* Re: X200: Brightness broken since 2.6.29-rc4-58-g4c098bc
[not found] ` <20090213094200.GC17774@elte.hu>
@ 2009-02-13 18:05 ` Len Brown
2009-02-16 9:06 ` ZhangRui
2009-02-16 15:54 ` Nico Schottelius
0 siblings, 2 replies; 8+ messages in thread
From: Len Brown @ 2009-02-13 18:05 UTC (permalink / raw)
To: Ingo Molnar
Cc: Nico Schottelius, LKML, Matthew Garrett, Rafael J. Wysocki,
Andrew Morton, linux-acpi
> > When using
> > - vmlinuz-2.6.29-rc4-ikn-00058-g4c098bc or
> > - vmlinuz-2.6.29-rc4-ikn-00211-g37bed90
> >
> > the brightness of the LCD is almost off (lowest level),
> > although kernel reports otherwise:
> >
> > [10:31] ikn:~% cat /proc/acpi/video/VID/LCD0/brightness
> > levels: 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 100
> > current: 100
> >
> > Changing the brightness via echo 20 > /proc/acpi/video/VID/LCD0/brightness
> > only changes the value displayed, the display always keeps the same
> > brightness.
> >
> > The last time I saw it working was vmlinuz-2.6.29-rc4-ikn-00001-gd5b5623.
Nico,
there are not a lot of changes between rc4 and the breakage,
(and none of them jump out at me) can you git-bisect?
thanks,
Len Brown, Intel Open Source Technology Center
^ permalink raw reply [flat|nested] 8+ messages in thread
* 2.6.29-rc5: Reported regressions from 2.6.28
@ 2009-02-14 20:35 Rafael J. Wysocki
[not found] ` <1234911925.9844.89.camel@gaiman>
2009-02-16 7:29 ` 2.6.29-rc5: Reported regressions from 2.6.28 Jarek Poplawski
0 siblings, 2 replies; 8+ messages in thread
From: Rafael J. Wysocki @ 2009-02-14 20:35 UTC (permalink / raw)
To: Linux Kernel Mailing List
Cc: Adrian Bunk, Andrew Morton, Linus Torvalds, Natalie Protasevich,
Kernel Testers List, Network Development, Linux ACPI,
Linux PM List, Linux SCSI List
This message contains a list of some regressions from 2.6.28, for which there
are no fixes in the mainline I know of. If any of them have been fixed already,
please let me know.
If you know of any other unresolved regressions from 2.6.28, please let me know
either and I'll add them to the list. Also, please let me know if any of the
entries below are invalid.
Each entry from the list will be sent additionally in an automatic reply to
this message with CCs to the people involved in reporting and handling the
issue.
Listed regressions statistics:
Date Total Pending Unresolved
----------------------------------------
2009-02-14 85 33 27
2009-02-08 82 45 36
2009-02-04 66 51 39
2009-01-20 38 35 27
2009-01-11 13 13 10
Unresolved regressions
----------------------
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12706
Subject : Oopses and ACPI problems (Linus 2.6.29-rc4)
Submitter : Darren Salt <linux@youmustbejoking.demon.co.uk>
Date : 2009-02-09 18:26 (6 days old)
References : http://marc.info/?l=linux-kernel&m=123420431709877&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12705
Subject : X200: Brightness broken since 2.6.29-rc4-58-g4c098bc
Submitter : Nico Schottelius <nico-linux-20090213@schottelius.org>
Date : 2009-02-13 9:33 (2 days old)
References : http://marc.info/?l=linux-kernel&m=123451768406825&w=4
Handled-By : Len Brown <lenb@kernel.org>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12681
Subject : s2ram: fails to wake up on Acer Extensa 4220 (SMP disabled)
Submitter : Orivej Desh <smpuj@bk.ru>
Date : 2009-02-09 13:01 (6 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=1cfe62c8010ac56e1bd3827e30386a87cc2f3594
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12680
Subject : Not having a VIA PadLock hardware incurs a long delay in probing on modules insertion attempt.
Submitter : Valentin QUEQUET <v.quequet-techniques@orange.fr>
Date : 2009-02-09 09:12 (6 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12671
Subject : uvc_status_cleanup(): undefined reference to `input_unregister_device'
Submitter : Ingo Molnar <mingo@elte.hu>
Date : 2009-02-08 14:58 (7 days old)
References : http://marc.info/?l=linux-kernel&m=123410529909318&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12670
Subject : BUG: unable to handle kernel paging request at pin_to_kill+0x21
Submitter : Alessandro Bono <alessandro.bono@gmail.com>
Date : 2009-02-08 11:04 (7 days old)
References : http://marc.info/?l=linux-kernel&m=123409113223833&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12668
Subject : USB flash disk surprise disconnect
Submitter : Vegard Nossum <vegard.nossum@gmail.com>
Date : 2009-02-08 10:21 (7 days old)
References : http://marc.info/?l=linux-kernel&m=123408851821292&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12660
Subject : Linux 2.6.28.3 freezing on a 32-bits x86 Thinkpad T43p
Submitter : Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Date : 2009-02-04 21:11 (11 days old)
References : http://marc.info/?l=linux-kernel&m=123378196022258&w=4
Handled-By : Ingo Molnar <mingo@elte.hu>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12650
Subject : Strange load average and ksoftirqd behavior with 2.6.29-rc2-git1
Submitter : Damien Wyart <damien.wyart@free.fr>
Date : 2009-01-20 16:25 (26 days old)
References : http://marc.info/?l=linux-kernel&m=123246937207675&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12617
Subject : unable to compile e100 firmware into kernel
Submitter : Andrey Borzenkov <arvidjaar@mail.ru>
Date : 2009-01-31 15:59 (15 days old)
References : http://marc.info/?l=linux-kernel&m=123341764915181&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12615
Subject : boot hangs while bringing up gianfar ethernet
Submitter : Ira Snyder <iws@ovro.caltech.edu>
Date : 2009-01-29 19:41 (17 days old)
References : http://marc.info/?l=linux-kernel&m=123325817201665&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12613
Subject : [Suspend regression][DRM, RADEON]
Submitter : etienne <etienne.basset@numericable.fr>
Date : 2009-01-28 22:00 (18 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=a9d51a5ad1154b5b20add1e8d30a5564f8aabbe9
References : http://marc.info/?l=linux-kernel&m=123318030419558&w=4
http://marc.info/?l=linux-kernel&m=123334865404574&w=4
http://lkml.org/lkml/2009/2/8/203
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12610
Subject : sync-Regression in 2.6.28.2?
Submitter : Ralf Hildebrandt <Ralf.Hildebrandt@charite.de>
Date : 2009-01-27 9:35 (19 days old)
References : http://marc.info/?l=linux-kernel&m=123304977706620&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12574
Subject : possible circular locking dependency detected
Submitter : Michael S. Tsirkin <m.s.tsirkin@gmail.com>
Date : 2009-01-29 11:35 (17 days old)
References : http://lkml.org/lkml/2009/2/9/205
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12571
Subject : Suspend-resume on Dell Latitude D410 newly broken in 2.6.29-rc*
Submitter : Ross Boswell <drb@med.co.nz>
Date : 2009-01-29 03:46 (17 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12551
Subject : end_request: I/O error, dev cciss/c0d0, sector 87435720
Submitter : Ralf Hildebrandt <ralf.hildebrandt@charite.de>
Date : 2009-01-27 06:51 (19 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12510
Subject : 2.6.29-rc2 dies on startup
Submitter : Ferenc Wagner <wferi@niif.hu>
Date : 2009-01-19 12:53 (27 days old)
References : http://marc.info/?l=linux-kernel&m=123236969321703&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12502
Subject : pipe_read oops on sh
Submitter : Adrian McMenamin <lkmladrian@gmail.com>
Date : 2009-01-15 9:48 (31 days old)
References : http://marc.info/?l=linux-kernel&m=123201298005600&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12501
Subject : build bug in eeepc-laptop.c
Submitter : Ingo Molnar <mingo@elte.hu>
Date : 2009-01-14 17:25 (32 days old)
References : http://lkml.org/lkml/2009/1/14/315
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12499
Subject : Problem with using bluetooth adaper connected to usb port
Submitter : Maciej Rutecki <maciej.rutecki@gmail.com>
Date : 2009-01-13 18:34 (33 days old)
References : http://marc.info/?l=linux-kernel&m=123187185426236&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12497
Subject : new barrier warnings in 2.6.29-rc1
Submitter : Christoph Hellwig <hch@lst.de>
Date : 2009-01-12 15:46 (34 days old)
References : http://marc.info/?l=linux-kernel&m=123177528217154&w=4
Handled-By : Jens Axboe <jens.axboe@oracle.com>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12494
Subject : Sony backlight regression from 2.6.28 to 29-rc
Submitter : Norbert Preining <preining@logic.at>
Date : 2009-01-19 8:14 (27 days old)
References : http://marc.info/?l=linux-acpi&m=123235286829512&w=4
Handled-By : Mattia Dongili <malattia@linux.it>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12490
Subject : ath5k related kernel panic in 2.6.29-rc1
Submitter : Sergey S. Kostyliov <rathamahata@gmail.com>
Date : 2009-01-12 7:38 (34 days old)
References : http://marc.info/?l=linux-kernel&m=123174591509586&w=4
Handled-By : Bob Copeland <me@bobcopeland.com>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12444
Subject : X hangs following switch from radeonfb console - Bisected
Submitter : Graham Murray <graham@gmurray.org.uk>
Date : 2009-01-13 14:03 (33 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=7c1c2871a6a3a114853ec6836e9035ac1c0c7f7a
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12419
Subject : possible circular locking dependency on i915 dma
Submitter : Wang Chen <wangchen@cn.fujitsu.com>
Date : 2009-01-08 14:11 (38 days old)
References : http://marc.info/?l=linux-kernel&m=123142399720125&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12418
Subject : Repeated ioctl(4, 0x40046445, ..) loop in glxgears
Submitter : Pallipadi, Venkatesh <venkatesh.pallipadi@intel.com>
Date : 2009-01-07 22:43 (39 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=7c1c2871a6a3a114853ec6836e9035ac1c0c7f7a
References : http://marc.info/?l=linux-kernel&m=123136836213319&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12414
Subject : iwl4965 cannot use "ap auto" on latest 2.6.28/29?
Submitter : Jeff Chua <jeff.chua.linux@gmail.com>
Date : 2009-01-05 4:13 (41 days old)
References : http://marc.info/?l=linux-kernel&m=123112882127823&w=4
Regressions with patches
------------------------
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12663
Subject : Commit 8c7e58e690ae60ab4215b025f433ed4af261e103 breaks resume
Submitter : Jiri Slaby <jirislaby@gmail.com>
Date : 2009-02-07 18:40 (8 days old)
References : http://lkml.org/lkml/2009/2/7/100
Handled-By : Brian Gerst <brgerst@gmail.com>
Patch : http://lkml.org/lkml/2009/2/7/100
http://lkml.org/lkml/2009/2/8/59
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12659
Subject : Failure to resume two Sandisk USB flash drives attached to a Belkin USB Busport Mobile (F5U022).
Submitter : Miles Lane <miles.lane@gmail.com>
Date : 2009-02-03 4:58 (12 days old)
References : http://marc.info/?l=linux-kernel&m=123363718614763&w=4
Handled-By : Rafael J. Wysocki <rjw@sisk.pl>
Patch : http://marc.info/?l=linux-kernel&m=123456499020575&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12618
Subject : hackbench [pthread mode] regression with 2.6.29-rc3
Submitter : Zhang, Yanmin <yanmin_zhang@linux.intel.com>
Date : 2009-02-01 7:30 (14 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=490dea45d00f01847ebebd007685d564aaf2cd98
References : http://marc.info/?l=linux-kernel&m=123347347726527&w=4
Handled-By : Peter Zijlstra <peterz@infradead.org>
Patch : http://marc.info/?l=linux-kernel&m=123383366122146&w=4
http://marc.info/?l=linux-kernel&m=123383366222152&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12609
Subject : v2.6.29-rc2 libata sff 32bit PIO regression
Submitter : Larry Finger <Larry.Finger@lwfinger.net>
Date : 2009-01-23 23:52 (23 days old)
References : http://marc.info/?l=linux-kernel&m=123275478111406&w=4
http://marc.info/?l=linux-kernel&m=123254501314058&w=4
Handled-By : Mikael Pettersson <mikpe@it.uu.se>
Hugh Dickins <hugh@veritas.com>
Sergei Shtylyov <sshtylyov@ru.mvista.com>
Patch : http://marc.info/?l=linux-kernel&m=123412278730735&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12496
Subject : swsusp cannot find resume device (sometimes)
Submitter : Rafael J. Wysocki <rjw@sisk.pl>
Date : 2009-01-09 12:24 (37 days old)
References : http://marc.info/?l=linux-kernel&m=123150395731165&w=4
Handled-By : Arjan van de Ven <arjan@infradead.org>
Patch : http://marc.info/?l=linux-kernel&m=123156441218358&w=4
http://marc.info/?t=123156453100002&r=1&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12491
Subject : i915 lockdep warning
Submitter : Brandeburg, Jesse <jesse.brandeburg@intel.com>
Date : 2009-01-13 23:17 (33 days old)
References : http://marc.info/?l=linux-kernel&m=123188898423532&w=4
Handled-By : Roland Dreier <rolandd@cisco.com>
Patch : http://marc.info/?l=linux-kernel&m=123378709730700&w=2
For details, please visit the bug entries and follow the links given in
references.
As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions from 2.6.28,
unresolved as well as resolved, at:
http://bugzilla.kernel.org/show_bug.cgi?id=12398
Please let me know if there are any Bugzilla entries that should be added to
the list in there.
Thanks,
Rafael
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: 2.6.29-rc5: Reported regressions from 2.6.28
2009-02-14 20:35 2.6.29-rc5: Reported regressions from 2.6.28 Rafael J. Wysocki
[not found] ` <1234911925.9844.89.camel@gaiman>
@ 2009-02-16 7:29 ` Jarek Poplawski
2009-02-16 21:11 ` Rafael J. Wysocki
1 sibling, 1 reply; 8+ messages in thread
From: Jarek Poplawski @ 2009-02-16 7:29 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Linux Kernel Mailing List, Adrian Bunk, Andrew Morton,
Linus Torvalds, Natalie Protasevich, Kernel Testers List,
Network Development, Linux ACPI, Linux PM List, Linux SCSI List
On 14-02-2009 21:35, Rafael J. Wysocki wrote:
> This message contains a list of some regressions from 2.6.28, for which there
> are no fixes in the mainline I know of. If any of them have been fixed already,
> please let me know.
...
> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12615
> Subject : boot hangs while bringing up gianfar ethernet
> Submitter : Ira Snyder <iws@ovro.caltech.edu>
> Date : 2009-01-29 19:41 (17 days old)
> References : http://marc.info/?l=linux-kernel&m=123325817201665&w=4
Fixed by:
commit 8707bdd48ab705a459ac1b12014075a139d1d4f9
gianfar: Fix boot hangs while bringing up gianfar ethernet
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=8707bdd48ab705a459ac1b12014075a139d1d4f9
Cheers,
Jarek P.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: X200: Brightness broken since 2.6.29-rc4-58-g4c098bc
2009-02-13 18:05 ` X200: Brightness broken since 2.6.29-rc4-58-g4c098bc Len Brown
@ 2009-02-16 9:06 ` ZhangRui
2009-02-16 10:58 ` Nico Schottelius
2009-02-16 15:54 ` Nico Schottelius
1 sibling, 1 reply; 8+ messages in thread
From: ZhangRui @ 2009-02-16 9:06 UTC (permalink / raw)
To: Len Brown
Cc: Ingo Molnar, Nico Schottelius, LKML, Matthew Garrett,
Rafael J. Wysocki, Andrew Morton, linux-acpi@vger.kernel.org
hi, Nico,
do you have an external graphics card as well as the integrated intel
graphics on your laptops?
please attach the dmesg and lspci output.
thanks,
rui
On Sat, 2009-02-14 at 02:05 +0800, Len Brown wrote:
> > > When using
> > > - vmlinuz-2.6.29-rc4-ikn-00058-g4c098bc or
> > > - vmlinuz-2.6.29-rc4-ikn-00211-g37bed90
> > >
> > > the brightness of the LCD is almost off (lowest level),
> > > although kernel reports otherwise:
> > >
> > > [10:31] ikn:~% cat /proc/acpi/video/VID/LCD0/brightness
> > > levels: 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 100
> > > current: 100
> > >
> > > Changing the brightness via echo 20 > /proc/acpi/video/VID/LCD0/brightness
> > > only changes the value displayed, the display always keeps the same
> > > brightness.
> > >
> > > The last time I saw it working was vmlinuz-2.6.29-rc4-ikn-00001-gd5b5623.
>
> Nico,
> there are not a lot of changes between rc4 and the breakage,
> (and none of them jump out at me) can you git-bisect?
>
> thanks,
> Len Brown, Intel Open Source Technology Center
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: X200: Brightness broken since 2.6.29-rc4-58-g4c098bc
2009-02-16 9:06 ` ZhangRui
@ 2009-02-16 10:58 ` Nico Schottelius
0 siblings, 0 replies; 8+ messages in thread
From: Nico Schottelius @ 2009-02-16 10:58 UTC (permalink / raw)
To: ZhangRui
Cc: Len Brown, Ingo Molnar, Nico Schottelius, LKML, Matthew Garrett,
Rafael J. Wysocki, Andrew Morton, linux-acpi@vger.kernel.org
[-- Attachment #1: Type: text/plain, Size: 236024 bytes --]
Hello rui,
ZhangRui [Mon, Feb 16, 2009 at 05:06:59PM +0800]:
> do you have an external graphics card as well as the integrated intel
> graphics on your laptops?
No, just the interal one.
> please attach the dmesg and lspci output.
dmesg und lspci running 2.6.29-rc4-ikn-00001-gd5b5623 attached.
I'm upgrading to v2.6.29-rc5 now and will test the supplied patch,
if the error is still there.
Sincerly,
Nico
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
03:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
[ 0.000000] Linux version 2.6.29-rc4-ikn-00001-gd5b5623 (compiler@ikn) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #9 SMP PREEMPT Mon Feb 9 20:55:46 CET 2009
[ 0.000000] Command line: root=/dev/sda1 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007c4a1000 (usable)
[ 0.000000] BIOS-e820: 000000007c4a1000 - 000000007c4a7000 (reserved)
[ 0.000000] BIOS-e820: 000000007c4a7000 - 000000007c5b7000 (usable)
[ 0.000000] BIOS-e820: 000000007c5b7000 - 000000007c60f000 (reserved)
[ 0.000000] BIOS-e820: 000000007c60f000 - 000000007c6c6000 (usable)
[ 0.000000] BIOS-e820: 000000007c6c6000 - 000000007c6d1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007c6d1000 - 000000007c6d4000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007c6d4000 - 000000007c6d8000 (reserved)
[ 0.000000] BIOS-e820: 000000007c6d8000 - 000000007c6dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007c6dc000 - 000000007c6df000 (reserved)
[ 0.000000] BIOS-e820: 000000007c6df000 - 000000007c706000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007c706000 - 000000007c708000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007c708000 - 000000007c90f000 (reserved)
[ 0.000000] BIOS-e820: 000000007c90f000 - 000000007c99f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007c99f000 - 000000007c9ff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007c9ff000 - 000000007ca00000 (usable)
[ 0.000000] BIOS-e820: 000000007cc00000 - 000000007f000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x7ca00 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007ca00000
[ 0.000000] 0000000000 - 007ca00000 page 2M
[ 0.000000] kernel direct mapping tables up to 7ca00000 @ 8000-b000
[ 0.000000] last_map_addr: 7ca00000 end: 7ca00000
[ 0.000000] ACPI: RSDP 000F73A0, 0024 (r2 LENOVO)
[ 0.000000] ACPI: XSDT 7C97BD45, 009C (r1 LENOVO TP-6D 1050 LTP 0)
[ 0.000000] ACPI: FACP 7C97BF00, 00F4 (r3 LENOVO TP-6D 1050 LNVO 1)
[ 0.000000] ACPI Warning (tbfadt-0568): 32/64X length mismatch in Pm1aControlBlock: 16/32 [20081204]
[ 0.000000] ACPI Warning (tbfadt-0412): Invalid length for Pm1aControlBlock: 32, using default 16 [20081204]
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[ 0.000000] ACPI: DSDT 7C97C2F4, D910 (r1 LENOVO TP-6D 1050 MSFT 3000000)
[ 0.000000] ACPI: FACS 7C98E000, 0040
[ 0.000000] ACPI: SSDT 7C97C0B4, 0240 (r1 LENOVO TP-6D 1050 MSFT 3000000)
[ 0.000000] ACPI: ECDT 7C989C04, 0052 (r1 LENOVO TP-6D 1050 LNVO 1)
[ 0.000000] ACPI: APIC 7C989C56, 0078 (r1 LENOVO TP-6D 1050 LNVO 1)
[ 0.000000] ACPI: MCFG 7C989CCE, 003C (r1 LENOVO TP-6D 1050 LNVO 1)
[ 0.000000] ACPI: HPET 7C989D0A, 0038 (r1 LENOVO TP-6D 1050 LNVO 1)
[ 0.000000] ACPI: SLIC 7C989DC2, 0176 (r1 LENOVO TP-6D 1050 LTP 0)
[ 0.000000] ACPI: BOOT 7C989F38, 0028 (r1 LENOVO TP-6D 1050 LTP 1)
[ 0.000000] ACPI: ASF! 7C989F60, 00A0 (r16 LENOVO TP-6D 1050 PTL 1)
[ 0.000000] ACPI: SSDT 7C98D203, 055F (r1 LENOVO TP-6D 1050 INTL 20050513)
[ 0.000000] ACPI: TCPA 7C707000, 0032 (r0 0 0)
[ 0.000000] ACPI: DMAR 7C706000, 0120 (r1 \x01 1 0)
[ 0.000000] ACPI: SSDT 7C6D3000, 0655 (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7C6D2000, 0274 (r1 PmRef Cpu0Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7C6D1000, 0242 (r1 PmRef ApTst 3000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 007ca00000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 000073641c] TEXT DATA BSS ==> [0000200000 - 000073641c]
[ 0.000000] #3 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
[ 0.000000] #4 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
[ 0.000000] found SMP MP-table at [ffff8800000f73e0] 000f73e0
[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007c4a1
[ 0.000000] 0: 0x0007c4a7 -> 0x0007c5b7
[ 0.000000] 0: 0x0007c60f -> 0x0007c6c6
[ 0.000000] 0: 0x0007c9ff -> 0x0007ca00
[ 0.000000] On node 0 totalpages: 509447
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1437 pages reserved
[ 0.000000] DMA zone: 2505 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6923 pages used for memmap
[ 0.000000] DMA32 zone: 498526 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] 4 Processors exceeds NR_CPUS limit of 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f000000:61000000)
[ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 501031
[ 0.000000] Kernel command line: root=/dev/sda1 ro
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2260.956 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004000] Memory: 1999600k/2041856k available (2891k kernel code, 4068k absent, 37460k reserved, 1408k data, 336k init)
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.91 BogoMIPS (lpj=9043824)
[ 0.004000] Security Framework initialized
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] [ds] using Core 2/Atom configuration
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] CPU0: Thermal monitoring enabled (TM2)
[ 0.004000] using mwait in idle threads.
[ 0.004000] ACPI: Core revision 20081204
[ 0.048093] Setting APIC routing to flat
[ 0.048635] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.097472] CPU0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[ 0.100001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4522.06 BogoMIPS (lpj=9044129)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] [ds] using Core 2/Atom configuration
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.189268] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[ 0.190631] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.192042] Brought up 2 CPUs
[ 0.192173] Total of 2 processors activated (9043.97 BogoMIPS).
[ 0.192411] net_namespace: 1752 bytes
[ 0.196246] regulator: core version 0.5
[ 0.196365] NET: Registered protocol family 16
[ 0.197132] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.197348] ACPI: bus type pci registered
[ 0.197757] PCI: Using configuration type 1 for base access
[ 0.204094] bio: create slab <bio-0> at 0
[ 0.211641] ACPI: EC: EC description table is found, configuring boot EC
[ 0.232787] ACPI: BIOS _OSI(Linux) query ignored
[ 0.233447] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.253876] ACPI: Interpreter enabled
[ 0.254009] ACPI: (supports S0 S3 S5)
[ 0.254314] ACPI: Using IOAPIC for interrupt routing
[ 0.300583] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.300720] ACPI: EC: driver started in interrupt mode
[ 0.306782] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.308608] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.308826] pci 0000:00:02.0: reg 10 64bit mmio: [0xf2000000-0xf23fffff]
[ 0.308826] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.308826] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
[ 0.308826] pci 0000:00:02.1: reg 10 64bit mmio: [0xf2400000-0xf24fffff]
[ 0.308826] pci 0000:00:03.0: reg 10 64bit mmio: [0xf2826800-0xf282680f]
[ 0.308826] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.308826] pci 0000:00:03.0: PME# disabled
[ 0.308865] pci 0000:00:19.0: reg 10 32bit mmio: [0xf2600000-0xf261ffff]
[ 0.308878] pci 0000:00:19.0: reg 14 32bit mmio: [0xf2625000-0xf2625fff]
[ 0.308890] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
[ 0.308967] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.309104] pci 0000:00:19.0: PME# disabled
[ 0.312103] pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
[ 0.312236] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
[ 0.312368] pci 0000:00:1a.2: reg 20 io port: [0x18a0-0x18bf]
[ 0.312504] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf2826c00-0xf2826fff]
[ 0.312604] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.312741] pci 0000:00:1a.7: PME# disabled
[ 0.312945] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf2620000-0xf2623fff]
[ 0.313028] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.313164] pci 0000:00:1b.0: PME# disabled
[ 0.313403] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.313539] pci 0000:00:1c.0: PME# disabled
[ 0.313781] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.313918] pci 0000:00:1c.1: PME# disabled
[ 0.314161] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.314298] pci 0000:00:1c.3: PME# disabled
[ 0.314530] pci 0000:00:1d.0: reg 20 io port: [0x18c0-0x18df]
[ 0.314530] pci 0000:00:1d.1: reg 20 io port: [0x18e0-0x18ff]
[ 0.314530] pci 0000:00:1d.2: reg 20 io port: [0x1c00-0x1c1f]
[ 0.314530] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf2827000-0xf28273ff]
[ 0.314530] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.314530] pci 0000:00:1d.7: PME# disabled
[ 0.314530] pci 0000:00:1f.2: reg 10 io port: [0x1c48-0x1c4f]
[ 0.314530] pci 0000:00:1f.2: reg 14 io port: [0x183c-0x183f]
[ 0.314530] pci 0000:00:1f.2: reg 18 io port: [0x1c40-0x1c47]
[ 0.314530] pci 0000:00:1f.2: reg 1c io port: [0x1838-0x183b]
[ 0.314530] pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
[ 0.314530] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf2826000-0xf28267ff]
[ 0.314530] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.314530] pci 0000:00:1f.2: PME# disabled
[ 0.314530] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf2827400-0xf28274ff]
[ 0.314530] pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
[ 0.314530] pci 0000:03:00.0: reg 10 64bit mmio: [0xf2500000-0xf2501fff]
[ 0.314530] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.314530] pci 0000:03:00.0: PME# disabled
[ 0.314530] pci 0000:00:1c.1: bridge 32bit mmio: [0xf2500000-0xf25fffff]
[ 0.314530] pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff]
[ 0.314530] pci 0000:00:1c.3: bridge 32bit mmio: [0xf0000000-0xf1ffffff]
[ 0.314530] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf2900000-0xf29fffff]
[ 0.314530] pci 0000:00:1e.0: transparent bridge
[ 0.314632] pci_bus 0000:00: on NUMA node 0
[ 0.314653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.315164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.315389] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.315618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.336565] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.337754] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.338935] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.340166] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.341347] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.342526] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.343704] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.344857] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.345684] ACPI: Power Resource [PUBS] (on)
[ 0.345684] SCSI subsystem initialized
[ 0.348092] libata version 3.00 loaded.
[ 0.348127] PCI: Using ACPI for IRQ routing
[ 0.364037] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.364399] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.390864] pnp: PnP ACPI init
[ 0.391009] ACPI: bus type pnp registered
[ 0.461054] pnp: PnP ACPI: found 10 devices
[ 0.461188] ACPI: ACPI bus type pnp unregistered
[ 0.461340] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.461476] system 00:00: iomem range 0xc0000-0xc3fff has been reserved
[ 0.461612] system 00:00: iomem range 0xc4000-0xc7fff has been reserved
[ 0.461749] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
[ 0.461884] system 00:00: iomem range 0xcc000-0xcffff has been reserved
[ 0.462019] system 00:00: iomem range 0xd0000-0xd3fff has been reserved
[ 0.462155] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
[ 0.462291] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 0.462427] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 0.462563] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 0.462699] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[ 0.462835] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.462984] system 00:00: iomem range 0x100000-0x7effffff could not be reserved
[ 0.463198] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
[ 0.463412] system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
[ 0.463635] system 00:02: ioport range 0x164e-0x164f has been reserved
[ 0.463771] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.463906] system 00:02: ioport range 0x1180-0x11ff has been reserved
[ 0.464042] system 00:02: ioport range 0x800-0x80f has been reserved
[ 0.464177] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.464312] system 00:02: ioport range 0x1600-0x1641 has been reserved
[ 0.464447] system 00:02: ioport range 0x1600-0x161b has been reserved
[ 0.464584] system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.464721] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.464857] system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved
[ 0.464994] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.465131] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.465268] system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
[ 0.470991] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.471128] pci 0000:00:1c.0: IO window: disabled
[ 0.471264] pci 0000:00:1c.0: MEM window: disabled
[ 0.471399] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.471538] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.471671] pci 0000:00:1c.1: IO window: disabled
[ 0.471808] pci 0000:00:1c.1: MEM window: 0xf2500000-0xf25fffff
[ 0.471944] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.472096] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 0.472231] pci 0000:00:1c.3: IO window: 0x2000-0x2fff
[ 0.472368] pci 0000:00:1c.3: MEM window: 0xf0000000-0xf1ffffff
[ 0.472505] pci 0000:00:1c.3: PREFETCH window: 0x000000f2900000-0x000000f29fffff
[ 0.472725] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0d
[ 0.472857] pci 0000:00:1e.0: IO window: disabled
[ 0.472993] pci 0000:00:1e.0: MEM window: disabled
[ 0.473127] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.473283] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.473422] pci 0000:00:1c.0: setting latency timer to 64
[ 0.473439] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.473577] pci 0000:00:1c.1: setting latency timer to 64
[ 0.473593] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.473730] pci 0000:00:1c.3: setting latency timer to 64
[ 0.473743] pci 0000:00:1e.0: setting latency timer to 64
[ 0.473751] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.473756] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.473762] pci_bus 0000:02: resource 0 mem: [0x0-0x0]
[ 0.473766] pci_bus 0000:02: resource 1 mem: [0x0-0x0]
[ 0.473771] pci_bus 0000:02: resource 2 mem: [0x0-0x0]
[ 0.473775] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
[ 0.473779] pci_bus 0000:03: resource 0 mem: [0x0-0x0]
[ 0.473784] pci_bus 0000:03: resource 1 mem: [0xf2500000-0xf25fffff]
[ 0.473789] pci_bus 0000:03: resource 2 mem: [0x0-0x0]
[ 0.473793] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
[ 0.473798] pci_bus 0000:05: resource 0 io: [0x2000-0x2fff]
[ 0.473803] pci_bus 0000:05: resource 1 mem: [0xf0000000-0xf1ffffff]
[ 0.473808] pci_bus 0000:05: resource 2 mem: [0xf2900000-0xf29fffff]
[ 0.473813] pci_bus 0000:05: resource 3 mem: [0x0-0x0]
[ 0.473817] pci_bus 0000:0d: resource 0 mem: [0x0-0x0]
[ 0.473821] pci_bus 0000:0d: resource 1 mem: [0x0-0x0]
[ 0.473826] pci_bus 0000:0d: resource 2 mem: [0x0-0x0]
[ 0.473830] pci_bus 0000:0d: resource 3 io: [0x00-0xffff]
[ 0.473835] pci_bus 0000:0d: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.473891] NET: Registered protocol family 2
[ 0.520123] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.521450] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.524397] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.525362] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.525497] TCP reno registered
[ 0.536194] NET: Registered protocol family 1
[ 0.536823] Simple Boot Flag at 0x35 set to 0x1
[ 0.539233] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.545238] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.550862] Switched to high resolution mode on CPU 1
[ 0.551019] VFS: Disk quotas dquot_6.5.2
[ 0.551351] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.552009] Switched to high resolution mode on CPU 0
[ 0.552723] JFS: nTxBlock = 8192, nTxLock = 65536
[ 0.557941] msgmni has been set to 3906
[ 0.558571] alg: No test for stdrng (krng)
[ 0.558724] io scheduler noop registered
[ 0.558855] io scheduler anticipatory registered (default)
[ 0.558989] io scheduler deadline registered
[ 0.559292] io scheduler cfq registered
[ 0.559447] pci 0000:00:02.0: Boot video device
[ 0.559935] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.560043] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.560363] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.560463] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.560769] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 0.560869] pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 0.562321] ACPI: AC Adapter [AC] (off-line)
[ 0.606430] ACPI: Battery Slot [BAT0] (battery present)
[ 0.606895] input: Power Button (FF) as /class/input/input0
[ 0.607100] ACPI: Power Button (FF) [PWRF]
[ 0.607481] input: Lid Switch as /class/input/input1
[ 0.608574] ACPI: Lid Switch [LID]
[ 0.608934] input: Sleep Button (CM) as /class/input/input2
[ 0.609095] ACPI: Sleep Button (CM) [SLPB]
[ 0.611329] ACPI: SSDT 7C6D6C20, 02C8 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 0.613345] ACPI: SSDT 7C6D4020, 087A (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 0.623915] Monitor-Mwait will be used to enter C-1 state
[ 0.623934] Monitor-Mwait will be used to enter C-2 state
[ 0.623950] Monitor-Mwait will be used to enter C-3 state
[ 0.624071] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.624605] processor ACPI_CPU:00: registered as cooling_device0
[ 0.624744] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.626650] ACPI: SSDT 7C6D5CA0, 01CF (r1 PmRef ApIst 3000 INTL 20050624)
[ 0.628458] ACPI: SSDT 7C6D5F20, 008D (r1 PmRef ApCst 3000 INTL 20050624)
[ 0.634120] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.634546] processor ACPI_CPU:01: registered as cooling_device1
[ 0.634686] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.686529] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.690947] ACPI: Thermal Zone [THM0] (29 C)
[ 0.693596] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.696642] ACPI: Thermal Zone [THM1] (31 C)
[ 0.794559] Linux agpgart interface v0.103
[ 3.808022] floppy0: no floppy controllers found
[ 3.811535] brd: module loaded
[ 3.811853] Uniform Multi-Platform E-IDE driver
[ 3.812201] ide-gd driver 1.18
[ 3.812612] Driver 'sd' needs updating - please use bus_type methods
[ 3.812864] ahci 0000:00:1f.2: version 3.0
[ 3.812894] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 3.813084] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 3.813154] ahci: SSS flag set, parallel bus scan disabled
[ 3.813323] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 3.813538] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
[ 3.813754] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.814090] scsi0 : ahci
[ 3.814441] scsi1 : ahci
[ 3.814740] scsi2 : ahci
[ 3.815031] scsi3 : ahci
[ 3.816745] ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826100 irq 27
[ 3.816961] ata2: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826180 irq 27
[ 3.817202] ata3: DUMMY
[ 3.817329] ata4: DUMMY
[ 4.136026] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.180038] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 4.180045] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 4.180271] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[ 4.180278] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 4.181153] ata1.00: ATA-8: ST9250827AS, 3.CMF, max UDMA/100
[ 4.181288] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.191124] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 4.191131] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 4.191356] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[ 4.191362] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 4.192293] ata1.00: configured for UDMA/100
[ 4.219648] ata1.00: configured for UDMA/100
[ 4.219781] ata1: EH complete
[ 4.232173] scsi 0:0:0:0: Direct-Access ATA ST9250827AS 3.CM PQ: 0 ANSI: 5
[ 4.232719] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 4.232961] sd 0:0:0:0: [sda] Write Protect is off
[ 4.233094] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.233148] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.233472] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 4.233714] sd 0:0:0:0: [sda] Write Protect is off
[ 4.233848] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.233899] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.234119] sda: sda1 sda2 sda3
[ 4.291560] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.608023] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.672225] Fusion MPT base driver 3.04.07
[ 4.674570] Copyright (c) 1999-2008 LSI Corporation
[ 4.674713] Fusion MPT SPI Host driver 3.04.07
[ 4.675651] ieee1394: raw1394: /dev/raw1394 device initialized
[ 4.676084] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 4.686430] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.686571] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.687112] mice: PS/2 mouse device common for all mice
[ 4.730059] cpuidle: using governor ladder
[ 4.731512] cpuidle: using governor menu
[ 4.731822] Marking TSC unstable due to TSC halts in idle
[ 4.732162] oprofile: using NMI interrupt.
[ 4.732914] TCP cubic registered
[ 4.733060] NET: Registered protocol family 17
[ 4.735739] registered taskstats version 1
[ 4.737434] input: AT Translated Set 2 keyboard as /class/input/input3
[ 4.988980] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
[ 5.000241] Clocksource tsc unstable (delta = -231254716 ns)
[ 5.299633] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 5.318896] input: TPPS/2 IBM TrackPoint as /class/input/input4
[ 5.437924] VFS: Mounted root (jfs filesystem) readonly on device 8:1.
[ 5.438094] Freeing unused kernel memory: 336k freed
[ 8.395219] Non-volatile memory driver v1.3
[ 8.593527] thinkpad_acpi: ThinkPad ACPI Extras v0.22
[ 8.593637] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 8.593742] thinkpad_acpi: ThinkPad BIOS 6DET28WW (1.05 ), EC 7XHT21WW-1.03
[ 8.593848] thinkpad_acpi: Lenovo ThinkPad X200, model 7458AH8
[ 8.594664] thinkpad_acpi: radio switch found; radios are enabled
[ 8.594885] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 8.595057] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 8.603275] Registered led device: tpacpi::thinklight
[ 8.603417] Registered led device: tpacpi::power
[ 8.603535] Registered led device: tpacpi:orange:batt
[ 8.603657] Registered led device: tpacpi:green:batt
[ 8.603780] Registered led device: tpacpi::dock_active
[ 8.603902] Registered led device: tpacpi::bay_active
[ 8.604023] Registered led device: tpacpi::dock_batt
[ 8.604149] Registered led device: tpacpi::unknown_led
[ 8.604267] Registered led device: tpacpi::standby
[ 8.606649] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[ 8.607051] input: ThinkPad Extra Buttons as /class/input/input5
[ 8.823710] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 8.824747] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 8.827864] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 8.907708] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 8.907822] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 8.907968] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 8.908092] e1000e 0000:00:19.0: setting latency timer to 64
[ 8.908190] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 8.999398] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:16:09:46:11
[ 8.999565] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 8.999691] 0000:00:19.0: eth0: MAC: 6, PHY: 8, PBA No: 1008ff-0ff
[ 9.033070] usbcore: registered new interface driver usbfs
[ 9.033198] usbcore: registered new interface driver hub
[ 9.073057] usbcore: registered new device driver usb
[ 9.101455] ACPI: WMI: Mapper loaded
[ 9.365564] rtc_cmos 00:07: RTC can wake from S4
[ 9.365772] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 9.365911] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 9.413792] uhci_hcd: USB Universal Host Controller Interface driver
[ 9.414492] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 9.414602] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 9.414713] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 9.414716] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 9.414853] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 9.415050] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 9.415269] usb usb1: configuration #1 chosen from 1 choice
[ 9.415397] hub 1-0:1.0: USB hub found
[ 9.415502] hub 1-0:1.0: 2 ports detected
[ 9.415704] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 9.415813] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 9.415816] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 9.415936] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 9.416131] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 9.416306] usb usb2: configuration #1 chosen from 1 choice
[ 9.416431] hub 2-0:1.0: USB hub found
[ 9.416535] hub 2-0:1.0: 2 ports detected
[ 9.417249] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 9.417359] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 9.417467] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 9.417470] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 9.417591] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 9.417783] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
[ 9.417958] usb usb3: configuration #1 chosen from 1 choice
[ 9.418084] hub 3-0:1.0: USB hub found
[ 9.418189] hub 3-0:1.0: 2 ports detected
[ 9.418896] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 9.419002] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.419110] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 9.419113] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 9.419235] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 9.419427] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[ 9.419601] usb usb4: configuration #1 chosen from 1 choice
[ 9.419726] hub 4-0:1.0: USB hub found
[ 9.419829] hub 4-0:1.0: 2 ports detected
[ 9.420015] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.420123] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 9.420126] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 9.420247] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 9.420437] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
[ 9.420608] usb usb5: configuration #1 chosen from 1 choice
[ 9.420734] hub 5-0:1.0: USB hub found
[ 9.420836] hub 5-0:1.0: 2 ports detected
[ 9.421042] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 9.421151] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 9.421153] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 9.421273] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 9.421464] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[ 9.421637] usb usb6: configuration #1 chosen from 1 choice
[ 9.421761] hub 6-0:1.0: USB hub found
[ 9.421865] hub 6-0:1.0: 2 ports detected
[ 9.452771] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.452880] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 9.453963] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 9.454075] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 9.454203] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 9.454206] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 9.454338] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 9.458398] ehci_hcd 0000:00:1a.7: debug port 1
[ 9.458503] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 9.458520] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xf2826c00
[ 9.473011] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 9.473227] usb usb7: configuration #1 chosen from 1 choice
[ 9.473356] hub 7-0:1.0: USB hub found
[ 9.473460] hub 7-0:1.0: 6 ports detected
[ 9.474171] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 9.474284] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 9.474407] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 9.474411] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 9.474535] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 9.478601] ehci_hcd 0000:00:1d.7: debug port 1
[ 9.478706] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 9.478720] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf2827000
[ 9.493013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 9.493234] usb usb8: configuration #1 chosen from 1 choice
[ 9.493366] hub 8-0:1.0: USB hub found
[ 9.493470] hub 8-0:1.0: 6 ports detected
[ 9.505045] cfg80211: Calling CRDA to update world regulatory domain
[ 9.573310] acpi device:03: registered as cooling_device2
[ 9.573685] input: Video Bus as /class/input/input6
[ 9.608158] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 9.829546] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 9.901103] usb 7-6: new high speed USB device using ehci_hcd and address 3
[ 9.934836] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 9.935001] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[ 9.935177] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.935287] iwlagn 0000:03:00.0: setting latency timer to 64
[ 9.935344] iwlagn: Detected Intel Wireless WiFi Link 5300AGN REV=0x24
[ 9.953756] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 9.954088] iwlagn 0000:03:00.0: PCI INT A disabled
[ 9.954388] wmaster0 (iwlagn): not using net_device_ops yet
[ 9.954762] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 10.039758] usb 7-6: configuration #1 chosen from 1 choice
[ 10.136376] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 10.136603] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.150135] wlan0 (iwlagn): not using net_device_ops yet
[ 10.153032] usb 8-6: new high speed USB device using ehci_hcd and address 2
[ 10.294770] usb 8-6: configuration #1 chosen from 1 choice
[ 10.333033] input: HDA Intel at 0xf2620000 irq 17 Mic as /class/input/input7
[ 10.348256] input: HDA Intel at 0xf2620000 irq 17 Mic as /class/input/input8
[ 10.364184] input: HDA Intel at 0xf2620000 irq 17 Headphone as /class/input/input9
[ 10.434486] usbcore: registered new interface driver libusual
[ 10.533355] Initializing USB Mass Storage driver...
[ 10.533844] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 10.539347] scsi4 : SCSI emulation for USB Mass Storage devices
[ 10.540438] usb-storage: device found at 2
[ 10.540440] usbcore: registered new interface driver usb-storage
[ 10.540443] USB Mass Storage support registered.
[ 10.540671] usb-storage: waiting for device to settle before scanning
[ 10.707861] usb 2-1: configuration #1 chosen from 1 choice
[ 14.153784] loop: module loaded
[ 14.841373] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 15.540494] isa bounce pool size: 16 pages
[ 15.541237] scsi 4:0:0:0: Direct-Access RICOH R5U880FlashMedia 0000 PQ: 0 ANSI: 2
[ 15.731688] sd 4:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[ 15.732280] sd 4:0:0:0: [sdb] Write Protect is off
[ 15.732283] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 15.732286] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 15.733899] sd 4:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[ 15.734520] sd 4:0:0:0: [sdb] Write Protect is off
[ 15.734523] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 15.734526] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 15.734530] sdb: sdb1
[ 15.736877] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 15.737438] usb-storage: device scan complete
[ 28.289104] fuse init (API version 7.11)
[ 31.689617] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 31.745207] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 32.233214] Loading iSCSI transport class v2.0-870.
[ 32.293802] iscsi: registered transport (tcp)
[ 32.428677] NET: Registered protocol family 10
[ 32.429890] lo: Disabled Privacy Extensions
[ 32.431162] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.591208] iscsi: registered transport (iser)
[ 40.594979] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it
[ 40.595208] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation
[ 40.679142] input: /usr/sbin/thinkpad-keys as /class/input/input10
[ 49.009756] Bluetooth: Core ver 2.14
[ 49.010442] NET: Registered protocol family 31
[ 49.010575] Bluetooth: HCI device and connection manager initialized
[ 49.010711] Bluetooth: HCI socket layer initialized
[ 49.075183] Bluetooth: L2CAP ver 2.11
[ 49.075330] Bluetooth: L2CAP socket layer initialized
[ 49.087281] Bluetooth: RFCOMM socket layer initialized
[ 49.087443] Bluetooth: RFCOMM TTY layer initialized
[ 49.087585] Bluetooth: RFCOMM ver 1.10
[ 49.558939] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 49.559169] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[ 49.559282] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[ 49.559368] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode
[ 49.745603] iwlagn loaded firmware version 5.4.1.16
[ 49.904038] Registered led device: iwl-phy0:radio
[ 49.904343] Registered led device: iwl-phy0:assoc
[ 49.904542] Registered led device: iwl-phy0:RX
[ 49.904738] Registered led device: iwl-phy0:TX
[ 49.926124] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 79.685242] [drm] Initialized drm 1.1.0 20060810
[ 79.718053] pci 0000:00:02.0: power state changed by ACPI to D0
[ 79.718072] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 79.718081] pci 0000:00:02.0: setting latency timer to 64
[ 79.722908] pci 0000:00:02.0: irq 30 for MSI/MSI-X
[ 79.722949] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 80.547607] set status page addr 0x08da0000
[ 89.002680] iwlagn: Radio Frequency Kill Switch is On:
[ 89.002685] Kill switch must be turned off for wireless networking to work.
[ 181.850208] PM: Syncing filesystems ... done.
[ 182.747540] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 182.787762] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 182.788067] Suspending console(s) (use no_console_suspend to debug)
[ 182.804281] pci 0000:00:02.0: power state changed by ACPI to D3
[ 183.480541] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 183.481175] sd 0:0:0:0: [sda] Stopping disk
[ 183.846566] iwlagn 0000:03:00.0: PCI INT A disabled
[ 183.908387] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 183.908465] ehci_hcd 0000:00:1d.7: PME# disabled
[ 183.928506] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[ 183.928533] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 183.928603] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 183.928669] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 183.945156] HDA Intel 0000:00:1b.0: PCI INT B disabled
[ 183.960205] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[ 183.960280] ehci_hcd 0000:00:1a.7: PME# disabled
[ 183.979089] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[ 183.979115] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[ 183.979185] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 183.979251] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 184.035126] e1000e 0000:00:19.0: PME# enabled
[ 184.035159] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[ 184.035167] e1000e 0000:00:19.0: PME# enabled
[ 184.035171] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[ 184.035182] e1000e 0000:00:19.0: PCI INT A disabled
[ 184.053573] ACPI: Preparing to enter system sleep state S3
[ 184.074443] Disabling non-boot CPUs ...
[ 184.076724] CPU 1 is now offline
[ 184.076727] SMP alternatives: switching to UP code
[ 184.256332] CPU1 is down
[ 184.256438] Extended CMOS year: 2000
[ 184.256438] Back to C!
[ 184.256438] Extended CMOS year: 2000
[ 184.256438] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900003)
[ 184.256438] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[ 184.256438] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 184.256438] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[ 184.256438] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 184.256438] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 184.256438] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 184.256438] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 184.256438] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[ 184.256438] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
[ 184.256438] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 184.256438] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
[ 184.256438] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 184.256438] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 184.256438] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 184.256438] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 184.256438] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 184.256438] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 184.256438] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[ 184.256438] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[ 184.256438] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[ 184.256438] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[ 184.256438] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 184.256438] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 184.256438] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[ 184.256438] Enabling non-boot CPUs ...
[ 184.256438] SMP alternatives: switching to SMP code
[ 184.375186] Booting processor 1 APIC 0x1 ip 0x6000
[ 184.249860] Initializing CPU#1
[ 184.249860] Calibrating delay using timer specific routine.. 4522.01 BogoMIPS (lpj=9044028)
[ 184.249860] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 184.249860] CPU: L2 cache: 3072K
[ 184.249860] [ds] using Core 2/Atom configuration
[ 184.249860] CPU: Physical Processor ID: 0
[ 184.249860] CPU: Processor Core ID: 1
[ 184.249860] CPU1: Thermal monitoring enabled (TM2)
[ 184.464504] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[ 184.465011] Switched to high resolution mode on CPU 1
[ 184.476340] CPU1 is up
[ 184.476341] ACPI: Waking up from system sleep state S3
[ 184.518393] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 184.572157] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900403, writing 0x900003)
[ 184.575066] pci 0000:00:02.0: PME# disabled
[ 184.575070] pci 0000:00:02.1: PME# disabled
[ 184.575073] pci 0000:00:03.0: PME# disabled
[ 184.575128] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 184.575133] e1000e 0000:00:19.0: setting latency timer to 64
[ 184.575136] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 184.575140] e1000e 0000:00:19.0: PME# disabled
[ 184.575141] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 184.575145] e1000e 0000:00:19.0: PME# disabled
[ 184.575176] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 184.635715] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 184.635724] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 184.635731] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 184.635756] usb usb1: root hub lost power or was reset
[ 184.635776] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 184.635783] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 184.635805] usb usb2: root hub lost power or was reset
[ 184.636323] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 184.636328] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 184.636334] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 184.636357] usb usb3: root hub lost power or was reset
[ 184.636376] ehci_hcd 0000:00:1a.7: PME# disabled
[ 184.637014] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 184.637020] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 184.637027] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 184.637033] ehci_hcd 0000:00:1a.7: PME# disabled
[ 184.637052] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 184.637058] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 184.637077] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 184.637085] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 184.637092] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 184.637720] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 184.637725] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 184.637731] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 184.637754] usb usb4: root hub lost power or was reset
[ 184.637773] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 184.637779] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 184.637801] usb usb5: root hub lost power or was reset
[ 184.637818] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 184.637825] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 184.637846] usb usb6: root hub lost power or was reset
[ 184.637865] ehci_hcd 0000:00:1d.7: PME# disabled
[ 184.638336] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 184.638342] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 184.638349] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 184.638356] ehci_hcd 0000:00:1d.7: PME# disabled
[ 184.638375] pci 0000:00:1e.0: setting latency timer to 64
[ 184.638446] ahci 0000:00:1f.2: setting latency timer to 64
[ 184.638645] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 184.638795] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[ 184.638848] iwlagn: Radio disabled by HW RF Kill switch
[ 184.639171] sd 0:0:0:0: [sda] Starting disk
[ 184.956293] ata2: SATA link down (SStatus 0 SControl 300)
[ 186.300286] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 186.389782] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 186.389790] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 186.389974] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[ 186.389980] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 186.400868] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 186.400876] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 186.401060] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[ 186.401067] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 186.402182] ata1.00: configured for UDMA/100
[ 186.404506] ata1.00: configured for UDMA/100
[ 186.420272] ata1: EH complete
[ 186.420378] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 186.420415] sd 0:0:0:0: [sda] Write Protect is off
[ 186.420420] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 186.420472] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 186.420531] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 186.420562] sd 0:0:0:0: [sda] Write Protect is off
[ 186.420566] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 186.420616] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 187.816319] usb 7-6: reset high speed USB device using ehci_hcd and address 3
[ 188.064312] usb 8-6: reset high speed USB device using ehci_hcd and address 2
[ 188.320287] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[ 188.472795] pci 0000:00:02.0: power state changed by ACPI to D0
[ 188.472833] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900403, writing 0x900003)
[ 188.473001] pci 0000:00:02.0: power state changed by ACPI to D0
[ 188.473014] pci 0000:00:02.0: setting latency timer to 64
[ 188.488362] Restarting tasks ... done.
[ 189.592607] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
[ 189.904116] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 189.922992] input: TPPS/2 IBM TrackPoint as /class/input/input11
[ 272.887037] iwlagn 0000:03:00.0: PCI INT A disabled
[ 281.594321] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 281.594329] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[ 281.594478] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 281.594494] do_IRQ: 1.217 No irq handler for vector
[ 281.594500] iwlagn 0000:03:00.0: setting latency timer to 64
[ 281.594560] iwlagn: Detected Intel Wireless WiFi Link 5300AGN REV=0x24
[ 281.614192] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 281.616608] wmaster0 (iwlagn): not using net_device_ops yet
[ 281.617108] phy1: Selected rate control algorithm 'iwl-agn-rs'
[ 281.617125] wlan0 (iwlagn): not using net_device_ops yet
[ 281.631739] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 281.631886] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[ 281.631937] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode
[ 281.650386] iwlagn loaded firmware version 5.4.1.16
[ 281.808985] Registered led device: iwl-phy1:radio
[ 281.809809] Registered led device: iwl-phy1:assoc
[ 281.811717] Registered led device: iwl-phy1:RX
[ 281.811780] Registered led device: iwl-phy1:TX
[ 281.850142] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1039.525810] Monitor-Mwait will be used to enter C-3 state
[ 1039.527923] thinkpad_acpi: EC reports that Thermal Table has changed
[ 1140.333571] wlan0: direct probe to AP 00:14:6c:67:9c:32 try 1
[ 1140.336804] wlan0 direct probe responded
[ 1140.336810] wlan0: authenticate with AP 00:14:6c:67:9c:32
[ 1140.536070] wlan0: authenticate with AP 00:14:6c:67:9c:32
[ 1140.538142] wlan0: authenticated
[ 1140.538147] wlan0: associate with AP 00:14:6c:67:9c:32
[ 1140.545346] wlan0: RX AssocResp from 00:14:6c:67:9c:32 (capab=0x601 status=0 aid=5)
[ 1140.545352] wlan0: associated
[ 1140.550295] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1151.156100] wlan0: no IPv6 routers present
[ 1745.067786] PM: Syncing filesystems ... done.
[ 1746.017890] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 1746.076943] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 1746.077281] Suspending console(s) (use no_console_suspend to debug)
[ 1746.092126] pci 0000:00:02.0: power state changed by ACPI to D3
[ 1746.768362] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1746.768465] sd 0:0:0:0: [sda] Stopping disk
[ 1747.228192] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 1747.228268] ehci_hcd 0000:00:1d.7: PME# disabled
[ 1747.245012] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[ 1747.245029] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 1747.245096] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 1747.245162] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 1747.260744] HDA Intel 0000:00:1b.0: PCI INT B disabled
[ 1747.276124] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[ 1747.276199] ehci_hcd 0000:00:1a.7: PME# disabled
[ 1747.292990] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[ 1747.293006] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[ 1747.293074] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 1747.293139] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 1747.350925] e1000e 0000:00:19.0: PME# enabled
[ 1747.350943] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[ 1747.350951] e1000e 0000:00:19.0: PME# enabled
[ 1747.350955] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[ 1747.350965] e1000e 0000:00:19.0: PCI INT A disabled
[ 1747.369979] ACPI: Preparing to enter system sleep state S3
[ 1747.390693] Disabling non-boot CPUs ...
[ 1747.392974] CPU 1 is now offline
[ 1747.392978] SMP alternatives: switching to UP code
[ 1747.540412] CPU1 is down
[ 1747.540517] Extended CMOS year: 2000
[ 1747.540517] Back to C!
[ 1747.540517] Extended CMOS year: 2000
[ 1747.540517] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
[ 1747.540517] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[ 1747.540517] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 1747.540517] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[ 1747.540517] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 1747.540517] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 1747.540517] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 1747.540517] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 1747.540517] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[ 1747.540517] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 1747.540517] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 1747.540517] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 1747.540517] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 1747.540517] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 1747.540517] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[ 1747.540517] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 1747.540517] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[ 1747.540517] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[ 1747.540517] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[ 1747.540517] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[ 1747.540517] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 1747.540517] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 1747.540517] Enabling non-boot CPUs ...
[ 1747.540517] SMP alternatives: switching to SMP code
[ 1747.662706] Booting processor 1 APIC 0x1 ip 0x6000
[ 1747.532086] Initializing CPU#1
[ 1747.532086] Calibrating delay using timer specific routine.. 4522.01 BogoMIPS (lpj=9044022)
[ 1747.532086] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1747.532086] CPU: L2 cache: 3072K
[ 1747.532086] [ds] using Core 2/Atom configuration
[ 1747.532086] CPU: Physical Processor ID: 0
[ 1747.532086] CPU: Processor Core ID: 1
[ 1747.532086] CPU1: Thermal monitoring enabled (TM2)
[ 1747.752541] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[ 1747.756014] Switched to high resolution mode on CPU 1
[ 1747.764346] CPU1 is up
[ 1747.764348] ACPI: Waking up from system sleep state S3
[ 1747.807031] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 1747.857142] pci 0000:00:02.0: PME# disabled
[ 1747.857148] pci 0000:00:02.1: PME# disabled
[ 1747.857152] pci 0000:00:03.0: PME# disabled
[ 1747.857222] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1747.857228] e1000e 0000:00:19.0: setting latency timer to 64
[ 1747.857232] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 1747.857237] e1000e 0000:00:19.0: PME# disabled
[ 1747.857239] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 1747.857243] e1000e 0000:00:19.0: PME# disabled
[ 1747.857278] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 1747.912815] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 1747.912820] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1747.912827] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1747.912850] usb usb1: root hub lost power or was reset
[ 1747.912870] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1747.912876] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1747.912898] usb usb2: root hub lost power or was reset
[ 1747.913740] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 1747.913745] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1747.913751] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1747.913774] usb usb3: root hub lost power or was reset
[ 1747.913793] ehci_hcd 0000:00:1a.7: PME# disabled
[ 1747.914572] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 1747.914578] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1747.914585] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1747.914592] ehci_hcd 0000:00:1a.7: PME# disabled
[ 1747.914611] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1747.914617] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 1748.001232] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1748.001245] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1748.001263] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 1748.002001] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1748.002010] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1748.002020] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1748.002050] usb usb4: root hub lost power or was reset
[ 1748.002076] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1748.002086] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1748.002115] usb usb5: root hub lost power or was reset
[ 1748.002139] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1748.002149] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1748.002179] usb usb6: root hub lost power or was reset
[ 1748.002202] ehci_hcd 0000:00:1d.7: PME# disabled
[ 1748.002902] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1748.002913] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1748.002924] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1748.002935] ehci_hcd 0000:00:1d.7: PME# disabled
[ 1748.002964] pci 0000:00:1e.0: setting latency timer to 64
[ 1748.003068] ahci 0000:00:1f.2: setting latency timer to 64
[ 1748.003364] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1748.003548] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[ 1748.015331] sd 0:0:0:0: [sda] Starting disk
[ 1748.032690] Registered led device: iwl-phy1:radio
[ 1748.032736] Registered led device: iwl-phy1:assoc
[ 1748.032781] Registered led device: iwl-phy1:RX
[ 1748.032827] Registered led device: iwl-phy1:TX
[ 1748.324121] ata2: SATA link down (SStatus 0 SControl 300)
[ 1749.945131] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1750.017798] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 1750.017804] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 1750.017976] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[ 1750.017982] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1750.028883] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 1750.028889] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 1750.029074] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[ 1750.029080] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1750.029990] ata1.00: configured for UDMA/100
[ 1750.032094] ata1.00: configured for UDMA/100
[ 1750.048117] ata1: EH complete
[ 1750.048193] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 1750.048228] sd 0:0:0:0: [sda] Write Protect is off
[ 1750.048232] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1750.048283] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1750.048337] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 1750.048366] sd 0:0:0:0: [sda] Write Protect is off
[ 1750.048371] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1750.048419] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1751.444121] usb 7-6: reset high speed USB device using ehci_hcd and address 3
[ 1751.692120] usb 8-6: reset high speed USB device using ehci_hcd and address 2
[ 1751.948134] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[ 1752.100384] pci 0000:00:02.0: power state changed by ACPI to D0
[ 1752.100576] pci 0000:00:02.0: power state changed by ACPI to D0
[ 1752.100588] pci 0000:00:02.0: setting latency timer to 64
[ 1752.118429] Restarting tasks ... done.
[ 1753.196560] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
[ 1753.494082] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 1753.512155] input: TPPS/2 IBM TrackPoint as /class/input/input12
[ 1754.374816] wlan0: deauthenticated (Reason: 7)
[ 1754.389383] wlan0: direct probe to AP 00:14:6c:67:9c:32 try 1
[ 1754.589038] wlan0: direct probe to AP 00:14:6c:67:9c:32 try 2
[ 1754.591999] wlan0 direct probe responded
[ 1754.592001] wlan0: authenticate with AP 00:14:6c:67:9c:32
[ 1754.594020] wlan0: authenticated
[ 1754.594022] wlan0: associate with AP 00:14:6c:67:9c:32
[ 1754.793037] wlan0: associate with AP 00:14:6c:67:9c:32
[ 1754.801454] wlan0: RX ReassocResp from 00:14:6c:67:9c:32 (capab=0x201 status=0 aid=10)
[ 1754.801456] wlan0: associated
[15874.669834] PM: Syncing filesystems ... done.
[15875.683860] Freezing user space processes ... (elapsed 0.01 seconds) done.
[15875.701248] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[15875.701675] Suspending console(s) (use no_console_suspend to debug)
[15875.716268] pci 0000:00:02.0: power state changed by ACPI to D3
[15876.392209] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[15876.392526] sd 0:0:0:0: [sda] Stopping disk
[15876.816246] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[15876.816323] ehci_hcd 0000:00:1d.7: PME# disabled
[15876.833095] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[15876.833113] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[15876.833180] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[15876.833246] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[15876.848740] HDA Intel 0000:00:1b.0: PCI INT B disabled
[15876.864124] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[15876.864200] ehci_hcd 0000:00:1a.7: PME# disabled
[15876.881202] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[15876.881218] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[15876.881285] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[15876.881351] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[15876.938928] e1000e 0000:00:19.0: PME# enabled
[15876.938946] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[15876.938954] e1000e 0000:00:19.0: PME# enabled
[15876.938958] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[15876.938968] e1000e 0000:00:19.0: PCI INT A disabled
[15876.957830] ACPI: Preparing to enter system sleep state S3
[15876.978957] Disabling non-boot CPUs ...
[15876.981229] CPU 1 is now offline
[15876.981233] SMP alternatives: switching to UP code
[15877.144309] CPU1 is down
[15877.144414] Extended CMOS year: 2000
[15877.144414] Back to C!
[15877.144414] Extended CMOS year: 2000
[15877.144414] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
[15877.144414] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[15877.144414] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[15877.144414] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[15877.144414] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[15877.144414] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[15877.144414] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[15877.144414] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[15877.144414] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[15877.144414] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[15877.144414] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[15877.144414] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[15877.144414] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[15877.144414] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[15877.144414] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[15877.144414] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[15877.144414] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[15877.144414] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[15877.144414] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[15877.144414] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[15877.144414] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[15877.144414] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[15877.144414] Enabling non-boot CPUs ...
[15877.144414] SMP alternatives: switching to SMP code
[15877.264988] Booting processor 1 APIC 0x1 ip 0x6000
[15877.136789] Initializing CPU#1
[15877.136789] Calibrating delay using timer specific routine.. 4522.04 BogoMIPS (lpj=9044095)
[15877.136789] CPU: L1 I cache: 32K, L1 D cache: 32K
[15877.136789] CPU: L2 cache: 3072K
[15877.136789] [ds] using Core 2/Atom configuration
[15877.136789] CPU: Physical Processor ID: 0
[15877.136789] CPU: Processor Core ID: 1
[15877.136789] CPU1: Thermal monitoring enabled (TM2)
[15877.352541] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[15877.353011] Switched to high resolution mode on CPU 1
[15877.364345] CPU1 is up
[15877.364346] ACPI: Waking up from system sleep state S3
[15877.390681] thinkpad_acpi: EC reports that Thermal Table has changed
[15877.412400] ACPI: EC: non-query interrupt received, switching to interrupt mode
[15877.462809] pci 0000:00:02.0: PME# disabled
[15877.462815] pci 0000:00:02.1: PME# disabled
[15877.462819] pci 0000:00:03.0: PME# disabled
[15877.462882] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[15877.462888] e1000e 0000:00:19.0: setting latency timer to 64
[15877.462892] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[15877.462896] e1000e 0000:00:19.0: PME# disabled
[15877.462899] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[15877.462903] e1000e 0000:00:19.0: PME# disabled
[15877.462939] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[15877.521460] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[15877.521469] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[15877.521477] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[15877.521502] usb usb1: root hub lost power or was reset
[15877.521524] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[15877.521530] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[15877.521552] usb usb2: root hub lost power or was reset
[15877.522119] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[15877.522128] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[15877.522135] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[15877.522159] usb usb3: root hub lost power or was reset
[15877.522181] ehci_hcd 0000:00:1a.7: PME# disabled
[15877.522984] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[15877.522991] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[15877.522998] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[15877.523005] ehci_hcd 0000:00:1a.7: PME# disabled
[15877.523026] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[15877.523031] HDA Intel 0000:00:1b.0: setting latency timer to 64
[15877.523051] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[15877.523059] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[15877.523067] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[15877.523732] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[15877.523737] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[15877.523744] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[15877.523766] usb usb4: root hub lost power or was reset
[15877.523785] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[15877.523792] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[15877.523813] usb usb5: root hub lost power or was reset
[15877.523831] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[15877.523837] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[15877.523859] usb usb6: root hub lost power or was reset
[15877.523878] ehci_hcd 0000:00:1d.7: PME# disabled
[15877.524590] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[15877.524597] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[15877.524604] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[15877.524611] ehci_hcd 0000:00:1d.7: PME# disabled
[15877.524630] pci 0000:00:1e.0: setting latency timer to 64
[15877.524700] ahci 0000:00:1f.2: setting latency timer to 64
[15877.524896] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[15877.525045] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[15877.536616] sd 0:0:0:0: [sda] Starting disk
[15877.555369] Registered led device: iwl-phy1:radio
[15877.555415] Registered led device: iwl-phy1:assoc
[15877.555461] Registered led device: iwl-phy1:RX
[15877.555506] Registered led device: iwl-phy1:TX
[15877.844283] ata2: SATA link down (SStatus 0 SControl 300)
[15879.076274] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[15879.140330] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[15879.140337] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[15879.140641] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[15879.140648] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[15879.151606] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[15879.151613] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[15879.151926] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[15879.151932] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[15879.152816] ata1.00: configured for UDMA/100
[15879.155387] ata1.00: configured for UDMA/100
[15879.168270] ata1: EH complete
[15879.168374] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[15879.168410] sd 0:0:0:0: [sda] Write Protect is off
[15879.168415] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[15879.168467] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[15879.168527] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[15879.168557] sd 0:0:0:0: [sda] Write Protect is off
[15879.168561] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[15879.168611] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[15880.556292] usb 7-6: reset high speed USB device using ehci_hcd and address 3
[15880.804292] usb 8-6: reset high speed USB device using ehci_hcd and address 2
[15881.060314] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[15881.212795] pci 0000:00:02.0: power state changed by ACPI to D0
[15881.212992] pci 0000:00:02.0: power state changed by ACPI to D0
[15881.213005] pci 0000:00:02.0: setting latency timer to 64
[15881.230457] Restarting tasks ... done.
[15882.387782] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
[15882.685906] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[15882.702827] input: TPPS/2 IBM TrackPoint as /class/input/input13
[15883.231370] wlan0: No ProbeResp from current AP 00:14:6c:67:9c:32 - assume out of range
[17335.524527] wlan0: direct probe to AP 00:13:f7:53:df:e5 try 1
[17335.724306] wlan0: direct probe to AP 00:13:f7:53:df:e5 try 2
[17335.924303] wlan0: direct probe to AP 00:13:f7:53:df:e5 try 3
[17336.124085] wlan0: direct probe to AP 00:13:f7:53:df:e5 timed out
[17366.215242] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[17366.215438] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[17366.246913] Registered led device: iwl-phy1:radio
[17366.246971] Registered led device: iwl-phy1:assoc
[17366.247022] Registered led device: iwl-phy1:RX
[17366.247073] Registered led device: iwl-phy1:TX
[17366.276015] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[21229.431304] iwlagn: Radio Frequency Kill Switch is On:
[21229.431309] Kill switch must be turned off for wireless networking to work.
[21297.987392] PM: Syncing filesystems ... done.
[21298.818411] Freezing user space processes ... (elapsed 0.01 seconds) done.
[21298.837181] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[21298.842308] Suspending console(s) (use no_console_suspend to debug)
[21298.856139] pci 0000:00:02.0: power state changed by ACPI to D3
[21299.532357] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[21299.532633] sd 0:0:0:0: [sda] Stopping disk
[21299.964388] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[21299.964466] ehci_hcd 0000:00:1d.7: PME# disabled
[21299.982066] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[21299.982093] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[21299.982162] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[21299.982229] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[21299.982496] HDA Intel 0000:00:1b.0: PCI INT B disabled
[21299.996138] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[21299.996214] ehci_hcd 0000:00:1a.7: PME# disabled
[21300.013495] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[21300.013522] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[21300.013591] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[21300.013657] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[21300.071110] e1000e 0000:00:19.0: PME# enabled
[21300.071144] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[21300.071152] e1000e 0000:00:19.0: PME# enabled
[21300.071157] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[21300.071168] e1000e 0000:00:19.0: PCI INT A disabled
[21300.089338] ACPI: Preparing to enter system sleep state S3
[21300.110004] Disabling non-boot CPUs ...
[21300.112291] CPU 1 is now offline
[21300.112296] SMP alternatives: switching to UP code
[21300.276161] CPU1 is down
[21300.276268] Extended CMOS year: 2000
[21300.276268] Back to C!
[21300.276268] Extended CMOS year: 2000
[21300.276268] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
[21300.276268] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[21300.276268] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[21300.276268] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[21300.276268] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[21300.276268] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[21300.276268] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[21300.276268] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[21300.276268] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[21300.276268] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[21300.276268] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[21300.276268] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[21300.276268] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[21300.276268] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[21300.276268] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[21300.276268] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[21300.276268] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[21300.276268] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[21300.276268] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[21300.276268] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[21300.276268] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[21300.276268] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[21300.276268] Enabling non-boot CPUs ...
[21300.276268] SMP alternatives: switching to SMP code
[21300.397267] Booting processor 1 APIC 0x1 ip 0x6000
[21300.264540] Initializing CPU#1
[21300.264540] Calibrating delay using timer specific routine.. 4522.04 BogoMIPS (lpj=9044082)
[21300.264540] CPU: L1 I cache: 32K, L1 D cache: 32K
[21300.264540] CPU: L2 cache: 3072K
[21300.264540] [ds] using Core 2/Atom configuration
[21300.264540] CPU: Physical Processor ID: 0
[21300.264540] CPU: Processor Core ID: 1
[21300.264540] CPU1: Thermal monitoring enabled (TM2)
[21300.488522] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[21300.492015] Switched to high resolution mode on CPU 1
[21300.500334] CPU1 is up
[21300.500336] ACPI: Waking up from system sleep state S3
[21300.527194] thinkpad_acpi: EC reports that Thermal Table has changed
[21300.548295] ACPI: EC: non-query interrupt received, switching to interrupt mode
[21300.605874] pci 0000:00:02.0: PME# disabled
[21300.605880] pci 0000:00:02.1: PME# disabled
[21300.605884] pci 0000:00:03.0: PME# disabled
[21300.605947] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[21300.605953] e1000e 0000:00:19.0: setting latency timer to 64
[21300.605957] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[21300.605961] e1000e 0000:00:19.0: PME# disabled
[21300.605964] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[21300.605968] e1000e 0000:00:19.0: PME# disabled
[21300.606003] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[21300.665353] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[21300.665362] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[21300.665373] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[21300.665405] usb usb1: root hub lost power or was reset
[21300.665432] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[21300.665442] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[21300.665472] usb usb2: root hub lost power or was reset
[21300.666266] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[21300.666275] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[21300.666286] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[21300.666316] usb usb3: root hub lost power or was reset
[21300.666342] ehci_hcd 0000:00:1a.7: PME# disabled
[21300.667165] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[21300.667177] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[21300.667188] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[21300.667199] ehci_hcd 0000:00:1a.7: PME# disabled
[21300.667228] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[21300.667238] HDA Intel 0000:00:1b.0: setting latency timer to 64
[21300.667265] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[21300.667279] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[21300.667292] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[21300.668089] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[21300.668098] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[21300.668108] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[21300.668139] usb usb4: root hub lost power or was reset
[21300.668165] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[21300.668176] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[21300.668205] usb usb5: root hub lost power or was reset
[21300.668232] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[21300.668245] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[21300.668277] usb usb6: root hub lost power or was reset
[21300.668301] ehci_hcd 0000:00:1d.7: PME# disabled
[21300.668971] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[21300.668982] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[21300.668994] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[21300.669009] ehci_hcd 0000:00:1d.7: PME# disabled
[21300.669044] pci 0000:00:1e.0: setting latency timer to 64
[21300.669151] ahci 0000:00:1f.2: setting latency timer to 64
[21300.669447] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[21300.669631] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[21300.669699] iwlagn: Radio disabled by HW RF Kill switch
[21300.670297] sd 0:0:0:0: [sda] Starting disk
[21300.988131] ata2: SATA link down (SStatus 0 SControl 300)
[21302.780124] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[21302.826601] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[21302.826607] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[21302.826745] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[21302.826751] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[21302.837687] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[21302.837693] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[21302.837831] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[21302.837837] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[21302.838750] ata1.00: configured for UDMA/100
[21302.840863] ata1.00: configured for UDMA/100
[21302.856112] ata1: EH complete
[21302.856191] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[21302.856226] sd 0:0:0:0: [sda] Write Protect is off
[21302.856231] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[21302.856282] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[21302.856338] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[21302.856368] sd 0:0:0:0: [sda] Write Protect is off
[21302.856372] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[21302.856422] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[21304.240122] usb 7-6: reset high speed USB device using ehci_hcd and address 3
[21304.488123] usb 8-6: reset high speed USB device using ehci_hcd and address 2
[21304.744120] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[21304.895385] pci 0000:00:02.0: power state changed by ACPI to D0
[21304.895575] pci 0000:00:02.0: power state changed by ACPI to D0
[21304.895587] pci 0000:00:02.0: setting latency timer to 64
[21304.912282] Restarting tasks ... done.
[21306.032408] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
[21306.343910] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[21306.372019] input: TPPS/2 IBM TrackPoint as /class/input/input14
[21315.924801] Registered led device: iwl-phy1:radio
[21315.924854] Registered led device: iwl-phy1:assoc
[21315.924902] Registered led device: iwl-phy1:RX
[21315.924950] Registered led device: iwl-phy1:TX
[21322.700142] wlan0: direct probe to AP 00:14:6c:67:9c:32 try 1
[21322.703349] wlan0 direct probe responded
[21322.703355] wlan0: authenticate with AP 00:14:6c:67:9c:32
[21322.900142] wlan0: authenticate with AP 00:14:6c:67:9c:32
[21322.902208] wlan0: authenticated
[21322.902213] wlan0: associate with AP 00:14:6c:67:9c:32
[21322.909120] wlan0: RX AssocResp from 00:14:6c:67:9c:32 (capab=0x601 status=0 aid=11)
[21322.909126] wlan0: associated
[21322.914921] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[21333.392112] wlan0: no IPv6 routers present
[43604.112076] usb 8-2: new high speed USB device using ehci_hcd and address 3
[43604.246775] usb 8-2: configuration #1 chosen from 1 choice
[43604.247419] scsi5 : SCSI emulation for USB Mass Storage devices
[43604.249461] usb-storage: device found at 3
[43604.249465] usb-storage: waiting for device to settle before scanning
[43609.248978] scsi 5:0:0:0: Direct-Access TinyDisk 2007-02-13 0.00 PQ: 0 ANSI: 2
[43609.250936] sd 5:0:0:0: [sdc] 2031615 512-byte hardware sectors: (1.04 GB/991 MiB)
[43609.251433] sd 5:0:0:0: [sdc] Write Protect is off
[43609.251440] sd 5:0:0:0: [sdc] Mode Sense: 00 00 00 00
[43609.251445] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[43609.253937] sd 5:0:0:0: [sdc] 2031615 512-byte hardware sectors: (1.04 GB/991 MiB)
[43609.254408] sd 5:0:0:0: [sdc] Write Protect is off
[43609.254415] sd 5:0:0:0: [sdc] Mode Sense: 00 00 00 00
[43609.254421] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[43609.254429] sdc:
[43609.359812] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[43609.360515] usb-storage: device scan complete
[43609.484064] ------------[ cut here ]------------
[43609.484073] WARNING: at drivers/usb/storage/transport.c:584 last_sector_hacks+0x103/0x165 [usb_storage]()
[43609.484078] Hardware name: 7458AH8
[43609.484084] sdc: Successful last sector success at 2031614, device 1307:0163:0100
[43609.484088] Modules linked in: iwlagn i915 fb drm i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect rfcomm l2cap bluetooth uinput autofs4 cpufreq_powersave ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi fuse sha256_generic aes_x86_64 aes_generic cbc dm_crypt dm_mod md_mod loop usb_storage libusual snd_hda_codec_conexant arc4 snd_hda_intel ecb snd_hda_codec snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device iwlcore i2c_i801 snd mac80211 i2c_core video soundcore snd_page_alloc cfg80211 output ehci_hcd uhci_hcd rtc_cmos rtc_core rtc_lib wmi usbcore e1000e intel_agp thinkpad_acpi rfkill hwmon backlight led_class nvram [last unloaded: iwlagn]
[43609.484217] Pid: 18596, comm: usb-storage Not tainted 2.6.29-rc4-ikn-00001-gd5b5623 #9
[43609.484222] Call Trace:
[43609.484240] [<ffffffff8023568f>] warn_slowpath+0xd3/0x10f
[43609.484284] [<ffffffffa006aab4>] ? urb_destroy+0x23/0x28 [usbcore]
[43609.484294] [<ffffffff804c9b06>] ? wait_for_common+0x116/0x131
[43609.484303] [<ffffffff80231b4f>] ? default_wake_function+0x0/0xf
[43609.484323] [<ffffffffa01a610f>] ? usb_stor_bulk_transfer_buf+0x7c/0x85 [usb_storage]
[43609.484342] [<ffffffffa01a6754>] ? usb_stor_Bulk_transport+0x13b/0x267 [usb_storage]
[43609.484359] [<ffffffffa01a5b45>] last_sector_hacks+0x103/0x165 [usb_storage]
[43609.484376] [<ffffffffa01a64c2>] usb_stor_invoke_transport+0x299/0x2a6 [usb_storage]
[43609.484384] [<ffffffff804c9b06>] ? wait_for_common+0x116/0x131
[43609.484392] [<ffffffff80231b4f>] ? default_wake_function+0x0/0xf
[43609.484409] [<ffffffffa01a5971>] usb_stor_transparent_scsi_command+0x9/0xb [usb_storage]
[43609.484427] [<ffffffffa01a7993>] usb_stor_control_thread+0x12e/0x1d3 [usb_storage]
[43609.484444] [<ffffffffa01a7865>] ? usb_stor_control_thread+0x0/0x1d3 [usb_storage]
[43609.484454] [<ffffffff802489aa>] kthread+0x49/0x76
[43609.484463] [<ffffffff8020c5aa>] child_rip+0xa/0x20
[43609.484471] [<ffffffff80248961>] ? kthread+0x0/0x76
[43609.484477] [<ffffffff8020c5a0>] ? child_rip+0x0/0x20
[43609.484482] ---[ end trace 40c9516201ee044e ]---
[44097.830908] usb 8-2: USB disconnect, address 3
[45415.469990] PM: Syncing filesystems ... done.
[45416.421390] Freezing user space processes ... (elapsed 0.06 seconds) done.
[45416.483642] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[45416.484096] Suspending console(s) (use no_console_suspend to debug)
[45416.500257] pci 0000:00:02.0: power state changed by ACPI to D3
[45417.176411] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[45417.176515] sd 0:0:0:0: [sda] Stopping disk
[45417.632176] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[45417.632254] ehci_hcd 0000:00:1d.7: PME# disabled
[45417.648737] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[45417.648753] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[45417.648821] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[45417.648888] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[45417.664743] HDA Intel 0000:00:1b.0: PCI INT B disabled
[45417.680126] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[45417.680201] ehci_hcd 0000:00:1a.7: PME# disabled
[45417.697112] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[45417.697128] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[45417.697195] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[45417.697262] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[45417.754930] e1000e 0000:00:19.0: PME# enabled
[45417.754948] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[45417.754956] e1000e 0000:00:19.0: PME# enabled
[45417.754960] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[45417.754970] e1000e 0000:00:19.0: PCI INT A disabled
[45417.774037] ACPI: Preparing to enter system sleep state S3
[45417.795088] Disabling non-boot CPUs ...
[45417.797375] CPU 1 is now offline
[45417.797379] SMP alternatives: switching to UP code
[45417.956180] CPU1 is down
[45417.956286] Extended CMOS year: 2000
[45417.956286] Back to C!
[45417.956286] Extended CMOS year: 2000
[45417.956286] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
[45417.956286] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[45417.956286] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[45417.956286] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[45417.956286] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[45417.956286] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[45417.956286] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[45417.956286] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[45417.956286] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[45417.956286] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[45417.956286] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[45417.956286] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[45417.956286] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[45417.956286] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[45417.956286] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[45417.956286] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[45417.956286] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[45417.956286] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[45417.956286] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[45417.956286] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[45417.956286] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[45417.956286] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[45417.956286] Enabling non-boot CPUs ...
[45417.956286] SMP alternatives: switching to SMP code
[45418.077124] Booting processor 1 APIC 0x1 ip 0x6000
[45417.946347] Initializing CPU#1
[45417.946347] Calibrating delay using timer specific routine.. 4522.03 BogoMIPS (lpj=9044075)
[45417.946347] CPU: L1 I cache: 32K, L1 D cache: 32K
[45417.946347] CPU: L2 cache: 3072K
[45417.946347] [ds] using Core 2/Atom configuration
[45417.946347] CPU: Physical Processor ID: 0
[45417.946347] CPU: Processor Core ID: 1
[45417.946347] CPU1: Thermal monitoring enabled (TM2)
[45418.168523] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[45418.172014] Switched to high resolution mode on CPU 1
[45418.180339] CPU1 is up
[45418.180341] ACPI: Waking up from system sleep state S3
[45418.206753] thinkpad_acpi: EC reports that Thermal Table has changed
[45418.229080] ACPI: EC: non-query interrupt received, switching to interrupt mode
[45418.279457] pci 0000:00:02.0: PME# disabled
[45418.279463] pci 0000:00:02.1: PME# disabled
[45418.279467] pci 0000:00:03.0: PME# disabled
[45418.279530] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[45418.279535] e1000e 0000:00:19.0: setting latency timer to 64
[45418.279540] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[45418.279544] e1000e 0000:00:19.0: PME# disabled
[45418.279546] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[45418.279551] e1000e 0000:00:19.0: PME# disabled
[45418.279586] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[45418.336945] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[45418.336954] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[45418.336962] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[45418.336986] usb usb1: root hub lost power or was reset
[45418.337007] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[45418.337014] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[45418.337036] usb usb2: root hub lost power or was reset
[45418.337819] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[45418.337824] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[45418.337831] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[45418.337853] usb usb3: root hub lost power or was reset
[45418.337873] ehci_hcd 0000:00:1a.7: PME# disabled
[45418.338412] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[45418.338419] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[45418.338426] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[45418.338433] ehci_hcd 0000:00:1a.7: PME# disabled
[45418.338452] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[45418.338458] HDA Intel 0000:00:1b.0: setting latency timer to 64
[45418.425675] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[45418.425695] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[45418.425713] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[45418.426727] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[45418.426740] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[45418.426751] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[45418.426782] usb usb4: root hub lost power or was reset
[45418.426809] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[45418.426819] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[45418.426848] usb usb5: root hub lost power or was reset
[45418.426873] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[45418.426883] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[45418.426913] usb usb6: root hub lost power or was reset
[45418.426937] ehci_hcd 0000:00:1d.7: PME# disabled
[45418.427605] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[45418.427616] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[45418.427627] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[45418.427638] ehci_hcd 0000:00:1d.7: PME# disabled
[45418.427670] pci 0000:00:1e.0: setting latency timer to 64
[45418.427777] ahci 0000:00:1f.2: setting latency timer to 64
[45418.428100] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[45418.428288] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[45418.439027] sd 0:0:0:0: [sda] Starting disk
[45418.455338] Registered led device: iwl-phy1:radio
[45418.455387] Registered led device: iwl-phy1:assoc
[45418.455433] Registered led device: iwl-phy1:RX
[45418.455478] Registered led device: iwl-phy1:TX
[45418.744286] ata2: SATA link down (SStatus 0 SControl 300)
[45420.312280] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[45420.392090] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[45420.392097] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[45420.392211] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[45420.392217] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[45420.403153] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[45420.403161] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[45420.403476] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[45420.403483] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[45420.404422] ata1.00: configured for UDMA/100
[45420.406899] ata1.00: configured for UDMA/100
[45420.420262] ata1: EH complete
[45420.420368] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[45420.420405] sd 0:0:0:0: [sda] Write Protect is off
[45420.420410] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[45420.420463] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[45420.420523] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[45420.420554] sd 0:0:0:0: [sda] Write Protect is off
[45420.420559] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[45420.420609] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[45421.808312] usb 7-6: reset high speed USB device using ehci_hcd and address 3
[45422.056384] pm_op(): usb_dev_resume+0x0/0x10 [usbcore] returns -19
[45422.056391] PM: Device 8-6 failed to resume: error -19
[45422.168289] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[45422.319803] pci 0000:00:02.0: power state changed by ACPI to D0
[45422.319999] pci 0000:00:02.0: power state changed by ACPI to D0
[45422.320052] pci 0000:00:02.0: setting latency timer to 64
[45422.337647] Restarting tasks ... <6>usb 8-6: USB disconnect, address 2
[45422.407515] done.
[45423.475628] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
[45423.774879] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[45423.794892] input: TPPS/2 IBM TrackPoint as /class/input/input15
[45424.336277] wlan0: No ProbeResp from current AP 00:14:6c:67:9c:32 - assume out of range
[45429.736297] usb 8-6: new high speed USB device using ehci_hcd and address 4
[45429.879889] usb 8-6: configuration #1 chosen from 1 choice
[45429.894364] scsi6 : SCSI emulation for USB Mass Storage devices
[45429.904796] usb-storage: device found at 4
[45429.904802] usb-storage: waiting for device to settle before scanning
[45434.901508] scsi 6:0:0:0: Direct-Access RICOH R5U880FlashMedia 0000 PQ: 0 ANSI: 2
[45435.068891] sd 6:0:0:0: [sdb] 7741440 512-byte hardware sectors: (3.96 GB/3.69 GiB)
[45435.069510] sd 6:0:0:0: [sdb] Write Protect is off
[45435.069513] sd 6:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[45435.069515] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[45435.071121] sd 6:0:0:0: [sdb] 7741440 512-byte hardware sectors: (3.96 GB/3.69 GiB)
[45435.071741] sd 6:0:0:0: [sdb] Write Protect is off
[45435.071744] sd 6:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[45435.071747] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[45435.071751] sdb: sdb1
[45435.073838] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[45435.074407] usb-storage: device scan complete
[45663.759678] usb 8-6: USB disconnect, address 4
[45684.872293] usb 8-6: new high speed USB device using ehci_hcd and address 5
[45685.015702] usb 8-6: configuration #1 chosen from 1 choice
[45685.016245] scsi7 : SCSI emulation for USB Mass Storage devices
[45685.026560] usb-storage: device found at 5
[45685.026565] usb-storage: waiting for device to settle before scanning
[45690.026545] scsi 7:0:0:0: Direct-Access RICOH R5U880FlashMedia 0000 PQ: 0 ANSI: 2
[45690.221592] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[45690.222302] sd 7:0:0:0: [sdb] Write Protect is off
[45690.222310] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[45690.222315] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[45690.225056] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[45690.225670] sd 7:0:0:0: [sdb] Write Protect is off
[45690.225678] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[45690.225684] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[45690.225692] sdb: sdb1
[45690.230611] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[45690.231186] usb-storage: device scan complete
[46518.908347] PM: Syncing filesystems ... done.
[46519.724057] Freezing user space processes ... (elapsed 0.01 seconds) done.
[46519.741245] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[46519.745386] Suspending console(s) (use no_console_suspend to debug)
[46519.760279] pci 0000:00:02.0: power state changed by ACPI to D3
[46520.436440] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[46520.436633] sd 0:0:0:0: [sda] Stopping disk
[46520.864395] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[46520.864473] ehci_hcd 0000:00:1d.7: PME# disabled
[46520.881653] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[46520.881680] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[46520.881750] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[46520.881817] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[46520.896776] HDA Intel 0000:00:1b.0: PCI INT B disabled
[46520.912127] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[46520.912202] ehci_hcd 0000:00:1a.7: PME# disabled
[46520.929215] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[46520.929241] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[46520.929311] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[46520.929377] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[46520.987131] e1000e 0000:00:19.0: PME# enabled
[46520.987164] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[46520.987172] e1000e 0000:00:19.0: PME# enabled
[46520.987177] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[46520.987189] e1000e 0000:00:19.0: PCI INT A disabled
[46521.005445] ACPI: Preparing to enter system sleep state S3
[46521.025909] Disabling non-boot CPUs ...
[46521.028179] CPU 1 is now offline
[46521.028182] SMP alternatives: switching to UP code
[46521.216333] CPU1 is down
[46521.216439] Extended CMOS year: 2000
[46521.216439] Back to C!
[46521.216439] Extended CMOS year: 2000
[46521.216439] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
[46521.216439] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[46521.216439] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[46521.216439] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[46521.216439] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[46521.216439] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[46521.216439] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[46521.216439] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[46521.216439] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[46521.216439] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[46521.216439] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[46521.216439] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[46521.216439] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[46521.216439] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[46521.216439] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[46521.216439] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[46521.216439] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[46521.216439] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[46521.216439] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[46521.216439] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[46521.216439] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[46521.216439] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[46521.216439] Enabling non-boot CPUs ...
[46521.216439] SMP alternatives: switching to SMP code
[46521.337285] Booting processor 1 APIC 0x1 ip 0x6000
[46521.208801] Initializing CPU#1
[46521.208801] Calibrating delay using timer specific routine.. 4522.01 BogoMIPS (lpj=9044023)
[46521.208801] CPU: L1 I cache: 32K, L1 D cache: 32K
[46521.208801] CPU: L2 cache: 3072K
[46521.208801] [ds] using Core 2/Atom configuration
[46521.208801] CPU: Physical Processor ID: 0
[46521.208801] CPU: Processor Core ID: 1
[46521.208801] CPU1: Thermal monitoring enabled (TM2)
[46521.428485] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[46521.429011] Switched to high resolution mode on CPU 1
[46521.440344] CPU1 is up
[46521.440346] ACPI: Waking up from system sleep state S3
[46521.482615] ACPI: EC: non-query interrupt received, switching to interrupt mode
[46521.532396] pci 0000:00:02.0: PME# disabled
[46521.532400] pci 0000:00:02.1: PME# disabled
[46521.532403] pci 0000:00:03.0: PME# disabled
[46521.532459] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[46521.532463] e1000e 0000:00:19.0: setting latency timer to 64
[46521.532466] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[46521.532470] e1000e 0000:00:19.0: PME# disabled
[46521.532472] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[46521.532475] e1000e 0000:00:19.0: PME# disabled
[46521.532507] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[46521.588825] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[46521.588832] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[46521.588839] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[46521.588864] usb usb1: root hub lost power or was reset
[46521.588885] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[46521.588891] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[46521.588913] usb usb2: root hub lost power or was reset
[46521.589697] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[46521.589702] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[46521.589708] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[46521.589731] usb usb3: root hub lost power or was reset
[46521.589750] ehci_hcd 0000:00:1a.7: PME# disabled
[46521.590232] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[46521.590239] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[46521.590246] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[46521.590253] ehci_hcd 0000:00:1a.7: PME# disabled
[46521.590272] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[46521.590278] HDA Intel 0000:00:1b.0: setting latency timer to 64
[46521.677881] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[46521.677901] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[46521.677919] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[46521.678722] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[46521.678734] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[46521.678745] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[46521.678776] usb usb4: root hub lost power or was reset
[46521.678803] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[46521.678813] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[46521.678842] usb usb5: root hub lost power or was reset
[46521.678867] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[46521.678877] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[46521.678906] usb usb6: root hub lost power or was reset
[46521.678930] ehci_hcd 0000:00:1d.7: PME# disabled
[46521.679595] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[46521.679607] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[46521.679618] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[46521.679629] ehci_hcd 0000:00:1d.7: PME# disabled
[46521.679659] pci 0000:00:1e.0: setting latency timer to 64
[46521.679766] ahci 0000:00:1f.2: setting latency timer to 64
[46521.680088] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[46521.680277] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[46521.691440] sd 0:0:0:0: [sda] Starting disk
[46521.708992] Registered led device: iwl-phy1:radio
[46521.709054] Registered led device: iwl-phy1:assoc
[46521.709100] Registered led device: iwl-phy1:RX
[46521.709147] Registered led device: iwl-phy1:TX
[46521.997284] ata2: SATA link down (SStatus 0 SControl 300)
[46523.453277] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[46523.506373] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[46523.506381] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[46523.506697] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[46523.506703] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[46523.517461] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[46523.517468] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[46523.517783] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[46523.517790] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[46523.518845] ata1.00: configured for UDMA/100
[46523.520975] ata1.00: configured for UDMA/100
[46523.536304] ata1: EH complete
[46523.536402] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[46523.536438] sd 0:0:0:0: [sda] Write Protect is off
[46523.536442] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[46523.536494] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[46523.536553] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[46523.536584] sd 0:0:0:0: [sda] Write Protect is off
[46523.536588] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[46523.536639] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[46524.924311] usb 7-6: reset high speed USB device using ehci_hcd and address 3
[46525.172317] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[46525.324786] pci 0000:00:02.0: power state changed by ACPI to D0
[46525.324982] pci 0000:00:02.0: power state changed by ACPI to D0
[46525.324995] pci 0000:00:02.0: setting latency timer to 64
[46525.436286] usb 8-6: reset high speed USB device using ehci_hcd and address 5
[46525.597311] Restarting tasks ... done.
[46526.662106] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
[46526.834942] ready
[46526.836040] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[46526.837032] sd 7:0:0:0: [sdb] Write Protect is off
[46526.837040] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[46526.837045] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[46526.838387] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[46526.839009] sd 7:0:0:0: [sdb] Write Protect is off
[46526.839015] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[46526.839020] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[46526.839027] sdb: sdb1
[46526.987323] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[46527.007395] input: TPPS/2 IBM TrackPoint as /class/input/input16
[46531.600293] usb 8-1: new high speed USB device using ehci_hcd and address 6
[46531.747065] usb 8-1: configuration #1 chosen from 1 choice
[46531.812936] usb-storage: probe of 8-1:1.0 failed with error -5
[46531.813558] usb 8-1: USB disconnect, address 6
[46532.108317] usb 8-1: new high speed USB device using ehci_hcd and address 7
[46532.253875] usb 8-1: configuration #1 chosen from 1 choice
[46532.299011] scsi9 : SCSI emulation for USB Mass Storage devices
[46532.299474] usb-storage: device found at 7
[46532.299479] usb-storage: waiting for device to settle before scanning
[46532.630128] usbcore: registered new interface driver usbserial
[46532.630132] usbserial: USB Serial Driver core
[46532.672043] USB Serial support registered for Sierra USB modem
[46532.672115] sierra 8-1:1.0: Sierra USB modem converter detected
[46532.672699] usb 8-1: Sierra USB modem converter now attached to ttyUSB0
[46532.672729] sierra 8-1:1.1: Sierra USB modem converter detected
[46532.674793] usb 8-1: Sierra USB modem converter now attached to ttyUSB1
[46532.674823] sierra 8-1:1.2: Sierra USB modem converter detected
[46532.675269] usb 8-1: Sierra USB modem converter now attached to ttyUSB2
[46532.675295] sierra 8-1:1.3: Sierra USB modem converter detected
[46532.676175] usb 8-1: Sierra USB modem converter now attached to ttyUSB3
[46532.676204] sierra 8-1:1.4: Sierra USB modem converter detected
[46532.677171] usb 8-1: Sierra USB modem converter now attached to ttyUSB4
[46532.677202] sierra 8-1:1.5: Sierra USB modem converter detected
[46532.678185] usb 8-1: Sierra USB modem converter now attached to ttyUSB5
[46532.678215] sierra 8-1:1.6: Sierra USB modem converter detected
[46532.679157] usb 8-1: Sierra USB modem converter now attached to ttyUSB6
[46532.679200] usbcore: registered new interface driver sierra
[46532.679205] sierra: v.1.3.2:USB Driver for Sierra Wireless USB modems
[46537.302096] scsi 9:0:0:0: Direct-Access SWI SD Card 2.31 PQ: 0 ANSI: 2
[46537.308904] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[46537.311649] usb-storage: device scan complete
[46541.068891] PPP generic driver version 2.4.2
[46541.382750] PPP BSD Compression module registered
[46541.529475] PPP Deflate Compression module registered
[46655.617322] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[46655.617520] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[46655.644815] Registered led device: iwl-phy1:radio
[46655.644883] Registered led device: iwl-phy1:assoc
[46655.644933] Registered led device: iwl-phy1:RX
[46655.644984] Registered led device: iwl-phy1:TX
[46655.666316] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[46813.745632] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[46813.800378] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[46813.802269] ADDRCONF(NETDEV_UP): eth0: link is not ready
[46915.683704] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[46915.683904] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[46915.683981] iwlagn: Radio disabled by HW RF Kill switch
[46915.698302] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[47577.570082] usb 8-1: USB disconnect, address 7
[47577.571325] sierra ttyUSB0: Sierra USB modem converter now disconnected from ttyUSB0
[47577.571393] sierra 8-1:1.0: device disconnected
[47577.572829] sierra ttyUSB1: Sierra USB modem converter now disconnected from ttyUSB1
[47577.572879] sierra 8-1:1.1: device disconnected
[47577.573694] sierra ttyUSB2: Sierra USB modem converter now disconnected from ttyUSB2
[47577.573737] sierra 8-1:1.2: device disconnected
[47577.574141] sierra 8-1:1.3: device disconnected
[47577.574811] sierra ttyUSB4: Sierra USB modem converter now disconnected from ttyUSB4
[47577.575482] sierra 8-1:1.4: device disconnected
[47577.576355] sierra ttyUSB5: Sierra USB modem converter now disconnected from ttyUSB5
[47577.576398] sierra 8-1:1.5: device disconnected
[47577.577067] sierra ttyUSB6: Sierra USB modem converter now disconnected from ttyUSB6
[47577.577109] sierra 8-1:1.6: device disconnected
[47582.931477] sierra ttyUSB3: Sierra USB modem converter now disconnected from ttyUSB3
[47616.546721] PM: Syncing filesystems ... done.
[47617.363896] Freezing user space processes ... (elapsed 0.02 seconds) done.
[47617.385182] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[47617.385852] Suspending console(s) (use no_console_suspend to debug)
[47617.400180] pci 0000:00:02.0: power state changed by ACPI to D3
[47618.076542] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[47618.076879] sd 0:0:0:0: [sda] Stopping disk
[47618.492387] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[47618.492465] ehci_hcd 0000:00:1d.7: PME# disabled
[47618.509174] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[47618.509201] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[47618.509270] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[47618.509337] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[47618.524752] HDA Intel 0000:00:1b.0: PCI INT B disabled
[47618.540125] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[47618.540200] ehci_hcd 0000:00:1a.7: PME# disabled
[47618.557038] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[47618.557063] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[47618.557131] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[47618.557197] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[47618.615116] e1000e 0000:00:19.0: PME# enabled
[47618.615150] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[47618.615158] e1000e 0000:00:19.0: PME# enabled
[47618.615162] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[47618.615174] e1000e 0000:00:19.0: PCI INT A disabled
[47618.633750] ACPI: Preparing to enter system sleep state S3
[47618.655845] Disabling non-boot CPUs ...
[47618.658157] CPU 1 is now offline
[47618.658161] SMP alternatives: switching to UP code
[47618.832163] CPU1 is down
[47618.832269] Extended CMOS year: 2000
[47618.832269] Back to C!
[47618.832269] Extended CMOS year: 2000
[47618.832269] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
[47618.832269] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[47618.832269] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[47618.832269] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[47618.832269] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[47618.832269] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[47618.832269] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[47618.832269] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[47618.832269] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[47618.832269] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[47618.832269] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[47618.832269] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[47618.832269] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[47618.832269] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[47618.832269] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[47618.832269] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[47618.832269] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[47618.832269] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[47618.832269] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[47618.832269] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[47618.832269] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[47618.832269] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[47618.832269] Enabling non-boot CPUs ...
[47618.832269] SMP alternatives: switching to SMP code
[47618.955873] Booting processor 1 APIC 0x1 ip 0x6000
[47618.822996] Initializing CPU#1
[47618.822996] Calibrating delay using timer specific routine.. 4522.02 BogoMIPS (lpj=9044049)
[47618.822996] CPU: L1 I cache: 32K, L1 D cache: 32K
[47618.822996] CPU: L2 cache: 3072K
[47618.822996] [ds] using Core 2/Atom configuration
[47618.822996] CPU: Physical Processor ID: 0
[47618.822996] CPU: Processor Core ID: 1
[47618.822996] CPU1: Thermal monitoring enabled (TM2)
[47619.044552] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[47619.048015] Switched to high resolution mode on CPU 1
[47619.056353] CPU1 is up
[47619.056355] ACPI: Waking up from system sleep state S3
[47619.098418] ACPI: EC: non-query interrupt received, switching to interrupt mode
[47619.156354] pci 0000:00:02.0: PME# disabled
[47619.156359] pci 0000:00:02.1: PME# disabled
[47619.156363] pci 0000:00:03.0: PME# disabled
[47619.156427] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[47619.156432] e1000e 0000:00:19.0: setting latency timer to 64
[47619.156437] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[47619.156441] e1000e 0000:00:19.0: PME# disabled
[47619.156443] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[47619.156448] e1000e 0000:00:19.0: PME# disabled
[47619.156484] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[47619.212893] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[47619.212902] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[47619.212909] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[47619.212933] usb usb1: root hub lost power or was reset
[47619.212954] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[47619.212960] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[47619.212983] usb usb2: root hub lost power or was reset
[47619.213798] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[47619.213803] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[47619.213809] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[47619.213832] usb usb3: root hub lost power or was reset
[47619.213851] ehci_hcd 0000:00:1a.7: PME# disabled
[47619.214696] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[47619.214703] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[47619.214710] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[47619.214717] ehci_hcd 0000:00:1a.7: PME# disabled
[47619.214736] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[47619.214742] HDA Intel 0000:00:1b.0: setting latency timer to 64
[47619.302169] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[47619.302189] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[47619.302207] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[47619.303425] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[47619.303438] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[47619.303449] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[47619.303480] usb usb4: root hub lost power or was reset
[47619.303506] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[47619.303517] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[47619.303546] usb usb5: root hub lost power or was reset
[47619.303570] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[47619.303581] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[47619.303610] usb usb6: root hub lost power or was reset
[47619.303635] ehci_hcd 0000:00:1d.7: PME# disabled
[47619.304372] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[47619.304384] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[47619.304395] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[47619.304406] ehci_hcd 0000:00:1d.7: PME# disabled
[47619.304438] pci 0000:00:1e.0: setting latency timer to 64
[47619.304544] ahci 0000:00:1f.2: setting latency timer to 64
[47619.304841] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[47619.305029] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[47619.305103] iwlagn: Radio disabled by HW RF Kill switch
[47619.305700] sd 0:0:0:0: [sda] Starting disk
[47619.624289] ata2: SATA link down (SStatus 0 SControl 300)
[47621.136287] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[47621.202165] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[47621.202173] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[47621.202356] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[47621.202363] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[47621.213254] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[47621.213262] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[47621.213446] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[47621.213452] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[47621.214570] ata1.00: configured for UDMA/100
[47621.216854] ata1.00: configured for UDMA/100
[47621.232274] ata1: EH complete
[47621.232381] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[47621.232418] sd 0:0:0:0: [sda] Write Protect is off
[47621.232423] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[47621.232475] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[47621.232534] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[47621.232564] sd 0:0:0:0: [sda] Write Protect is off
[47621.232568] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[47621.232618] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[47622.628284] usb 7-6: reset high speed USB device using ehci_hcd and address 3
[47622.876282] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[47623.027794] pci 0000:00:02.0: power state changed by ACPI to D0
[47623.027990] pci 0000:00:02.0: power state changed by ACPI to D0
[47623.028043] pci 0000:00:02.0: setting latency timer to 64
[47623.140313] usb 8-6: reset high speed USB device using ehci_hcd and address 5
[47623.301031] Restarting tasks ... done.
[47624.402440] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
[47624.538108] ready
[47624.539098] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[47624.539889] sd 7:0:0:0: [sdb] Write Protect is off
[47624.539900] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[47624.539905] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[47624.541728] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[47624.542477] sd 7:0:0:0: [sdb] Write Protect is off
[47624.542483] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[47624.542488] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[47624.542495] sdb: sdb1
[47624.738799] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[47624.760184] input: TPPS/2 IBM TrackPoint as /class/input/input17
[55609.446540] PM: Syncing filesystems ... done.
[55610.256336] Freezing user space processes ... (elapsed 0.01 seconds) done.
[55610.273244] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[55610.280454] Suspending console(s) (use no_console_suspend to debug)
[55610.296296] pci 0000:00:02.0: power state changed by ACPI to D3
[55610.972555] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[55610.972873] sd 0:0:0:0: [sda] Stopping disk
[55611.388422] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[55611.388500] ehci_hcd 0000:00:1d.7: PME# disabled
[55611.405136] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[55611.405163] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[55611.405233] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[55611.405300] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[55611.420746] HDA Intel 0000:00:1b.0: PCI INT B disabled
[55611.436128] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[55611.436203] ehci_hcd 0000:00:1a.7: PME# disabled
[55611.453286] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[55611.453312] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[55611.453382] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[55611.453449] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[55611.511110] e1000e 0000:00:19.0: PME# enabled
[55611.511143] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[55611.511151] e1000e 0000:00:19.0: PME# enabled
[55611.511156] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[55611.511168] e1000e 0000:00:19.0: PCI INT A disabled
[55611.530243] ACPI: Preparing to enter system sleep state S3
[55611.551778] Disabling non-boot CPUs ...
[55611.554064] CPU 1 is now offline
[55611.554069] SMP alternatives: switching to UP code
[55611.720161] CPU1 is down
[55611.720267] Extended CMOS year: 2000
[55611.720267] Back to C!
[55611.720267] Extended CMOS year: 2000
[55611.720267] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
[55611.720267] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[55611.720267] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[55611.720267] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[55611.720267] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[55611.720267] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[55611.720267] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[55611.720267] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[55611.720267] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[55611.720267] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[55611.720267] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[55611.720267] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[55611.720267] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[55611.720267] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[55611.720267] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[55611.720267] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[55611.720267] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[55611.720267] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[55611.720267] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[55611.720267] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[55611.720267] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[55611.720267] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[55611.720267] Enabling non-boot CPUs ...
[55611.720267] SMP alternatives: switching to SMP code
[55611.844349] Booting processor 1 APIC 0x1 ip 0x6000
[55611.708219] Initializing CPU#1
[55611.708219] Calibrating delay using timer specific routine.. 4521.99 BogoMIPS (lpj=9043996)
[55611.708219] CPU: L1 I cache: 32K, L1 D cache: 32K
[55611.708219] CPU: L2 cache: 3072K
[55611.708219] [ds] using Core 2/Atom configuration
[55611.708219] CPU: Physical Processor ID: 0
[55611.708219] CPU: Processor Core ID: 1
[55611.708219] CPU1: Thermal monitoring enabled (TM2)
[55611.932492] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[55611.936015] Switched to high resolution mode on CPU 1
[55611.944337] CPU1 is up
[55611.944339] ACPI: Waking up from system sleep state S3
[55611.986307] ACPI: EC: non-query interrupt received, switching to interrupt mode
[55612.045026] pci 0000:00:02.0: PME# disabled
[55612.045032] pci 0000:00:02.1: PME# disabled
[55612.045038] pci 0000:00:03.0: PME# disabled
[55612.045104] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[55612.045109] e1000e 0000:00:19.0: setting latency timer to 64
[55612.045114] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[55612.045118] e1000e 0000:00:19.0: PME# disabled
[55612.045120] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[55612.045125] e1000e 0000:00:19.0: PME# disabled
[55612.045160] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[55612.101258] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[55612.101273] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[55612.101285] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[55612.101318] usb usb1: root hub lost power or was reset
[55612.101347] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[55612.101357] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[55612.101387] usb usb2: root hub lost power or was reset
[55612.102220] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[55612.102229] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[55612.102239] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[55612.102269] usb usb3: root hub lost power or was reset
[55612.102295] ehci_hcd 0000:00:1a.7: PME# disabled
[55612.102945] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[55612.102957] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[55612.102968] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[55612.102979] ehci_hcd 0000:00:1a.7: PME# disabled
[55612.103008] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[55612.103019] HDA Intel 0000:00:1b.0: setting latency timer to 64
[55612.190382] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[55612.190402] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[55612.190420] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[55612.191323] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[55612.191335] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[55612.191346] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[55612.191377] usb usb4: root hub lost power or was reset
[55612.191403] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[55612.191414] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[55612.191443] usb usb5: root hub lost power or was reset
[55612.191468] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[55612.191478] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[55612.191507] usb usb6: root hub lost power or was reset
[55612.191531] ehci_hcd 0000:00:1d.7: PME# disabled
[55612.192213] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[55612.192224] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[55612.192235] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[55612.192246] ehci_hcd 0000:00:1d.7: PME# disabled
[55612.192278] pci 0000:00:1e.0: setting latency timer to 64
[55612.192383] ahci 0000:00:1f.2: setting latency timer to 64
[55612.192680] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[55612.192870] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[55612.192943] iwlagn: Radio disabled by HW RF Kill switch
[55612.193540] sd 0:0:0:0: [sda] Starting disk
[55612.512281] ata2: SATA link down (SStatus 0 SControl 300)
[55614.248283] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[55614.350203] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[55614.350211] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[55614.350394] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[55614.350400] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[55614.361293] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[55614.361302] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[55614.361484] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[55614.361490] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[55614.362615] ata1.00: configured for UDMA/100
[55614.364897] ata1.00: configured for UDMA/100
[55614.380274] ata1: EH complete
[55614.380380] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[55614.380416] sd 0:0:0:0: [sda] Write Protect is off
[55614.380421] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[55614.380474] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[55614.380533] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[55614.380563] sd 0:0:0:0: [sda] Write Protect is off
[55614.380567] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[55614.380617] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[55615.764290] usb 7-6: reset high speed USB device using ehci_hcd and address 3
[55616.012301] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[55616.164786] pci 0000:00:02.0: power state changed by ACPI to D0
[55616.164983] pci 0000:00:02.0: power state changed by ACPI to D0
[55616.164996] pci 0000:00:02.0: setting latency timer to 64
[55616.276319] usb 8-6: reset high speed USB device using ehci_hcd and address 5
[55616.437019] Restarting tasks ... done.
[55617.537569] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
[55617.645144] ready
[55617.646132] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[55617.647136] sd 7:0:0:0: [sdb] Write Protect is off
[55617.647146] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[55617.647151] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[55617.649016] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[55617.649638] sd 7:0:0:0: [sdb] Write Protect is off
[55617.649644] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[55617.649648] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[55617.649657] sdb: sdb1
[55617.845748] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[55617.864057] input: TPPS/2 IBM TrackPoint as /class/input/input18
[55695.748207] PM: Syncing filesystems ... done.
[55696.500555] Freezing user space processes ... (elapsed 0.03 seconds) done.
[55696.533249] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[55696.533682] Suspending console(s) (use no_console_suspend to debug)
[55696.548297] pci 0000:00:02.0: power state changed by ACPI to D3
[55697.224539] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[55697.225178] sd 0:0:0:0: [sda] Stopping disk
[55697.644386] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[55697.644464] ehci_hcd 0000:00:1d.7: PME# disabled
[55697.661407] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[55697.661434] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[55697.661503] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[55697.661570] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[55697.676750] HDA Intel 0000:00:1b.0: PCI INT B disabled
[55697.692127] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[55697.692202] ehci_hcd 0000:00:1a.7: PME# disabled
[55697.709362] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[55697.709388] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[55697.709457] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[55697.709523] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[55697.767109] e1000e 0000:00:19.0: PME# enabled
[55697.767143] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[55697.767151] e1000e 0000:00:19.0: PME# enabled
[55697.767156] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[55697.767167] e1000e 0000:00:19.0: PCI INT A disabled
[55697.785523] ACPI: Preparing to enter system sleep state S3
[55697.805682] Disabling non-boot CPUs ...
[55697.908065] CPU 1 is now offline
[55697.908070] SMP alternatives: switching to UP code
[55698.048159] CPU1 is down
[55698.048265] Extended CMOS year: 2000
[55698.048265] Back to C!
[55698.048265] Extended CMOS year: 2000
[55698.048265] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
[55698.048265] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[55698.048265] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[55698.048265] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[55698.048265] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[55698.048265] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[55698.048265] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[55698.048265] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[55698.048265] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[55698.048265] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[55698.048265] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[55698.048265] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[55698.048265] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[55698.048265] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[55698.048265] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[55698.048265] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[55698.048265] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[55698.048265] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[55698.048265] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[55698.048265] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[55698.048265] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[55698.048265] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[55698.048265] Enabling non-boot CPUs ...
[55698.048265] SMP alternatives: switching to SMP code
[55698.172652] Booting processor 1 APIC 0x1 ip 0x6000
[55698.039695] Initializing CPU#1
[55698.039695] Calibrating delay using timer specific routine.. 4521.99 BogoMIPS (lpj=9043989)
[55698.039695] CPU: L1 I cache: 32K, L1 D cache: 32K
[55698.039695] CPU: L2 cache: 3072K
[55698.039695] [ds] using Core 2/Atom configuration
[55698.039695] CPU: Physical Processor ID: 0
[55698.039695] CPU: Processor Core ID: 1
[55698.039695] CPU1: Thermal monitoring enabled (TM2)
[55698.260535] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[55698.264015] Switched to high resolution mode on CPU 1
[55698.272342] CPU1 is up
[55698.272344] ACPI: Waking up from system sleep state S3
[55698.316831] ACPI: EC: non-query interrupt received, switching to interrupt mode
[55698.368509] pci 0000:00:02.0: PME# disabled
[55698.368515] pci 0000:00:02.1: PME# disabled
[55698.368518] pci 0000:00:03.0: PME# disabled
[55698.368582] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[55698.368588] e1000e 0000:00:19.0: setting latency timer to 64
[55698.368592] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[55698.368596] e1000e 0000:00:19.0: PME# disabled
[55698.368599] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[55698.368603] e1000e 0000:00:19.0: PME# disabled
[55698.368639] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[55698.425246] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[55698.425261] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[55698.425273] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[55698.425305] usb usb1: root hub lost power or was reset
[55698.425334] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[55698.425345] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[55698.425374] usb usb2: root hub lost power or was reset
[55698.426282] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[55698.426291] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[55698.426302] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[55698.426332] usb usb3: root hub lost power or was reset
[55698.426358] ehci_hcd 0000:00:1a.7: PME# disabled
[55698.427224] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[55698.427236] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[55698.427247] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[55698.427258] ehci_hcd 0000:00:1a.7: PME# disabled
[55698.427287] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[55698.427297] HDA Intel 0000:00:1b.0: setting latency timer to 64
[55698.514652] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[55698.514672] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[55698.514690] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[55698.515604] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[55698.515617] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[55698.515627] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[55698.515658] usb usb4: root hub lost power or was reset
[55698.515685] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[55698.515696] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[55698.515725] usb usb5: root hub lost power or was reset
[55698.515750] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[55698.515760] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[55698.515789] usb usb6: root hub lost power or was reset
[55698.515814] ehci_hcd 0000:00:1d.7: PME# disabled
[55698.516522] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[55698.516534] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[55698.516545] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[55698.516556] ehci_hcd 0000:00:1d.7: PME# disabled
[55698.516588] pci 0000:00:1e.0: setting latency timer to 64
[55698.516694] ahci 0000:00:1f.2: setting latency timer to 64
[55698.516992] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[55698.517180] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[55698.517254] iwlagn: Radio disabled by HW RF Kill switch
[55698.517851] sd 0:0:0:0: [sda] Starting disk
[55698.836289] ata2: SATA link down (SStatus 0 SControl 300)
[55700.292284] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[55700.340911] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[55700.340919] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[55700.341105] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[55700.341111] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[55700.351998] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[55700.352041] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[55700.352182] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[55700.352188] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[55700.353377] ata1.00: configured for UDMA/100
[55700.355881] ata1.00: configured for UDMA/100
[55700.368270] ata1: EH complete
[55700.368379] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[55700.368416] sd 0:0:0:0: [sda] Write Protect is off
[55700.368421] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[55700.368474] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[55700.368533] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[55700.368564] sd 0:0:0:0: [sda] Write Protect is off
[55700.368569] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[55700.368619] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[55701.768284] usb 7-6: reset high speed USB device using ehci_hcd and address 3
[55702.016316] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[55702.168785] pci 0000:00:02.0: power state changed by ACPI to D0
[55702.168981] pci 0000:00:02.0: power state changed by ACPI to D0
[55702.168994] pci 0000:00:02.0: setting latency timer to 64
[55702.280323] usb 8-6: reset high speed USB device using ehci_hcd and address 5
[55702.440905] Restarting tasks ... done.
[55703.533535] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
[55703.679250] ready
[55703.680027] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[55703.680746] sd 7:0:0:0: [sdb] Write Protect is off
[55703.680753] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[55703.680758] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[55703.682101] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[55703.682729] sd 7:0:0:0: [sdb] Write Protect is off
[55703.682735] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[55703.682740] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[55703.682747] sdb: sdb1
[55703.859041] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[55703.878165] input: TPPS/2 IBM TrackPoint as /class/input/input19
[55710.968285] usb 8-1: new high speed USB device using ehci_hcd and address 8
[55711.114779] usb 8-1: configuration #1 chosen from 1 choice
[55711.169582] usb-storage: probe of 8-1:1.0 failed with error -5
[55711.170033] usb 8-1: USB disconnect, address 8
[55711.444291] usb 8-1: new high speed USB device using ehci_hcd and address 9
[55711.589965] usb 8-1: configuration #1 chosen from 1 choice
[55711.633992] sierra 8-1:1.0: Sierra USB modem converter detected
[55711.635049] usb 8-1: Sierra USB modem converter now attached to ttyUSB0
[55711.635359] sierra 8-1:1.1: Sierra USB modem converter detected
[55711.635877] usb 8-1: Sierra USB modem converter now attached to ttyUSB1
[55711.636738] sierra 8-1:1.2: Sierra USB modem converter detected
[55711.637149] usb 8-1: Sierra USB modem converter now attached to ttyUSB2
[55711.637439] sierra 8-1:1.3: Sierra USB modem converter detected
[55711.638126] usb 8-1: Sierra USB modem converter now attached to ttyUSB3
[55711.638514] sierra 8-1:1.4: Sierra USB modem converter detected
[55711.639116] usb 8-1: Sierra USB modem converter now attached to ttyUSB4
[55711.639494] sierra 8-1:1.5: Sierra USB modem converter detected
[55711.640755] usb 8-1: Sierra USB modem converter now attached to ttyUSB5
[55711.641139] sierra 8-1:1.6: Sierra USB modem converter detected
[55711.641504] usb 8-1: Sierra USB modem converter now attached to ttyUSB6
[55711.668071] scsi11 : SCSI emulation for USB Mass Storage devices
[55711.698186] usb-storage: device found at 9
[55711.698192] usb-storage: waiting for device to settle before scanning
[55716.699781] scsi 11:0:0:0: Direct-Access SWI SD Card 2.31 PQ: 0 ANSI: 2
[55716.704693] sd 11:0:0:0: [sdc] Attached SCSI removable disk
[55716.705266] usb-storage: device scan complete
[57064.932555] usb 8-1: USB disconnect, address 9
[57064.943801] sierra ttyUSB0: Sierra USB modem converter now disconnected from ttyUSB0
[57064.943844] sierra 8-1:1.0: device disconnected
[57064.944744] sierra ttyUSB1: Sierra USB modem converter now disconnected from ttyUSB1
[57064.944784] sierra 8-1:1.1: device disconnected
[57064.945348] sierra ttyUSB2: Sierra USB modem converter now disconnected from ttyUSB2
[57064.945385] sierra 8-1:1.2: device disconnected
[57064.946043] sierra ttyUSB3: Sierra USB modem converter now disconnected from ttyUSB3
[57064.946082] sierra 8-1:1.3: device disconnected
[57064.946723] sierra ttyUSB4: Sierra USB modem converter now disconnected from ttyUSB4
[57064.946763] sierra 8-1:1.4: device disconnected
[57064.947409] sierra ttyUSB5: Sierra USB modem converter now disconnected from ttyUSB5
[57064.947448] sierra 8-1:1.5: device disconnected
[57064.948920] sierra ttyUSB6: Sierra USB modem converter now disconnected from ttyUSB6
[57064.948960] sierra 8-1:1.6: device disconnected
[57067.725840] PM: Syncing filesystems ... done.
[57068.813115] Freezing user space processes ... (elapsed 0.02 seconds) done.
[57068.837252] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[57068.837690] Suspending console(s) (use no_console_suspend to debug)
[57068.852291] pci 0000:00:02.0: power state changed by ACPI to D3
[57069.532621] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[57069.532909] sd 0:0:0:0: [sda] Stopping disk
[57069.948389] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[57069.948468] ehci_hcd 0000:00:1d.7: PME# disabled
[57069.965682] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[57069.965709] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[57069.965779] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[57069.965846] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[57069.980744] HDA Intel 0000:00:1b.0: PCI INT B disabled
[57069.996131] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[57069.996206] ehci_hcd 0000:00:1a.7: PME# disabled
[57070.012863] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[57070.012882] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[57070.012950] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[57070.013017] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[57070.071112] e1000e 0000:00:19.0: PME# enabled
[57070.071144] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[57070.071152] e1000e 0000:00:19.0: PME# enabled
[57070.071156] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[57070.071168] e1000e 0000:00:19.0: PCI INT A disabled
[57070.089239] ACPI: Preparing to enter system sleep state S3
[57070.110462] Disabling non-boot CPUs ...
[57070.112747] CPU 1 is now offline
[57070.112752] SMP alternatives: switching to UP code
[57070.280161] CPU1 is down
[57070.280267] Extended CMOS year: 2000
[57070.280267] Back to C!
[57070.280267] Extended CMOS year: 2000
[57070.280267] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
[57070.280267] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[57070.280267] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[57070.280267] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[57070.280267] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[57070.280267] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[57070.280267] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[57070.280267] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[57070.280267] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[57070.280267] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[57070.280267] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[57070.280267] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[57070.280267] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[57070.280267] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[57070.280267] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[57070.280267] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[57070.280267] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[57070.280267] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[57070.280267] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[57070.280267] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[57070.280267] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[57070.280267] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[57070.280267] Enabling non-boot CPUs ...
[57070.280267] SMP alternatives: switching to SMP code
[57070.404413] Booting processor 1 APIC 0x1 ip 0x6000
[57070.268346] Initializing CPU#1
[57070.268346] Calibrating delay using timer specific routine.. 4522.01 BogoMIPS (lpj=9044029)
[57070.268346] CPU: L1 I cache: 32K, L1 D cache: 32K
[57070.268346] CPU: L2 cache: 3072K
[57070.268346] [ds] using Core 2/Atom configuration
[57070.268346] CPU: Physical Processor ID: 0
[57070.268346] CPU: Processor Core ID: 1
[57070.268346] CPU1: Thermal monitoring enabled (TM2)
[57070.492492] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[57070.496013] Switched to high resolution mode on CPU 1
[57070.504336] CPU1 is up
[57070.504338] ACPI: Waking up from system sleep state S3
[57070.547117] ACPI: EC: non-query interrupt received, switching to interrupt mode
[57070.598219] pci 0000:00:02.0: PME# disabled
[57070.598224] pci 0000:00:02.1: PME# disabled
[57070.598228] pci 0000:00:03.0: PME# disabled
[57070.598291] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[57070.598297] e1000e 0000:00:19.0: setting latency timer to 64
[57070.598301] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[57070.598306] e1000e 0000:00:19.0: PME# disabled
[57070.598308] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[57070.598312] e1000e 0000:00:19.0: PME# disabled
[57070.598348] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[57070.657083] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[57070.657098] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[57070.657110] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[57070.657143] usb usb1: root hub lost power or was reset
[57070.657171] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[57070.657181] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[57070.657211] usb usb2: root hub lost power or was reset
[57070.658233] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[57070.658243] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[57070.658253] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[57070.658283] usb usb3: root hub lost power or was reset
[57070.658309] ehci_hcd 0000:00:1a.7: PME# disabled
[57070.659246] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[57070.659258] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[57070.659269] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[57070.659280] ehci_hcd 0000:00:1a.7: PME# disabled
[57070.659310] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[57070.659320] HDA Intel 0000:00:1b.0: setting latency timer to 64
[57070.746942] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[57070.746961] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[57070.746979] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[57070.747808] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[57070.747820] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[57070.747831] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[57070.747862] usb usb4: root hub lost power or was reset
[57070.747889] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[57070.747899] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[57070.747929] usb usb5: root hub lost power or was reset
[57070.747953] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[57070.747963] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[57070.747993] usb usb6: root hub lost power or was reset
[57070.748034] ehci_hcd 0000:00:1d.7: PME# disabled
[57070.748908] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[57070.748920] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[57070.748931] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[57070.748942] ehci_hcd 0000:00:1d.7: PME# disabled
[57070.748974] pci 0000:00:1e.0: setting latency timer to 64
[57070.749093] ahci 0000:00:1f.2: setting latency timer to 64
[57070.749388] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[57070.749577] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[57070.749650] iwlagn: Radio disabled by HW RF Kill switch
[57070.750247] sd 0:0:0:0: [sda] Starting disk
[57071.068287] ata2: SATA link down (SStatus 0 SControl 300)
[57072.692279] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[57072.782943] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[57072.782951] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[57072.783071] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[57072.783078] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[57072.794028] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[57072.794035] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[57072.794155] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[57072.794162] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[57072.795267] ata1.00: configured for UDMA/100
[57072.797892] ata1.00: configured for UDMA/100
[57072.812263] ata1: EH complete
[57072.812368] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[57072.812405] sd 0:0:0:0: [sda] Write Protect is off
[57072.812410] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[57072.812463] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[57072.812523] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[57072.812553] sd 0:0:0:0: [sda] Write Protect is off
[57072.812557] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[57072.812607] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[57074.196313] usb 7-6: reset high speed USB device using ehci_hcd and address 3
[57074.444316] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[57074.596805] pci 0000:00:02.0: power state changed by ACPI to D0
[57074.597002] pci 0000:00:02.0: power state changed by ACPI to D0
[57074.597015] pci 0000:00:02.0: setting latency timer to 64
[57074.708312] usb 8-6: reset high speed USB device using ehci_hcd and address 5
[57074.868887] Restarting tasks ... done.
[57076.019449] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
[57076.106945] ready
[57076.107926] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[57076.108753] sd 7:0:0:0: [sdb] Write Protect is off
[57076.108760] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[57076.108765] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[57076.110886] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[57076.111505] sd 7:0:0:0: [sdb] Write Protect is off
[57076.111511] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[57076.111516] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[57076.111523] sdb: sdb1
[57076.340329] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[57076.362031] input: TPPS/2 IBM TrackPoint as /class/input/input20
[58692.532150] PM: Syncing filesystems ... done.
[58693.344868] Freezing user space processes ... (elapsed 0.07 seconds) done.
[58693.417950] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[58693.418274] Suspending console(s) (use no_console_suspend to debug)
[58693.432176] pci 0000:00:02.0: power state changed by ACPI to D3
[58694.112593] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[58694.113280] sd 0:0:0:0: [sda] Stopping disk
[58694.536394] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[58694.536472] ehci_hcd 0000:00:1d.7: PME# disabled
[58694.553820] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[58694.553846] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[58694.553916] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[58694.553983] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[58694.568753] HDA Intel 0000:00:1b.0: PCI INT B disabled
[58694.584149] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[58694.584225] ehci_hcd 0000:00:1a.7: PME# disabled
[58694.600984] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[58694.601009] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[58694.601077] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[58694.601144] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[58694.659133] e1000e 0000:00:19.0: PME# enabled
[58694.659166] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[58694.659174] e1000e 0000:00:19.0: PME# enabled
[58694.659179] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[58694.659191] e1000e 0000:00:19.0: PCI INT A disabled
[58694.677748] ACPI: Preparing to enter system sleep state S3
[58694.698933] Disabling non-boot CPUs ...
[58694.701221] CPU 1 is now offline
[58694.701225] SMP alternatives: switching to UP code
[58694.900182] CPU1 is down
[58694.900289] Extended CMOS year: 2000
[58694.900289] Back to C!
[58694.900289] Extended CMOS year: 2000
[58694.900289] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
[58694.900289] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[58694.900289] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[58694.900289] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[58694.900289] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[58694.900289] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[58694.900289] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[58694.900289] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[58694.900289] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[58694.900289] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[58694.900289] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[58694.900289] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[58694.900289] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[58694.900289] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[58694.900289] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[58694.900289] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[58694.900289] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[58694.900289] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[58694.900289] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[58694.900289] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[58694.900289] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[58694.900289] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[58694.900289] Enabling non-boot CPUs ...
[58694.900289] SMP alternatives: switching to SMP code
[58695.023935] Booting processor 1 APIC 0x1 ip 0x6000
[58694.888903] Initializing CPU#1
[58694.888903] Calibrating delay using timer specific routine.. 4522.01 BogoMIPS (lpj=9044026)
[58694.888903] CPU: L1 I cache: 32K, L1 D cache: 32K
[58694.888903] CPU: L2 cache: 3072K
[58694.888903] [ds] using Core 2/Atom configuration
[58694.888903] CPU: Physical Processor ID: 0
[58694.888903] CPU: Processor Core ID: 1
[58694.888903] CPU1: Thermal monitoring enabled (TM2)
[58695.112551] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[58695.116014] Switched to high resolution mode on CPU 1
[58695.124344] CPU1 is up
[58695.124346] ACPI: Waking up from system sleep state S3
[58695.166164] ACPI: EC: non-query interrupt received, switching to interrupt mode
[58695.215372] pci 0000:00:02.0: PME# disabled
[58695.215377] pci 0000:00:02.1: PME# disabled
[58695.215380] pci 0000:00:03.0: PME# disabled
[58695.215435] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[58695.215439] e1000e 0000:00:19.0: setting latency timer to 64
[58695.215443] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[58695.215446] e1000e 0000:00:19.0: PME# disabled
[58695.215448] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[58695.215452] e1000e 0000:00:19.0: PME# disabled
[58695.215483] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[58695.272851] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[58695.272860] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[58695.272867] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[58695.272892] usb usb1: root hub lost power or was reset
[58695.272912] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[58695.272919] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[58695.272941] usb usb2: root hub lost power or was reset
[58695.273719] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[58695.273724] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[58695.273730] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[58695.273753] usb usb3: root hub lost power or was reset
[58695.273772] ehci_hcd 0000:00:1a.7: PME# disabled
[58695.274163] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[58695.274170] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[58695.274177] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[58695.274184] ehci_hcd 0000:00:1a.7: PME# disabled
[58695.274203] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[58695.274209] HDA Intel 0000:00:1b.0: setting latency timer to 64
[58695.363135] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[58695.363155] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[58695.363172] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[58695.364171] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[58695.364184] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[58695.364194] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[58695.364226] usb usb4: root hub lost power or was reset
[58695.364253] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[58695.364263] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[58695.364292] usb usb5: root hub lost power or was reset
[58695.364316] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[58695.364327] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[58695.364356] usb usb6: root hub lost power or was reset
[58695.364380] ehci_hcd 0000:00:1d.7: PME# disabled
[58695.365222] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[58695.365234] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[58695.365245] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[58695.365256] ehci_hcd 0000:00:1d.7: PME# disabled
[58695.365288] pci 0000:00:1e.0: setting latency timer to 64
[58695.365394] ahci 0000:00:1f.2: setting latency timer to 64
[58695.365690] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[58695.365879] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[58695.365952] iwlagn: Radio disabled by HW RF Kill switch
[58695.366548] sd 0:0:0:0: [sda] Starting disk
[58695.684283] ata2: SATA link down (SStatus 0 SControl 300)
[58697.588273] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[58697.659793] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[58697.659801] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[58697.659885] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[58697.659891] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[58697.670878] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[58697.670885] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[58697.671005] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[58697.671012] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[58697.672113] ata1.00: configured for UDMA/100
[58697.674536] ata1.00: configured for UDMA/100
[58697.688266] ata1: EH complete
[58697.688372] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[58697.688408] sd 0:0:0:0: [sda] Write Protect is off
[58697.688413] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[58697.688466] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[58697.688526] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[58697.688556] sd 0:0:0:0: [sda] Write Protect is off
[58697.688561] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[58697.688611] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[58699.084289] usb 7-6: reset high speed USB device using ehci_hcd and address 3
[58699.332316] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[58699.484782] pci 0000:00:02.0: power state changed by ACPI to D0
[58699.484979] pci 0000:00:02.0: power state changed by ACPI to D0
[58699.484992] pci 0000:00:02.0: setting latency timer to 64
[58699.596288] usb 8-6: reset high speed USB device using ehci_hcd and address 5
[58699.757051] Restarting tasks ... done.
[58700.862251] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
[58701.014948] ready
[58701.016040] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[58701.017254] sd 7:0:0:0: [sdb] Write Protect is off
[58701.017263] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[58701.017268] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[58701.018634] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[58701.019255] sd 7:0:0:0: [sdb] Write Protect is off
[58701.019261] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[58701.019267] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[58701.019274] sdb: sdb1
[58701.180915] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[58701.198362] input: TPPS/2 IBM TrackPoint as /class/input/input21
[59394.789766] PM: Syncing filesystems ... done.
[59395.817741] Freezing user space processes ... (elapsed 0.03 seconds) done.
[59395.849250] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[59395.849683] Suspending console(s) (use no_console_suspend to debug)
[59395.864482] pci 0000:00:02.0: power state changed by ACPI to D3
[59396.544391] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[59396.544911] sd 0:0:0:0: [sda] Stopping disk
[59396.964394] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[59396.964472] ehci_hcd 0000:00:1d.7: PME# disabled
[59396.981600] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[59396.981627] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[59396.981696] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[59396.981762] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[59396.996746] HDA Intel 0000:00:1b.0: PCI INT B disabled
[59397.012128] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[59397.012203] ehci_hcd 0000:00:1a.7: PME# disabled
[59397.028977] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[59397.029001] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[59397.029070] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[59397.029136] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[59397.087127] e1000e 0000:00:19.0: PME# enabled
[59397.087161] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[59397.087169] e1000e 0000:00:19.0: PME# enabled
[59397.087173] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[59397.087185] e1000e 0000:00:19.0: PCI INT A disabled
[59397.106200] ACPI: Preparing to enter system sleep state S3
[59397.128075] Disabling non-boot CPUs ...
[59397.232022] CPU 1 is now offline
[59397.232027] SMP alternatives: switching to UP code
[59397.444311] CPU1 is down
[59397.444419] Extended CMOS year: 2000
[59397.444419] Back to C!
[59397.444419] Extended CMOS year: 2000
[59397.444419] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
[59397.444419] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[59397.444419] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[59397.444419] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[59397.444419] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[59397.444419] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[59397.444419] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[59397.444419] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[59397.444419] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[59397.444419] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[59397.444419] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[59397.444419] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[59397.444419] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[59397.444419] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[59397.444419] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[59397.444419] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[59397.444419] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[59397.444419] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[59397.444419] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[59397.444419] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[59397.444419] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[59397.444419] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[59397.444419] Enabling non-boot CPUs ...
[59397.444419] SMP alternatives: switching to SMP code
[59397.567938] Booting processor 1 APIC 0x1 ip 0x6000
[59397.438229] Initializing CPU#1
[59397.438229] Calibrating delay using timer specific routine.. 4522.05 BogoMIPS (lpj=9044114)
[59397.438229] CPU: L1 I cache: 32K, L1 D cache: 32K
[59397.438229] CPU: L2 cache: 3072K
[59397.438229] [ds] using Core 2/Atom configuration
[59397.438229] CPU: Physical Processor ID: 0
[59397.438229] CPU: Processor Core ID: 1
[59397.438229] CPU1: Thermal monitoring enabled (TM2)
[59397.656572] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[59397.657011] Switched to high resolution mode on CPU 1
[59397.668342] CPU1 is up
[59397.668344] ACPI: Waking up from system sleep state S3
[59397.712128] ACPI: EC: non-query interrupt received, switching to interrupt mode
[59397.763073] pci 0000:00:02.0: PME# disabled
[59397.763077] pci 0000:00:02.1: PME# disabled
[59397.763080] pci 0000:00:03.0: PME# disabled
[59397.763136] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[59397.763140] e1000e 0000:00:19.0: setting latency timer to 64
[59397.763144] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[59397.763147] e1000e 0000:00:19.0: PME# disabled
[59397.763149] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[59397.763153] e1000e 0000:00:19.0: PME# disabled
[59397.763184] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[59397.821168] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[59397.821178] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[59397.821185] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[59397.821211] usb usb1: root hub lost power or was reset
[59397.821232] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[59397.821239] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[59397.821261] usb usb2: root hub lost power or was reset
[59397.822147] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[59397.822156] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[59397.822164] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[59397.822188] usb usb3: root hub lost power or was reset
[59397.822209] ehci_hcd 0000:00:1a.7: PME# disabled
[59397.822895] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[59397.822906] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[59397.822914] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[59397.822922] ehci_hcd 0000:00:1a.7: PME# disabled
[59397.822944] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[59397.822950] HDA Intel 0000:00:1b.0: setting latency timer to 64
[59397.911377] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[59397.911397] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[59397.911414] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[59397.912461] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[59397.912473] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[59397.912484] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[59397.912515] usb usb4: root hub lost power or was reset
[59397.912542] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[59397.912552] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[59397.912581] usb usb5: root hub lost power or was reset
[59397.912606] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[59397.912616] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[59397.912646] usb usb6: root hub lost power or was reset
[59397.912670] ehci_hcd 0000:00:1d.7: PME# disabled
[59397.913502] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[59397.913513] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[59397.913524] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[59397.913535] ehci_hcd 0000:00:1d.7: PME# disabled
[59397.913566] pci 0000:00:1e.0: setting latency timer to 64
[59397.913672] ahci 0000:00:1f.2: setting latency timer to 64
[59397.913969] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[59397.914159] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[59397.914232] iwlagn: Radio disabled by HW RF Kill switch
[59397.914829] sd 0:0:0:0: [sda] Starting disk
[59398.232293] ata2: SATA link down (SStatus 0 SControl 300)
[59399.744284] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[59399.816292] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[59399.816300] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[59399.816434] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[59399.816441] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[59399.827477] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[59399.827486] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[59399.827660] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[59399.827667] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[59399.828578] ata1.00: configured for UDMA/100
[59399.830647] ata1.00: configured for UDMA/100
[59399.844278] ata1: EH complete
[59399.844386] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[59399.844422] sd 0:0:0:0: [sda] Write Protect is off
[59399.844427] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[59399.844479] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[59399.844538] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[59399.844568] sd 0:0:0:0: [sda] Write Protect is off
[59399.844573] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[59399.844623] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[59401.232320] usb 7-6: reset high speed USB device using ehci_hcd and address 3
[59401.480316] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[59401.632819] pci 0000:00:02.0: power state changed by ACPI to D0
[59401.633016] pci 0000:00:02.0: power state changed by ACPI to D0
[59401.633029] pci 0000:00:02.0: setting latency timer to 64
[59401.744315] usb 8-6: reset high speed USB device using ehci_hcd and address 5
[59401.904887] Restarting tasks ... done.
[59403.028310] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
[59403.113264] ready
[59403.114255] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[59403.115197] sd 7:0:0:0: [sdb] Write Protect is off
[59403.115206] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[59403.115211] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[59403.117260] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[59403.117885] sd 7:0:0:0: [sdb] Write Protect is off
[59403.117891] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[59403.117896] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[59403.117904] sdb: sdb1
[59403.322945] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[59403.339944] input: TPPS/2 IBM TrackPoint as /class/input/input22
[59405.904985] Registered led device: iwl-phy1:radio
[59405.905234] Registered led device: iwl-phy1:assoc
[59405.905293] Registered led device: iwl-phy1:RX
[59405.905341] Registered led device: iwl-phy1:TX
[59411.742259] wlan0: direct probe to AP 00:14:6c:67:9c:32 try 1
[59411.745510] wlan0 direct probe responded
[59411.745519] wlan0: authenticate with AP 00:14:6c:67:9c:32
[59411.749503] wlan0: authenticated
[59411.749511] wlan0: associate with AP 00:14:6c:67:9c:32
[59411.758411] wlan0: RX AssocResp from 00:14:6c:67:9c:32 (capab=0x601 status=0 aid=14)
[59411.758420] wlan0: associated
[59411.761713] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[59422.540232] wlan0: no IPv6 routers present
[59892.543863] PM: Syncing filesystems ... done.
[59893.449995] Freezing user space processes ... (elapsed 0.07 seconds) done.
[59893.527416] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[59893.527857] Suspending console(s) (use no_console_suspend to debug)
[59893.544326] pci 0000:00:02.0: power state changed by ACPI to D3
[59894.220498] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[59894.221212] sd 0:0:0:0: [sda] Stopping disk
[59894.652396] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[59894.652474] ehci_hcd 0000:00:1d.7: PME# disabled
[59894.669499] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[59894.669525] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[59894.669594] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[59894.669661] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[59894.684760] HDA Intel 0000:00:1b.0: PCI INT B disabled
[59894.700130] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[59894.700206] ehci_hcd 0000:00:1a.7: PME# disabled
[59894.717392] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[59894.717419] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[59894.717488] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[59894.717555] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[59894.775128] e1000e 0000:00:19.0: PME# enabled
[59894.775162] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[59894.775170] e1000e 0000:00:19.0: PME# enabled
[59894.775175] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[59894.775186] e1000e 0000:00:19.0: PCI INT A disabled
[59894.793851] ACPI: Preparing to enter system sleep state S3
[59894.814827] Disabling non-boot CPUs ...
[59894.817143] CPU 1 is now offline
[59894.817148] SMP alternatives: switching to UP code
[59894.984327] CPU1 is down
[59894.984435] Extended CMOS year: 2000
[59894.984435] Back to C!
[59894.984435] Extended CMOS year: 2000
[59894.984435] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
[59894.984435] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[59894.984435] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[59894.984435] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[59894.984435] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[59894.984435] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[59894.984435] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[59894.984435] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[59894.984435] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[59894.984435] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[59894.984435] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[59894.984435] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[59894.984435] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[59894.984435] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[59894.984435] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[59894.984435] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[59894.984435] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[59894.984435] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[59894.984435] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[59894.984435] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[59894.984435] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[59894.984435] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[59894.984435] Enabling non-boot CPUs ...
[59894.984435] SMP alternatives: switching to SMP code
[59895.107205] Booting processor 1 APIC 0x1 ip 0x6000
[59894.982528] Initializing CPU#1
[59894.982528] Calibrating delay using timer specific routine.. 4522.12 BogoMIPS (lpj=9044248)
[59894.982528] CPU: L1 I cache: 32K, L1 D cache: 32K
[59894.982528] CPU: L2 cache: 3072K
[59894.982528] [ds] using Core 2/Atom configuration
[59894.982528] CPU: Physical Processor ID: 0
[59894.982528] CPU: Processor Core ID: 1
[59894.982528] CPU1: Thermal monitoring enabled (TM2)
[59895.196516] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[59895.200014] Switched to high resolution mode on CPU 1
[59895.208344] CPU1 is up
[59895.208346] ACPI: Waking up from system sleep state S3
[59895.252024] ACPI: EC: non-query interrupt received, switching to interrupt mode
[59895.303243] pci 0000:00:02.0: PME# disabled
[59895.303249] pci 0000:00:02.1: PME# disabled
[59895.303253] pci 0000:00:03.0: PME# disabled
[59895.303315] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[59895.303321] e1000e 0000:00:19.0: setting latency timer to 64
[59895.303325] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[59895.303330] e1000e 0000:00:19.0: PME# disabled
[59895.303332] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[59895.303336] e1000e 0000:00:19.0: PME# disabled
[59895.303372] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[59895.360872] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[59895.360881] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[59895.360888] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[59895.360913] usb usb1: root hub lost power or was reset
[59895.360933] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[59895.360940] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[59895.360962] usb usb2: root hub lost power or was reset
[59895.361716] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[59895.361721] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[59895.361728] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[59895.361750] usb usb3: root hub lost power or was reset
[59895.361769] ehci_hcd 0000:00:1a.7: PME# disabled
[59895.362550] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[59895.362557] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[59895.362564] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[59895.362571] ehci_hcd 0000:00:1a.7: PME# disabled
[59895.362590] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[59895.362596] HDA Intel 0000:00:1b.0: setting latency timer to 64
[59895.451606] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[59895.451625] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[59895.451643] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[59895.452514] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[59895.452527] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[59895.452537] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[59895.452568] usb usb4: root hub lost power or was reset
[59895.452595] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[59895.452605] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[59895.452634] usb usb5: root hub lost power or was reset
[59895.452659] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[59895.452669] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[59895.452698] usb usb6: root hub lost power or was reset
[59895.452722] ehci_hcd 0000:00:1d.7: PME# disabled
[59895.453411] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[59895.453422] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[59895.453433] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[59895.453444] ehci_hcd 0000:00:1d.7: PME# disabled
[59895.453475] pci 0000:00:1e.0: setting latency timer to 64
[59895.453581] ahci 0000:00:1f.2: setting latency timer to 64
[59895.453878] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[59895.454067] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[59895.467243] sd 0:0:0:0: [sda] Starting disk
[59895.483339] Registered led device: iwl-phy1:radio
[59895.483386] Registered led device: iwl-phy1:assoc
[59895.483431] Registered led device: iwl-phy1:RX
[59895.483477] Registered led device: iwl-phy1:TX
[59895.772272] ata2: SATA link down (SStatus 0 SControl 300)
[59897.452279] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[59897.498115] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[59897.498122] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[59897.498436] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[59897.498443] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[59897.509210] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[59897.509217] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[59897.509525] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[59897.509533] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[59897.510584] ata1.00: configured for UDMA/100
[59897.512761] ata1.00: configured for UDMA/100
[59897.528272] ata1: EH complete
[59897.528376] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[59897.528412] sd 0:0:0:0: [sda] Write Protect is off
[59897.528417] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[59897.528470] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[59897.528529] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[59897.528559] sd 0:0:0:0: [sda] Write Protect is off
[59897.528564] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[59897.528614] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[59898.912321] usb 7-6: reset high speed USB device using ehci_hcd and address 3
[59899.160316] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[59899.312811] pci 0000:00:02.0: power state changed by ACPI to D0
[59899.313007] pci 0000:00:02.0: power state changed by ACPI to D0
[59899.313020] pci 0000:00:02.0: setting latency timer to 64
[59899.424323] usb 8-6: reset high speed USB device using ehci_hcd and address 5
[59899.585290] Restarting tasks ... done.
[59900.662508] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
[59900.843090] ready
[59900.843918] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[59900.844898] sd 7:0:0:0: [sdb] Write Protect is off
[59900.844905] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[59900.844910] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[59900.846259] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[59900.846883] sd 7:0:0:0: [sdb] Write Protect is off
[59900.846889] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[59900.846894] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[59900.846912] sdb: sdb1
[59900.974105] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[59900.995158] input: TPPS/2 IBM TrackPoint as /class/input/input23
[59901.584016] wlan0: No ProbeResp from current AP 00:14:6c:67:9c:32 - assume out of range
[61075.077222] PM: Syncing filesystems ... done.
[61075.893015] Freezing user space processes ... (elapsed 0.06 seconds) done.
[61075.956727] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[61075.957173] Suspending console(s) (use no_console_suspend to debug)
[61075.972291] pci 0000:00:02.0: power state changed by ACPI to D3
[61076.648613] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[61076.649135] sd 0:0:0:0: [sda] Stopping disk
[61077.076391] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[61077.076469] ehci_hcd 0000:00:1d.7: PME# disabled
[61077.093407] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[61077.093434] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[61077.093503] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[61077.093570] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[61077.108761] HDA Intel 0000:00:1b.0: PCI INT B disabled
[61077.124123] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[61077.124197] ehci_hcd 0000:00:1a.7: PME# disabled
[61077.141058] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[61077.141082] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[61077.141150] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[61077.141217] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[61077.199120] e1000e 0000:00:19.0: PME# enabled
[61077.199155] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[61077.199162] e1000e 0000:00:19.0: PME# enabled
[61077.199167] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[61077.199178] e1000e 0000:00:19.0: PCI INT A disabled
[61077.217973] ACPI: Preparing to enter system sleep state S3
[61077.238720] Disabling non-boot CPUs ...
[61077.241006] CPU 1 is now offline
[61077.241011] SMP alternatives: switching to UP code
[61077.400161] CPU1 is down
[61077.400267] Extended CMOS year: 2000
[61077.400267] Back to C!
[61077.400267] Extended CMOS year: 2000
[61077.400267] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
[61077.400267] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[61077.400267] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[61077.400267] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[61077.400267] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[61077.400267] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[61077.400267] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[61077.400267] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[61077.400267] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[61077.400267] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[61077.400267] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[61077.400267] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[61077.400267] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[61077.400267] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[61077.400267] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[61077.400267] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[61077.400267] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[61077.400267] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[61077.400267] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[61077.400267] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[61077.400267] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[61077.400267] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[61077.400267] Enabling non-boot CPUs ...
[61077.400267] SMP alternatives: switching to SMP code
[61077.523950] Booting processor 1 APIC 0x1 ip 0x6000
[61077.390129] Initializing CPU#1
[61077.390129] Calibrating delay using timer specific routine.. 4522.06 BogoMIPS (lpj=9044124)
[61077.390129] CPU: L1 I cache: 32K, L1 D cache: 32K
[61077.390129] CPU: L2 cache: 3072K
[61077.390129] [ds] using Core 2/Atom configuration
[61077.390129] CPU: Physical Processor ID: 0
[61077.390129] CPU: Processor Core ID: 1
[61077.390129] CPU1: Thermal monitoring enabled (TM2)
[61077.612505] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[61077.616015] Switched to high resolution mode on CPU 1
[61077.624341] CPU1 is up
[61077.624342] ACPI: Waking up from system sleep state S3
[61077.666757] ACPI: EC: non-query interrupt received, switching to interrupt mode
[61077.717361] pci 0000:00:02.0: PME# disabled
[61077.717367] pci 0000:00:02.1: PME# disabled
[61077.717373] pci 0000:00:03.0: PME# disabled
[61077.717436] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[61077.717442] e1000e 0000:00:19.0: setting latency timer to 64
[61077.717446] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[61077.717451] e1000e 0000:00:19.0: PME# disabled
[61077.717453] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[61077.717457] e1000e 0000:00:19.0: PME# disabled
[61077.717492] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[61077.772802] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[61077.772811] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[61077.772818] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[61077.772842] usb usb1: root hub lost power or was reset
[61077.772863] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[61077.772869] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[61077.772891] usb usb2: root hub lost power or was reset
[61077.773785] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[61077.773790] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[61077.773796] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[61077.773818] usb usb3: root hub lost power or was reset
[61077.773838] ehci_hcd 0000:00:1a.7: PME# disabled
[61077.774600] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[61077.774607] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[61077.774614] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[61077.774622] ehci_hcd 0000:00:1a.7: PME# disabled
[61077.774642] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[61077.774648] HDA Intel 0000:00:1b.0: setting latency timer to 64
[61077.863889] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[61077.863909] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[61077.863926] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[61077.864813] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[61077.864826] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[61077.864836] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[61077.864867] usb usb4: root hub lost power or was reset
[61077.864894] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[61077.864905] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[61077.864934] usb usb5: root hub lost power or was reset
[61077.864958] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[61077.864968] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[61077.864997] usb usb6: root hub lost power or was reset
[61077.865027] ehci_hcd 0000:00:1d.7: PME# disabled
[61077.865969] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[61077.865980] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[61077.865991] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[61077.866002] ehci_hcd 0000:00:1d.7: PME# disabled
[61077.866035] pci 0000:00:1e.0: setting latency timer to 64
[61077.866142] ahci 0000:00:1f.2: setting latency timer to 64
[61077.866438] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[61077.866628] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[61077.877949] sd 0:0:0:0: [sda] Starting disk
[61077.895883] Registered led device: iwl-phy1:radio
[61077.895929] Registered led device: iwl-phy1:assoc
[61077.895975] Registered led device: iwl-phy1:RX
[61077.896021] Registered led device: iwl-phy1:TX
[61078.184287] ata2: SATA link down (SStatus 0 SControl 300)
[61079.528273] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[61079.588209] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[61079.588217] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[61079.588330] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[61079.588337] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[61079.599262] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[61079.599269] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[61079.599585] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[61079.599592] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[61079.600433] ata1.00: configured for UDMA/100
[61079.602908] ata1.00: configured for UDMA/100
[61079.616297] ata1: EH complete
[61079.616398] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[61079.616434] sd 0:0:0:0: [sda] Write Protect is off
[61079.616439] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[61079.616491] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[61079.616550] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[61079.616580] sd 0:0:0:0: [sda] Write Protect is off
[61079.616585] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[61079.616635] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[61081.004321] usb 7-6: reset high speed USB device using ehci_hcd and address 3
[61081.252320] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[61081.404782] pci 0000:00:02.0: power state changed by ACPI to D0
[61081.404978] pci 0000:00:02.0: power state changed by ACPI to D0
[61081.404991] pci 0000:00:02.0: setting latency timer to 64
[61081.516293] usb 8-6: reset high speed USB device using ehci_hcd and address 5
[61081.677328] Restarting tasks ... done.
[61082.809688] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
[61082.885157] ready
[61082.886271] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[61082.887036] sd 7:0:0:0: [sdb] Write Protect is off
[61082.887046] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[61082.887051] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[61082.888643] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[61082.889503] sd 7:0:0:0: [sdb] Write Protect is off
[61082.889510] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[61082.889515] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[61082.889522] sdb: sdb1
[61083.119301] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[61083.138394] input: TPPS/2 IBM TrackPoint as /class/input/input24
[61116.752319] usb 8-1: new high speed USB device using ehci_hcd and address 10
[61116.898850] usb 8-1: configuration #1 chosen from 1 choice
[61116.953498] usb-storage: probe of 8-1:1.0 failed with error -5
[61116.953951] usb 8-1: USB disconnect, address 10
[61117.224110] usb 8-1: new high speed USB device using ehci_hcd and address 11
[61117.369898] usb 8-1: configuration #1 chosen from 1 choice
[61117.413775] sierra 8-1:1.0: Sierra USB modem converter detected
[61117.414977] usb 8-1: Sierra USB modem converter now attached to ttyUSB0
[61117.415300] sierra 8-1:1.1: Sierra USB modem converter detected
[61117.417267] usb 8-1: Sierra USB modem converter now attached to ttyUSB1
[61117.417573] sierra 8-1:1.2: Sierra USB modem converter detected
[61117.420693] usb 8-1: Sierra USB modem converter now attached to ttyUSB2
[61117.420999] sierra 8-1:1.3: Sierra USB modem converter detected
[61117.421412] usb 8-1: Sierra USB modem converter now attached to ttyUSB3
[61117.421781] sierra 8-1:1.4: Sierra USB modem converter detected
[61117.422407] usb 8-1: Sierra USB modem converter now attached to ttyUSB4
[61117.422774] sierra 8-1:1.5: Sierra USB modem converter detected
[61117.423402] usb 8-1: Sierra USB modem converter now attached to ttyUSB5
[61117.423775] sierra 8-1:1.6: Sierra USB modem converter detected
[61117.424873] usb 8-1: Sierra USB modem converter now attached to ttyUSB6
[61117.428279] scsi13 : SCSI emulation for USB Mass Storage devices
[61117.456558] usb-storage: device found at 11
[61117.456564] usb-storage: waiting for device to settle before scanning
[61122.459826] scsi 13:0:0:0: Direct-Access SWI SD Card 2.31 PQ: 0 ANSI: 2
[61122.464743] sd 13:0:0:0: [sdc] Attached SCSI removable disk
[61122.465318] usb-storage: device scan complete
[61201.683664] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[61201.683863] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[61202.208268] iwlagn: Error sending REPLY_ADD_STA: time out after 500ms.
[61202.208470] Registered led device: iwl-phy1:radio
[61202.208523] Registered led device: iwl-phy1:assoc
[61202.208574] Registered led device: iwl-phy1:RX
[61202.208624] Registered led device: iwl-phy1:TX
[61202.227284] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[62506.394832] usb 8-1: USB disconnect, address 11
[62506.398955] sierra ttyUSB0: Sierra USB modem converter now disconnected from ttyUSB0
[62506.399000] sierra 8-1:1.0: device disconnected
[62506.399554] sierra ttyUSB1: Sierra USB modem converter now disconnected from ttyUSB1
[62506.399591] sierra 8-1:1.1: device disconnected
[62506.400181] sierra ttyUSB2: Sierra USB modem converter now disconnected from ttyUSB2
[62506.400221] sierra 8-1:1.2: device disconnected
[62506.400874] sierra ttyUSB3: Sierra USB modem converter now disconnected from ttyUSB3
[62506.400912] sierra 8-1:1.3: device disconnected
[62506.401558] sierra ttyUSB4: Sierra USB modem converter now disconnected from ttyUSB4
[62506.401595] sierra 8-1:1.4: device disconnected
[62506.402230] sierra ttyUSB5: Sierra USB modem converter now disconnected from ttyUSB5
[62506.402268] sierra 8-1:1.5: device disconnected
[62506.402907] sierra ttyUSB6: Sierra USB modem converter now disconnected from ttyUSB6
[62506.402944] sierra 8-1:1.6: device disconnected
[62591.876910] PM: Syncing filesystems ... done.
[62592.689634] Freezing user space processes ... (elapsed 0.06 seconds) done.
[62592.751886] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[62592.752348] Suspending console(s) (use no_console_suspend to debug)
[62592.768301] pci 0000:00:02.0: power state changed by ACPI to D3
[62593.440721] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[62593.440979] sd 0:0:0:0: [sda] Stopping disk
[62593.876391] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[62593.876470] ehci_hcd 0000:00:1d.7: PME# disabled
[62593.893089] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[62593.893116] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[62593.893185] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[62593.893252] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[62593.908756] HDA Intel 0000:00:1b.0: PCI INT B disabled
[62593.924127] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[62593.924202] ehci_hcd 0000:00:1a.7: PME# disabled
[62593.941346] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[62593.941372] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[62593.941442] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[62593.941509] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[62593.999121] e1000e 0000:00:19.0: PME# enabled
[62593.999154] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[62593.999162] e1000e 0000:00:19.0: PME# enabled
[62593.999167] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[62593.999178] e1000e 0000:00:19.0: PCI INT A disabled
[62594.018073] ACPI: Preparing to enter system sleep state S3
[62594.040041] Disabling non-boot CPUs ...
[62594.144071] CPU 1 is now offline
[62594.144077] SMP alternatives: switching to UP code
[62594.296158] CPU1 is down
[62594.296264] Extended CMOS year: 2000
[62594.296264] Back to C!
[62594.296264] Extended CMOS year: 2000
[62594.296264] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
[62594.296264] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[62594.296264] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[62594.296264] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[62594.296264] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[62594.296264] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[62594.296264] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[62594.296264] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[62594.296264] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[62594.296264] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[62594.296264] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[62594.296264] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[62594.296264] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[62594.296264] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[62594.296264] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[62594.296264] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[62594.296264] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[62594.296264] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[62594.296264] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[62594.296264] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[62594.296264] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[62594.296264] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[62594.296264] Enabling non-boot CPUs ...
[62594.296264] SMP alternatives: switching to SMP code
[62594.420219] Booting processor 1 APIC 0x1 ip 0x6000
[62594.279936] Initializing CPU#1
[62594.279936] Calibrating delay using timer specific routine.. 4521.96 BogoMIPS (lpj=9043932)
[62594.279936] CPU: L1 I cache: 32K, L1 D cache: 32K
[62594.279936] CPU: L2 cache: 3072K
[62594.279936] [ds] using Core 2/Atom configuration
[62594.279936] CPU: Physical Processor ID: 0
[62594.279936] CPU: Processor Core ID: 1
[62594.279936] CPU1: Thermal monitoring enabled (TM2)
[62594.508560] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[62594.512015] Switched to high resolution mode on CPU 1
[62594.520345] CPU1 is up
[62594.520347] ACPI: Waking up from system sleep state S3
[62594.547312] thinkpad_acpi: EC reports that Thermal Table has changed
[62594.672130] ACPI: \_SB_.GDCK - docking
[62594.721181] acpi device:27: parent device:14 should not be sleeping
[62594.723707] acpi IBM0079:00: parent device:00 should not be sleeping
[62594.732669] ACPI: EC: non-query interrupt received, switching to interrupt mode
[62594.793198] pci 0000:00:02.0: PME# disabled
[62594.793209] pci 0000:00:02.1: PME# disabled
[62594.793218] pci 0000:00:03.0: PME# disabled
[62594.793317] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[62594.793327] e1000e 0000:00:19.0: setting latency timer to 64
[62594.793334] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[62594.793342] e1000e 0000:00:19.0: PME# disabled
[62594.793346] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[62594.793354] e1000e 0000:00:19.0: PME# disabled
[62594.793407] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[62594.849120] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[62594.849130] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[62594.849140] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[62594.849172] usb usb1: root hub lost power or was reset
[62594.849199] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[62594.849209] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[62594.849238] usb usb2: root hub lost power or was reset
[62594.850198] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[62594.850208] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[62594.850218] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[62594.850248] usb usb3: root hub lost power or was reset
[62594.850274] ehci_hcd 0000:00:1a.7: PME# disabled
[62594.851099] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[62594.851111] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[62594.851122] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[62594.851133] ehci_hcd 0000:00:1a.7: PME# disabled
[62594.851163] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[62594.851173] HDA Intel 0000:00:1b.0: setting latency timer to 64
[62594.944107] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[62594.944121] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[62594.944139] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[62594.945237] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[62594.945246] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[62594.945257] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[62594.945287] usb usb4: root hub lost power or was reset
[62594.945313] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[62594.945323] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[62594.945352] usb usb5: root hub lost power or was reset
[62594.945376] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[62594.945386] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[62594.945416] usb usb6: root hub lost power or was reset
[62594.945440] ehci_hcd 0000:00:1d.7: PME# disabled
[62594.946372] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[62594.946383] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[62594.946394] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[62594.946405] ehci_hcd 0000:00:1d.7: PME# disabled
[62594.946435] pci 0000:00:1e.0: setting latency timer to 64
[62594.946540] ahci 0000:00:1f.2: setting latency timer to 64
[62594.946835] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[62594.947019] iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
[62594.960054] sd 0:0:0:0: [sda] Starting disk
[62594.978066] Registered led device: iwl-phy1:radio
[62594.978113] Registered led device: iwl-phy1:assoc
[62594.978161] Registered led device: iwl-phy1:RX
[62594.978206] Registered led device: iwl-phy1:TX
[62595.268123] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[62595.275068] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[62595.275922] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[62595.279665] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX10, max UDMA/133
[62595.287421] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[62595.288346] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[62595.292101] ata2.00: configured for UDMA/133
[62595.485407] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX10 PQ: 0 ANSI: 5
[62596.500121] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[62596.562310] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[62596.562316] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[62596.562489] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[62596.562495] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[62596.573396] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[62596.573402] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[62596.573574] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[62596.573580] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[62596.574486] ata1.00: configured for UDMA/100
[62596.576568] ata1.00: configured for UDMA/100
[62596.592118] ata1: EH complete
[62596.592181] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[62596.592215] sd 0:0:0:0: [sda] Write Protect is off
[62596.592220] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[62596.592270] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[62596.592325] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[62596.592354] sd 0:0:0:0: [sda] Write Protect is off
[62596.592359] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[62596.592408] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[62597.284955] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[62597.285705] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[62597.976140] usb 7-6: reset high speed USB device using ehci_hcd and address 3
[62598.224133] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[62598.376379] pci 0000:00:02.0: power state changed by ACPI to D0
[62598.376573] pci 0000:00:02.0: power state changed by ACPI to D0
[62598.376586] pci 0000:00:02.0: setting latency timer to 64
[62598.488120] usb 8-6: reset high speed USB device using ehci_hcd and address 5
[62598.649386] Restarting tasks ... done.
[62598.773029] usb 7-5: new high speed USB device using ehci_hcd and address 4
[62598.928587] usb 7-5: configuration #1 chosen from 1 choice
[62598.932115] hub 7-5:1.0: USB hub found
[62598.932187] hub 7-5:1.0: 4 ports detected
[62599.009330] Driver 'sr' needs updating - please use bus_type methods
[62599.020838] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[62599.020842] Uniform CD-ROM driver Revision: 3.20
[62599.020925] sr 1:0:0:0: Attached scsi CD-ROM sr0
[62599.042180] sd 0:0:0:0: Attached scsi generic sg0 type 0
[62599.042219] sd 7:0:0:0: Attached scsi generic sg1 type 0
[62599.042257] sr 1:0:0:0: Attached scsi generic sg2 type 5
[62599.204237] usb 7-5.4: new full speed USB device using ehci_hcd and address 5
[62599.298812] usb 7-5.4: configuration #1 chosen from 1 choice
[62599.482931] usblp0: USB Bidirectional printer dev 5 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0B17
[62599.483501] usbcore: registered new interface driver usblp
[62599.866507] ready
[62599.867008] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[62599.867585] sd 7:0:0:0: [sdb] Write Protect is off
[62599.867592] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[62599.867597] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[62599.868978] sd 7:0:0:0: [sdb] 1984000 512-byte hardware sectors: (1.01 GB/968 MiB)
[62599.869601] sd 7:0:0:0: [sdb] Write Protect is off
[62599.869607] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[62599.869612] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[62599.869618] sdb: sdb1
[62602.289229] e1000e: eth0 NIC Link is Down
[62605.480895] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[62605.481662] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[62623.516153] eth0: no IPv6 routers present
[64148.377651] RPC: Registered udp transport module.
[64148.377660] RPC: Registered tcp transport module.
--
Think about Free and Open Source Software (FOSS).
http://nico.schottelius.org/documentations/foss/the-term-foss/
PGP: BFE4 C736 ABE5 406F 8F42 F7CF B8BE F92A 9885 188C
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: X200: Brightness broken since 2.6.29-rc4-58-g4c098bc
2009-02-13 18:05 ` X200: Brightness broken since 2.6.29-rc4-58-g4c098bc Len Brown
2009-02-16 9:06 ` ZhangRui
@ 2009-02-16 15:54 ` Nico Schottelius
2009-02-19 9:01 ` Nico Schottelius
1 sibling, 1 reply; 8+ messages in thread
From: Nico Schottelius @ 2009-02-16 15:54 UTC (permalink / raw)
To: Len Brown
Cc: Ingo Molnar, Nico Schottelius, LKML, Matthew Garrett,
Rafael J. Wysocki, Andrew Morton, linux-acpi
[-- Attachment #1: Type: text/plain, Size: 1205 bytes --]
Len Brown [Fri, Feb 13, 2009 at 01:05:28PM -0500]:
> Nico,
> there are not a lot of changes between rc4 and the breakage,
> (and none of them jump out at me) can you git-bisect?
The result of git-bisecting and some reboots:
ikn% git bisect start 4c098bc d5b5623
[compile....reboot...]
[16:50] ikn:linux-2.6% git describe
v2.6.29-rc3-432-g9b8d5a1
[16:50] ikn:linux-2.6% git bisect good
e806b4957412bf472d826bd8cc571da041248799 is first bad commit
commit e806b4957412bf472d826bd8cc571da041248799
Author: Eric Anholt <eric@anholt.net>
Date: Thu Jan 22 09:56:58 2009 -0800
drm/i915: Suppress GEM teardown on X Server exit in KMS mode.
Fixes hangs when starting X for the second time.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
:040000 040000 5405babd9cab9d53791a0b58b5ad7f823f76ec9c 70f9a79c6b3072ea0777d6ab307330da37af076c M
drivers
I saved almost all dmesg outputs, if you need some ;-)
Sincerly,
Nico
--
Think about Free and Open Source Software (FOSS).
http://nico.schottelius.org/documentations/foss/the-term-foss/
PGP: BFE4 C736 ABE5 406F 8F42 F7CF B8BE F92A 9885 188C
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: 2.6.29-rc5: Reported regressions from 2.6.28
2009-02-16 7:29 ` 2.6.29-rc5: Reported regressions from 2.6.28 Jarek Poplawski
@ 2009-02-16 21:11 ` Rafael J. Wysocki
0 siblings, 0 replies; 8+ messages in thread
From: Rafael J. Wysocki @ 2009-02-16 21:11 UTC (permalink / raw)
To: Jarek Poplawski
Cc: Linux Kernel Mailing List, Adrian Bunk, Andrew Morton,
Linus Torvalds, Natalie Protasevich, Kernel Testers List,
Network Development, Linux ACPI, Linux PM List, Linux SCSI List
On Monday 16 February 2009, Jarek Poplawski wrote:
> On 14-02-2009 21:35, Rafael J. Wysocki wrote:
> > This message contains a list of some regressions from 2.6.28, for which there
> > are no fixes in the mainline I know of. If any of them have been fixed already,
> > please let me know.
> ...
> > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12615
> > Subject : boot hangs while bringing up gianfar ethernet
> > Submitter : Ira Snyder <iws@ovro.caltech.edu>
> > Date : 2009-01-29 19:41 (17 days old)
> > References : http://marc.info/?l=linux-kernel&m=123325817201665&w=4
>
> Fixed by:
> commit 8707bdd48ab705a459ac1b12014075a139d1d4f9
> gianfar: Fix boot hangs while bringing up gianfar ethernet
> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=8707bdd48ab705a459ac1b12014075a139d1d4f9
Thanks, closed.
Rafael
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: X200: Brightness broken since 2.6.29-rc4-58-g4c098bc
2009-02-16 15:54 ` Nico Schottelius
@ 2009-02-19 9:01 ` Nico Schottelius
0 siblings, 0 replies; 8+ messages in thread
From: Nico Schottelius @ 2009-02-19 9:01 UTC (permalink / raw)
To: Nico Schottelius, Len Brown, Ingo Molnar, LKML, Matthew Garrett
[-- Attachment #1: Type: text/plain, Size: 240 bytes --]
Issue persisting on 2.6.29-rc5-ikn-00168-gba95fd4
Nico
--
Think about Free and Open Source Software (FOSS).
http://nico.schottelius.org/documentations/foss/the-term-foss/
PGP: BFE4 C736 ABE5 406F 8F42 F7CF B8BE F92A 9885 188C
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2009-02-19 9:04 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-02-14 20:35 2.6.29-rc5: Reported regressions from 2.6.28 Rafael J. Wysocki
[not found] ` <1234911925.9844.89.camel@gaiman>
[not found] ` <20090217231313.GA2654@srcf.ucam.org>
[not found] ` <200902171523.57612.jbarnes@virtuousgeek.org>
[not found] ` <20090213093354.GA10175@denkbrett.schottelius.org>
[not found] ` <20090213094200.GC17774@elte.hu>
2009-02-13 18:05 ` X200: Brightness broken since 2.6.29-rc4-58-g4c098bc Len Brown
2009-02-16 9:06 ` ZhangRui
2009-02-16 10:58 ` Nico Schottelius
2009-02-16 15:54 ` Nico Schottelius
2009-02-19 9:01 ` Nico Schottelius
2009-02-16 7:29 ` 2.6.29-rc5: Reported regressions from 2.6.28 Jarek Poplawski
2009-02-16 21:11 ` Rafael J. Wysocki
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox