From: Bjorn Helgaas <bjorn.helgaas@hp.com>
To: Clemens Ladisch <clemens@ladisch.de>
Cc: linux-acpi@vger.kernel.org, Vojtech Pavlik <vojtech@suse.cz>,
linux-kernel@vger.kernel.org,
"Venkatesh Pallipadi (Venki)" <venkatesh.pallipadi@intel.com>
Subject: [PATCH 1/3] hpet: convert to PNP driver
Date: Wed, 17 Mar 2010 11:35:00 -0600 [thread overview]
Message-ID: <20100317173500.31124.53755.stgit@bob.kio> (raw)
In-Reply-To: <20100317173329.31124.69795.stgit@bob.kio>
PNPACPI already parses _CRS, and does a more complete job than we did here,
so let's just take advantage of that.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
---
drivers/char/hpet.c | 103 +++++++++++++--------------------------------------
1 files changed, 27 insertions(+), 76 deletions(-)
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index e481c59..65a9aa8 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -31,6 +31,7 @@
#include <linux/seq_file.h>
#include <linux/bitops.h>
#include <linux/clocksource.h>
+#include <linux/pnp.h>
#include <asm/current.h>
#include <asm/uaccess.h>
@@ -40,7 +41,6 @@
#include <asm/div64.h>
#include <linux/acpi.h>
-#include <acpi/acpi_bus.h>
#include <linux/hpet.h>
/*
@@ -899,100 +899,53 @@ int hpet_alloc(struct hpet_data *hdp)
return 0;
}
-static acpi_status hpet_resources(struct acpi_resource *res, void *data)
+static int hpet_pnp_add(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
- struct hpet_data *hdp;
- acpi_status status;
- struct acpi_resource_address64 addr;
-
- hdp = data;
-
- status = acpi_resource_to_address64(res, &addr);
-
- if (ACPI_SUCCESS(status)) {
- hdp->hd_phys_address = addr.minimum;
- hdp->hd_address = ioremap(addr.minimum, addr.address_length);
-
- if (hpet_is_known(hdp)) {
- iounmap(hdp->hd_address);
- return AE_ALREADY_EXISTS;
- }
- } else if (res->type == ACPI_RESOURCE_TYPE_FIXED_MEMORY32) {
- struct acpi_resource_fixed_memory32 *fixmem32;
-
- fixmem32 = &res->data.fixed_memory32;
- if (!fixmem32)
- return AE_NO_MEMORY;
+ struct hpet_data data;
+ struct resource *mem, *irq;
+ int i;
- hdp->hd_phys_address = fixmem32->address;
- hdp->hd_address = ioremap(fixmem32->address,
- HPET_RANGE_SIZE);
+ memset(&data, 0, sizeof(data));
- if (hpet_is_known(hdp)) {
- iounmap(hdp->hd_address);
- return AE_ALREADY_EXISTS;
- }
- } else if (res->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) {
- struct acpi_resource_extended_irq *irqp;
- int i, irq;
+ mem = pnp_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!mem)
+ return -ENODEV;
- irqp = &res->data.extended_irq;
+ data.hd_phys_address = mem->start;
- for (i = 0; i < irqp->interrupt_count; i++) {
- irq = acpi_register_gsi(NULL, irqp->interrupts[i],
- irqp->triggering, irqp->polarity);
- if (irq < 0)
- return AE_ERROR;
+ if (hpet_is_known(&data))
+ return -EBUSY;
- hdp->hd_irq[hdp->hd_nirqs] = irq;
- hdp->hd_nirqs++;
- }
+ i = 0;
+ while (data.hd_nirqs < ARRAY_SIZE(data.hd_irq)) {
+ irq = pnp_get_resource(dev, IORESOURCE_IRQ, i++);
+ if (pnp_resource_valid(irq) && pnp_resource_enabled(irq))
+ data.hd_irq[data.hd_nirqs++] = irq->start;
}
-
- return AE_OK;
-}
-
-static int hpet_acpi_add(struct acpi_device *device)
-{
- acpi_status result;
- struct hpet_data data;
-
- memset(&data, 0, sizeof(data));
-
- result =
- acpi_walk_resources(device->handle, METHOD_NAME__CRS,
- hpet_resources, &data);
-
- if (ACPI_FAILURE(result))
+ if (!data.hd_nirqs)
return -ENODEV;
- if (!data.hd_address || !data.hd_nirqs) {
- printk("%s: no address or irqs in _CRS\n", __func__);
- return -ENODEV;
- }
+ data.hd_address = ioremap(mem->start, resource_size(mem));
return hpet_alloc(&data);
}
-static int hpet_acpi_remove(struct acpi_device *device, int type)
+static void hpet_pnp_remove(struct pnp_dev *dev)
{
/* XXX need to unregister clocksource, dealloc mem, etc */
- return -EINVAL;
}
-static const struct acpi_device_id hpet_device_ids[] = {
+static const struct pnp_device_id hpet_device_ids[] = {
{"PNP0103", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, hpet_device_ids);
-static struct acpi_driver hpet_acpi_driver = {
+static struct pnp_driver hpet_pnp_driver = {
.name = "hpet",
- .ids = hpet_device_ids,
- .ops = {
- .add = hpet_acpi_add,
- .remove = hpet_acpi_remove,
- },
+ .id_table = hpet_device_ids,
+ .probe = hpet_pnp_add,
+ .remove = hpet_pnp_remove,
};
static struct miscdevice hpet_misc = { HPET_MINOR, "hpet", &hpet_fops };
@@ -1007,7 +960,7 @@ static int __init hpet_init(void)
sysctl_header = register_sysctl_table(dev_root);
- result = acpi_bus_register_driver(&hpet_acpi_driver);
+ result = pnp_register_driver(&hpet_pnp_driver);
if (result < 0) {
if (sysctl_header)
unregister_sysctl_table(sysctl_header);
@@ -1020,13 +973,11 @@ static int __init hpet_init(void)
static void __exit hpet_exit(void)
{
- acpi_bus_unregister_driver(&hpet_acpi_driver);
+ pnp_unregister_driver(&hpet_pnp_driver);
if (sysctl_header)
unregister_sysctl_table(sysctl_header);
misc_deregister(&hpet_misc);
-
- return;
}
module_init(hpet_init);
next prev parent reply other threads:[~2010-03-17 17:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-17 17:34 [PATCH 0/3] hpet: convert from ACPI to PNP driver Bjorn Helgaas
2010-03-17 17:35 ` Bjorn Helgaas [this message]
2010-03-17 22:18 ` [PATCH 1/3] hpet: convert " Venkatesh Pallipadi
2010-03-17 23:00 ` Bjorn Helgaas
2010-03-17 17:35 ` [PATCH 2/3] hpet: pass physical address, not entire hpet_data, to hpet_is_known() Bjorn Helgaas
2010-03-18 7:27 ` Clemens Ladisch
2010-03-17 17:35 ` [PATCH 3/3] MAINTAINERS: remove obsolete HPET ACPI entry Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100317173500.31124.53755.stgit@bob.kio \
--to=bjorn.helgaas@hp.com \
--cc=clemens@ladisch.de \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=venkatesh.pallipadi@intel.com \
--cc=vojtech@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox