* Regression in ACPI in 2.6.31-rc5
@ 2009-08-07 22:33 Ricardo Jorge da Fonseca Marques Ferreira
2009-08-13 3:53 ` Len Brown
0 siblings, 1 reply; 6+ messages in thread
From: Ricardo Jorge da Fonseca Marques Ferreira @ 2009-08-07 22:33 UTC (permalink / raw)
To: linux-kernel; +Cc: linux-acpi
[-- Attachment #1: Type: Text/Plain, Size: 1578 bytes --]
Please CC: me as i'm not subscribed to the list.
Hi.
I had two drivers stop working in 2.6.31 that were working fine in 2.6.30.
They are iwlagn and sky2. If i pass acpi=off to the kernel, they work as
expected.
This is what is output from the drivers when they don't work:
[ 7.878413] sky2 driver version 1.23
[ 7.884402] sky2 0000:07:00.0: enabling device (0000 -> 0003)
[ 7.889483] sky2 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.894502] sky2 0000:07:00.0: setting latency timer to 64
[ 7.894555] sky2 0000:07:00.0: unsupported chip type 0xff
[ 7.899554] sky2 0000:07:00.0: PCI INT A disabled
[ 7.904379] sky2: probe of 0000:07:00.0 failed with error -95
[ 8.857709] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux,
1.3.27kds
[ 8.863357] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 8.875763] iwlagn 0000:08:00.0: enabling device (0000 -> 0002)
[ 8.881477] iwlagn 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.887083] iwlagn 0000:08:00.0: setting latency timer to 64
[ 8.887128] iwlagn 0000:08:00.0: Detected Intel Wireless WiFi Link 5100AGN
REV=0xFDFFFFFF
[ 9.073995] iwlagn 0000:08:00.0: Failed, HW not ready
[ 9.080292] iwlagn 0000:08:00.0: PCI INT A disabled
Attached are the complete dmesg and lspci -v output.
This is using the SuSE repos version of 2.6.31-rc5 but i tried the vanilla
kernel packages and the same happens.
Anything i can help with to resolve this, let me know. This bug took out all
my onboard networking so i'm now using a USB wifi stick.
Thanks
[-- Attachment #2: lspci.log --]
[-- Type: text/x-log, Size: 11321 bytes --]
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Toshiba America Info Systems Device ff50
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
Subsystem: Toshiba America Info Systems Device ff50
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory at f4000000 (64-bit, non-prefetchable) [size=4M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 1800 [size=8]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+
Capabilities: [d0] Power Management version 3
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Toshiba America Info Systems Device ff50
Flags: bus master, fast devsel, latency 0
Memory at f4400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 3
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device ff50
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 1820 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device ff50
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 1840 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device ff50
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 1860 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Device ff50
Flags: bus master, medium devsel, latency 0, IRQ 19
Memory at f4a04800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features <?>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Toshiba America Info Systems Device ff50
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at f4800000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Device ff50
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: b6000000-b60fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Device ff50
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Memory behind bridge: b6100000-b61fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Device ff50
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device ff50
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at 1880 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device ff50
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 18a0 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device ff50
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 18c0 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Device ff50
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at f4a04c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features <?>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=32
Memory behind bridge: f4700000-f47fffff
Capabilities: [50] Subsystem: Toshiba America Info Systems Device ff50
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
Subsystem: Toshiba America Info Systems Device ff50
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel modules: iTCO_wdt
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Toshiba America Info Systems Device ff50
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 27
I/O ports at 1818 [size=8]
I/O ports at 180c [size=4]
I/O ports at 1810 [size=8]
I/O ports at 1808 [size=4]
I/O ports at 18e0 [size=32]
Memory at f4a04000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/16 Enable+
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA <?>
Capabilities: [b0] PCIe advanced features <?>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Toshiba America Info Systems Device ff50
Flags: medium devsel, IRQ 19
Memory at b6200000 (64-bit, non-prefetchable) [size=256]
I/O ports at 1c00 [size=32]
Kernel modules: i2c-i801
07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12)
Subsystem: Toshiba America Info Systems Device ff50
Flags: fast devsel, IRQ 16
Memory at b6000000 (64-bit, non-prefetchable) [size=16K]
I/O ports at 2000 [size=256]
Capabilities: [48] Power Management version 3
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
Capabilities: [c0] Express Legacy Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 1f, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [130] Device Serial Number 00-23-8b-ff-ff-67-11-3b
Kernel modules: sky2
08:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
Subsystem: Intel Corporation Device 1201
Flags: fast devsel, IRQ 17
Memory at b6100000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
Capabilities: [e0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140] Device Serial Number 46-e1-18-ff-ff-fa-22-00
Kernel driver in use: iwlagn
Kernel modules: iwlagn
0a:01.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Device ff50
Flags: bus master, stepping, medium devsel, latency 32, IRQ 16
Memory at ff501000 (32-bit, non-prefetchable) [size=4K]
Memory at f4700000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [60] Power Management version 2
Kernel driver in use: ohci1394
Kernel modules: ohci1394
0a:01.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02) (prog-if 01)
Subsystem: Toshiba America Info Systems Device ff50
Flags: bus master, slow devsel, latency 32, IRQ 16
Memory at f4700800 (32-bit, non-prefetchable) [size=256]
Capabilities: [a0] Power Management version 2
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci
0a:01.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01)
Subsystem: Toshiba America Info Systems Device ff50
Flags: slow devsel, IRQ 255
Memory at f4702000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [a0] Power Management version 2
[-- Attachment #3: dmesg.log --]
[-- Type: text/x-log, Size: 68841 bytes --]
[ 0.000000] Linux version 2.6.31-rc5-git3-13-desktop (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP PREEMPT 2009-08-06 23:25:57 +0200
[ 0.000000] Command line: root=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part2 repair=1 resume=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1 splash=silent elevator=cfq vga=0x317
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b5aa1000 (usable)
[ 0.000000] BIOS-e820: 00000000b5aa1000 - 00000000b5aa7000 (reserved)
[ 0.000000] BIOS-e820: 00000000b5aa7000 - 00000000b5bba000 (usable)
[ 0.000000] BIOS-e820: 00000000b5bba000 - 00000000b5c0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000b5c0f000 - 00000000b5d08000 (usable)
[ 0.000000] BIOS-e820: 00000000b5d08000 - 00000000b5f0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000b5f0f000 - 00000000b5f18000 (usable)
[ 0.000000] BIOS-e820: 00000000b5f18000 - 00000000b5f1f000 (reserved)
[ 0.000000] BIOS-e820: 00000000b5f1f000 - 00000000b5f65000 (usable)
[ 0.000000] BIOS-e820: 00000000b5f65000 - 00000000b5f9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b5f9f000 - 00000000b5fe1000 (usable)
[ 0.000000] BIOS-e820: 00000000b5fe1000 - 00000000b5fff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b5fff000 - 00000000b6000000 (usable)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000b7e00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xb6000 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f400 (usable)
[ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000b5aa1000 (usable)
[ 0.000000] modified: 00000000b5aa1000 - 00000000b5aa7000 (reserved)
[ 0.000000] modified: 00000000b5aa7000 - 00000000b5bba000 (usable)
[ 0.000000] modified: 00000000b5bba000 - 00000000b5c0f000 (reserved)
[ 0.000000] modified: 00000000b5c0f000 - 00000000b5d08000 (usable)
[ 0.000000] modified: 00000000b5d08000 - 00000000b5f0f000 (reserved)
[ 0.000000] modified: 00000000b5f0f000 - 00000000b5f18000 (usable)
[ 0.000000] modified: 00000000b5f18000 - 00000000b5f1f000 (reserved)
[ 0.000000] modified: 00000000b5f1f000 - 00000000b5f65000 (usable)
[ 0.000000] modified: 00000000b5f65000 - 00000000b5f9f000 (ACPI NVS)
[ 0.000000] modified: 00000000b5f9f000 - 00000000b5fe1000 (usable)
[ 0.000000] modified: 00000000b5fe1000 - 00000000b5fff000 (ACPI data)
[ 0.000000] modified: 00000000b5fff000 - 00000000b6000000 (usable)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000b6000000
[ 0.000000] 0000000000 - 00b6000000 page 2M
[ 0.000000] kernel direct mapping tables up to b6000000 @ 8000-c000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ a000-10000
[ 0.000000] RAMDISK: 37a98000 - 37fef116
[ 0.000000] ACPI: RSDP 00000000000f6e60 00024 (v02 TOSQCI)
[ 0.000000] ACPI: XSDT 00000000b5ff4a00 0007C (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000b5fe5000 000F4 (v03 T0SQCI TOSQCI00 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000b5fe6000 09F7C (v02 TOSQCI CANTIGA 06040000 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000b5f9efc0 00040
[ 0.000000] ACPI: APIC 00000000b5ffed1e 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 00000000b5ffed86 00038 (v01 TOSQCI TOSQCI00 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000b5ffedbe 0003C (v01 TOSQCI TOSQCI00 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 00000000b5ffedfa 00068 (v01 PTLTD APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000b5ffee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000b5ffee8a 00176 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 00000000b5ff4aa4 00196 (v01 SataRe SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000b5fe4000 00655 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000b5fe3000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000b5fe2000 0020F (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000000000b000 - 0000000000022fff]
[ 0.000000] bootmap [0000000000023000 - 000000000004afff] pages 28
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001c59cb0] TEXT DATA BSS ==> [0001000000 - 0001c59cb0]
[ 0.000000] #3 [0037a98000 - 0037fef116] RAMDISK ==> [0037a98000 - 0037fef116]
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
[ 0.000000] #5 [0001c5a000 - 0001c5a1e4] BRK ==> [0001c5a000 - 0001c5a1e4]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
[ 0.000000] found SMP MP-table at [ffff8800000f6f20] f6f20
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001e00000-ffff8800055fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[10] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000b5aa1
[ 0.000000] 0: 0x000b5aa7 -> 0x000b5bba
[ 0.000000] 0: 0x000b5c0f -> 0x000b5d08
[ 0.000000] 0: 0x000b5f0f -> 0x000b5f18
[ 0.000000] 0: 0x000b5f1f -> 0x000b5f65
[ 0.000000] 0: 0x000b5f9f -> 0x000b5fe1
[ 0.000000] 0: 0x000b5fff -> 0x000b6000
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1006809
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3836 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 726391 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b5aa1000 - 00000000b5aa7000
[ 0.000000] PM: Registered nosave memory: 00000000b5bba000 - 00000000b5c0f000
[ 0.000000] PM: Registered nosave memory: 00000000b5d08000 - 00000000b5f0f000
[ 0.000000] PM: Registered nosave memory: 00000000b5f18000 - 00000000b5f1f000
[ 0.000000] PM: Registered nosave memory: 00000000b5f65000 - 00000000b5f9f000
[ 0.000000] PM: Registered nosave memory: 00000000b5fe1000 - 00000000b5fff000
[ 0.000000] PM: Registered nosave memory: 00000000b6000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at b6000000 (gap: b6000000:4a000000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages at ffff88000564b000, static data 82784 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 988787
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part2 repair=1 resume=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1 splash=silent elevator=cfq vga=0x317
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff88000568c000 - ffff88000968c000
[ 0.000000] software IO TLB at phys 0x568c000 - 0x968c000
[ 0.000000] Memory: 3885104k/5242880k available (5588k kernel code, 1215644k absent, 142132k reserved, 4405k data, 1004k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2526.452 MHz processor.
[ 0.000089] Console: colour dummy device 80x25
[ 0.000091] console [tty0] enabled
[ 0.000547] hpet clockevent registered
[ 0.000552] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000561] Calibrating delay loop (skipped), value calculated using timer frequency.. 5052.90 BogoMIPS (lpj=2526452)
[ 0.007074] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
[ 0.007185] Security Framework initialized
[ 0.007206] AppArmor: AppArmor initialized
[ 0.007515] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009793] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011308] Mount-cache hash table entries: 256
[ 0.011495] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.011500] CPU: L2 cache: 3072K
[ 0.011505] CPU 0/0x0 -> Node 0
[ 0.011508] CPU: Physical Processor ID: 0
[ 0.011511] CPU: Processor Core ID: 0
[ 0.011515] mce: CPU supports 6 MCE banks
[ 0.011524] CPU0: Thermal monitoring enabled (TM2)
[ 0.011530] using mwait in idle threads.
[ 0.011532] Performance Counters: Core2 events, Intel PMU driver.
[ 0.011541] ... version: 2
[ 0.011543] ... bit width: 40
[ 0.011546] ... generic counters: 2
[ 0.011549] ... value mask: 000000ffffffffff
[ 0.011552] ... max period: 000000007fffffff
[ 0.011555] ... fixed-purpose counters: 3
[ 0.011558] ... counter mask: 0000000700000003
[ 0.012471] ACPI: Core revision 20090521
[ 0.028068] Setting APIC routing to flat
[ 0.029313] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.039322] CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
[ 0.039993] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Calibrating delay using timer specific routine.. 5053.74 BogoMIPS (lpj=2526874)
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 3072K
[ 0.000999] CPU 1/0x1 -> Node 0
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.000999] mce: CPU supports 6 MCE banks
[ 0.000999] CPU1: Thermal monitoring enabled (TM2)
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.111553] CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
[ 0.111581] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.112009] Brought up 2 CPUs
[ 0.112009] Total of 2 processors activated (10106.65 BogoMIPS).
[ 0.112071] CPU0 attaching sched-domain:
[ 0.112073] domain 0: span 0-1 level MC
[ 0.112076] groups: 0 1
[ 0.112081] CPU1 attaching sched-domain:
[ 0.112082] domain 0: span 0-1 level MC
[ 0.112084] groups: 1 0
[ 0.114609] devtmpfs: initialized
[ 0.117834] Booting paravirtualized kernel on bare hardware
[ 0.118004] regulator: core version 0.5
[ 0.118035] Time: 23:15:13 Date: 08/07/09
[ 0.118091] NET: Registered protocol family 16
[ 0.118217] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.118223] ACPI: bus type pci registered
[ 0.118291] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.118296] PCI: Not using MMCONFIG.
[ 0.118299] PCI: Using configuration type 1 for base access
[ 0.119061] bio: create slab <bio-0> at 0
[ 0.120106] ACPI: EC: Look up EC in DSDT
[ 0.126221] ACPI: BIOS _OSI(Linux) query ignored
[ 0.128104] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.633002] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 0.796112] ACPI: Interpreter enabled
[ 0.796117] ACPI: (supports S0 S3 S4 S5)
[ 0.796143] ACPI: Using IOAPIC for interrupt routing
[ 0.796197] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.798923] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.810560] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.817014] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.817019] ACPI: EC: driver started in poll mode
[ 0.817448] ACPI: No dock devices found.
[ 0.818121] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.818210] pci 0000:00:02.0: reg 10 64bit mmio: [0xf4000000-0xf43fffff]
[ 0.818216] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.818220] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
[ 0.818253] pci 0000:00:02.1: reg 10 64bit mmio: [0xf4400000-0xf44fffff]
[ 0.818373] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
[ 0.818464] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
[ 0.818555] pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f]
[ 0.818648] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf4a04800-0xf4a04bff]
[ 0.818713] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.818721] pci 0000:00:1a.7: PME# disabled
[ 0.818777] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4800000-0xf4803fff]
[ 0.818836] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.818842] pci 0000:00:1b.0: PME# disabled
[ 0.818925] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.818932] pci 0000:00:1c.0: PME# disabled
[ 0.819025] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.819031] pci 0000:00:1c.4: PME# disabled
[ 0.819117] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.819123] pci 0000:00:1c.5: PME# disabled
[ 0.819198] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f]
[ 0.819287] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf]
[ 0.819379] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df]
[ 0.819471] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4a04c00-0xf4a04fff]
[ 0.819538] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.819545] pci 0000:00:1d.7: PME# disabled
[ 0.819793] pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f]
[ 0.819800] pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f]
[ 0.819808] pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817]
[ 0.819815] pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b]
[ 0.819822] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
[ 0.819829] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf4a04000-0xf4a047ff]
[ 0.819875] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.819881] pci 0000:00:1f.2: PME# disabled
[ 0.819921] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff]
[ 0.819939] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
[ 0.820029] pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
[ 0.820033] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff]
[ 0.820041] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 0.820113] pci 0000:07:00.0: reg 10 64bit mmio: [0x000000-0x003fff]
[ 0.820123] pci 0000:07:00.0: reg 18 io port: [0x00-0xff]
[ 0.820203] pci 0000:07:00.0: supports D1 D2
[ 0.820204] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.820213] pci 0000:07:00.0: PME# disabled
[ 0.820289] pci 0000:00:1c.4: bridge io port: [0x00-0xfff]
[ 0.820294] pci 0000:00:1c.4: bridge 32bit mmio: [0x000000-0x0fffff]
[ 0.820301] pci 0000:00:1c.4: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 0.820388] pci 0000:08:00.0: reg 10 64bit mmio: [0x000000-0x001fff]
[ 0.820501] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.820510] pci 0000:08:00.0: PME# disabled
[ 0.820593] pci 0000:00:1c.5: bridge io port: [0x00-0xfff]
[ 0.820598] pci 0000:00:1c.5: bridge 32bit mmio: [0x000000-0x0fffff]
[ 0.820605] pci 0000:00:1c.5: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 0.820647] pci 0000:0a:01.0: reg 10 32bit mmio: [0xff501000-0xff501fff]
[ 0.820655] pci 0000:0a:01.0: reg 14 32bit mmio: [0xf4700000-0xf47007ff]
[ 0.820702] pci 0000:0a:01.0: supports D1 D2
[ 0.820704] pci 0000:0a:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.820711] pci 0000:0a:01.0: PME# disabled
[ 0.820759] pci 0000:0a:01.2: reg 10 32bit mmio: [0xf4700800-0xf47008ff]
[ 0.820826] pci 0000:0a:01.2: supports D1 D2
[ 0.820828] pci 0000:0a:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.820835] pci 0000:0a:01.2: PME# disabled
[ 0.820883] pci 0000:0a:01.3: reg 10 32bit mmio: [0xf4702000-0xf4702fff]
[ 0.820948] pci 0000:0a:01.3: supports D1 D2
[ 0.820950] pci 0000:0a:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.820957] pci 0000:0a:01.3: PME# disabled
[ 0.821026] pci 0000:00:1e.0: transparent bridge
[ 0.821035] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4700000-0xf47fffff]
[ 0.821070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.821226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.821336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.821426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.835123] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.835249] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.835373] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 *6 7 10 12 14 15)
[ 0.835496] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.835621] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.835746] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.835870] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.835994] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.836187] SCSI subsystem initialized
[ 0.836832] libata version 3.00 loaded.
[ 0.836832] usbcore: registered new interface driver usbfs
[ 0.836832] usbcore: registered new interface driver hub
[ 0.836832] usbcore: registered new device driver usb
[ 0.836832] PCI: Using ACPI for IRQ routing
[ 0.836832] pci 0000:00:1c.0: BAR 13: can't allocate resource
[ 0.836832] pci 0000:00:1c.0: BAR 14: can't allocate resource
[ 0.836832] pci 0000:00:1c.0: BAR 15: can't allocate resource
[ 0.836832] pci 0000:00:1c.4: BAR 13: can't allocate resource
[ 0.836832] pci 0000:00:1c.4: BAR 14: can't allocate resource
[ 0.836832] pci 0000:00:1c.4: BAR 15: can't allocate resource
[ 0.836832] pci 0000:00:1c.5: BAR 13: can't allocate resource
[ 0.836832] pci 0000:00:1c.5: BAR 14: can't allocate resource
[ 0.836832] pci 0000:00:1c.5: BAR 15: can't allocate resource
[ 0.839028] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.839036] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.843007] Switched to high resolution mode on CPU 0
[ 0.843619] Switched to high resolution mode on CPU 1
[ 0.843711] AppArmor: AppArmor Filesystem Enabled
[ 0.845258] pnp: PnP ACPI init
[ 0.845268] ACPI: bus type pnp registered
[ 0.846503] pnp 00:04: io resource (0x2e-0x2f) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.846510] pnp 00:04: io resource (0x4e-0x4f) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.846516] pnp 00:04: io resource (0x61-0x61) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.846522] pnp 00:04: io resource (0x63-0x63) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.846527] pnp 00:04: io resource (0x65-0x65) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.846533] pnp 00:04: io resource (0x67-0x67) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.846538] pnp 00:04: io resource (0x68-0x68) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.846544] pnp 00:04: io resource (0x6c-0x6c) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.846549] pnp 00:04: io resource (0x70-0x70) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.846555] pnp 00:04: io resource (0x80-0x80) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.846560] pnp 00:04: io resource (0x92-0x92) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.846566] pnp 00:04: io resource (0xb2-0xb3) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.847953] pnp: PnP ACPI: found 9 devices
[ 0.847957] ACPI: ACPI bus type pnp unregistered
[ 0.847968] system 00:02: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.847977] system 00:04: ioport range 0x3e0-0x3e1 has been reserved
[ 0.847981] system 00:04: ioport range 0x400-0x47f has been reserved
[ 0.847986] system 00:04: ioport range 0x680-0x69f has been reserved
[ 0.847990] system 00:04: ioport range 0x480-0x48f has been reserved
[ 0.847994] system 00:04: ioport range 0xffff-0xffff has been reserved
[ 0.847999] system 00:04: ioport range 0xffff-0xffff has been reserved
[ 0.848003] system 00:04: ioport range 0x1180-0x11ff has been reserved
[ 0.848008] system 00:04: ioport range 0x164e-0x164f has been reserved
[ 0.848012] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
[ 0.848020] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.848025] system 00:08: iomem range 0xfed10000-0xfed13fff has been reserved
[ 0.848030] system 00:08: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.848034] system 00:08: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.848039] system 00:08: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.848043] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.848049] system 00:08: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.852867] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.852872] pci 0000:00:1c.0: IO window: disabled
[ 0.852879] pci 0000:00:1c.0: MEM window: disabled
[ 0.852886] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.852905] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07
[ 0.852910] pci 0000:00:1c.4: IO window: 0x2000-0x2fff
[ 0.852918] pci 0000:00:1c.4: MEM window: 0xb6000000-0xb60fffff
[ 0.852924] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.852942] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
[ 0.852945] pci 0000:00:1c.5: IO window: disabled
[ 0.852952] pci 0000:00:1c.5: MEM window: 0xb6100000-0xb61fffff
[ 0.852958] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.852965] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 0.852969] pci 0000:00:1e.0: IO window: disabled
[ 0.852976] pci 0000:00:1e.0: MEM window: 0xf4700000-0xf47fffff
[ 0.852982] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.852996] alloc irq_desc for 17 on node 0
[ 0.852998] alloc kstat_irqs on node 0
[ 0.853003] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.853012] pci 0000:00:1c.0: setting latency timer to 64
[ 0.853020] pci 0000:00:1c.4: enabling device (0000 -> 0003)
[ 0.853026] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.853034] pci 0000:00:1c.4: setting latency timer to 64
[ 0.853042] pci 0000:00:1c.5: enabling device (0000 -> 0002)
[ 0.853047] alloc irq_desc for 16 on node 0
[ 0.853048] alloc kstat_irqs on node 0
[ 0.853051] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.853059] pci 0000:00:1c.5: setting latency timer to 64
[ 0.853067] pci 0000:00:1e.0: setting latency timer to 64
[ 0.853071] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.853073] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.853076] pci_bus 0000:02: resource 0 mem: [0x0-0xfff]
[ 0.853077] pci_bus 0000:02: resource 1 mem: [0x0-0xfffff]
[ 0.853079] pci_bus 0000:02: resource 2 mem: [0x0-0xfffff]
[ 0.853081] pci_bus 0000:07: resource 0 io: [0x2000-0x2fff]
[ 0.853083] pci_bus 0000:07: resource 1 mem: [0xb6000000-0xb60fffff]
[ 0.853085] pci_bus 0000:07: resource 2 mem: [0x0-0xfffff]
[ 0.853087] pci_bus 0000:08: resource 0 mem: [0x0-0xfff]
[ 0.853089] pci_bus 0000:08: resource 1 mem: [0xb6100000-0xb61fffff]
[ 0.853091] pci_bus 0000:08: resource 2 mem: [0x0-0xfffff]
[ 0.853094] pci_bus 0000:0a: resource 1 mem: [0xf4700000-0xf47fffff]
[ 0.853096] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
[ 0.853098] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.853157] NET: Registered protocol family 2
[ 0.853332] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.854449] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.858108] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.858603] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.858608] TCP reno registered
[ 0.858765] NET: Registered protocol family 1
[ 0.858834] Unpacking initramfs...
[ 0.944033] Freeing initrd memory: 5468k freed
[ 0.946049] Simple Boot Flag at 0x36 set to 0x1
[ 0.946370] Scanning for low memory corruption every 60 seconds
[ 0.946576] audit: initializing netlink socket (disabled)
[ 0.946595] type=2000 audit(1249686912.946:1): initialized
[ 0.949690] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.949818] VFS: Disk quotas dquot_6.5.2
[ 0.949855] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.950001] msgmni has been set to 1899
[ 0.950223] alg: No test for stdrng (krng)
[ 0.950261] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.950267] io scheduler noop registered
[ 0.950270] io scheduler anticipatory registered
[ 0.950273] io scheduler deadline registered
[ 0.950294] io scheduler cfq registered (default)
[ 0.950360] pci 0000:00:02.0: Boot video device
[ 0.950662] alloc irq_desc for 24 on node 0
[ 0.950664] alloc kstat_irqs on node 0
[ 0.950677] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.950688] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.950856] alloc irq_desc for 25 on node 0
[ 0.950858] alloc kstat_irqs on node 0
[ 0.950866] pcieport-driver 0000:00:1c.4: irq 25 for MSI/MSI-X
[ 0.950876] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.951040] alloc irq_desc for 26 on node 0
[ 0.951042] alloc kstat_irqs on node 0
[ 0.951050] pcieport-driver 0000:00:1c.5: irq 26 for MSI/MSI-X
[ 0.951061] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.951491] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011100000, using 6144k, total 131008k
[ 0.951497] vesafb: mode is 1024x768x16, linelength=2048, pages=84
[ 0.951501] vesafb: scrolling: redraw
[ 0.951505] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.951678] bootsplash 3.1.6-2004/03/31: looking for picture...
[ 0.960651] bootsplash: silentjpeg size 100719 bytes
[ 0.971563] bootsplash: ...found (1024x768, 38691 bytes, v3).
[ 1.003477] Console: switching to colour frame buffer device 124x44
[ 1.047157] fb0: VESA VGA frame buffer device
[ 1.048776] Non-volatile memory driver v1.3
[ 1.048874] Linux agpgart interface v0.103
[ 1.048969] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.049340] Platform driver 'serial8250' needs updating - please use dev_pm_ops
[ 1.049757] ahci 0000:00:1f.2: version 3.0
[ 1.049774] alloc irq_desc for 19 on node 0
[ 1.049776] alloc kstat_irqs on node 0
[ 1.049784] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.049976] alloc irq_desc for 27 on node 0
[ 1.049978] alloc kstat_irqs on node 0
[ 1.049988] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 1.050079] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.050266] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems
[ 1.050436] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.056048] scsi0 : ahci
[ 1.056205] scsi1 : ahci
[ 1.056312] scsi2 : ahci
[ 1.056415] scsi3 : ahci
[ 1.056519] scsi4 : ahci
[ 1.056624] scsi5 : ahci
[ 1.056824] ata1: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04100 irq 27
[ 1.056995] ata2: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04180 irq 27
[ 1.057169] ata3: DUMMY
[ 1.057226] ata4: DUMMY
[ 1.057284] ata5: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04300 irq 27
[ 1.059192] ata6: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04380 irq 27
[ 1.061181] Fixed MDIO Bus: probed
[ 1.063134] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.065311] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1.067581] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.067584] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.069905] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.076248] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.078700] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.078713] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf4a04800
[ 1.091009] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.093624] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.096353] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.099176] usb usb1: Product: EHCI Host Controller
[ 1.102058] usb usb1: Manufacturer: Linux 2.6.31-rc5-git3-13-desktop ehci_hcd
[ 1.105106] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.108274] usb usb1: configuration #1 chosen from 1 choice
[ 1.111492] hub 1-0:1.0: USB hub found
[ 1.114741] hub 1-0:1.0: 6 ports detected
[ 1.119266] alloc irq_desc for 23 on node 0
[ 1.119268] alloc kstat_irqs on node 0
[ 1.119273] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.122755] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.122759] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.126273] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.133818] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.137485] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.137501] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4a04c00
[ 1.151010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.154820] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.158643] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.162452] usb usb2: Product: EHCI Host Controller
[ 1.166258] usb usb2: Manufacturer: Linux 2.6.31-rc5-git3-13-desktop ehci_hcd
[ 1.170161] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.174067] usb usb2: configuration #1 chosen from 1 choice
[ 1.177902] hub 2-0:1.0: USB hub found
[ 1.181634] hub 2-0:1.0: 6 ports detected
[ 1.185359] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.189078] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.192811] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.196626] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.196630] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.200472] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.204471] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 1.208510] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.212655] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.216777] usb usb3: Product: UHCI Host Controller
[ 1.220974] usb usb3: Manufacturer: Linux 2.6.31-rc5-git3-13-desktop uhci_hcd
[ 1.225192] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.229502] usb usb3: configuration #1 chosen from 1 choice
[ 1.233765] hub 3-0:1.0: USB hub found
[ 1.238045] hub 3-0:1.0: 2 ports detected
[ 1.243262] alloc irq_desc for 21 on node 0
[ 1.243265] alloc kstat_irqs on node 0
[ 1.243269] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.247543] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.247546] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.251741] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.256020] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 1.260257] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.264527] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.268840] usb usb4: Product: UHCI Host Controller
[ 1.273156] usb usb4: Manufacturer: Linux 2.6.31-rc5-git3-13-desktop uhci_hcd
[ 1.277510] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.281874] usb usb4: configuration #1 chosen from 1 choice
[ 1.286222] hub 4-0:1.0: USB hub found
[ 1.290461] hub 4-0:1.0: 2 ports detected
[ 1.294701] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1.298989] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.298992] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.303227] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.307579] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[ 1.311873] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.316202] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.320562] usb usb5: Product: UHCI Host Controller
[ 1.324876] usb usb5: Manufacturer: Linux 2.6.31-rc5-git3-13-desktop uhci_hcd
[ 1.329295] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.333764] usb usb5: configuration #1 chosen from 1 choice
[ 1.338181] hub 5-0:1.0: USB hub found
[ 1.342561] hub 5-0:1.0: 2 ports detected
[ 1.346913] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.351278] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.351282] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.355581] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.359956] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 1.364298] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.368719] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.373277] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.373351] usb usb6: Product: UHCI Host Controller
[ 1.373352] usb usb6: Manufacturer: Linux 2.6.31-rc5-git3-13-desktop uhci_hcd
[ 1.373354] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.373406] usb usb6: configuration #1 chosen from 1 choice
[ 1.373438] hub 6-0:1.0: USB hub found
[ 1.373444] hub 6-0:1.0: 2 ports detected
[ 1.404049] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.408375] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.412599] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.416835] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.417718] ACPI Warning: \_SB_.PCI0.SAT0.PRT0._GTF: Return type mismatch - found Integer, expected Buffer 20090521 nspredef-940
[ 1.417725] ata1.00: _GTF unexpected object type 0x1
[ 1.434519] ata2.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.50, max UDMA/33
[ 1.434522] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.434539] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.434542] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.434552] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.434583] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 1.434619] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.434621] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.434622] usb usb7: Product: UHCI Host Controller
[ 1.434624] usb usb7: Manufacturer: Linux 2.6.31-rc5-git3-13-desktop uhci_hcd
[ 1.434625] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.434689] usb usb7: configuration #1 chosen from 1 choice
[ 1.434713] hub 7-0:1.0: USB hub found
[ 1.434718] hub 7-0:1.0: 2 ports detected
[ 1.454194] ata1.00: ATA-8: TOSHIBA MK3252GSX, LV010M, max UDMA/100
[ 1.454196] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.502931] alloc irq_desc for 18 on node 0
[ 1.502933] alloc kstat_irqs on node 0
[ 1.502938] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.503763] ata1.00: _GTF unexpected object type 0x1
[ 1.505439] ata1.00: configured for UDMA/100
[ 1.505545] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5
[ 1.505705] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.505746] sd 0:0:0:0: [sda] Write Protect is off
[ 1.505748] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.505769] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.505884] sda:
[ 1.505936] ata2.00: configured for UDMA/33
[ 1.544577] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.544580] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.549286] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4
[ 1.549289] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.549327] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 1.549365] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.549366] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.549368] usb usb8: Product: UHCI Host Controller
[ 1.549369] usb usb8: Manufacturer: Linux 2.6.31-rc5-git3-13-desktop uhci_hcd
[ 1.549371] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.549431] usb usb8: configuration #1 chosen from 1 choice
[ 1.549455] hub 8-0:1.0: USB hub found
[ 1.549463] hub 8-0:1.0: 2 ports detected
[ 1.559520] sda1 sda2
[ 1.566029] Initializing USB Mass Storage driver...
[ 1.566068] usbcore: registered new interface driver usb-storage
[ 1.566070] USB Mass Storage support registered.
[ 1.566104] usbcore: registered new interface driver libusual
[ 1.566115] usbcore: registered new interface driver ums-alauda
[ 1.566125] usbcore: registered new interface driver ums-cypress
[ 1.566136] usbcore: registered new interface driver ums-datafab
[ 1.566146] usbcore: registered new interface driver ums-freecom
[ 1.566158] usbcore: registered new interface driver ums-isd200
[ 1.566168] usbcore: registered new interface driver ums-jumpshot
[ 1.566177] usbcore: registered new interface driver ums-karma
[ 1.566188] usbcore: registered new interface driver ums-onetouch
[ 1.566198] usbcore: registered new interface driver ums-sddr09
[ 1.566208] usbcore: registered new interface driver ums-sddr55
[ 1.566218] usbcore: registered new interface driver ums-usbat
[ 1.566258] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.566269] Platform driver 'i8042' needs updating - please use dev_pm_ops
[ 1.568639] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.570912] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.570917] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.570920] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.570922] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.570924] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.570987] mice: PS/2 mouse device common for all mice
[ 1.571095] rtc_cmos 00:05: RTC can wake from S4
[ 1.571132] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.571164] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.571174] cpuidle: using governor ladder
[ 1.571176] cpuidle: using governor menu
[ 1.571401] usbcore: registered new interface driver hiddev
[ 1.571414] usbcore: registered new interface driver usbhid
[ 1.571416] usbhid: v2.6:USB HID core driver
[ 1.727963] TCP cubic registered
[ 1.731058] NET: Registered protocol family 10
[ 1.734489] lo: Disabled Privacy Extensions
[ 1.737769] lib80211: common routines for IEEE802.11 drivers
[ 1.740811] lib80211_crypt: registered algorithm 'NULL'
[ 1.740897] PM: Checking image partition /dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1
[ 1.741136] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.744169] ata2: irq_stat 0x40000001
[ 1.747133] ata2: hard resetting link
[ 1.755909] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.760433] usb 1-1: New USB device found, idVendor=05e3, idProduct=0606
[ 1.763572] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.766770] usb 1-1: Product: USB2.0 Hub
[ 1.769992] usb 1-1: configuration #1 chosen from 1 choice
[ 1.773458] hub 1-1:1.0: USB hub found
[ 1.776935] hub 1-1:1.0: 4 ports detected
[ 1.935012] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 2.193148] usb 2-1: New USB device found, idVendor=07d1, idProduct=3c03
[ 2.196409] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.199750] usb 2-1: Product: 802.11 bg WLAN
[ 2.203116] usb 2-1: Manufacturer: Ralink
[ 2.206565] usb 2-1: configuration #1 chosen from 1 choice
[ 2.312016] usb 2-4: new high speed USB device using ehci_hcd and address 3
[ 2.443953] usb 2-4: New USB device found, idVendor=04f2, idProduct=b008
[ 2.447658] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.451434] usb 2-4: Product: Chicony USB 2.0 Camera
[ 2.455332] usb 2-4: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.459245] usb 2-4: SerialNumber: SN0001
[ 2.463227] usb 2-4: configuration #1 chosen from 1 choice
[ 2.473269] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.480889] ata2.00: configured for UDMA/33
[ 2.486254] ata2: EH complete
[ 2.502762] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862AS 1.50 PQ: 0 ANSI: 5
[ 2.506840] PM: Resume from disk failed.
[ 2.506856] registered taskstats version 1
[ 2.510920] Magic number: 5:697:301
[ 2.514948] tty tty30: hash matches
[ 2.519057] rtc_cmos 00:05: setting system clock to 2009-08-07 23:15:15 UTC (1249686915)
[ 2.523343] Freeing unused kernel memory: 1004k freed
[ 2.527793] Write protecting the kernel read-only data: 8848k
[ 2.573378] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
[ 2.588181] udevd version 128 started
[ 2.622150] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1e0b1, caps: 0xd04711/0xa00000
[ 2.660391] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
[ 2.681029] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 2.848867] usb 3-2: New USB device found, idVendor=046d, idProduct=c50a
[ 2.853513] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.858086] usb 3-2: Product: USB Receiver
[ 2.862653] usb 3-2: Manufacturer: Logitech
[ 2.867231] usb 3-2: configuration #1 chosen from 1 choice
[ 2.891171] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2
[ 2.896005] generic-usb 0003:046D:C50A.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-2/input0
[ 2.953569] PM: Marking nosave pages: 0000000000001000 - 0000000000006000
[ 2.953572] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 2.953576] PM: Marking nosave pages: 00000000b5aa1000 - 00000000b5aa7000
[ 2.953579] PM: Marking nosave pages: 00000000b5bba000 - 00000000b5c0f000
[ 2.953582] PM: Marking nosave pages: 00000000b5d08000 - 00000000b5f0f000
[ 2.953596] PM: Marking nosave pages: 00000000b5f18000 - 00000000b5f1f000
[ 2.953598] PM: Marking nosave pages: 00000000b5f65000 - 00000000b5f9f000
[ 2.953601] PM: Marking nosave pages: 00000000b5fe1000 - 00000000b5fff000
[ 2.953604] PM: Marking nosave pages: 00000000b6000000 - 0000000100000000
[ 2.955202] PM: Basic memory bitmaps created
[ 2.971913] PM: Basic memory bitmaps freed
[ 2.977495] PM: Starting manual resume from disk
[ 2.977497] PM: Resume from partition 8:1
[ 2.977498] PM: Checking hibernation image.
[ 2.977717] PM: Resume from disk failed.
[ 2.980590] usb 1-1.1: new high speed USB device using ehci_hcd and address 4
[ 3.097353] usb 1-1.1: New USB device found, idVendor=059b, idProduct=0370
[ 3.102941] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 3.108529] usb 1-1.1: Product: External HD
[ 3.114077] usb 1-1.1: Manufacturer: Iomega
[ 3.119592] usb 1-1.1: SerialNumber: 152000000733
[ 3.125171] usb 1-1.1: configuration #1 chosen from 1 choice
[ 3.132313] scsi6 : SCSI emulation for USB Mass Storage devices
[ 3.138694] usb-storage: device found at 4
[ 3.138697] usb-storage: waiting for device to settle before scanning
[ 3.202253] usb 1-1.2: new high speed USB device using ehci_hcd and address 5
[ 3.294394] usb 1-1.2: New USB device found, idVendor=1058, idProduct=1001
[ 3.299944] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.305518] usb 1-1.2: Product: External HDD
[ 3.311087] usb 1-1.2: Manufacturer: Western Digital
[ 3.316594] usb 1-1.2: SerialNumber: 574341505732323139323037
[ 3.322115] usb 1-1.2: configuration #1 chosen from 1 choice
[ 3.327728] scsi7 : SCSI emulation for USB Mass Storage devices
[ 3.335092] usb-storage: device found at 5
[ 3.335096] usb-storage: waiting for device to settle before scanning
[ 3.398292] usb 1-1.4: new high speed USB device using ehci_hcd and address 6
[ 3.487417] kjournald starting. Commit interval 15 seconds
[ 3.493471] EXT3 FS on sda2, internal journal
[ 3.499331] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.505811] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0606
[ 3.511654] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.517449] usb 1-1.4: Product: USB2.0 Hub
[ 3.523241] usb 1-1.4: configuration #1 chosen from 1 choice
[ 3.529365] hub 1-1.4:1.0: USB hub found
[ 3.535316] hub 1-1.4:1.0: 4 ports detected
[ 3.816260] usb 1-1.4.2: new high speed USB device using ehci_hcd and address 7
[ 3.901026] usb 1-1.4.2: New USB device found, idVendor=05e3, idProduct=070e
[ 3.906763] usb 1-1.4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 3.912396] usb 1-1.4.2: Product: USB Storage
[ 3.917839] usb 1-1.4.2: SerialNumber: 000000009601
[ 3.923251] usb 1-1.4.2: configuration #1 chosen from 1 choice
[ 3.929113] scsi8 : SCSI emulation for USB Mass Storage devices
[ 3.934363] usb-storage: device found at 7
[ 3.934365] usb-storage: waiting for device to settle before scanning
[ 4.007301] usb 1-1.4.3: new high speed USB device using ehci_hcd and address 8
[ 4.097941] usb 1-1.4.3: New USB device found, idVendor=03f0, idProduct=5611
[ 4.103090] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.108171] usb 1-1.4.3: Product: Photosmart C3100 series
[ 4.113203] usb 1-1.4.3: Manufacturer: HP
[ 4.118112] usb 1-1.4.3: SerialNumber: MY68SC52KM04P9
[ 4.123092] usb 1-1.4.3: configuration #1 chosen from 1 choice
[ 4.128279] scsi9 : SCSI emulation for USB Mass Storage devices
[ 4.133019] usb-storage: device found at 8
[ 4.133021] usb-storage: waiting for device to settle before scanning
[ 4.141850] scsi 6:0:0:0: Direct-Access ST336032 0AS PQ: 0 ANSI: 2
[ 4.147459] sd 6:0:0:0: [sdb] 703282608 512-byte logical blocks: (360 GB/335 GiB)
[ 4.147606] usb-storage: device scan complete
[ 4.154458] sd 6:0:0:0: [sdb] Write Protect is off
[ 4.159090] sd 6:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 4.159092] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 4.166961] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 4.171599] sdb:
[ 4.210344] usb 1-1.4.4: new high speed USB device using ehci_hcd and address 9
[ 4.334885] scsi 7:0:0:0: Direct-Access WD 5000AAJ External 1.06 PQ: 0 ANSI: 0
[ 4.340631] sd 7:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.346255] sd 7:0:0:0: [sdc] Write Protect is off
[ 4.350988] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 4.350990] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 4.351343] usb-storage: device scan complete
[ 4.357125] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 4.361786] sdc: sdc1
[ 4.368379] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 4.373105] usb 1-1.4.4: New USB device found, idVendor=0402, idProduct=5621
[ 4.377871] usb 1-1.4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 4.379256] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 4.387184] usb 1-1.4.4: Product: USB 2.0 Storage Device
[ 4.391683] usb 1-1.4.4: SerialNumber: 00042222200000014305
[ 4.396198] usb 1-1.4.4: configuration #1 chosen from 1 choice
[ 4.400831] scsi10 : SCSI emulation for USB Mass Storage devices
[ 4.405308] usb-storage: device found at 9
[ 4.405309] usb-storage: waiting for device to settle before scanning
[ 4.935143] scsi 8:0:0:0: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0
[ 4.940640] scsi 8:0:0:1: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0
[ 4.947134] scsi 8:0:0:2: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0
[ 4.952002] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[ 4.956887] sd 8:0:0:1: [sde] Attached SCSI removable disk
[ 4.962521] scsi 8:0:0:3: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0
[ 4.968607] sd 8:0:0:2: [sdf] Attached SCSI removable disk
[ 4.973274] sd 8:0:0:3: [sdg] Attached SCSI removable disk
[ 4.977676] usb-storage: device scan complete
[ 5.132685] scsi 9:0:0:0: Direct-Access HP Photosmart C3180 1.00 PQ: 0 ANSI: 2
[ 5.138803] usb-storage: device scan complete
[ 5.138945] sd 9:0:0:0: [sdh] Attached SCSI removable disk
[ 5.406120] scsi 10:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-W162C TS09 PQ: 0 ANSI: 0
[ 5.410805] usb-storage: device scan complete
[ 6.577369] sdb1
[ 6.585110] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6.589589] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 6.785886] udevd version 128 started
[ 7.353224] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.357860] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 7.362542] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 7.424051] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 7.428613] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 7.433196] sd 8:0:0:1: Attached scsi generic sg5 type 0
[ 7.437644] sd 8:0:0:2: Attached scsi generic sg6 type 0
[ 7.442086] sd 8:0:0:3: Attached scsi generic sg7 type 0
[ 7.446366] sd 9:0:0:0: Attached scsi generic sg8 type 0
[ 7.450695] scsi 10:0:0:0: Attached scsi generic sg9 type 5
[ 7.489366] usblp0: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5611
[ 7.493642] usbcore: registered new interface driver usblp
[ 7.520873] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 7.696713] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 7.701099] ACPI: Power Button [PWRF]
[ 7.702073] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 7.702076] Uniform CD-ROM driver Revision: 3.20
[ 7.702171] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 7.715315] iTCO_vendor_support: vendor-support=0
[ 7.715439] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 7.715511] ACPI: Power Button [PWRB]
[ 7.715556] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[ 7.715771] ACPI: Lid Switch [LID]
[ 7.745502] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 7.750494] sr 10:0:0:0: Attached scsi CD-ROM sr1
[ 7.765068] ACPI: WMI: Mapper loaded
[ 7.773302] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 7.778278] ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f]
[ 7.783444] ACPI: Device needs an ACPI driver
[ 7.788456] i801_smbus: probe of 0000:00:1f.3 failed with error -16
[ 7.798448] ACPI: AC Adapter [ACAD] (on-line)
[ 7.878413] sky2 driver version 1.23
[ 7.884402] sky2 0000:07:00.0: enabling device (0000 -> 0003)
[ 7.889483] sky2 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.894502] sky2 0000:07:00.0: setting latency timer to 64
[ 7.894555] sky2 0000:07:00.0: unsupported chip type 0xff
[ 7.899554] sky2 0000:07:00.0: PCI INT A disabled
[ 7.904379] sky2: probe of 0000:07:00.0 failed with error -95
[ 7.913789] ACPI: SSDT 00000000b5f1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 7.919838] ACPI: SSDT 00000000b5f18620 00594 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 7.927350] ACPI Warning: Invalid throttling state, reset 20090521 processor_throttling-843
[ 7.935721] Monitor-Mwait will be used to enter C-1 state
[ 7.937017] Monitor-Mwait will be used to enter C-2 state
[ 7.939037] Monitor-Mwait will be used to enter C-3 state
[ 7.939044] Marking TSC unstable due to TSC halts in idle
[ 7.944211] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 7.950115] processor LNXCPU:00: registered as cooling_device0
[ 7.955105] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 7.960757] ACPI: SSDT 00000000b5f19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20061109)
[ 7.966558] ACPI: SSDT 00000000b5f19f20 0008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 7.972375] ACPI Warning: Invalid throttling state, reset 20090521 processor_throttling-843
[ 7.978824] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 7.983940] processor LNXCPU:01: registered as cooling_device1
[ 7.988989] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 7.996325] cfg80211: Calling CRDA to update world regulatory domain
[ 8.065169] thermal LNXTHERM:01: registered as thermal_zone0
[ 8.070493] ACPI: Thermal Zone [THRM] (53 C)
[ 8.078533] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 8.084850] agpgart-intel 0000:00:00.0: detected 131068K stolen memory
[ 8.092440] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 8.389786] Linux video capture interface: v2.00
[ 8.399668] cfg80211: World regulatory domain updated:
[ 8.404999] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.410299] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.413705] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 8.420786] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 8.426635] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.500035] Clocksource tsc unstable (delta = -274372625 ns)
[ 8.524317] ACPI: Battery Slot [BAT1] (battery present)
[ 8.566601] sdhci: Secure Digital Host Controller Interface driver
[ 8.571769] sdhci: Copyright(c) Pierre Ossman
[ 8.599024] ohci1394 0000:0a:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.634749] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[ 8.644560] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input7
[ 8.650067] usbcore: registered new interface driver uvcvideo
[ 8.655220] USB Video Class driver (v0.1.0)
[ 8.661457] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[ff501000-ff5017ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 8.674920] sdhci-pci 0000:0a:01.2: SDHCI controller found [1217:7120] (rev 2)
[ 8.680754] sdhci-pci 0000:0a:01.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.686465] mmc0: Unknown controller version (2). You may experience problems.
[ 8.692107] Registered led device: mmc0::
[ 8.697860] mmc0: SDHCI controller on PCI [0000:0a:01.2] using DMA
[ 8.857709] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds
[ 8.863357] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 8.875763] iwlagn 0000:08:00.0: enabling device (0000 -> 0002)
[ 8.881477] iwlagn 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.887083] iwlagn 0000:08:00.0: setting latency timer to 64
[ 8.887128] iwlagn 0000:08:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0xFDFFFFFF
[ 8.892723] alloc irq_desc for 22 on node 0
[ 8.892726] alloc kstat_irqs on node 0
[ 8.892733] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8.898342] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.013211] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 9.019021] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 9.024613] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 9.073995] iwlagn 0000:08:00.0: Failed, HW not ready
[ 9.080292] iwlagn 0000:08:00.0: PCI INT A disabled
[ 9.103364] phy0: Selected rate control algorithm 'minstrel'
[ 9.103868] Registered led device: rt73usb-phy0::radio
[ 9.109388] Registered led device: rt73usb-phy0::assoc
[ 9.115034] Registered led device: rt73usb-phy0::quality
[ 9.120942] usbcore: registered new interface driver rt73usb
[ 9.128912] wlan0 renamed to wlan1 by udevd [1754]
[ 9.134740] udev: renamed network interface wlan0 to wlan1
[ 9.932990] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b240001542c7b]
[ 10.022653] Adding 4200956k swap on /dev/sda1. Priority:-1 extents:1 across:4200956k
[ 11.147966] device-mapper: uevent: version 1.0.3
[ 11.153623] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 11.558144] loop: module loaded
[ 11.786914] fuse init (API version 7.12)
[ 14.837032] type=1505 audit(1249683327.805:2): operation="profile_load" pid=2108 name=/bin/ping
[ 14.860303] type=1505 audit(1249683327.829:3): operation="profile_load" pid=2109 name=/sbin/klogd
[ 15.589761] type=1505 audit(1249683328.558:4): operation="profile_load" pid=2110 name=/sbin/syslog-ng
[ 15.655031] type=1505 audit(1249683328.623:5): operation="profile_load" pid=2111 name=/sbin/syslogd
[ 15.699478] type=1505 audit(1249683328.667:6): operation="profile_load" pid=2112 name=/usr/sbin/avahi-daemon
[ 15.739613] type=1505 audit(1249683328.708:7): operation="profile_load" pid=2113 name=/usr/sbin/identd
[ 15.781706] type=1505 audit(1249683328.749:8): operation="profile_load" pid=2114 name=/usr/sbin/mdnsd
[ 15.836617] type=1505 audit(1249683328.805:9): operation="profile_load" pid=2119 name=/usr/sbin/nscd
[ 15.899576] type=1505 audit(1249683328.867:10): operation="profile_load" pid=2146 name=/usr/sbin/ntpd
[ 15.954324] type=1505 audit(1249683328.923:11): operation="profile_load" pid=2153 name=/usr/sbin/traceroute
[ 32.914365] [drm] Initialized drm 1.1.0 20060810
[ 32.960780] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 32.960785] pci 0000:00:02.0: setting latency timer to 64
[ 32.975764] alloc irq_desc for 28 on node 0
[ 32.975768] alloc kstat_irqs on node 0
[ 32.975778] pci 0000:00:02.0: irq 28 for MSI/MSI-X
[ 33.039449] acpi device:05: registered as cooling_device2
[ 33.040015] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input11
[ 33.040140] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 33.040220] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 33.417008] CE: hpet increasing min_delta_ns to 15000 nsec
[ 36.846635] Bluetooth: Core ver 2.15
[ 36.847428] NET: Registered protocol family 31
[ 36.847431] Bluetooth: HCI device and connection manager initialized
[ 36.847434] Bluetooth: HCI socket layer initialized
[ 37.267318] Bluetooth: L2CAP ver 2.13
[ 37.267320] Bluetooth: L2CAP socket layer initialized
[ 37.385433] Bluetooth: RFCOMM TTY layer initialized
[ 37.385437] Bluetooth: RFCOMM socket layer initialized
[ 37.385439] Bluetooth: RFCOMM ver 1.11
[ 38.306519] Bluetooth: SCO (Voice Link) ver 0.6
[ 38.306527] Bluetooth: SCO socket layer initialized
[ 39.205272] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 39.205275] Bluetooth: BNEP filters: protocol multicast
[ 39.528399] Bridge firewalling registered
[ 46.515904] rt73usb 2-1:1.0: firmware: requesting rt73.bin
[ 47.368717] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 47.451725] NET: Registered protocol family 17
[ 48.201554] bootsplash: status on console 0 changed to on
[ 55.246915] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
[ 151.582393] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 155.806904] kjournald starting. Commit interval 15 seconds
[ 155.806926] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 155.808190] EXT3 FS on sdc1, internal journal
[ 155.808197] EXT3-fs: mounted filesystem with ordered data mode.
[ 155.947629] kjournald starting. Commit interval 15 seconds
[ 155.948751] EXT3 FS on sdb1, internal journal
[ 155.948766] EXT3-fs: mounted filesystem with ordered data mode.
[ 201.168353] usb 2-1: USB disconnect, address 2
[ 201.168746] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19.
[ 201.168756] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19.
[ 201.168766] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19.
[ 201.168775] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19.
[ 201.168785] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19.
[ 201.168802] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 201.168963] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 201.169026] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 201.169093] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 208.217129] usb 2-1: new high speed USB device using ehci_hcd and address 4
[ 208.473618] usb 2-1: New USB device found, idVendor=07d1, idProduct=3c03
[ 208.473628] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 208.473635] usb 2-1: Product: 802.11 bg WLAN
[ 208.473640] usb 2-1: Manufacturer: Ralink
[ 208.473901] usb 2-1: configuration #1 chosen from 1 choice
[ 208.738971] phy2: Selected rate control algorithm 'minstrel'
[ 208.740773] Registered led device: rt73usb-phy2::radio
[ 208.740822] Registered led device: rt73usb-phy2::assoc
[ 208.740860] Registered led device: rt73usb-phy2::quality
[ 208.744327] wlan0 renamed to wlan1 by udevd [4796]
[ 208.746238] udev: renamed network interface wlan0 to wlan1
[ 212.836842] rt73usb 2-1:1.0: firmware: requesting rt73.bin
[ 212.932183] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 270.352692] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 272.366404] wlan1: authenticate with AP 00:16:01:ad:e4:c0
[ 272.367987] wlan1: authenticated
[ 272.367995] wlan1: associate with AP 00:16:01:ad:e4:c0
[ 272.370404] wlan1: RX AssocResp from 00:16:01:ad:e4:c0 (capab=0x431 status=0 aid=1)
[ 272.370412] wlan1: associated
[ 272.390721] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 282.696064] wlan1: no IPv6 routers present
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Regression in ACPI in 2.6.31-rc5
2009-08-07 22:33 Ricardo Jorge da Fonseca Marques Ferreira
@ 2009-08-13 3:53 ` Len Brown
2009-08-16 3:00 ` Ricardo Jorge da Fonseca Marques Ferreira
0 siblings, 1 reply; 6+ messages in thread
From: Len Brown @ 2009-08-13 3:53 UTC (permalink / raw)
To: Ricardo Jorge da Fonseca Marques Ferreira; +Cc: linux-kernel, linux-acpi
> I had two drivers stop working in 2.6.31 that were working fine in 2.6.30.
> They are iwlagn and sky2. If i pass acpi=off to the kernel, they work as
> expected.
the bug report for this issue is here:
http://bugzilla.kernel.org/show_bug.cgi?id=13940
is it possible to bisect which commit between 2.6.30 and 2.6.31-rc5
caused this regression?
Please attach the dmesg from the working 2.6.30
and the acpi=off 2.6.31 to the bug report so i can compare
them to the failing 2.6.31
thanks,
Len Brown, Intel Open Source Technology Center
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Regression in ACPI in 2.6.31-rc5
@ 2009-08-14 19:36 Ricardo Jorge da Fonseca Marques Ferreira
0 siblings, 0 replies; 6+ messages in thread
From: Ricardo Jorge da Fonseca Marques Ferreira @ 2009-08-14 19:36 UTC (permalink / raw)
To: Len Brown; +Cc: linux-kernel, linux-acpi
[-- Attachment #1: Type: text/plain, Size: 797 bytes --]
Resending with the lists CCed.
On Thursday 13 August 2009, you wrote:
> > I had two drivers stop working in 2.6.31 that were working fine in
> > 2.6.30. They are iwlagn and sky2. If i pass acpi=off to the kernel, they
> > work as expected.
>
> the bug report for this issue is here:
> http://bugzilla.kernel.org/show_bug.cgi?id=13940
>
> is it possible to bisect which commit between 2.6.30 and 2.6.31-rc5
> caused this regression?
>
> Please attach the dmesg from the working 2.6.30
> and the acpi=off 2.6.31 to the bug report so i can compare
> them to the failing 2.6.31
All dmesgs are attached. I also checked and 2.6.31-rc1 already has the bug.
2.6.30.4 doesn't have the bug.
I'll have to look at some documentation on how to use git bisect. If you have
some links, please send.
Thanks
[-- Attachment #2: dmesg-working-2.6.31_acpi=off.log --]
[-- Type: text/x-log, Size: 56634 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-rc5-git3-10-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2009-08-05 22:36:33 +0200
[ 0.000000] Command line: root=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part2 repair=1 resume=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1 splash=silent elevator=cfq vga=0x317 acpi=off
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b5aa1000 (usable)
[ 0.000000] BIOS-e820: 00000000b5aa1000 - 00000000b5aa7000 (reserved)
[ 0.000000] BIOS-e820: 00000000b5aa7000 - 00000000b5bba000 (usable)
[ 0.000000] BIOS-e820: 00000000b5bba000 - 00000000b5c0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000b5c0f000 - 00000000b5d08000 (usable)
[ 0.000000] BIOS-e820: 00000000b5d08000 - 00000000b5f0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000b5f0f000 - 00000000b5f18000 (usable)
[ 0.000000] BIOS-e820: 00000000b5f18000 - 00000000b5f1f000 (reserved)
[ 0.000000] BIOS-e820: 00000000b5f1f000 - 00000000b5f65000 (usable)
[ 0.000000] BIOS-e820: 00000000b5f65000 - 00000000b5f9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b5f9f000 - 00000000b5fe1000 (usable)
[ 0.000000] BIOS-e820: 00000000b5fe1000 - 00000000b5fff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b5fff000 - 00000000b6000000 (usable)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000b7e00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xb6000 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f400 (usable)
[ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000b5aa1000 (usable)
[ 0.000000] modified: 00000000b5aa1000 - 00000000b5aa7000 (reserved)
[ 0.000000] modified: 00000000b5aa7000 - 00000000b5bba000 (usable)
[ 0.000000] modified: 00000000b5bba000 - 00000000b5c0f000 (reserved)
[ 0.000000] modified: 00000000b5c0f000 - 00000000b5d08000 (usable)
[ 0.000000] modified: 00000000b5d08000 - 00000000b5f0f000 (reserved)
[ 0.000000] modified: 00000000b5f0f000 - 00000000b5f18000 (usable)
[ 0.000000] modified: 00000000b5f18000 - 00000000b5f1f000 (reserved)
[ 0.000000] modified: 00000000b5f1f000 - 00000000b5f65000 (usable)
[ 0.000000] modified: 00000000b5f65000 - 00000000b5f9f000 (ACPI NVS)
[ 0.000000] modified: 00000000b5f9f000 - 00000000b5fe1000 (usable)
[ 0.000000] modified: 00000000b5fe1000 - 00000000b5fff000 (ACPI data)
[ 0.000000] modified: 00000000b5fff000 - 00000000b6000000 (usable)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000b6000000
[ 0.000000] 0000000000 - 00b6000000 page 2M
[ 0.000000] kernel direct mapping tables up to b6000000 @ 8000-c000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ a000-10000
[ 0.000000] RAMDISK: 37a98000 - 37fef362
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000000000b000 - 0000000000022fff]
[ 0.000000] bootmap [0000000000023000 - 000000000004afff] pages 28
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001c76630] TEXT DATA BSS ==> [0001000000 - 0001c76630]
[ 0.000000] #3 [0037a98000 - 0037fef362] RAMDISK ==> [0037a98000 - 0037fef362]
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
[ 0.000000] #5 [0001c77000 - 0001c771e4] BRK ==> [0001c77000 - 0001c771e4]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
[ 0.000000] found SMP MP-table at [ffff8800000f6f20] f6f20
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001e00000-ffff8800055fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[10] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000b5aa1
[ 0.000000] 0: 0x000b5aa7 -> 0x000b5bba
[ 0.000000] 0: 0x000b5c0f -> 0x000b5d08
[ 0.000000] 0: 0x000b5f0f -> 0x000b5f18
[ 0.000000] 0: 0x000b5f1f -> 0x000b5f65
[ 0.000000] 0: 0x000b5f9f -> 0x000b5fe1
[ 0.000000] 0: 0x000b5fff -> 0x000b6000
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1006809
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3836 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 726391 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: INTEL
[ 0.000000] MPTABLE: Product ID: MontavinaCRB
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #1
[ 0.000000] I/O APIC #2 Version 32 at 0xFEC00000.
[ 0.000000] Processors: 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b5aa1000 - 00000000b5aa7000
[ 0.000000] PM: Registered nosave memory: 00000000b5bba000 - 00000000b5c0f000
[ 0.000000] PM: Registered nosave memory: 00000000b5d08000 - 00000000b5f0f000
[ 0.000000] PM: Registered nosave memory: 00000000b5f18000 - 00000000b5f1f000
[ 0.000000] PM: Registered nosave memory: 00000000b5f65000 - 00000000b5f9f000
[ 0.000000] PM: Registered nosave memory: 00000000b5fe1000 - 00000000b5fff000
[ 0.000000] PM: Registered nosave memory: 00000000b6000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at b6000000 (gap: b6000000:4a000000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages at ffff88000564b000, static data 82912 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 988787
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part2 repair=1 resume=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1 splash=silent elevator=cfq vga=0x317 acpi=off
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff88000568c000 - ffff88000968c000
[ 0.000000] software IO TLB at phys 0x568c000 - 0x968c000
[ 0.000000] Memory: 3884988k/5242880k available (5578k kernel code, 1215644k absent, 142248k reserved, 4455k data, 1048k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2526.720 MHz processor.
[ 0.000084] Console: colour dummy device 80x25
[ 0.000086] console [tty0] enabled
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.44 BogoMIPS (lpj=10106880)
[ 0.011367] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
[ 0.011486] Security Framework initialized
[ 0.011508] AppArmor: AppArmor initialized
[ 0.011810] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.013827] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.015311] Mount-cache hash table entries: 256
[ 0.015476] Initializing cgroup subsys ns
[ 0.015483] Initializing cgroup subsys cpuacct
[ 0.015488] Initializing cgroup subsys memory
[ 0.015505] Initializing cgroup subsys devices
[ 0.015509] Initializing cgroup subsys freezer
[ 0.015512] Initializing cgroup subsys net_cls
[ 0.015541] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.015545] CPU: L2 cache: 3072K
[ 0.015550] CPU 0/0x0 -> Node 0
[ 0.015553] CPU: Physical Processor ID: 0
[ 0.015555] CPU: Processor Core ID: 0
[ 0.015560] mce: CPU supports 6 MCE banks
[ 0.015569] CPU0: Thermal monitoring enabled (TM2)
[ 0.015575] using mwait in idle threads.
[ 0.015577] Performance Counters: Core2 events, Intel PMU driver.
[ 0.015585] ... version: 2
[ 0.015588] ... bit width: 40
[ 0.015590] ... generic counters: 2
[ 0.015593] ... value mask: 000000ffffffffff
[ 0.015596] ... max period: 000000007fffffff
[ 0.015599] ... fixed-purpose counters: 3
[ 0.015601] ... counter mask: 0000000700000003
[ 0.017812] Setting APIC routing to flat
[ 0.017888] ExtINT not setup in hardware but reported by MP table
[ 0.018013] alloc irq_desc for 16 on node 0
[ 0.018015] alloc kstat_irqs on node 0
[ 0.018021] alloc irq_desc for 17 on node 0
[ 0.018022] alloc kstat_irqs on node 0
[ 0.018026] alloc irq_desc for 18 on node 0
[ 0.018027] alloc kstat_irqs on node 0
[ 0.018030] alloc irq_desc for 19 on node 0
[ 0.018031] alloc kstat_irqs on node 0
[ 0.018034] alloc irq_desc for 21 on node 0
[ 0.018036] alloc kstat_irqs on node 0
[ 0.018038] alloc irq_desc for 22 on node 0
[ 0.018039] alloc kstat_irqs on node 0
[ 0.018043] alloc irq_desc for 23 on node 0
[ 0.018044] alloc kstat_irqs on node 0
[ 0.018185] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.057882] CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
[ 0.164227] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5054.25 BogoMIPS (lpj=10108515)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU 1/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.253537] CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
[ 0.253564] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.256028] Brought up 2 CPUs
[ 0.256028] Total of 2 processors activated (10107.69 BogoMIPS).
[ 0.256093] CPU0 attaching sched-domain:
[ 0.256096] domain 0: span 0-1 level MC
[ 0.256098] groups: 0 1
[ 0.256103] CPU1 attaching sched-domain:
[ 0.256104] domain 0: span 0-1 level MC
[ 0.256106] groups: 1 0
[ 0.256160] devtmpfs: initialized
[ 0.261248] Booting paravirtualized kernel on bare hardware
[ 0.261249] regulator: core version 0.5
[ 0.261249] Time: 20:25:32 Date: 08/14/09
[ 0.261249] NET: Registered protocol family 16
[ 0.261249] PCI: Using configuration type 1 for base access
[ 0.261249] bio: create slab <bio-0> at 0
[ 0.261249] ACPI: Interpreter disabled.
[ 0.261249] SCSI subsystem initialized
[ 0.261249] libata version 3.00 loaded.
[ 0.261249] usbcore: registered new interface driver usbfs
[ 0.261249] usbcore: registered new interface driver hub
[ 0.261249] usbcore: registered new device driver usb
[ 0.261249] PCI: Probing PCI hardware
[ 0.261249] PCI: Probing PCI hardware (bus 00)
[ 0.261249] pci 0000:00:02.0: reg 10 64bit mmio: [0xf4000000-0xf43fffff]
[ 0.261249] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.261249] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
[ 0.261249] pci 0000:00:02.1: reg 10 64bit mmio: [0xf4400000-0xf44fffff]
[ 0.261249] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
[ 0.261249] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
[ 0.261249] pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f]
[ 0.261249] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf4a04800-0xf4a04bff]
[ 0.261249] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.261249] pci 0000:00:1a.7: PME# disabled
[ 0.261249] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4800000-0xf4803fff]
[ 0.261249] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.261249] pci 0000:00:1b.0: PME# disabled
[ 0.261249] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.261249] pci 0000:00:1c.0: PME# disabled
[ 0.261249] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.261249] pci 0000:00:1c.4: PME# disabled
[ 0.261249] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.261249] pci 0000:00:1c.5: PME# disabled
[ 0.261249] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f]
[ 0.261249] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf]
[ 0.261252] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df]
[ 0.261343] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4a04c00-0xf4a04fff]
[ 0.261408] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.261415] pci 0000:00:1d.7: PME# disabled
[ 0.261656] pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f]
[ 0.261663] pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f]
[ 0.261669] pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817]
[ 0.261677] pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b]
[ 0.261683] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
[ 0.261690] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf4a04000-0xf4a047ff]
[ 0.261735] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.261741] pci 0000:00:1f.2: PME# disabled
[ 0.261780] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff]
[ 0.261797] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
[ 0.261878] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.261882] pci 0000:00:1c.0: bridge 32bit mmio: [0xf2000000-0xf3ffffff]
[ 0.261890] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
[ 0.261960] pci 0000:07:00.0: reg 10 64bit mmio: [0xf4500000-0xf4503fff]
[ 0.261970] pci 0000:07:00.0: reg 18 io port: [0x3000-0x30ff]
[ 0.262049] pci 0000:07:00.0: supports D1 D2
[ 0.262051] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.262058] pci 0000:07:00.0: PME# disabled
[ 0.272117] pci 0000:00:1c.4: bridge io port: [0x3000-0x3fff]
[ 0.272122] pci 0000:00:1c.4: bridge 32bit mmio: [0xf4500000-0xf45fffff]
[ 0.272212] pci 0000:08:00.0: reg 10 64bit mmio: [0xf4600000-0xf4601fff]
[ 0.272321] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.272330] pci 0000:08:00.0: PME# disabled
[ 0.280128] pci 0000:00:1c.5: bridge 32bit mmio: [0xf4600000-0xf46fffff]
[ 0.280176] pci 0000:0a:01.0: reg 10 32bit mmio: [0xff501000-0xff501fff]
[ 0.280184] pci 0000:0a:01.0: reg 14 32bit mmio: [0xf4700000-0xf47007ff]
[ 0.280235] pci 0000:0a:01.0: supports D1 D2
[ 0.280236] pci 0000:0a:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.280243] pci 0000:0a:01.0: PME# disabled
[ 0.280290] pci 0000:0a:01.2: reg 10 32bit mmio: [0xf4700800-0xf47008ff]
[ 0.280355] pci 0000:0a:01.2: supports D1 D2
[ 0.280356] pci 0000:0a:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.280362] pci 0000:0a:01.2: PME# disabled
[ 0.280410] pci 0000:0a:01.3: reg 10 32bit mmio: [0xf4702000-0xf4702fff]
[ 0.280474] pci 0000:0a:01.3: supports D1 D2
[ 0.280476] pci 0000:0a:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.280482] pci 0000:0a:01.3: PME# disabled
[ 0.280548] pci 0000:00:1e.0: transparent bridge
[ 0.280557] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4700000-0xf47fffff]
[ 0.289085] AppArmor: AppArmor Filesystem Enabled
[ 0.289090] pnp: PnP ACPI: disabled
[ 0.290854] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.290854] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.290854] pci 0000:00:1c.0: MEM window: 0xf2000000-0xf3ffffff
[ 0.290854] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
[ 0.290854] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07
[ 0.290854] pci 0000:00:1c.4: IO window: 0x3000-0x3fff
[ 0.290854] pci 0000:00:1c.4: MEM window: 0xf4500000-0xf45fffff
[ 0.290854] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.290854] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
[ 0.290854] pci 0000:00:1c.5: IO window: disabled
[ 0.290854] pci 0000:00:1c.5: MEM window: 0xf4600000-0xf46fffff
[ 0.290854] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.290854] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 0.290854] pci 0000:00:1e.0: IO window: disabled
[ 0.290854] pci 0000:00:1e.0: MEM window: 0xf4700000-0xf47fffff
[ 0.290854] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.290854] pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 17
[ 0.290854] pci 0000:00:1c.0: setting latency timer to 64
[ 0.290854] pci 0000:00:1c.4: PCI->APIC IRQ transform: INT A -> IRQ 17
[ 0.290854] pci 0000:00:1c.4: setting latency timer to 64
[ 0.290854] pci 0000:00:1c.5: PCI->APIC IRQ transform: INT B -> IRQ 16
[ 0.290854] pci 0000:00:1c.5: setting latency timer to 64
[ 0.290854] pci 0000:00:1e.0: setting latency timer to 64
[ 0.290854] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.290854] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.290854] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.290854] pci_bus 0000:02: resource 1 mem: [0xf2000000-0xf3ffffff]
[ 0.290854] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff]
[ 0.290854] pci_bus 0000:07: resource 0 io: [0x3000-0x3fff]
[ 0.290854] pci_bus 0000:07: resource 1 mem: [0xf4500000-0xf45fffff]
[ 0.290854] pci_bus 0000:08: resource 1 mem: [0xf4600000-0xf46fffff]
[ 0.290854] pci_bus 0000:0a: resource 1 mem: [0xf4700000-0xf47fffff]
[ 0.290854] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
[ 0.290854] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.290854] NET: Registered protocol family 2
[ 0.290854] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.290854] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.296040] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.296536] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.296541] TCP reno registered
[ 0.296698] NET: Registered protocol family 1
[ 0.296765] Unpacking initramfs...
[ 0.381220] Freeing initrd memory: 5468k freed
[ 0.383275] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.383555] Scanning for low memory corruption every 60 seconds
[ 0.383751] audit: initializing netlink socket (disabled)
[ 0.383769] type=2000 audit(1250281532.380:1): initialized
[ 0.390761] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.390886] VFS: Disk quotas dquot_6.5.2
[ 0.390921] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.391056] msgmni has been set to 1899
[ 0.391272] alg: No test for stdrng (krng)
[ 0.391301] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.391307] io scheduler noop registered
[ 0.391309] io scheduler anticipatory registered
[ 0.391313] io scheduler deadline registered
[ 0.391331] io scheduler cfq registered (default)
[ 0.391399] pci 0000:00:02.0: Boot video device
[ 0.413827] alloc irq_desc for 24 on node 0
[ 0.413829] alloc kstat_irqs on node 0
[ 0.413841] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.413852] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.414004] alloc irq_desc for 25 on node 0
[ 0.414006] alloc kstat_irqs on node 0
[ 0.414014] pcieport-driver 0000:00:1c.4: irq 25 for MSI/MSI-X
[ 0.414025] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.414172] alloc irq_desc for 26 on node 0
[ 0.414173] alloc kstat_irqs on node 0
[ 0.414182] pcieport-driver 0000:00:1c.5: irq 26 for MSI/MSI-X
[ 0.414192] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.414583] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001080000, using 6144k, total 131008k
[ 0.414589] vesafb: mode is 1024x768x16, linelength=2048, pages=84
[ 0.414593] vesafb: scrolling: redraw
[ 0.414596] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.414755] bootsplash 3.1.6-2004/03/31: looking for picture...
[ 0.423710] bootsplash: silentjpeg size 100719 bytes
[ 0.434575] bootsplash: ...found (1024x768, 38691 bytes, v3).
[ 0.466387] Console: switching to colour frame buffer device 124x44
[ 0.509984] fb0: VESA VGA frame buffer device
[ 0.511270] Non-volatile memory driver v1.3
[ 0.511368] Linux agpgart interface v0.103
[ 0.511462] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.511808] Platform driver 'serial8250' needs updating - please use dev_pm_ops
[ 0.512117] ahci 0000:00:1f.2: version 3.0
[ 0.512138] ahci 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19
[ 0.512351] alloc irq_desc for 27 on node 0
[ 0.512353] alloc kstat_irqs on node 0
[ 0.512363] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 0.512441] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.512628] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems
[ 0.512797] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.536087] scsi0 : ahci
[ 0.536246] scsi1 : ahci
[ 0.536348] scsi2 : ahci
[ 0.536451] scsi3 : ahci
[ 0.536554] scsi4 : ahci
[ 0.536657] scsi5 : ahci
[ 0.536746] ata1: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04100 irq 27
[ 0.536917] ata2: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04180 irq 27
[ 0.537085] ata3: DUMMY
[ 0.537142] ata4: DUMMY
[ 0.537200] ata5: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04300 irq 27
[ 0.539097] ata6: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04380 irq 27
[ 0.541075] Fixed MDIO Bus: probed
[ 0.543020] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.545193] ehci_hcd 0000:00:1a.7: PCI->APIC IRQ transform: INT C -> IRQ 19
[ 0.547438] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.547441] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.549745] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.556057] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.558482] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.558497] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf4a04800
[ 0.576050] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.578626] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.581333] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.584135] usb usb1: Product: EHCI Host Controller
[ 0.586989] usb usb1: Manufacturer: Linux 2.6.31-rc5-git3-10-default ehci_hcd
[ 0.590010] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.593148] usb usb1: configuration #1 chosen from 1 choice
[ 0.596343] hub 1-0:1.0: USB hub found
[ 0.599555] hub 1-0:1.0: 6 ports detected
[ 0.602900] ehci_hcd 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23
[ 0.606350] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.606353] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.609832] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.617341] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.620975] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.620990] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4a04c00
[ 0.640061] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.643839] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.647634] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.651409] usb usb2: Product: EHCI Host Controller
[ 0.655178] usb usb2: Manufacturer: Linux 2.6.31-rc5-git3-10-default ehci_hcd
[ 0.659044] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.662911] usb usb2: configuration #1 chosen from 1 choice
[ 0.666715] hub 2-0:1.0: USB hub found
[ 0.670418] hub 2-0:1.0: 6 ports detected
[ 0.674116] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.677810] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.681516] uhci_hcd 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 0.685290] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.685293] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.689094] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.693045] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 0.697038] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.701140] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.705217] usb usb3: Product: UHCI Host Controller
[ 0.709342] usb usb3: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd
[ 0.713512] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.717775] usb usb3: configuration #1 chosen from 1 choice
[ 0.721989] hub 3-0:1.0: USB hub found
[ 0.726226] hub 3-0:1.0: 2 ports detected
[ 0.730455] uhci_hcd 0000:00:1a.1: PCI->APIC IRQ transform: INT B -> IRQ 21
[ 0.734682] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.734685] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.738837] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.743074] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 0.747279] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.751510] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.755787] usb usb4: Product: UHCI Host Controller
[ 0.760069] usb usb4: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd
[ 0.764389] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.768717] usb usb4: configuration #1 chosen from 1 choice
[ 0.773002] hub 4-0:1.0: USB hub found
[ 0.777211] hub 4-0:1.0: 2 ports detected
[ 0.781424] uhci_hcd 0000:00:1a.2: PCI->APIC IRQ transform: INT C -> IRQ 19
[ 0.785680] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.785683] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.789884] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.794198] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[ 0.798452] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.802747] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.807056] usb usb5: Product: UHCI Host Controller
[ 0.811338] usb usb5: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd
[ 0.815729] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.820178] usb usb5: configuration #1 chosen from 1 choice
[ 0.824566] hub 5-0:1.0: USB hub found
[ 0.828897] hub 5-0:1.0: 2 ports detected
[ 0.833217] uhci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
[ 0.837552] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.837555] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.841819] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.846160] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 0.850469] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.854856] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.859234] usb usb6: Product: UHCI Host Controller
[ 0.863583] usb usb6: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd
[ 0.867989] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.872416] usb usb6: configuration #1 chosen from 1 choice
[ 0.876831] hub 6-0:1.0: USB hub found
[ 0.877703] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.885593] hub 6-0:1.0: 2 ports detected
[ 0.890042] uhci_hcd 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
[ 0.894484] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.894487] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.898847] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.903253] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 0.905692] ata5: SATA link down (SStatus 0 SControl 300)
[ 0.905717] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.905735] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.907385] ata2.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.50, max UDMA/33
[ 0.925177] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.926136] ata1.00: ATA-8: TOSHIBA MK3252GSX, LV010M, max UDMA/100
[ 0.926138] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 0.926824] ata2.00: configured for UDMA/33
[ 0.928145] ata1.00: configured for UDMA/100
[ 0.928248] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5
[ 0.928403] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 0.928443] sd 0:0:0:0: [sda] Write Protect is off
[ 0.928445] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.928466] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.928581] sda:
[ 0.965153] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.965162] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4
[ 0.965164] ata2: irq_stat 0x40000001
[ 0.965168] ata2: hard resetting link
[ 0.975873] sda1 sda2
[ 0.992282] usb usb7: Product: UHCI Host Controller
[ 0.996782] usb usb7: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd
[ 0.996876] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.005742] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.010234] usb usb7: configuration #1 chosen from 1 choice
[ 1.014717] hub 7-0:1.0: USB hub found
[ 1.019139] hub 7-0:1.0: 2 ports detected
[ 1.023647] uhci_hcd 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18
[ 1.028150] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.028154] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.032613] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.037147] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 1.041641] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.046128] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.050622] usb usb8: Product: UHCI Host Controller
[ 1.055065] usb usb8: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd
[ 1.059555] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.064041] usb usb8: configuration #1 chosen from 1 choice
[ 1.068523] hub 8-0:1.0: USB hub found
[ 1.072948] hub 8-0:1.0: 2 ports detected
[ 1.077358] Initializing USB Mass Storage driver...
[ 1.081746] usbcore: registered new interface driver usb-storage
[ 1.086105] USB Mass Storage support registered.
[ 1.090491] usbcore: registered new interface driver libusual
[ 1.094894] usbcore: registered new interface driver ums-alauda
[ 1.099237] usbcore: registered new interface driver ums-cypress
[ 1.103505] usbcore: registered new interface driver ums-datafab
[ 1.107721] usbcore: registered new interface driver ums-freecom
[ 1.111885] usbcore: registered new interface driver ums-isd200
[ 1.115967] usbcore: registered new interface driver ums-jumpshot
[ 1.119957] usbcore: registered new interface driver ums-karma
[ 1.123839] usbcore: registered new interface driver ums-onetouch
[ 1.127650] usbcore: registered new interface driver ums-sddr09
[ 1.131381] usbcore: registered new interface driver ums-sddr55
[ 1.132140] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.138858] usbcore: registered new interface driver ums-usbat
[ 1.142571] PNP: No PS/2 controller found. Probing ports directly.
[ 1.146288] Platform driver 'i8042' needs updating - please use dev_pm_ops
[ 1.152366] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.157532] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.161187] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.164786] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.168307] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.171799] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.175313] mice: PS/2 mouse device common for all mice
[ 1.178888] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.182417] rtc0: alarms up to one day, 114 bytes nvram
[ 1.185869] cpuidle: using governor ladder
[ 1.189284] cpuidle: using governor menu
[ 1.192885] usbcore: registered new interface driver hiddev
[ 1.196295] usbcore: registered new interface driver usbhid
[ 1.199677] usbhid: v2.6:USB HID core driver
[ 1.208031] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.269354] usb 1-1: New USB device found, idVendor=05e3, idProduct=0606
[ 1.272913] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.276477] usb 1-1: Product: USB2.0 Hub
[ 1.280001] usb 1-1: configuration #1 chosen from 1 choice
[ 1.283776] TCP cubic registered
[ 1.284225] hub 1-1:1.0: USB hub found
[ 1.284486] hub 1-1:1.0: 4 ports detected
[ 1.293937] NET: Registered protocol family 10
[ 1.297634] lo: Disabled Privacy Extensions
[ 1.301212] lib80211: common routines for IEEE802.11 drivers
[ 1.304630] lib80211_crypt: registered algorithm 'NULL'
[ 1.304718] PM: Checking image partition /dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1
[ 1.373750] Clocksource tsc unstable (delta = 105053647 ns)
[ 1.468179] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 1.744920] usb 2-1: New USB device found, idVendor=07d1, idProduct=3c03
[ 1.748174] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.751629] usb 2-1: Product: 802.11 bg WLAN
[ 1.752222] usb 2-1: Manufacturer: Ralink
[ 1.756229] usb 2-1: configuration #1 chosen from 1 choice
[ 1.816191] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.825145] ata2.00: configured for UDMA/33
[ 1.828490] ata2: EH complete
[ 1.849188] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862AS 1.50 PQ: 0 ANSI: 5
[ 1.872180] usb 2-4: new high speed USB device using ehci_hcd and address 3
[ 2.020659] usb 2-4: New USB device found, idVendor=04f2, idProduct=b008
[ 2.024179] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.028174] usb 2-4: Product: Chicony USB 2.0 Camera
[ 2.032186] usb 2-4: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.036179] usb 2-4: SerialNumber: SN0001
[ 2.040227] usb 2-4: configuration #1 chosen from 1 choice
[ 2.061781] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1e0b1, caps: 0xd04711/0xa00000
[ 2.100172] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
[ 2.107764] PM: Resume from disk failed.
[ 2.107764] registered taskstats version 1
[ 2.108284] Magic number: 5:560:447
[ 2.116240] rtc_cmos rtc_cmos: setting system clock to 2009-08-14 20:25:34 UTC (1250281534)
[ 2.120250] Freeing unused kernel memory: 1048k freed
[ 2.124417] Write protecting the kernel read-only data: 8880k
[ 2.172834] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
[ 2.200730] udevd version 128 started
[ 2.304751] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 2.488063] usb 3-2: New USB device found, idVendor=046d, idProduct=c50a
[ 2.488180] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.492175] usb 3-2: Product: USB Receiver
[ 2.496184] usb 3-2: Manufacturer: Logitech
[ 2.500267] usb 3-2: configuration #1 chosen from 1 choice
[ 2.526352] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2
[ 2.532292] generic-usb 0003:046D:C50A.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-2/input0
[ 2.582500] PM: Marking nosave pages: 0000000000001000 - 0000000000006000
[ 2.582504] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 2.582508] PM: Marking nosave pages: 00000000b5aa1000 - 00000000b5aa7000
[ 2.582510] PM: Marking nosave pages: 00000000b5bba000 - 00000000b5c0f000
[ 2.582514] PM: Marking nosave pages: 00000000b5d08000 - 00000000b5f0f000
[ 2.582528] PM: Marking nosave pages: 00000000b5f18000 - 00000000b5f1f000
[ 2.582530] PM: Marking nosave pages: 00000000b5f65000 - 00000000b5f9f000
[ 2.582533] PM: Marking nosave pages: 00000000b5fe1000 - 00000000b5fff000
[ 2.582536] PM: Marking nosave pages: 00000000b6000000 - 0000000100000000
[ 2.584130] PM: Basic memory bitmaps created
[ 2.601201] PM: Basic memory bitmaps freed
[ 2.612893] PM: Starting manual resume from disk
[ 2.612893] usb 1-1.1: new high speed USB device using ehci_hcd and address 4
[ 2.616210] PM: Resume from partition 8:1
[ 2.616212] PM: Checking hibernation image.
[ 2.622678] PM: Resume from disk failed.
[ 2.728487] usb 1-1.1: New USB device found, idVendor=059b, idProduct=0370
[ 2.735255] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 2.740181] usb 1-1.1: Product: External HD
[ 2.744181] usb 1-1.1: Manufacturer: Iomega
[ 2.752174] usb 1-1.1: SerialNumber: 152000000733
[ 2.756280] usb 1-1.1: configuration #1 chosen from 1 choice
[ 2.764820] scsi6 : SCSI emulation for USB Mass Storage devices
[ 2.772239] usb-storage: device found at 4
[ 2.772239] usb-storage: waiting for device to settle before scanning
[ 2.844189] usb 1-1.2: new high speed USB device using ehci_hcd and address 5
[ 2.940200] usb 1-1.2: New USB device found, idVendor=1058, idProduct=1001
[ 2.944175] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.952181] usb 1-1.2: Product: External HDD
[ 2.956180] usb 1-1.2: Manufacturer: Western Digital
[ 2.960174] usb 1-1.2: SerialNumber: 574341505732323139323037
[ 2.968266] usb 1-1.2: configuration #1 chosen from 1 choice
[ 2.975185] scsi7 : SCSI emulation for USB Mass Storage devices
[ 2.976247] usb-storage: device found at 5
[ 2.976247] usb-storage: waiting for device to settle before scanning
[ 3.048468] usb 1-1.4: new high speed USB device using ehci_hcd and address 6
[ 3.109563] kjournald starting. Commit interval 15 seconds
[ 3.112242] EXT3 FS on sda2, internal journal
[ 3.116176] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.148191] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0606
[ 3.152177] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.156174] usb 1-1.4: Product: USB2.0 Hub
[ 3.160281] usb 1-1.4: configuration #1 chosen from 1 choice
[ 3.164230] hub 1-1.4:1.0: USB hub found
[ 3.168324] hub 1-1.4:1.0: 4 ports detected
[ 3.448190] usb 1-1.4.2: new high speed USB device using ehci_hcd and address 7
[ 3.549027] usb 1-1.4.2: New USB device found, idVendor=05e3, idProduct=070e
[ 3.552178] usb 1-1.4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 3.560182] usb 1-1.4.2: Product: USB Storage
[ 3.564174] usb 1-1.4.2: SerialNumber: 000000009601
[ 3.568265] usb 1-1.4.2: configuration #1 chosen from 1 choice
[ 3.577704] scsi8 : SCSI emulation for USB Mass Storage devices
[ 3.582932] usb-storage: device found at 7
[ 3.582932] usb-storage: waiting for device to settle before scanning
[ 3.654024] usb 1-1.4.3: new high speed USB device using ehci_hcd and address 8
[ 3.749897] usb 1-1.4.3: New USB device found, idVendor=03f0, idProduct=5611
[ 3.752186] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.756175] usb 1-1.4.3: Product: Photosmart C3100 series
[ 3.760182] usb 1-1.4.3: Manufacturer: HP
[ 3.764174] usb 1-1.4.3: SerialNumber: MY68SC52KM04P9
[ 3.768243] usb 1-1.4.3: configuration #1 chosen from 1 choice
[ 3.772350] scsi9 : SCSI emulation for USB Mass Storage devices
[ 3.776227] usb-storage: device found at 8
[ 3.776227] usb-storage: waiting for device to settle before scanning
[ 3.776227] scsi 6:0:0:0: Direct-Access ST336032 0AS PQ: 0 ANSI: 2
[ 3.780491] usb-storage: device scan complete
[ 3.782182] sd 6:0:0:0: [sdb] 703282608 512-byte logical blocks: (360 GB/335 GiB)
[ 3.790137] sd 6:0:0:0: [sdb] Write Protect is off
[ 3.792175] sd 6:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 3.792178] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3.800687] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3.804177] sdb:
[ 3.852193] usb 1-1.4.4: new high speed USB device using ehci_hcd and address 9
[ 3.977912] scsi 7:0:0:0: Direct-Access WD 5000AAJ External 1.06 PQ: 0 ANSI: 0
[ 3.980427] sd 7:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.988814] sd 7:0:0:0: [sdc] Write Protect is off
[ 3.988814] usb-storage: device scan complete
[ 3.992176] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 3.992178] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 4.000250] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 4.004178] sdc: sdc1
[ 4.010152] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 4.014879] usb 1-1.4.4: New USB device found, idVendor=0402, idProduct=5621
[ 4.014882] usb 1-1.4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 4.014884] usb 1-1.4.4: Product: USB 2.0 Storage Device
[ 4.014885] usb 1-1.4.4: SerialNumber: 00042222200000014305
[ 4.014958] usb 1-1.4.4: configuration #1 chosen from 1 choice
[ 4.036224] scsi10 : SCSI emulation for USB Mass Storage devices
[ 4.036325] usb-storage: device found at 9
[ 4.036326] usb-storage: waiting for device to settle before scanning
[ 4.040206] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 4.580189] scsi 8:0:0:0: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0
[ 4.585929] scsi 8:0:0:1: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0
[ 4.592185] scsi 8:0:0:2: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0
[ 4.596316] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[ 4.600397] scsi 8:0:0:3: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0
[ 4.608200] sd 8:0:0:1: [sde] Attached SCSI removable disk
[ 4.612858] sd 8:0:0:2: [sdf] Attached SCSI removable disk
[ 4.616552] sd 8:0:0:3: [sdg] Attached SCSI removable disk
[ 4.620291] usb-storage: device scan complete
[ 4.777878] scsi 9:0:0:0: Direct-Access HP Photosmart C3180 1.00 PQ: 0 ANSI: 2
[ 4.784189] sd 9:0:0:0: [sdh] Attached SCSI removable disk
[ 4.784311] usb-storage: device scan complete
[ 5.036229] scsi 10:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-W162C TS09 PQ: 0 ANSI: 0
[ 5.040319] usb-storage: device scan complete
[ 5.349962] sdb1
[ 5.356821] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 5.360177] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 6.471968] udevd version 128 started
[ 6.901429] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.904222] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.908210] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 6.912206] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 6.916217] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 6.920210] sd 8:0:0:1: Attached scsi generic sg5 type 0
[ 6.924237] sd 8:0:0:2: Attached scsi generic sg6 type 0
[ 6.928239] sd 8:0:0:3: Attached scsi generic sg7 type 0
[ 6.932226] sd 9:0:0:0: Attached scsi generic sg8 type 0
[ 6.936265] scsi 10:0:0:0: Attached scsi generic sg9 type 5
[ 6.956491] usblp0: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5611
[ 6.960212] usbcore: registered new interface driver usblp
[ 7.025117] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 7.028189] Uniform CD-ROM driver Revision: 3.20
[ 7.032282] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 7.054136] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 7.056312] sr 10:0:0:0: Attached scsi CD-ROM sr1
[ 7.087638] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 7.092838] agpgart-intel 0000:00:00.0: detected 131068K stolen memory
[ 7.098186] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 7.144451] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 7.370234] sky2 driver version 1.23
[ 7.370234] iTCO_vendor_support: vendor-support=0
[ 7.372279] sky2 0000:07:00.0: using bridge 0000:00:1c.4 INT A to get IRQ 17
[ 7.376179] sky2 0000:07:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
[ 7.380202] sky2 0000:07:00.0: setting latency timer to 64
[ 7.380241] sky2 0000:07:00.0: Yukon-2 FE+ chip revision 0
[ 7.384273] alloc irq_desc for 28 on node 0
[ 7.384276] alloc kstat_irqs on node 0
[ 7.384293] sky2 0000:07:00.0: irq 28 for MSI/MSI-X
[ 7.388499] sky2 eth0: addr 00:23:8b:67:11:3b
[ 7.409544] i801_smbus 0000:00:1f.3: PCI->APIC IRQ transform: INT C -> IRQ 19
[ 7.425413] ohci1394 0000:0a:01.0: can't find IRQ for PCI INT B; probably buggy MP table
[ 7.448599] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 7.452266] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 7.456239] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.467508] sdhci: Secure Digital Host Controller Interface driver
[ 7.472201] sdhci: Copyright(c) Pierre Ossman
[ 7.486896] ohci1394: Failed to allocate interrupt 0
[ 7.488274] ohci1394: probe of 0000:0a:01.0 failed with error -16
[ 7.494261] sdhci-pci 0000:0a:01.2: SDHCI controller found [1217:7120] (rev 2)
[ 7.496203] sdhci-pci 0000:0a:01.2: can't find IRQ for PCI INT B; probably buggy MP table
[ 7.500218] mmc0: Unknown controller version (2). You may experience problems.
[ 7.508203] sdhci-pci: probe of 0000:0a:01.2 failed with error -16
[ 7.532236] cfg80211: Calling CRDA to update world regulatory domain
[ 7.776185] Linux video capture interface: v2.00
[ 7.857465] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[ 7.865363] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input4
[ 7.868257] usbcore: registered new interface driver uvcvideo
[ 7.872176] USB Video Class driver (v0.1.0)
[ 8.205251] cfg80211: World regulatory domain updated:
[ 8.208177] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.216176] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.387470] HDA Intel 0000:00:1b.0: PCI->APIC IRQ transform: INT A -> IRQ 22
[ 8.388227] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.513011] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds
[ 8.516188] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 8.525018] iwlagn 0000:08:00.0: using bridge 0000:00:1c.5 INT A to get IRQ 17
[ 8.528203] iwlagn 0000:08:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
[ 8.532185] iwlagn 0000:08:00.0: setting latency timer to 64
[ 8.532231] iwlagn 0000:08:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 8.576463] iwlagn 0000:08:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 8.580233] alloc irq_desc for 29 on node 0
[ 8.580235] alloc kstat_irqs on node 0
[ 8.580255] iwlagn 0000:08:00.0: irq 29 for MSI/MSI-X
[ 8.602336] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 8.604260] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 8.608233] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 8.620143] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 8.841785] phy1: Selected rate control algorithm 'minstrel'
[ 8.844392] Registered led device: rt73usb-phy1::radio
[ 8.848199] Registered led device: rt73usb-phy1::assoc
[ 8.855139] Registered led device: rt73usb-phy1::quality
[ 8.860273] usbcore: registered new interface driver rt73usb
[ 9.228173] Adding 4200956k swap on /dev/sda1. Priority:-1 extents:1 across:4200956k
[ 10.388173] device-mapper: uevent: version 1.0.3
[ 10.393726] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 10.772888] loop: module loaded
[ 10.975572] fuse init (API version 7.12)
[ 14.486654] type=1505 audit(1250277947.220:2): operation="profile_load" pid=1903 name=/bin/ping
[ 14.511501] type=1505 audit(1250277947.240:3): operation="profile_load" pid=1904 name=/sbin/klogd
[ 14.554315] type=1505 audit(1250277947.284:4): operation="profile_load" pid=1905 name=/sbin/syslog-ng
[ 14.598044] type=1505 audit(1250277947.328:5): operation="profile_load" pid=1906 name=/sbin/syslogd
[ 14.644290] type=1505 audit(1250277947.376:6): operation="profile_load" pid=1907 name=/usr/sbin/avahi-daemon
[ 14.683338] type=1505 audit(1250277947.416:7): operation="profile_load" pid=1908 name=/usr/sbin/identd
[ 14.726178] type=1505 audit(1250277947.456:8): operation="profile_load" pid=1909 name=/usr/sbin/mdnsd
[ 14.773905] type=1505 audit(1250277947.504:9): operation="profile_load" pid=1910 name=/usr/sbin/nscd
[ 14.835516] type=1505 audit(1250277947.568:10): operation="profile_load" pid=1918 name=/usr/sbin/ntpd
[ 14.877561] type=1505 audit(1250277947.608:11): operation="profile_load" pid=1924 name=/usr/sbin/traceroute
[ 17.664895] powernow_k8: Unknown symbol acpi_processor_notify_smm
[ 17.664895] powernow_k8: Unknown symbol acpi_processor_unregister_performance
[ 17.664946] powernow_k8: Unknown symbol acpi_processor_register_performance
[ 17.716685] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
[ 17.716764] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
[ 17.716976] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
[ 17.717053] acpi_cpufreq: Unknown symbol acpi_processor_register_performance
[ 32.018349] [drm] Initialized drm 1.1.0 20060810
[ 32.084264] pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 32.084269] pci 0000:00:02.0: setting latency timer to 64
[ 32.098357] alloc irq_desc for 30 on node 0
[ 32.098361] alloc kstat_irqs on node 0
[ 32.098371] pci 0000:00:02.0: irq 30 for MSI/MSI-X
[ 32.098433] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 34.926521] Bluetooth: Core ver 2.15
[ 34.927421] NET: Registered protocol family 31
[ 34.927423] Bluetooth: HCI device and connection manager initialized
[ 34.927426] Bluetooth: HCI socket layer initialized
[ 35.861081] Bluetooth: L2CAP ver 2.13
[ 35.861084] Bluetooth: L2CAP socket layer initialized
[ 35.961444] Bluetooth: RFCOMM TTY layer initialized
[ 35.961448] Bluetooth: RFCOMM socket layer initialized
[ 35.961450] Bluetooth: RFCOMM ver 1.11
[ 36.570360] Bluetooth: SCO (Voice Link) ver 0.6
[ 36.570362] Bluetooth: SCO socket layer initialized
[ 36.978073] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 36.978076] Bluetooth: BNEP filters: protocol multicast
[ 37.254615] Bridge firewalling registered
[ 43.619183] bootsplash: status on console 0 changed to on
[ 45.010967] sky2 eth0: enabling interface
[ 45.011587] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 45.012065] rt73usb 2-1:1.0: firmware: requesting rt73.bin
[ 45.213123] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 45.213547] iwlagn 0000:08:00.0: firmware: requesting iwlwifi-5000-2.ucode
[ 45.284955] iwlagn 0000:08:00.0: loaded firmware version 8.24.2.12
[ 45.420346] Registered led device: iwl-phy0::radio
[ 45.420363] Registered led device: iwl-phy0::assoc
[ 45.420377] Registered led device: iwl-phy0::RX
[ 45.420390] Registered led device: iwl-phy0::TX
[ 45.436813] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 45.525796] NET: Registered protocol family 17
[ 47.368165] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 47.368797] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 58.108177] eth0: no IPv6 routers present
[ 86.750185] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
[-- Attachment #3: dmesg-not-working-2.6.31.log --]
[-- Type: text/x-log, Size: 65898 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-rc5-git3-10-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2009-08-05 22:36:33 +0200
[ 0.000000] Command line: root=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part2 repair=1 resume=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1 splash=silent elevator=cfq vga=0x317
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b5aa1000 (usable)
[ 0.000000] BIOS-e820: 00000000b5aa1000 - 00000000b5aa7000 (reserved)
[ 0.000000] BIOS-e820: 00000000b5aa7000 - 00000000b5bba000 (usable)
[ 0.000000] BIOS-e820: 00000000b5bba000 - 00000000b5c0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000b5c0f000 - 00000000b5d08000 (usable)
[ 0.000000] BIOS-e820: 00000000b5d08000 - 00000000b5f0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000b5f0f000 - 00000000b5f18000 (usable)
[ 0.000000] BIOS-e820: 00000000b5f18000 - 00000000b5f1f000 (reserved)
[ 0.000000] BIOS-e820: 00000000b5f1f000 - 00000000b5f65000 (usable)
[ 0.000000] BIOS-e820: 00000000b5f65000 - 00000000b5f9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b5f9f000 - 00000000b5fe1000 (usable)
[ 0.000000] BIOS-e820: 00000000b5fe1000 - 00000000b5fff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b5fff000 - 00000000b6000000 (usable)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000b7e00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xb6000 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f400 (usable)
[ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000b5aa1000 (usable)
[ 0.000000] modified: 00000000b5aa1000 - 00000000b5aa7000 (reserved)
[ 0.000000] modified: 00000000b5aa7000 - 00000000b5bba000 (usable)
[ 0.000000] modified: 00000000b5bba000 - 00000000b5c0f000 (reserved)
[ 0.000000] modified: 00000000b5c0f000 - 00000000b5d08000 (usable)
[ 0.000000] modified: 00000000b5d08000 - 00000000b5f0f000 (reserved)
[ 0.000000] modified: 00000000b5f0f000 - 00000000b5f18000 (usable)
[ 0.000000] modified: 00000000b5f18000 - 00000000b5f1f000 (reserved)
[ 0.000000] modified: 00000000b5f1f000 - 00000000b5f65000 (usable)
[ 0.000000] modified: 00000000b5f65000 - 00000000b5f9f000 (ACPI NVS)
[ 0.000000] modified: 00000000b5f9f000 - 00000000b5fe1000 (usable)
[ 0.000000] modified: 00000000b5fe1000 - 00000000b5fff000 (ACPI data)
[ 0.000000] modified: 00000000b5fff000 - 00000000b6000000 (usable)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000b6000000
[ 0.000000] 0000000000 - 00b6000000 page 2M
[ 0.000000] kernel direct mapping tables up to b6000000 @ 8000-c000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ a000-10000
[ 0.000000] RAMDISK: 37a98000 - 37fef362
[ 0.000000] ACPI: RSDP 00000000000f6e60 00024 (v02 TOSQCI)
[ 0.000000] ACPI: XSDT 00000000b5ff4a00 0007C (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000b5fe5000 000F4 (v03 T0SQCI TOSQCI00 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000b5fe6000 09F7C (v02 TOSQCI CANTIGA 06040000 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000b5f9efc0 00040
[ 0.000000] ACPI: APIC 00000000b5ffed1e 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 00000000b5ffed86 00038 (v01 TOSQCI TOSQCI00 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000b5ffedbe 0003C (v01 TOSQCI TOSQCI00 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 00000000b5ffedfa 00068 (v01 PTLTD APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000b5ffee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000b5ffee8a 00176 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 00000000b5ff4aa4 00196 (v01 SataRe SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000b5fe4000 00655 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000b5fe3000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000b5fe2000 0020F (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000000000b000 - 0000000000022fff]
[ 0.000000] bootmap [0000000000023000 - 000000000004afff] pages 28
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001c76630] TEXT DATA BSS ==> [0001000000 - 0001c76630]
[ 0.000000] #3 [0037a98000 - 0037fef362] RAMDISK ==> [0037a98000 - 0037fef362]
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
[ 0.000000] #5 [0001c77000 - 0001c771e4] BRK ==> [0001c77000 - 0001c771e4]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
[ 0.000000] found SMP MP-table at [ffff8800000f6f20] f6f20
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001e00000-ffff8800055fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[10] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000b5aa1
[ 0.000000] 0: 0x000b5aa7 -> 0x000b5bba
[ 0.000000] 0: 0x000b5c0f -> 0x000b5d08
[ 0.000000] 0: 0x000b5f0f -> 0x000b5f18
[ 0.000000] 0: 0x000b5f1f -> 0x000b5f65
[ 0.000000] 0: 0x000b5f9f -> 0x000b5fe1
[ 0.000000] 0: 0x000b5fff -> 0x000b6000
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1006809
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3836 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 726391 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b5aa1000 - 00000000b5aa7000
[ 0.000000] PM: Registered nosave memory: 00000000b5bba000 - 00000000b5c0f000
[ 0.000000] PM: Registered nosave memory: 00000000b5d08000 - 00000000b5f0f000
[ 0.000000] PM: Registered nosave memory: 00000000b5f18000 - 00000000b5f1f000
[ 0.000000] PM: Registered nosave memory: 00000000b5f65000 - 00000000b5f9f000
[ 0.000000] PM: Registered nosave memory: 00000000b5fe1000 - 00000000b5fff000
[ 0.000000] PM: Registered nosave memory: 00000000b6000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at b6000000 (gap: b6000000:4a000000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages at ffff88000564b000, static data 82912 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 988787
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part2 repair=1 resume=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1 splash=silent elevator=cfq vga=0x317
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff88000568c000 - ffff88000968c000
[ 0.000000] software IO TLB at phys 0x568c000 - 0x968c000
[ 0.000000] Memory: 3884988k/5242880k available (5578k kernel code, 1215644k absent, 142248k reserved, 4455k data, 1048k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2526.834 MHz processor.
[ 0.000084] Console: colour dummy device 80x25
[ 0.000087] console [tty0] enabled
[ 0.000509] hpet clockevent registered
[ 0.000515] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000523] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.66 BogoMIPS (lpj=10107336)
[ 0.007517] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
[ 0.007625] Security Framework initialized
[ 0.007647] AppArmor: AppArmor initialized
[ 0.007948] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009964] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011452] Mount-cache hash table entries: 256
[ 0.011619] Initializing cgroup subsys ns
[ 0.011626] Initializing cgroup subsys cpuacct
[ 0.011631] Initializing cgroup subsys memory
[ 0.011648] Initializing cgroup subsys devices
[ 0.011652] Initializing cgroup subsys freezer
[ 0.011655] Initializing cgroup subsys net_cls
[ 0.011683] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.011687] CPU: L2 cache: 3072K
[ 0.011692] CPU 0/0x0 -> Node 0
[ 0.011695] CPU: Physical Processor ID: 0
[ 0.011697] CPU: Processor Core ID: 0
[ 0.011702] mce: CPU supports 6 MCE banks
[ 0.011711] CPU0: Thermal monitoring enabled (TM2)
[ 0.011716] using mwait in idle threads.
[ 0.011719] Performance Counters: Core2 events, Intel PMU driver.
[ 0.011727] ... version: 2
[ 0.011729] ... bit width: 40
[ 0.011732] ... generic counters: 2
[ 0.011734] ... value mask: 000000ffffffffff
[ 0.011737] ... max period: 000000007fffffff
[ 0.011740] ... fixed-purpose counters: 3
[ 0.011743] ... counter mask: 0000000700000003
[ 0.013898] ACPI: Core revision 20090521
[ 0.032069] Setting APIC routing to flat
[ 0.032413] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.074973] CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5053.97 BogoMIPS (lpj=10107954)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU 1/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.161539] CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
[ 0.161567] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.164027] Brought up 2 CPUs
[ 0.164027] Total of 2 processors activated (10107.64 BogoMIPS).
[ 0.164086] CPU0 attaching sched-domain:
[ 0.164088] domain 0: span 0-1 level MC
[ 0.164091] groups: 0 1
[ 0.164096] CPU1 attaching sched-domain:
[ 0.164097] domain 0: span 0-1 level MC
[ 0.164099] groups: 1 0
[ 0.164152] devtmpfs: initialized
[ 0.169228] Booting paravirtualized kernel on bare hardware
[ 0.169230] regulator: core version 0.5
[ 0.169230] Time: 19:09:39 Date: 08/14/09
[ 0.169230] NET: Registered protocol family 16
[ 0.169230] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.169230] ACPI: bus type pci registered
[ 0.169230] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.169230] PCI: Not using MMCONFIG.
[ 0.169230] PCI: Using configuration type 1 for base access
[ 0.169230] bio: create slab <bio-0> at 0
[ 0.169321] ACPI: EC: Look up EC in DSDT
[ 0.176414] ACPI: BIOS _OSI(Linux) query ignored
[ 0.180020] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.692004] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 1.336113] ACPI: Interpreter enabled
[ 1.336118] ACPI: (supports S0 S3 S4 S5)
[ 1.336144] ACPI: Using IOAPIC for interrupt routing
[ 1.336198] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 1.340177] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 1.351152] PCI: Using MMCONFIG at e0000000 - efffffff
[ 1.357550] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 1.357555] ACPI: EC: driver started in poll mode
[ 1.357979] ACPI: No dock devices found.
[ 1.358648] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.358738] pci 0000:00:02.0: reg 10 64bit mmio: [0xf4000000-0xf43fffff]
[ 1.358744] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 1.358748] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
[ 1.358781] pci 0000:00:02.1: reg 10 64bit mmio: [0xf4400000-0xf44fffff]
[ 1.358900] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
[ 1.358991] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
[ 1.359082] pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f]
[ 1.359175] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf4a04800-0xf4a04bff]
[ 1.359242] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.359250] pci 0000:00:1a.7: PME# disabled
[ 1.359306] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4800000-0xf4803fff]
[ 1.359364] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.359370] pci 0000:00:1b.0: PME# disabled
[ 1.359453] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.359459] pci 0000:00:1c.0: PME# disabled
[ 1.359551] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.359556] pci 0000:00:1c.4: PME# disabled
[ 1.359642] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.359648] pci 0000:00:1c.5: PME# disabled
[ 1.359721] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f]
[ 1.359811] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf]
[ 1.359902] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df]
[ 1.359995] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4a04c00-0xf4a04fff]
[ 1.360067] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.360074] pci 0000:00:1d.7: PME# disabled
[ 1.360318] pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f]
[ 1.360324] pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f]
[ 1.360332] pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817]
[ 1.360339] pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b]
[ 1.360346] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
[ 1.360353] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf4a04000-0xf4a047ff]
[ 1.360399] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.360405] pci 0000:00:1f.2: PME# disabled
[ 1.360444] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff]
[ 1.360462] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
[ 1.360549] pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
[ 1.360553] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff]
[ 1.360561] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 1.360631] pci 0000:07:00.0: reg 10 64bit mmio: [0x000000-0x003fff]
[ 1.360642] pci 0000:07:00.0: reg 18 io port: [0x00-0xff]
[ 1.360725] pci 0000:07:00.0: supports D1 D2
[ 1.360726] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.360735] pci 0000:07:00.0: PME# disabled
[ 1.360811] pci 0000:00:1c.4: bridge io port: [0x00-0xfff]
[ 1.360816] pci 0000:00:1c.4: bridge 32bit mmio: [0x000000-0x0fffff]
[ 1.360823] pci 0000:00:1c.4: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 1.360910] pci 0000:08:00.0: reg 10 64bit mmio: [0x000000-0x001fff]
[ 1.361023] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 1.361031] pci 0000:08:00.0: PME# disabled
[ 1.361115] pci 0000:00:1c.5: bridge io port: [0x00-0xfff]
[ 1.361119] pci 0000:00:1c.5: bridge 32bit mmio: [0x000000-0x0fffff]
[ 1.361126] pci 0000:00:1c.5: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 1.361169] pci 0000:0a:01.0: reg 10 32bit mmio: [0xff501000-0xff501fff]
[ 1.361176] pci 0000:0a:01.0: reg 14 32bit mmio: [0xf4700000-0xf47007ff]
[ 1.361226] pci 0000:0a:01.0: supports D1 D2
[ 1.361228] pci 0000:0a:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.361234] pci 0000:0a:01.0: PME# disabled
[ 1.361282] pci 0000:0a:01.2: reg 10 32bit mmio: [0xf4700800-0xf47008ff]
[ 1.361347] pci 0000:0a:01.2: supports D1 D2
[ 1.361349] pci 0000:0a:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.361355] pci 0000:0a:01.2: PME# disabled
[ 1.361403] pci 0000:0a:01.3: reg 10 32bit mmio: [0xf4702000-0xf4702fff]
[ 1.361469] pci 0000:0a:01.3: supports D1 D2
[ 1.361471] pci 0000:0a:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.361477] pci 0000:0a:01.3: PME# disabled
[ 1.361544] pci 0000:00:1e.0: transparent bridge
[ 1.361552] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4700000-0xf47fffff]
[ 1.361587] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.361746] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.361857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.361942] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 1.375708] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.375834] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 1.375957] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 *6 7 10 12 14 15)
[ 1.376085] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.376209] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.376333] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.376457] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 1.376579] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 1.376768] SCSI subsystem initialized
[ 1.378382] libata version 3.00 loaded.
[ 1.378382] usbcore: registered new interface driver usbfs
[ 1.378382] usbcore: registered new interface driver hub
[ 1.378382] usbcore: registered new device driver usb
[ 1.378382] PCI: Using ACPI for IRQ routing
[ 1.378382] pci 0000:00:1c.0: BAR 13: can't allocate resource
[ 1.378382] pci 0000:00:1c.0: BAR 14: can't allocate resource
[ 1.378382] pci 0000:00:1c.0: BAR 15: can't allocate resource
[ 1.378382] pci 0000:00:1c.4: BAR 13: can't allocate resource
[ 1.378382] pci 0000:00:1c.4: BAR 14: can't allocate resource
[ 1.378382] pci 0000:00:1c.4: BAR 15: can't allocate resource
[ 1.378382] pci 0000:00:1c.5: BAR 13: can't allocate resource
[ 1.378382] pci 0000:00:1c.5: BAR 14: can't allocate resource
[ 1.378382] pci 0000:00:1c.5: BAR 15: can't allocate resource
[ 1.388030] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.388038] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.393085] AppArmor: AppArmor Filesystem Enabled
[ 1.396011] Switched to high resolution mode on CPU 0
[ 1.397590] Switched to high resolution mode on CPU 1
[ 1.401008] pnp: PnP ACPI init
[ 1.401019] ACPI: bus type pnp registered
[ 1.402250] pnp 00:04: io resource (0x2e-0x2f) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.402257] pnp 00:04: io resource (0x4e-0x4f) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.402262] pnp 00:04: io resource (0x61-0x61) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.402267] pnp 00:04: io resource (0x63-0x63) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.402272] pnp 00:04: io resource (0x65-0x65) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.402278] pnp 00:04: io resource (0x67-0x67) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.402283] pnp 00:04: io resource (0x68-0x68) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.402288] pnp 00:04: io resource (0x6c-0x6c) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.402293] pnp 00:04: io resource (0x70-0x70) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.402298] pnp 00:04: io resource (0x80-0x80) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.402303] pnp 00:04: io resource (0x92-0x92) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.402308] pnp 00:04: io resource (0xb2-0xb3) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.403684] pnp: PnP ACPI: found 9 devices
[ 1.403689] ACPI: ACPI bus type pnp unregistered
[ 1.403700] system 00:02: iomem range 0xfed00000-0xfed003ff has been reserved
[ 1.403708] system 00:04: ioport range 0x3e0-0x3e1 has been reserved
[ 1.403712] system 00:04: ioport range 0x400-0x47f has been reserved
[ 1.403716] system 00:04: ioport range 0x680-0x69f has been reserved
[ 1.403720] system 00:04: ioport range 0x480-0x48f has been reserved
[ 1.403724] system 00:04: ioport range 0xffff-0xffff has been reserved
[ 1.403729] system 00:04: ioport range 0xffff-0xffff has been reserved
[ 1.403733] system 00:04: ioport range 0x1180-0x11ff has been reserved
[ 1.403737] system 00:04: ioport range 0x164e-0x164f has been reserved
[ 1.403741] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
[ 1.403749] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.403753] system 00:08: iomem range 0xfed10000-0xfed13fff has been reserved
[ 1.403758] system 00:08: iomem range 0xfed18000-0xfed18fff has been reserved
[ 1.403762] system 00:08: iomem range 0xfed19000-0xfed19fff has been reserved
[ 1.403766] system 00:08: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.403771] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 1.403775] system 00:08: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 1.408553] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 1.408557] pci 0000:00:1c.0: IO window: disabled
[ 1.408564] pci 0000:00:1c.0: MEM window: disabled
[ 1.408569] pci 0000:00:1c.0: PREFETCH window: disabled
[ 1.408588] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07
[ 1.408593] pci 0000:00:1c.4: IO window: 0x2000-0x2fff
[ 1.408600] pci 0000:00:1c.4: MEM window: 0xb6000000-0xb60fffff
[ 1.408606] pci 0000:00:1c.4: PREFETCH window: disabled
[ 1.408623] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
[ 1.408626] pci 0000:00:1c.5: IO window: disabled
[ 1.408633] pci 0000:00:1c.5: MEM window: 0xb6100000-0xb61fffff
[ 1.408639] pci 0000:00:1c.5: PREFETCH window: disabled
[ 1.408645] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 1.408648] pci 0000:00:1e.0: IO window: disabled
[ 1.408655] pci 0000:00:1e.0: MEM window: 0xf4700000-0xf47fffff
[ 1.408661] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.408676] alloc irq_desc for 17 on node 0
[ 1.408678] alloc kstat_irqs on node 0
[ 1.408683] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.408691] pci 0000:00:1c.0: setting latency timer to 64
[ 1.408699] pci 0000:00:1c.4: enabling device (0000 -> 0003)
[ 1.408704] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.408712] pci 0000:00:1c.4: setting latency timer to 64
[ 1.408719] pci 0000:00:1c.5: enabling device (0000 -> 0002)
[ 1.408724] alloc irq_desc for 16 on node 0
[ 1.408726] alloc kstat_irqs on node 0
[ 1.408729] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.408736] pci 0000:00:1c.5: setting latency timer to 64
[ 1.408744] pci 0000:00:1e.0: setting latency timer to 64
[ 1.408748] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.408751] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.408754] pci_bus 0000:02: resource 0 mem: [0x0-0xfff]
[ 1.408756] pci_bus 0000:02: resource 1 mem: [0x0-0xfffff]
[ 1.408758] pci_bus 0000:02: resource 2 mem: [0x0-0xfffff]
[ 1.408760] pci_bus 0000:07: resource 0 io: [0x2000-0x2fff]
[ 1.408762] pci_bus 0000:07: resource 1 mem: [0xb6000000-0xb60fffff]
[ 1.408764] pci_bus 0000:07: resource 2 mem: [0x0-0xfffff]
[ 1.408766] pci_bus 0000:08: resource 0 mem: [0x0-0xfff]
[ 1.408768] pci_bus 0000:08: resource 1 mem: [0xb6100000-0xb61fffff]
[ 1.408770] pci_bus 0000:08: resource 2 mem: [0x0-0xfffff]
[ 1.408772] pci_bus 0000:0a: resource 1 mem: [0xf4700000-0xf47fffff]
[ 1.408774] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
[ 1.408776] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.408833] NET: Registered protocol family 2
[ 1.408998] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.410088] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.413765] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.414243] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.414248] TCP reno registered
[ 1.414402] NET: Registered protocol family 1
[ 1.414470] Unpacking initramfs...
[ 1.498885] Freeing initrd memory: 5468k freed
[ 1.500909] Simple Boot Flag at 0x36 set to 0x1
[ 1.501219] Scanning for low memory corruption every 60 seconds
[ 1.501420] audit: initializing netlink socket (disabled)
[ 1.501439] type=2000 audit(1250276980.501:1): initialized
[ 1.508437] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.508567] VFS: Disk quotas dquot_6.5.2
[ 1.508602] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.508736] msgmni has been set to 1899
[ 1.508953] alg: No test for stdrng (krng)
[ 1.508980] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.508986] io scheduler noop registered
[ 1.508989] io scheduler anticipatory registered
[ 1.508992] io scheduler deadline registered
[ 1.509014] io scheduler cfq registered (default)
[ 1.509080] pci 0000:00:02.0: Boot video device
[ 1.509384] alloc irq_desc for 24 on node 0
[ 1.509387] alloc kstat_irqs on node 0
[ 1.509399] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 1.509410] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.509577] alloc irq_desc for 25 on node 0
[ 1.509579] alloc kstat_irqs on node 0
[ 1.509587] pcieport-driver 0000:00:1c.4: irq 25 for MSI/MSI-X
[ 1.509597] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 1.509760] alloc irq_desc for 26 on node 0
[ 1.509762] alloc kstat_irqs on node 0
[ 1.509770] pcieport-driver 0000:00:1c.5: irq 26 for MSI/MSI-X
[ 1.509780] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 1.510184] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011100000, using 6144k, total 131008k
[ 1.510190] vesafb: mode is 1024x768x16, linelength=2048, pages=84
[ 1.510194] vesafb: scrolling: redraw
[ 1.510197] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.510357] bootsplash 3.1.6-2004/03/31: looking for picture...
[ 1.519317] bootsplash: silentjpeg size 100719 bytes
[ 1.530201] bootsplash: ...found (1024x768, 38691 bytes, v3).
[ 1.562026] Console: switching to colour frame buffer device 124x44
[ 1.605621] fb0: VESA VGA frame buffer device
[ 1.607228] Non-volatile memory driver v1.3
[ 1.607326] Linux agpgart interface v0.103
[ 1.607421] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.607780] Platform driver 'serial8250' needs updating - please use dev_pm_ops
[ 1.608291] ahci 0000:00:1f.2: version 3.0
[ 1.608308] alloc irq_desc for 19 on node 0
[ 1.608310] alloc kstat_irqs on node 0
[ 1.608317] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.608506] alloc irq_desc for 27 on node 0
[ 1.608508] alloc kstat_irqs on node 0
[ 1.608518] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 1.608599] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.608786] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems
[ 1.608956] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.636049] scsi0 : ahci
[ 1.636202] scsi1 : ahci
[ 1.636307] scsi2 : ahci
[ 1.636412] scsi3 : ahci
[ 1.636514] scsi4 : ahci
[ 1.636618] scsi5 : ahci
[ 1.636819] ata1: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04100 irq 27
[ 1.636989] ata2: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04180 irq 27
[ 1.637157] ata3: DUMMY
[ 1.637215] ata4: DUMMY
[ 1.637272] ata5: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04300 irq 27
[ 1.639171] ata6: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04380 irq 27
[ 1.641168] Fixed MDIO Bus: probed
[ 1.643108] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.645278] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1.647529] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.647533] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.649850] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.656187] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.658622] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.658637] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf4a04800
[ 1.676008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.678602] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.681316] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.684125] usb usb1: Product: EHCI Host Controller
[ 1.686989] usb usb1: Manufacturer: Linux 2.6.31-rc5-git3-10-default ehci_hcd
[ 1.690019] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.693163] usb usb1: configuration #1 chosen from 1 choice
[ 1.696362] hub 1-0:1.0: USB hub found
[ 1.699582] hub 1-0:1.0: 6 ports detected
[ 1.702940] alloc irq_desc for 23 on node 0
[ 1.702942] alloc kstat_irqs on node 0
[ 1.702947] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.706412] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.706415] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.709908] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.717439] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.721084] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.721098] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4a04c00
[ 1.740008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.743788] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.747589] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.751370] usb usb2: Product: EHCI Host Controller
[ 1.755151] usb usb2: Manufacturer: Linux 2.6.31-rc5-git3-10-default ehci_hcd
[ 1.759029] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.762916] usb usb2: configuration #1 chosen from 1 choice
[ 1.766732] hub 2-0:1.0: USB hub found
[ 1.770444] hub 2-0:1.0: 6 ports detected
[ 1.774157] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.777860] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.781578] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.785374] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.785377] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.789200] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.793176] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 1.797192] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.801321] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.805425] usb usb3: Product: UHCI Host Controller
[ 1.809579] usb usb3: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd
[ 1.813775] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.818067] usb usb3: configuration #1 chosen from 1 choice
[ 1.822312] hub 3-0:1.0: USB hub found
[ 1.826577] hub 3-0:1.0: 2 ports detected
[ 1.830853] alloc irq_desc for 21 on node 0
[ 1.830855] alloc kstat_irqs on node 0
[ 1.830859] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.835124] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.835127] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.839316] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.843581] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 1.847812] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.852073] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.856380] usb usb4: Product: UHCI Host Controller
[ 1.860693] usb usb4: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd
[ 1.865045] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.869407] usb usb4: configuration #1 chosen from 1 choice
[ 1.873725] hub 4-0:1.0: USB hub found
[ 1.877963] hub 4-0:1.0: 2 ports detected
[ 1.882230] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1.886523] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.886526] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.890783] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.895142] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[ 1.899438] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.903770] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.908117] usb usb5: Product: UHCI Host Controller
[ 1.912436] usb usb5: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd
[ 1.916863] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.921338] usb usb5: configuration #1 chosen from 1 choice
[ 1.925767] hub 5-0:1.0: USB hub found
[ 1.930141] hub 5-0:1.0: 2 ports detected
[ 1.934538] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.938917] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.938921] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.943229] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.947616] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 1.951968] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.956399] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.960820] usb usb6: Product: UHCI Host Controller
[ 1.965211] usb usb6: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd
[ 1.969650] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.973021] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.973044] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.973067] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.973086] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.973981] ACPI Warning: \_SB_.PCI0.SAT0.PRT0._GTF: Return type mismatch - found Integer, expected Buffer 20090521 nspredef-940
[ 1.973988] ata1.00: _GTF unexpected object type 0x1
[ 2.005017] ata2.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.50, max UDMA/33
[ 2.005064] usb usb6: configuration #1 chosen from 1 choice
[ 2.005096] hub 6-0:1.0: USB hub found
[ 2.005102] hub 6-0:1.0: 2 ports detected
[ 2.023172] ata1.00: ATA-8: TOSHIBA MK3252GSX, LV010M, max UDMA/100
[ 2.027731] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.027748] ata2.00: configured for UDMA/33
[ 2.036896] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.041511] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.041514] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.041704] ata1.00: _GTF unexpected object type 0x1
[ 2.041844] ata1.00: configured for UDMA/100
[ 2.041947] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5
[ 2.042104] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.042144] sd 0:0:0:0: [sda] Write Protect is off
[ 2.042146] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.042166] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.042279] sda:
[ 2.073516] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 2.082854] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 2.083678] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862AS 1.50 PQ: 0 ANSI: 5
[ 2.092402] sda1
[ 2.092442] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.092444] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.092446] usb usb7: Product: UHCI Host Controller
[ 2.092447] usb usb7: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd
[ 2.092449] usb usb7: SerialNumber: 0000:00:1d.1
[ 2.092509] usb usb7: configuration #1 chosen from 1 choice
[ 2.092533] hub 7-0:1.0: USB hub found
[ 2.092539] hub 7-0:1.0: 2 ports detected
[ 2.104030] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 2.139788] sda2
[ 2.144530] alloc irq_desc for 18 on node 0
[ 2.144532] alloc kstat_irqs on node 0
[ 2.144537] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.149386] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.149389] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.154138] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 2.154272] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.163684] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 2.168460] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.173244] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.178017] usb usb8: Product: UHCI Host Controller
[ 2.182774] usb usb8: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd
[ 2.187687] usb usb8: SerialNumber: 0000:00:1d.2
[ 2.192628] usb usb8: configuration #1 chosen from 1 choice
[ 2.197435] hub 8-0:1.0: USB hub found
[ 2.202060] hub 8-0:1.0: 2 ports detected
[ 2.206987] Initializing USB Mass Storage driver...
[ 2.211592] usbcore: registered new interface driver usb-storage
[ 2.216167] USB Mass Storage support registered.
[ 2.220759] usbcore: registered new interface driver libusual
[ 2.225417] usbcore: registered new interface driver ums-alauda
[ 2.230001] usbcore: registered new interface driver ums-cypress
[ 2.234503] usbcore: registered new interface driver ums-datafab
[ 2.238926] usbcore: registered new interface driver ums-freecom
[ 2.243255] usbcore: registered new interface driver ums-isd200
[ 2.247524] usbcore: registered new interface driver ums-jumpshot
[ 2.251736] usbcore: registered new interface driver ums-karma
[ 2.255904] usbcore: registered new interface driver ums-onetouch
[ 2.259980] usbcore: registered new interface driver ums-sddr09
[ 2.263940] usbcore: registered new interface driver ums-sddr55
[ 2.267815] usbcore: registered new interface driver ums-usbat
[ 2.271627] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.275455] Platform driver 'i8042' needs updating - please use dev_pm_ops
[ 2.282572] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.288608] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.292387] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.296119] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.299761] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.303340] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.303608] usb 1-1: New USB device found, idVendor=05e3, idProduct=0606
[ 2.303610] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.303612] usb 1-1: Product: USB2.0 Hub
[ 2.303662] usb 1-1: configuration #1 chosen from 1 choice
[ 2.320827] hub 1-1:1.0: USB hub found
[ 2.320867] mice: PS/2 mouse device common for all mice
[ 2.327910] rtc_cmos 00:05: RTC can wake from S4
[ 2.328111] hub 1-1:1.0: 4 ports detected
[ 2.334845] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.338365] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.341906] cpuidle: using governor ladder
[ 2.345375] cpuidle: using governor menu
[ 2.348996] usbcore: registered new interface driver hiddev
[ 2.352389] usbcore: registered new interface driver usbhid
[ 2.355696] usbhid: v2.6:USB HID core driver
[ 2.355745] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.441631] TCP cubic registered
[ 2.445021] NET: Registered protocol family 10
[ 2.448753] lo: Disabled Privacy Extensions
[ 2.452349] lib80211: common routines for IEEE802.11 drivers
[ 2.455770] lib80211_crypt: registered algorithm 'NULL'
[ 2.455859] PM: Checking image partition /dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1
[ 2.479468] PM: Resume from disk failed.
[ 2.479483] registered taskstats version 1
[ 2.483003] Magic number: 5:695:192
[ 2.486393] acpi device:1e: hash matches
[ 2.489742] rtc_cmos 00:05: setting system clock to 2009-08-14 19:09:42 UTC (1250276982)
[ 2.493262] Freeing unused kernel memory: 1048k freed
[ 2.497001] Write protecting the kernel read-only data: 8880k
[ 2.513025] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 2.546749] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
[ 2.561088] udevd version 128 started
[ 2.788178] usb 2-1: New USB device found, idVendor=07d1, idProduct=3c03
[ 2.792567] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.796822] usb 2-1: Product: 802.11 bg WLAN
[ 2.800987] usb 2-1: Manufacturer: Ralink
[ 2.805164] usb 2-1: configuration #1 chosen from 1 choice
[ 2.853599] PM: Marking nosave pages: 0000000000001000 - 0000000000006000
[ 2.853602] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 2.853606] PM: Marking nosave pages: 00000000b5aa1000 - 00000000b5aa7000
[ 2.853608] PM: Marking nosave pages: 00000000b5bba000 - 00000000b5c0f000
[ 2.853611] PM: Marking nosave pages: 00000000b5d08000 - 00000000b5f0f000
[ 2.853625] PM: Marking nosave pages: 00000000b5f18000 - 00000000b5f1f000
[ 2.853626] PM: Marking nosave pages: 00000000b5f65000 - 00000000b5f9f000
[ 2.853629] PM: Marking nosave pages: 00000000b5fe1000 - 00000000b5fff000
[ 2.853632] PM: Marking nosave pages: 00000000b6000000 - 0000000100000000
[ 2.855225] PM: Basic memory bitmaps created
[ 2.920013] usb 2-4: new high speed USB device using ehci_hcd and address 3
[ 3.066694] usb 2-4: New USB device found, idVendor=04f2, idProduct=b008
[ 3.066697] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 3.066699] usb 2-4: Product: Chicony USB 2.0 Camera
[ 3.066701] usb 2-4: Manufacturer: Chicony Electronics Co., Ltd.
[ 3.066703] usb 2-4: SerialNumber: SN0001
[ 3.066808] usb 2-4: configuration #1 chosen from 1 choice
[ 3.188946] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1e0b1, caps: 0xd04711/0xa00000
[ 3.222488] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
[ 3.284643] PM: Basic memory bitmaps freed
[ 3.295065] PM: Starting manual resume from disk
[ 3.299774] PM: Resume from partition 8:1
[ 3.299776] PM: Checking hibernation image.
[ 3.300007] PM: Resume from disk failed.
[ 3.310059] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 3.490304] usb 3-2: New USB device found, idVendor=046d, idProduct=c50a
[ 3.495506] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.500679] usb 3-2: Product: USB Receiver
[ 3.505783] usb 3-2: Manufacturer: Logitech
[ 3.510919] usb 3-2: configuration #1 chosen from 1 choice
[ 3.535577] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2
[ 3.541107] generic-usb 0003:046D:C50A.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-2/input0
[ 3.624331] usb 1-1.1: new high speed USB device using ehci_hcd and address 4
[ 3.744327] usb 1-1.1: New USB device found, idVendor=059b, idProduct=0370
[ 3.749905] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 3.755438] usb 1-1.1: Product: External HD
[ 3.760937] usb 1-1.1: Manufacturer: Iomega
[ 3.766383] usb 1-1.1: SerialNumber: 152000000733
[ 3.771893] usb 1-1.1: configuration #1 chosen from 1 choice
[ 3.778902] scsi6 : SCSI emulation for USB Mass Storage devices
[ 3.784769] usb-storage: device found at 4
[ 3.784771] usb-storage: waiting for device to settle before scanning
[ 3.828232] kjournald starting. Commit interval 15 seconds
[ 3.834140] EXT3 FS on sda2, internal journal
[ 3.839750] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.856348] usb 1-1.2: new high speed USB device using ehci_hcd and address 5
[ 3.954345] usb 1-1.2: New USB device found, idVendor=1058, idProduct=1001
[ 3.960302] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.966084] usb 1-1.2: Product: External HDD
[ 3.971779] usb 1-1.2: Manufacturer: Western Digital
[ 3.971781] usb 1-1.2: SerialNumber: 574341505732323139323037
[ 3.971892] usb 1-1.2: configuration #1 chosen from 1 choice
[ 3.989252] scsi7 : SCSI emulation for USB Mass Storage devices
[ 3.994989] usb-storage: device found at 5
[ 3.994991] usb-storage: waiting for device to settle before scanning
[ 4.065230] usb 1-1.4: new high speed USB device using ehci_hcd and address 6
[ 4.161358] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0606
[ 4.167126] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.167128] usb 1-1.4: Product: USB2.0 Hub
[ 4.167215] usb 1-1.4: configuration #1 chosen from 1 choice
[ 4.172902] hub 1-1.4:1.0: USB hub found
[ 4.173234] hub 1-1.4:1.0: 4 ports detected
[ 4.464256] usb 1-1.4.2: new high speed USB device using ehci_hcd and address 7
[ 4.564012] usb 1-1.4.2: New USB device found, idVendor=05e3, idProduct=070e
[ 4.569328] usb 1-1.4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 4.574569] usb 1-1.4.2: Product: USB Storage
[ 4.579700] usb 1-1.4.2: SerialNumber: 000000009601
[ 4.584849] usb 1-1.4.2: configuration #1 chosen from 1 choice
[ 4.591049] scsi8 : SCSI emulation for USB Mass Storage devices
[ 4.596108] usb-storage: device found at 7
[ 4.596111] usb-storage: waiting for device to settle before scanning
[ 4.668275] usb 1-1.4.3: new high speed USB device using ehci_hcd and address 8
[ 4.764899] usb 1-1.4.3: New USB device found, idVendor=03f0, idProduct=5611
[ 4.769869] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.774873] usb 1-1.4.3: Product: Photosmart C3100 series
[ 4.779885] usb 1-1.4.3: Manufacturer: HP
[ 4.784723] usb 1-1.4.3: SerialNumber: MY68SC52KM04P9
[ 4.789534] usb 1-1.4.3: configuration #1 chosen from 1 choice
[ 4.794293] scsi 6:0:0:0: Direct-Access ST336032 0AS PQ: 0 ANSI: 2
[ 4.799324] scsi9 : SCSI emulation for USB Mass Storage devices
[ 4.804038] sd 6:0:0:0: [sdb] 703282608 512-byte logical blocks: (360 GB/335 GiB)
[ 4.808811] usb-storage: device found at 8
[ 4.808813] usb-storage: waiting for device to settle before scanning
[ 4.811031] sd 6:0:0:0: [sdb] Write Protect is off
[ 4.811033] sd 6:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 4.811035] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 4.823413] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 4.823418] usb-storage: device scan complete
[ 4.828096] sdb:
[ 4.885285] usb 1-1.4.4: new high speed USB device using ehci_hcd and address 9
[ 4.992678] scsi 7:0:0:0: Direct-Access WD 5000AAJ External 1.06 PQ: 0 ANSI: 0
[ 4.998049] sd 7:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.003418] sd 7:0:0:0: [sdc] Write Protect is off
[ 5.003511] usb-storage: device scan complete
[ 5.007951] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 5.007953] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 5.014042] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 5.018485] sdc: sdc1
[ 5.024792] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 5.029191] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 5.054920] usb 1-1.4.4: New USB device found, idVendor=0402, idProduct=5621
[ 5.059345] usb 1-1.4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 5.063785] usb 1-1.4.4: Product: USB 2.0 Storage Device
[ 5.068219] usb 1-1.4.4: SerialNumber: 00042222200000014305
[ 5.072734] usb 1-1.4.4: configuration #1 chosen from 1 choice
[ 5.077375] scsi10 : SCSI emulation for USB Mass Storage devices
[ 5.081817] usb-storage: device found at 9
[ 5.081819] usb-storage: waiting for device to settle before scanning
[ 5.597221] scsi 8:0:0:0: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0
[ 5.602715] scsi 8:0:0:1: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0
[ 5.608460] scsi 8:0:0:2: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0
[ 5.613334] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[ 5.619714] scsi 8:0:0:3: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0
[ 5.624586] sd 8:0:0:1: [sde] Attached SCSI removable disk
[ 5.630229] sd 8:0:0:2: [sdf] Attached SCSI removable disk
[ 5.635210] sd 8:0:0:3: [sdg] Attached SCSI removable disk
[ 5.639555] usb-storage: device scan complete
[ 5.809608] scsi 9:0:0:0: Direct-Access HP Photosmart C3180 1.00 PQ: 0 ANSI: 2
[ 5.815598] sd 9:0:0:0: [sdh] Attached SCSI removable disk
[ 5.820127] usb-storage: device scan complete
[ 6.082126] scsi 10:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-W162C TS09 PQ: 0 ANSI: 0
[ 6.086964] usb-storage: device scan complete
[ 7.359583] udevd version 128 started
[ 7.680486] sdb1
[ 7.688356] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.692923] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 7.765648] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.770256] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 7.770286] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 7.770315] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 7.770342] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 7.770368] sd 8:0:0:1: Attached scsi generic sg5 type 0
[ 7.770394] sd 8:0:0:2: Attached scsi generic sg6 type 0
[ 7.770421] sd 8:0:0:3: Attached scsi generic sg7 type 0
[ 7.770448] sd 9:0:0:0: Attached scsi generic sg8 type 0
[ 7.770477] scsi 10:0:0:0: Attached scsi generic sg9 type 5
[ 7.851051] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 7.855190] Uniform CD-ROM driver Revision: 3.20
[ 7.859341] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 7.883237] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 7.887551] sr 10:0:0:0: Attached scsi CD-ROM sr1
[ 7.893133] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 7.918519] ACPI: SSDT 00000000b5f1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 7.923372] iTCO_vendor_support: vendor-support=0
[ 7.927782] ACPI: SSDT 00000000b5f18620 00594 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 7.934205] ACPI Warning: Invalid throttling state, reset 20090521 processor_throttling-843
[ 7.939510] Monitor-Mwait will be used to enter C-1 state
[ 8.023521] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 8.028224] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 8.032886] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.045859] Monitor-Mwait will be used to enter C-2 state
[ 8.045893] Monitor-Mwait will be used to enter C-3 state
[ 8.045901] Marking TSC unstable due to TSC halts in idle
[ 8.050571] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 8.055292] processor LNXCPU:00: registered as cooling_device0
[ 8.059868] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 8.064575] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 8.069655] ACPI: Power Button [PWRF]
[ 8.075467] ACPI: SSDT 00000000b5f19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20061109)
[ 8.081211] ACPI: SSDT 00000000b5f19f20 0008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 8.086826] ACPI Warning: Invalid throttling state, reset 20090521 processor_throttling-843
[ 8.092386] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 8.097155] processor LNXCPU:01: registered as cooling_device1
[ 8.102059] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 8.113206] ACPI: AC Adapter [ACAD] (on-line)
[ 8.118024] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 8.123149] ACPI: Power Button [PWRB]
[ 8.128296] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[ 8.133536] ACPI: Lid Switch [LID]
[ 8.295145] sky2 driver version 1.23
[ 8.300025] sky2 0000:07:00.0: enabling device (0000 -> 0003)
[ 8.304907] sky2 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.309672] sky2 0000:07:00.0: setting latency timer to 64
[ 8.309720] sky2 0000:07:00.0: unsupported chip type 0xff
[ 8.314397] sky2 0000:07:00.0: PCI INT A disabled
[ 8.319050] sky2: probe of 0000:07:00.0 failed with error -95
[ 8.345870] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 8.351550] agpgart-intel 0000:00:00.0: detected 131068K stolen memory
[ 8.358497] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 8.366829] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 8.372061] ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f]
[ 8.377359] ACPI: Device needs an ACPI driver
[ 8.382873] i801_smbus: probe of 0000:00:1f.3 failed with error -16
[ 8.434266] cfg80211: Calling CRDA to update world regulatory domain
[ 8.478588] usblp0: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5611
[ 8.484326] usbcore: registered new interface driver usblp
[ 8.500037] Clocksource tsc unstable (delta = -77775007 ns)
[ 8.784303] cfg80211: World regulatory domain updated:
[ 8.789823] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.795322] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.000366] thermal LNXTHERM:01: registered as thermal_zone0
[ 9.005878] ACPI: Thermal Zone [THRM] (64 C)
[ 9.824459] ACPI: Battery Slot [BAT1] (battery present)
[ 9.829956] ACPI: WMI: Mapper loaded
[ 9.928091] ohci1394 0000:0a:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.935834] Linux video capture interface: v2.00
[ 9.957340] sdhci: Secure Digital Host Controller Interface driver
[ 9.962871] sdhci: Copyright(c) Pierre Ossman
[ 9.976166] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[ 9.985071] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input7
[ 9.990712] usbcore: registered new interface driver uvcvideo
[ 9.996138] USB Video Class driver (v0.1.0)
[ 10.002656] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[ff501000-ff5017ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 10.018831] sdhci-pci 0000:0a:01.2: SDHCI controller found [1217:7120] (rev 2)
[ 10.024679] sdhci-pci 0000:0a:01.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.030607] mmc0: Unknown controller version (2). You may experience problems.
[ 10.036549] Registered led device: mmc0::
[ 10.042365] mmc0: SDHCI controller on PCI [0000:0a:01.2] using DMA
[ 10.195751] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds
[ 10.201482] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 10.207240] iwlagn 0000:08:00.0: enabling device (0000 -> 0002)
[ 10.212776] iwlagn 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.218226] iwlagn 0000:08:00.0: setting latency timer to 64
[ 10.218276] iwlagn 0000:08:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0xFDFFFFFF
[ 10.375477] iwlagn 0000:08:00.0: Failed, HW not ready
[ 10.381217] iwlagn 0000:08:00.0: PCI INT A disabled
[ 10.390310] alloc irq_desc for 22 on node 0
[ 10.390313] alloc kstat_irqs on node 0
[ 10.390322] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 10.396039] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.525462] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 10.531287] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 10.536920] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.678554] phy1: Selected rate control algorithm 'minstrel'
[ 10.679034] Registered led device: rt73usb-phy1::radio
[ 10.684732] Registered led device: rt73usb-phy1::assoc
[ 10.690496] Registered led device: rt73usb-phy1::quality
[ 10.696491] usbcore: registered new interface driver rt73usb
[ 10.704179] wlan0 renamed to wlan1 by udevd [1695]
[ 10.710116] udev: renamed network interface wlan0 to wlan1
[ 11.289448] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b240001542c7b]
[ 11.496270] Adding 4200956k swap on /dev/sda1. Priority:-1 extents:1 across:4200956k
[ 12.600376] device-mapper: uevent: version 1.0.3
[ 12.605846] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 12.986411] loop: module loaded
[ 13.433601] fuse init (API version 7.12)
[ 16.221086] type=1505 audit(1250273395.742:2): operation="profile_load" pid=2058 name=/bin/ping
[ 16.243573] type=1505 audit(1250273395.761:3): operation="profile_load" pid=2059 name=/sbin/klogd
[ 16.284620] type=1505 audit(1250273395.805:4): operation="profile_load" pid=2060 name=/sbin/syslog-ng
[ 16.329822] type=1505 audit(1250273395.850:5): operation="profile_load" pid=2061 name=/sbin/syslogd
[ 16.394165] type=1505 audit(1250273395.914:6): operation="profile_load" pid=2078 name=/usr/sbin/avahi-daemon
[ 16.478233] type=1505 audit(1250273395.998:7): operation="profile_load" pid=2097 name=/usr/sbin/identd
[ 16.557940] type=1505 audit(1250273396.077:8): operation="profile_load" pid=2098 name=/usr/sbin/mdnsd
[ 16.604080] type=1505 audit(1250273396.125:9): operation="profile_load" pid=2100 name=/usr/sbin/nscd
[ 16.667989] type=1505 audit(1250273396.185:10): operation="profile_load" pid=2103 name=/usr/sbin/ntpd
[ 16.707278] type=1505 audit(1250273396.225:11): operation="profile_load" pid=2108 name=/usr/sbin/traceroute
[ 33.553050] [drm] Initialized drm 1.1.0 20060810
[ 33.848887] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 33.848900] pci 0000:00:02.0: setting latency timer to 64
[ 33.870743] alloc irq_desc for 28 on node 0
[ 33.870746] alloc kstat_irqs on node 0
[ 33.870756] pci 0000:00:02.0: irq 28 for MSI/MSI-X
[ 34.112329] acpi device:05: registered as cooling_device2
[ 34.112893] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input11
[ 34.113023] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 34.113105] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 36.696351] Bluetooth: Core ver 2.15
[ 36.696523] NET: Registered protocol family 31
[ 36.696529] Bluetooth: HCI device and connection manager initialized
[ 36.696536] Bluetooth: HCI socket layer initialized
[ 37.269452] Bluetooth: L2CAP ver 2.13
[ 37.269459] Bluetooth: L2CAP socket layer initialized
[ 37.348557] Bluetooth: RFCOMM TTY layer initialized
[ 37.348574] Bluetooth: RFCOMM socket layer initialized
[ 37.348579] Bluetooth: RFCOMM ver 1.11
[ 38.200624] Bluetooth: SCO (Voice Link) ver 0.6
[ 38.200632] Bluetooth: SCO socket layer initialized
[ 38.953181] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 38.953189] Bluetooth: BNEP filters: protocol multicast
[ 39.442504] Bridge firewalling registered
[ 47.466590] rt73usb 2-1:1.0: firmware: requesting rt73.bin
[ 48.672642] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 48.976492] NET: Registered protocol family 17
[ 49.886651] bootsplash: status on console 0 changed to on
[ 3905.683606] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
[-- Attachment #4: dmesg-working-2.6.30.log --]
[-- Type: text/x-log, Size: 64351 bytes --]
[ 0.000000] Linux version 2.6.30.4-15-desktop (root@flash) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP PREEMPT Fri Aug 14 16:13:45 WEST 2009
[ 0.000000] Command line: root=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part2 repair=1 resume=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1 splash=silent elevator=cfq vga=0x317
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b5aa1000 (usable)
[ 0.000000] BIOS-e820: 00000000b5aa1000 - 00000000b5aa7000 (reserved)
[ 0.000000] BIOS-e820: 00000000b5aa7000 - 00000000b5bba000 (usable)
[ 0.000000] BIOS-e820: 00000000b5bba000 - 00000000b5c0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000b5c0f000 - 00000000b5d08000 (usable)
[ 0.000000] BIOS-e820: 00000000b5d08000 - 00000000b5f0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000b5f0f000 - 00000000b5f18000 (usable)
[ 0.000000] BIOS-e820: 00000000b5f18000 - 00000000b5f1f000 (reserved)
[ 0.000000] BIOS-e820: 00000000b5f1f000 - 00000000b5f65000 (usable)
[ 0.000000] BIOS-e820: 00000000b5f65000 - 00000000b5f9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b5f9f000 - 00000000b5fe1000 (usable)
[ 0.000000] BIOS-e820: 00000000b5fe1000 - 00000000b5fff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b5fff000 - 00000000b6000000 (usable)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000b7e00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xb6000 max_arch_pfn = 0x100000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f400 (usable)
[ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000b5aa1000 (usable)
[ 0.000000] modified: 00000000b5aa1000 - 00000000b5aa7000 (reserved)
[ 0.000000] modified: 00000000b5aa7000 - 00000000b5bba000 (usable)
[ 0.000000] modified: 00000000b5bba000 - 00000000b5c0f000 (reserved)
[ 0.000000] modified: 00000000b5c0f000 - 00000000b5d08000 (usable)
[ 0.000000] modified: 00000000b5d08000 - 00000000b5f0f000 (reserved)
[ 0.000000] modified: 00000000b5f0f000 - 00000000b5f18000 (usable)
[ 0.000000] modified: 00000000b5f18000 - 00000000b5f1f000 (reserved)
[ 0.000000] modified: 00000000b5f1f000 - 00000000b5f65000 (usable)
[ 0.000000] modified: 00000000b5f65000 - 00000000b5f9f000 (ACPI NVS)
[ 0.000000] modified: 00000000b5f9f000 - 00000000b5fe1000 (usable)
[ 0.000000] modified: 00000000b5fe1000 - 00000000b5fff000 (ACPI data)
[ 0.000000] modified: 00000000b5fff000 - 00000000b6000000 (usable)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] init_memory_mapping: 0000000000000000-00000000b6000000
[ 0.000000] 0000000000 - 00b6000000 page 2M
[ 0.000000] kernel direct mapping tables up to b6000000 @ 8000-c000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ a000-10000
[ 0.000000] RAMDISK: 37a6a000 - 37fefd98
[ 0.000000] ACPI: RSDP 00000000000f6e60 00024 (v02 TOSQCI)
[ 0.000000] ACPI: XSDT 00000000b5ff4a00 0007C (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000b5fe5000 000F4 (v03 T0SQCI TOSQCI00 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000b5fe6000 09F7C (v02 TOSQCI CANTIGA 06040000 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000b5f9efc0 00040
[ 0.000000] ACPI: APIC 00000000b5ffed1e 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 00000000b5ffed86 00038 (v01 TOSQCI TOSQCI00 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000b5ffedbe 0003C (v01 TOSQCI TOSQCI00 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 00000000b5ffedfa 00068 (v01 PTLTD APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000b5ffee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000b5ffee8a 00176 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 00000000b5ff4aa4 00196 (v01 SataRe SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000b5fe4000 00655 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000b5fe3000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000b5fe2000 0020F (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000000000b000 - 0000000000022fff]
[ 0.000000] bootmap [0000000000023000 - 000000000004afff] pages 28
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000c06870] TEXT DATA BSS ==> [0000200000 - 0000c06870]
[ 0.000000] #3 [0037a6a000 - 0037fefd98] RAMDISK ==> [0037a6a000 - 0037fefd98]
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
[ 0.000000] #5 [0000c07000 - 0000c071e4] BRK ==> [0000c07000 - 0000c071e4]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
[ 0.000000] found SMP MP-table at [ffff8800000f6f20] f6f20
[ 0.000000] [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[10] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000b5aa1
[ 0.000000] 0: 0x000b5aa7 -> 0x000b5bba
[ 0.000000] 0: 0x000b5c0f -> 0x000b5d08
[ 0.000000] 0: 0x000b5f0f -> 0x000b5f18
[ 0.000000] 0: 0x000b5f1f -> 0x000b5f65
[ 0.000000] 0: 0x000b5f9f -> 0x000b5fe1
[ 0.000000] 0: 0x000b5fff -> 0x000b6000
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1006809
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2668 pages reserved
[ 0.000000] DMA zone: 1270 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 726391 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b5aa1000 - 00000000b5aa7000
[ 0.000000] PM: Registered nosave memory: 00000000b5bba000 - 00000000b5c0f000
[ 0.000000] PM: Registered nosave memory: 00000000b5d08000 - 00000000b5f0f000
[ 0.000000] PM: Registered nosave memory: 00000000b5f18000 - 00000000b5f1f000
[ 0.000000] PM: Registered nosave memory: 00000000b5f65000 - 00000000b5f9f000
[ 0.000000] PM: Registered nosave memory: 00000000b5fe1000 - 00000000b5fff000
[ 0.000000] PM: Registered nosave memory: 00000000b6000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at b8000000 (gap: b6000000:4a000000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages at ffff880028023000, static data 72544 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 986221
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part2 repair=1 resume=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1 splash=silent elevator=cfq vga=0x317
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2527.285 MHz processor.
[ 0.000999] Console: colour dummy device 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Checking aperture...
[ 0.000999] No AGP bridge found
[ 0.000999] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000999] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000999] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000999] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000999] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000999] Memory: 3887480k/5242880k available (5000k kernel code, 1215644k absent, 139756k reserved, 2428k data, 1580k init)
[ 0.000999] hpet clockevent registered
[ 0.000999] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.57 BogoMIPS (lpj=2527285)
[ 0.000999] Security Framework initialized
[ 0.000999] SELinux: Disabled at boot.
[ 0.000999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002581] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.003583] Mount-cache hash table entries: 256
[ 0.003770] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003775] CPU: L2 cache: 3072K
[ 0.003779] CPU 0/0x0 -> Node 0
[ 0.003782] CPU: Physical Processor ID: 0
[ 0.003785] CPU: Processor Core ID: 0
[ 0.003794] CPU0: Thermal monitoring enabled (TM2)
[ 0.003800] using mwait in idle threads.
[ 0.004658] ACPI: Core revision 20090320
[ 0.020064] Setting APIC routing to flat
[ 0.020409] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.030788] CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
[ 0.030995] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Calibrating delay using timer specific routine.. 5053.73 BogoMIPS (lpj=2526869)
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 3072K
[ 0.000999] CPU 1/0x1 -> Node 0
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.000999] CPU1: Thermal monitoring enabled (TM2)
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.102562] CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
[ 0.102603] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.103003] Brought up 2 CPUs
[ 0.103009] Total of 2 processors activated (10108.30 BogoMIPS).
[ 0.103076] CPU0 attaching sched-domain:
[ 0.103079] domain 0: span 0-1 level MC
[ 0.103081] groups: 0 1
[ 0.103086] CPU1 attaching sched-domain:
[ 0.103088] domain 0: span 0-1 level MC
[ 0.103090] groups: 1 0
[ 0.103154] net_namespace: 1888 bytes
[ 0.103154] Booting paravirtualized kernel on bare hardware
[ 0.104097] regulator: core version 0.5
[ 0.104097] Time: 19:06:56 Date: 08/14/09
[ 0.104097] NET: Registered protocol family 16
[ 0.104218] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.104224] ACPI: bus type pci registered
[ 0.104293] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.104298] PCI: Not using MMCONFIG.
[ 0.104301] PCI: Using configuration type 1 for base access
[ 0.105052] bio: create slab <bio-0> at 0
[ 0.106647] ACPI: EC: Look up EC in DSDT
[ 0.112835] ACPI: BIOS _OSI(Linux) query ignored
[ 0.114218] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.620003] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 0.781142] ACPI: Interpreter enabled
[ 0.781147] ACPI: (supports S0 S3 S4 S5)
[ 0.781172] ACPI: Using IOAPIC for interrupt routing
[ 0.781240] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.784597] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.795143] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.802807] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.802812] ACPI: EC: driver started in poll mode
[ 0.803280] ACPI: No dock devices found.
[ 0.803379] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.803476] pci 0000:00:02.0: reg 10 64bit mmio: [0xf4000000-0xf43fffff]
[ 0.803482] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.803487] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
[ 0.803521] pci 0000:00:02.1: reg 10 64bit mmio: [0xf4400000-0xf44fffff]
[ 0.803641] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
[ 0.803732] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
[ 0.803823] pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f]
[ 0.803917] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf4a04800-0xf4a04bff]
[ 0.803984] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.803992] pci 0000:00:1a.7: PME# disabled
[ 0.804051] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4800000-0xf4803fff]
[ 0.804110] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.804117] pci 0000:00:1b.0: PME# disabled
[ 0.804202] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.804209] pci 0000:00:1c.0: PME# disabled
[ 0.804299] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.804306] pci 0000:00:1c.4: PME# disabled
[ 0.804395] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.804401] pci 0000:00:1c.5: PME# disabled
[ 0.804477] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f]
[ 0.804569] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf]
[ 0.804659] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df]
[ 0.804752] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4a04c00-0xf4a04fff]
[ 0.804820] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.804827] pci 0000:00:1d.7: PME# disabled
[ 0.805081] pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f]
[ 0.805088] pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f]
[ 0.805095] pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817]
[ 0.805102] pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b]
[ 0.805110] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
[ 0.805117] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf4a04000-0xf4a047ff]
[ 0.805163] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.805170] pci 0000:00:1f.2: PME# disabled
[ 0.805213] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff]
[ 0.805231] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
[ 0.805317] pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
[ 0.805321] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff]
[ 0.805328] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 0.805400] pci 0000:07:00.0: reg 10 64bit mmio: [0x000000-0x003fff]
[ 0.805410] pci 0000:07:00.0: reg 18 io port: [0x00-0xff]
[ 0.805490] pci 0000:07:00.0: supports D1 D2
[ 0.805492] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.805500] pci 0000:07:00.0: PME# disabled
[ 0.805579] pci 0000:00:1c.4: bridge io port: [0x00-0xfff]
[ 0.805583] pci 0000:00:1c.4: bridge 32bit mmio: [0x000000-0x0fffff]
[ 0.805591] pci 0000:00:1c.4: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 0.805680] pci 0000:08:00.0: reg 10 64bit mmio: [0x000000-0x001fff]
[ 0.805794] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.805804] pci 0000:08:00.0: PME# disabled
[ 0.805887] pci 0000:00:1c.5: bridge io port: [0x00-0xfff]
[ 0.805892] pci 0000:00:1c.5: bridge 32bit mmio: [0x000000-0x0fffff]
[ 0.805899] pci 0000:00:1c.5: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 0.805942] pci 0000:0a:01.0: reg 10 32bit mmio: [0xff501000-0xff501fff]
[ 0.805949] pci 0000:0a:01.0: reg 14 32bit mmio: [0xf4700000-0xf47007ff]
[ 0.806002] pci 0000:0a:01.0: supports D1 D2
[ 0.806004] pci 0000:0a:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.806011] pci 0000:0a:01.0: PME# disabled
[ 0.806061] pci 0000:0a:01.2: reg 10 32bit mmio: [0xf4700800-0xf47008ff]
[ 0.806127] pci 0000:0a:01.2: supports D1 D2
[ 0.806128] pci 0000:0a:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.806136] pci 0000:0a:01.2: PME# disabled
[ 0.806184] pci 0000:0a:01.3: reg 10 32bit mmio: [0xf4702000-0xf4702fff]
[ 0.806249] pci 0000:0a:01.3: supports D1 D2
[ 0.806251] pci 0000:0a:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.806259] pci 0000:0a:01.3: PME# disabled
[ 0.806326] pci 0000:00:1e.0: transparent bridge
[ 0.806335] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4700000-0xf47fffff]
[ 0.806372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.806538] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.806640] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.806727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.824805] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.824960] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.825119] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 *6 7 10 12 14 15)
[ 0.825270] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.825422] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.825575] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.825727] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.825878] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.826082] SCSI subsystem initialized
[ 0.826109] libata version 3.00 loaded.
[ 0.826109] usbcore: registered new interface driver usbfs
[ 0.826109] usbcore: registered new interface driver hub
[ 0.826109] usbcore: registered new device driver usb
[ 0.826109] PCI: Using ACPI for IRQ routing
[ 0.826109] pci 0000:00:1c.0: BAR 13: can't allocate resource
[ 0.826109] pci 0000:00:1c.0: BAR 14: can't allocate resource
[ 0.826109] pci 0000:00:1c.0: BAR 15: can't allocate resource
[ 0.826109] pci 0000:00:1c.4: BAR 13: can't allocate resource
[ 0.826109] pci 0000:00:1c.4: BAR 14: can't allocate resource
[ 0.826109] pci 0000:00:1c.4: BAR 15: can't allocate resource
[ 0.826109] pci 0000:00:1c.5: BAR 13: can't allocate resource
[ 0.826109] pci 0000:00:1c.5: BAR 14: can't allocate resource
[ 0.826109] pci 0000:00:1c.5: BAR 15: can't allocate resource
[ 0.829029] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.829037] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.833008] Switched to high resolution mode on CPU 0
[ 0.833644] Switched to high resolution mode on CPU 1
[ 0.835007] pnp: PnP ACPI init
[ 0.835016] ACPI: bus type pnp registered
[ 0.836324] pnp 00:04: io resource (0x2e-0x2f) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.836330] pnp 00:04: io resource (0x4e-0x4f) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.836336] pnp 00:04: io resource (0x61-0x61) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.836342] pnp 00:04: io resource (0x63-0x63) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.836347] pnp 00:04: io resource (0x65-0x65) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.836353] pnp 00:04: io resource (0x67-0x67) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.836359] pnp 00:04: io resource (0x68-0x68) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.836364] pnp 00:04: io resource (0x6c-0x6c) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.836370] pnp 00:04: io resource (0x70-0x70) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.836375] pnp 00:04: io resource (0x80-0x80) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.836381] pnp 00:04: io resource (0x92-0x92) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.836386] pnp 00:04: io resource (0xb2-0xb3) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.838090] pnp: PnP ACPI: found 9 devices
[ 0.838095] ACPI: ACPI bus type pnp unregistered
[ 0.838105] system 00:02: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.838114] system 00:04: ioport range 0x3e0-0x3e1 has been reserved
[ 0.838119] system 00:04: ioport range 0x400-0x47f has been reserved
[ 0.838123] system 00:04: ioport range 0x680-0x69f has been reserved
[ 0.838127] system 00:04: ioport range 0x480-0x48f has been reserved
[ 0.838132] system 00:04: ioport range 0xffff-0xffff has been reserved
[ 0.838137] system 00:04: ioport range 0xffff-0xffff has been reserved
[ 0.838141] system 00:04: ioport range 0x1180-0x11ff has been reserved
[ 0.838146] system 00:04: ioport range 0x164e-0x164f has been reserved
[ 0.838150] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
[ 0.838158] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.838165] system 00:08: iomem range 0xfed10000-0xfed13fff has been reserved
[ 0.838169] system 00:08: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.838174] system 00:08: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.838179] system 00:08: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.838184] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.838188] system 00:08: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.842931] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.842935] pci 0000:00:1c.0: IO window: disabled
[ 0.842942] pci 0000:00:1c.0: MEM window: disabled
[ 0.842948] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.842970] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07
[ 0.842975] pci 0000:00:1c.4: IO window: 0x2000-0x2fff
[ 0.842983] pci 0000:00:1c.4: MEM window: 0xb8000000-0xb80fffff
[ 0.842989] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.843012] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
[ 0.843016] pci 0000:00:1c.5: IO window: disabled
[ 0.843023] pci 0000:00:1c.5: MEM window: 0xb8100000-0xb81fffff
[ 0.843029] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.843038] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 0.843042] pci 0000:00:1e.0: IO window: disabled
[ 0.843049] pci 0000:00:1e.0: MEM window: 0xf4700000-0xf47fffff
[ 0.843055] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.843071] alloc irq_desc for 17 on cpu 0 node 0
[ 0.843073] alloc kstat_irqs on cpu 0 node 0
[ 0.843078] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.843087] pci 0000:00:1c.0: setting latency timer to 64
[ 0.843094] pci 0000:00:1c.4: enabling device (0000 -> 0003)
[ 0.843100] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.843107] pci 0000:00:1c.4: setting latency timer to 64
[ 0.843115] pci 0000:00:1c.5: enabling device (0000 -> 0002)
[ 0.843120] alloc irq_desc for 16 on cpu 0 node 0
[ 0.843122] alloc kstat_irqs on cpu 0 node 0
[ 0.843125] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.843133] pci 0000:00:1c.5: setting latency timer to 64
[ 0.843141] pci 0000:00:1e.0: setting latency timer to 64
[ 0.843145] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.843147] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.843149] pci_bus 0000:02: resource 0 mem: [0x0-0xfff]
[ 0.843151] pci_bus 0000:02: resource 1 mem: [0x0-0xfffff]
[ 0.843153] pci_bus 0000:02: resource 2 mem: [0x0-0xfffff]
[ 0.843155] pci_bus 0000:07: resource 0 io: [0x2000-0x2fff]
[ 0.843157] pci_bus 0000:07: resource 1 mem: [0xb8000000-0xb80fffff]
[ 0.843159] pci_bus 0000:07: resource 2 mem: [0x0-0xfffff]
[ 0.843162] pci_bus 0000:08: resource 0 mem: [0x0-0xfff]
[ 0.843164] pci_bus 0000:08: resource 1 mem: [0xb8100000-0xb81fffff]
[ 0.843166] pci_bus 0000:08: resource 2 mem: [0x0-0xfffff]
[ 0.843168] pci_bus 0000:0a: resource 1 mem: [0xf4700000-0xf47fffff]
[ 0.843170] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
[ 0.843172] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.843227] NET: Registered protocol family 2
[ 0.850146] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.851291] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.854937] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.855432] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.855437] TCP reno registered
[ 0.858112] NET: Registered protocol family 1
[ 0.858178] Unpacking initramfs...
[ 0.947595] Freeing initrd memory: 5655k freed
[ 0.949764] Simple Boot Flag at 0x36 set to 0x1
[ 0.950030] Scanning for low memory corruption every 60 seconds
[ 0.950217] audit: initializing netlink socket (disabled)
[ 0.950237] type=2000 audit(1250276816.950:1): initialized
[ 0.952888] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.953008] VFS: Disk quotas dquot_6.5.2
[ 0.953045] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.953178] msgmni has been set to 7603
[ 0.953391] alg: No test for stdrng (krng)
[ 0.953423] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.953429] io scheduler noop registered
[ 0.953432] io scheduler anticipatory registered
[ 0.953435] io scheduler deadline registered
[ 0.953454] io scheduler cfq registered (default)
[ 0.953513] pci 0000:00:02.0: Boot video device
[ 0.953817] alloc irq_desc for 24 on cpu 0 node 0
[ 0.953820] alloc kstat_irqs on cpu 0 node 0
[ 0.953833] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.953851] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.954027] alloc irq_desc for 25 on cpu 0 node 0
[ 0.954029] alloc kstat_irqs on cpu 0 node 0
[ 0.954038] pcieport-driver 0000:00:1c.4: irq 25 for MSI/MSI-X
[ 0.954055] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.954229] alloc irq_desc for 26 on cpu 0 node 0
[ 0.954231] alloc kstat_irqs on cpu 0 node 0
[ 0.954239] pcieport-driver 0000:00:1c.5: irq 26 for MSI/MSI-X
[ 0.954256] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.954527] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20011100000, using 3072k, total 131008k
[ 0.954534] vesafb: mode is 1024x768x16, linelength=2048, pages=84
[ 0.954537] vesafb: scrolling: redraw
[ 0.954541] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.966712] Console: switching to colour frame buffer device 128x48
[ 0.978863] fb0: VESA VGA frame buffer device
[ 0.980115] Non-volatile memory driver v1.3
[ 0.980213] Linux agpgart interface v0.103
[ 0.980308] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.980801] Driver 'sd' needs updating - please use bus_type methods
[ 0.980989] ahci 0000:00:1f.2: version 3.0
[ 0.981007] alloc irq_desc for 19 on cpu 0 node 0
[ 0.981009] alloc kstat_irqs on cpu 0 node 0
[ 0.981014] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.981204] alloc irq_desc for 27 on cpu 0 node 0
[ 0.981205] alloc kstat_irqs on cpu 0 node 0
[ 0.981215] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 0.981300] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.981489] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems
[ 0.981660] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.984829] scsi0 : ahci
[ 0.984970] scsi1 : ahci
[ 0.985079] scsi2 : ahci
[ 0.985181] scsi3 : ahci
[ 0.985286] scsi4 : ahci
[ 0.985389] scsi5 : ahci
[ 0.985587] ata1: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04100 irq 27
[ 0.985759] ata2: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04180 irq 27
[ 0.985929] ata3: DUMMY
[ 0.985986] ata4: DUMMY
[ 0.986048] ata5: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04300 irq 27
[ 0.986219] ata6: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04380 irq 27
[ 0.986471] Fixed MDIO Bus: probed
[ 0.986555] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.986747] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 0.988875] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.988878] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.991064] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.997257] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.999570] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.999582] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf4a04800
[ 1.011006] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.013470] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.016065] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.018756] usb usb1: Product: EHCI Host Controller
[ 1.021507] usb usb1: Manufacturer: Linux 2.6.30.4-15-desktop ehci_hcd
[ 1.024395] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.027372] usb usb1: configuration #1 chosen from 1 choice
[ 1.030429] hub 1-0:1.0: USB hub found
[ 1.033518] hub 1-0:1.0: 6 ports detected
[ 1.036760] alloc irq_desc for 23 on cpu 0 node 0
[ 1.036762] alloc kstat_irqs on cpu 0 node 0
[ 1.036767] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.040088] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.040092] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.043459] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.050838] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.054352] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.054365] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4a04c00
[ 1.067008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.070670] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.074459] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.078345] usb usb2: Product: EHCI Host Controller
[ 1.082291] usb usb2: Manufacturer: Linux 2.6.30.4-15-desktop ehci_hcd
[ 1.086375] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.090426] usb usb2: configuration #1 chosen from 1 choice
[ 1.094453] hub 2-0:1.0: USB hub found
[ 1.098443] hub 2-0:1.0: 6 ports detected
[ 1.102483] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.106502] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.110542] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.114557] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.114560] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.118510] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.122498] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 1.126419] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.130451] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.134575] usb usb3: Product: UHCI Host Controller
[ 1.138775] usb usb3: Manufacturer: Linux 2.6.30.4-15-desktop uhci_hcd
[ 1.143075] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.147446] usb usb3: configuration #1 chosen from 1 choice
[ 1.151780] hub 3-0:1.0: USB hub found
[ 1.156142] hub 3-0:1.0: 2 ports detected
[ 1.160510] alloc irq_desc for 21 on cpu 0 node 0
[ 1.160512] alloc kstat_irqs on cpu 0 node 0
[ 1.160516] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.164982] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.164985] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.169384] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.173918] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 1.178377] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.182848] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.187303] usb usb4: Product: UHCI Host Controller
[ 1.191735] usb usb4: Manufacturer: Linux 2.6.30.4-15-desktop uhci_hcd
[ 1.196218] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.200700] usb usb4: configuration #1 chosen from 1 choice
[ 1.205247] hub 4-0:1.0: USB hub found
[ 1.209734] hub 4-0:1.0: 2 ports detected
[ 1.214218] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1.218724] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.218727] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.223168] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.227653] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[ 1.232099] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.236599] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.241103] usb usb5: Product: UHCI Host Controller
[ 1.245630] usb usb5: Manufacturer: Linux 2.6.30.4-15-desktop uhci_hcd
[ 1.250172] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.254717] usb usb5: configuration #1 chosen from 1 choice
[ 1.259266] hub 5-0:1.0: USB hub found
[ 1.263775] hub 5-0:1.0: 2 ports detected
[ 1.268333] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.272944] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.272948] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.277485] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.282076] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 1.286608] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.291166] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.295727] usb usb6: Product: UHCI Host Controller
[ 1.300272] usb usb6: Manufacturer: Linux 2.6.30.4-15-desktop uhci_hcd
[ 1.301283] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.309541] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.309783] ACPI Warning (nspredef-0943): \_SB_.PCI0.SAT0.PRT0._GTF: Return type mismatch - found Integer, expected Buffer [20090320]
[ 1.309789] ata1.00: _GTF unexpected object type 0x1
[ 1.328775] usb usb6: configuration #1 chosen from 1 choice
[ 1.329267] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.329286] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.329305] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.331039] ata2.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.50, max UDMA/33
[ 1.341031] ata1.00: ATA-8: TOSHIBA MK3252GSX, LV010M, max UDMA/100
[ 1.341033] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.342702] ata2.00: configured for UDMA/33
[ 1.343563] ata1.00: _GTF unexpected object type 0x1
[ 1.343960] ata1.00: configured for UDMA/100
[ 1.344068] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5
[ 1.344199] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 1.344213] sd 0:0:0:0: [sda] Write Protect is off
[ 1.344215] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.344235] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.344323] sda:<3>ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4
[ 1.390695] ata2: irq_stat 0x40000001
[ 1.390698] ata2: hard resetting link
[ 1.390710] sda1 sda2
[ 1.416539] hub 6-0:1.0: USB hub found
[ 1.416588] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.417267] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.431104] hub 6-0:1.0: 2 ports detected
[ 1.436113] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.441103] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.441107] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.446065] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.451073] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 1.456079] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.461041] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.466015] usb usb7: Product: UHCI Host Controller
[ 1.470931] usb usb7: Manufacturer: Linux 2.6.30.4-15-desktop uhci_hcd
[ 1.475889] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.480837] usb usb7: configuration #1 chosen from 1 choice
[ 1.485791] hub 7-0:1.0: USB hub found
[ 1.490689] hub 7-0:1.0: 2 ports detected
[ 1.495673] alloc irq_desc for 18 on cpu 0 node 0
[ 1.495675] alloc kstat_irqs on cpu 0 node 0
[ 1.495679] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.500648] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.500651] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.505587] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.510587] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 1.515540] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.520492] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.525448] usb usb8: Product: UHCI Host Controller
[ 1.530359] usb usb8: Manufacturer: Linux 2.6.30.4-15-desktop uhci_hcd
[ 1.535297] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.540220] usb usb8: configuration #1 chosen from 1 choice
[ 1.545106] hub 8-0:1.0: USB hub found
[ 1.549838] hub 8-0:1.0: 2 ports detected
[ 1.554458] Initializing USB Mass Storage driver...
[ 1.554703] usb 1-1: New USB device found, idVendor=05e3, idProduct=0606
[ 1.554705] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.554707] usb 1-1: Product: USB2.0 Hub
[ 1.554744] usb 1-1: configuration #1 chosen from 1 choice
[ 1.577372] hub 1-1:1.0: USB hub found
[ 1.577387] usbcore: registered new interface driver usb-storage
[ 1.577389] USB Mass Storage support registered.
[ 1.577420] usbcore: registered new interface driver libusual
[ 1.577431] usbcore: registered new interface driver ums-alauda
[ 1.577442] usbcore: registered new interface driver ums-cypress
[ 1.577453] usbcore: registered new interface driver ums-datafab
[ 1.577463] usbcore: registered new interface driver ums-freecom
[ 1.577476] usbcore: registered new interface driver ums-isd200
[ 1.577487] usbcore: registered new interface driver ums-jumpshot
[ 1.577497] usbcore: registered new interface driver ums-karma
[ 1.577508] usbcore: registered new interface driver ums-onetouch
[ 1.577519] usbcore: registered new interface driver ums-sddr09
[ 1.577529] usbcore: registered new interface driver ums-sddr55
[ 1.577540] usbcore: registered new interface driver ums-usbat
[ 1.577582] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.645193] hub 1-1:1.0: 4 ports detected
[ 1.645536] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.647860] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.647865] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.647868] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.647870] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.647872] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.647909] mice: PS/2 mouse device common for all mice
[ 1.648007] rtc_cmos 00:05: RTC can wake from S4
[ 1.648043] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.648074] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.648084] cpuidle: using governor ladder
[ 1.648085] cpuidle: using governor menu
[ 1.648311] usbcore: registered new interface driver hiddev
[ 1.648323] usbcore: registered new interface driver usbhid
[ 1.648325] usbhid: v2.6:USB HID core driver
[ 1.702943] TCP cubic registered
[ 1.706406] NET: Registered protocol family 10
[ 1.710162] lo: Disabled Privacy Extensions
[ 1.713770] lib80211: common routines for IEEE802.11 drivers
[ 1.717123] lib80211_crypt: registered algorithm 'NULL'
[ 1.717180] PM: Checking image partition /dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1
[ 1.731279] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.863010] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 2.122138] usb 2-1: New USB device found, idVendor=07d1, idProduct=3c03
[ 2.125645] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.129176] usb 2-1: Product: 802.11 bg WLAN
[ 2.132659] usb 2-1: Manufacturer: Ralink
[ 2.136193] usb 2-1: configuration #1 chosen from 1 choice
[ 2.170018] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.177253] ata2.00: configured for UDMA/33
[ 2.182304] ata2: EH complete
[ 2.197757] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862AS 1.50 PQ: 0 ANSI: 5
[ 2.201430] PM: Resume from disk failed.
[ 2.201446] registered taskstats version 1
[ 2.205162] Magic number: 5:145:142
[ 2.208715] acpi device:13: hash matches
[ 2.212235] rtc_cmos 00:05: setting system clock to 2009-08-14 19:06:58 UTC (1250276818)
[ 2.215935] Freeing unused kernel memory: 1580k freed
[ 2.220103] Write protecting the kernel read-only data: 6960k
[ 2.241276] usb 2-4: new high speed USB device using ehci_hcd and address 3
[ 2.269522] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
[ 2.284283] udevd version 128 started
[ 2.373113] usb 2-4: New USB device found, idVendor=04f2, idProduct=b008
[ 2.377803] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.382390] usb 2-4: Product: Chicony USB 2.0 Camera
[ 2.386852] usb 2-4: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.391336] usb 2-4: SerialNumber: SN0001
[ 2.396037] usb 2-4: configuration #1 chosen from 1 choice
[ 2.540835] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1e0b1, caps: 0xd04711/0xa00000
[ 2.579131] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
[ 2.595499] PM: Marking nosave pages: 0000000000001000 - 0000000000006000
[ 2.595502] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 2.595506] PM: Marking nosave pages: 00000000b5aa1000 - 00000000b5aa7000
[ 2.595508] PM: Marking nosave pages: 00000000b5bba000 - 00000000b5c0f000
[ 2.595512] PM: Marking nosave pages: 00000000b5d08000 - 00000000b5f0f000
[ 2.595525] PM: Marking nosave pages: 00000000b5f18000 - 00000000b5f1f000
[ 2.595527] PM: Marking nosave pages: 00000000b5f65000 - 00000000b5f9f000
[ 2.595530] PM: Marking nosave pages: 00000000b5fe1000 - 00000000b5fff000
[ 2.595533] PM: Marking nosave pages: 00000000b6000000 - 0000000100000000
[ 2.596471] PM: Basic memory bitmaps created
[ 2.608023] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 2.723203] PM: Basic memory bitmaps freed
[ 2.730306] PM: Starting manual resume from disk
[ 2.730309] PM: Resume from partition 259:0
[ 2.730310] PM: Checking hibernation image.
[ 2.735672] PM: Resume from disk failed.
[ 2.802232] usb 3-2: New USB device found, idVendor=046d, idProduct=c50a
[ 2.808083] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.813947] usb 3-2: Product: USB Receiver
[ 2.819774] usb 3-2: Manufacturer: Logitech
[ 2.825550] usb 3-2: configuration #1 chosen from 1 choice
[ 2.851493] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2
[ 2.857381] generic-usb 0003:046D:C50A.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-2/input0
[ 2.931307] usb 1-1.1: new high speed USB device using ehci_hcd and address 4
[ 3.044289] usb 1-1.1: New USB device found, idVendor=059b, idProduct=0370
[ 3.050417] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 3.056529] usb 1-1.1: Product: External HD
[ 3.062575] usb 1-1.1: Manufacturer: Iomega
[ 3.068625] usb 1-1.1: SerialNumber: 152000000733
[ 3.074818] usb 1-1.1: configuration #1 chosen from 1 choice
[ 3.082424] scsi6 : SCSI emulation for USB Mass Storage devices
[ 3.088547] usb-storage: device found at 4
[ 3.088549] usb-storage: waiting for device to settle before scanning
[ 3.162529] usb 1-1.2: new high speed USB device using ehci_hcd and address 5
[ 3.229160] kjournald starting. Commit interval 5 seconds
[ 3.229298] EXT3 FS on sda2, internal journal
[ 3.229303] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.261389] usb 1-1.2: New USB device found, idVendor=1058, idProduct=1001
[ 3.267660] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.274004] usb 1-1.2: Product: External HDD
[ 3.280273] usb 1-1.2: Manufacturer: Western Digital
[ 3.286491] usb 1-1.2: SerialNumber: 574341505732323139323037
[ 3.292805] usb 1-1.2: configuration #1 chosen from 1 choice
[ 3.299445] scsi7 : SCSI emulation for USB Mass Storage devices
[ 3.306171] usb-storage: device found at 5
[ 3.306173] usb-storage: waiting for device to settle before scanning
[ 3.368266] usb 1-1.4: new high speed USB device using ehci_hcd and address 6
[ 3.450368] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0606
[ 3.456648] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.462933] usb 1-1.4: Product: USB2.0 Hub
[ 3.469264] usb 1-1.4: configuration #1 chosen from 1 choice
[ 3.475766] hub 1-1.4:1.0: USB hub found
[ 3.482239] hub 1-1.4:1.0: 4 ports detected
[ 3.763335] usb 1-1.4.2: new high speed USB device using ehci_hcd and address 7
[ 3.858946] usb 1-1.4.2: New USB device found, idVendor=05e3, idProduct=070e
[ 3.864872] usb 1-1.4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 3.870795] usb 1-1.4.2: Product: USB Storage
[ 3.876529] usb 1-1.4.2: SerialNumber: 000000009601
[ 3.882216] usb 1-1.4.2: configuration #1 chosen from 1 choice
[ 3.888384] scsi8 : SCSI emulation for USB Mass Storage devices
[ 3.893978] usb-storage: device found at 7
[ 3.893980] usb-storage: waiting for device to settle before scanning
[ 3.968315] usb 1-1.4.3: new high speed USB device using ehci_hcd and address 8
[ 4.048926] usb 1-1.4.3: New USB device found, idVendor=03f0, idProduct=5611
[ 4.054478] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.059923] usb 1-1.4.3: Product: Photosmart C3100 series
[ 4.065257] usb 1-1.4.3: Manufacturer: HP
[ 4.070523] usb 1-1.4.3: SerialNumber: MY68SC52KM04P9
[ 4.075826] usb 1-1.4.3: configuration #1 chosen from 1 choice
[ 4.081614] scsi9 : SCSI emulation for USB Mass Storage devices
[ 4.087001] usb-storage: device found at 8
[ 4.087003] usb-storage: waiting for device to settle before scanning
[ 4.160291] usb 1-1.4.4: new high speed USB device using ehci_hcd and address 9
[ 4.315395] usb 1-1.4.4: New USB device found, idVendor=0402, idProduct=5621
[ 4.320496] usb 1-1.4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 4.325563] usb 1-1.4.4: Product: USB 2.0 Storage Device
[ 4.330583] usb 1-1.4.4: SerialNumber: 00042222200000014305
[ 4.335645] usb 1-1.4.4: configuration #1 chosen from 1 choice
[ 4.340832] scsi10 : SCSI emulation for USB Mass Storage devices
[ 4.346037] usb-storage: device found at 9
[ 4.346039] usb-storage: waiting for device to settle before scanning
[ 6.337596] udevd version 128 started
[ 7.052486] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.057065] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 7.251650] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 7.257297] agpgart-intel 0000:00:00.0: detected 131068K stolen memory
[ 7.263993] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 7.336681] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 7.627296] cfg80211: Calling CRDA to update world regulatory domain
[ 7.644422] ACPI: AC Adapter [ACAD] (on-line)
[ 8.039228] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 8.044073] ACPI: Power Button [PWRF]
[ 8.091994] scsi 6:0:0:0: Direct-Access ST336032 0AS PQ: 0 ANSI: 2
[ 8.096983] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 8.102854] sd 6:0:0:0: [sdb] 703282608 512-byte hardware sectors: (360 GB/335 GiB)
[ 8.110229] sd 6:0:0:0: [sdb] Write Protect is off
[ 8.115274] sd 6:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 8.115276] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 8.120604] usb-storage: device scan complete
[ 8.123470] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 8.128285] sdb:<6>cfg80211: World regulatory domain updated:
[ 8.222368] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.227241] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.306591] scsi 7:0:0:0: Direct-Access WD 5000AAJ External 1.06 PQ: 0 ANSI: 0
[ 8.311774] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 8.317460] sd 7:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 8.324089] sd 7:0:0:0: [sdc] Write Protect is off
[ 8.329156] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 8.329158] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 8.335581] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 8.335587] usb-storage: device scan complete
[ 8.340555] sdc: sdc1
[ 8.346134] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 8.365280] sky2 driver version 1.22
[ 8.370406] sky2 0000:07:00.0: enabling device (0000 -> 0003)
[ 8.375324] sky2 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.380277] sky2 0000:07:00.0: setting latency timer to 64
[ 8.380359] sky2 0000:07:00.0: Yukon-2 FE+ chip revision 0
[ 8.385425] alloc irq_desc for 28 on cpu 0 node 0
[ 8.385427] alloc kstat_irqs on cpu 0 node 0
[ 8.385444] sky2 0000:07:00.0: irq 28 for MSI/MSI-X
[ 8.385674] iTCO_vendor_support: vendor-support=0
[ 8.386877] sky2 eth0: addr 00:23:8b:67:11:3b
[ 8.420965] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 8.458203] ACPI: Battery Slot [BAT1] (battery present)
[ 8.463232] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 8.468404] ACPI: Power Button [PWRB]
[ 8.473869] ACPI: WMI: Mapper loaded
[ 8.476325] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[ 8.476569] ACPI: Lid Switch [LID]
[ 8.528090] thermal LNXTHERM:01: registered as thermal_zone0
[ 8.533208] ACPI: Thermal Zone [THRM] (56 C)
[ 8.590225] usblp0: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5611
[ 8.595611] usbcore: registered new interface driver usblp
[ 8.625339] ACPI: SSDT 00000000b5f1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 8.631509] ACPI: SSDT 00000000b5f18620 00594 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 8.639093] ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
[ 8.644984] Monitor-Mwait will be used to enter C-1 state
[ 8.645010] Monitor-Mwait will be used to enter C-2 state
[ 8.645048] Monitor-Mwait will be used to enter C-3 state
[ 8.645051] Marking TSC unstable due to TSC halts in idle
[ 8.650588] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 8.656190] processor ACPI_CPU:00: registered as cooling_device0
[ 8.661567] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 8.667554] ACPI: SSDT 00000000b5f19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20061109)
[ 8.673621] ACPI: SSDT 00000000b5f19f20 0008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 8.679893] ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
[ 8.685859] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 8.692147] processor ACPI_CPU:01: registered as cooling_device1
[ 8.697693] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 8.894372] scsi 8:0:0:0: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0
[ 8.899948] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 8.905866] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[ 8.911701] scsi 8:0:0:1: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0
[ 8.917255] sd 8:0:0:1: Attached scsi generic sg5 type 0
[ 8.923352] sd 8:0:0:1: [sde] Attached SCSI removable disk
[ 8.929306] scsi 8:0:0:2: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0
[ 8.935147] sd 8:0:0:2: Attached scsi generic sg6 type 0
[ 8.941752] sd 8:0:0:2: [sdf] Attached SCSI removable disk
[ 8.947806] scsi 8:0:0:3: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0
[ 8.953540] sd 8:0:0:3: Attached scsi generic sg7 type 0
[ 8.960106] sd 8:0:0:3: [sdg] Attached SCSI removable disk
[ 8.965736] usb-storage: device scan complete
[ 9.087868] scsi 9:0:0:0: Direct-Access HP Photosmart C3180 1.00 PQ: 0 ANSI: 2
[ 9.093510] sd 9:0:0:0: Attached scsi generic sg8 type 0
[ 9.099741] sd 9:0:0:0: [sdh] Attached SCSI removable disk
[ 9.105532] usb-storage: device scan complete
[ 9.347368] scsi 10:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-W162C TS09 PQ: 0 ANSI: 0
[ 9.353167] scsi 10:0:0:0: Attached scsi generic sg9 type 5
[ 9.359665] usb-storage: device scan complete
[ 9.500062] Clocksource tsc unstable (delta = -366423927 ns)
[ 12.440114] sdb1
[ 12.445837] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 12.622105] ohci1394 0000:0a:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.679308] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[ff501000-ff5017ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 13.004508] Driver 'sr' needs updating - please use bus_type methods
[ 13.014032] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 13.020090] Uniform CD-ROM driver Revision: 3.20
[ 13.026304] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 13.035971] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 13.042218] sr 10:0:0:0: Attached scsi CD-ROM sr1
[ 13.043779] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 13.049930] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 13.056096] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.201543] sdhci: Secure Digital Host Controller Interface driver
[ 13.207411] sdhci: Copyright(c) Pierre Ossman
[ 13.360376] Linux video capture interface: v2.00
[ 13.617390] sdhci-pci 0000:0a:01.2: SDHCI controller found [1217:7120] (rev 2)
[ 13.623457] sdhci-pci 0000:0a:01.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.629432] mmc0: Unknown controller version (2). You may experience problems.
[ 13.635375] Registered led device: mmc0::
[ 13.641203] mmc0: SDHCI controller on PCI [0000:0a:01.2] using DMA
[ 13.800135] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds
[ 13.805978] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 13.811871] iwlagn 0000:08:00.0: enabling device (0000 -> 0002)
[ 13.817688] iwlagn 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.823437] iwlagn 0000:08:00.0: setting latency timer to 64
[ 13.823518] iwlagn 0000:08:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 13.851383] iwlagn 0000:08:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 13.857255] alloc irq_desc for 29 on cpu 0 node 0
[ 13.857258] alloc kstat_irqs on cpu 0 node 0
[ 13.857281] iwlagn 0000:08:00.0: irq 29 for MSI/MSI-X
[ 13.874056] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 13.938234] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[ 13.947323] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input7
[ 13.953346] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b240001542c7b]
[ 13.953431] usbcore: registered new interface driver uvcvideo
[ 13.959370] USB Video Class driver (v0.1.0)
[ 13.986181] alloc irq_desc for 22 on cpu 0 node 0
[ 13.986185] alloc kstat_irqs on cpu 0 node 0
[ 13.986193] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 13.992269] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 14.101647] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 14.107668] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 14.113555] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 14.231292] phy1: Selected rate control algorithm 'minstrel'
[ 14.231873] Registered led device: rt73usb-phy1::radio
[ 14.237774] Registered led device: rt73usb-phy1::assoc
[ 14.243513] Registered led device: rt73usb-phy1::quality
[ 14.249870] usbcore: registered new interface driver rt73usb
[ 14.765800] Adding 4200956k swap on /dev/sda1. Priority:-1 extents:1 across:4200956k
[ 15.798788] device-mapper: uevent: version 1.0.3
[ 15.804720] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 16.230998] loop: module loaded
[ 17.183110] fuse init (API version 7.11)
[ 35.530624] [drm] Initialized drm 1.1.0 20060810
[ 36.292178] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 36.292191] pci 0000:00:02.0: setting latency timer to 64
[ 36.318192] alloc irq_desc for 30 on cpu 0 node 0
[ 36.318196] alloc kstat_irqs on cpu 0 node 0
[ 36.318206] pci 0000:00:02.0: irq 30 for MSI/MSI-X
[ 36.378925] acpi device:05: registered as cooling_device2
[ 36.380238] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input11
[ 36.380351] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 36.380436] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 38.844509] Bluetooth: Core ver 2.15
[ 38.844554] NET: Registered protocol family 31
[ 38.844556] Bluetooth: HCI device and connection manager initialized
[ 38.844559] Bluetooth: HCI socket layer initialized
[ 40.322730] Bluetooth: L2CAP ver 2.13
[ 40.322737] Bluetooth: L2CAP socket layer initialized
[ 43.583448] Bluetooth: RFCOMM socket layer initialized
[ 43.583465] Bluetooth: RFCOMM TTY layer initialized
[ 43.583470] Bluetooth: RFCOMM ver 1.11
[ 43.686585] Bluetooth: SCO (Voice Link) ver 0.6
[ 43.686592] Bluetooth: SCO socket layer initialized
[ 44.554090] sky2 eth0: enabling interface
[ 44.554675] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 44.592500] rt73usb 2-1:1.0: firmware: requesting rt73.bin
[ 45.031727] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 45.034407] iwlagn 0000:08:00.0: firmware: requesting iwlwifi-5000-2.ucode
[ 45.138666] iwlagn 0000:08:00.0: loaded firmware version 8.24.2.12
[ 45.275467] Registered led device: iwl-phy0::radio
[ 45.275998] Registered led device: iwl-phy0::assoc
[ 45.278984] Registered led device: iwl-phy0::RX
[ 45.279048] Registered led device: iwl-phy0::TX
[ 45.285366] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 45.574810] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 45.574818] Bluetooth: BNEP filters: protocol multicast
[ 45.875977] NET: Registered protocol family 17
[ 46.787576] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 46.789359] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 47.916094] Bridge firewalling registered
[ 54.250106] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
[ 57.213542] eth0: no IPv6 routers present
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Regression in ACPI in 2.6.31-rc5
2009-08-13 3:53 ` Len Brown
@ 2009-08-16 3:00 ` Ricardo Jorge da Fonseca Marques Ferreira
2009-10-06 3:17 ` Len Brown
0 siblings, 1 reply; 6+ messages in thread
From: Ricardo Jorge da Fonseca Marques Ferreira @ 2009-08-16 3:00 UTC (permalink / raw)
To: Len Brown; +Cc: linux-kernel, linux-acpi
On Thursday 13 August 2009, Len Brown wrote:
> > I had two drivers stop working in 2.6.31 that were working fine in
> > 2.6.30. They are iwlagn and sky2. If i pass acpi=off to the kernel, they
> > work as expected.
>
> the bug report for this issue is here:
> http://bugzilla.kernel.org/show_bug.cgi?id=13940
>
> is it possible to bisect which commit between 2.6.30 and 2.6.31-rc5
> caused this regression?
git bisect tells me that commit 5d423ccd7ba4285f1084e91b26805e1d0ae978ed
(x86/pci: remove rounding quirk from e820_setup_gap()) caused the problem.
I built a kernel based on HEAD with that commit reverted and both drivers
work.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Regression in ACPI in 2.6.31-rc5
2009-08-16 3:00 ` Ricardo Jorge da Fonseca Marques Ferreira
@ 2009-10-06 3:17 ` Len Brown
2009-10-06 4:38 ` Yinghai Lu
0 siblings, 1 reply; 6+ messages in thread
From: Len Brown @ 2009-10-06 3:17 UTC (permalink / raw)
To: Ricardo Jorge da Fonseca Marques Ferreira
Cc: Linux Kernel Mailing List, linux-acpi, Yannick Roehlly,
Yinghai Lu, Jesse Barnes, Ivan Kokshaysky, Ingo Molnar, x86,
Linus Torvalds
From: Len Brown <len.brown@intel.com>
Subject: [PATCH] Revert "x86/pci: remove rounding quirk from e820_setup_gap()"
This reverts commit 5d423ccd7ba4285f1084e91b26805e1d0ae978ed.
because it caused multiple regressions in 2.6.31-rc1
http://bugzilla.kernel.org/show_bug.cgi?id=13940
Signed-off-by: Len Brown <len.brown@intel.com>
---
Yinghai,
is there a reason we should not revert the offending patch, per below?
thanks,
-Len
arch/x86/kernel/e820.c | 11 ++++++++---
1 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 85419bb..b322e30 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -617,7 +617,7 @@ __init int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize,
*/
__init void e820_setup_gap(void)
{
- unsigned long gapstart, gapsize;
+ unsigned long gapstart, gapsize, round;
int found;
gapstart = 0x10000000;
@@ -634,9 +634,14 @@ __init void e820_setup_gap(void)
#endif
/*
- * e820_reserve_resources_late protect stolen RAM already
+ * See how much we want to round up: start off with
+ * rounding to the next 1MB area.
*/
- pci_mem_start = gapstart;
+ round = 0x100000;
+ while ((gapsize >> 4) > round)
+ round += round;
+ /* Fun with two's complement */
+ pci_mem_start = (gapstart + round) & -round;
printk(KERN_INFO
"Allocating PCI resources starting at %lx (gap: %lx:%lx)\n",
--
1.6.5.rc2.17.gdbc1b
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: Regression in ACPI in 2.6.31-rc5
2009-10-06 3:17 ` Len Brown
@ 2009-10-06 4:38 ` Yinghai Lu
0 siblings, 0 replies; 6+ messages in thread
From: Yinghai Lu @ 2009-10-06 4:38 UTC (permalink / raw)
To: Len Brown
Cc: Ricardo Jorge da Fonseca Marques Ferreira,
Linux Kernel Mailing List, linux-acpi, Yannick Roehlly,
Jesse Barnes, Ivan Kokshaysky, Ingo Molnar, x86, Linus Torvalds
Len Brown wrote:
> From: Len Brown <len.brown@intel.com>
> Subject: [PATCH] Revert "x86/pci: remove rounding quirk from e820_setup_gap()"
>
> This reverts commit 5d423ccd7ba4285f1084e91b26805e1d0ae978ed.
>
> because it caused multiple regressions in 2.6.31-rc1
>
> http://bugzilla.kernel.org/show_bug.cgi?id=13940
>
> Signed-off-by: Len Brown <len.brown@intel.com>
> ---
>
> Yinghai,
> is there a reason we should not revert the offending patch, per below?
that patch is introduced fix another bug to get enough resource.
and that patch looks like reveal some bug in ACPI (?) because when
apci subsystem is enabled,
some BARs of some pci devices get cleared somehow.
actually there is patch that could workaround the problem too
---
arch/x86/kernel/e820.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
Index: linux-2.6/arch/x86/kernel/e820.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/e820.c
+++ linux-2.6/arch/x86/kernel/e820.c
@@ -1378,8 +1378,8 @@ static unsigned long ram_alignment(resou
if (mb < 16)
return 1024*1024;
- /* To 32MB for anything above that */
- return 32*1024*1024;
+ /* To 64MB for anything above that */
+ return 64*1024*1024;
}
#define MAX_RESOURCE_SIZE ((resource_size_t)-1)
but Linus wants to know why those BARs get cleared, and who is using
that extra 32M.
It seems some guys request acpidump from the reporter, and not sure
what is the result from their checking.
or need the reporter to boot with acpi.debug_layer=0x400000
acpi.debug_level=0x04000807
to pull out more result?
YH
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2009-10-06 4:38 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-08-14 19:36 Regression in ACPI in 2.6.31-rc5 Ricardo Jorge da Fonseca Marques Ferreira
-- strict thread matches above, loose matches on Subject: below --
2009-08-07 22:33 Ricardo Jorge da Fonseca Marques Ferreira
2009-08-13 3:53 ` Len Brown
2009-08-16 3:00 ` Ricardo Jorge da Fonseca Marques Ferreira
2009-10-06 3:17 ` Len Brown
2009-10-06 4:38 ` Yinghai Lu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).