From: Bjorn Helgaas <bjorn.helgaas@hp.com>
To: linux-acpi@vger.kernel.org
Cc: Zhao Yakui <yakui.zhao@intel.com>,
Alexey Starikovskiy <astarikovskiy@suse.de>
Subject: [PATCH 08/11] ACPI: remove ACPI dependency on PCI
Date: Wed, 05 Nov 2008 16:18:13 -0700 [thread overview]
Message-ID: <20081105231813.26131.16551.stgit@bob.kio> (raw)
In-Reply-To: <20081105231710.26131.3110.stgit@bob.kio>
Allow ACPI to build without CONFIG_PCI.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
---
drivers/acpi/Kconfig | 1 -
drivers/acpi/osl.c | 8 ++++++++
drivers/acpi/reboot.c | 7 +++++--
drivers/pnp/pnpacpi/rsparser.c | 6 ++++--
4 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 7962bfc..2e6f757 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -6,7 +6,6 @@ menuconfig ACPI
bool "ACPI (Advanced Configuration and Power Interface) Support"
depends on !IA64_HP_SIM
depends on IA64 || X86
- depends on PCI
depends on PM
select PNP
default y
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 4be2521..e162be5 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -546,6 +546,7 @@ acpi_status
acpi_os_read_pci_configuration(struct acpi_pci_id * pci_id, u32 reg,
u32 *value, u32 width)
{
+#ifdef CONFIG_PCI
int result, size;
if (!value)
@@ -570,12 +571,16 @@ acpi_os_read_pci_configuration(struct acpi_pci_id * pci_id, u32 reg,
reg, size, value);
return (result ? AE_ERROR : AE_OK);
+#else
+ return AE_ERROR;
+#endif
}
acpi_status
acpi_os_write_pci_configuration(struct acpi_pci_id * pci_id, u32 reg,
acpi_integer value, u32 width)
{
+#ifdef CONFIG_PCI
int result, size;
switch (width) {
@@ -597,6 +602,9 @@ acpi_os_write_pci_configuration(struct acpi_pci_id * pci_id, u32 reg,
reg, size, value);
return (result ? AE_ERROR : AE_OK);
+#else
+ return AE_ERROR;
+#endif
}
/* TODO: Change code to take advantage of driver model more */
diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c
index 755baf2..a5af8b7 100644
--- a/drivers/acpi/reboot.c
+++ b/drivers/acpi/reboot.c
@@ -6,9 +6,11 @@
void acpi_reboot(void)
{
struct acpi_generic_address *rr;
- struct pci_bus *bus0;
u8 reset_value;
+#ifdef CONFIG_PCI
+ struct pci_bus *bus0;
unsigned int devfn;
+#endif
if (acpi_disabled)
return;
@@ -44,6 +46,7 @@ void acpi_reboot(void)
/* The reset register can only exist in I/O, Memory or PCI config space
* on a device on bus 0. */
switch (rr->space_id) {
+#ifdef CONFIG_PCI
case ACPI_ADR_SPACE_PCI_CONFIG:
/* The reset register can only live on bus 0. */
bus0 = pci_find_bus(0, 0);
@@ -57,7 +60,7 @@ void acpi_reboot(void)
pci_bus_write_config_byte(bus0, devfn,
(rr->address & 0xffff), reset_value);
break;
-
+#endif
case ACPI_ADR_SPACE_SYSTEM_MEMORY:
case ACPI_ADR_SPACE_SYSTEM_IO:
printk(KERN_DEBUG "ACPI MEMORY or I/O RESET_REG.\n");
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index adf1785..96992db 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -124,9 +124,11 @@ static void pnpacpi_parse_allocated_irqresource(struct pnp_dev *dev,
flags = irq_flags(triggering, polarity, shareable);
irq = acpi_register_gsi(gsi, triggering, polarity);
- if (irq >= 0)
+ if (irq >= 0) {
+#ifdef CONFIG_PCI
pcibios_penalize_isa_irq(irq, 1);
- else
+#endif
+ } else
flags |= IORESOURCE_DISABLED;
pnp_add_irq_resource(dev, irq, flags);
next prev parent reply other threads:[~2008-11-05 23:18 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-05 23:17 [PATCH 00/11] RFC: various ACPI core cleanups Bjorn Helgaas
2008-11-05 23:17 ` [PATCH 01/11] ACPI: update debug parameter documentation Bjorn Helgaas
2008-11-06 20:29 ` Len Brown
2008-11-06 21:22 ` Bjorn Helgaas
2008-11-06 22:15 ` Len Brown
2008-11-06 22:24 ` Randy Dunlap
2008-11-05 23:17 ` [PATCH 02/11] ACPI: remove comments about debug layer/level to use Bjorn Helgaas
2008-11-06 20:30 ` Len Brown
2008-11-05 23:17 ` [PATCH 03/11] ACPI: SBS: remove useless acpi_cm_sbs_init() initcall Bjorn Helgaas
2008-11-06 20:31 ` Len Brown
2008-11-05 23:17 ` [PATCH 04/11] ACPI: pci_link: remove acpi_irq_balance_set() interface Bjorn Helgaas
2008-11-06 20:41 ` Len Brown
2008-11-05 23:17 ` [PATCH 05/11] ACPI: remove CONFIG_ACPI_POWER Bjorn Helgaas
2008-11-06 20:42 ` Len Brown
2008-11-05 23:18 ` [PATCH 06/11] ACPI: remove CONFIG_ACPI_EC Bjorn Helgaas
2008-11-06 20:57 ` Len Brown
2008-11-05 23:18 ` [PATCH 07/11] ACPI: add CONFIG_ACPI_PCI Bjorn Helgaas
2008-11-06 19:41 ` Bjorn Helgaas
2008-11-05 23:18 ` Bjorn Helgaas [this message]
2008-11-05 23:18 ` [PATCH 09/11] ACPI: remove ACPI dependency on PM Bjorn Helgaas
2008-11-05 23:18 ` [PATCH 10/11] ia64: remove automatic PM selection Bjorn Helgaas
2008-11-05 23:18 ` [PATCH 11/11] ACPI: call core init functions explicitly instead of using initcalls Bjorn Helgaas
2008-11-06 22:02 ` Len Brown
2008-11-06 23:40 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081105231813.26131.16551.stgit@bob.kio \
--to=bjorn.helgaas@hp.com \
--cc=astarikovskiy@suse.de \
--cc=linux-acpi@vger.kernel.org \
--cc=yakui.zhao@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox