From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Rafael J. Wysocki" Subject: Re: [Q] How to tell we're using the KMS (during suspend/resume) outside the graphics driver Date: Tue, 9 Mar 2010 12:34:59 +0100 Message-ID: <201003091234.59598.rjw@sisk.pl> References: <201003062236.09801.rjw@sisk.pl> <68676e01003090301s5bb40d4hac1224a9658339ac@mail.gmail.com> Mime-Version: 1.0 Content-Type: Text/Plain; charset="utf-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <68676e01003090301s5bb40d4hac1224a9658339ac@mail.gmail.com> Sender: linux-pci-owner@vger.kernel.org To: Luca Tettamanti Cc: LKML , Matthew Garrett , Linux PCI , Jesse Barnes , ACPI Devel Maling List , pm list , dri-devel@lists.sourceforge.net List-Id: linux-acpi@vger.kernel.org On Tuesday 09 March 2010, Luca Tettamanti wrote: > On Sat, Mar 6, 2010 at 10:36 PM, Rafael J. Wysocki wrote: > > Hi, > > > > For at least two reasons it would be beneficial for some code outisde the > > graphics driver(s) to know if the KMS are used. > > > > First, in the non-KMS (ie. UMS) case we probably wouldn't want to call > > acpi_video_resume(), because that has a potential to mess up with the GPU > > (it actually is known to do that on at least one system). > > > > Second, in the KMS case, we'd be able to skip the kernel VT switch, because > > the KMS driver uses its own framebuffer anyway. > > > > So, is there any reasonable way to check that from the outside of the graphics > > driver? It should be general enough to cover the cases when there are two > > graphics adapters with different drivers in the system and so forth. > > Inside the kernel? If you have a struct pci_dev you can get the > associated struct drm_device with pci_get_drvdata and then check the > KMS feature: drm_core_check_feature(dev, DRIVER_MODESET). Yeah, I know that. > I'm note sure how to check that a device is graphic card though :| Well, that's the "outside of the graphics driver" part of my question. :-) Rafael