Re: Problems with Toshiba Satellite L355

[Adam Pigg <piggz1@gmail.com>]

On Friday 06 February 2009 01:25:54 yakui_zhao wrote:
> On Fri, 2009-02-06 at 07:11 +0800, Adam Pigg wrote:
> > Hi
> >
> > i have 2 acpi related (i think) problems with my satellite l355 which i
> > hope someone can help with.
> >
> > 1. /proc/acpi/ac_adapter.../state always show the correct state, but
> > acpi_listen and lshal --monitor dont see any un/plug events.
>
> Will you please do the following test?
>    a. kill the process which is using /proc/acpi/event (Use the command
> of "lsof /proc/acpi/event" to get the process ID)
>    b. grep . /sys/firmware/acpi/interrupts/* >interrupts_before;
>    c. cat /proc/acpi/event . then you plug/unplug the AC adapter and see
> whether the ACPI event can be reported
>    d. after the test, grep . /sys/firmware/acpi/interrupts/* >
> interrupts_after
>
I did the above.  Nothing was reported in step c, and there was no differences 
between the two interrupt files.  I have created bug #12641 with all the info 
asked for.
Cheers
>    If no ACPI event is reported, will you please file a bug report at
> http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI and attach the
> output of acpidump, lspci -vxxx ?
>    Thanks.
>
now to try this.......
> > 2. The machine will suspend to ram, resume, but after a second suspend,
> > wont resume.
>
>      Will you please add the boot option of "acpi_sleep=s3_beep" and do
> the following test?
>     a. kill the process which is using /proc/acpi/event
>     b. echo mem > /sys/power/state; dmesg >dmesg_after;
>     c. press the power button and see whether the box can be resumed.
>
>     If it can't be resumed, please reboot the system and check whether
> there exists the file of "dmesg_after".
>     Thanks.
>
> > I think i saw a similar sounding problem on an R500, but it was fixed.
> >
> > Ive attached the output of dmidecode, and am using 2.6.29rc3.
> >
> > Anything else that will  help let me know.
> >
> > Cheers
> >
> > Adam