From: Myron Stowe <myron.stowe@hp.com>
To: lenb@kernel.org
Cc: linux-acpi@vger.kernel.org, ak@linux.intel.com, ying.huang@intel.com
Subject: [PATCH 3/7] ACPI: Add interfaces for ioremapping/iounmapping ACPI registers
Date: Thu, 21 Oct 2010 14:23:59 -0600 [thread overview]
Message-ID: <20101021202359.9220.72989.stgit@bob.kio> (raw)
In-Reply-To: <20101021201916.9220.5711.stgit@bob.kio>
Add remapping and unmapping interfaces for ACPI registers that are
backed by memory mapped I/O (MMIO). These interfaces, along with
the MMIO remapping list, enable accesses of such registers from within
interrupt context.
ACPI Generic Address Structure (GAS) reference (ACPI's fixed/generic
hardware registers use the GAS format):
ACPI Specification, Revision 4.0, Section 5.2.3.1, "Generic Address
Structure".
Signed-off-by: Myron Stowe <myron.stowe@hp.com>
---
drivers/acpi/osl.c | 38 ++++++++++++++++++++++++++++++++++++++
include/linux/acpi.h | 3 +++
2 files changed, 41 insertions(+), 0 deletions(-)
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index bd72129..fc6c5d2 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -372,6 +372,44 @@ void __init early_acpi_os_unmap_memory(void __iomem *virt, acpi_size size)
__acpi_unmap_table(virt, size);
}
+int acpi_os_map_generic_address(struct acpi_generic_address *addr)
+{
+ void __iomem *virt;
+
+ if (addr->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY)
+ return 0;
+
+ if (!addr->address || !addr->bit_width)
+ return -EINVAL;
+
+ virt = acpi_os_map_memory(addr->address, addr->bit_width / 8);
+ if (!virt)
+ return -EIO;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(acpi_os_map_generic_address);
+
+void acpi_os_unmap_generic_address(struct acpi_generic_address *addr)
+{
+ void __iomem *virt;
+ unsigned long flags;
+ acpi_size size = addr->bit_width / 8;
+
+ if (addr->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY)
+ return;
+
+ if (!addr->address || !addr->bit_width)
+ return;
+
+ spin_lock_irqsave(&acpi_ioremap_lock, flags);
+ virt = acpi_map_vaddr_lookup(addr->address, size);
+ spin_unlock_irqrestore(&acpi_ioremap_lock, flags);
+
+ acpi_os_unmap_memory(virt, size);
+}
+EXPORT_SYMBOL_GPL(acpi_os_unmap_generic_address);
+
#ifdef ACPI_FUTURE_USAGE
acpi_status
acpi_os_get_physical_address(void *virt, acpi_physical_address * phys)
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index c227757..7774e6d 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -308,6 +308,9 @@ extern acpi_status acpi_pci_osc_control_set(acpi_handle handle,
u32 *mask, u32 req);
extern void acpi_early_init(void);
+int acpi_os_map_generic_address(struct acpi_generic_address *addr);
+void acpi_os_unmap_generic_address(struct acpi_generic_address *addr);
+
#else /* !CONFIG_ACPI */
#define acpi_disabled 1
next prev parent reply other threads:[~2010-10-21 20:24 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-21 20:23 [PATCH 0/7] ACPI: Memory Mapped I/O (MMIO) pre-mapping Myron Stowe
2010-10-21 20:23 ` [PATCH 1/7] ACPI: Fix ioremap size for MMIO reads and writes Myron Stowe
2010-10-21 20:23 ` [PATCH 2/7] ACPI: Maintain a list of ACPI memory mapped I/O remappings Myron Stowe
2010-10-21 20:23 ` Myron Stowe [this message]
2010-10-21 20:24 ` [PATCH 4/7] ACPI: Pre-map 'system event' related register blocks Myron Stowe
2010-10-21 20:24 ` [PATCH 5/7] ACPI: Convert simple locking to RCU based locking Myron Stowe
2010-10-21 20:24 ` [PATCH 6/7] ACPI: Page based coalescing of I/O remappings optimization Myron Stowe
2010-10-22 1:03 ` Huang Ying
2010-10-22 3:23 ` Myron Stowe
2010-10-22 5:17 ` Huang Ying
2010-10-22 16:27 ` Myron Stowe
2010-10-25 1:22 ` Huang Ying
2010-10-21 20:24 ` [PATCH 7/7] ACPI: Re-factor and remove ./drivers/acpi/atomicio.[ch] Myron Stowe
2010-10-22 2:43 ` [PATCH 0/7] ACPI: Memory Mapped I/O (MMIO) pre-mapping Shaohua Li
2010-10-22 2:57 ` Huang Ying
2010-10-22 3:16 ` Shaohua Li
2010-10-22 3:24 ` Huang Ying
2010-10-22 17:10 ` Bjorn Helgaas
2010-10-25 8:34 ` Andi Kleen
2010-10-25 8:43 ` Huang Ying
2010-10-25 9:29 ` Andi Kleen
2010-10-25 3:38 ` Len Brown
2010-10-25 15:34 ` Myron Stowe
2010-10-25 18:34 ` Andi Kleen
2010-10-28 1:53 ` Len Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101021202359.9220.72989.stgit@bob.kio \
--to=myron.stowe@hp.com \
--cc=ak@linux.intel.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=ying.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox