From: Bjorn Helgaas <bjorn.helgaas@hp.com>
To: "H. Peter Anvin" <hpa@zytor.com>,
Jesse Barnes <jbarnes@virtuousgeek.org>,
Len Brown <lenb@kernel.org>
Cc: linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org
Subject: [PATCH 2/2] x86/PCI: compute Address Space length rather than using _LEN
Date: Tue, 27 Apr 2010 14:45:43 -0600 [thread overview]
Message-ID: <20100427204543.23753.60113.stgit@bob.kio> (raw)
In-Reply-To: <20100427202122.23753.63421.stgit@bob.kio>
ACPI _CRS Address Space Descriptors have _MIN, _MAX, and _LEN. Linux has
been computing Address Spaces as [_MIN to _MIN + _LEN - 1]. Based on the
tests in the bug reports below, Windows apparently uses [_MIN to _MAX].
Per spec (ACPI 4.0, Table 6-40), for _CRS fixed-size, fixed location
descriptors, "_LEN must be (_MAX - _MIN + 1)", and when that's true, it
doesn't matter which way we compute the end. But of course, there are
BIOSes that don't follow this rule, and we're better off if Linux handles
those exceptions the same way as Windows.
This patch makes Linux use [_MIN to _MAX], as Windows seems to do. This
effectively reverts d558b483d5 and 03db42adfe and replaces them with
simpler code.
https://bugzilla.kernel.org/show_bug.cgi?id=14337 (round)
https://bugzilla.kernel.org/show_bug.cgi?id=15480 (truncate)
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
---
arch/x86/pci/acpi.c | 40 ++--------------------------------------
1 files changed, 2 insertions(+), 38 deletions(-)
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 44f83ce..31930fd 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -121,30 +121,6 @@ count_resource(struct acpi_resource *acpi_res, void *data)
return AE_OK;
}
-static void
-align_resource(struct acpi_device *bridge, struct resource *res)
-{
- int align = (res->flags & IORESOURCE_MEM) ? 16 : 4;
-
- /*
- * Host bridge windows are not BARs, but the decoders on the PCI side
- * that claim this address space have starting alignment and length
- * constraints, so fix any obvious BIOS goofs.
- */
- if (!IS_ALIGNED(res->start, align)) {
- dev_printk(KERN_DEBUG, &bridge->dev,
- "host bridge window %pR invalid; "
- "aligning start to %d-byte boundary\n", res, align);
- res->start &= ~(align - 1);
- }
- if (!IS_ALIGNED(res->end + 1, align)) {
- dev_printk(KERN_DEBUG, &bridge->dev,
- "host bridge window %pR invalid; "
- "aligning end to %d-byte boundary\n", res, align);
- res->end = ALIGN(res->end, align) - 1;
- }
-}
-
static acpi_status
setup_resource(struct acpi_resource *acpi_res, void *data)
{
@@ -154,7 +130,7 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
acpi_status status;
unsigned long flags;
struct resource *root, *conflict;
- u64 start, end, max_len;
+ u64 start, end;
status = resource_to_addr(acpi_res, &addr);
if (!ACPI_SUCCESS(status))
@@ -171,19 +147,8 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
} else
return AE_OK;
- max_len = addr.maximum - addr.minimum + 1;
- if (addr.address_length > max_len) {
- dev_printk(KERN_DEBUG, &info->bridge->dev,
- "host bridge window length %#llx doesn't fit in "
- "%#llx-%#llx, trimming\n",
- (unsigned long long) addr.address_length,
- (unsigned long long) addr.minimum,
- (unsigned long long) addr.maximum);
- addr.address_length = max_len;
- }
-
start = addr.minimum + addr.translation_offset;
- end = start + addr.address_length - 1;
+ end = addr.maximum + addr.translation_offset;
res = &info->res[info->res_num];
res->name = info->name;
@@ -191,7 +156,6 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
res->start = start;
res->end = end;
res->child = NULL;
- align_resource(info->bridge, res);
if (!pci_use_crs) {
dev_printk(KERN_DEBUG, &info->bridge->dev,
next prev parent reply other threads:[~2010-04-27 20:46 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-27 20:45 [PATCH 0/2] PNPACPI, x86/PCI: handle _CRS windows like Windows does Bjorn Helgaas
2010-04-27 20:45 ` [PATCH 1/2] PNPACPI: compute Address Space length rather than using _LEN Bjorn Helgaas
2010-04-27 20:45 ` Bjorn Helgaas [this message]
2010-04-29 1:48 ` [PATCH 0/2] PNPACPI, x86/PCI: handle _CRS windows like Windows does Len Brown
2010-04-29 15:42 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100427204543.23753.60113.stgit@bob.kio \
--to=bjorn.helgaas@hp.com \
--cc=hpa@zytor.com \
--cc=jbarnes@virtuousgeek.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).