From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Rafael J. Wysocki" Subject: Re: [linux-pm] [patch update 2 fix] PM: Introduce core framework for run-time PM of I/O devices Date: Mon, 22 Jun 2009 17:27:28 +0200 Message-ID: <200906221727.29295.rjw@sisk.pl> References: Mime-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from ogre.sisk.pl ([217.79.144.158]:58687 "EHLO ogre.sisk.pl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750958AbZFVP1L (ORCPT ); Mon, 22 Jun 2009 11:27:11 -0400 In-Reply-To: Content-Disposition: inline Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: Alan Stern Cc: Magnus Damm , Greg KH , LKML , ACPI Devel Maling List , Linux-pm mailing list , Ingo Molnar On Monday 22 June 2009, Alan Stern wrote: > On Sun, 21 Jun 2009, Rafael J. Wysocki wrote: > > > > Seriously, there _are_ places where drivers get bound to device before > > > those devices are registered. This happens for example in USB when a > > > bunch of related interfaces are present in the same physical device. > > > When the first interface is registered, its driver binds itself to all > > > the others even though they haven't been registered yet. > > > > Well, the suspend functions could be protected against that under the > > assumption that no suspend is possible for resume_counter = 0 (then, the "good > > to go" value would be -1). > > > > Still, the resume functions start from acquring a spinlock, which is not going > > to work if that spinlock is uninitialized. > > The initialization needs to be improved. Most of the code in > pm_runtime_init() should be called from device_pm_init(), and the rest > should be moved into a separate pm_runtime_add() routine to be called > from device_pm_add(). OK In that case, I think, the initialization of the spinlock and resume_counter can be put into the thing called by device_pm_init(). > One of the things pm_runtime_add() could do is change the status from > RPM_UNREGISTERED to RPM_ACTIVE. If the status is initially (ie. at the device_pm_init() point) RPM_ACTIVE and resume_couter is initially 1, what are we going to need RPM_UNREGISTERED for? Rafael