From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Len Brown <lenb@kernel.org>
Cc: ACPI Devel Maling List <linux-acpi@vger.kernel.org>,
"Moore, Robert" <robert.moore@intel.com>,
Lin Ming <ming.m.lin@intel.com>
Subject: [Resend][PATCH] ACPI / ACPICA: Fix reference counting problems with GPE handlers
Date: Tue, 3 Aug 2010 23:55:14 +0200 [thread overview]
Message-ID: <201008032355.14414.rjw@sisk.pl> (raw)
From: Rafael J. Wysocki <rjw@sisk.pl>
If a handler is installed for a GPE associated with an AML method and
such that it cannot wake up the system from sleep states, the GPE
remains enabled after the handler has been installed, although it
should be disabled in that case to avoid spurious execution of the
handler.
Fix this issue by making acpi_install_gpe_handler() disable GPEs
that were previously associated with AML methods and cannot wake up
the system from sleep states.
Analogously, make acpi_remove_gpe_handler() enable the GPEs that
are associated with AML methods after their handlers have been
removed and cannot wake up the system from sleep states. In addition
to that, fix a code ordering issue in acpi_remove_gpe_handler() that
renders the locking ineffective (ACPI_MTX_EVENTS is released
temporarily in the middle of the routine to wait for the completion
of events already in progress).
For this purpose introduce acpi_raw_disable_gpe() and
acpi_raw_enable_gpe() to be called with acpi_gbl_gpe_lock held
and rework acpi_disable_gpe() and acpi_enable_gpe(), respectively, to
use them. Also rework acpi_gpe_can_wake() to use
acpi_raw_disable_gpe() instead of calling acpi_disable_gpe() after
releasing the lock to avoid the possible theoretical race with
acpi_install_gpe_handler().
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: "Moore, Robert" <robert.moore@intel.com>
Cc: Lin Ming <ming.m.lin@intel.com>
---
Hi Len,
This patch has been rebased on top of the current 'test' branch of the
linux-acpi-2.6 tree.
Please apply.
Thanks,
Rafael
---
drivers/acpi/acpica/acevents.h | 4 ++
drivers/acpi/acpica/aclocal.h | 1
drivers/acpi/acpica/evgpe.c | 73 ++++++++++++++++++++++++++++++++++++++
drivers/acpi/acpica/evxface.c | 77 +++++++++++++++++++++++++++--------------
drivers/acpi/acpica/evxfevnt.c | 62 ++++-----------------------------
5 files changed, 139 insertions(+), 78 deletions(-)
Index: linux-2.6/drivers/acpi/acpica/evxface.c
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/evxface.c
+++ linux-2.6/drivers/acpi/acpica/evxface.c
@@ -691,12 +691,22 @@ acpi_install_gpe_handler(acpi_handle gpe
return_ACPI_STATUS(status);
}
+ /* Allocate memory for the handler object */
+
+ handler = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_handler_info));
+ if (!handler) {
+ status = AE_NO_MEMORY;
+ goto unlock_and_exit;
+ }
+
+ flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
+
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
+ goto free_and_exit;
}
/* Make sure that there isn't a handler there already */
@@ -704,24 +714,30 @@ acpi_install_gpe_handler(acpi_handle gpe
if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
ACPI_GPE_DISPATCH_HANDLER) {
status = AE_ALREADY_EXISTS;
- goto unlock_and_exit;
+ goto free_and_exit;
}
/* Allocate and init handler object */
- handler = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_handler_info));
- if (!handler) {
- status = AE_NO_MEMORY;
- goto unlock_and_exit;
- }
-
handler->address = address;
handler->context = context;
handler->method_node = gpe_event_info->dispatch.method_node;
+ handler->orig_flags = gpe_event_info->flags &
+ (ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK);
+
+ /*
+ * If the GPE is associated with a method and it cannot wake up the
+ * system from sleep states, it was enabled automatically during
+ * initialization, so it has to be disabled now to avoid spurious
+ * execution of the handler.
+ */
+
+ if ((handler->orig_flags & ACPI_GPE_DISPATCH_METHOD)
+ && !(gpe_event_info->flags & ACPI_GPE_CAN_WAKE))
+ (void)acpi_raw_disable_gpe(gpe_event_info);
/* Install the handler */
- flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
gpe_event_info->dispatch.handler = handler;
/* Setup up dispatch flags to indicate handler (vs. method) */
@@ -735,6 +751,11 @@ acpi_install_gpe_handler(acpi_handle gpe
unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
+
+free_and_exit:
+ acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
+ ACPI_FREE(handler);
+ goto unlock_and_exit;
}
ACPI_EXPORT_SYMBOL(acpi_install_gpe_handler)
@@ -770,11 +791,17 @@ acpi_remove_gpe_handler(acpi_handle gpe_
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
+ /* Make sure all deferred tasks are completed */
+
+ acpi_os_wait_events_complete(NULL);
+
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
+ flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
+
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
@@ -798,34 +825,34 @@ acpi_remove_gpe_handler(acpi_handle gpe_
goto unlock_and_exit;
}
- /* Make sure all deferred tasks are completed */
-
- (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
- acpi_os_wait_events_complete(NULL);
- status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
/* Remove the handler */
- flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
handler = gpe_event_info->dispatch.handler;
/* Restore Method node (if any), set dispatch flags */
gpe_event_info->dispatch.method_node = handler->method_node;
- gpe_event_info->flags &= ~ACPI_GPE_DISPATCH_MASK; /* Clear bits */
- if (handler->method_node) {
- gpe_event_info->flags |= ACPI_GPE_DISPATCH_METHOD;
- }
- acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
+ gpe_event_info->flags &=
+ ~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK);
+ gpe_event_info->flags |= handler->orig_flags;
+
+ /*
+ * If the GPE was previously associated with a method and it cannot wake
+ * up the system from sleep states, it should be enabled at this point
+ * to restore the post-initialization configuration.
+ */
+
+ if ((handler->orig_flags & ACPI_GPE_DISPATCH_METHOD)
+ && !(gpe_event_info->flags & ACPI_GPE_CAN_WAKE))
+ (void)acpi_raw_enable_gpe(gpe_event_info);
/* Now we can free the handler object */
ACPI_FREE(handler);
- unlock_and_exit:
+unlock_and_exit:
+ acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
+
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
}
Index: linux-2.6/drivers/acpi/acpica/aclocal.h
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/aclocal.h
+++ linux-2.6/drivers/acpi/acpica/aclocal.h
@@ -412,6 +412,7 @@ struct acpi_handler_info {
acpi_event_handler address; /* Address of handler, if any */
void *context; /* Context to be passed to handler */
struct acpi_namespace_node *method_node; /* Method node for this GPE level (saved) */
+ u8 orig_flags; /* Original misc info about this GPE */
};
union acpi_gpe_dispatch_info {
Index: linux-2.6/drivers/acpi/acpica/evgpe.c
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/evgpe.c
+++ linux-2.6/drivers/acpi/acpica/evgpe.c
@@ -137,6 +137,79 @@ acpi_ev_enable_gpe(struct acpi_gpe_event
/*******************************************************************************
*
+ * FUNCTION: acpi_raw_enable_gpe
+ *
+ * PARAMETERS: gpe_event_info - GPE to enable
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Add a reference to a GPE. On the first reference, the GPE is
+ * hardware-enabled.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_raw_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
+{
+ acpi_status status = AE_OK;
+
+ if (gpe_event_info->runtime_count == ACPI_UINT8_MAX) {
+ return_ACPI_STATUS(AE_LIMIT);
+ }
+
+ gpe_event_info->runtime_count++;
+ if (gpe_event_info->runtime_count == 1) {
+ status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
+ if (ACPI_SUCCESS(status)) {
+ status = acpi_ev_enable_gpe(gpe_event_info);
+ }
+
+ if (ACPI_FAILURE(status)) {
+ gpe_event_info->runtime_count--;
+ }
+ }
+
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_raw_disable_gpe
+ *
+ * PARAMETERS: gpe_event_info - GPE to disable
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Remove a reference to a GPE. When the last reference is
+ * removed, the GPE is hardware-disabled.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_raw_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
+{
+ acpi_status status = AE_OK;
+
+ if (!gpe_event_info->runtime_count) {
+ return_ACPI_STATUS(AE_LIMIT);
+ }
+
+ gpe_event_info->runtime_count--;
+ if (!gpe_event_info->runtime_count) {
+ status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
+ if (ACPI_SUCCESS(status)) {
+ status = acpi_hw_low_set_gpe(gpe_event_info,
+ ACPI_GPE_DISABLE);
+ }
+
+ if (ACPI_FAILURE(status)) {
+ gpe_event_info->runtime_count++;
+ }
+ }
+
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
* FUNCTION: acpi_ev_low_get_gpe_info
*
* PARAMETERS: gpe_number - Raw GPE number
Index: linux-2.6/drivers/acpi/acpica/acevents.h
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/acevents.h
+++ linux-2.6/drivers/acpi/acpica/acevents.h
@@ -82,6 +82,10 @@ acpi_ev_update_gpe_enable_mask(struct ac
acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info);
+acpi_status acpi_raw_enable_gpe(struct acpi_gpe_event_info *gpe_event_info);
+
+acpi_status acpi_raw_disable_gpe(struct acpi_gpe_event_info *gpe_event_info);
+
struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
u32 gpe_number);
Index: linux-2.6/drivers/acpi/acpica/evxfevnt.c
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/evxfevnt.c
+++ linux-2.6/drivers/acpi/acpica/evxfevnt.c
@@ -294,7 +294,7 @@ ACPI_EXPORT_SYMBOL(acpi_gpe_wakeup)
******************************************************************************/
acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number)
{
- acpi_status status = AE_OK;
+ acpi_status status = AE_BAD_PARAMETER;
struct acpi_gpe_event_info *gpe_event_info;
acpi_cpu_flags flags;
@@ -305,28 +305,10 @@ acpi_status acpi_enable_gpe(acpi_handle
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
- if (!gpe_event_info) {
- status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
+ if (gpe_event_info) {
+ status = acpi_raw_enable_gpe(gpe_event_info);
}
- if (gpe_event_info->runtime_count == ACPI_UINT8_MAX) {
- status = AE_LIMIT; /* Too many references */
- goto unlock_and_exit;
- }
-
- gpe_event_info->runtime_count++;
- if (gpe_event_info->runtime_count == 1) {
- status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
- if (ACPI_SUCCESS(status)) {
- status = acpi_ev_enable_gpe(gpe_event_info);
- }
- if (ACPI_FAILURE(status)) {
- gpe_event_info->runtime_count--;
- }
- }
-
-unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
@@ -348,7 +330,7 @@ ACPI_EXPORT_SYMBOL(acpi_enable_gpe)
******************************************************************************/
acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number)
{
- acpi_status status = AE_OK;
+ acpi_status status = AE_BAD_PARAMETER;
struct acpi_gpe_event_info *gpe_event_info;
acpi_cpu_flags flags;
@@ -359,32 +341,10 @@ acpi_status acpi_disable_gpe(acpi_handle
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
- if (!gpe_event_info) {
- status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
- }
-
- /* Hardware-disable a runtime GPE on removal of the last reference */
-
- if (!gpe_event_info->runtime_count) {
- status = AE_LIMIT; /* There are no references to remove */
- goto unlock_and_exit;
+ if (gpe_event_info) {
+ status = acpi_raw_disable_gpe(gpe_event_info) ;
}
- gpe_event_info->runtime_count--;
- if (!gpe_event_info->runtime_count) {
- status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
- if (ACPI_SUCCESS(status)) {
- status =
- acpi_hw_low_set_gpe(gpe_event_info,
- ACPI_GPE_DISABLE);
- }
- if (ACPI_FAILURE(status)) {
- gpe_event_info->runtime_count++;
- }
- }
-
-unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
@@ -411,7 +371,6 @@ acpi_status acpi_gpe_can_wake(acpi_handl
acpi_status status = AE_OK;
struct acpi_gpe_event_info *gpe_event_info;
acpi_cpu_flags flags;
- u8 disable = 0;
ACPI_FUNCTION_TRACE(acpi_gpe_can_wake);
@@ -430,15 +389,12 @@ acpi_status acpi_gpe_can_wake(acpi_handl
}
gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
- disable = (gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD)
- && gpe_event_info->runtime_count;
+ if (gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD) {
+ (void)acpi_raw_disable_gpe(gpe_event_info);
+ }
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
-
- if (disable)
- status = acpi_disable_gpe(gpe_device, gpe_number);
-
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_gpe_can_wake)
next reply other threads:[~2010-08-03 21:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-03 21:55 Rafael J. Wysocki [this message]
2010-08-07 14:32 ` [Resend][PATCH] ACPI / ACPICA: Fix reference counting problems with GPE handlers Len Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201008032355.14414.rjw@sisk.pl \
--to=rjw@sisk.pl \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=ming.m.lin@intel.com \
--cc=robert.moore@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox