From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matthew Palmer Subject: Re: Lenovo S10e, charge_full == 0 ?!? Date: Mon, 1 Jun 2009 11:45:51 +1000 Message-ID: <20090601014551.GB6528@hezmatt.org> References: <20090531214220.GK27997@hezmatt.org> <1243816851.3558.14.camel@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from sasquatch.hezmatt.org ([70.85.129.92]:38173 "EHLO sasquatch.hezmatt.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753135AbZFABpt (ORCPT ); Sun, 31 May 2009 21:45:49 -0400 Content-Disposition: inline In-Reply-To: <1243816851.3558.14.camel@localhost.localdomain> Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: yakui_zhao Cc: "linux-acpi@vger.kernel.org" [All: Cc's please, I'm not subscribed] Hi Yakui, On Mon, Jun 01, 2009 at 08:40:51AM +0800, yakui_zhao wrote: > On Mon, 2009-06-01 at 05:42 +0800, Matthew Palmer wrote: > > [Please Cc me; I'm not subscribed to the list] > > > > Hi, > Will you please check whether the output of "cat /proc/acpi/battery/*/*" > is normal? The tricky part there is: what exactly counts as "normal"? As best I can tell by comparing it to the output of my other laptop, the only possible weirdnesses are: alarm: unsupported last full capacity: 0 mAh Everything else looks reasonably similar. Since it's only about 20 lines long, I've pasted the whole output into the end of this e-mail. Perhaps there's something that's unobviously wrong. > Of course you can open a new bug at > http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI > and attach the output of acpidump, "cat /proc/acpi/battery/*/*". I'm not sure I care enough to create yet another never-to-be-used-again bugzilla account. I plan on nailing this problem down myself, with assistance, rather than just reporting a bug and hoping someone else fixes it for me. I've placed the acpidump output at http://hezmatt.org/~mpalmer/tmp/acpidump_s10e.txt if anyone can make any sense of it. (If there's a "Dummies Guide to Interpreting acpidump Output" somewhere, I'd love to know about it). - Matt ---[BEGIN: /proc/acpi/battery/*/* ]--- alarm: unsupported present: yes design capacity: 4876 mAh last full capacity: 0 mAh battery technology: rechargeable design voltage: 10800 mV design capacity warning: 487 mAh design capacity low: 146 mAh capacity granularity 1: 10 mAh capacity granularity 2: 25 mAh model number: LE60_S serial number: battery type: LION OEM info: Sanyo present: yes capacity state: ok charging state: discharging present rate: 871 mA remaining capacity: 4359 mAh present voltage: 12026 mV ---[END]--- -- I remember going to my first tutorial in room 404. I was most upset when I found it.