From: Alexey Starikovskiy <astarikovskiy@suse.de>
To: Len Brown <lenb@kernel.org>
Cc: Linux-acpi@vger.kernel.org
Subject: [PATCH 1/4] ACPI: Battery: Add bit flags
Date: Thu, 15 Oct 2009 14:31:24 +0400 [thread overview]
Message-ID: <20091015103122.3853.34760.stgit@thinkpad> (raw)
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
---
drivers/acpi/battery.c | 26 ++++++++++++++------------
1 files changed, 14 insertions(+), 12 deletions(-)
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 3f4602b..7adc1fa 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -88,10 +88,13 @@ static const struct acpi_device_id battery_device_ids[] = {
MODULE_DEVICE_TABLE(acpi, battery_device_ids);
-/* For buggy DSDTs that report negative 16-bit values for either charging
- * or discharging current and/or report 0 as 65536 due to bad math.
- */
-#define QUIRK_SIGNED16_CURRENT 0x0001
+enum {
+ ACPI_BATTERY_ALARM_PRESENT,
+ /* For buggy DSDTs that report negative 16-bit values for either charging
+ * or discharging current and/or report 0 as 65536 due to bad math.
+ */
+ ACPI_BATTERY_QUIRK_SIGNED16_CURRENT,
+};
struct acpi_battery {
struct mutex lock;
@@ -118,8 +121,7 @@ struct acpi_battery {
char oem_info[32];
int state;
int power_unit;
- u8 alarm_present;
- long quirks;
+ unsigned long flags;
};
#define to_acpi_battery(x) container_of(x, struct acpi_battery, bat);
@@ -399,7 +401,7 @@ static int acpi_battery_get_state(struct acpi_battery *battery)
battery->update_time = jiffies;
kfree(buffer.pointer);
- if ((battery->quirks & QUIRK_SIGNED16_CURRENT) &&
+ if (test_bit(ACPI_BATTERY_QUIRK_SIGNED16_CURRENT, &battery->flags) &&
battery->rate_now != -1)
battery->rate_now = abs((s16)battery->rate_now);
@@ -412,7 +414,8 @@ static int acpi_battery_set_alarm(struct acpi_battery *battery)
union acpi_object arg0 = { .type = ACPI_TYPE_INTEGER };
struct acpi_object_list arg_list = { 1, &arg0 };
- if (!acpi_battery_present(battery)|| !battery->alarm_present)
+ if (!acpi_battery_present(battery)||
+ !test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags))
return -ENODEV;
arg0.integer.value = battery->alarm;
@@ -437,10 +440,10 @@ static int acpi_battery_init_alarm(struct acpi_battery *battery)
/* See if alarms are supported, and if so, set default */
status = acpi_get_handle(battery->device->handle, "_BTP", &handle);
if (ACPI_FAILURE(status)) {
- battery->alarm_present = 0;
+ clear_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags);
return 0;
}
- battery->alarm_present = 1;
+ set_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags);
if (!battery->alarm)
battery->alarm = battery->design_capacity_warning;
return acpi_battery_set_alarm(battery);
@@ -510,9 +513,8 @@ static void sysfs_remove_battery(struct acpi_battery *battery)
static void acpi_battery_quirks(struct acpi_battery *battery)
{
- battery->quirks = 0;
if (dmi_name_in_vendors("Acer") && battery->power_unit) {
- battery->quirks |= QUIRK_SIGNED16_CURRENT;
+ set_bit(ACPI_BATTERY_QUIRK_SIGNED16_CURRENT, &battery->flags);
}
}
next reply other threads:[~2009-10-15 10:32 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-15 10:31 Alexey Starikovskiy [this message]
2009-10-15 10:31 ` [PATCH 2/4] POWER: Add support for cycle_count Alexey Starikovskiy
2010-01-15 21:59 ` Len Brown
2009-10-15 10:31 ` [PATCH 3/4] ACPI: SBS: Export cycle_count Alexey Starikovskiy
2010-01-15 21:59 ` Len Brown
2009-10-15 10:31 ` [PATCH 4/4] ACPI: Battery: Add support for _BIX extended info method Alexey Starikovskiy
2009-10-16 9:08 ` Alan Jenkins
2009-10-16 9:46 ` [PATCH] " Alexey Starikovskiy
2009-10-17 15:41 ` [PATCH 4/4] " Henrique de Moraes Holschuh
2010-03-14 22:15 ` Alexey Starikovskiy
2010-03-15 11:38 ` Henrique de Moraes Holschuh
2010-03-15 20:17 ` Alexey Starikovskiy
2010-03-16 0:12 ` Henrique de Moraes Holschuh
2010-01-15 22:03 ` Len Brown
2010-01-15 21:59 ` [PATCH 1/4] ACPI: Battery: Add bit flags Len Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091015103122.3853.34760.stgit@thinkpad \
--to=astarikovskiy@suse.de \
--cc=Linux-acpi@vger.kernel.org \
--cc=lenb@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).