Jetway J2F2WE-1G5: S1 leaves video on

Jetway J2F2WE-1G5: S1 leaves video on

[Forest Bond]

[-- Attachment #1: Type: text/plain, Size: 608 bytes --]

Hi,

I'm using vanilla 2.6.27.4.  I `echo standby >/sys/power/state` and the machine
switches to a console and acts like it is about to go into some sort of lower
power mode, but the video stays on.  Is this normal?

I've not used S1 before, mostly S3.  S3 doesn't seem to be supported by this
board (but I'd actually prefer S3, so if you have any advice as to how I might
enable it, please let me know).

What information might be helpful for troubleshooting this issue (if it is, in
fact, an issue)?

Thanks,
Forest
-- 
Forest Bond
http://www.alittletooquiet.net
http://www.pytagsfs.org

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: Jetway J2F2WE-1G5: S1 leaves video on

[Matthew Garrett]

On Wed, Oct 29, 2008 at 02:25:44PM -0400, Forest Bond wrote:
> Hi,
> 
> I'm using vanilla 2.6.27.4.  I `echo standby >/sys/power/state` and the machine
> switches to a console and acts like it is about to go into some sort of lower
> power mode, but the video stays on.  Is this normal?

Yes, that's common. You'll need an in-kernel video driver that provides 
a suspend method for the device.

-- 
Matthew Garrett | mjg59@srcf.ucam.org

Re: Jetway J2F2WE-1G5: S1 leaves video on

[Stephane Ascoet]

Forest Bond a écrit :
> Hi,
Hi, I wrote here 
<http://community.ofset.org/index.php/Freeduc-cd_how_to#Energy_:> how I solved 
the problem.

-- 
Sincerely, Stephane Ascoet
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html