > > again :-/
> > > > > > >
> > > > > > > scaling_max_freq is then 800000 and cannot be changed.
> > > > > > >
> > > > > > > reboot and the problem disappears until new suspend/resume cycle.
> > > > > > >
> > > > > > > cpufreq stuff is driven by acpi-cpufreq
> > > > > > >
> > > > > > > $ cpufreq-info
> > > > > > > cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006
> > > > > > > Report errors and bugs to linux@brodo.de, please.
> > > > > > > analyzing CPU 0:
> > > > > > >   driver: acpi-cpufreq
> > > > > > >   CPUs which need to switch frequency at the same time: 0
> > > > > > >   hardware limits: 800 MHz - 2.00 GHz
> > > > > > >   available frequency steps: 2.00 GHz, 1.60 GHz, 1.33 GHz, 1.07
> > > > > > > GHz, 800 MHz available cpufreq governors: powersave, userspace,
> > > > > > > ondemand, performance current policy: frequency should be within
> > > > > > > 800 MHz and 800 MHz. The governor "performance" may decide which
> > > > > > > speed to use within this range.
> > > > > > >   current CPU frequency is 800 MHz.
> > > > > > >
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/affected_cpus:0
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq:800000
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq:2000000
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq:800000
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/related_cpus:0
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencie
> > > > > > >s:20 0000 0 1600000 1333000 1066000 800000
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors:
> > > > > > >powe rsav e userspace ondemand performance
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq:800000
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver:acpi-cpufreq
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor:performance
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq:800000
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq:800000
> > > > > > > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed:<unsupporte
> > > > > > >d>
> > > > > >
> > > > > > Thanks.  Is this a newly-occurring bug or did earlier kernels do
> > > > > > this also?
> > > > > >
> > > > > > If it was newly added, do you know in which kernel version we might
> > > > > > have added it?
> > > > >
> > > > > I wasn't able to reproduce the problem on final 2.6.24 but was able
> > > > > to reproduce on final 2.6.25. Problem introduced somewhere between it
> > > > > seems.
> > > > >
> > > > > Note that 2-3 suspend to ram/resume cycles is needed to get into the
> > > > > problem.
> > > >
> > > > Sounds related to:
> > > > [Bug 374099] T61p speedstep problems (ondemand scheduler)
> > > > https://bugzilla.novell.com/show_bug.cgi?id=374099
> > >
> > > login/pass protected
> > >
> > > > Miguel speaks from "good boots" and "bad boots".
> > >
> > > Actually I also got "bad boot" (so no suspend/resume was needed).
> > >
> > > > Could you check whether the OS thinks it is too hot.
> > > > I described some basics how to monitor temperature and cpufreq (if
> > > > passive cooling kicks in) here:
> > > > https://bugzilla.novell.com/show_bug.cgi?id=387702#c13
> > >
> > > Doesn't seem to be overheated
> > >
> > > [arekm@tarm ~]$ cat
> > > /proc/acpi/thermal_zone/*/{temperature,trip_points,state}; cat
> > > /sys/devices/system/cpu/cpu*/cpufreq/scaling_{cur_freq,max_freq}
> > > temperature:             45 C
> > > critical (S5):           99 C
> > > passive:                 95 C: tc1=5 tc2=4 tsp=600 devices= CPU
> > > state:                   ok
> > > 800000
> > > 800000
> > >
> > > but still limited to 800MHz.
> > >
> > > > Hmm, it may just have been fixed by this one:
> > > > commit e56a727b023d40d1adf660168883f30f2e6abe0a
> > > > Author: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
> > > > Date:   Mon Apr 28 15:13:43 2008 -0400
> > > >
> > > > Miguel, Geoff: This is already in 11.0 for some time and in 10.3 for
> > > > some days.
> > >
> > > Unfortunately it doesn't fix the problem. The patch is in Linus tree for
> > > long time (so I guess I had it when initially reporting the problem) + I
> > > upgraded today to current git - the problem is still there.
> >
> > Yep, Dells and some HP should be fixed, it would have been strange if
> > ThinkPads are now also affected, but thanks for double checking, it
> > shows the same symptoms.
> >
> > Then it might be _PPC.
> > If you compile in CPUFREQ_DEBUG and add the boot param:
> > cpufreq.debug=7
> > you should see a message in dmesg (if you do not see one, then
> > everything is fine you have a "good boot" and freq should be at max?):
> > cpufreq_printk("CPU %d: _PPC is %d - frequency %s limited\n", pr->id,
> >                        (int)ppc, ppc ? "" : "not");
> >
> > If PPC is zero all frequencies are allowed, if it is one max_freq will
> > be set to the second highest freq, etc.
> >
> > If it's that you can workaround that (temporarily, pls help evaluating
> > this further) you can use:
> > processor.ignore_ppc=1
> >
> > I remember Ingo Molnar sent a patch to not always evaluate _PPC at
> > boot/initialization time, but only on processor notification events.
> > AFAIK this was a recent ThinkPad, so this might be it what you are
> > seeing. But nobody knew why some ThinkPads had a wrong _PPC value at
> > initialization time.
> >
> > If this is PPC related, this is more an ACPI than a cpufreq issue ->
> > adding linux-acpi list.
> 
> Ok, there is something, see:
> 
> [ 4093.625227] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> [ 4095.755272] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
> [ 4095.755508] acpi-cpufreq: acpi_cpufreq_verify
> [ 4095.755642] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> [ 4095.755780] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> [ 4095.755916] acpi-cpufreq: acpi_cpufreq_verify
> [ 4095.756042] freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
> [ 4095.756179] freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
> [ 4095.756314] cpufreq-core: new min and max freqs are 800000 - 800000 kHz
> 
> PPC related messages are:
> 
> $ dmesg|grep PPC
> [ 3597.291342] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
> [ 3721.943484] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
> [ 3881.874373] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
> [ 4216.175414] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
> 
This looks ok...
I'd expected:
[ 4216.175414] cpufreq-core: CPU 0: _PPC is 4 - frequency limited
Then it should be limited and get unlimited with e.g.:
[ 4216.175414] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited

AFAIK, max_freq should only get limited via passive cooling or explicit
BIOS limitation via _PPC.

> May 26 19:02:28 tarm kernel: [    6.184998] ACPI: Video Device [VID1]
The video driver is rather broken, especially on ThinkPads arbitrary HW
might get accessed, better blacklist video in modprobe.conf for now.
Probably unrelated, just to be sure...

Some strange frequency targets, min freq is 800.000 Khz, I wonder where
these values are coming from:
May 26 17:40:57 tarm kernel: [ 2319.124990] cpufreq-core: target for CPU
0: 400000 kHz, relation 0
May 26 17:40:57 tarm kernel: [ 2319.125141] acpi-cpufreq:
acpi_cpufreq_target 400000 (0)
May 26 17:59:39 tarm kernel: [ 3441.125163] cpufreq-core: target for CPU
0: 571428 kHz, relation 0
May 26 17:39:57 tarm kernel: [ 2259.125137] cpufreq-core: target for CPU 0: 342857 kHz, relation 0


The bad seems to happen at the end at 17:59 (the rest of the logs should
be rather uninteresting). There the frequency gets limited to 800. Then
every about 2-3 (18:02, 18:04)  mins something odd is happening:
The limitation falls away (2000 is allowed again) and ten seconds later
the frequency is limited again.

It already starts before...:
17:59:54 limited to 800
18:02:15 unlimited, max_freq 2000
18:02:28 limited to 800
18:04:20 unlimited, max_freq 2000
18:05:14 limited to 800
18:07:00 unlimited, max_freq 2000
18:10:34 limited to 800


Sorry, but I currently do not have time to look deeper at this.
I try to look at it the next days, if I haven't answered until Sa, I
won't be able to for the next 2 weeks.

   Thomas

> complete log from boot:
(stripped)
> May 26 17:13:47 tarm kernel: [  681.613159] Freezing user space processes ... (elapsed 0.00 seconds) done.
> May 26 17:13:47 tarm kernel: [  681.614674] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
> May 26 17:13:47 tarm kernel: [  681.614758] Suspending console(s)
> May 26 17:13:47 tarm kernel: [  681.835093] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> May 26 17:13:47 tarm kernel: [  681.844214] sd 0:0:0:0: [sda] Stopping disk
> May 26 17:13:47 tarm kernel: [  683.265808] nsc-ircc 00:09: disabled
> May 26 17:13:47 tarm kernel: [  683.265997] eth1: Going into suspend...
> May 26 17:13:47 tarm kernel: [  683.270843] ACPI: PCI interrupt for device 0000:14:02.0 disabled
> May 26 17:13:47 tarm kernel: [  683.270855] ACPI handle has no context!
> May 26 17:13:47 tarm kernel: [  683.286131] ACPI handle has no context!
> May 26 17:13:47 tarm kernel: [  683.286160] ACPI: PCI interrupt for device 0000:14:00.2 disabled
> May 26 17:13:47 tarm kernel: [  683.286170] ACPI handle has no context!
> May 26 17:13:47 tarm kernel: [  683.306077] ACPI handle has no context!
> May 26 17:13:47 tarm kernel: [  683.462597] ACPI handle has no context!
> May 26 17:13:47 tarm kernel: [  683.681053] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
> May 26 17:13:47 tarm kernel: [  683.700321] ACPI: Preparing to enter system sleep state S3
> May 26 17:13:47 tarm kernel: [  683.712644] Extended CMOS year: 2000
> May 26 17:13:47 tarm kernel: [  683.712644] Intel machine check architecture supported.
> May 26 17:13:47 tarm kernel: [  683.712660] Intel machine check reporting enabled on CPU#0.
> May 26 17:13:47 tarm kernel: [  683.712761] Back to C!
> May 26 17:13:47 tarm kernel: [  683.712967] Extended CMOS year: 2000
> May 26 17:13:47 tarm kernel: [  683.712967] Force enabled HPET at resume
> May 26 17:13:47 tarm kernel: [  683.712967] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
> May 26 17:13:47 tarm kernel: [  683.712967] acpi-cpufreq: acpi_cpufreq_verify
> May 26 17:13:47 tarm kernel: [  683.712967] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 17:13:47 tarm kernel: [  683.712967] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 17:13:47 tarm kernel: [  683.712967] acpi-cpufreq: acpi_cpufreq_verify
> May 26 17:13:47 tarm kernel: [  683.712967] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 17:13:47 tarm kernel: [  683.712967] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 17:13:47 tarm kernel: [  683.712967] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
> May 26 17:13:47 tarm kernel: [  683.712967] cpufreq-core: governor: change or update limits
> May 26 17:13:47 tarm kernel: [  683.712967] cpufreq-core: __cpufreq_governor for CPU 0, event 3
> May 26 17:13:47 tarm kernel: [  683.762614] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100107, writing 100507)
> May 26 17:13:47 tarm kernel: [  683.762614] PCI: Setting latency timer of device 0000:00:01.0 to 64
> May 26 17:13:47 tarm kernel: [  683.789051] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
> May 26 17:13:47 tarm kernel: [  683.789074] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
> May 26 17:13:47 tarm kernel: [  683.789081] PCI: Setting latency timer of device 0000:00:1b.0 to 64
> May 26 17:13:47 tarm kernel: [  683.845176] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
> May 26 17:13:47 tarm kernel: [  683.845248] PCI: Setting latency timer of device 0000:00:1c.0 to 64
> May 26 17:13:47 tarm kernel: [  683.845299] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
> May 26 17:13:47 tarm kernel: [  683.845363] PCI: Setting latency timer of device 0000:00:1c.1 to 64
> May 26 17:13:47 tarm kernel: [  683.845423] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
> May 26 17:13:47 tarm kernel: [  683.845487] PCI: Setting latency timer of device 0000:00:1c.2 to 64
> May 26 17:13:47 tarm kernel: [  683.845548] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507)
> May 26 17:13:47 tarm kernel: [  683.845611] PCI: Setting latency timer of device 0000:00:1c.3 to 64
> May 26 17:13:47 tarm kernel: [  683.845627] PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10b)
> May 26 17:13:47 tarm kernel: [  683.845673] PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b)
> May 26 17:13:47 tarm kernel: [  683.845728] PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30b)
> May 26 17:13:47 tarm kernel: [  683.845774] PM: Writing back config space on device 0000:00:1d.3 at offset f (was 400, writing 40b)
> May 26 17:13:47 tarm kernel: [  683.845836] PM: Writing back config space on device 0000:00:1d.7 at offset f (was 400, writing 40b)
> May 26 17:13:47 tarm kernel: [  683.845873] PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing b0004000)
> May 26 17:13:47 tarm kernel: [  683.845881] PM: Writing back config space on device 0000:00:1d.7 at offset 1 (was 2900000, writing 2900102)
> May 26 17:13:47 tarm kernel: [  683.845980] PCI: Setting latency timer of device 0000:00:1e.0 to 64
> May 26 17:13:47 tarm kernel: [  683.861043] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00005, writing 2b80005)
> May 26 17:13:47 tarm kernel: [  683.861062] PCI: Setting latency timer of device 0000:00:1f.2 to 64
> May 26 17:13:47 tarm kernel: [  683.863259] PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100103, writing 100107)
> May 26 17:13:47 tarm kernel: [  683.863323] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> May 26 17:13:47 tarm kernel: [  683.863327] PCI: Setting latency timer of device 0000:01:00.0 to 64
> May 26 17:13:47 tarm kernel: [  683.863365] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing fcff0000)
> May 26 17:13:47 tarm kernel: [  683.863391] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 100106)
> May 26 17:13:47 tarm kernel: [  684.201259] PM: Writing back config space on device 0000:14:00.1 at offset 4 (was 0, writing c0001000)
> May 26 17:13:47 tarm kernel: [  684.201265] PM: Writing back config space on device 0000:14:00.1 at offset 3 (was 800000, writing 804000)
> May 26 17:13:47 tarm kernel: [  684.201273] PM: Writing back config space on device 0000:14:00.1 at offset 1 (was 2100000, writing 2100106)
> May 26 17:13:47 tarm kernel: [  684.213807] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
> May 26 17:13:47 tarm kernel: [  684.213809] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
> May 26 17:13:47 tarm kernel: [  684.221813] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 succeeded
> May 26 17:13:47 tarm kernel: [  684.229816] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 succeeded
> May 26 17:13:47 tarm kernel: [  684.254164] ata2.00: configured for UDMA/33
> May 26 17:13:47 tarm kernel: [  684.256181] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[c0001000-c00017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
> May 26 17:13:47 tarm kernel: [  684.281188] PM: Writing back config space on device 0000:14:00.2 at offset 4 (was 0, writing c0001800)
> May 26 17:13:47 tarm kernel: [  684.281193] PM: Writing back config space on device 0000:14:00.2 at offset 3 (was 800000, writing 804000)
> May 26 17:13:47 tarm kernel: [  684.281200] PM: Writing back config space on device 0000:14:00.2 at offset 1 (was 2100000, writing 2100106)
> May 26 17:13:47 tarm kernel: [  684.281219] ACPI: PCI Interrupt 0000:14:00.2[C] -> GSI 18 (level, low) -> IRQ 18
> May 26 17:13:47 tarm kernel: [  684.282264] eth1: Coming out of suspend...
> May 26 17:13:47 tarm kernel: [  684.304115] ACPI: PCI Interrupt 0000:14:02.0[A] -> GSI 21 (level, low) -> IRQ 21
> May 26 17:13:47 tarm kernel: [  684.304856] nsc-ircc 00:09: activated
> May 26 17:13:47 tarm kernel: [  685.125021] __ratelimit: 36 messages suppressed
> May 26 17:13:47 tarm kernel: [  685.125024] cpufreq-core: target for CPU 0: 1005714 kHz, relation 0
> May 26 17:13:47 tarm kernel: [  685.240365] sd 0:0:0:0: [sda] Starting disk
> May 26 17:13:47 tarm kernel: [  685.361681] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
> May 26 17:13:47 tarm kernel: [  685.361686] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> May 26 17:13:47 tarm kernel: [  685.361691] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
> May 26 17:13:47 tarm kernel: [  685.361696] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
> May 26 17:13:47 tarm kernel: [  685.362115] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
> May 26 17:13:47 tarm kernel: [  685.385653] ata1.00: configured for UDMA/100
> May 26 17:13:47 tarm kernel: [  685.409640] ata1.00: configured for UDMA/100
> May 26 17:13:47 tarm kernel: [  685.409645] ata1: EH complete
> May 26 17:13:47 tarm kernel: [  685.409720] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
> May 26 17:13:47 tarm kernel: [  685.409754] sd 0:0:0:0: [sda] Write Protect is off
> May 26 17:13:47 tarm kernel: [  685.409759] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> May 26 17:13:47 tarm kernel: [  685.409816] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> May 26 17:13:47 tarm kernel: [  685.409873] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
> May 26 17:13:47 tarm kernel: [  685.409904] sd 0:0:0:0: [sda] Write Protect is off
> May 26 17:13:47 tarm kernel: [  685.409908] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> May 26 17:13:47 tarm kernel: [  685.409964] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> May 26 17:13:47 tarm kernel: [  688.101026] hdaps: initial latch check good (0x01).
> May 26 17:13:47 tarm kernel: [  688.509522] Restarting tasks ... done.
> May 26 17:13:47 tarm kernel: [  688.613227] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
> May 26 17:13:47 tarm kernel: [  688.613491] PCI: Setting latency timer of device 0000:00:1d.7 to 64
> May 26 17:13:47 tarm kernel: [  688.613633] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> May 26 17:13:47 tarm kernel: [  688.662871] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
> May 26 17:13:47 tarm kernel: [  688.667009] ehci_hcd 0000:00:1d.7: debug port 1
> May 26 17:13:47 tarm kernel: [  688.669045] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
> May 26 17:13:47 tarm kernel: [  688.669225] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb0004000
> May 26 17:13:47 tarm kernel: [  688.685034] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> May 26 17:13:47 tarm kernel: [  688.685481] usb usb1: configuration #1 chosen from 1 choice
> May 26 17:13:47 tarm kernel: [  688.691355] hub 1-0:1.0: USB hub found
> May 26 17:13:47 tarm kernel: [  688.691495] hub 1-0:1.0: 8 ports detected
> May 26 17:13:47 tarm kernel: [  688.805182] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> May 26 17:13:47 tarm kernel: [  688.805194] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> May 26 17:13:47 tarm kernel: [  688.805201] usb usb1: Product: EHCI Host Controller
> May 26 17:13:47 tarm kernel: [  688.805207] usb usb1: Manufacturer: Linux 2.6.26-rc3 ehci_hcd
> May 26 17:13:47 tarm kernel: [  688.805213] usb usb1: SerialNumber: 0000:00:1d.7
> May 26 17:13:47 tarm kernel: [  688.816077] USB Universal Host Controller Interface driver v3.0
> May 26 17:13:47 tarm kernel: [  688.816157] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
> May 26 17:13:47 tarm kernel: [  688.816177] PCI: Setting latency timer of device 0000:00:1d.0 to 64
> May 26 17:13:47 tarm kernel: [  688.816185] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> May 26 17:13:47 tarm kernel: [  688.816252] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> May 26 17:13:47 tarm kernel: [  688.816288] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
> May 26 17:13:47 tarm kernel: [  688.816514] usb usb2: configuration #1 chosen from 1 choice
> May 26 17:13:47 tarm kernel: [  688.816578] hub 2-0:1.0: USB hub found
> May 26 17:13:47 tarm kernel: [  688.816592] hub 2-0:1.0: 2 ports detected
> May 26 17:13:47 tarm kernel: [  688.917139] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
> May 26 17:13:47 tarm kernel: [  688.917780] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> May 26 17:13:47 tarm kernel: [  688.917792] usb usb2: Product: UHCI Host Controller
> May 26 17:13:47 tarm kernel: [  688.917798] usb usb2: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
> May 26 17:13:47 tarm kernel: [  688.917803] usb usb2: SerialNumber: 0000:00:1d.0
> May 26 17:13:47 tarm kernel: [  688.917849] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
> May 26 17:13:47 tarm kernel: [  688.917868] PCI: Setting latency timer of device 0000:00:1d.1 to 64
> May 26 17:13:47 tarm kernel: [  688.917876] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> May 26 17:13:47 tarm kernel: [  688.917936] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
> May 26 17:13:47 tarm kernel: [  688.917972] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
> May 26 17:13:47 tarm kernel: [  688.918197] usb usb3: configuration #1 chosen from 1 choice
> May 26 17:13:47 tarm kernel: [  688.918263] hub 3-0:1.0: USB hub found
> May 26 17:13:47 tarm kernel: [  688.918277] hub 3-0:1.0: 2 ports detected
> May 26 17:13:48 tarm kernel: [  689.001814] hub 1-0:1.0: unable to enumerate USB device on port 3
> May 26 17:13:48 tarm kernel: [  689.021284] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> May 26 17:13:48 tarm kernel: [  689.021491] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> May 26 17:13:48 tarm kernel: [  689.021502] usb usb3: Product: UHCI Host Controller
> May 26 17:13:48 tarm kernel: [  689.021507] usb usb3: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
> May 26 17:13:48 tarm kernel: [  689.021513] usb usb3: SerialNumber: 0000:00:1d.1
> May 26 17:13:48 tarm kernel: [  689.021559] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
> May 26 17:13:48 tarm kernel: [  689.021578] PCI: Setting latency timer of device 0000:00:1d.2 to 64
> May 26 17:13:48 tarm kernel: [  689.021586] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> May 26 17:13:48 tarm kernel: [  689.021641] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> May 26 17:13:48 tarm kernel: [  689.021675] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
> May 26 17:13:48 tarm kernel: [  689.021905] usb usb4: configuration #1 chosen from 1 choice
> May 26 17:13:48 tarm kernel: [  689.021971] hub 4-0:1.0: USB hub found
> May 26 17:13:48 tarm kernel: [  689.021984] hub 4-0:1.0: 2 ports detected
> May 26 17:13:48 tarm kernel: [  689.125223] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> May 26 17:13:48 tarm kernel: [  689.125235] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> May 26 17:13:48 tarm kernel: [  689.125242] usb usb4: Product: UHCI Host Controller
> May 26 17:13:48 tarm kernel: [  689.125248] usb usb4: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
> May 26 17:13:48 tarm kernel: [  689.125254] usb usb4: SerialNumber: 0000:00:1d.2
> May 26 17:13:48 tarm kernel: [  689.125297] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
> May 26 17:13:48 tarm kernel: [  689.125317] PCI: Setting latency timer of device 0000:00:1d.3 to 64
> May 26 17:13:48 tarm kernel: [  689.125324] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> May 26 17:13:48 tarm kernel: [  689.125377] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> May 26 17:13:48 tarm kernel: [  689.125412] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
> May 26 17:13:48 tarm kernel: [  689.125642] usb usb5: configuration #1 chosen from 1 choice
> May 26 17:13:48 tarm kernel: [  689.125708] hub 5-0:1.0: USB hub found
> May 26 17:13:48 tarm kernel: [  689.125722] hub 5-0:1.0: 2 ports detected
> May 26 17:13:48 tarm kernel: [  689.229073] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> May 26 17:13:48 tarm kernel: [  689.229218] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> May 26 17:13:48 tarm kernel: [  689.229275] usb usb5: Product: UHCI Host Controller
> May 26 17:13:48 tarm kernel: [  689.229328] usb usb5: Manufacturer: Linux 2.6.26-rc3 uhci_hcd
> May 26 17:13:48 tarm kernel: [  689.229380] usb usb5: SerialNumber: 0000:00:1d.3
> May 26 17:13:48 tarm kernel: [  689.241062] hub 1-0:1.0: unable to enumerate USB device on port 5
> May 26 17:13:48 tarm kernel: [  689.335824] [drm] Loading R300 Microcode
> May 26 17:13:48 tarm kernel: [  689.481010] hub 1-0:1.0: unable to enumerate USB device on port 6
> May 26 17:13:48 tarm kernel: [  689.721001] usb 3-1: new low speed USB device using uhci_hcd and address 2
> May 26 17:13:48 tarm kernel: [  689.900933] usb 3-1: configuration #1 chosen from 1 choice
> May 26 17:13:48 tarm kernel: [  689.929009] input: Logitech Trackball as /class/input/input18
> May 26 17:13:48 tarm kernel: [  689.957156] input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.1-1
> May 26 17:13:48 tarm kernel: [  689.957408] usb 3-1: New USB device found, idVendor=046d, idProduct=c404
> May 26 17:13:48 tarm kernel: [  689.957465] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> May 26 17:13:48 tarm kernel: [  689.957517] usb 3-1: Product: Trackball
> May 26 17:13:48 tarm kernel: [  689.957566] usb 3-1: Manufacturer: Logitech
> May 26 17:13:49 tarm kernel: [  690.197096] usb 4-1: new full speed USB device using uhci_hcd and address 2
> May 26 17:13:49 tarm kernel: [  690.374479] usb 4-1: configuration #1 chosen from 1 choice
> May 26 17:13:49 tarm kernel: [  690.380777] usb 4-1: New USB device found, idVendor=0a5c, idProduct=2110
> May 26 17:13:49 tarm kernel: [  690.381156] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> May 26 17:13:49 tarm kernel: [  690.381228] usb 4-1: Product: BCM2045B
> May 26 17:13:49 tarm kernel: [  690.381279] usb 4-1: Manufacturer: Broadcom Corp
> May 26 17:13:49 tarm kernel: [  690.621038] usb 4-2: new full speed USB device using uhci_hcd and address 3
> May 26 17:13:49 tarm kernel: [  690.642216] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
> May 26 17:13:49 tarm kernel: [  690.649778] pan1: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
> May 26 17:13:49 tarm kernel: [  690.791941] usb 4-2: configuration #1 chosen from 1 choice
> May 26 17:13:49 tarm kernel: [  690.799042] usb 4-2: New USB device found, idVendor=0483, idProduct=2016
> May 26 17:13:49 tarm kernel: [  690.799147] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> May 26 17:13:49 tarm kernel: [  690.799217] usb 4-2: Product: Biometric Coprocessor
> May 26 17:13:49 tarm kernel: [  690.799267] usb 4-2: Manufacturer: STMicroelectronics
> May 26 17:13:51 tarm kernel: [  692.125168] __ratelimit: 20 messages suppressed
> May 26 17:13:51 tarm kernel: [  692.125309] cpufreq-core: target for CPU 0: 400000 kHz, relation 0
> May 26 17:13:51 tarm kernel: [  692.821450] ADDRCONF(NETDEV_UP): eth0: link is not ready
> May 26 17:13:54 tarm kernel: [  695.124991] __ratelimit: 13 messages suppressed
> May 26 17:13:54 tarm kernel: [  695.125126] cpufreq-core: target for CPU 0: 1714285 kHz, relation 0
> May 26 17:13:57 tarm kernel: [  698.726701] ADDRCONF(NETDEV_UP): eth1: link is not ready
> May 26 17:13:58 tarm kernel: [  699.619284] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
> May 26 17:14:00 tarm kernel: [  701.625013] __ratelimit: 27 messages suppressed
> May 26 17:14:00 tarm kernel: [  701.625238] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:14:01 tarm kernel: [  702.285362] tun0: Disabled Privacy Extensions
> May 26 17:14:08 tarm kernel: [  709.912981] eth1: no IPv6 routers present
> May 26 17:14:10 tarm kernel: [  711.125019] __ratelimit: 27 messages suppressed
> May 26 17:14:10 tarm kernel: [  711.125255] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:14:10 tarm kernel: [  711.125430] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:14:51 tarm kernel: [  752.125025] __ratelimit: 12 messages suppressed
> May 26 17:14:51 tarm kernel: [  752.125268] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:14:51 tarm kernel: [  752.125414] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:14:51 tarm kernel: [  752.125551] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:14:51 tarm kernel: [  752.125691] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:14:51 tarm kernel: [  752.125820] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:14:51 tarm kernel: [  752.125978] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:14:51 tarm kernel: [  752.126035] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:14:51 tarm kernel: [  752.624990] cpufreq-core: target for CPU 0: 685714 kHz, relation 0
> May 26 17:14:54 tarm kernel: [  755.125030] __ratelimit: 20 messages suppressed
> May 26 17:14:54 tarm kernel: [  755.125175] cpufreq-core: target for CPU 0: 137142 kHz, relation 0
> May 26 17:15:05 tarm kernel: [  766.626964] __ratelimit: 39 messages suppressed
> May 26 17:15:05 tarm kernel: [  766.627173] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:15:05 tarm kernel: [  766.627318] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:15:09 tarm kernel: [  770.625018] __ratelimit: 19 messages suppressed
> May 26 17:15:09 tarm kernel: [  770.625466] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:15:18 tarm kernel: [  779.625026] __ratelimit: 13 messages suppressed
> May 26 17:15:18 tarm kernel: [  779.625254] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:15:19 tarm kernel: [  780.124986] __ratelimit: 6 messages suppressed
> May 26 17:15:19 tarm kernel: [  780.125126] cpufreq-core: target for CPU 0: 171428 kHz, relation 0
> May 26 17:15:53 tarm kernel: [  814.624997] __ratelimit: 20 messages suppressed
> May 26 17:15:53 tarm kernel: [  814.625215] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:15:53 tarm kernel: [  814.625381] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:15:53 tarm kernel: [  814.625513] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:15:53 tarm kernel: [  814.625650] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:15:53 tarm kernel: [  814.625779] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:15:53 tarm kernel: [  814.625913] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:15:54 tarm kernel: [  815.124988] __ratelimit: 1 messages suppressed
> May 26 17:15:54 tarm kernel: [  815.125128] cpufreq-core: target for CPU 0: 0 kHz, relation 0
> May 26 17:16:53 tarm kernel: [  874.624998] __ratelimit: 6 messages suppressed
> May 26 17:16:53 tarm kernel: [  874.625222] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:16:53 tarm kernel: [  874.625388] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:16:53 tarm kernel: [  874.625522] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:16:53 tarm kernel: [  874.625658] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:16:53 tarm kernel: [  874.625786] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:16:53 tarm kernel: [  874.625920] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:16:53 tarm kernel: [  874.625975] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:16:54 tarm kernel: [  875.124986] cpufreq-core: target for CPU 0: 0 kHz, relation 0
> May 26 17:16:54 tarm kernel: [  875.125137] acpi-cpufreq: acpi_cpufreq_target 0 (0)
> May 26 17:16:54 tarm kernel: [  875.125211] freq-table: request for target 0 kHz (relation: 0) for cpu 0
> May 26 17:17:53 tarm kernel: [  934.625012] __ratelimit: 18 messages suppressed
> May 26 17:17:53 tarm kernel: [  934.625248] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:17:53 tarm kernel: [  934.625413] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:17:53 tarm kernel: [  934.625549] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:17:53 tarm kernel: [  934.625685] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:17:53 tarm kernel: [  934.625815] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:17:53 tarm kernel: [  934.625949] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:17:53 tarm kernel: [  934.626004] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:17:54 tarm kernel: [  935.124990] cpufreq-core: target for CPU 0: 171428 kHz, relation 0
> May 26 17:17:54 tarm kernel: [  935.125159] acpi-cpufreq: acpi_cpufreq_target 171428 (0)
> May 26 17:17:54 tarm kernel: [  935.125249] freq-table: request for target 171428 kHz (relation: 0) for cpu 0
> May 26 17:18:04 tarm kernel: [  945.125001] __ratelimit: 4 messages suppressed
> May 26 17:18:04 tarm kernel: [  945.125228] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:18:04 tarm kernel: [  945.125397] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:18:53 tarm kernel: [  994.625059] __ratelimit: 12 messages suppressed
> May 26 17:18:53 tarm kernel: [  994.625297] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:18:53 tarm kernel: [  994.625440] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:18:53 tarm kernel: [  994.625575] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:18:53 tarm kernel: [  994.625715] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:18:53 tarm kernel: [  994.625847] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:18:53 tarm kernel: [  994.625983] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:18:53 tarm kernel: [  994.626037] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:18:54 tarm kernel: [  995.624989] cpufreq-core: target for CPU 0: 57142 kHz, relation 0
> May 26 17:18:54 tarm kernel: [  995.625149] acpi-cpufreq: acpi_cpufreq_target 57142 (0)
> May 26 17:18:54 tarm kernel: [  995.625223] freq-table: request for target 57142 kHz (relation: 0) for cpu 0
> May 26 17:19:14 tarm kernel: [ 1015.125008] __ratelimit: 4 messages suppressed
> May 26 17:19:14 tarm kernel: [ 1015.125233] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:19:14 tarm kernel: [ 1015.125399] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:19:14 tarm kernel: [ 1015.125533] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:19:14 tarm kernel: [ 1015.125670] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:19:54 tarm kernel: [ 1055.125008] __ratelimit: 17 messages suppressed
> May 26 17:19:54 tarm kernel: [ 1055.125243] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:19:54 tarm kernel: [ 1055.125382] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:19:54 tarm kernel: [ 1055.125513] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:19:54 tarm kernel: [ 1055.125649] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:19:54 tarm kernel: [ 1055.125777] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:19:54 tarm kernel: [ 1055.125911] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:19:54 tarm kernel: [ 1055.125965] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:19:54 tarm kernel: [ 1055.625012] cpufreq-core: target for CPU 0: 57142 kHz, relation 0
> May 26 17:20:14 tarm kernel: [ 1075.125008] __ratelimit: 6 messages suppressed
> May 26 17:20:14 tarm kernel: [ 1075.125237] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:20:14 tarm kernel: [ 1075.125381] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:20:14 tarm kernel: [ 1075.125515] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:20:14 tarm kernel: [ 1075.125653] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:20:26 tarm kernel: [ 1087.124998] __ratelimit: 10 messages suppressed
> May 26 17:20:26 tarm kernel: [ 1087.125221] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:20:26 tarm kernel: [ 1087.125384] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:20:54 tarm kernel: [ 1115.124997] __ratelimit: 12 messages suppressed
> May 26 17:20:54 tarm kernel: [ 1115.125222] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:20:54 tarm kernel: [ 1115.125388] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:20:54 tarm kernel: [ 1115.125523] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:20:54 tarm kernel: [ 1115.125659] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:20:54 tarm kernel: [ 1115.125788] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:20:54 tarm kernel: [ 1115.125947] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:21:15 tarm kernel: [ 1136.125011] __ratelimit: 8 messages suppressed
> May 26 17:21:15 tarm kernel: [ 1136.125243] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:21:15 tarm kernel: [ 1136.125382] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:21:15 tarm kernel: [ 1136.125527] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:21:15 tarm kernel: [ 1136.125689] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:21:54 tarm kernel: [ 1175.125018] __ratelimit: 10 messages suppressed
> May 26 17:21:54 tarm kernel: [ 1175.125245] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:21:54 tarm kernel: [ 1175.125387] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:21:54 tarm kernel: [ 1175.125520] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:21:54 tarm kernel: [ 1175.125658] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:21:54 tarm kernel: [ 1175.125790] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:21:54 tarm kernel: [ 1175.125925] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:21:54 tarm kernel: [ 1175.125979] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:21:54 tarm kernel: [ 1175.624992] cpufreq-core: target for CPU 0: 1771428 kHz, relation 0
> May 26 17:22:16 tarm kernel: [ 1197.625810] __ratelimit: 11 messages suppressed
> May 26 17:22:16 tarm kernel: [ 1197.626031] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:22:16 tarm kernel: [ 1197.626176] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:22:16 tarm kernel: [ 1197.626457] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:22:16 tarm kernel: [ 1197.626603] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:22:29 tarm kernel: [ 1210.125024] __ratelimit: 10 messages suppressed
> May 26 17:22:29 tarm kernel: [ 1210.125247] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:22:29 tarm kernel: [ 1210.125393] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:22:29 tarm kernel: [ 1210.125528] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:22:54 tarm kernel: [ 1235.625018] __ratelimit: 11 messages suppressed
> May 26 17:22:54 tarm kernel: [ 1235.625239] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:22:54 tarm kernel: [ 1235.625403] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:22:54 tarm kernel: [ 1235.625538] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:22:54 tarm kernel: [ 1235.625674] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:22:54 tarm kernel: [ 1235.625803] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:23:16 tarm kernel: [ 1257.125017] __ratelimit: 9 messages suppressed
> May 26 17:23:16 tarm kernel: [ 1257.125262] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:23:16 tarm kernel: [ 1257.125404] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:23:16 tarm kernel: [ 1257.125536] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:23:16 tarm kernel: [ 1257.125673] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:23:54 tarm kernel: [ 1295.625025] __ratelimit: 10 messages suppressed
> May 26 17:23:54 tarm kernel: [ 1295.625295] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:23:54 tarm kernel: [ 1295.625453] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:23:54 tarm kernel: [ 1295.625591] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:23:54 tarm kernel: [ 1295.625732] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:23:54 tarm kernel: [ 1295.625866] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:23:54 tarm kernel: [ 1295.626006] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:23:54 tarm kernel: [ 1295.626069] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:23:55 tarm kernel: [ 1296.124988] cpufreq-core: target for CPU 0: 342857 kHz, relation 0
> May 26 17:24:22 tarm kernel: [ 1323.125013] __ratelimit: 6 messages suppressed
> May 26 17:24:22 tarm kernel: [ 1323.125256] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:24:22 tarm kernel: [ 1323.125399] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:24:22 tarm kernel: [ 1323.125532] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:24:22 tarm kernel: [ 1323.125670] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:24:22 tarm kernel: [ 1323.125798] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:24:25 tarm kernel: [ 1326.125101] __ratelimit: 9 messages suppressed
> May 26 17:24:25 tarm kernel: [ 1326.125315] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:24:28 tarm kernel: [ 1329.625024] __ratelimit: 46 messages suppressed
> May 26 17:24:28 tarm kernel: [ 1329.625208] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:24:33 tarm kernel: [ 1334.624994] __ratelimit: 53 messages suppressed
> May 26 17:24:33 tarm kernel: [ 1334.625181] cpufreq-core: target for CPU 0: 121828 kHz, relation 0
> May 26 17:24:44 tarm kernel: [ 1345.125022] __ratelimit: 6 messages suppressed
> May 26 17:24:44 tarm kernel: [ 1345.125262] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:24:44 tarm kernel: [ 1345.125404] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:24:49 tarm kernel: [ 1350.125010] __ratelimit: 12 messages suppressed
> May 26 17:24:49 tarm kernel: [ 1350.125260] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:24:54 tarm kernel: [ 1355.625050] __ratelimit: 34 messages suppressed
> May 26 17:24:54 tarm kernel: [ 1355.625262] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:25:01 tarm kernel: [ 1362.124998] __ratelimit: 34 messages suppressed
> May 26 17:25:01 tarm kernel: [ 1362.125214] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:25:03 tarm kernel: [ 1364.625011] __ratelimit: 13 messages suppressed
> May 26 17:25:03 tarm kernel: [ 1364.625239] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:25:09 tarm kernel: [ 1370.625010] __ratelimit: 27 messages suppressed
> May 26 17:25:09 tarm kernel: [ 1370.625247] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:25:24 tarm kernel: [ 1385.625023] __ratelimit: 13 messages suppressed
> May 26 17:25:24 tarm kernel: [ 1385.625231] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:25:24 tarm kernel: [ 1385.625374] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:25:24 tarm kernel: [ 1385.625510] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:25:29 tarm kernel: [ 1390.125013] __ratelimit: 25 messages suppressed
> May 26 17:25:29 tarm kernel: [ 1390.125240] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:25:36 tarm kernel: [ 1397.125009] __ratelimit: 20 messages suppressed
> May 26 17:25:36 tarm kernel: [ 1397.125254] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:25:38 tarm kernel: [ 1399.625042] __ratelimit: 20 messages suppressed
> May 26 17:25:38 tarm kernel: [ 1399.625259] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:25:54 tarm kernel: [ 1415.625005] __ratelimit: 41 messages suppressed
> May 26 17:25:54 tarm kernel: [ 1415.625225] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:25:54 tarm kernel: [ 1415.625370] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:25:54 tarm kernel: [ 1415.625506] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:26:27 tarm kernel: [ 1448.625114] __ratelimit: 11 messages suppressed
> May 26 17:26:27 tarm kernel: [ 1448.625339] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:26:27 tarm kernel: [ 1448.625508] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:26:27 tarm kernel: [ 1448.625693] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:26:27 tarm kernel: [ 1448.625829] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:26:27 tarm kernel: [ 1448.625957] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:26:27 tarm kernel: [ 1448.626090] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:26:54 tarm kernel: [ 1476.125842] __ratelimit: 8 messages suppressed
> May 26 17:26:54 tarm kernel: [ 1476.126064] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:26:54 tarm kernel: [ 1476.126209] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:26:54 tarm kernel: [ 1476.126346] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:26:54 tarm kernel: [ 1476.126485] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:26:54 tarm kernel: [ 1476.126616] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:26:54 tarm kernel: [ 1476.126753] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:27:07 tarm kernel: [ 1488.625025] __ratelimit: 8 messages suppressed
> May 26 17:27:07 tarm kernel: [ 1488.625264] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:27:07 tarm kernel: [ 1488.625406] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:27:09 tarm kernel: [ 1491.128646] __ratelimit: 12 messages suppressed
> May 26 17:27:09 tarm kernel: [ 1491.128868] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:27:14 tarm kernel: [ 1496.125016] __ratelimit: 27 messages suppressed
> May 26 17:27:14 tarm kernel: [ 1496.125257] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:27:21 tarm kernel: [ 1502.625087] __ratelimit: 34 messages suppressed
> May 26 17:27:21 tarm kernel: [ 1502.625320] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:27:26 tarm kernel: [ 1507.625104] __ratelimit: 13 messages suppressed
> May 26 17:27:26 tarm kernel: [ 1507.625321] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:27:54 tarm kernel: [ 1536.125010] __ratelimit: 18 messages suppressed
> May 26 17:27:54 tarm kernel: [ 1536.125254] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:27:54 tarm kernel: [ 1536.125395] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:27:54 tarm kernel: [ 1536.125529] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:27:54 tarm kernel: [ 1536.125666] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:27:54 tarm kernel: [ 1536.125794] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:27:54 tarm kernel: [ 1536.125928] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:28:35 tarm kernel: [ 1577.125012] __ratelimit: 15 messages suppressed
> May 26 17:28:35 tarm kernel: [ 1577.125259] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:28:35 tarm kernel: [ 1577.125429] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:28:35 tarm kernel: [ 1577.125565] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:28:35 tarm kernel: [ 1577.125702] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:28:35 tarm kernel: [ 1577.125831] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:28:35 tarm kernel: [ 1577.125965] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:28:35 tarm kernel: [ 1577.126019] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:28:36 tarm kernel: [ 1577.625003] cpufreq-core: target for CPU 0: 914285 kHz, relation 0
> May 26 17:28:55 tarm kernel: [ 1596.625005] __ratelimit: 13 messages suppressed
> May 26 17:28:55 tarm kernel: [ 1596.625226] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:28:55 tarm kernel: [ 1596.625396] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:28:55 tarm kernel: [ 1596.625533] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:28:55 tarm kernel: [ 1596.625686] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:29:04 tarm kernel: [ 1605.626418] __ratelimit: 10 messages suppressed
> May 26 17:29:04 tarm kernel: [ 1605.626630] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:29:04 tarm kernel: [ 1605.626772] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:29:24 tarm kernel: [ 1625.625002] __ratelimit: 40 messages suppressed
> May 26 17:29:24 tarm kernel: [ 1625.625218] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:29:24 tarm kernel: [ 1625.625363] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:29:24 tarm kernel: [ 1625.625501] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:29:24 tarm kernel: [ 1625.625643] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:29:39 tarm kernel: [ 1641.125020] __ratelimit: 31 messages suppressed
> May 26 17:29:39 tarm kernel: [ 1641.125248] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:29:39 tarm kernel: [ 1641.125387] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:29:39 tarm kernel: [ 1641.125519] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:29:43 tarm kernel: [ 1644.624994] __ratelimit: 16 messages suppressed
> May 26 17:29:43 tarm kernel: [ 1644.625160] cpufreq-core: target for CPU 0: 152342 kHz, relation 0
> May 26 17:30:05 tarm kernel: [ 1666.625410] __ratelimit: 6 messages suppressed
> May 26 17:30:05 tarm kernel: [ 1666.625629] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:30:05 tarm kernel: [ 1666.625774] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:30:05 tarm kernel: [ 1666.625912] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:30:05 tarm kernel: [ 1666.626054] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:30:12 tarm kernel: [ 1674.125189] __ratelimit: 17 messages suppressed
> May 26 17:30:12 tarm kernel: [ 1674.125425] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:30:13 tarm kernel: [ 1674.624988] __ratelimit: 6 messages suppressed
> May 26 17:30:13 tarm kernel: [ 1674.625130] cpufreq-core: target for CPU 0: 0 kHz, relation 0
> May 26 17:30:18 tarm kernel: [ 1680.124993] __ratelimit: 13 messages suppressed
> May 26 17:30:18 tarm kernel: [ 1680.125137] cpufreq-core: target for CPU 0: 57142 kHz, relation 0
> May 26 17:30:23 tarm kernel: [ 1684.625011] __ratelimit: 41 messages suppressed
> May 26 17:30:23 tarm kernel: [ 1684.625238] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:30:25 tarm kernel: [ 1687.103612] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
> May 26 17:30:25 tarm kernel: [ 1687.103851] acpi-cpufreq: acpi_cpufreq_verify
> May 26 17:30:25 tarm kernel: [ 1687.103983] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 17:30:25 tarm kernel: [ 1687.104121] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 17:30:25 tarm kernel: [ 1687.104257] acpi-cpufreq: acpi_cpufreq_verify
> May 26 17:30:25 tarm kernel: [ 1687.104385] freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
> May 26 17:30:25 tarm kernel: [ 1687.104521] freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
> May 26 17:30:25 tarm kernel: [ 1687.104656] cpufreq-core: new min and max freqs are 800000 - 800000 kHz
> May 26 17:30:25 tarm kernel: [ 1687.104788] cpufreq-core: governor: change or update limits
> May 26 17:30:25 tarm kernel: [ 1687.105041] cpufreq-core: __cpufreq_governor for CPU 0, event 3
> May 26 17:30:33 tarm kernel: [ 1695.412124] __ratelimit: 25 messages suppressed
> May 26 17:30:33 tarm kernel: [ 1695.412329] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
> May 26 17:30:33 tarm kernel: [ 1695.412490] cpufreq-core: updating policy for CPU 0
> May 26 17:30:33 tarm kernel: [ 1695.412623] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
> May 26 17:30:33 tarm kernel: [ 1695.412757] acpi-cpufreq: acpi_cpufreq_verify
> May 26 17:30:33 tarm kernel: [ 1695.413087] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 17:30:33 tarm kernel: [ 1695.413265] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 17:30:33 tarm kernel: [ 1695.413402] acpi-cpufreq: acpi_cpufreq_verify
> May 26 17:30:33 tarm kernel: [ 1695.413529] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 17:30:33 tarm kernel: [ 1695.413664] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 17:30:33 tarm kernel: [ 1695.413798] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
> May 26 17:30:33 tarm kernel: [ 1695.413929] cpufreq-core: governor: change or update limits
> May 26 17:30:33 tarm kernel: [ 1695.414056] cpufreq-core: __cpufreq_governor for CPU 0, event 3
> May 26 17:30:51 tarm kernel: [ 1712.625338] __ratelimit: 3 messages suppressed
> May 26 17:30:51 tarm kernel: [ 1712.625566] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:30:51 tarm kernel: [ 1712.625711] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:30:51 tarm kernel: [ 1712.625863] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:30:55 tarm kernel: [ 1716.625004] __ratelimit: 11 messages suppressed
> May 26 17:30:55 tarm kernel: [ 1716.625234] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:30:58 tarm kernel: [ 1719.625020] __ratelimit: 20 messages suppressed
> May 26 17:30:58 tarm kernel: [ 1719.625245] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:31:08 tarm kernel: [ 1729.625013] __ratelimit: 20 messages suppressed
> May 26 17:31:08 tarm kernel: [ 1729.625257] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:31:08 tarm kernel: [ 1729.625405] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:31:55 tarm kernel: [ 1777.125078] __ratelimit: 33 messages suppressed
> May 26 17:31:55 tarm kernel: [ 1777.125305] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:31:55 tarm kernel: [ 1777.125462] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:31:55 tarm kernel: [ 1777.125596] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:31:55 tarm kernel: [ 1777.125733] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:31:55 tarm kernel: [ 1777.125862] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:31:55 tarm kernel: [ 1777.126989] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:31:55 tarm kernel: [ 1777.127043] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:31:56 tarm kernel: [ 1777.625029] cpufreq-core: target for CPU 0: 1257142 kHz, relation 0
> May 26 17:31:56 tarm kernel: [ 1777.625190] acpi-cpufreq: acpi_cpufreq_target 1257142 (0)
> May 26 17:32:08 tarm kernel: [ 1789.625048] __ratelimit: 12 messages suppressed
> May 26 17:32:08 tarm kernel: [ 1789.625277] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:32:08 tarm kernel: [ 1789.625420] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:32:08 tarm kernel: [ 1789.625554] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:32:27 tarm kernel: [ 1808.625076] __ratelimit: 23 messages suppressed
> May 26 17:32:27 tarm kernel: [ 1808.625314] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:32:27 tarm kernel: [ 1808.625477] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:32:27 tarm kernel: [ 1808.625611] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:32:28 tarm kernel: [ 1809.625036] __ratelimit: 11 messages suppressed
> May 26 17:32:28 tarm kernel: [ 1809.625204] cpufreq-core: target for CPU 0: 594285 kHz, relation 0
> May 26 17:32:55 tarm kernel: [ 1837.125529] __ratelimit: 6 messages suppressed
> May 26 17:32:55 tarm kernel: [ 1837.125771] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:32:55 tarm kernel: [ 1837.125927] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:32:55 tarm kernel: [ 1837.126060] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:32:55 tarm kernel: [ 1837.126220] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:32:55 tarm kernel: [ 1837.126384] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:33:08 tarm kernel: [ 1850.124998] __ratelimit: 9 messages suppressed
> May 26 17:33:08 tarm kernel: [ 1850.125223] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:33:08 tarm kernel: [ 1850.125389] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:33:08 tarm kernel: [ 1850.125546] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:33:15 tarm kernel: [ 1856.625076] __ratelimit: 11 messages suppressed
> May 26 17:33:15 tarm kernel: [ 1856.625322] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:33:22 tarm kernel: [ 1864.124999] __ratelimit: 13 messages suppressed
> May 26 17:33:22 tarm kernel: [ 1864.125220] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:33:23 tarm kernel: [ 1864.624994] __ratelimit: 6 messages suppressed
> May 26 17:33:23 tarm kernel: [ 1864.625132] cpufreq-core: target for CPU 0: 0 kHz, relation 0
> May 26 17:33:37 tarm kernel: [ 1878.625014] __ratelimit: 60 messages suppressed
> May 26 17:33:37 tarm kernel: [ 1878.625252] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:33:37 tarm kernel: [ 1878.625420] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:33:38 tarm kernel: [ 1879.624989] __ratelimit: 10 messages suppressed
> May 26 17:33:38 tarm kernel: [ 1879.625128] cpufreq-core: target for CPU 0: 228571 kHz, relation 0
> May 26 17:33:43 tarm kernel: [ 1884.626773] __ratelimit: 20 messages suppressed
> May 26 17:33:43 tarm kernel: [ 1884.626985] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:33:49 tarm kernel: [ 1891.128517] __ratelimit: 34 messages suppressed
> May 26 17:33:49 tarm kernel: [ 1891.128729] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:33:53 tarm kernel: [ 1894.624989] __ratelimit: 27 messages suppressed
> May 26 17:33:53 tarm kernel: [ 1894.625138] cpufreq-core: target for CPU 0: 914285 kHz, relation 0
> May 26 17:34:10 tarm kernel: [ 1911.625009] __ratelimit: 27 messages suppressed
> May 26 17:34:10 tarm kernel: [ 1911.625242] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:34:10 tarm kernel: [ 1911.625381] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:34:10 tarm kernel: [ 1911.625513] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:34:57 tarm kernel: [ 1959.125001] __ratelimit: 25 messages suppressed
> May 26 17:34:57 tarm kernel: [ 1959.125227] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:34:57 tarm kernel: [ 1959.125397] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:34:57 tarm kernel: [ 1959.125532] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:34:57 tarm kernel: [ 1959.125670] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:34:57 tarm kernel: [ 1959.125798] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:34:57 tarm kernel: [ 1959.125931] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:34:57 tarm kernel: [ 1959.125986] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:34:58 tarm kernel: [ 1959.624990] cpufreq-core: target for CPU 0: 1257142 kHz, relation 0
> May 26 17:34:58 tarm kernel: [ 1959.625142] acpi-cpufreq: acpi_cpufreq_target 1257142 (0)
> May 26 17:34:58 tarm kernel: [ 1959.625221] freq-table: request for target 1257142 kHz (relation: 0) for cpu 0
> May 26 17:35:03 tarm kernel: [ 1964.624997] __ratelimit: 39 messages suppressed
> May 26 17:35:03 tarm kernel: [ 1964.625162] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:35:09 tarm kernel: [ 1970.625110] __ratelimit: 34 messages suppressed
> May 26 17:35:09 tarm kernel: [ 1970.625347] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:35:13 tarm kernel: [ 1974.625010] __ratelimit: 39 messages suppressed
> May 26 17:35:13 tarm kernel: [ 1974.625164] cpufreq-core: target for CPU 0: 914285 kHz, relation 0
> May 26 17:35:18 tarm kernel: [ 1979.624990] __ratelimit: 27 messages suppressed
> May 26 17:35:18 tarm kernel: [ 1979.625150] cpufreq-core: target for CPU 0: 137142 kHz, relation 0
> May 26 17:35:23 tarm kernel: [ 1984.625099] __ratelimit: 13 messages suppressed
> May 26 17:35:23 tarm kernel: [ 1984.625242] cpufreq-core: target for CPU 0: 228571 kHz, relation 0
> May 26 17:35:28 tarm kernel: [ 1989.625013] __ratelimit: 20 messages suppressed
> May 26 17:35:28 tarm kernel: [ 1989.625247] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:35:53 tarm kernel: [ 2014.625029] __ratelimit: 13 messages suppressed
> May 26 17:35:53 tarm kernel: [ 2014.625260] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:35:53 tarm kernel: [ 2014.625408] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:35:53 tarm kernel: [ 2014.625545] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:35:53 tarm kernel: [ 2014.625688] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:35:53 tarm kernel: [ 2014.625830] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:35:58 tarm kernel: [ 2020.124991] __ratelimit: 49 messages suppressed
> May 26 17:35:58 tarm kernel: [ 2020.125144] cpufreq-core: target for CPU 0: 960000 kHz, relation 0
> May 26 17:36:04 tarm kernel: [ 2025.625733] __ratelimit: 27 messages suppressed
> May 26 17:36:04 tarm kernel: [ 2025.625970] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:36:08 tarm kernel: [ 2030.124999] __ratelimit: 27 messages suppressed
> May 26 17:36:08 tarm kernel: [ 2030.125208] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:36:45 tarm kernel: [ 2066.624998] __ratelimit: 13 messages suppressed
> May 26 17:36:45 tarm kernel: [ 2066.625471] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:36:45 tarm kernel: [ 2066.625649] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:36:45 tarm kernel: [ 2066.625789] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:36:45 tarm kernel: [ 2066.625927] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:36:45 tarm kernel: [ 2066.626087] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:36:45 tarm kernel: [ 2066.626225] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:36:45 tarm kernel: [ 2066.626279] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:36:56 tarm kernel: [ 2077.625025] __ratelimit: 21 messages suppressed
> May 26 17:36:56 tarm kernel: [ 2077.625259] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:36:56 tarm kernel: [ 2077.625402] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:37:32 tarm kernel: [ 2114.125331] __ratelimit: 12 messages suppressed
> May 26 17:37:32 tarm kernel: [ 2114.125558] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:37:32 tarm kernel: [ 2114.125703] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:37:32 tarm kernel: [ 2114.125839] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:37:32 tarm kernel: [ 2114.125978] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:37:32 tarm kernel: [ 2114.126110] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:37:32 tarm kernel: [ 2114.126249] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:37:32 tarm kernel: [ 2114.126305] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:37:33 tarm kernel: [ 2114.624991] cpufreq-core: target for CPU 0: 1771428 kHz, relation 0
> May 26 17:37:38 tarm kernel: [ 2120.125076] __ratelimit: 11 messages suppressed
> May 26 17:37:38 tarm kernel: [ 2120.125306] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:37:43 tarm kernel: [ 2124.625018] __ratelimit: 27 messages suppressed
> May 26 17:37:43 tarm kernel: [ 2124.625164] cpufreq-core: target for CPU 0: 514285 kHz, relation 0
> May 26 17:37:51 tarm kernel: [ 2133.125018] __ratelimit: 6 messages suppressed
> May 26 17:37:51 tarm kernel: [ 2133.125274] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:37:53 tarm kernel: [ 2135.124987] __ratelimit: 20 messages suppressed
> May 26 17:37:53 tarm kernel: [ 2135.125133] cpufreq-core: target for CPU 0: 400000 kHz, relation 0
> May 26 17:38:08 tarm kernel: [ 2150.125024] __ratelimit: 20 messages suppressed
> May 26 17:38:08 tarm kernel: [ 2150.125263] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:38:08 tarm kernel: [ 2150.125406] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:38:08 tarm kernel: [ 2150.125541] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:38:44 tarm kernel: [ 2186.125030] __ratelimit: 39 messages suppressed
> May 26 17:38:44 tarm kernel: [ 2186.125274] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:38:44 tarm kernel: [ 2186.125419] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:38:44 tarm kernel: [ 2186.125554] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:38:44 tarm kernel: [ 2186.125692] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:38:44 tarm kernel: [ 2186.125950] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:38:44 tarm kernel: [ 2186.126086] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:38:44 tarm kernel: [ 2186.126140] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:39:42 tarm kernel: [ 2244.125003] __ratelimit: 7 messages suppressed
> May 26 17:39:42 tarm kernel: [ 2244.125386] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:39:42 tarm kernel: [ 2244.125533] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:39:42 tarm kernel: [ 2244.125668] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:39:42 tarm kernel: [ 2244.125805] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:39:42 tarm kernel: [ 2244.125933] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:39:42 tarm kernel: [ 2244.126067] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:39:42 tarm kernel: [ 2244.126122] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:39:43 tarm kernel: [ 2244.624993] cpufreq-core: target for CPU 0: 1142857 kHz, relation 0
> May 26 17:39:43 tarm kernel: [ 2244.625151] acpi-cpufreq: acpi_cpufreq_target 1142857 (0)
> May 26 17:39:43 tarm kernel: [ 2244.625231] freq-table: request for target 1142857 kHz (relation: 0) for cpu 0
> May 26 17:39:47 tarm kernel: [ 2249.124999] __ratelimit: 11 messages suppressed
> May 26 17:39:47 tarm kernel: [ 2249.125216] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:39:55 tarm kernel: [ 2257.125017] __ratelimit: 27 messages suppressed
> May 26 17:39:55 tarm kernel: [ 2257.125257] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:39:57 tarm kernel: [ 2259.124988] __ratelimit: 20 messages suppressed
> May 26 17:39:57 tarm kernel: [ 2259.125137] cpufreq-core: target for CPU 0: 342857 kHz, relation 0
> May 26 17:40:03 tarm kernel: [ 2264.625779] __ratelimit: 6 messages suppressed
> May 26 17:40:03 tarm kernel: [ 2264.626008] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:40:08 tarm kernel: [ 2269.625005] __ratelimit: 13 messages suppressed
> May 26 17:40:08 tarm kernel: [ 2269.625224] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:40:16 tarm kernel: [ 2277.625001] __ratelimit: 13 messages suppressed
> May 26 17:40:16 tarm kernel: [ 2277.625225] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:40:57 tarm kernel: [ 2318.625170] __ratelimit: 13 messages suppressed
> May 26 17:40:57 tarm kernel: [ 2318.625402] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:40:57 tarm kernel: [ 2318.625545] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:40:57 tarm kernel: [ 2318.625680] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:40:57 tarm kernel: [ 2318.625833] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:40:57 tarm kernel: [ 2318.625962] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:40:57 tarm kernel: [ 2318.626095] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:40:57 tarm kernel: [ 2318.626149] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:40:57 tarm kernel: [ 2319.124990] cpufreq-core: target for CPU 0: 400000 kHz, relation 0
> May 26 17:40:57 tarm kernel: [ 2319.125141] acpi-cpufreq: acpi_cpufreq_target 400000 (0)
> May 26 17:41:07 tarm kernel: [ 2329.125011] __ratelimit: 5 messages suppressed
> May 26 17:41:07 tarm kernel: [ 2329.125242] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:41:07 tarm kernel: [ 2329.125381] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:41:13 tarm kernel: [ 2334.625002] __ratelimit: 33 messages suppressed
> May 26 17:41:13 tarm kernel: [ 2334.625220] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:41:19 tarm kernel: [ 2340.625925] __ratelimit: 27 messages suppressed
> May 26 17:41:19 tarm kernel: [ 2340.626164] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:41:22 tarm kernel: [ 2344.125010] __ratelimit: 27 messages suppressed
> May 26 17:41:22 tarm kernel: [ 2344.125242] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:42:05 tarm kernel: [ 2386.625014] __ratelimit: 41 messages suppressed
> May 26 17:42:05 tarm kernel: [ 2386.625238] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:42:05 tarm kernel: [ 2386.625411] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:42:05 tarm kernel: [ 2386.625548] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:42:05 tarm kernel: [ 2386.625689] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:42:05 tarm kernel: [ 2386.625818] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:42:05 tarm kernel: [ 2386.626082] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:42:05 tarm kernel: [ 2386.626137] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:42:05 tarm kernel: [ 2387.124995] cpufreq-core: target for CPU 0: 114285 kHz, relation 0
> May 26 17:42:23 tarm kernel: [ 2405.126157] __ratelimit: 6 messages suppressed
> May 26 17:42:23 tarm kernel: [ 2405.126390] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:42:23 tarm kernel: [ 2405.126536] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:42:23 tarm kernel: [ 2405.126671] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:42:23 tarm kernel: [ 2405.126810] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:42:27 tarm kernel: [ 2409.124997] __ratelimit: 31 messages suppressed
> May 26 17:42:27 tarm kernel: [ 2409.125156] cpufreq-core: target for CPU 0: 960000 kHz, relation 0
> May 26 17:42:57 tarm kernel: [ 2439.125015] __ratelimit: 13 messages suppressed
> May 26 17:42:57 tarm kernel: [ 2439.125247] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:42:57 tarm kernel: [ 2439.125392] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:42:57 tarm kernel: [ 2439.125526] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:42:57 tarm kernel: [ 2439.125664] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:42:57 tarm kernel: [ 2439.125792] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:42:57 tarm kernel: [ 2439.125926] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:44:08 tarm kernel: [ 2509.627811] __ratelimit: 15 messages suppressed
> May 26 17:44:08 tarm kernel: [ 2509.628028] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:44:08 tarm kernel: [ 2509.628172] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:44:08 tarm kernel: [ 2509.628479] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:44:08 tarm kernel: [ 2509.628623] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:44:08 tarm kernel: [ 2509.628782] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:44:08 tarm kernel: [ 2509.628934] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:44:08 tarm kernel: [ 2509.629114] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:44:08 tarm kernel: [ 2510.128990] cpufreq-core: target for CPU 0: 1200000 kHz, relation 0
> May 26 17:44:08 tarm kernel: [ 2510.129147] acpi-cpufreq: acpi_cpufreq_target 1200000 (0)
> May 26 17:44:08 tarm kernel: [ 2510.129225] freq-table: request for target 1200000 kHz (relation: 0) for cpu 0
> May 26 17:45:53 tarm kernel: [ 2614.625003] __ratelimit: 11 messages suppressed
> May 26 17:45:53 tarm kernel: [ 2614.625214] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:45:53 tarm kernel: [ 2614.625359] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:45:53 tarm kernel: [ 2614.625497] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:45:53 tarm kernel: [ 2614.625638] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:45:53 tarm kernel: [ 2614.625773] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:45:53 tarm kernel: [ 2614.625914] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:45:53 tarm kernel: [ 2614.625971] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:45:53 tarm kernel: [ 2615.124994] cpufreq-core: target for CPU 0: 0 kHz, relation 0
> May 26 17:45:53 tarm kernel: [ 2615.125153] acpi-cpufreq: acpi_cpufreq_target 0 (0)
> May 26 17:45:53 tarm kernel: [ 2615.125213] freq-table: request for target 0 kHz (relation: 0) for cpu 0
> May 26 17:45:58 tarm kernel: [ 2620.125038] __ratelimit: 4 messages suppressed
> May 26 17:45:58 tarm kernel: [ 2620.125262] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:46:30 tarm kernel: [ 2652.125063] __ratelimit: 13 messages suppressed
> May 26 17:46:30 tarm kernel: [ 2652.125294] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:46:30 tarm kernel: [ 2652.125434] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:46:30 tarm kernel: [ 2652.125566] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:46:30 tarm kernel: [ 2652.125702] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:46:30 tarm kernel: [ 2652.125831] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:46:30 tarm kernel: [ 2652.125965] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:47:03 tarm kernel: [ 2684.630045] __ratelimit: 8 messages suppressed
> May 26 17:47:03 tarm kernel: [ 2684.630290] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:47:03 tarm kernel: [ 2684.630432] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:47:03 tarm kernel: [ 2684.630565] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:47:03 tarm kernel: [ 2684.630702] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:47:03 tarm kernel: [ 2684.630832] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:47:03 tarm kernel: [ 2684.630968] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:47:03 tarm kernel: [ 2684.631023] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:47:24 tarm kernel: [ 2706.124999] __ratelimit: 7 messages suppressed
> May 26 17:47:24 tarm kernel: [ 2706.125221] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:47:24 tarm kernel: [ 2706.125385] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:47:24 tarm kernel: [ 2706.125520] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:47:24 tarm kernel: [ 2706.125658] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:47:58 tarm kernel: [ 2740.124998] __ratelimit: 10 messages suppressed
> May 26 17:47:58 tarm kernel: [ 2740.125220] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:47:58 tarm kernel: [ 2740.125409] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:47:58 tarm kernel: [ 2740.125545] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:47:58 tarm kernel: [ 2740.125683] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:47:58 tarm kernel: [ 2740.125811] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:47:58 tarm kernel: [ 2740.125946] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:47:58 tarm kernel: [ 2740.126000] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:48:09 tarm kernel: [ 2751.125047] __ratelimit: 21 messages suppressed
> May 26 17:48:09 tarm kernel: [ 2751.125269] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:48:09 tarm kernel: [ 2751.125434] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:48:58 tarm kernel: [ 2800.125099] __ratelimit: 33 messages suppressed
> May 26 17:48:58 tarm kernel: [ 2800.125338] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:48:58 tarm kernel: [ 2800.125482] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:48:58 tarm kernel: [ 2800.125617] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:48:58 tarm kernel: [ 2800.125756] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:48:58 tarm kernel: [ 2800.125886] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:48:58 tarm kernel: [ 2800.126021] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:48:58 tarm kernel: [ 2800.126075] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:48:59 tarm kernel: [ 2801.124990] cpufreq-core: target for CPU 0: 285714 kHz, relation 0
> May 26 17:48:59 tarm kernel: [ 2801.125146] acpi-cpufreq: acpi_cpufreq_target 285714 (0)
> May 26 17:48:59 tarm kernel: [ 2801.125221] freq-table: request for target 285714 kHz (relation: 0) for cpu 0
> May 26 17:49:05 tarm kernel: [ 2806.625051] __ratelimit: 4 messages suppressed
> May 26 17:49:05 tarm kernel: [ 2806.625274] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:49:36 tarm kernel: [ 2837.625751] __ratelimit: 13 messages suppressed
> May 26 17:49:36 tarm kernel: [ 2837.625989] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:49:36 tarm kernel: [ 2837.626134] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:49:36 tarm kernel: [ 2837.626432] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:49:36 tarm kernel: [ 2837.626578] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:49:36 tarm kernel: [ 2837.626711] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:49:36 tarm kernel: [ 2837.626849] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:49:48 tarm kernel: [ 2850.125068] __ratelimit: 8 messages suppressed
> May 26 17:49:48 tarm kernel: [ 2850.125309] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:49:48 tarm kernel: [ 2850.125449] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:49:48 tarm kernel: [ 2850.125581] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:50:37 tarm kernel: [ 2898.625001] __ratelimit: 11 messages suppressed
> May 26 17:50:37 tarm kernel: [ 2898.625247] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:50:37 tarm kernel: [ 2898.625393] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:50:37 tarm kernel: [ 2898.625543] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:50:37 tarm kernel: [ 2898.625682] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:50:37 tarm kernel: [ 2898.625811] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:50:37 tarm kernel: [ 2898.625945] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:50:37 tarm kernel: [ 2898.625999] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:50:37 tarm kernel: [ 2899.124989] cpufreq-core: target for CPU 0: 0 kHz, relation 0
> May 26 17:50:37 tarm kernel: [ 2899.125144] acpi-cpufreq: acpi_cpufreq_target 0 (0)
> May 26 17:51:20 tarm kernel: [ 2941.625016] __ratelimit: 5 messages suppressed
> May 26 17:51:20 tarm kernel: [ 2941.625237] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:51:20 tarm kernel: [ 2941.625406] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:51:20 tarm kernel: [ 2941.625546] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:51:20 tarm kernel: [ 2941.625689] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:51:20 tarm kernel: [ 2941.625824] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:51:20 tarm kernel: [ 2941.626027] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:51:20 tarm kernel: [ 2941.626285] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:51:20 tarm kernel: [ 2942.124990] cpufreq-core: target for CPU 0: 1085714 kHz, relation 0
> May 26 17:51:20 tarm kernel: [ 2942.125146] acpi-cpufreq: acpi_cpufreq_target 1085714 (0)
> May 26 17:51:23 tarm kernel: [ 2945.124994] __ratelimit: 31 messages suppressed
> May 26 17:51:23 tarm kernel: [ 2945.125180] cpufreq-core: target for CPU 0: 944171 kHz, relation 0
> May 26 17:51:28 tarm kernel: [ 2950.124996] __ratelimit: 37 messages suppressed
> May 26 17:51:28 tarm kernel: [ 2950.125182] cpufreq-core: target for CPU 0: 852800 kHz, relation 0
> May 26 17:51:55 tarm kernel: [ 2977.125010] __ratelimit: 26 messages suppressed
> May 26 17:51:55 tarm kernel: [ 2977.125244] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:51:55 tarm kernel: [ 2977.125384] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:51:55 tarm kernel: [ 2977.125516] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:51:55 tarm kernel: [ 2977.125652] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:51:55 tarm kernel: [ 2977.125806] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:51:58 tarm kernel: [ 2980.125002] __ratelimit: 30 messages suppressed
> May 26 17:51:58 tarm kernel: [ 2980.125197] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:52:03 tarm kernel: [ 2984.753859] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
> May 26 17:52:03 tarm kernel: [ 2984.754110] acpi-cpufreq: acpi_cpufreq_verify
> May 26 17:52:03 tarm kernel: [ 2984.754246] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 17:52:03 tarm kernel: [ 2984.754387] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 17:52:03 tarm kernel: [ 2984.754526] acpi-cpufreq: acpi_cpufreq_verify
> May 26 17:52:03 tarm kernel: [ 2984.754657] freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
> May 26 17:52:03 tarm kernel: [ 2984.754935] freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
> May 26 17:52:03 tarm kernel: [ 2984.755073] cpufreq-core: new min and max freqs are 800000 - 800000 kHz
> May 26 17:52:03 tarm kernel: [ 2984.755208] cpufreq-core: governor: change or update limits
> May 26 17:52:03 tarm kernel: [ 2984.755339] cpufreq-core: __cpufreq_governor for CPU 0, event 3
> May 26 17:52:15 tarm kernel: [ 2997.184583] __ratelimit: 39 messages suppressed
> May 26 17:52:15 tarm kernel: [ 2997.184789] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
> May 26 17:52:15 tarm kernel: [ 2997.185072] cpufreq-core: updating policy for CPU 0
> May 26 17:52:15 tarm kernel: [ 2997.185310] acpi-cpufreq: get_cur_freq_on_cpu (0)
> May 26 17:52:15 tarm kernel: [ 2997.185448] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
> May 26 17:52:15 tarm kernel: [ 2997.185583] acpi-cpufreq: acpi_cpufreq_verify
> May 26 17:52:15 tarm kernel: [ 2997.185710] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 17:52:15 tarm kernel: [ 2997.185846] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 17:52:15 tarm kernel: [ 2997.186002] acpi-cpufreq: acpi_cpufreq_verify
> May 26 17:52:15 tarm kernel: [ 2997.186153] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 17:52:15 tarm kernel: [ 2997.186289] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 17:52:15 tarm kernel: [ 2997.186423] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
> May 26 17:52:15 tarm kernel: [ 2997.186555] cpufreq-core: governor: change or update limits
> May 26 17:52:15 tarm kernel: [ 2997.186682] cpufreq-core: __cpufreq_governor for CPU 0, event 3
> May 26 17:53:50 tarm kernel: [ 3091.625021] __ratelimit: 2 messages suppressed
> May 26 17:53:50 tarm kernel: [ 3091.625236] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:53:50 tarm kernel: [ 3091.625380] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:53:50 tarm kernel: [ 3091.625514] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:53:50 tarm kernel: [ 3091.625653] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:53:50 tarm kernel: [ 3091.625785] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:53:50 tarm kernel: [ 3091.626086] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:53:50 tarm kernel: [ 3091.626142] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:53:50 tarm kernel: [ 3092.124989] cpufreq-core: target for CPU 0: 171428 kHz, relation 0
> May 26 17:53:50 tarm kernel: [ 3092.125141] acpi-cpufreq: acpi_cpufreq_target 171428 (0)
> May 26 17:53:50 tarm kernel: [ 3092.125227] freq-table: request for target 171428 kHz (relation: 0) for cpu 0
> May 26 17:54:23 tarm kernel: [ 3125.125835] __ratelimit: 4 messages suppressed
> May 26 17:54:23 tarm kernel: [ 3125.126073] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:54:23 tarm kernel: [ 3125.126214] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:54:23 tarm kernel: [ 3125.126374] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:54:23 tarm kernel: [ 3125.126511] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:54:23 tarm kernel: [ 3125.126639] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:54:23 tarm kernel: [ 3125.126772] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:54:25 tarm kernel: [ 3126.625001] __ratelimit: 15 messages suppressed
> May 26 17:54:25 tarm kernel: [ 3126.625156] cpufreq-core: target for CPU 0: 1600000 kHz, relation 0
> May 26 17:54:59 tarm kernel: [ 3161.125068] __ratelimit: 13 messages suppressed
> May 26 17:54:59 tarm kernel: [ 3161.125422] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:54:59 tarm kernel: [ 3161.125563] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:54:59 tarm kernel: [ 3161.125695] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:54:59 tarm kernel: [ 3161.125831] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:54:59 tarm kernel: [ 3161.125960] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:54:59 tarm kernel: [ 3161.126189] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:55:00 tarm kernel: [ 3161.624989] __ratelimit: 1 messages suppressed
> May 26 17:55:00 tarm kernel: [ 3161.625138] cpufreq-core: target for CPU 0: 628571 kHz, relation 0
> May 26 17:57:59 tarm kernel: [ 3341.125000] __ratelimit: 20 messages suppressed
> May 26 17:57:59 tarm kernel: [ 3341.125237] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:57:59 tarm kernel: [ 3341.125407] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:57:59 tarm kernel: [ 3341.125542] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:57:59 tarm kernel: [ 3341.125680] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:57:59 tarm kernel: [ 3341.125808] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:57:59 tarm kernel: [ 3341.125941] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 17:57:59 tarm kernel: [ 3341.126003] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 17:58:00 tarm kernel: [ 3342.124989] cpufreq-core: target for CPU 0: 0 kHz, relation 0
> May 26 17:58:00 tarm kernel: [ 3342.125176] acpi-cpufreq: acpi_cpufreq_target 0 (0)
> May 26 17:58:00 tarm kernel: [ 3342.125238] freq-table: request for target 0 kHz (relation: 0) for cpu 0
> May 26 17:58:09 tarm kernel: [ 3350.625020] __ratelimit: 4 messages suppressed
> May 26 17:58:09 tarm kernel: [ 3350.625222] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:58:11 tarm kernel: [ 3353.124988] __ratelimit: 6 messages suppressed
> May 26 17:58:11 tarm kernel: [ 3353.125210] cpufreq-core: target for CPU 0: 1600000 kHz, relation 0
> May 26 17:58:16 tarm kernel: [ 3357.625011] __ratelimit: 13 messages suppressed
> May 26 17:58:16 tarm kernel: [ 3357.625238] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:58:20 tarm kernel: [ 3361.625052] __ratelimit: 39 messages suppressed
> May 26 17:58:20 tarm kernel: [ 3361.625267] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:58:24 tarm kernel: [ 3366.125013] __ratelimit: 48 messages suppressed
> May 26 17:58:24 tarm kernel: [ 3366.125240] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:58:27 tarm kernel: [ 3368.864167] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
> May 26 17:58:27 tarm kernel: [ 3368.864411] acpi-cpufreq: acpi_cpufreq_verify
> May 26 17:58:27 tarm kernel: [ 3368.864544] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 17:58:27 tarm kernel: [ 3368.864681] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 17:58:27 tarm kernel: [ 3368.864816] acpi-cpufreq: acpi_cpufreq_verify
> May 26 17:58:27 tarm kernel: [ 3368.864944] freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
> May 26 17:58:27 tarm kernel: [ 3368.865130] freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
> May 26 17:58:27 tarm kernel: [ 3368.865297] cpufreq-core: new min and max freqs are 800000 - 800000 kHz
> May 26 17:58:27 tarm kernel: [ 3368.865433] cpufreq-core: governor: change or update limits
> May 26 17:58:27 tarm kernel: [ 3368.865564] cpufreq-core: __cpufreq_governor for CPU 0, event 3
> May 26 17:58:43 tarm kernel: [ 3385.479447] __ratelimit: 30 messages suppressed
> May 26 17:58:43 tarm kernel: [ 3385.479651] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
> May 26 17:58:43 tarm kernel: [ 3385.479810] cpufreq-core: updating policy for CPU 0
> May 26 17:58:43 tarm kernel: [ 3385.479938] acpi-cpufreq: get_cur_freq_on_cpu (0)
> May 26 17:58:43 tarm kernel: [ 3385.480067] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
> May 26 17:58:43 tarm kernel: [ 3385.480199] acpi-cpufreq: acpi_cpufreq_verify
> May 26 17:58:43 tarm kernel: [ 3385.480325] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 17:58:43 tarm kernel: [ 3385.480459] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 17:58:43 tarm kernel: [ 3385.480591] acpi-cpufreq: acpi_cpufreq_verify
> May 26 17:58:43 tarm kernel: [ 3385.480716] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 17:58:43 tarm kernel: [ 3385.480850] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 17:58:43 tarm kernel: [ 3385.481074] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
> May 26 17:58:43 tarm kernel: [ 3385.481231] cpufreq-core: governor: change or update limits
> May 26 17:58:43 tarm kernel: [ 3385.481361] cpufreq-core: __cpufreq_governor for CPU 0, event 3
> May 26 17:59:07 tarm kernel: [ 3408.625001] __ratelimit: 2 messages suppressed
> May 26 17:59:07 tarm kernel: [ 3408.625221] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:59:07 tarm kernel: [ 3408.625385] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:59:07 tarm kernel: [ 3408.625519] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:59:07 tarm kernel: [ 3408.625677] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:59:07 tarm kernel: [ 3408.625803] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:59:10 tarm kernel: [ 3411.625026] __ratelimit: 9 messages suppressed
> May 26 17:59:10 tarm kernel: [ 3411.625265] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:59:36 tarm kernel: [ 3438.125078] __ratelimit: 13 messages suppressed
> May 26 17:59:36 tarm kernel: [ 3438.125317] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:59:36 tarm kernel: [ 3438.125536] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 17:59:36 tarm kernel: [ 3438.125667] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 17:59:36 tarm kernel: [ 3438.125799] freq-table: target is 0 (2000000 kHz, 0)
> May 26 17:59:36 tarm kernel: [ 3438.127191] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 17:59:39 tarm kernel: [ 3441.125011] __ratelimit: 16 messages suppressed
> May 26 17:59:39 tarm kernel: [ 3441.125163] cpufreq-core: target for CPU 0: 571428 kHz, relation 0
> May 26 17:59:44 tarm kernel: [ 3446.129064] __ratelimit: 51 messages suppressed
> May 26 17:59:44 tarm kernel: [ 3446.129319] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 17:59:50 tarm kernel: [ 3451.625003] __ratelimit: 39 messages suppressed
> May 26 17:59:50 tarm kernel: [ 3451.625174] cpufreq-core: target for CPU 0: 1142857 kHz, relation 0
> May 26 17:59:54 tarm kernel: [ 3456.079363] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
> May 26 17:59:54 tarm kernel: [ 3456.079519] acpi-cpufreq: acpi_cpufreq_verify
> May 26 17:59:54 tarm kernel: [ 3456.079577] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 17:59:54 tarm kernel: [ 3456.079647] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 17:59:54 tarm kernel: [ 3456.079707] acpi-cpufreq: acpi_cpufreq_verify
> May 26 17:59:54 tarm kernel: [ 3456.079762] freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
> May 26 17:59:54 tarm kernel: [ 3456.079821] freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
> May 26 17:59:54 tarm kernel: [ 3456.079879] cpufreq-core: new min and max freqs are 800000 - 800000 kHz
> May 26 17:59:54 tarm kernel: [ 3456.079936] cpufreq-core: governor: change or update limits
> May 26 17:59:54 tarm kernel: [ 3456.079992] cpufreq-core: __cpufreq_governor for CPU 0, event 3
> May 26 17:59:54 tarm kernel: [ 3456.080058] cpufreq-core: target for CPU 0: 800000 kHz, relation 1
> May 26 17:59:54 tarm kernel: [ 3456.080114] acpi-cpufreq: acpi_cpufreq_target 800000 (0)
> May 26 17:59:54 tarm kernel: [ 3456.080196] freq-table: request for target 800000 kHz (relation: 1) for cpu 0
> May 26 17:59:54 tarm kernel: [ 3456.080254] freq-table: target is 4 (800000 kHz, 4)
> May 26 17:59:54 tarm kernel: [ 3456.080310] cpufreq-core: notification 0 of frequency transition to 800000 kHz
> May 26 17:59:54 tarm kernel: [ 3456.080385] cpufreq-core: notification 1 of frequency transition to 800000 kHz
> May 26 17:59:54 tarm kernel: [ 3456.080439] cpufreq-core: scaling loops_per_jiffy to 3195449 for frequency 800000 kHz
> May 26 18:02:15 tarm kernel: [ 3597.291132] __ratelimit: 39 messages suppressed
> May 26 18:02:15 tarm kernel: [ 3597.291342] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
> May 26 18:02:15 tarm kernel: [ 3597.291480] cpufreq-core: updating policy for CPU 0
> May 26 18:02:15 tarm kernel: [ 3597.291608] acpi-cpufreq: get_cur_freq_on_cpu (0)
> May 26 18:02:15 tarm kernel: [ 3597.291734] acpi-cpufreq: get_cur_val = 100664850
> May 26 18:02:15 tarm kernel: [ 3597.291859] acpi-cpufreq: cur freq = 800000
> May 26 18:02:15 tarm kernel: [ 3597.291984] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
> May 26 18:02:15 tarm kernel: [ 3597.292116] acpi-cpufreq: acpi_cpufreq_verify
> May 26 18:02:15 tarm kernel: [ 3597.292241] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 18:02:15 tarm kernel: [ 3597.292377] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 18:02:15 tarm kernel: [ 3597.292546] acpi-cpufreq: acpi_cpufreq_verify
> May 26 18:02:15 tarm kernel: [ 3597.292675] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 18:02:15 tarm kernel: [ 3597.292812] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 18:02:15 tarm kernel: [ 3597.293470] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
> May 26 18:02:15 tarm kernel: [ 3597.293635] cpufreq-core: governor: change or update limits
> May 26 18:02:15 tarm kernel: [ 3597.293768] cpufreq-core: __cpufreq_governor for CPU 0, event 3
> May 26 18:02:17 tarm kernel: [ 3598.625022] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:02:17 tarm kernel: [ 3598.625266] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 18:02:17 tarm kernel: [ 3598.625404] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 18:02:17 tarm kernel: [ 3598.625541] freq-table: target is 0 (2000000 kHz, 0)
> May 26 18:02:17 tarm kernel: [ 3598.625671] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 18:02:21 tarm kernel: [ 3602.625004] __ratelimit: 28 messages suppressed
> May 26 18:02:21 tarm kernel: [ 3602.625238] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:02:26 tarm kernel: [ 3607.627568] __ratelimit: 39 messages suppressed
> May 26 18:02:26 tarm kernel: [ 3607.627787] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:02:28 tarm kernel: [ 3609.767385] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
> May 26 18:02:28 tarm kernel: [ 3609.767625] acpi-cpufreq: acpi_cpufreq_verify
> May 26 18:02:28 tarm kernel: [ 3609.767757] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 18:02:28 tarm kernel: [ 3609.767895] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 18:02:28 tarm kernel: [ 3609.768031] acpi-cpufreq: acpi_cpufreq_verify
> May 26 18:02:28 tarm kernel: [ 3609.768158] freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
> May 26 18:02:28 tarm kernel: [ 3609.768294] freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
> May 26 18:02:28 tarm kernel: [ 3609.768429] cpufreq-core: new min and max freqs are 800000 - 800000 kHz
> May 26 18:02:28 tarm kernel: [ 3609.768561] cpufreq-core: governor: change or update limits
> May 26 18:02:28 tarm kernel: [ 3609.768689] cpufreq-core: __cpufreq_governor for CPU 0, event 3
> May 26 18:04:20 tarm kernel: [ 3721.943273] __ratelimit: 18 messages suppressed
> May 26 18:04:20 tarm kernel: [ 3721.943484] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
> May 26 18:04:20 tarm kernel: [ 3721.943624] cpufreq-core: updating policy for CPU 0
> May 26 18:04:20 tarm kernel: [ 3721.943754] acpi-cpufreq: get_cur_freq_on_cpu (0)
> May 26 18:04:20 tarm kernel: [ 3721.943883] acpi-cpufreq: get_cur_val = 100664850
> May 26 18:04:20 tarm kernel: [ 3721.944010] acpi-cpufreq: cur freq = 800000
> May 26 18:04:20 tarm kernel: [ 3721.944137] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
> May 26 18:04:20 tarm kernel: [ 3721.944271] acpi-cpufreq: acpi_cpufreq_verify
> May 26 18:04:20 tarm kernel: [ 3721.944418] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 18:04:20 tarm kernel: [ 3721.944556] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 18:04:20 tarm kernel: [ 3721.944691] acpi-cpufreq: acpi_cpufreq_verify
> May 26 18:04:20 tarm kernel: [ 3721.944818] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 18:04:20 tarm kernel: [ 3721.945412] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 18:04:20 tarm kernel: [ 3721.945579] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
> May 26 18:04:20 tarm kernel: [ 3721.945714] cpufreq-core: governor: change or update limits
> May 26 18:04:20 tarm kernel: [ 3721.945845] cpufreq-core: __cpufreq_governor for CPU 0, event 3
> May 26 18:04:29 tarm kernel: [ 3730.625003] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:04:29 tarm kernel: [ 3730.625247] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 18:04:29 tarm kernel: [ 3730.625405] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 18:04:29 tarm kernel: [ 3730.625545] freq-table: target is 0 (2000000 kHz, 0)
> May 26 18:04:29 tarm kernel: [ 3730.625674] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 18:04:29 tarm kernel: [ 3730.625808] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 18:04:30 tarm kernel: [ 3732.125001] __ratelimit: 8 messages suppressed
> May 26 18:04:30 tarm kernel: [ 3732.125223] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:05:01 tarm kernel: [ 3762.625004] __ratelimit: 27 messages suppressed
> May 26 18:05:01 tarm kernel: [ 3762.625230] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:05:01 tarm kernel: [ 3762.625371] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 18:05:01 tarm kernel: [ 3762.625503] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 18:05:01 tarm kernel: [ 3762.625639] freq-table: target is 0 (2000000 kHz, 0)
> May 26 18:05:01 tarm kernel: [ 3762.625767] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 18:05:01 tarm kernel: [ 3762.625996] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 18:05:05 tarm kernel: [ 3767.125001] __ratelimit: 34 messages suppressed
> May 26 18:05:05 tarm kernel: [ 3767.125153] cpufreq-core: target for CPU 0: 457142 kHz, relation 0
> May 26 18:05:11 tarm kernel: [ 3772.625012] __ratelimit: 53 messages suppressed
> May 26 18:05:11 tarm kernel: [ 3772.625165] cpufreq-core: target for CPU 0: 685714 kHz, relation 0
> May 26 18:05:14 tarm kernel: [ 3775.942575] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
> May 26 18:05:14 tarm kernel: [ 3775.942722] acpi-cpufreq: acpi_cpufreq_verify
> May 26 18:05:14 tarm kernel: [ 3775.942782] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 18:05:14 tarm kernel: [ 3775.942844] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 18:05:14 tarm kernel: [ 3775.942905] acpi-cpufreq: acpi_cpufreq_verify
> May 26 18:05:14 tarm kernel: [ 3775.942961] freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
> May 26 18:05:14 tarm kernel: [ 3775.943022] freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
> May 26 18:05:14 tarm kernel: [ 3775.943082] cpufreq-core: new min and max freqs are 800000 - 800000 kHz
> May 26 18:05:14 tarm kernel: [ 3775.943140] cpufreq-core: governor: change or update limits
> May 26 18:05:14 tarm kernel: [ 3775.943197] cpufreq-core: __cpufreq_governor for CPU 0, event 3
> May 26 18:05:14 tarm kernel: [ 3775.943255] cpufreq-core: target for CPU 0: 800000 kHz, relation 1
> May 26 18:05:14 tarm kernel: [ 3775.943311] acpi-cpufreq: acpi_cpufreq_target 800000 (0)
> May 26 18:05:14 tarm kernel: [ 3775.943369] freq-table: request for target 800000 kHz (relation: 1) for cpu 0
> May 26 18:05:14 tarm kernel: [ 3775.943428] freq-table: target is 4 (800000 kHz, 4)
> May 26 18:05:14 tarm kernel: [ 3775.943485] cpufreq-core: notification 0 of frequency transition to 800000 kHz
> May 26 18:05:14 tarm kernel: [ 3775.943546] cpufreq-core: notification 1 of frequency transition to 800000 kHz
> May 26 18:05:14 tarm kernel: [ 3775.943599] cpufreq-core: scaling loops_per_jiffy to 3195449 for frequency 800000 kHz
> May 26 18:07:00 tarm kernel: [ 3881.874163] __ratelimit: 44 messages suppressed
> May 26 18:07:00 tarm kernel: [ 3881.874373] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
> May 26 18:07:00 tarm kernel: [ 3881.874512] cpufreq-core: updating policy for CPU 0
> May 26 18:07:00 tarm kernel: [ 3881.874642] acpi-cpufreq: get_cur_freq_on_cpu (0)
> May 26 18:07:00 tarm kernel: [ 3881.874770] acpi-cpufreq: get_cur_val = 100664850
> May 26 18:07:00 tarm kernel: [ 3881.874896] acpi-cpufreq: cur freq = 800000
> May 26 18:07:00 tarm kernel: [ 3881.875047] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
> May 26 18:07:00 tarm kernel: [ 3881.875182] acpi-cpufreq: acpi_cpufreq_verify
> May 26 18:07:00 tarm kernel: [ 3881.875310] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 18:07:00 tarm kernel: [ 3881.875447] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 18:07:00 tarm kernel: [ 3881.875583] acpi-cpufreq: acpi_cpufreq_verify
> May 26 18:07:00 tarm kernel: [ 3881.875710] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 18:07:00 tarm kernel: [ 3881.875847] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 18:07:00 tarm kernel: [ 3881.875982] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
> May 26 18:07:00 tarm kernel: [ 3881.876115] cpufreq-core: governor: change or update limits
> May 26 18:07:00 tarm kernel: [ 3881.876243] cpufreq-core: __cpufreq_governor for CPU 0, event 3
> May 26 18:07:01 tarm kernel: [ 3882.625011] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:07:01 tarm kernel: [ 3882.625258] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 18:07:01 tarm kernel: [ 3882.625399] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 18:07:01 tarm kernel: [ 3882.625541] freq-table: target is 0 (2000000 kHz, 0)
> May 26 18:07:01 tarm kernel: [ 3882.625675] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 18:07:18 tarm kernel: [ 3899.625001] __ratelimit: 16 messages suppressed
> May 26 18:07:18 tarm kernel: [ 3899.625229] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:07:18 tarm kernel: [ 3899.625400] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 18:07:18 tarm kernel: [ 3899.625536] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 18:09:01 tarm kernel: [ 4003.125000] __ratelimit: 11 messages suppressed
> May 26 18:09:01 tarm kernel: [ 4003.125219] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:09:01 tarm kernel: [ 4003.125383] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 18:09:01 tarm kernel: [ 4003.125518] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 18:09:01 tarm kernel: [ 4003.125655] freq-table: target is 0 (2000000 kHz, 0)
> May 26 18:09:01 tarm kernel: [ 4003.125785] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 18:09:01 tarm kernel: [ 4003.125920] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 18:09:01 tarm kernel: [ 4003.125974] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 18:09:02 tarm kernel: [ 4003.624990] cpufreq-core: target for CPU 0: 457142 kHz, relation 0
> May 26 18:09:02 tarm kernel: [ 4003.625144] acpi-cpufreq: acpi_cpufreq_target 457142 (0)
> May 26 18:09:02 tarm kernel: [ 4003.625219] freq-table: request for target 457142 kHz (relation: 0) for cpu 0
> May 26 18:09:13 tarm kernel: [ 4014.625002] __ratelimit: 4 messages suppressed
> May 26 18:09:13 tarm kernel: [ 4014.625228] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:09:13 tarm kernel: [ 4014.625394] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 18:09:47 tarm kernel: [ 4048.625002] __ratelimit: 19 messages suppressed
> May 26 18:09:47 tarm kernel: [ 4048.625223] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:09:47 tarm kernel: [ 4048.625389] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 18:09:47 tarm kernel: [ 4048.625524] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 18:09:47 tarm kernel: [ 4048.625661] freq-table: target is 0 (2000000 kHz, 0)
> May 26 18:09:47 tarm kernel: [ 4048.625791] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 18:09:47 tarm kernel: [ 4048.625926] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 18:09:47 tarm kernel: [ 4048.625990] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 18:09:52 tarm kernel: [ 4053.626605] __ratelimit: 33 messages suppressed
> May 26 18:09:52 tarm kernel: [ 4053.626791] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:09:58 tarm kernel: [ 4060.133318] __ratelimit: 20 messages suppressed
> May 26 18:09:58 tarm kernel: [ 4060.133559] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:10:01 tarm kernel: [ 4063.125021] __ratelimit: 13 messages suppressed
> May 26 18:10:01 tarm kernel: [ 4063.125262] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:10:06 tarm kernel: [ 4068.125460] __ratelimit: 13 messages suppressed
> May 26 18:10:06 tarm kernel: [ 4068.125699] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:10:12 tarm kernel: [ 4074.125037] __ratelimit: 20 messages suppressed
> May 26 18:10:12 tarm kernel: [ 4074.125255] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:10:18 tarm kernel: [ 4079.626878] __ratelimit: 13 messages suppressed
> May 26 18:10:18 tarm kernel: [ 4079.627098] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:10:24 tarm kernel: [ 4086.133059] __ratelimit: 20 messages suppressed
> May 26 18:10:24 tarm kernel: [ 4086.133274] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:10:27 tarm kernel: [ 4088.624999] __ratelimit: 11 messages suppressed
> May 26 18:10:27 tarm kernel: [ 4088.625151] cpufreq-core: target for CPU 0: 1142857 kHz, relation 0
> May 26 18:10:32 tarm kernel: [ 4093.625002] __ratelimit: 27 messages suppressed
> May 26 18:10:32 tarm kernel: [ 4093.625227] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:10:34 tarm kernel: [ 4095.755272] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
> May 26 18:10:34 tarm kernel: [ 4095.755508] acpi-cpufreq: acpi_cpufreq_verify
> May 26 18:10:34 tarm kernel: [ 4095.755642] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 18:10:34 tarm kernel: [ 4095.755780] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 18:10:34 tarm kernel: [ 4095.755916] acpi-cpufreq: acpi_cpufreq_verify
> May 26 18:10:34 tarm kernel: [ 4095.756042] freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
> May 26 18:10:34 tarm kernel: [ 4095.756179] freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
> May 26 18:10:34 tarm kernel: [ 4095.756314] cpufreq-core: new min and max freqs are 800000 - 800000 kHz
> May 26 18:10:34 tarm kernel: [ 4095.756447] cpufreq-core: governor: change or update limits
> May 26 18:10:34 tarm kernel: [ 4095.756575] cpufreq-core: __cpufreq_governor for CPU 0, event 3
> May 26 18:12:34 tarm kernel: [ 4216.175207] __ratelimit: 39 messages suppressed
> May 26 18:12:34 tarm kernel: [ 4216.175414] cpufreq-core: CPU 0: _PPC is 0 - frequency not limited
> May 26 18:12:34 tarm kernel: [ 4216.175553] cpufreq-core: updating policy for CPU 0
> May 26 18:12:34 tarm kernel: [ 4216.175682] acpi-cpufreq: get_cur_freq_on_cpu (0)
> May 26 18:12:34 tarm kernel: [ 4216.175809] acpi-cpufreq: get_cur_val = 100664850
> May 26 18:12:34 tarm kernel: [ 4216.175936] acpi-cpufreq: cur freq = 800000
> May 26 18:12:34 tarm kernel: [ 4216.176061] cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz
> May 26 18:12:34 tarm kernel: [ 4216.176194] acpi-cpufreq: acpi_cpufreq_verify
> May 26 18:12:34 tarm kernel: [ 4216.176322] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 18:12:34 tarm kernel: [ 4216.176458] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 18:12:34 tarm kernel: [ 4216.176592] acpi-cpufreq: acpi_cpufreq_verify
> May 26 18:12:34 tarm kernel: [ 4216.176719] freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0
> May 26 18:12:34 tarm kernel: [ 4216.176856] freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0
> May 26 18:12:34 tarm kernel: [ 4216.177405] cpufreq-core: new min and max freqs are 800000 - 2000000 kHz
> May 26 18:12:34 tarm kernel: [ 4216.177565] cpufreq-core: governor: change or update limits
> May 26 18:12:34 tarm kernel: [ 4216.177696] cpufreq-core: __cpufreq_governor for CPU 0, event 3
> May 26 18:12:49 tarm kernel: [ 4230.625012] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:12:49 tarm kernel: [ 4230.625277] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 18:12:49 tarm kernel: [ 4230.625421] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 18:12:49 tarm kernel: [ 4230.625563] freq-table: target is 0 (2000000 kHz, 0)
> May 26 18:12:49 tarm kernel: [ 4230.625698] cpufreq-core: notification 0 of frequency transition to 2000000 kHz
> May 26 18:12:49 tarm kernel: [ 4230.625838] cpufreq-core: scaling loops_per_jiffy to 7988623 for frequency 2000000 kHz
> May 26 18:12:49 tarm kernel: [ 4230.625904] cpufreq-core: notification 1 of frequency transition to 2000000 kHz
> May 26 18:13:00 tarm kernel: [ 4241.624998] __ratelimit: 7 messages suppressed
> May 26 18:13:00 tarm kernel: [ 4241.625219] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:13:00 tarm kernel: [ 4241.625384] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> May 26 18:13:00 tarm kernel: [ 4241.625519] freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
> May 26 18:13:14 tarm kernel: [ 4255.624998] __ratelimit: 37 messages suppressed
> May 26 18:13:14 tarm kernel: [ 4255.625224] cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
> May 26 18:13:14 tarm kernel: [ 4255.625391] acpi-cpufreq: acpi_cpufreq_target 2000000 (0)
> 

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2008-07-18  3:20 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <200805231944.57320.arekm@maven.pl>
     [not found] ` <200805251136.24313.arekm@maven.pl>
     [not found]   ` <1211727835.3422.36.camel@linux-2bdv.site>
     [not found]     ` <200805260907.05561.arekm@maven.pl>
2008-05-26 11:37       ` cpufreq limits avilable frequencies to 800MHz on git kernel Thomas Renninger
2008-05-26 16:15         ` Arkadiusz Miskiewicz
2008-05-26 16:23           ` Arkadiusz Miskiewicz
2008-07-17 13:48             ` [PATCH] " Thomas Renninger
2008-07-17 21:40               ` Andrew Morton
2008-07-18  2:46                 ` Thomas Renninger
2008-05-27  9:35           ` Thomas Renninger

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox