From: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
To: Len Brown <lenb@kernel.org>
Cc: linux-acpi <linux-acpi@vger.kernel.org>
Subject: [PATCH] ACPI: Disable ARB_DISABLE on platforms where it is not needed
Date: Thu, 21 May 2009 16:48:13 -0700 [thread overview]
Message-ID: <20090521234813.GA11561@linux-os.sc.intel.com> (raw)
ARB_DISABLE is a nop on all of the recent Intel platforms. Disable
ARB_DISABLE and attached c3_lock on C3 entry exit for such platforms.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
---
arch/x86/kernel/acpi/cstate.c | 16 +++++++++++++---
drivers/acpi/processor_idle.c | 7 +++++--
2 files changed, 18 insertions(+), 5 deletions(-)
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index bbbe4bb..763637d 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -34,12 +34,22 @@ void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags,
flags->bm_check = 1;
else if (c->x86_vendor == X86_VENDOR_INTEL) {
/*
- * Today all CPUs that support C3 share cache.
- * TBD: This needs to look at cache shared map, once
- * multi-core detection patch makes to the base.
+ * Today all MP CPUs that support C3 share cache.
+ * And caches should not be flushed by software while
+ * entering C3 type state.
*/
flags->bm_check = 1;
}
+
+ /*
+ * On all recent platforms, ARB_DISABLE is a nop.
+ * So, set bm_control to zero to indicate that ARB_DISABLE
+ * is not required while entering C3 type state on
+ * P4, Core and beyond CPUs
+ */
+ if (c->x86_vendor == X86_VENDOR_INTEL &&
+ (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 14)))
+ flags->bm_control = 0;
}
EXPORT_SYMBOL(acpi_processor_power_init_bm_check);
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 72069ba..4840c79 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -512,7 +512,8 @@ static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx)
static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
struct acpi_processor_cx *cx)
{
- static int bm_check_flag;
+ static int bm_check_flag = -1;
+ static int bm_control_flag = -1;
if (!cx->address)
@@ -542,12 +543,14 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
}
/* All the logic here assumes flags.bm_check is same across all CPUs */
- if (!bm_check_flag) {
+ if (bm_check_flag == -1) {
/* Determine whether bm_check is needed based on CPU */
acpi_processor_power_init_bm_check(&(pr->flags), pr->id);
bm_check_flag = pr->flags.bm_check;
+ bm_control_flag = pr->flags.bm_control;
} else {
pr->flags.bm_check = bm_check_flag;
+ pr->flags.bm_control = bm_control_flag;
}
if (pr->flags.bm_check) {
--
1.6.0.6
next reply other threads:[~2009-05-21 23:48 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-21 23:48 Pallipadi, Venkatesh [this message]
2009-05-21 23:53 ` [PATCH] ACPI: Disable ARB_DISABLE on platforms where it is not needed Matthew Garrett
2009-05-22 0:09 ` Pallipadi, Venkatesh
2009-05-28 1:57 ` Len Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090521234813.GA11561@linux-os.sc.intel.com \
--to=venkatesh.pallipadi@intel.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox