[PATCH 0/4] ACPI / PM: Use standard device wakeup facilities for ACPI wakeup devices

[PATCH 0/4] ACPI / PM: Use standard device wakeup facilities for ACPI wakeup devices

[Rafael J. Wysocki]

Hi,

This series of patches causes standard device wakeup facilities to be used
with ACPI wakeup devices, like buttons.

[1/4] - Modify /proc/acpi/wakeup not to enable multiple devices at a time to
        wake up the system from sleep states, even if they share a GPE.

[2/4] - Use standard device wakeup flags for handling ACPI wakeup devices.

[3/4] - Remove special ACPI wakeup flags.

[4/4] - Report wakeup events for ACPI buttons and lids.

The patches have been tested with Toshiba Portege R500.

Thanks,
Rafael

[PATCH 1/4] ACPI / PM: Do not enable multiple devices to wake up simultaneously

[Rafael J. Wysocki]

From: Rafael J. Wysocki <rjw@sisk.pl>

If a device is enabled to wake up the system from sleep states via
/proc/acpi/wakeup and there are other devices associated with the
same wakeup GPE, all of these devices are automatically enabled to
wake up the system.  This isn't correct, because the fact that the
GPE is shared need not imply that wakeup power has to be enabled for
all the devices at the same time (i.e. it is possible that one device
will have its wakeup power enabled and it will wake up the system
from sleep states if the shared wakeup GPE is enabled, while another
device having its wakeup power disabled will not wake up the system
even though the GPE is enabled).

Rework acpi_system_write_wakeup_device() so that it only enables
wakeup for one device at a time.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 drivers/acpi/proc.c |   26 +-------------------------
 1 file changed, 1 insertion(+), 25 deletions(-)

Index: linux-2.6/drivers/acpi/proc.c
===================================================================
--- linux-2.6.orig/drivers/acpi/proc.c
+++ linux-2.6/drivers/acpi/proc.c
@@ -341,7 +341,6 @@ acpi_system_write_wakeup_device(struct f
 	char strbuf[5];
 	char str[5] = "";
 	unsigned int len = count;
-	struct acpi_device *found_dev = NULL;
 
 	if (len > 4)
 		len = 4;
@@ -363,33 +362,10 @@ acpi_system_write_wakeup_device(struct f
 		if (!strncmp(dev->pnp.bus_id, str, 4)) {
 			dev->wakeup.state.enabled =
 			    dev->wakeup.state.enabled ? 0 : 1;
-			found_dev = dev;
+			physical_device_enable_wakeup(dev);
 			break;
 		}
 	}
-	if (found_dev) {
-		physical_device_enable_wakeup(found_dev);
-		list_for_each_safe(node, next, &acpi_wakeup_device_list) {
-			struct acpi_device *dev = container_of(node,
-							       struct
-							       acpi_device,
-							       wakeup_list);
-
-			if ((dev != found_dev) &&
-			    (dev->wakeup.gpe_number ==
-			     found_dev->wakeup.gpe_number)
-			    && (dev->wakeup.gpe_device ==
-				found_dev->wakeup.gpe_device)) {
-				printk(KERN_WARNING
-				       "ACPI: '%s' and '%s' have the same GPE, "
-				       "can't disable/enable one separately\n",
-				       dev->pnp.bus_id, found_dev->pnp.bus_id);
-				dev->wakeup.state.enabled =
-				    found_dev->wakeup.state.enabled;
-				physical_device_enable_wakeup(dev);
-			}
-		}
-	}
 	mutex_unlock(&acpi_device_lock);
 	return count;
 }

[PATCH 2/4] ACPI / PM: Use device wakeup flags for handling ACPI wakeup devices

[Rafael J. Wysocki]

From: Rafael J. Wysocki <rjw@sisk.pl>

There are ACPI devices (buttons and the laptop lid) that can wake up
the system from sleep states and have no "physical" companion
devices.  The ACPI subsystem uses two flags, wakeup.state.enabled and
wakeup.flags.always_enabled, for handling those devices, but they
are not accessible through the standard device wakeup infrastructure.
User space can only control them via the /proc/acpi/wakeup interface
that is not really convenient (e.g. the way in which devices are
enabled to wake up the system is not portable between different
systems, because it requires one to know the devices' "names" used in
the system's ACPI tables).

To address this problem, use standard device wakeup flags instead of
the special ACPI flags for handling those devices.  In particular,
use device_set_wakeup_capable() to mark the ACPI wakeup devices
during initialization and use device_set_wakeup_enable() to allow
or disallow them to wake up the system from sleep states.  Rework
the /proc/acpi/wakeup interface to take these changes into account.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 drivers/acpi/button.c |    4 ++--
 drivers/acpi/proc.c   |   19 +++++++++++++------
 drivers/acpi/scan.c   |    2 +-
 drivers/acpi/wakeup.c |   18 ++++++++++--------
 4 files changed, 26 insertions(+), 17 deletions(-)

Index: linux-2.6/drivers/acpi/wakeup.c
===================================================================
--- linux-2.6.orig/drivers/acpi/wakeup.c
+++ linux-2.6/drivers/acpi/wakeup.c
@@ -37,11 +37,12 @@ void acpi_enable_wakeup_devices(u8 sleep
 			container_of(node, struct acpi_device, wakeup_list);
 
 		if (!dev->wakeup.flags.valid
-		    || !(dev->wakeup.state.enabled || dev->wakeup.prepare_count)
-		    || sleep_state > (u32) dev->wakeup.sleep_state)
+		    || sleep_state > (u32) dev->wakeup.sleep_state
+		    || !(device_may_wakeup(&dev->dev)
+		        || dev->wakeup.prepare_count))
 			continue;
 
-		if (dev->wakeup.state.enabled)
+		if (device_may_wakeup(&dev->dev))
 			acpi_enable_wakeup_device_power(dev, sleep_state);
 
 		/* The wake-up power should have been enabled already. */
@@ -63,14 +64,15 @@ void acpi_disable_wakeup_devices(u8 slee
 			container_of(node, struct acpi_device, wakeup_list);
 
 		if (!dev->wakeup.flags.valid
-		    || !(dev->wakeup.state.enabled || dev->wakeup.prepare_count)
-		    || (sleep_state > (u32) dev->wakeup.sleep_state))
+		    || sleep_state > (u32) dev->wakeup.sleep_state
+		    || !(device_may_wakeup(&dev->dev)
+		        || dev->wakeup.prepare_count))
 			continue;
 
 		acpi_gpe_wakeup(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
 				ACPI_GPE_DISABLE);
 
-		if (dev->wakeup.state.enabled)
+		if (device_may_wakeup(&dev->dev))
 			acpi_disable_wakeup_device_power(dev);
 	}
 }
@@ -84,8 +86,8 @@ int __init acpi_wakeup_device_init(void)
 		struct acpi_device *dev = container_of(node,
 						       struct acpi_device,
 						       wakeup_list);
-		if (dev->wakeup.flags.always_enabled)
-			dev->wakeup.state.enabled = 1;
+		if (device_can_wakeup(&dev->dev))
+			device_set_wakeup_enable(&dev->dev, true);
 	}
 	mutex_unlock(&acpi_device_lock);
 	return 0;
Index: linux-2.6/drivers/acpi/button.c
===================================================================
--- linux-2.6.orig/drivers/acpi/button.c
+++ linux-2.6/drivers/acpi/button.c
@@ -426,7 +426,7 @@ static int acpi_button_add(struct acpi_d
 		acpi_enable_gpe(device->wakeup.gpe_device,
 				device->wakeup.gpe_number);
 		device->wakeup.run_wake_count++;
-		device->wakeup.state.enabled = 1;
+		device_set_wakeup_enable(&device->dev, true);
 	}
 
 	printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
@@ -449,7 +449,7 @@ static int acpi_button_remove(struct acp
 		acpi_disable_gpe(device->wakeup.gpe_device,
 				device->wakeup.gpe_number);
 		device->wakeup.run_wake_count--;
-		device->wakeup.state.enabled = 0;
+		device_set_wakeup_enable(&device->dev, false);
 	}
 
 	acpi_button_remove_fs(device);
Index: linux-2.6/drivers/acpi/scan.c
===================================================================
--- linux-2.6.orig/drivers/acpi/scan.c
+++ linux-2.6/drivers/acpi/scan.c
@@ -803,7 +803,7 @@ static void acpi_bus_set_run_wake_flags(
 	/* Power button, Lid switch always enable wakeup */
 	if (!acpi_match_device_ids(device, button_device_ids)) {
 		device->wakeup.flags.run_wake = 1;
-		device->wakeup.flags.always_enabled = 1;
+		device_set_wakeup_capable(&device->dev, true);
 		return;
 	}
 
Index: linux-2.6/drivers/acpi/proc.c
===================================================================
--- linux-2.6.orig/drivers/acpi/proc.c
+++ linux-2.6/drivers/acpi/proc.c
@@ -311,7 +311,9 @@ acpi_system_wakeup_device_seq_show(struc
 			   dev->pnp.bus_id,
 			   (u32) dev->wakeup.sleep_state,
 			   dev->wakeup.flags.run_wake ? '*' : ' ',
-			   dev->wakeup.state.enabled ? "enabled" : "disabled");
+			   (device_may_wakeup(&dev->dev)
+			     || (ldev && device_may_wakeup(ldev))) ?
+			       "enabled" : "disabled");
 		if (ldev)
 			seq_printf(seq, "%s:%s",
 				   ldev->bus ? ldev->bus->name : "no-bus",
@@ -328,8 +330,10 @@ static void physical_device_enable_wakeu
 {
 	struct device *dev = acpi_get_physical_device(adev->handle);
 
-	if (dev && device_can_wakeup(dev))
-		device_set_wakeup_enable(dev, adev->wakeup.state.enabled);
+	if (dev && device_can_wakeup(dev)) {
+		bool enable = !device_may_wakeup(dev);
+		device_set_wakeup_enable(dev, enable);
+	}
 }
 
 static ssize_t
@@ -360,9 +364,12 @@ acpi_system_write_wakeup_device(struct f
 			continue;
 
 		if (!strncmp(dev->pnp.bus_id, str, 4)) {
-			dev->wakeup.state.enabled =
-			    dev->wakeup.state.enabled ? 0 : 1;
-			physical_device_enable_wakeup(dev);
+			if (device_can_wakeup(&dev->dev)) {
+				bool enable = !device_may_wakeup(&dev->dev);
+				device_set_wakeup_enable(&dev->dev, enable);
+			} else {
+				physical_device_enable_wakeup(dev);
+			}
 			break;
 		}
 	}

[PATCH 3/4] ACPI / PM: Drop special ACPI wakeup flags

[Rafael J. Wysocki]

From: Rafael J. Wysocki <rjw@sisk.pl>

Drop special ACPI wakeup flags, wakeup.state.enabled and
wakeup.flags.always_enabled, that aren't necessary any more after
we've started to use standard device wakeup flags for handling ACPI
wakeup devices.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 drivers/acpi/glue.c     |    5 +----
 include/acpi/acpi_bus.h |    6 ------
 2 files changed, 1 insertion(+), 10 deletions(-)

Index: linux-2.6/drivers/acpi/glue.c
===================================================================
--- linux-2.6.orig/drivers/acpi/glue.c
+++ linux-2.6/drivers/acpi/glue.c
@@ -167,11 +167,8 @@ static int acpi_bind_one(struct device *
 				"firmware_node");
 		ret = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj,
 				"physical_node");
-		if (acpi_dev->wakeup.flags.valid) {
+		if (acpi_dev->wakeup.flags.valid)
 			device_set_wakeup_capable(dev, true);
-			device_set_wakeup_enable(dev,
-						acpi_dev->wakeup.state.enabled);
-		}
 	}
 
 	return 0;
Index: linux-2.6/include/acpi/acpi_bus.h
===================================================================
--- linux-2.6.orig/include/acpi/acpi_bus.h
+++ linux-2.6/include/acpi/acpi_bus.h
@@ -241,20 +241,14 @@ struct acpi_device_perf {
 struct acpi_device_wakeup_flags {
 	u8 valid:1;		/* Can successfully enable wakeup? */
 	u8 run_wake:1;		/* Run-Wake GPE devices */
-	u8 always_enabled:1;	/* Run-wake devices that are always enabled */
 	u8 notifier_present:1;  /* Wake-up notify handler has been installed */
 };
 
-struct acpi_device_wakeup_state {
-	u8 enabled:1;
-};
-
 struct acpi_device_wakeup {
 	acpi_handle gpe_device;
 	u64 gpe_number;
 	u64 sleep_state;
 	struct acpi_handle_list resources;
-	struct acpi_device_wakeup_state state;
 	struct acpi_device_wakeup_flags flags;
 	int prepare_count;
 	int run_wake_count;

[PATCH 4/4] ACPI / PM: Report wakeup events from buttons

[Rafael J. Wysocki]

From: Rafael J. Wysocki <rjw@sisk.pl>

Since ACPI buttons and lids can be configured to wake up the system
from sleep states, report wakeup events from these devices.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 drivers/acpi/button.c |    5 +++++
 1 file changed, 5 insertions(+)

Index: linux-2.6/drivers/acpi/button.c
===================================================================
--- linux-2.6.orig/drivers/acpi/button.c
+++ linux-2.6/drivers/acpi/button.c
@@ -279,6 +279,9 @@ static int acpi_lid_send_state(struct ac
 	input_report_switch(button->input, SW_LID, !state);
 	input_sync(button->input);
 
+	if (state)
+		pm_wakeup_event(&device->dev, 0);
+
 	ret = blocking_notifier_call_chain(&acpi_lid_notifier, state, device);
 	if (ret == NOTIFY_DONE)
 		ret = blocking_notifier_call_chain(&acpi_lid_notifier, state,
@@ -314,6 +317,8 @@ static void acpi_button_notify(struct ac
 			input_sync(input);
 			input_report_key(input, keycode, 0);
 			input_sync(input);
+
+			pm_wakeup_event(&device->dev, 0);
 		}
 
 		acpi_bus_generate_proc_event(device, event, ++button->pushed);