[PATCH 0/3] WMI patches for 2.6.28 (Resend)

[PATCH 0/3] WMI patches for 2.6.28 (Resend)

[Carlos Corbacho]

Len,

The following are three WMI patches for 2.6.28 (resending them again, this
is the same series I sent out a month ago).

The first two add rfkill support to acer-wmi for wireless & bluetooth, and
remove the old sysfs interfaces for these.

The third patch, from Matthew Garrett, adds event enabling/ disabling for
certain events to WMI, and is required for another WMI driver he's working
on.

-Carlos
---

Carlos Corbacho (2):
      acer-wmi: Remove wireless and bluetooth sysfs entries
      acer-wmi: Add rfkill support for wireless and bluetooth

Matthew Garrett (1):
      ACPI: WMI: Enable event methods when registering notifiers


 Documentation/laptops/acer-wmi.txt |   28 +---
 drivers/acpi/wmi.c                 |   39 ++++++
 drivers/misc/Kconfig               |    1 
 drivers/misc/acer-wmi.c            |  229 +++++++++++++++++++++++-------------
 4 files changed, 191 insertions(+), 106 deletions(-)

-- 
E-Mail: carlos@strangeworlds.co.uk
Web: strangeworlds.co.uk
GPG Key ID: 0x23EE722D

[PATCH 1/3] acer-wmi: Add rfkill support for wireless and bluetooth

[Carlos Corbacho]

This patch implements rfkill support for the wireless and bluetooth devices
commonly found on Acer laptops.

For now, we will always poll these devices once a second to guarantee we
can catch state changes. On newer Acer laptops, it may be possible to rely
on WMI events to do this instead, and experimental support for this will be
added in a later patch.

3G has been deliberately left off for now, as we still have no way to
detect it, (nor, AFAIK, has any Linux user tried the code) and on laptops
that don't support 3G, trying to poll for the status will leave the logs
full of ACPI tracebacks.

The old sysfs interface for wireless and bluetooth will be removed in a
later patch.

(Thanks to Henrique de Moraes Holschuh and Dmitry Torokhov for reviewing
this patch).

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
---

 drivers/misc/Kconfig    |    1 
 drivers/misc/acer-wmi.c |  130 +++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 130 insertions(+), 1 deletions(-)

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index a726f3b..6abb959 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -145,6 +145,7 @@ config ACER_WMI
 	depends on NEW_LEDS
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on SERIO_I8042
+	depends on RFKILL
 	select ACPI_WMI
 	---help---
 	  This is a driver for newer Acer (and Wistron) laptops. It adds
diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c
index d8b0d32..e3e11e8 100644
--- a/drivers/misc/acer-wmi.c
+++ b/drivers/misc/acer-wmi.c
@@ -33,6 +33,8 @@
 #include <linux/platform_device.h>
 #include <linux/acpi.h>
 #include <linux/i8042.h>
+#include <linux/rfkill.h>
+#include <linux/workqueue.h>
 #include <linux/debugfs.h>
 
 #include <acpi/acpi_drivers.h>
@@ -157,6 +159,9 @@ struct acer_debug {
 	u32 wmid_devices;
 };
 
+static struct rfkill *wireless_rfkill;
+static struct rfkill *bluetooth_rfkill;
+
 /* Each low-level interface must define at least some of the following */
 struct wmi_interface {
 	/* The WMI device type */
@@ -933,6 +938,125 @@ static void acer_backlight_exit(void)
 }
 
 /*
+ * Rfkill devices
+ */
+static struct workqueue_struct *rfkill_workqueue;
+
+static void acer_rfkill_update(struct work_struct *ignored);
+static DECLARE_DELAYED_WORK(acer_rfkill_work, acer_rfkill_update);
+static void acer_rfkill_update(struct work_struct *ignored)
+{
+	u32 state;
+	acpi_status status;
+
+	status = get_u32(&state, ACER_CAP_WIRELESS);
+	if (ACPI_SUCCESS(status))
+		rfkill_force_state(wireless_rfkill, state ?
+			RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED);
+
+	if (has_cap(ACER_CAP_BLUETOOTH)) {
+		status = get_u32(&state, ACER_CAP_BLUETOOTH);
+		if (ACPI_SUCCESS(status))
+			rfkill_force_state(bluetooth_rfkill, state ?
+				RFKILL_STATE_UNBLOCKED :
+				RFKILL_STATE_SOFT_BLOCKED);
+	}
+
+	queue_delayed_work(rfkill_workqueue, &acer_rfkill_work,
+		round_jiffies_relative(HZ));
+}
+
+static int acer_rfkill_set(void *data, enum rfkill_state state)
+{
+	acpi_status status;
+	u32 *cap = data;
+	status = set_u32((u32) (state == RFKILL_STATE_UNBLOCKED), *cap);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+	return 0;
+}
+
+static struct rfkill * acer_rfkill_register(struct device *dev,
+enum rfkill_type type, char *name, u32 cap)
+{
+	int err;
+	u32 state;
+	u32 *data;
+	struct rfkill *rfkill_dev;
+
+	rfkill_dev = rfkill_allocate(dev, type);
+	if (!rfkill_dev)
+		return ERR_PTR(-ENOMEM);
+	rfkill_dev->name = name;
+	get_u32(&state, cap);
+	rfkill_dev->state = state ? RFKILL_STATE_UNBLOCKED :
+		RFKILL_STATE_SOFT_BLOCKED;
+	data = kzalloc(sizeof(u32), GFP_KERNEL);
+	if (!data) {
+		rfkill_free(rfkill_dev);
+		return ERR_PTR(-ENOMEM);
+	}
+	*data = cap;
+	rfkill_dev->data = data;
+	rfkill_dev->toggle_radio = acer_rfkill_set;
+	rfkill_dev->user_claim_unsupported = 1;
+
+	err = rfkill_register(rfkill_dev);
+	if (err) {
+		kfree(rfkill_dev->data);
+		rfkill_free(rfkill_dev);
+		return ERR_PTR(err);
+	}
+	return rfkill_dev;
+}
+
+static int acer_rfkill_init(struct device *dev)
+{
+	wireless_rfkill = acer_rfkill_register(dev, RFKILL_TYPE_WLAN,
+		"acer-wireless", ACER_CAP_WIRELESS);
+	if (IS_ERR(wireless_rfkill))
+		return PTR_ERR(wireless_rfkill);
+
+	if (has_cap(ACER_CAP_BLUETOOTH)) {
+		bluetooth_rfkill = acer_rfkill_register(dev,
+			RFKILL_TYPE_BLUETOOTH, "acer-bluetooth",
+			ACER_CAP_BLUETOOTH);
+		if (IS_ERR(bluetooth_rfkill)) {
+			kfree(wireless_rfkill->data);
+			rfkill_unregister(wireless_rfkill);
+			return PTR_ERR(bluetooth_rfkill);
+		}
+	}
+
+	rfkill_workqueue = create_singlethread_workqueue("rfkill_workqueue");
+	if (!rfkill_workqueue) {
+		if (has_cap(ACER_CAP_BLUETOOTH)) {
+			kfree(bluetooth_rfkill->data);
+			rfkill_unregister(bluetooth_rfkill);
+		}
+		kfree(wireless_rfkill->data);
+		rfkill_unregister(wireless_rfkill);
+		return -ENOMEM;
+	}
+	queue_delayed_work(rfkill_workqueue, &acer_rfkill_work, HZ);
+
+	return 0;
+}
+
+static void acer_rfkill_exit(void)
+{
+	cancel_delayed_work_sync(&acer_rfkill_work);
+	destroy_workqueue(rfkill_workqueue);
+	kfree(wireless_rfkill->data);
+	rfkill_unregister(wireless_rfkill);
+	if (has_cap(ACER_CAP_BLUETOOTH)) {
+		kfree(wireless_rfkill->data);
+		rfkill_unregister(bluetooth_rfkill);
+	}
+	return;
+}
+
+/*
  * Read/ write bool sysfs macro
  */
 #define show_set_bool(value, cap) \
@@ -1026,7 +1150,9 @@ static int __devinit acer_platform_probe(struct platform_device *device)
 			goto error_brightness;
 	}
 
-	return 0;
+	err = acer_rfkill_init(&device->dev);
+
+	return err;
 
 error_brightness:
 	acer_led_exit();
@@ -1040,6 +1166,8 @@ static int acer_platform_remove(struct platform_device *device)
 		acer_led_exit();
 	if (has_cap(ACER_CAP_BRIGHTNESS))
 		acer_backlight_exit();
+
+	acer_rfkill_exit();
 	return 0;
 }
 

Re: [PATCH 1/3] acer-wmi: Add rfkill support for wireless and bluetooth

[Dmitry Torokhov]

Hi Carlos,

On Wed, Oct 08, 2008 at 09:40:21PM +0100, Carlos Corbacho wrote:
> +
> +	rfkill_workqueue = create_singlethread_workqueue("rfkill_workqueue");
> +	if (!rfkill_workqueue) {
> +		if (has_cap(ACER_CAP_BLUETOOTH)) {
> +			kfree(bluetooth_rfkill->data);
> +			rfkill_unregister(bluetooth_rfkill);
> +		}
> +		kfree(wireless_rfkill->data);
> +		rfkill_unregister(wireless_rfkill);
> +		return -ENOMEM;
> +	}
> +	queue_delayed_work(rfkill_workqueue, &acer_rfkill_work, HZ);
> +

Do we really need a private workqueue here? acer_rfkill_work seems to
be a 'quickie' and so keventd should work pretty well here, shouldn't
it?

Thanks!

-- 
Dmitry

[PATCH 2/3] acer-wmi: Remove wireless and bluetooth sysfs entries

[Carlos Corbacho]

These are now replaced by the rfkill interface.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
---

 Documentation/laptops/acer-wmi.txt |   28 +---------
 drivers/misc/acer-wmi.c            |  101 +++++++-----------------------------
 2 files changed, 25 insertions(+), 104 deletions(-)

diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt
index 69b5dd4..2b3a6b5 100644
--- a/Documentation/laptops/acer-wmi.txt
+++ b/Documentation/laptops/acer-wmi.txt
@@ -1,7 +1,7 @@
 Acer Laptop WMI Extras Driver
 http://code.google.com/p/aceracpi
-Version 0.1
-9th February 2008
+Version 0.2
+18th August 2008
 
 Copyright 2007-2008 Carlos Corbacho <carlos@strangeworlds.co.uk>
 
@@ -87,17 +87,7 @@ acer-wmi come with built-in wireless. However, should you feel so inclined to
 ever wish to remove the card, or swap it out at some point, please get in touch
 with me, as we may well be able to gain some data on wireless card detection.
 
-To read the status of the wireless radio (0=off, 1=on):
-cat /sys/devices/platform/acer-wmi/wireless
-
-To enable the wireless radio:
-echo 1 > /sys/devices/platform/acer-wmi/wireless
-
-To disable the wireless radio:
-echo 0 > /sys/devices/platform/acer-wmi/wireless
-
-To set the state of the wireless radio when loading acer-wmi, pass:
-wireless=X (where X is 0 or 1)
+The wireless radio is exposed through rfkill.
 
 Bluetooth
 *********
@@ -117,17 +107,7 @@ For the adventurously minded - if you want to buy an internal bluetooth
 module off the internet that is compatible with your laptop and fit it, then
 it will work just fine with acer-wmi.
 
-To read the status of the bluetooth module (0=off, 1=on):
-cat /sys/devices/platform/acer-wmi/wireless
-
-To enable the bluetooth module:
-echo 1 > /sys/devices/platform/acer-wmi/bluetooth
-
-To disable the bluetooth module:
-echo 0 > /sys/devices/platform/acer-wmi/bluetooth
-
-To set the state of the bluetooth module when loading acer-wmi, pass:
-bluetooth=X (where X is 0 or 1)
+Bluetooth is exposed through rfkill.
 
 3G
 **
diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c
index e3e11e8..8708d31 100644
--- a/drivers/misc/acer-wmi.c
+++ b/drivers/misc/acer-wmi.c
@@ -125,21 +125,15 @@ enum interface_flags {
 
 static int max_brightness = 0xF;
 
-static int wireless = -1;
-static int bluetooth = -1;
 static int mailled = -1;
 static int brightness = -1;
 static int threeg = -1;
 static int force_series;
 
 module_param(mailled, int, 0444);
-module_param(wireless, int, 0444);
-module_param(bluetooth, int, 0444);
 module_param(brightness, int, 0444);
 module_param(threeg, int, 0444);
 module_param(force_series, int, 0444);
-MODULE_PARM_DESC(wireless, "Set initial state of Wireless hardware");
-MODULE_PARM_DESC(bluetooth, "Set initial state of Bluetooth hardware");
 MODULE_PARM_DESC(mailled, "Set initial state of Mail LED");
 MODULE_PARM_DESC(brightness, "Set initial LCD backlight brightness");
 MODULE_PARM_DESC(threeg, "Set initial state of 3G hardware");
@@ -147,8 +141,6 @@ MODULE_PARM_DESC(force_series, "Force a different laptop series");
 
 struct acer_data {
 	int mailled;
-	int wireless;
-	int bluetooth;
 	int threeg;
 	int brightness;
 };
@@ -851,8 +843,6 @@ static void __init acer_commandline_init(void)
 	 * capability isn't available on the given interface
 	 */
 	set_u32(mailled, ACER_CAP_MAILLED);
-	set_u32(wireless, ACER_CAP_WIRELESS);
-	set_u32(bluetooth, ACER_CAP_BLUETOOTH);
 	set_u32(threeg, ACER_CAP_THREEG);
 	set_u32(brightness, ACER_CAP_BRIGHTNESS);
 }
@@ -1057,40 +1047,30 @@ static void acer_rfkill_exit(void)
 }
 
 /*
- * Read/ write bool sysfs macro
+ * sysfs interface
  */
-#define show_set_bool(value, cap) \
-static ssize_t \
-show_bool_##value(struct device *dev, struct device_attribute *attr, \
-	char *buf) \
-{ \
+static ssize_t show_bool_threeg(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
 	u32 result; \
-	acpi_status status = get_u32(&result, cap); \
-	if (ACPI_SUCCESS(status)) \
-		return sprintf(buf, "%u\n", result); \
-	return sprintf(buf, "Read error\n"); \
-} \
-\
-static ssize_t \
-set_bool_##value(struct device *dev, struct device_attribute *attr, \
-	const char *buf, size_t count) \
-{ \
-	u32 tmp = simple_strtoul(buf, NULL, 10); \
-	acpi_status status = set_u32(tmp, cap); \
-		if (ACPI_FAILURE(status)) \
-			return -EINVAL; \
-	return count; \
-} \
-static DEVICE_ATTR(value, S_IWUGO | S_IRUGO | S_IWUSR, \
-	show_bool_##value, set_bool_##value);
-
-show_set_bool(wireless, ACER_CAP_WIRELESS);
-show_set_bool(bluetooth, ACER_CAP_BLUETOOTH);
-show_set_bool(threeg, ACER_CAP_THREEG);
+	acpi_status status = get_u32(&result, ACER_CAP_THREEG);
+	if (ACPI_SUCCESS(status))
+		return sprintf(buf, "%u\n", result);
+	return sprintf(buf, "Read error\n");
+}
+
+static ssize_t set_bool_threeg(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	u32 tmp = simple_strtoul(buf, NULL, 10);
+	acpi_status status = set_u32(tmp, ACER_CAP_THREEG);
+		if (ACPI_FAILURE(status))
+			return -EINVAL;
+	return count;
+}
+static DEVICE_ATTR(threeg, S_IWUGO | S_IRUGO | S_IWUSR, show_bool_threeg,
+	set_bool_threeg);
 
-/*
- * Read interface sysfs macro
- */
 static ssize_t show_interface(struct device *dev, struct device_attribute *attr,
 	char *buf)
 {
@@ -1180,16 +1160,6 @@ pm_message_t state)
 	if (!data)
 		return -ENOMEM;
 
-	if (has_cap(ACER_CAP_WIRELESS)) {
-		get_u32(&value, ACER_CAP_WIRELESS);
-		data->wireless = value;
-	}
-
-	if (has_cap(ACER_CAP_BLUETOOTH)) {
-		get_u32(&value, ACER_CAP_BLUETOOTH);
-		data->bluetooth = value;
-	}
-
 	if (has_cap(ACER_CAP_MAILLED)) {
 		get_u32(&value, ACER_CAP_MAILLED);
 		data->mailled = value;
@@ -1210,15 +1180,6 @@ static int acer_platform_resume(struct platform_device *device)
 	if (!data)
 		return -ENOMEM;
 
-	if (has_cap(ACER_CAP_WIRELESS))
-		set_u32(data->wireless, ACER_CAP_WIRELESS);
-
-	if (has_cap(ACER_CAP_BLUETOOTH))
-		set_u32(data->bluetooth, ACER_CAP_BLUETOOTH);
-
-	if (has_cap(ACER_CAP_THREEG))
-		set_u32(data->threeg, ACER_CAP_THREEG);
-
 	if (has_cap(ACER_CAP_MAILLED))
 		set_u32(data->mailled, ACER_CAP_MAILLED);
 
@@ -1243,12 +1204,6 @@ static struct platform_device *acer_platform_device;
 
 static int remove_sysfs(struct platform_device *device)
 {
-	if (has_cap(ACER_CAP_WIRELESS))
-		device_remove_file(&device->dev, &dev_attr_wireless);
-
-	if (has_cap(ACER_CAP_BLUETOOTH))
-		device_remove_file(&device->dev, &dev_attr_bluetooth);
-
 	if (has_cap(ACER_CAP_THREEG))
 		device_remove_file(&device->dev, &dev_attr_threeg);
 
@@ -1261,20 +1216,6 @@ static int create_sysfs(void)
 {
 	int retval = -ENOMEM;
 
-	if (has_cap(ACER_CAP_WIRELESS)) {
-		retval = device_create_file(&acer_platform_device->dev,
-			&dev_attr_wireless);
-		if (retval)
-			goto error_sysfs;
-	}
-
-	if (has_cap(ACER_CAP_BLUETOOTH)) {
-		retval = device_create_file(&acer_platform_device->dev,
-			&dev_attr_bluetooth);
-		if (retval)
-			goto error_sysfs;
-	}
-
 	if (has_cap(ACER_CAP_THREEG)) {
 		retval = device_create_file(&acer_platform_device->dev,
 			&dev_attr_threeg);

[PATCH 3/3] ACPI: WMI: Enable event methods when registering notifiers

[Carlos Corbacho]

From: Matthew Garrett <mjg@redhat.com>

According to the ACPI-WMI spec, event blocks may provide a function call
for enabling/disabling them. This patch adds support for making these
calls when registering or removing notifications. Without this, my Dell
firmware provides no data in the event notification.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
---

 drivers/acpi/wmi.c |   39 +++++++++++++++++++++++++++++++++++++--
 1 files changed, 37 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/wmi.c b/drivers/acpi/wmi.c
index cfe2c83..5464cfc 100644
--- a/drivers/acpi/wmi.c
+++ b/drivers/acpi/wmi.c
@@ -217,6 +217,35 @@ static bool find_guid(const char *guid_string, struct wmi_block **out)
 	return 0;
 }
 
+static acpi_status wmi_method_enable(struct wmi_block *wblock, int enable)
+{
+	struct guid_block *block = NULL;
+	char method[5];
+	struct acpi_object_list input;
+	union acpi_object params[1];
+	acpi_status status;
+	acpi_handle handle;
+
+	block = &wblock->gblock;
+	handle = wblock->handle;
+
+	if (!block)
+		return AE_NOT_EXIST;
+
+	input.count = 1;
+	input.pointer = params;
+	params[0].type = ACPI_TYPE_INTEGER;
+	params[0].integer.value = enable;
+
+	snprintf(method, 5, "WE%02X", block->notify_id);
+	status = acpi_evaluate_object(handle, method, &input, NULL);
+
+	if (status != AE_OK && status != AE_NOT_FOUND)
+		return status;
+	else
+		return AE_OK;
+}
+
 /*
  * Exported WMI functions
  */
@@ -427,6 +456,7 @@ acpi_status wmi_install_notify_handler(const char *guid,
 wmi_notify_handler handler, void *data)
 {
 	struct wmi_block *block;
+	acpi_status status;
 
 	if (!guid || !handler)
 		return AE_BAD_PARAMETER;
@@ -441,7 +471,9 @@ wmi_notify_handler handler, void *data)
 	block->handler = handler;
 	block->handler_data = data;
 
-	return AE_OK;
+	status = wmi_method_enable(block, 1);
+
+	return status;
 }
 EXPORT_SYMBOL_GPL(wmi_install_notify_handler);
 
@@ -453,6 +485,7 @@ EXPORT_SYMBOL_GPL(wmi_install_notify_handler);
 acpi_status wmi_remove_notify_handler(const char *guid)
 {
 	struct wmi_block *block;
+	acpi_status status;
 
 	if (!guid)
 		return AE_BAD_PARAMETER;
@@ -464,10 +497,12 @@ acpi_status wmi_remove_notify_handler(const char *guid)
 	if (!block->handler)
 		return AE_NULL_ENTRY;
 
+	status = wmi_method_enable(block, 0);
+
 	block->handler = NULL;
 	block->handler_data = NULL;
 
-	return AE_OK;
+	return status;
 }
 EXPORT_SYMBOL_GPL(wmi_remove_notify_handler);
 

Re: [PATCH 0/3] WMI patches for 2.6.28 (Resend)

[Len Brown]

series applied to acpi-test.

thanks,
-len

On Wed, 8 Oct 2008, Carlos Corbacho wrote:

> Len,
> 
> The following are three WMI patches for 2.6.28 (resending them again, this
> is the same series I sent out a month ago).
> 
> The first two add rfkill support to acer-wmi for wireless & bluetooth, and
> remove the old sysfs interfaces for these.
> 
> The third patch, from Matthew Garrett, adds event enabling/ disabling for
> certain events to WMI, and is required for another WMI driver he's working
> on.
> 
> -Carlos
> ---
> 
> Carlos Corbacho (2):
>       acer-wmi: Remove wireless and bluetooth sysfs entries
>       acer-wmi: Add rfkill support for wireless and bluetooth
> 
> Matthew Garrett (1):
>       ACPI: WMI: Enable event methods when registering notifiers
> 
> 
>  Documentation/laptops/acer-wmi.txt |   28 +---
>  drivers/acpi/wmi.c                 |   39 ++++++
>  drivers/misc/Kconfig               |    1 
>  drivers/misc/acer-wmi.c            |  229 +++++++++++++++++++++++-------------
>  4 files changed, 191 insertions(+), 106 deletions(-)
> 
> -- 
> E-Mail: carlos@strangeworlds.co.uk
> Web: strangeworlds.co.uk
> GPG Key ID: 0x23EE722D
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

[PATCH 0/3] WMI patches for 2.6.28

[Carlos Corbacho]

Len,

The following are three WMI patches for 2.6.28

The first two add rfkill support to acer-wmi for wireless & bluetooth, and
remove the old sysfs interfaces for these.

The third patch, from Matthew Garrett, adds event enabling/ disabling for
certain events to WMI, and is required for another WMI driver he's working
on.

-Carlos
---

Carlos Corbacho (2):
      acer-wmi: Remove wireless and bluetooth sysfs entries
      acer-wmi: Add rfkill support for wireless and bluetooth

Matthew Garrett (1):
      According to the ACPI-WMI spec, event blocks may provide a function call


 Documentation/laptops/acer-wmi.txt |   28 +---
 drivers/acpi/wmi.c                 |   39 ++++++
 drivers/misc/Kconfig               |    1 
 drivers/misc/acer-wmi.c            |  229 +++++++++++++++++++++++-------------
 4 files changed, 191 insertions(+), 106 deletions(-)

-- 
E-Mail: carlos@strangeworlds.co.uk
Web: strangeworlds.co.uk
GPG Key ID: 0x23EE722D

[PATCH 1/3] acer-wmi: Add rfkill support for wireless and bluetooth

[Carlos Corbacho]

This patch implements rfkill support for the wireless and bluetooth devices
commonly found on Acer laptops.

For now, we will always poll these devices once a second to guarantee we
can catch state changes. On newer Acer laptops, it may be possible to rely
on WMI events to do this instead, and experimental support for this will be
added in a later patch.

3G has been deliberately left off for now, as we still have no way to
detect it, (nor, AFAIK, has any Linux user tried the code) and on laptops
that don't support 3G, trying to poll for the status will leave the logs
full of ACPI tracebacks.

The old sysfs interface for wireless and bluetooth will be removed in a
later patch.

(Thanks to Henrique de Moraes Holschuh and Dmitry Torokhov for reviewing
this patch).

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
---

 drivers/misc/Kconfig    |    1 
 drivers/misc/acer-wmi.c |  130 +++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 130 insertions(+), 1 deletions(-)

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index a726f3b..6abb959 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -145,6 +145,7 @@ config ACER_WMI
 	depends on NEW_LEDS
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on SERIO_I8042
+	depends on RFKILL
 	select ACPI_WMI
 	---help---
 	  This is a driver for newer Acer (and Wistron) laptops. It adds
diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c
index d8b0d32..e3e11e8 100644
--- a/drivers/misc/acer-wmi.c
+++ b/drivers/misc/acer-wmi.c
@@ -33,6 +33,8 @@
 #include <linux/platform_device.h>
 #include <linux/acpi.h>
 #include <linux/i8042.h>
+#include <linux/rfkill.h>
+#include <linux/workqueue.h>
 #include <linux/debugfs.h>
 
 #include <acpi/acpi_drivers.h>
@@ -157,6 +159,9 @@ struct acer_debug {
 	u32 wmid_devices;
 };
 
+static struct rfkill *wireless_rfkill;
+static struct rfkill *bluetooth_rfkill;
+
 /* Each low-level interface must define at least some of the following */
 struct wmi_interface {
 	/* The WMI device type */
@@ -933,6 +938,125 @@ static void acer_backlight_exit(void)
 }
 
 /*
+ * Rfkill devices
+ */
+static struct workqueue_struct *rfkill_workqueue;
+
+static void acer_rfkill_update(struct work_struct *ignored);
+static DECLARE_DELAYED_WORK(acer_rfkill_work, acer_rfkill_update);
+static void acer_rfkill_update(struct work_struct *ignored)
+{
+	u32 state;
+	acpi_status status;
+
+	status = get_u32(&state, ACER_CAP_WIRELESS);
+	if (ACPI_SUCCESS(status))
+		rfkill_force_state(wireless_rfkill, state ?
+			RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED);
+
+	if (has_cap(ACER_CAP_BLUETOOTH)) {
+		status = get_u32(&state, ACER_CAP_BLUETOOTH);
+		if (ACPI_SUCCESS(status))
+			rfkill_force_state(bluetooth_rfkill, state ?
+				RFKILL_STATE_UNBLOCKED :
+				RFKILL_STATE_SOFT_BLOCKED);
+	}
+
+	queue_delayed_work(rfkill_workqueue, &acer_rfkill_work,
+		round_jiffies_relative(HZ));
+}
+
+static int acer_rfkill_set(void *data, enum rfkill_state state)
+{
+	acpi_status status;
+	u32 *cap = data;
+	status = set_u32((u32) (state == RFKILL_STATE_UNBLOCKED), *cap);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+	return 0;
+}
+
+static struct rfkill * acer_rfkill_register(struct device *dev,
+enum rfkill_type type, char *name, u32 cap)
+{
+	int err;
+	u32 state;
+	u32 *data;
+	struct rfkill *rfkill_dev;
+
+	rfkill_dev = rfkill_allocate(dev, type);
+	if (!rfkill_dev)
+		return ERR_PTR(-ENOMEM);
+	rfkill_dev->name = name;
+	get_u32(&state, cap);
+	rfkill_dev->state = state ? RFKILL_STATE_UNBLOCKED :
+		RFKILL_STATE_SOFT_BLOCKED;
+	data = kzalloc(sizeof(u32), GFP_KERNEL);
+	if (!data) {
+		rfkill_free(rfkill_dev);
+		return ERR_PTR(-ENOMEM);
+	}
+	*data = cap;
+	rfkill_dev->data = data;
+	rfkill_dev->toggle_radio = acer_rfkill_set;
+	rfkill_dev->user_claim_unsupported = 1;
+
+	err = rfkill_register(rfkill_dev);
+	if (err) {
+		kfree(rfkill_dev->data);
+		rfkill_free(rfkill_dev);
+		return ERR_PTR(err);
+	}
+	return rfkill_dev;
+}
+
+static int acer_rfkill_init(struct device *dev)
+{
+	wireless_rfkill = acer_rfkill_register(dev, RFKILL_TYPE_WLAN,
+		"acer-wireless", ACER_CAP_WIRELESS);
+	if (IS_ERR(wireless_rfkill))
+		return PTR_ERR(wireless_rfkill);
+
+	if (has_cap(ACER_CAP_BLUETOOTH)) {
+		bluetooth_rfkill = acer_rfkill_register(dev,
+			RFKILL_TYPE_BLUETOOTH, "acer-bluetooth",
+			ACER_CAP_BLUETOOTH);
+		if (IS_ERR(bluetooth_rfkill)) {
+			kfree(wireless_rfkill->data);
+			rfkill_unregister(wireless_rfkill);
+			return PTR_ERR(bluetooth_rfkill);
+		}
+	}
+
+	rfkill_workqueue = create_singlethread_workqueue("rfkill_workqueue");
+	if (!rfkill_workqueue) {
+		if (has_cap(ACER_CAP_BLUETOOTH)) {
+			kfree(bluetooth_rfkill->data);
+			rfkill_unregister(bluetooth_rfkill);
+		}
+		kfree(wireless_rfkill->data);
+		rfkill_unregister(wireless_rfkill);
+		return -ENOMEM;
+	}
+	queue_delayed_work(rfkill_workqueue, &acer_rfkill_work, HZ);
+
+	return 0;
+}
+
+static void acer_rfkill_exit(void)
+{
+	cancel_delayed_work_sync(&acer_rfkill_work);
+	destroy_workqueue(rfkill_workqueue);
+	kfree(wireless_rfkill->data);
+	rfkill_unregister(wireless_rfkill);
+	if (has_cap(ACER_CAP_BLUETOOTH)) {
+		kfree(wireless_rfkill->data);
+		rfkill_unregister(bluetooth_rfkill);
+	}
+	return;
+}
+
+/*
  * Read/ write bool sysfs macro
  */
 #define show_set_bool(value, cap) \
@@ -1026,7 +1150,9 @@ static int __devinit acer_platform_probe(struct platform_device *device)
 			goto error_brightness;
 	}
 
-	return 0;
+	err = acer_rfkill_init(&device->dev);
+
+	return err;
 
 error_brightness:
 	acer_led_exit();
@@ -1040,6 +1166,8 @@ static int acer_platform_remove(struct platform_device *device)
 		acer_led_exit();
 	if (has_cap(ACER_CAP_BRIGHTNESS))
 		acer_backlight_exit();
+
+	acer_rfkill_exit();
 	return 0;
 }