From: Anisse Astier <anisse@astier.eu>
To: linux-input@vger.kernel.org, linux-acpi@vger.kernel.org
Cc: Len Brown <lenb@kernel.org>,
Carlos Corbacho <carlos@strangeworlds.co.uk>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>
Subject: [RFC PATCH 2/2] Input: msi-wmi - switch to using sparse keymap library
Date: Wed, 2 Dec 2009 19:28:12 +0100 [thread overview]
Message-ID: <20091202192812.7e9919fb@destiny.ordissimo> (raw)
In-Reply-To: <20091202192603.3e1de98a@destiny.ordissimo>
Signed-off-by: Anisse Astier <anisse@astier.eu>
---
drivers/platform/x86/Kconfig | 1 +
drivers/platform/x86/msi-wmi.c | 123 +++++++++++-----------------------------
2 files changed, 35 insertions(+), 89 deletions(-)
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index fe142af..d6925ad 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -446,6 +446,7 @@ config MSI_WMI
tristate "MSI WMI extras"
depends on ACPI_WMI
depends on INPUT
+ select INPUT_SPARSEKMAP
---help---
Say Y here if you want to support WMI-based hotkeys on MSI all-in-one
WindTop AE1900-WT.
diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c
index fb6d5bd..5dcb6fb 100644
--- a/drivers/platform/x86/msi-wmi.c
+++ b/drivers/platform/x86/msi-wmi.c
@@ -1,6 +1,7 @@
/*
* MSI WMI hotkeys
*
+ * Copyright (C) 2009 Anisse Astier <anisse@astier.eu>
* Copyright (C) 2009 Jérôme Pouiller <jezz@sysmic.org>
*
* Portions based on hp-wmi.c:
@@ -28,51 +29,25 @@
#include <linux/kernel.h>
#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
#include <linux/acpi.h>
#include <linux/jiffies.h>
#define MSIWMI_EVENT_GUID "b6f3eef2-3d2f-49dc-9de3-85bce18c62f2"
-struct key_entry {
- u16 code;
- u16 keycode;
-};
-
-static struct key_entry msi_wmi_keymap[] = {
+static const struct key_entry msi_wmi_keymap[] = {
/*Brightness keys should be used for a backlight driver*/
- {208, KEY_BRIGHTNESSUP},
- {209, KEY_BRIGHTNESSDOWN},
- {210, KEY_VOLUMEUP},
- {211, KEY_VOLUMEDOWN},
- {0}
+ {KE_KEY, 208, {KEY_BRIGHTNESSUP} },
+ {KE_KEY, 209, {KEY_BRIGHTNESSDOWN} },
+ {KE_KEY, 210, {KEY_VOLUMEUP} },
+ {KE_KEY, 211, {KEY_VOLUMEDOWN} },
+ {KE_END, 0}
};
static struct input_dev *msi_wmi_input_dev;
static unsigned long long msi_wmi_time_last_press;
static unsigned pression_timeout = 10;
-static struct key_entry *msi_wmi_get_entry_by_scancode(int code)
-{
- struct key_entry *key;
-
- for (key = msi_wmi_keymap; key->code; key++)
- if (code == key->code)
- return key;
-
- return NULL;
-}
-
-static struct key_entry *msi_wmi_get_entry_by_keycode(int keycode)
-{
- struct key_entry *key;
-
- for (key = msi_wmi_keymap; key->code; key++)
- if (keycode == key->keycode)
- return key;
-
- return NULL;
-}
-
static void msi_wmi_notify(u32 value, void *context)
{
struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -94,7 +69,8 @@ static void msi_wmi_notify(u32 value, void *context)
"MSI WMI: event correctly received: %llu\n",
obj->integer.value);
msi_wmi_time_last_press = get_jiffies_64();
- key = msi_wmi_get_entry_by_scancode(obj->integer.value);
+ key = sparse_keymap_entry_from_scancode(msi_wmi_input_dev,
+ obj->integer.value);
input_report_key(msi_wmi_input_dev, key->keycode, 1);
input_sync(msi_wmi_input_dev);
input_report_key(msi_wmi_input_dev, key->keycode, 0);
@@ -102,42 +78,8 @@ static void msi_wmi_notify(u32 value, void *context)
}
}
-static int msi_wmi_getkeycode(struct input_dev *dev, int scancode, int *keycode)
-{
- struct key_entry *key = msi_wmi_get_entry_by_scancode(scancode);
-
- if (key && key->code) {
- *keycode = key->keycode;
- return 0;
- }
-
- return -EINVAL;
-}
-
-static int msi_wmi_setkeycode(struct input_dev *dev, int scancode, int keycode)
-{
- struct key_entry *key;
- int old_keycode;
-
- if (keycode < 0 || keycode > KEY_MAX)
- return -EINVAL;
-
- key = msi_wmi_get_entry_by_scancode(scancode);
- if (key && key->code) {
- old_keycode = key->keycode;
- key->keycode = keycode;
- set_bit(keycode, dev->keybit);
- if (!msi_wmi_get_entry_by_keycode(old_keycode))
- clear_bit(old_keycode, dev->keybit);
- return 0;
- }
-
- return -EINVAL;
-}
-
static int __init msi_wmi_input_setup(void)
{
- struct key_entry *key;
int err;
msi_wmi_input_dev = input_allocate_device();
@@ -145,45 +87,48 @@ static int __init msi_wmi_input_setup(void)
msi_wmi_input_dev->name = "MSI WMI hotkeys";
msi_wmi_input_dev->phys = "wmi/input0";
msi_wmi_input_dev->id.bustype = BUS_HOST;
- msi_wmi_input_dev->getkeycode = msi_wmi_getkeycode;
- msi_wmi_input_dev->setkeycode = msi_wmi_setkeycode;
- for (key = msi_wmi_keymap; key->code; key++) {
- set_bit(EV_KEY, msi_wmi_input_dev->evbit);
- set_bit(key->keycode, msi_wmi_input_dev->keybit);
- }
+ err = sparse_keymap_setup(msi_wmi_input_dev, msi_wmi_keymap, NULL);
+ if (err)
+ goto err_free_dev;
+ err = wmi_install_notify_handler(MSIWMI_EVENT_GUID,
+ msi_wmi_notify, NULL);
+ if (err) {
+ printk(KERN_ERR
+ "MSI WMI: Error while installing notify handler\n");
+ goto err_free_keymap;
+ }
err = input_register_device(msi_wmi_input_dev);
-
if (err)
- input_free_device(msi_wmi_input_dev);
+ goto err_uninstall_notifier;
+
+ return 0;
+
+err_uninstall_notifier:
+ wmi_remove_notify_handler(MSIWMI_EVENT_GUID);
+err_free_keymap:
+ sparse_keymap_free(msi_wmi_input_dev);
+err_free_dev:
+ input_free_device(msi_wmi_input_dev);
return err;
}
static int __init msi_wmi_init(void)
{
- int err;
+ int err = 0;
msi_wmi_time_last_press = get_jiffies_64();
if (!wmi_has_guid(MSIWMI_EVENT_GUID)) {
printk(KERN_ERR
"This machine doesn't have MSI-hotkeys through WMI\n");
- goto load_error;
- }
- err = wmi_install_notify_handler(MSIWMI_EVENT_GUID,
- msi_wmi_notify, NULL);
- if (err) {
- printk(KERN_ERR
- "MSI WMI: Error while installing notify handler\n");
- goto load_error;
+ return -ENODEV;
}
- msi_wmi_input_setup();
+ err = msi_wmi_input_setup();
- return 0;
-load_error:
- return -ENODEV;
+ return err;
}
static void __exit msi_wmi_exit(void)
--
1.6.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2009-12-02 18:29 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-02 18:26 [RFC PATCH 1/2] Input: add msi-wmi driver to support hotkeys in MSI Windtop AE1900-WT Anisse Astier
2009-12-02 18:28 ` Anisse Astier [this message]
2009-12-02 18:48 ` [RFC PATCH 2/2] Input: msi-wmi - switch to using sparse keymap library Dmitry Torokhov
2009-12-03 3:11 ` [RFC PATCH 1/2] Input: add msi-wmi driver to support hotkeys in MSI Windtop AE1900-WT Dmitry Torokhov
2009-12-03 9:08 ` Anisse Astier
2009-12-03 9:34 ` Dmitry Torokhov
2009-12-03 16:49 ` Thomas Renninger
2009-12-04 10:15 ` Anisse Astier
2009-12-04 10:55 ` Thomas Renninger
2009-12-04 13:51 ` Anisse Astier
2009-12-04 15:20 ` Thomas Renninger
2009-12-04 15:35 ` Anisse Astier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091202192812.7e9919fb@destiny.ordissimo \
--to=anisse@astier.eu \
--cc=carlos@strangeworlds.co.uk \
--cc=dmitry.torokhov@gmail.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox