* Re: [BUG] Fans keep running, first found since v2.6.38-rc7 [not found] ` <4d780a2f.231a8f0a.3b01.ffffa228@mx.google.com> @ 2011-03-10 0:06 ` Rafael J. Wysocki 2011-03-10 11:59 ` Wang Lei 2011-03-11 0:04 ` Wang Lei 0 siblings, 2 replies; 9+ messages in thread From: Rafael J. Wysocki @ 2011-03-10 0:06 UTC (permalink / raw) To: Wang Lei; +Cc: linux-kernel, ACPI Devel Mailing List On Thursday, March 10, 2011, Wang Lei wrote: > "Rafael J. Wysocki" <rjw@sisk.pl> writes: > > > On Wednesday, March 09, 2011, Wang Lei wrote: > >> "Rafael J. Wysocki" <rjw@sisk.pl> writes: > >> > >> > > >> > There was only one commit in that area since 2.6.38-rc6, but it shouldn't > >> > affect the functionality this way. > >> > > >> > Is yout thermal management controlled by ACPI? > >> > > >> > Rafael > >> > >> Thanks for your reply! > >> > >> How could I know that? > > > > What does "ls -l /sys/class/thermal/cooling_device0/device" say? > > > > Rafael > > [~]$ ls -l /sys/class/thermal/cooling_device0/device > lrwxrwxrwx 1 root root 0 Mar 10 07:13 /sys/class/thermal/cooling_device0/device -> ../../../LNXSYSTM:00/device:47/PNP0C0B:00 > [~]$ That's ACPI. I don't know, however, which change might cause the problem to happen. Can you bisect the commits between 2.6.38-rc6 and -rc7 to find the one that introduced the issue? Rafael ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [BUG] Fans keep running, first found since v2.6.38-rc7 2011-03-10 0:06 ` [BUG] Fans keep running, first found since v2.6.38-rc7 Rafael J. Wysocki @ 2011-03-10 11:59 ` Wang Lei 2011-03-11 0:04 ` Wang Lei 1 sibling, 0 replies; 9+ messages in thread From: Wang Lei @ 2011-03-10 11:59 UTC (permalink / raw) To: Rafael J. Wysocki; +Cc: linux-kernel, ACPI Devel Mailing List "Rafael J. Wysocki" <rjw@sisk.pl> writes: > On Thursday, March 10, 2011, Wang Lei wrote: >> "Rafael J. Wysocki" <rjw@sisk.pl> writes: >> >> > On Wednesday, March 09, 2011, Wang Lei wrote: >> >> "Rafael J. Wysocki" <rjw@sisk.pl> writes: >> >> >> >> > >> >> > There was only one commit in that area since 2.6.38-rc6, but it shouldn't >> >> > affect the functionality this way. >> >> > >> >> > Is yout thermal management controlled by ACPI? >> >> > >> >> > Rafael >> >> >> >> Thanks for your reply! >> >> >> >> How could I know that? >> > >> > What does "ls -l /sys/class/thermal/cooling_device0/device" say? >> > >> > Rafael >> >> [~]$ ls -l /sys/class/thermal/cooling_device0/device >> lrwxrwxrwx 1 root root 0 Mar 10 07:13 /sys/class/thermal/cooling_device0/device -> ../../../LNXSYSTM:00/device:47/PNP0C0B:00 >> [~]$ > > That's ACPI. > > I don't know, however, which change might cause the problem to happen. > > Can you bisect the commits between 2.6.38-rc6 and -rc7 to find the one that > introduced the issue? > > Rafael OK, I'll try. -- Regards, Lei ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [BUG] Fans keep running, first found since v2.6.38-rc7 2011-03-10 0:06 ` [BUG] Fans keep running, first found since v2.6.38-rc7 Rafael J. Wysocki 2011-03-10 11:59 ` Wang Lei @ 2011-03-11 0:04 ` Wang Lei 2011-03-11 7:41 ` Andreas Herrmann 1 sibling, 1 reply; 9+ messages in thread From: Wang Lei @ 2011-03-11 0:04 UTC (permalink / raw) To: Rafael J. Wysocki; +Cc: linux-kernel, ACPI Devel Mailing List, Andreas Herrmann "Rafael J. Wysocki" <rjw@sisk.pl> writes: > On Thursday, March 10, 2011, Wang Lei wrote: >> "Rafael J. Wysocki" <rjw@sisk.pl> writes: >> >> > On Wednesday, March 09, 2011, Wang Lei wrote: >> >> "Rafael J. Wysocki" <rjw@sisk.pl> writes: >> >> >> >> > >> >> > There was only one commit in that area since 2.6.38-rc6, but it shouldn't >> >> > affect the functionality this way. >> >> > >> >> > Is yout thermal management controlled by ACPI? >> >> > >> >> > Rafael >> >> >> >> Thanks for your reply! >> >> >> >> How could I know that? >> > >> > What does "ls -l /sys/class/thermal/cooling_device0/device" say? >> > >> > Rafael >> >> [~]$ ls -l /sys/class/thermal/cooling_device0/device >> lrwxrwxrwx 1 root root 0 Mar 10 07:13 /sys/class/thermal/cooling_device0/device -> ../../../LNXSYSTM:00/device:47/PNP0C0B:00 >> [~]$ > > That's ACPI. > > I don't know, however, which change might cause the problem to happen. > > Can you bisect the commits between 2.6.38-rc6 and -rc7 to find the one that > introduced the issue? > > Rafael Thanks, Rafael. Bisect stopped at commit 7f74f8f28a2bd9db9404f7d364e2097a0c42cc12 -------------------- [~/repository/kernel]$ git bisect good 7f74f8f28a2bd9db9404f7d364e2097a0c42cc12 is the first bad commit commit 7f74f8f28a2bd9db9404f7d364e2097a0c42cc12 Author: Andreas Herrmann <andreas.herrmann3@amd.com> Date: Thu Feb 24 15:53:46 2011 +0100 x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systems On some SB800 systems polarity for IOAPIC pin2 is wrongly specified as low active by BIOS. This caused system hangs after resume from S3 when HPET was used in one-shot mode on such systems because a timer interrupt was missed (HPET signal is high active). For more details see: http://marc.info/?l=linux-kernel&m=129623757413868 Tested-by: Manoj Iyer <manoj.iyer@canonical.com> Tested-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: stable@kernel.org # 37.x, 32.x LKML-Reference: <20110224145346.GD3658@alberich.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> :040000 040000 918adb3e08ef8cd258016dc46afab842e1be65fc 77d76d6f2451b16f963ce1ffe183aacfed9d994d M arch [~/repository/kernel]$ -------------------- So, I Cc to Andreas Herrmann, hope you will notice and help fix this. Thanks, all you hackers! -- Regards, Lei ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [BUG] Fans keep running, first found since v2.6.38-rc7 2011-03-11 0:04 ` Wang Lei @ 2011-03-11 7:41 ` Andreas Herrmann 2011-03-11 10:47 ` Wang Lei 0 siblings, 1 reply; 9+ messages in thread From: Andreas Herrmann @ 2011-03-11 7:41 UTC (permalink / raw) To: Wang Lei Cc: Rafael J. Wysocki, linux-kernel@vger.kernel.org, ACPI Devel Mailing List Hi Lei, can you please provide information, which system you are using. dmesg (please use apic=debug kernel parameter), output of lspci -nnxxxx (as root), This reminds me on some HP laptop issues, see https://bugzilla.kernel.org/show_bug.cgi?id=11715 https://bugzilla.kernel.org/show_bug.cgi?id=11516 The BIOSes on HP laptops somehow checked IO-APIC configuration and set trip_points differently (for unknown reason). But I need above debug info to sort this out. Thanks, Andreas On Thu, Mar 10, 2011 at 07:04:51PM -0500, Wang Lei wrote: > "Rafael J. Wysocki" <rjw@sisk.pl> writes: > > > On Thursday, March 10, 2011, Wang Lei wrote: > >> "Rafael J. Wysocki" <rjw@sisk.pl> writes: > >> > >> > On Wednesday, March 09, 2011, Wang Lei wrote: > >> >> "Rafael J. Wysocki" <rjw@sisk.pl> writes: > >> >> > >> >> > > >> >> > There was only one commit in that area since 2.6.38-rc6, but it shouldn't > >> >> > affect the functionality this way. > >> >> > > >> >> > Is yout thermal management controlled by ACPI? > >> >> > > >> >> > Rafael > >> >> > >> >> Thanks for your reply! > >> >> > >> >> How could I know that? > >> > > >> > What does "ls -l /sys/class/thermal/cooling_device0/device" say? > >> > > >> > Rafael > >> > >> [~]$ ls -l /sys/class/thermal/cooling_device0/device > >> lrwxrwxrwx 1 root root 0 Mar 10 07:13 /sys/class/thermal/cooling_device0/device -> ../../../LNXSYSTM:00/device:47/PNP0C0B:00 > >> [~]$ > > > > That's ACPI. > > > > I don't know, however, which change might cause the problem to happen. > > > > Can you bisect the commits between 2.6.38-rc6 and -rc7 to find the one that > > introduced the issue? > > > > Rafael > > Thanks, Rafael. > Bisect stopped at commit 7f74f8f28a2bd9db9404f7d364e2097a0c42cc12 > > -------------------- > [~/repository/kernel]$ git bisect good > 7f74f8f28a2bd9db9404f7d364e2097a0c42cc12 is the first bad commit > commit 7f74f8f28a2bd9db9404f7d364e2097a0c42cc12 > Author: Andreas Herrmann <andreas.herrmann3@amd.com> > Date: Thu Feb 24 15:53:46 2011 +0100 > > x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systems > > On some SB800 systems polarity for IOAPIC pin2 is wrongly > specified as low active by BIOS. This caused system hangs after > resume from S3 when HPET was used in one-shot mode on such > systems because a timer interrupt was missed (HPET signal is > high active). > > For more details see: > > http://marc.info/?l=linux-kernel&m=129623757413868 > > Tested-by: Manoj Iyer <manoj.iyer@canonical.com> > Tested-by: Andre Przywara <andre.przywara@amd.com> > Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> > Cc: Borislav Petkov <borislav.petkov@amd.com> > Cc: stable@kernel.org # 37.x, 32.x > LKML-Reference: <20110224145346.GD3658@alberich.amd.com> > Signed-off-by: Ingo Molnar <mingo@elte.hu> > > :040000 040000 918adb3e08ef8cd258016dc46afab842e1be65fc 77d76d6f2451b16f963ce1ffe183aacfed9d994d M arch > [~/repository/kernel]$ > -------------------- > > So, I Cc to Andreas Herrmann, hope you will notice and help fix this. > > Thanks, all you hackers! > > -- > Regards, > Lei > -- Operating | Advanced Micro Devices GmbH System | Einsteinring 24, 85609 Dornach b. München, Germany Research | Geschäftsführer: Alberto Bozzo, Andrew Bowd Center | Sitz: Dornach, Gemeinde Aschheim, Landkreis München (OSRC) | Registergericht München, HRB Nr. 43632 -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [BUG] Fans keep running, first found since v2.6.38-rc7 2011-03-11 7:41 ` Andreas Herrmann @ 2011-03-11 10:47 ` Wang Lei 2011-03-11 11:38 ` Andreas Herrmann 0 siblings, 1 reply; 9+ messages in thread From: Wang Lei @ 2011-03-11 10:47 UTC (permalink / raw) To: Andreas Herrmann Cc: Rafael J. Wysocki, linux-kernel@vger.kernel.org, ACPI Devel Mailing List [-- Attachment #1: Type: text/plain, Size: 336 bytes --] Hi Andreas, Thanks for your reply. Andreas Herrmann <andreas.herrmann3@amd.com> writes: > Hi Lei, > > can you please provide information, which system you are using. dmesg > (please use apic=debug kernel parameter), output of lspci -nnxxxx (as > root), > I'm using debian sid with customized kernel. dmesg and lspci are attached. [-- Attachment #2: dmesg --] [-- Type: text/plain, Size: 33779 bytes --] Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.38-rc6+ (root@localhost) (gcc version 4.4.5 (Debian 4.4.5-12) ) #1 SMP Fri Feb 25 20:01:40 CST 2011 Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-rc6+ root=/dev/sda1 ro apic=debug BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000097fb0000 (usable) BIOS-e820: 0000000097fb0000 - 0000000097fc8000 (reserved) BIOS-e820: 0000000097fc8000 - 0000000097fe7fb8 (ACPI NVS) BIOS-e820: 0000000097fe7fb8 - 00000000a0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI 2.4 present. DMI: Hewlett-Packard HP Compaq 6515b (GL087PA#AB2)/30C2, BIOS 68YTT Ver. F.05 04/26/2007 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x97fb0 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C0FFF write-protect C1000-C3FFF write-back C4000-C4FFF write-protect C5000-C7FFF write-back C8000-C8FFF write-protect C9000-CBFFF write-back CC000-CCFFF write-protect CD000-CFFFF write-back D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFF0000000 write-back 2 base 0090000000 mask FFF8000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-0000000097fb0000 0000000000 - 0097e00000 page 2M 0097e00000 - 0097fb0000 page 4k kernel direct mapping tables up to 97fb0000 @ 1fffb000-20000000 ACPI: RSDP 00000000000fe0b0 00024 (v02 HP ) ACPI: XSDT 0000000097fc81bc 00064 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 0000000097fc8084 000F4 (v04 HP 0944 00000003 HP 00000001) ACPI Error: 32/64X address mismatch in Pm2ControlBlock: 0x00008800/0x0000000000008100, using 32 (20110112/tbfadt-427) ACPI: DSDT 0000000097fc84a4 11437 (v01 HP SB400 00010000 MSFT 03000001) ACPI: FACS 0000000097fe7d80 00040 ACPI: SLIC 0000000097fc8220 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: EPTH 0000000097fc8398 00038 (v01 HP 0944 00000001 HP 00000001) ACPI: APIC 0000000097fc83d0 00062 (v01 HP 0944 00000001 HP 00000001) ACPI: MCFG 0000000097fc8434 0003C (v01 HP 0944 00000001 HP 00000001) ACPI: TCPA 0000000097fc8470 00032 (v02 HP 0944 00000001 HP 00000001) ACPI: SSDT 0000000097fd98db 00059 (v01 HP HPQNLP 00000001 MSFT 03000001) ACPI: SSDT 0000000097fd9934 00182 (v01 HP PSSTBLID 00000001 HP 00000001) ACPI: Local APIC address 0xfee00000 mapped APIC to ffffffffff5fc000 ( fee00000) [ffffea0000000000-ffffea00021fffff] PMD -> [ffff880095000000-ffff8800971fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x00097fb0 On node 0 totalpages: 622399 DMA zone: 56 pages used for memmap DMA zone: 2 pages reserved DMA zone: 3925 pages, LIFO batch:0 DMA32 zone: 8455 pages used for memmap DMA32 zone: 609961 pages, LIFO batch:31 SB600 revision 0x13 Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 mapped APIC to ffffffffff5fc000 ( fee00000) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 00 Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 0, trig 0, bus 00, IRQ 02, APIC ID 2, APIC INT 02 Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05 Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 ACPI: IRQ9 used by override. Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped IOAPIC to ffffffffff5fb000 (fec00000) nr_irqs_gsi: 40 Allocating PCI resources starting at a0000000 (gap: a0000000:40000000) setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff880097c00000 s72704 r8192 d21504 u1048576 pcpu-alloc: s72704 r8192 d21504 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 613886 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-rc6+ root=/dev/sda1 ro apic=debug PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 412e000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 2443420k/2490048k available (2776k kernel code, 452k absent, 46176k reserved, 1224k data, 368k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. NR_IRQS:4352 nr_irqs:512 16 Extended CMOS year: 2000 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled allocated 24903680 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Fast TSC calibration using PIT Detected 1593.679 MHz processor. Marking TSC unstable due to TSCs unsynchronized Calibrating delay loop (skipped), value calculated using timer frequency.. 3187.35 BogoMIPS (lpj=1593679) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 Initializing cgroup subsys ns ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys blkio tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine ACPI: Core revision 20110112 Getting VERSION: 80050010 Getting VERSION: 80050010 Getting ID: 0 Getting ID: ff000000 Getting LVT0: 700 Getting LVT1: 400 Setting APIC routing to flat enabled ExtINT on CPU#0 ENABLING IO-APIC IRQs init IO_APIC IRQs IOAPIC[0]: Set routing entry (2-0 -> 0x30 -> IRQ 0 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:1) IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02 Using local APIC timer interrupts. calibrating APIC timer ... ... lapic delta = 1246686 ... PM-Timer delta = 357900 ... PM-Timer result ok ..... delta 1246686 ..... mult: 53552896 ..... calibration result: 199469 ..... CPU clock speed is 1595.0760 MHz. ..... host bus clock speed is 199.0469 MHz. Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f MCE: In-kernel MCE decoding enabled. Booting Node 0, Processors #1 Ok. masked ExtINT on CPU#1 System has AMD C1E enabled Switch to broadcast mode on CPU1 Brought up 2 CPUs Total of 2 processors activated (6378.71 BogoMIPS). devtmpfs: initialized Switch to broadcast mode on CPU0 NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 00000000a0000000 aka 2560M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [c8000000, dfffffff] node 0 link 0: mmio [c0000000, c7ffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [a0000000, bfffffff] bus: [00, ff] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xa0000000-0xfcffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [C171] (off) ACPI: Power Resource [C24C] (on) ACPI: Power Resource [C395] (off) ACPI: Power Resource [C396] (off) ACPI: Power Resource [C397] (off) ACPI: Power Resource [C398] (off) ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [C08B] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xa0000000-0xfedfffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffffffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) pci 0000:00:00.0: [1002:7910] type 0 class 0x000600 pci 0000:00:01.0: [1002:7912] type 1 class 0x000604 pci 0000:00:05.0: [1002:7915] type 1 class 0x000604 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:12.0: [1002:4380] type 0 class 0x000101 pci 0000:00:12.0: reg 10: [io 0x9000-0x9007] pci 0000:00:12.0: reg 14: [io 0x9008-0x900b] pci 0000:00:12.0: reg 18: [io 0x9010-0x9017] pci 0000:00:12.0: reg 1c: [io 0x5018-0x501b] pci 0000:00:12.0: reg 20: [io 0x5020-0x502f] pci 0000:00:12.0: reg 24: [mem 0xcc309000-0xcc3093ff] pci 0000:00:12.0: set SATA to AHCI mode pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03 pci 0000:00:13.0: reg 10: [mem 0xcc301000-0xcc301fff] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03 pci 0000:00:13.1: reg 10: [mem 0xcc302000-0xcc302fff] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03 pci 0000:00:13.2: reg 10: [mem 0xcc303000-0xcc303fff] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03 pci 0000:00:13.3: reg 10: [mem 0xcc304000-0xcc304fff] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03 pci 0000:00:13.4: reg 10: [mem 0xcc305000-0xcc305fff] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03 pci 0000:00:13.5: reg 10: [mem 0xcc306000-0xcc3060ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.5: PME# disabled pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 pci 0000:00:14.0: reg 10: [io 0x8200-0x820f] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101 pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0x5040-0x504f] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 pci 0000:00:14.2: reg 10: [mem 0xcc308000-0xcc30bfff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:00:14.3: [1002:438d] type 0 class 0x000601 pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 PCI: peer root bus 00 res updated from pci conf pci 0000:01:05.0: [1002:791f] type 0 class 0x000300 pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:01:05.0: reg 18: [mem 0xcc100000-0xcc10ffff 64bit] pci 0000:01:05.0: reg 20: [io 0x4000-0x40ff] pci 0000:01:05.0: reg 24: [mem 0xcc200000-0xcc2fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xcc100000-0xcc2fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xc8000000-0xcbffffff] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:02:04.0: [1180:0476] type 2 class 0x000607 pci 0000:02:04.0: reg 10: [mem 0xcc000000-0xcc000fff] pci 0000:02:04.0: supports D1 D2 pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:04.0: PME# disabled pci 0000:00:14.4: PCI bridge to [bus 02-03] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:14.4: bridge window [mem 0xcc000000-0xcc0fffff] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xa0000000-0xfcffffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C08B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C08C._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C0FC._PRT] ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled. SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:14.2: address space collision: [mem 0xcc308000-0xcc30bfff 64bit] conflicts with 0000:00:12.0 [mem 0xcc309000-0xcc3093ff] reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 0000000097fb0000 - 0000000097ffffff printing PIC contents ... PIC IMR: ffff ... PIC IRR: 0003 ... PIC ISR: 0000 ... PIC ELCR: 0e20 printing local APIC contents on CPU#0/0: ... APIC ID: 00000000 (0) ... APIC VERSION: 80050010 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 00000000 (00) ... APIC PROCPRI: 00000000 ... APIC LDR: 01000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC TMR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC IRR field: 0000000000000000000000000000000000000000000000000000000000008000 ... APIC ESR: 00000000 ... APIC ICR: 000008fd ... APIC ICR2: 02000000 ... APIC LVTT: 000300ef ... APIC LVTPC: 00000400 ... APIC LVT0: 00010700 ... APIC LVT1: 00000400 ... APIC LVTERR: 000000fe ... APIC TMICT: 00000000 ... APIC TMCCT: 00000000 ... APIC TDCR: 00000003 ... APIC EFEAT: 00010003 ... APIC ECTRL: 00000000 ... APIC EILVT0: 000000f9 number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 00000000 ....... : physical APIC id: 00 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178021 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0021 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 003 0 0 0 0 0 1 1 30 01 003 1 0 0 0 0 1 1 31 02 003 1 0 0 0 0 0 0 32 03 003 0 0 0 0 0 1 1 33 04 003 0 0 0 0 0 1 1 34 05 003 0 0 0 0 0 1 1 35 06 003 0 0 0 0 0 1 1 36 07 003 0 0 0 0 0 1 1 37 08 003 0 0 0 0 0 1 1 38 09 003 0 1 0 1 0 1 1 39 0a 003 0 0 0 0 0 1 1 3A 0b 003 0 0 0 0 0 1 1 3B 0c 003 0 0 0 0 0 1 1 3C 0d 003 0 0 0 0 0 1 1 3D 0e 003 0 0 0 0 0 1 1 3E 0f 003 0 0 0 0 0 1 1 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ2 -> 0:2 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x000e0000-0x000fffff] pnp 00:00: [mem 0x00100000-0xffffffff] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0xffffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [bus 00-ff] pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: [io 0x0000-0x0cf7 window] pnp 00:01: [io 0x0d00-0xffff window] pnp 00:01: [mem 0x000a0000-0x000bffff window] pnp 00:01: [mem 0xa0000000-0xfedfffff window] pnp 00:01: [mem 0xfee01000-0xffffffff window] pnp 00:01: [mem 0x000d0000-0x000dffff window] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:02: [io 0x00f0-0x00ff] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) pnp 00:02: [irq 13] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:03: [io 0x0000-0x000f] pnp 00:03: [io 0x0080-0x008f] pnp 00:03: [io 0x00c0-0x00df] pnp 00:03: [dma 4] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:04: [io 0x0061] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:05: [io 0x0070-0x0071] pnp 00:05: [io 0x0072-0x0073] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) pnp 00:05: [irq 8] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:06: [io 0x0060] pnp 00:06: [io 0x0064] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) pnp 00:06: [irq 1] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) pnp 00:07: [irq 12] pnp 00:07: Plug and Play ACPI device, IDs SYN0131 SYN0100 SYN0002 PNP0f13 (active) pnp 00:08: [io 0x0010-0x001f] pnp 00:08: [io 0x0022-0x0023] pnp 00:08: [io 0x002e-0x002f] pnp 00:08: [io 0x004e-0x004f] pnp 00:08: [io 0x0092] pnp 00:08: [io 0x00b0-0x00b1] pnp 00:08: [io 0x040b] pnp 00:08: [io 0x04d0-0x04d1] pnp 00:08: [io 0x04d6] pnp 00:08: [io 0x0500-0x053f] pnp 00:08: [io 0x0c00-0x0c01] pnp 00:08: [io 0x0c14] pnp 00:08: [io 0x0c50-0x0c51] pnp 00:08: [io 0x0c52] pnp 00:08: [io 0x0c6c] pnp 00:08: [io 0x0c6f] pnp 00:08: [io 0x0cd0-0x0cdf] pnp 00:08: [mem 0xffb00000-0xffbfffff] pnp 00:08: [mem 0xfff00000-0xffffffff] system 00:08: [io 0x040b] has been reserved system 00:08: [io 0x04d0-0x04d1] has been reserved system 00:08: [io 0x04d6] has been reserved system 00:08: [io 0x0500-0x053f] has been reserved system 00:08: [io 0x0c00-0x0c01] has been reserved system 00:08: [io 0x0c14] has been reserved system 00:08: [io 0x0c50-0x0c51] has been reserved system 00:08: [io 0x0c52] has been reserved system 00:08: [io 0x0c6c] has been reserved system 00:08: [io 0x0c6f] has been reserved system 00:08: [io 0x0cd0-0x0cdf] has been reserved system 00:08: [mem 0xffb00000-0xffbfffff] could not be reserved system 00:08: [mem 0xfff00000-0xffffffff] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) IOAPIC[0]: Set routing entry (2-22 -> 0x29 -> IRQ 22 Mode:0 Active:0) pnp 00:09: [irq 22] pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active) pnp 00:0a: [io 0x8000-0x802f] pnp 00:0a: [io 0x8100-0x811f] pnp 00:0a: [mem 0xe0000000-0xefffffff] pnp 00:0a: [mem 0xfec00000-0xfec000ff] pnp 00:0a: [mem 0xfed45000-0xfed8ffff] system 00:0a: [io 0x8000-0x802f] has been reserved system 00:0a: [io 0x8100-0x811f] has been reserved system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved system 00:0a: [mem 0xfec00000-0xfec000ff] could not be reserved system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [mem 0x000cd400-0x000cffff] pnp 00:0b: [mem 0x00000000-0x07ffffff] pnp 00:0b: [mem 0xfee00000-0xfee00fff] system 00:0b: [mem 0x000cd400-0x000cffff] has been reserved system 00:0b: [mem 0x00000000-0x07ffffff] could not be reserved system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered Switching to clocksource acpi_pm pci 0000:00:14.4: BAR 9: assigned [mem 0xa0000000-0xa3ffffff pref] pci 0000:00:14.2: BAR 0: assigned [mem 0xa4000000-0xa4003fff 64bit] pci 0000:00:14.2: BAR 0: set to [mem 0xa4000000-0xa4003fff 64bit] (PCI address [0xa4000000-0xa4003fff]) pci 0000:00:14.4: BAR 7: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xcc100000-0xcc2fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xc8000000-0xcbffffff] pci 0000:00:05.0: bridge window [mem pref disabled] pci 0000:02:04.0: BAR 9: assigned [mem 0xa0000000-0xa3ffffff pref] pci 0000:02:04.0: BAR 10: assigned [mem 0xa8000000-0xabffffff] pci 0000:02:04.0: BAR 7: assigned [io 0x1000-0x10ff] pci 0000:02:04.0: BAR 8: assigned [io 0x1400-0x14ff] pci 0000:02:04.0: CardBus bridge to [bus 03-06] pci 0000:02:04.0: bridge window [io 0x1000-0x10ff] pci 0000:02:04.0: bridge window [io 0x1400-0x14ff] pci 0000:02:04.0: bridge window [mem 0xa0000000-0xa3ffffff pref] pci 0000:02:04.0: bridge window [mem 0xa8000000-0xabffffff] pci 0000:00:14.4: PCI bridge to [bus 02-03] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] pci 0000:00:14.4: bridge window [mem 0xcc000000-0xcc0fffff] pci 0000:00:14.4: bridge window [mem 0xa0000000-0xa3ffffff pref] pci 0000:00:05.0: setting latency timer to 64 IOAPIC[0]: Set routing entry (2-20 -> 0x41 -> IRQ 20 Mode:1 Active:1) pci 0000:02:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci_bus 0000:00: resource 4 [io 0x0000-0xffff] pci_bus 0000:00: resource 5 [mem 0xa0000000-0xfcffffffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] pci_bus 0000:01: resource 1 [mem 0xcc100000-0xcc2fffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff] pci_bus 0000:20: resource 1 [mem 0xc8000000-0xcbffffff] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xcc000000-0xcc0fffff] pci_bus 0000:02: resource 2 [mem 0xa0000000-0xa3ffffff pref] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] pci_bus 0000:02: resource 5 [mem 0xa0000000-0xfcffffffff] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:03: resource 0 [io 0x1000-0x10ff] pci_bus 0000:03: resource 1 [io 0x1400-0x14ff] pci_bus 0000:03: resource 2 [mem 0xa0000000-0xa3ffffff pref] pci_bus 0000:03: resource 3 [mem 0xa8000000-0xabffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:01:05.0: Boot video device PCI: CLS 64 bytes, default 64 msgmni has been set to 4772 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) ACPI: AC Adapter [C1EB] (on-line) input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [C28D] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [C265] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: Fan [C399] (off) ACPI: Fan [C39A] (off) ACPI: Fan [C39B] (off) ACPI: Fan [C39C] (off) ACPI: acpi_idle registered with cpuidle ACPI: processor limited to max C-state 1 thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ1] (46 C) ACPI: Battery Slot [C1ED] (battery absent) ACPI: Battery Slot [C1EC] (battery absent) ahci 0000:00:12.0: version 3.0 IOAPIC[0]: Set routing entry (2-16 -> 0x49 -> IRQ 16 Mode:1 Active:1) ahci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xcc309000 port 0xcc309100 irq 16 ata2: DUMMY ata3: DUMMY ata4: DUMMY pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5040 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5048 irq 15 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver IOAPIC[0]: Set routing entry (2-23 -> 0x51 -> IRQ 23 Mode:1 Active:1) ehci_hcd 0000:00:13.5: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 23, io mem 0xcc306000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 23, io mem 0xcc301000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected IOAPIC[0]: Set routing entry (2-17 -> 0x59 -> IRQ 17 Mode:1 Active:1) ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xcc302000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:13.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 17, io mem 0xcc303000 ata5.00: ATAPI: TSSTcorpCDW/DVD TS-L462D, HH08, max MWDMA2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xcc304000 ata5.00: configured for MWDMA2 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: PCI INT C -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 17, io mem 0xcc305000 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected i8042: PNP: PS/2 Controller [PNP0303:C249,PNP0f13:C24A] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram EDAC MC: Ver: 2.1.0 Feb 25 2011 EDAC amd64_edac: v3.3.0 EDAC amd64: DRAM ECC disabled. EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) cpuidle: using governor ladder Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 rtc_cmos 00:05: setting system clock to 2011-03-11 10:33:47 UTC (1299839627) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 4:0:0:0: CD-ROM TSSTcorp CDW/DVD TS-L462D HH08 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg1 type 5 sda: sda1 sda2 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext2 filesystem) readonly on device 8:1. devtmpfs: mounted Freeing unused kernel memory: 368k freed udev[709]: starting version 166 Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0 serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4 EXT4-fs (sda1): re-mounted. Opts: (null) EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [-- Attachment #3: lspci --] [-- Type: text/plain, Size: 19414 bytes --] 00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910] 00: 02 10 10 79 06 00 20 22 00 00 00 06 00 40 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 c4 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 42 20 05 00 50: 3c 10 c2 30 00 00 00 00 00 00 00 00 00 00 00 00 60: 88 00 00 00 30 00 c0 07 00 02 20 00 d8 f8 01 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 40 42 00 00 95 00 00 03 20 11 10 00 03 26 00 10 90: 00 00 00 98 40 c3 40 e3 00 c0 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 07 01 00 00 49 01 10 07 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 08 00 94 01 60 20 11 11 d0 00 00 00 d0: 25 05 65 00 02 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 e0 e0 00 00 04 01 00 00 00 01 00 0f f0: 00 00 00 00 00 80 80 00 00 00 00 00 00 00 00 00 00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] 00: 02 10 12 79 07 00 30 02 00 00 04 06 00 40 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 41 41 20 02 20: 10 cc 20 cc 01 c0 f1 c7 00 00 00 00 00 00 00 00 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 0c 00 40: 00 00 00 00 08 b0 03 a8 00 00 00 00 3c 10 c2 30 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 0d 00 00 00 3c 10 c2 30 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:05.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1) [1002:7915] 00: 02 10 15 79 07 00 10 00 00 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 20 20 00 21 31 00 00 20: 00 c8 f0 cb f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 04 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 03 c8 00 00 00 00 10 80 41 01 20 80 00 00 60: 10 08 00 00 11 0c 10 f7 00 00 01 11 00 00 00 00 70: c0 03 00 00 00 00 01 00 00 00 00 00 00 00 00 00 80: 05 b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 0d b8 00 00 3c 10 c2 30 08 00 03 a8 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: a5 00 00 00 02 01 00 04 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] 00: 02 10 80 43 07 00 30 02 00 01 06 01 10 40 00 00 10: 01 90 00 00 09 90 00 00 11 90 00 00 19 50 00 00 20: 21 50 00 00 00 90 30 cc 00 00 00 00 02 10 80 43 30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00 40: 10 00 8e 02 01 00 10 00 01 00 00 00 00 00 00 00 50: 05 00 84 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 12 00 10 00 0f 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 06 00 00 2c d6 01 b4 00 d6 01 b4 00 90: d6 01 b4 00 d6 01 b4 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 78 00 00 00 00 00 00 00 78 00 00 b0: 00 00 00 00 00 78 00 00 00 00 00 00 00 78 00 00 c0: 00 20 00 00 80 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] 00: 02 10 87 43 07 00 a0 02 00 10 03 0c 10 40 80 00 10: 00 10 30 cc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00 40: 80 1f 1a 01 0a 84 b7 18 07 35 00 00 00 00 00 00 50: 00 9d 00 00 00 00 00 00 ff ff ff ff ff 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 ff 00 00 80 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] 00: 02 10 88 43 07 00 a0 02 00 10 03 0c 10 40 00 00 10: 00 20 30 cc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] 00: 02 10 89 43 07 00 a0 02 00 10 03 0c 10 40 00 00 10: 00 30 30 cc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] 00: 02 10 8a 43 07 00 a0 02 00 10 03 0c 10 40 00 00 10: 00 40 30 cc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] 00: 02 10 8b 43 07 00 a0 02 00 10 03 0c 10 40 00 00 10: 00 50 30 cc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] 00: 02 10 86 43 17 00 b0 02 00 20 03 0c 10 40 00 00 10: 00 60 30 cc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 c0 00 00 00 00 00 00 00 0b 04 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 40 00 0e 08 00 00 00 00 00 00 00 00 00 00 00 00 60: 20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 00 00 00 00 08 c0 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 e4 02 7e 00 00 40 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 0a 00 e0 20 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14) 00: 02 10 85 43 03 00 30 02 14 00 05 0c 00 00 80 00 10: 01 82 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00 40: d4 33 00 04 00 00 00 00 0f ff 00 00 00 00 00 00 50: f0 0f 00 00 00 00 00 00 11 82 f0 0f 00 00 00 00 60: 01 00 25 00 bf 39 de 03 3f d3 00 00 20 00 00 00 70: 00 01 00 00 08 00 c0 fe ff 4b 00 00 00 00 f0 0f 80: 50 01 c2 3e 00 00 00 00 00 00 00 00 8c 00 00 80 90: 01 82 00 00 f9 ce bf 00 00 00 00 00 00 00 00 00 a0: 00 00 ff ff ff ff 78 09 13 cc 13 02 16 7b 20 00 b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0b 0f 39 c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: d8 0c 00 00 00 00 44 00 00 00 00 00 fa 00 30 01 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] 00: 02 10 8c 43 05 00 20 02 00 82 01 01 10 40 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: 41 50 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00 40: 5d 20 00 00 ff 20 00 00 00 01 04 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 40 00 10 2c 01 07 01 00 00 00 ff ff 0f 00 70: 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] 00: 02 10 83 43 06 00 10 04 00 00 03 04 10 40 00 00 10: 04 00 00 a4 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00 40: 00 00 00 00 01 00 00 00 00 00 00 00 01 00 00 00 50: 01 00 42 c8 00 00 00 00 00 00 00 00 00 00 00 00 60: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] 00: 02 10 8d 43 0f 00 20 02 00 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 04 00 00 00 bc 0d c3 ff 1b ff 4e 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 0a 00 00 0f 00 00 00 f0 ff ff ff 70: 67 45 23 01 00 00 00 00 01 00 00 00 05 00 00 00 80: 08 00 03 a8 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 20 30 b8 ff 00 00 00 00 00 00 00 00 00 00 00 00 b0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] 00: 02 10 84 43 27 00 a0 02 00 01 04 06 00 40 81 00 10: 00 00 00 00 00 00 00 00 00 02 03 40 10 10 80 22 20: 00 cc 00 cc 00 a0 f0 a3 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 00 40: 26 00 3c ff 00 00 00 00 0c 01 3c d1 03 02 00 00 50: 01 08 00 00 08 00 03 a8 00 00 00 00 85 00 ff ff 60: ca 0e 17 00 ba 98 10 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 02 06 e0: 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 60: 00 00 01 00 e4 00 00 00 20 c8 2f 0f 0c 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 08 00 01 21 20 a8 11 11 22 05 35 80 02 00 00 00 90: 78 01 70 01 00 00 ff 00 07 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 03 00 00 00 00 00 9f 00 00 00 00 00 01 00 00 00 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 03 00 e0 00 80 ff ef 00 03 00 f0 00 00 ff ff 00 a0: 03 00 c8 00 00 ff df 00 03 00 c0 00 80 ff c7 00 b0: 03 0a 00 00 00 0b 00 00 03 00 a0 00 00 ff bf 00 c0: 00 00 00 00 00 00 00 00 13 10 00 00 00 f0 0f 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 03 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 00 80 00 01 00 90 00 00 00 00 00 00 00 00 00 50: 01 00 00 00 01 00 40 00 00 00 00 00 00 00 00 00 60: e0 3f 08 00 00 00 00 00 e0 3f 38 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00 80: 01 05 00 00 00 00 00 00 24 c2 aa 5d 20 13 12 08 90: 20 04 01 00 6a 80 11 a7 38 00 00 80 00 00 00 00 a0: ff 06 00 5d 00 00 00 00 00 00 00 00 00 00 00 00 b0: 50 47 79 db 99 00 00 00 48 40 10 52 b5 60 be a1 c0: 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 3f 80 0c 0c 23 13 a3 3c 21 88 0a 02 96 03 10 80 e0: 63 02 08 ec 03 1a 99 2c 19 c0 00 83 b8 01 0c 88 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] 00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 40: ff 3b 04 00 40 00 10 0a 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 80 20 51 ec 60: 35 00 00 00 21 77 1f 00 c0 00 00 00 00 00 00 00 70: 11 01 32 51 21 40 30 50 00 2a 00 08 1b 21 00 00 80: 31 37 07 33 13 31 13 31 00 00 00 00 00 00 00 00 90: 00 00 00 00 97 20 00 00 60 01 02 44 00 00 00 00 a0: 9a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 01 a7 0d 00 00 00 00 09 25 26 26 00 e0: 00 00 00 00 20 0e 5d 00 01 17 00 00 00 00 00 00 f0: 0f 00 10 00 00 00 00 00 00 00 00 00 82 0f 04 00 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690M [Radeon X1200 Series] [1002:791f] 00: 02 10 1f 79 07 00 10 00 00 00 00 03 10 40 00 00 10: 0c 00 00 c0 00 00 00 00 04 00 10 cc 00 00 00 00 20: 01 40 00 00 00 00 20 cc 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 50: 01 80 02 06 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02:04.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b6) 00: 80 11 76 04 07 00 10 02 b6 00 07 06 00 40 82 00 10: 00 00 00 cc dc 00 00 02 02 03 06 b0 00 00 00 a0 20: 00 f0 ff a3 00 00 00 a8 00 f0 ff ab 00 10 00 00 30: fc 10 00 00 00 14 00 00 fc 14 00 00 0a 01 80 07 40: 3c 10 c2 30 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 a0 30 00 00 00 00 63 04 63 04 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 bf 00 30 00 00 00 00 00 00 c0: 3c 10 c2 30 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 0a fe e0: 00 40 c0 24 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [-- Attachment #4: Type: text/plain, Size: 3208 bytes --] > This reminds me on some HP laptop issues, see > https://bugzilla.kernel.org/show_bug.cgi?id=11715 > https://bugzilla.kernel.org/show_bug.cgi?id=11516 > The BIOSes on HP laptops somehow checked IO-APIC configuration > and set trip_points differently (for unknown reason). > > But I need above debug info to sort this out. > I am running a HP Compaq 6515b laptop (unfortunately) . Sigh. > > Thanks, > > Andreas > > > On Thu, Mar 10, 2011 at 07:04:51PM -0500, Wang Lei wrote: >> "Rafael J. Wysocki" <rjw@sisk.pl> writes: >> >> > On Thursday, March 10, 2011, Wang Lei wrote: >> >> "Rafael J. Wysocki" <rjw@sisk.pl> writes: >> >> >> >> > On Wednesday, March 09, 2011, Wang Lei wrote: >> >> >> "Rafael J. Wysocki" <rjw@sisk.pl> writes: >> >> >> >> >> >> > >> >> >> > There was only one commit in that area since 2.6.38-rc6, but it shouldn't >> >> >> > affect the functionality this way. >> >> >> > >> >> >> > Is yout thermal management controlled by ACPI? >> >> >> > >> >> >> > Rafael >> >> >> >> >> >> Thanks for your reply! >> >> >> >> >> >> How could I know that? >> >> > >> >> > What does "ls -l /sys/class/thermal/cooling_device0/device" say? >> >> > >> >> > Rafael >> >> >> >> [~]$ ls -l /sys/class/thermal/cooling_device0/device >> >> lrwxrwxrwx 1 root root 0 Mar 10 07:13 >> >> /sys/class/thermal/cooling_device0/device -> >> >> ../../../LNXSYSTM:00/device:47/PNP0C0B:00 >> >> [~]$ >> > >> > That's ACPI. >> > >> > I don't know, however, which change might cause the problem to happen. >> > >> > Can you bisect the commits between 2.6.38-rc6 and -rc7 to find the one that >> > introduced the issue? >> > >> > Rafael >> >> Thanks, Rafael. >> Bisect stopped at commit 7f74f8f28a2bd9db9404f7d364e2097a0c42cc12 >> >> -------------------- >> [~/repository/kernel]$ git bisect good >> 7f74f8f28a2bd9db9404f7d364e2097a0c42cc12 is the first bad commit >> commit 7f74f8f28a2bd9db9404f7d364e2097a0c42cc12 >> Author: Andreas Herrmann <andreas.herrmann3@amd.com> >> Date: Thu Feb 24 15:53:46 2011 +0100 >> >> x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systems >> >> On some SB800 systems polarity for IOAPIC pin2 is wrongly >> specified as low active by BIOS. This caused system hangs after >> resume from S3 when HPET was used in one-shot mode on such >> systems because a timer interrupt was missed (HPET signal is >> high active). >> >> For more details see: >> >> http://marc.info/?l=linux-kernel&m=129623757413868 >> >> Tested-by: Manoj Iyer <manoj.iyer@canonical.com> >> Tested-by: Andre Przywara <andre.przywara@amd.com> >> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> >> Cc: Borislav Petkov <borislav.petkov@amd.com> >> Cc: stable@kernel.org # 37.x, 32.x >> LKML-Reference: <20110224145346.GD3658@alberich.amd.com> >> Signed-off-by: Ingo Molnar <mingo@elte.hu> >> >> :040000 040000 918adb3e08ef8cd258016dc46afab842e1be65fc 77d76d6f2451b16f963ce1ffe183aacfed9d994d M arch >> [~/repository/kernel]$ >> -------------------- >> >> So, I Cc to Andreas Herrmann, hope you will notice and help fix this. >> >> Thanks, all you hackers! >> >> -- >> Regards, >> Lei >> -- Regards, Lei ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [BUG] Fans keep running, first found since v2.6.38-rc7 2011-03-11 10:47 ` Wang Lei @ 2011-03-11 11:38 ` Andreas Herrmann 2011-03-11 12:47 ` Wang Lei 0 siblings, 1 reply; 9+ messages in thread From: Andreas Herrmann @ 2011-03-11 11:38 UTC (permalink / raw) To: Wang Lei Cc: Andreas Herrmann, Rafael J. Wysocki, linux-kernel@vger.kernel.org, ACPI Devel Mailing List On Fri, Mar 11, 2011 at 06:47:34PM +0800, Wang Lei wrote: > Hi Andreas, > > Thanks for your reply. > > Andreas Herrmann <andreas.herrmann3@amd.com> writes: > > > Hi Lei, > > > > can you please provide information, which system you are using. dmesg > > (please use apic=debug kernel parameter), output of lspci -nnxxxx (as > > root), > > > > I'm using debian sid with customized kernel. dmesg and lspci are > attached. > Initializing cgroup subsys cpuset > Initializing cgroup subsys cpu > Linux version 2.6.38-rc6+ (root@localhost) (gcc version 4.4.5 (Debian 4.4.5-12) ) #1 SMP Fri Feb 25 20:01:40 CST 2011 > Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-rc6+ root=/dev/sda1 ro apic=debug So that was the good case (all working as expected). > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 0000000097fb0000 (usable) > BIOS-e820: 0000000097fb0000 - 0000000097fc8000 (reserved) > BIOS-e820: 0000000097fc8000 - 0000000097fe7fb8 (ACPI NVS) > BIOS-e820: 0000000097fe7fb8 - 00000000a0000000 (reserved) > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) > BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) > BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > NX (Execute Disable) protection: active > DMI 2.4 present. > DMI: Hewlett-Packard HP Compaq 6515b (GL087PA#AB2)/30C2, BIOS 68YTT Ver. F.05 04/26/2007 ^^^^^^^^^^^^^^^ Hmm, I thought that this might be the case. Can you please try to boot -rc7 with kernel parameter acpi_skip_timer_override and send the same output (dmesg again also with apic=debug and lspci -nnxxxx) Thanks, Andreas PS: My assumption is that the patch in -rc7 leads to usage of IO-APIC pin2 for timer interrupt (potentially I have broken chipset revision determination for some SB600.) ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [BUG] Fans keep running, first found since v2.6.38-rc7 2011-03-11 11:38 ` Andreas Herrmann @ 2011-03-11 12:47 ` Wang Lei 2011-03-11 14:28 ` Andreas Herrmann 0 siblings, 1 reply; 9+ messages in thread From: Wang Lei @ 2011-03-11 12:47 UTC (permalink / raw) To: Andreas Herrmann Cc: Andreas Herrmann, Rafael J. Wysocki, linux-kernel@vger.kernel.org, ACPI Devel Mailing List [-- Attachment #1: Type: text/plain, Size: 673 bytes --] On 2011-03-11 19:38:39 +0800, Andreas wrote: > > Can you please try to boot -rc7 with kernel parameter acpi_skip_timer_override > and send the same output (dmesg again also with apic=debug and lspci -nnxxxx) > > > Thanks, > > Andreas > > PS: My assumption is that the patch in -rc7 leads to usage of IO-APIC > pin2 for timer interrupt (potentially I have broken chipset > revision determination for some SB600.) Hi Andreas, I did what you said, appended acpi_skip_timer_override when boot -rc7. Now the fans work OK. I don't know why and I don't think this is the final solution. If not, I'll wait. Anyway, Thank you very much! Attach demsg and lspci output. [-- Attachment #2: dmesg --] [-- Type: text/plain, Size: 33736 bytes --] Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.38-rc7-mute (lei@localhost) (gcc version 4.5.2 (Debian 4.5.2-5) ) #1 SMP Fri Mar 11 20:07:53 CST 2011 Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-rc7-mute root=/dev/sda1 ro apic=debug acpi_skip_timer_override BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000097fb0000 (usable) BIOS-e820: 0000000097fb0000 - 0000000097fc8000 (reserved) BIOS-e820: 0000000097fc8000 - 0000000097fe7fb8 (ACPI NVS) BIOS-e820: 0000000097fe7fb8 - 00000000a0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI 2.4 present. DMI: Hewlett-Packard HP Compaq 6515b (GL087PA#AB2)/30C2, BIOS 68YTT Ver. F.05 04/26/2007 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x97fb0 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C0FFF write-protect C1000-C3FFF write-back C4000-C4FFF write-protect C5000-C7FFF write-back C8000-C8FFF write-protect C9000-CBFFF write-back CC000-CCFFF write-protect CD000-CFFFF write-back D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFF0000000 write-back 2 base 0090000000 mask FFF8000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-0000000097fb0000 0000000000 - 0097e00000 page 2M 0097e00000 - 0097fb0000 page 4k kernel direct mapping tables up to 97fb0000 @ 1fffb000-20000000 ACPI: RSDP 00000000000fe0b0 00024 (v02 HP ) ACPI: XSDT 0000000097fc81bc 00064 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 0000000097fc8084 000F4 (v04 HP 0944 00000003 HP 00000001) ACPI Error: 32/64X address mismatch in Pm2ControlBlock: 0x00008800/0x0000000000008100, using 32 (20110112/tbfadt-427) ACPI: DSDT 0000000097fc84a4 11437 (v01 HP SB400 00010000 MSFT 03000001) ACPI: FACS 0000000097fe7d80 00040 ACPI: SLIC 0000000097fc8220 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: EPTH 0000000097fc8398 00038 (v01 HP 0944 00000001 HP 00000001) ACPI: APIC 0000000097fc83d0 00062 (v01 HP 0944 00000001 HP 00000001) ACPI: MCFG 0000000097fc8434 0003C (v01 HP 0944 00000001 HP 00000001) ACPI: TCPA 0000000097fc8470 00032 (v02 HP 0944 00000001 HP 00000001) ACPI: SSDT 0000000097fd98db 00059 (v01 HP HPQNLP 00000001 MSFT 03000001) ACPI: SSDT 0000000097fd9934 00182 (v01 HP PSSTBLID 00000001 HP 00000001) ACPI: Local APIC address 0xfee00000 mapped APIC to ffffffffff5fc000 ( fee00000) [ffffea0000000000-ffffea00021fffff] PMD -> [ffff880095000000-ffff8800971fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x00097fb0 On node 0 totalpages: 622399 DMA zone: 56 pages used for memmap DMA zone: 2 pages reserved DMA zone: 3925 pages, LIFO batch:0 DMA32 zone: 8455 pages used for memmap DMA32 zone: 609961 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 mapped APIC to ffffffffff5fc000 ( fee00000) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 00 Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 0, trig 0, bus 00, IRQ 02, APIC ID 2, APIC INT 02 Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05 Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 ACPI: IRQ9 used by override. Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped IOAPIC to ffffffffff5fb000 (fec00000) nr_irqs_gsi: 40 Allocating PCI resources starting at a0000000 (gap: a0000000:40000000) setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff880097c00000 s72640 r8192 d21568 u1048576 pcpu-alloc: s72640 r8192 d21568 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 613886 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-rc7-mute root=/dev/sda1 ro apic=debug acpi_skip_timer_override PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 412e000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 2443420k/2490048k available (2775k kernel code, 452k absent, 46176k reserved, 1225k data, 368k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. NR_IRQS:4352 nr_irqs:512 16 Extended CMOS year: 2000 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled allocated 24903680 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Fast TSC calibration using PIT Detected 1593.704 MHz processor. Marking TSC unstable due to TSCs unsynchronized Calibrating delay loop (skipped), value calculated using timer frequency.. 3187.40 BogoMIPS (lpj=1593704) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 Initializing cgroup subsys ns ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys blkio tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine ACPI: Core revision 20110112 Getting VERSION: 80050010 Getting VERSION: 80050010 Getting ID: 0 Getting ID: ff000000 Getting LVT0: 700 Getting LVT1: 400 Setting APIC routing to flat enabled ExtINT on CPU#0 ENABLING IO-APIC IRQs init IO_APIC IRQs IOAPIC[0]: Set routing entry (2-0 -> 0x30 -> IRQ 0 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:1) IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02 Using local APIC timer interrupts. calibrating APIC timer ... ... lapic delta = 1246683 ... PM-Timer delta = 357899 ... PM-Timer result ok ..... delta 1246683 ..... mult: 53552767 ..... calibration result: 199469 ..... CPU clock speed is 1595.0753 MHz. ..... host bus clock speed is 199.0469 MHz. Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f MCE: In-kernel MCE decoding enabled. Booting Node 0, Processors #1 Ok. masked ExtINT on CPU#1 System has AMD C1E enabled Brought up 2 CPUs Total of 2 processors activated (6378.76 BogoMIPS). Switch to broadcast mode on CPU1 Switch to broadcast mode on CPU0 devtmpfs: initialized NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 00000000a0000000 aka 2560M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [c8000000, dfffffff] node 0 link 0: mmio [c0000000, c7ffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [a0000000, bfffffff] bus: [00, ff] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xa0000000-0xfcffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [C171] (off) ACPI: Power Resource [C24C] (on) ACPI: Power Resource [C395] (off) ACPI: Power Resource [C396] (off) ACPI: Power Resource [C397] (off) ACPI: Power Resource [C398] (off) ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [C08B] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xa0000000-0xfedfffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffffffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) pci 0000:00:00.0: [1002:7910] type 0 class 0x000600 pci 0000:00:01.0: [1002:7912] type 1 class 0x000604 pci 0000:00:05.0: [1002:7915] type 1 class 0x000604 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:12.0: [1002:4380] type 0 class 0x000101 pci 0000:00:12.0: reg 10: [io 0x9000-0x9007] pci 0000:00:12.0: reg 14: [io 0x9008-0x900b] pci 0000:00:12.0: reg 18: [io 0x9010-0x9017] pci 0000:00:12.0: reg 1c: [io 0x5018-0x501b] pci 0000:00:12.0: reg 20: [io 0x5020-0x502f] pci 0000:00:12.0: reg 24: [mem 0xcc309000-0xcc3093ff] pci 0000:00:12.0: set SATA to AHCI mode pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03 pci 0000:00:13.0: reg 10: [mem 0xcc301000-0xcc301fff] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03 pci 0000:00:13.1: reg 10: [mem 0xcc302000-0xcc302fff] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03 pci 0000:00:13.2: reg 10: [mem 0xcc303000-0xcc303fff] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03 pci 0000:00:13.3: reg 10: [mem 0xcc304000-0xcc304fff] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03 pci 0000:00:13.4: reg 10: [mem 0xcc305000-0xcc305fff] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03 pci 0000:00:13.5: reg 10: [mem 0xcc306000-0xcc3060ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.5: PME# disabled pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 pci 0000:00:14.0: reg 10: [io 0x8200-0x820f] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101 pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0x5040-0x504f] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 pci 0000:00:14.2: reg 10: [mem 0xcc308000-0xcc30bfff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:00:14.3: [1002:438d] type 0 class 0x000601 pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 PCI: peer root bus 00 res updated from pci conf pci 0000:01:05.0: [1002:791f] type 0 class 0x000300 pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:01:05.0: reg 18: [mem 0xcc100000-0xcc10ffff 64bit] pci 0000:01:05.0: reg 20: [io 0x4000-0x40ff] pci 0000:01:05.0: reg 24: [mem 0xcc200000-0xcc2fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xcc100000-0xcc2fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xc8000000-0xcbffffff] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:02:04.0: [1180:0476] type 2 class 0x000607 pci 0000:02:04.0: reg 10: [mem 0xcc000000-0xcc000fff] pci 0000:02:04.0: supports D1 D2 pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:04.0: PME# disabled pci 0000:00:14.4: PCI bridge to [bus 02-03] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:14.4: bridge window [mem 0xcc000000-0xcc0fffff] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xa0000000-0xfcffffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C08B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C08C._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C0FC._PRT] ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled. SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:14.2: address space collision: [mem 0xcc308000-0xcc30bfff 64bit] conflicts with 0000:00:12.0 [mem 0xcc309000-0xcc3093ff] reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 0000000097fb0000 - 0000000097ffffff printing PIC contents ... PIC IMR: ffff ... PIC IRR: 0003 ... PIC ISR: 0000 ... PIC ELCR: 0e20 printing local APIC contents on CPU#0/0: ... APIC ID: 00000000 (0) ... APIC VERSION: 80050010 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 00000000 (00) ... APIC PROCPRI: 00000000 ... APIC LDR: 01000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC TMR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC IRR field: 0000000000000000000000000000000000000000000000000000000000008000 ... APIC ESR: 00000000 ... APIC ICR: 000008fd ... APIC ICR2: 02000000 ... APIC LVTT: 000300ef ... APIC LVTPC: 00000400 ... APIC LVT0: 00010700 ... APIC LVT1: 00000400 ... APIC LVTERR: 000000fe ... APIC TMICT: 00000000 ... APIC TMCCT: 00000000 ... APIC TDCR: 00000003 ... APIC EFEAT: 00010003 ... APIC ECTRL: 00000000 ... APIC EILVT0: 000000f9 number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 00000000 ....... : physical APIC id: 00 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178021 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0021 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 003 0 0 0 0 0 1 1 30 01 003 1 0 0 0 0 1 1 31 02 003 1 0 0 0 0 0 0 32 03 003 0 0 0 0 0 1 1 33 04 003 0 0 0 0 0 1 1 34 05 003 0 0 0 0 0 1 1 35 06 003 0 0 0 0 0 1 1 36 07 003 0 0 0 0 0 1 1 37 08 003 0 0 0 0 0 1 1 38 09 003 0 1 0 1 0 1 1 39 0a 003 0 0 0 0 0 1 1 3A 0b 003 0 0 0 0 0 1 1 3B 0c 003 0 0 0 0 0 1 1 3C 0d 003 0 0 0 0 0 1 1 3D 0e 003 0 0 0 0 0 1 1 3E 0f 003 0 0 0 0 0 1 1 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ2 -> 0:2 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x000e0000-0x000fffff] pnp 00:00: [mem 0x00100000-0xffffffff] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0xffffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [bus 00-ff] pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: [io 0x0000-0x0cf7 window] pnp 00:01: [io 0x0d00-0xffff window] pnp 00:01: [mem 0x000a0000-0x000bffff window] pnp 00:01: [mem 0xa0000000-0xfedfffff window] pnp 00:01: [mem 0xfee01000-0xffffffff window] pnp 00:01: [mem 0x000d0000-0x000dffff window] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:02: [io 0x00f0-0x00ff] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) pnp 00:02: [irq 13] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:03: [io 0x0000-0x000f] pnp 00:03: [io 0x0080-0x008f] pnp 00:03: [io 0x00c0-0x00df] pnp 00:03: [dma 4] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:04: [io 0x0061] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:05: [io 0x0070-0x0071] pnp 00:05: [io 0x0072-0x0073] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) pnp 00:05: [irq 8] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:06: [io 0x0060] pnp 00:06: [io 0x0064] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) pnp 00:06: [irq 1] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) pnp 00:07: [irq 12] pnp 00:07: Plug and Play ACPI device, IDs SYN0131 SYN0100 SYN0002 PNP0f13 (active) pnp 00:08: [io 0x0010-0x001f] pnp 00:08: [io 0x0022-0x0023] pnp 00:08: [io 0x002e-0x002f] pnp 00:08: [io 0x004e-0x004f] pnp 00:08: [io 0x0092] pnp 00:08: [io 0x00b0-0x00b1] pnp 00:08: [io 0x040b] pnp 00:08: [io 0x04d0-0x04d1] pnp 00:08: [io 0x04d6] pnp 00:08: [io 0x0500-0x053f] pnp 00:08: [io 0x0c00-0x0c01] pnp 00:08: [io 0x0c14] pnp 00:08: [io 0x0c50-0x0c51] pnp 00:08: [io 0x0c52] pnp 00:08: [io 0x0c6c] pnp 00:08: [io 0x0c6f] pnp 00:08: [io 0x0cd0-0x0cdf] pnp 00:08: [mem 0xffb00000-0xffbfffff] pnp 00:08: [mem 0xfff00000-0xffffffff] system 00:08: [io 0x040b] has been reserved system 00:08: [io 0x04d0-0x04d1] has been reserved system 00:08: [io 0x04d6] has been reserved system 00:08: [io 0x0500-0x053f] has been reserved system 00:08: [io 0x0c00-0x0c01] has been reserved system 00:08: [io 0x0c14] has been reserved system 00:08: [io 0x0c50-0x0c51] has been reserved system 00:08: [io 0x0c52] has been reserved system 00:08: [io 0x0c6c] has been reserved system 00:08: [io 0x0c6f] has been reserved system 00:08: [io 0x0cd0-0x0cdf] has been reserved system 00:08: [mem 0xffb00000-0xffbfffff] could not be reserved system 00:08: [mem 0xfff00000-0xffffffff] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) IOAPIC[0]: Set routing entry (2-22 -> 0x29 -> IRQ 22 Mode:0 Active:0) pnp 00:09: [irq 22] pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active) pnp 00:0a: [io 0x8000-0x802f] pnp 00:0a: [io 0x8100-0x811f] pnp 00:0a: [mem 0xe0000000-0xefffffff] pnp 00:0a: [mem 0xfec00000-0xfec000ff] pnp 00:0a: [mem 0xfed45000-0xfed8ffff] system 00:0a: [io 0x8000-0x802f] has been reserved system 00:0a: [io 0x8100-0x811f] has been reserved system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved system 00:0a: [mem 0xfec00000-0xfec000ff] could not be reserved system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [mem 0x000cd400-0x000cffff] pnp 00:0b: [mem 0x00000000-0x07ffffff] pnp 00:0b: [mem 0xfee00000-0xfee00fff] system 00:0b: [mem 0x000cd400-0x000cffff] has been reserved system 00:0b: [mem 0x00000000-0x07ffffff] could not be reserved system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered Switching to clocksource acpi_pm pci 0000:00:14.4: BAR 9: assigned [mem 0xa0000000-0xa3ffffff pref] pci 0000:00:14.2: BAR 0: assigned [mem 0xa4000000-0xa4003fff 64bit] pci 0000:00:14.2: BAR 0: set to [mem 0xa4000000-0xa4003fff 64bit] (PCI address [0xa4000000-0xa4003fff]) pci 0000:00:14.4: BAR 7: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xcc100000-0xcc2fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xc8000000-0xcbffffff] pci 0000:00:05.0: bridge window [mem pref disabled] pci 0000:02:04.0: BAR 9: assigned [mem 0xa0000000-0xa3ffffff pref] pci 0000:02:04.0: BAR 10: assigned [mem 0xa8000000-0xabffffff] pci 0000:02:04.0: BAR 7: assigned [io 0x1000-0x10ff] pci 0000:02:04.0: BAR 8: assigned [io 0x1400-0x14ff] pci 0000:02:04.0: CardBus bridge to [bus 03-06] pci 0000:02:04.0: bridge window [io 0x1000-0x10ff] pci 0000:02:04.0: bridge window [io 0x1400-0x14ff] pci 0000:02:04.0: bridge window [mem 0xa0000000-0xa3ffffff pref] pci 0000:02:04.0: bridge window [mem 0xa8000000-0xabffffff] pci 0000:00:14.4: PCI bridge to [bus 02-03] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] pci 0000:00:14.4: bridge window [mem 0xcc000000-0xcc0fffff] pci 0000:00:14.4: bridge window [mem 0xa0000000-0xa3ffffff pref] pci 0000:00:05.0: setting latency timer to 64 IOAPIC[0]: Set routing entry (2-20 -> 0x41 -> IRQ 20 Mode:1 Active:1) pci 0000:02:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci_bus 0000:00: resource 4 [io 0x0000-0xffff] pci_bus 0000:00: resource 5 [mem 0xa0000000-0xfcffffffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] pci_bus 0000:01: resource 1 [mem 0xcc100000-0xcc2fffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff] pci_bus 0000:20: resource 1 [mem 0xc8000000-0xcbffffff] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xcc000000-0xcc0fffff] pci_bus 0000:02: resource 2 [mem 0xa0000000-0xa3ffffff pref] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] pci_bus 0000:02: resource 5 [mem 0xa0000000-0xfcffffffff] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:03: resource 0 [io 0x1000-0x10ff] pci_bus 0000:03: resource 1 [io 0x1400-0x14ff] pci_bus 0000:03: resource 2 [mem 0xa0000000-0xa3ffffff pref] pci_bus 0000:03: resource 3 [mem 0xa8000000-0xabffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:01:05.0: Boot video device PCI: CLS 64 bytes, default 64 msgmni has been set to 4772 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) ACPI: AC Adapter [C1EB] (on-line) input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [C28D] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [C265] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: Fan [C399] (off) ACPI: Fan [C39A] (off) ACPI: Fan [C39B] (off) ACPI: Fan [C39C] (off) ACPI: acpi_idle registered with cpuidle ACPI: processor limited to max C-state 1 thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ1] (44 C) ACPI: Battery Slot [C1ED] (battery absent) ACPI: Battery Slot [C1EC] (battery absent) ahci 0000:00:12.0: version 3.0 IOAPIC[0]: Set routing entry (2-16 -> 0x49 -> IRQ 16 Mode:1 Active:1) ahci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xcc309000 port 0xcc309100 irq 16 ata2: DUMMY ata3: DUMMY ata4: DUMMY pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5040 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5048 irq 15 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver IOAPIC[0]: Set routing entry (2-23 -> 0x51 -> IRQ 23 Mode:1 Active:1) ehci_hcd 0000:00:13.5: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 23, io mem 0xcc306000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 23, io mem 0xcc301000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected IOAPIC[0]: Set routing entry (2-17 -> 0x59 -> IRQ 17 Mode:1 Active:1) ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xcc302000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:13.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 17, io mem 0xcc303000 ata5.00: ATAPI: TSSTcorpCDW/DVD TS-L462D, HH08, max MWDMA2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xcc304000 ata5.00: configured for MWDMA2 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: PCI INT C -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 17, io mem 0xcc305000 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected i8042: PNP: PS/2 Controller [PNP0303:C249,PNP0f13:C24A] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram EDAC MC: Ver: 2.1.0 Mar 11 2011 EDAC amd64_edac: v3.3.0 EDAC amd64: DRAM ECC disabled. EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) cpuidle: using governor ladder Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 rtc_cmos 00:05: setting system clock to 2011-03-11 12:32:12 UTC (1299846732) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: SB600 AHCI: limiting to 255 sectors per cmd input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 4:0:0:0: CD-ROM TSSTcorp CDW/DVD TS-L462D HH08 PQ: 0 ANSI: 5 sda: sda1 sda2 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg1 type 5 EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext2 filesystem) readonly on device 8:1. devtmpfs: mounted Freeing unused kernel memory: 368k freed udev[709]: starting version 166 Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0 serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4 EXT4-fs (sda1): re-mounted. Opts: (null) EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [-- Attachment #3: lspci --] [-- Type: text/plain, Size: 19414 bytes --] 00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910] 00: 02 10 10 79 06 00 20 22 00 00 00 06 00 40 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 c4 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 42 20 05 00 50: 3c 10 c2 30 00 00 00 00 00 00 00 00 00 00 00 00 60: 88 00 00 00 30 00 c0 07 00 02 20 00 d8 f8 01 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 40 42 00 00 95 00 00 03 20 11 10 00 03 26 00 10 90: 00 00 00 98 40 c3 40 e3 00 c0 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 07 01 00 00 49 01 10 07 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 08 00 94 01 60 20 11 11 d0 00 00 00 d0: 25 05 65 00 02 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 e0 e0 00 00 04 01 00 00 00 01 00 0f f0: 00 00 00 00 00 80 80 00 00 00 00 00 00 00 00 00 00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] 00: 02 10 12 79 07 00 30 02 00 00 04 06 00 40 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 41 41 20 02 20: 10 cc 20 cc 01 c0 f1 c7 00 00 00 00 00 00 00 00 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 0c 00 40: 00 00 00 00 08 b0 03 a8 00 00 00 00 3c 10 c2 30 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 0d 00 00 00 3c 10 c2 30 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:05.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1) [1002:7915] 00: 02 10 15 79 07 00 10 00 00 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 20 20 00 21 31 00 00 20: 00 c8 f0 cb f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 04 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 03 c8 00 00 00 00 10 80 41 01 20 80 00 00 60: 10 08 00 00 11 0c 10 f7 00 00 01 11 00 00 00 00 70: c0 03 00 00 00 00 01 00 00 00 00 00 00 00 00 00 80: 05 b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 0d b8 00 00 3c 10 c2 30 08 00 03 a8 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: a5 00 00 00 02 01 00 04 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] 00: 02 10 80 43 07 00 30 02 00 01 06 01 10 40 00 00 10: 01 90 00 00 09 90 00 00 11 90 00 00 19 50 00 00 20: 21 50 00 00 00 90 30 cc 00 00 00 00 02 10 80 43 30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00 40: 10 00 8e 02 01 00 10 00 01 00 00 00 00 00 00 00 50: 05 00 84 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 12 00 10 00 0f 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 06 00 00 2c d6 01 b4 00 d6 01 b4 00 90: d6 01 b4 00 d6 01 b4 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 78 00 00 00 00 00 00 00 78 00 00 b0: 00 00 00 00 00 78 00 00 00 00 00 00 00 78 00 00 c0: 00 20 00 00 80 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] 00: 02 10 87 43 07 00 a0 02 00 10 03 0c 10 40 80 00 10: 00 10 30 cc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00 40: 80 1f 1a 01 0a 84 b7 18 07 35 00 00 00 00 00 00 50: 00 9d 00 00 00 00 00 00 ff ff ff ff ff 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 ff 00 00 80 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] 00: 02 10 88 43 07 00 a0 02 00 10 03 0c 10 40 00 00 10: 00 20 30 cc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] 00: 02 10 89 43 07 00 a0 02 00 10 03 0c 10 40 00 00 10: 00 30 30 cc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] 00: 02 10 8a 43 07 00 a0 02 00 10 03 0c 10 40 00 00 10: 00 40 30 cc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] 00: 02 10 8b 43 07 00 a0 02 00 10 03 0c 10 40 00 00 10: 00 50 30 cc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] 00: 02 10 86 43 17 00 b0 02 00 20 03 0c 10 40 00 00 10: 00 60 30 cc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 c0 00 00 00 00 00 00 00 0b 04 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 40 00 0e 08 00 00 00 00 00 00 00 00 00 00 00 00 60: 20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 00 00 00 00 08 c0 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 e4 02 7e 00 00 40 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 0a 00 e0 20 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14) 00: 02 10 85 43 03 00 30 02 14 00 05 0c 00 00 80 00 10: 01 82 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00 40: d4 33 00 04 00 00 00 00 0f ff 00 00 00 00 00 00 50: f0 0f 00 00 00 00 00 00 11 82 f0 0f 00 00 00 00 60: 01 00 25 00 bf 39 de 03 3f d3 00 00 20 00 00 00 70: 00 01 00 00 08 00 c0 fe ff 4b 00 00 00 00 f0 0f 80: 50 01 c2 3e 00 00 00 00 00 00 00 00 8c 00 00 80 90: 01 82 00 00 f9 ce bf 00 00 00 00 00 00 00 00 00 a0: 00 00 ff ff ff ff 78 09 13 cc 13 02 16 7b 20 00 b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0b 0f 39 c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: d8 0c 00 00 00 00 44 00 00 00 00 00 fa 00 30 01 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] 00: 02 10 8c 43 05 00 20 02 00 82 01 01 10 40 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: 41 50 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00 40: 5d 20 00 00 ff 20 00 00 00 01 04 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 40 00 10 2c 01 07 01 00 00 00 ff ff 0f 00 70: 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] 00: 02 10 83 43 06 00 10 04 00 00 03 04 10 40 00 00 10: 04 00 00 a4 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00 40: 00 00 00 00 01 00 00 00 00 00 00 00 01 00 00 00 50: 01 00 42 c8 00 00 00 00 00 00 00 00 00 00 00 00 60: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] 00: 02 10 8d 43 0f 00 20 02 00 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 04 00 00 00 bc 0d c3 ff 1b ff 4e 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 0a 00 00 0f 00 00 00 f0 ff ff ff 70: 67 45 23 01 00 00 00 00 01 00 00 00 05 00 00 00 80: 08 00 03 a8 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 20 30 b8 ff 00 00 00 00 00 00 00 00 00 00 00 00 b0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] 00: 02 10 84 43 27 00 a0 02 00 01 04 06 00 40 81 00 10: 00 00 00 00 00 00 00 00 00 02 03 40 10 10 80 22 20: 00 cc 00 cc 00 a0 f0 a3 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 00 40: 26 00 3c ff 00 00 00 00 0c 01 3c d1 03 02 00 00 50: 01 08 00 00 08 00 03 a8 00 00 00 00 85 00 ff ff 60: ca 0e 17 00 ba 98 10 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 02 06 e0: 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 60: 00 00 01 00 e4 00 00 00 20 c8 2f 0f 0c 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 08 00 01 21 20 a8 11 11 22 05 35 80 02 00 00 00 90: 78 01 70 01 00 00 ff 00 07 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 03 00 00 00 00 00 9f 00 00 00 00 00 01 00 00 00 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 03 00 e0 00 80 ff ef 00 03 00 f0 00 00 ff ff 00 a0: 03 00 c8 00 00 ff df 00 03 00 c0 00 80 ff c7 00 b0: 03 0a 00 00 00 0b 00 00 03 00 a0 00 00 ff bf 00 c0: 00 00 00 00 00 00 00 00 13 10 00 00 00 f0 0f 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 03 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 00 80 00 01 00 90 00 00 00 00 00 00 00 00 00 50: 01 00 00 00 01 00 40 00 00 00 00 00 00 00 00 00 60: e0 3f 08 00 00 00 00 00 e0 3f 38 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00 80: 01 05 00 00 00 00 00 00 24 c2 aa 5d 20 13 12 08 90: 20 04 01 00 6a 80 11 a7 38 00 00 80 00 00 00 00 a0: ff 06 00 5d 00 00 00 00 00 00 00 00 00 00 00 00 b0: d0 3a 9d b6 69 00 00 00 48 40 10 52 b5 60 be a1 c0: 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 3f 80 0c 0c 23 13 a3 3c 21 88 0a 02 96 03 10 80 e0: 63 02 08 ec 03 1a 99 2c 19 c0 00 83 b8 01 0c 88 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] 00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 40: ff 3b 04 00 40 00 10 0a 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 80 20 51 ec 60: 35 00 00 00 01 77 1f 00 00 00 00 00 00 00 00 00 70: 11 01 32 51 21 40 30 50 00 2a 00 08 1b 21 00 00 80: 31 37 07 33 13 31 13 31 00 00 00 00 00 00 00 00 90: 00 00 00 00 97 20 00 00 60 01 02 44 00 00 00 00 a0: 9a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 01 a7 0d 00 00 00 00 09 25 26 26 00 e0: 00 00 00 00 20 0e 5e 00 01 17 00 00 00 00 00 00 f0: 0f 00 10 00 00 00 00 00 00 00 00 00 82 0f 04 00 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690M [Radeon X1200 Series] [1002:791f] 00: 02 10 1f 79 07 00 10 00 00 00 00 03 10 40 00 00 10: 0c 00 00 c0 00 00 00 00 04 00 10 cc 00 00 00 00 20: 01 40 00 00 00 00 20 cc 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 50: 01 80 02 06 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02:04.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b6) 00: 80 11 76 04 07 00 10 02 b6 00 07 06 00 40 82 00 10: 00 00 00 cc dc 00 00 02 02 03 06 b0 00 00 00 a0 20: 00 f0 ff a3 00 00 00 a8 00 f0 ff ab 00 10 00 00 30: fc 10 00 00 00 14 00 00 fc 14 00 00 0a 01 80 07 40: 3c 10 c2 30 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 a0 30 00 00 00 00 63 04 63 04 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 bf 00 30 00 00 00 00 00 00 c0: 3c 10 c2 30 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 0a fe e0: 00 40 c0 24 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [-- Attachment #4: Type: text/plain, Size: 18 bytes --] -- Regards, Lei ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [BUG] Fans keep running, first found since v2.6.38-rc7 2011-03-11 12:47 ` Wang Lei @ 2011-03-11 14:28 ` Andreas Herrmann 2011-03-11 23:02 ` Wang Lei 0 siblings, 1 reply; 9+ messages in thread From: Andreas Herrmann @ 2011-03-11 14:28 UTC (permalink / raw) To: Wang Lei Cc: Andreas Herrmann, Rafael J. Wysocki, linux-kernel@vger.kernel.org, ACPI Devel Mailing List On Fri, Mar 11, 2011 at 08:47:01PM +0800, Wang Lei wrote: > > On 2011-03-11 19:38:39 +0800, Andreas wrote: > > > > Can you please try to boot -rc7 with kernel parameter acpi_skip_timer_override > > and send the same output (dmesg again also with apic=debug and lspci -nnxxxx) > > > > > > Thanks, > > > > Andreas > > > > PS: My assumption is that the patch in -rc7 leads to usage of IO-APIC > > pin2 for timer interrupt (potentially I have broken chipset > > revision determination for some SB600.) > Hi Andreas, > > I did what you said, appended acpi_skip_timer_override when boot -rc7. > Now the fans work OK. I don't know why and I don't think this is the > final solution. If not, I'll wait. Ok, the problem is that all SB[6-8]00 chipsets use the same PCI device ID. To differntiate the versions I need to check the revision ID. With my patch I removed some special treatment for SB600. (See http://support.amd.com/us/Embedded_TechDocs/46155_sb600_rrg_pub_3.03.pdf) Revision ID/Class Code- R - 32 bits - [PCI_Reg: 08h] Field Name Bits Default Description RevisionID 7:0 11h / This field reflects the ASIC revision. 12h / 11h : For ASIC revision A11 13h 12h : For ASIC revision A12 13h : For ASIC revision A13 For ASIC revisions after A13, by default this field will read 13h still. However, if SMBUS PCI config 70h bit 8 is set to 1, a hidden revision ID can be read from this field. The old code temporarily cleared bit 8 in PCI config 70h and received 13h as revision for device 14.0 on your system (the "hidden revision ID" shown in your lspci output is 0x14 and that is what the new code is using). For SB700/SB800 PCI config 70h is reserved ("software should not write to it") and that is why I wanted to avoid accesses to that register. (See SB700 documentation http://support.amd.com/us/Embedded_TechDocs/43009_sb7xx_rrg_pub_1.00.pdf) So the right thing to do is to correct the check for SB600 to cover all SB600 revisions w/o depending on the setting of bit 8 in PCI config 70h. Attached patch should achieve this. Can you please test this patch on top of -rc7? Thanks a lot, Andreas --- >From 8453f3aef2e2b89ba30877998dcbfc06f475e253 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann <andreas.herrmann3@amd.com> Date: Fri, 11 Mar 2011 15:16:47 +0100 Subject: [PATCH] x86, quirk: Fix SB600 revision check Commit 7f74f8f28a2bd9db9404f7d364e2097a0c42cc12 (x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systems) introduced a regression. It removed some SB600 specific code to determine the revision ID without adapting a corresponding revision ID check for SB600. See this mail thread http://marc.info/?l=linux-kernel&m=129980296006380&w=2 This patch adapts the corresponding check to cover all SB600 revisions. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> --- arch/x86/kernel/early-quirks.c | 7 ++++++- 1 files changed, 6 insertions(+), 1 deletions(-) diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index 9efbdcc..3755ef4 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -159,7 +159,12 @@ static void __init ati_bugs_contd(int num, int slot, int func) if (rev >= 0x40) acpi_fix_pin2_polarity = 1; - if (rev > 0x13) + /* + * SB600: revisions 0x11, 0x12, 0x13, 0x14, ... + * SB700: revisions 0x39, 0x3a, ... + * SB800: revisions 0x40, 0x41, ... + */ + if (rev >= 0x39) return; if (acpi_use_timer_override) -- 1.7.4.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [BUG] Fans keep running, first found since v2.6.38-rc7 2011-03-11 14:28 ` Andreas Herrmann @ 2011-03-11 23:02 ` Wang Lei 0 siblings, 0 replies; 9+ messages in thread From: Wang Lei @ 2011-03-11 23:02 UTC (permalink / raw) To: Andreas Herrmann Cc: Andreas Herrmann, Rafael J. Wysocki, linux-kernel@vger.kernel.org, ACPI Devel Mailing List [-- Attachment #1: Type: text/plain, Size: 98 bytes --] Hi Andreas, With your patch, it looks OK. In case it's useful, attached dmesg and lspci output. [-- Attachment #2: dmesg --] [-- Type: text/plain, Size: 33867 bytes --] Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.38-rc7-mute+ (lei@localhost) (gcc version 4.5.2 (Debian 4.5.2-5) ) #2 SMP Sat Mar 12 06:19:45 CST 2011 Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-rc7-mute+ root=/dev/sda1 ro apic=debug BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000097fb0000 (usable) BIOS-e820: 0000000097fb0000 - 0000000097fc8000 (reserved) BIOS-e820: 0000000097fc8000 - 0000000097fe7fb8 (ACPI NVS) BIOS-e820: 0000000097fe7fb8 - 00000000a0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI 2.4 present. DMI: Hewlett-Packard HP Compaq 6515b (GL087PA#AB2)/30C2, BIOS 68YTT Ver. F.05 04/26/2007 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x97fb0 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C0FFF write-protect C1000-C3FFF write-back C4000-C4FFF write-protect C5000-C7FFF write-back C8000-C8FFF write-protect C9000-CBFFF write-back CC000-CCFFF write-protect CD000-CFFFF write-back D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFF0000000 write-back 2 base 0090000000 mask FFF8000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-0000000097fb0000 0000000000 - 0097e00000 page 2M 0097e00000 - 0097fb0000 page 4k kernel direct mapping tables up to 97fb0000 @ 1fffb000-20000000 ACPI: RSDP 00000000000fe0b0 00024 (v02 HP ) ACPI: XSDT 0000000097fc81bc 00064 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 0000000097fc8084 000F4 (v04 HP 0944 00000003 HP 00000001) ACPI Error: 32/64X address mismatch in Pm2ControlBlock: 0x00008800/0x0000000000008100, using 32 (20110112/tbfadt-427) ACPI: DSDT 0000000097fc84a4 11437 (v01 HP SB400 00010000 MSFT 03000001) ACPI: FACS 0000000097fe7d80 00040 ACPI: SLIC 0000000097fc8220 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: EPTH 0000000097fc8398 00038 (v01 HP 0944 00000001 HP 00000001) ACPI: APIC 0000000097fc83d0 00062 (v01 HP 0944 00000001 HP 00000001) ACPI: MCFG 0000000097fc8434 0003C (v01 HP 0944 00000001 HP 00000001) ACPI: TCPA 0000000097fc8470 00032 (v02 HP 0944 00000001 HP 00000001) ACPI: SSDT 0000000097fd98db 00059 (v01 HP HPQNLP 00000001 MSFT 03000001) ACPI: SSDT 0000000097fd9934 00182 (v01 HP PSSTBLID 00000001 HP 00000001) ACPI: Local APIC address 0xfee00000 mapped APIC to ffffffffff5fc000 ( fee00000) [ffffea0000000000-ffffea00021fffff] PMD -> [ffff880095000000-ffff8800971fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x00097fb0 On node 0 totalpages: 622399 DMA zone: 56 pages used for memmap DMA zone: 2 pages reserved DMA zone: 3925 pages, LIFO batch:0 DMA32 zone: 8455 pages used for memmap DMA32 zone: 609961 pages, LIFO batch:31 SB600 revision 0x14 Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 mapped APIC to ffffffffff5fc000 ( fee00000) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 00 Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 0, trig 0, bus 00, IRQ 02, APIC ID 2, APIC INT 02 Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05 Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 ACPI: IRQ9 used by override. Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped IOAPIC to ffffffffff5fb000 (fec00000) nr_irqs_gsi: 40 Allocating PCI resources starting at a0000000 (gap: a0000000:40000000) setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff880097c00000 s72640 r8192 d21568 u1048576 pcpu-alloc: s72640 r8192 d21568 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 613886 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-rc7-mute+ root=/dev/sda1 ro apic=debug PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 41ae000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 2443420k/2490048k available (2775k kernel code, 452k absent, 46176k reserved, 1225k data, 368k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. NR_IRQS:4352 nr_irqs:512 16 Extended CMOS year: 2000 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled allocated 24903680 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Fast TSC calibration failed TSC: Unable to calibrate against PIT TSC: using PMTIMER reference calibration Detected 1593.223 MHz processor. Marking TSC unstable due to TSCs unsynchronized Calibrating delay loop (skipped), value calculated using timer frequency.. 3186.44 BogoMIPS (lpj=1593223) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 Initializing cgroup subsys ns ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys blkio tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine ACPI: Core revision 20110112 Getting VERSION: 80050010 Getting VERSION: 80050010 Getting ID: 0 Getting ID: ff000000 Getting LVT0: 700 Getting LVT1: 400 Setting APIC routing to flat enabled ExtINT on CPU#0 ENABLING IO-APIC IRQs init IO_APIC IRQs IOAPIC[0]: Set routing entry (2-0 -> 0x30 -> IRQ 0 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:1) IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02 Using local APIC timer interrupts. calibrating APIC timer ... ... lapic delta = 1246683 ... PM-Timer delta = 357899 ... PM-Timer result ok ..... delta 1246683 ..... mult: 53552767 ..... calibration result: 199469 ..... CPU clock speed is 1595.0754 MHz. ..... host bus clock speed is 199.0469 MHz. Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f MCE: In-kernel MCE decoding enabled. Booting Node 0, Processors #1 Ok. masked ExtINT on CPU#1 System has AMD C1E enabled Brought up 2 CPUs Total of 2 processors activated (6377.82 BogoMIPS). Switch to broadcast mode on CPU1 Switch to broadcast mode on CPU0 devtmpfs: initialized NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 00000000a0000000 aka 2560M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [c8000000, dfffffff] node 0 link 0: mmio [c0000000, c7ffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [a0000000, bfffffff] bus: [00, ff] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xa0000000-0xfcffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [C171] (off) ACPI: Power Resource [C24C] (on) ACPI: Power Resource [C395] (off) ACPI: Power Resource [C396] (off) ACPI: Power Resource [C397] (off) ACPI: Power Resource [C398] (off) ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [C08B] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xa0000000-0xfedfffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffffffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) pci 0000:00:00.0: [1002:7910] type 0 class 0x000600 pci 0000:00:01.0: [1002:7912] type 1 class 0x000604 pci 0000:00:05.0: [1002:7915] type 1 class 0x000604 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:12.0: [1002:4380] type 0 class 0x000101 pci 0000:00:12.0: reg 10: [io 0x9000-0x9007] pci 0000:00:12.0: reg 14: [io 0x9008-0x900b] pci 0000:00:12.0: reg 18: [io 0x9010-0x9017] pci 0000:00:12.0: reg 1c: [io 0x5018-0x501b] pci 0000:00:12.0: reg 20: [io 0x5020-0x502f] pci 0000:00:12.0: reg 24: [mem 0xcc309000-0xcc3093ff] pci 0000:00:12.0: set SATA to AHCI mode pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03 pci 0000:00:13.0: reg 10: [mem 0xcc301000-0xcc301fff] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03 pci 0000:00:13.1: reg 10: [mem 0xcc302000-0xcc302fff] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03 pci 0000:00:13.2: reg 10: [mem 0xcc303000-0xcc303fff] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03 pci 0000:00:13.3: reg 10: [mem 0xcc304000-0xcc304fff] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03 pci 0000:00:13.4: reg 10: [mem 0xcc305000-0xcc305fff] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03 pci 0000:00:13.5: reg 10: [mem 0xcc306000-0xcc3060ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.5: PME# disabled pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 pci 0000:00:14.0: reg 10: [io 0x8200-0x820f] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101 pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0x5040-0x504f] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 pci 0000:00:14.2: reg 10: [mem 0xcc308000-0xcc30bfff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:00:14.3: [1002:438d] type 0 class 0x000601 pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 PCI: peer root bus 00 res updated from pci conf pci 0000:01:05.0: [1002:791f] type 0 class 0x000300 pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:01:05.0: reg 18: [mem 0xcc100000-0xcc10ffff 64bit] pci 0000:01:05.0: reg 20: [io 0x4000-0x40ff] pci 0000:01:05.0: reg 24: [mem 0xcc200000-0xcc2fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xcc100000-0xcc2fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xc8000000-0xcbffffff] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:02:04.0: [1180:0476] type 2 class 0x000607 pci 0000:02:04.0: reg 10: [mem 0xcc000000-0xcc000fff] pci 0000:02:04.0: supports D1 D2 pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:04.0: PME# disabled pci 0000:00:14.4: PCI bridge to [bus 02-03] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:14.4: bridge window [mem 0xcc000000-0xcc0fffff] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xa0000000-0xfcffffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C08B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C08C._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C0FC._PRT] ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled. SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:14.2: address space collision: [mem 0xcc308000-0xcc30bfff 64bit] conflicts with 0000:00:12.0 [mem 0xcc309000-0xcc3093ff] reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 0000000097fb0000 - 0000000097ffffff printing PIC contents ... PIC IMR: ffff ... PIC IRR: 0003 ... PIC ISR: 0000 ... PIC ELCR: 0e20 printing local APIC contents on CPU#0/0: ... APIC ID: 00000000 (0) ... APIC VERSION: 80050010 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 000000e0 (e0) ... APIC PROCPRI: 00000000 ... APIC LDR: 01000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC TMR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC IRR field: 0000000000000000000000000000000000000000000000000000000000008000 ... APIC ESR: 00000000 ... APIC ICR: 000008fd ... APIC ICR2: 02000000 ... APIC LVTT: 000300ef ... APIC LVTPC: 00000400 ... APIC LVT0: 00010700 ... APIC LVT1: 00000400 ... APIC LVTERR: 000000fe ... APIC TMICT: 00000000 ... APIC TMCCT: 00000000 ... APIC TDCR: 00000003 ... APIC EFEAT: 00010003 ... APIC ECTRL: 00000000 ... APIC EILVT0: 000000f9 number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 00000000 ....... : physical APIC id: 00 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178021 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0021 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 003 0 0 0 0 0 1 1 30 01 003 1 0 0 0 0 1 1 31 02 003 1 0 0 0 0 0 0 32 03 003 0 0 0 0 0 1 1 33 04 003 0 0 0 0 0 1 1 34 05 003 0 0 0 0 0 1 1 35 06 003 0 0 0 0 0 1 1 36 07 003 0 0 0 0 0 1 1 37 08 003 0 0 0 0 0 1 1 38 09 003 0 1 0 1 0 1 1 39 0a 003 0 0 0 0 0 1 1 3A 0b 003 0 0 0 0 0 1 1 3B 0c 003 0 0 0 0 0 1 1 3C 0d 003 0 0 0 0 0 1 1 3D 0e 003 0 0 0 0 0 1 1 3E 0f 003 0 0 0 0 0 1 1 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ2 -> 0:2 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x000e0000-0x000fffff] pnp 00:00: [mem 0x00100000-0xffffffff] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0xffffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [bus 00-ff] pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: [io 0x0000-0x0cf7 window] pnp 00:01: [io 0x0d00-0xffff window] pnp 00:01: [mem 0x000a0000-0x000bffff window] pnp 00:01: [mem 0xa0000000-0xfedfffff window] pnp 00:01: [mem 0xfee01000-0xffffffff window] pnp 00:01: [mem 0x000d0000-0x000dffff window] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:02: [io 0x00f0-0x00ff] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) pnp 00:02: [irq 13] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:03: [io 0x0000-0x000f] pnp 00:03: [io 0x0080-0x008f] pnp 00:03: [io 0x00c0-0x00df] pnp 00:03: [dma 4] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:04: [io 0x0061] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:05: [io 0x0070-0x0071] pnp 00:05: [io 0x0072-0x0073] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) pnp 00:05: [irq 8] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:06: [io 0x0060] pnp 00:06: [io 0x0064] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) pnp 00:06: [irq 1] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) pnp 00:07: [irq 12] pnp 00:07: Plug and Play ACPI device, IDs SYN0131 SYN0100 SYN0002 PNP0f13 (active) pnp 00:08: [io 0x0010-0x001f] pnp 00:08: [io 0x0022-0x0023] pnp 00:08: [io 0x002e-0x002f] pnp 00:08: [io 0x004e-0x004f] pnp 00:08: [io 0x0092] pnp 00:08: [io 0x00b0-0x00b1] pnp 00:08: [io 0x040b] pnp 00:08: [io 0x04d0-0x04d1] pnp 00:08: [io 0x04d6] pnp 00:08: [io 0x0500-0x053f] pnp 00:08: [io 0x0c00-0x0c01] pnp 00:08: [io 0x0c14] pnp 00:08: [io 0x0c50-0x0c51] pnp 00:08: [io 0x0c52] pnp 00:08: [io 0x0c6c] pnp 00:08: [io 0x0c6f] pnp 00:08: [io 0x0cd0-0x0cdf] pnp 00:08: [mem 0xffb00000-0xffbfffff] pnp 00:08: [mem 0xfff00000-0xffffffff] system 00:08: [io 0x040b] has been reserved system 00:08: [io 0x04d0-0x04d1] has been reserved system 00:08: [io 0x04d6] has been reserved system 00:08: [io 0x0500-0x053f] has been reserved system 00:08: [io 0x0c00-0x0c01] has been reserved system 00:08: [io 0x0c14] has been reserved system 00:08: [io 0x0c50-0x0c51] has been reserved system 00:08: [io 0x0c52] has been reserved system 00:08: [io 0x0c6c] has been reserved system 00:08: [io 0x0c6f] has been reserved system 00:08: [io 0x0cd0-0x0cdf] has been reserved system 00:08: [mem 0xffb00000-0xffbfffff] could not be reserved system 00:08: [mem 0xfff00000-0xffffffff] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) IOAPIC[0]: Set routing entry (2-22 -> 0x29 -> IRQ 22 Mode:0 Active:0) pnp 00:09: [irq 22] pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active) pnp 00:0a: [io 0x8000-0x802f] pnp 00:0a: [io 0x8100-0x811f] pnp 00:0a: [mem 0xe0000000-0xefffffff] pnp 00:0a: [mem 0xfec00000-0xfec000ff] pnp 00:0a: [mem 0xfed45000-0xfed8ffff] system 00:0a: [io 0x8000-0x802f] has been reserved system 00:0a: [io 0x8100-0x811f] has been reserved system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved system 00:0a: [mem 0xfec00000-0xfec000ff] could not be reserved system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [mem 0x000cd400-0x000cffff] pnp 00:0b: [mem 0x00000000-0x07ffffff] pnp 00:0b: [mem 0xfee00000-0xfee00fff] system 00:0b: [mem 0x000cd400-0x000cffff] has been reserved system 00:0b: [mem 0x00000000-0x07ffffff] could not be reserved system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered Switching to clocksource acpi_pm pci 0000:00:14.4: BAR 9: assigned [mem 0xa0000000-0xa3ffffff pref] pci 0000:00:14.2: BAR 0: assigned [mem 0xa4000000-0xa4003fff 64bit] pci 0000:00:14.2: BAR 0: set to [mem 0xa4000000-0xa4003fff 64bit] (PCI address [0xa4000000-0xa4003fff]) pci 0000:00:14.4: BAR 7: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xcc100000-0xcc2fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xc8000000-0xcbffffff] pci 0000:00:05.0: bridge window [mem pref disabled] pci 0000:02:04.0: BAR 9: assigned [mem 0xa0000000-0xa3ffffff pref] pci 0000:02:04.0: BAR 10: assigned [mem 0xa8000000-0xabffffff] pci 0000:02:04.0: BAR 7: assigned [io 0x1000-0x10ff] pci 0000:02:04.0: BAR 8: assigned [io 0x1400-0x14ff] pci 0000:02:04.0: CardBus bridge to [bus 03-06] pci 0000:02:04.0: bridge window [io 0x1000-0x10ff] pci 0000:02:04.0: bridge window [io 0x1400-0x14ff] pci 0000:02:04.0: bridge window [mem 0xa0000000-0xa3ffffff pref] pci 0000:02:04.0: bridge window [mem 0xa8000000-0xabffffff] pci 0000:00:14.4: PCI bridge to [bus 02-03] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] pci 0000:00:14.4: bridge window [mem 0xcc000000-0xcc0fffff] pci 0000:00:14.4: bridge window [mem 0xa0000000-0xa3ffffff pref] pci 0000:00:05.0: setting latency timer to 64 IOAPIC[0]: Set routing entry (2-20 -> 0x41 -> IRQ 20 Mode:1 Active:1) pci 0000:02:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci_bus 0000:00: resource 4 [io 0x0000-0xffff] pci_bus 0000:00: resource 5 [mem 0xa0000000-0xfcffffffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] pci_bus 0000:01: resource 1 [mem 0xcc100000-0xcc2fffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff] pci_bus 0000:20: resource 1 [mem 0xc8000000-0xcbffffff] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xcc000000-0xcc0fffff] pci_bus 0000:02: resource 2 [mem 0xa0000000-0xa3ffffff pref] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] pci_bus 0000:02: resource 5 [mem 0xa0000000-0xfcffffffff] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:03: resource 0 [io 0x1000-0x10ff] pci_bus 0000:03: resource 1 [io 0x1400-0x14ff] pci_bus 0000:03: resource 2 [mem 0xa0000000-0xa3ffffff pref] pci_bus 0000:03: resource 3 [mem 0xa8000000-0xabffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:01:05.0: Boot video device PCI: CLS 64 bytes, default 64 msgmni has been set to 4772 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) ACPI: AC Adapter [C1EB] (on-line) input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [C28D] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [C265] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: Fan [C399] (off) ACPI: Fan [C39A] (off) ACPI: Fan [C39B] (off) ACPI: Fan [C39C] (off) ACPI: acpi_idle registered with cpuidle ACPI: processor limited to max C-state 1 thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ1] (45 C) ACPI: Battery Slot [C1ED] (battery absent) ACPI: Battery Slot [C1EC] (battery absent) ahci 0000:00:12.0: version 3.0 IOAPIC[0]: Set routing entry (2-16 -> 0x49 -> IRQ 16 Mode:1 Active:1) ahci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xcc309000 port 0xcc309100 irq 16 ata2: DUMMY ata3: DUMMY ata4: DUMMY pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5040 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5048 irq 15 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver IOAPIC[0]: Set routing entry (2-23 -> 0x51 -> IRQ 23 Mode:1 Active:1) ehci_hcd 0000:00:13.5: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 23, io mem 0xcc306000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 23, io mem 0xcc301000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected IOAPIC[0]: Set routing entry (2-17 -> 0x59 -> IRQ 17 Mode:1 Active:1) ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xcc302000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:13.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 17, io mem 0xcc303000 ata5.00: ATAPI: TSSTcorpCDW/DVD TS-L462D, HH08, max MWDMA2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xcc304000 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: PCI INT C -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 17, io mem 0xcc305000 ata5.00: configured for MWDMA2 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected i8042: PNP: PS/2 Controller [PNP0303:C249,PNP0f13:C24A] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram EDAC MC: Ver: 2.1.0 Mar 11 2011 EDAC amd64_edac: v3.3.0 EDAC amd64: DRAM ECC disabled. EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) cpuidle: using governor ladder Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 rtc_cmos 00:05: setting system clock to 2011-03-11 22:53:54 UTC (1299884034) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 scsi 4:0:0:0: CD-ROM TSSTcorp CDW/DVD TS-L462D HH08 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg1 type 5 sda: sda1 sda2 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext2 filesystem) readonly on device 8:1. devtmpfs: mounted Freeing unused kernel memory: 368k freed udev[709]: starting version 166 Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0 serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4 EXT4-fs (sda1): re-mounted. Opts: (null) EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [-- Attachment #3: lspci --] [-- Type: text/plain, Size: 19414 bytes --] 00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910] 00: 02 10 10 79 06 00 20 22 00 00 00 06 00 40 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 c4 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 42 20 05 00 50: 3c 10 c2 30 00 00 00 00 00 00 00 00 00 00 00 00 60: 88 00 00 00 30 00 c0 07 00 02 20 00 d8 f8 01 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 40 42 00 00 95 00 00 03 20 11 10 00 03 26 00 10 90: 00 00 00 98 40 c3 40 e3 00 c0 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 07 01 00 00 49 01 10 07 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 08 00 94 01 60 20 11 11 d0 00 00 00 d0: 25 05 65 00 02 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 e0 e0 00 00 7f 00 00 00 00 00 00 00 f0: 00 00 00 00 00 80 80 00 00 00 00 00 00 00 00 00 00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] 00: 02 10 12 79 07 00 30 02 00 00 04 06 00 40 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 41 41 20 02 20: 10 cc 20 cc 01 c0 f1 c7 00 00 00 00 00 00 00 00 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 0c 00 40: 00 00 00 00 08 b0 03 a8 00 00 00 00 3c 10 c2 30 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 0d 00 00 00 3c 10 c2 30 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:05.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1) [1002:7915] 00: 02 10 15 79 07 00 10 00 00 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 20 20 00 21 31 00 00 20: 00 c8 f0 cb f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 04 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 03 c8 00 00 00 00 10 80 41 01 20 80 00 00 60: 10 08 00 00 11 0c 10 f7 00 00 01 11 00 00 00 00 70: c0 03 00 00 00 00 01 00 00 00 00 00 00 00 00 00 80: 05 b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 0d b8 00 00 3c 10 c2 30 08 00 03 a8 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: a5 00 00 00 02 01 00 04 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] 00: 02 10 80 43 07 00 30 02 00 01 06 01 10 40 00 00 10: 01 90 00 00 09 90 00 00 11 90 00 00 19 50 00 00 20: 21 50 00 00 00 90 30 cc 00 00 00 00 02 10 80 43 30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00 40: 10 00 8e 02 01 00 10 00 01 00 00 00 00 00 00 00 50: 05 00 84 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 12 00 10 00 0f 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 06 00 00 2c d6 01 b4 00 d6 01 b4 00 90: d6 01 b4 00 d6 01 b4 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 78 00 00 00 00 00 00 00 78 00 00 b0: 00 00 00 00 00 78 00 00 00 00 00 00 00 78 00 00 c0: 00 20 00 00 80 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] 00: 02 10 87 43 07 00 a0 02 00 10 03 0c 10 40 80 00 10: 00 10 30 cc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00 40: 80 1f 1a 01 0a 84 b7 18 07 35 00 00 00 00 00 00 50: 00 9d 00 00 00 00 00 00 ff ff ff ff ff 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 ff 00 00 80 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] 00: 02 10 88 43 07 00 a0 02 00 10 03 0c 10 40 00 00 10: 00 20 30 cc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] 00: 02 10 89 43 07 00 a0 02 00 10 03 0c 10 40 00 00 10: 00 30 30 cc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] 00: 02 10 8a 43 07 00 a0 02 00 10 03 0c 10 40 00 00 10: 00 40 30 cc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] 00: 02 10 8b 43 07 00 a0 02 00 10 03 0c 10 40 00 00 10: 00 50 30 cc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] 00: 02 10 86 43 17 00 b0 02 00 20 03 0c 10 40 00 00 10: 00 60 30 cc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 c0 00 00 00 00 00 00 00 0b 04 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 40 00 0e 08 00 00 00 00 00 00 00 00 00 00 00 00 60: 20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 00 00 00 00 08 c0 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 e4 02 7e 00 00 40 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 0a 00 e0 20 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14) 00: 02 10 85 43 03 00 30 02 14 00 05 0c 00 00 80 00 10: 01 82 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00 40: d4 33 00 04 00 00 00 00 0f ff 00 00 00 00 00 00 50: f0 0f 00 00 00 00 00 00 11 82 f0 0f 00 00 00 00 60: 01 00 25 00 bf 39 de 03 3f d3 00 00 20 00 00 00 70: 00 01 00 00 08 00 c0 fe ff 4b 00 00 00 00 f0 0f 80: 50 01 c2 3e 00 00 00 00 00 00 00 00 8c 00 00 80 90: 01 82 00 00 f9 ce bf 00 00 00 00 00 00 00 00 00 a0: 00 00 ff ff ff ff 78 09 13 cc 13 02 16 7b 20 00 b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0b 0f 39 c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: d8 0c 00 00 00 00 44 00 00 00 00 00 fa 00 10 01 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] 00: 02 10 8c 43 05 00 20 02 00 82 01 01 10 40 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: 41 50 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00 40: 5d 20 00 00 ff 20 00 00 00 01 04 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 40 00 10 2c 01 07 01 00 00 00 ff ff 0f 00 70: 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] 00: 02 10 83 43 06 00 10 04 00 00 03 04 10 40 00 00 10: 04 00 00 a4 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00 40: 00 00 00 00 01 00 00 00 00 00 00 00 01 00 00 00 50: 01 00 42 c8 00 00 00 00 00 00 00 00 00 00 00 00 60: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] 00: 02 10 8d 43 0f 00 20 02 00 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 04 00 00 00 bc 0d c3 ff 1b ff 4e 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 0a 00 00 0f 00 00 00 f0 ff ff ff 70: 67 45 23 01 00 00 00 00 01 00 00 00 05 00 00 00 80: 08 00 03 a8 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 20 30 b8 ff 00 00 00 00 00 00 00 00 00 00 00 00 b0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] 00: 02 10 84 43 27 00 a0 02 00 01 04 06 00 40 81 00 10: 00 00 00 00 00 00 00 00 00 02 03 40 10 10 80 22 20: 00 cc 00 cc 00 a0 f0 a3 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 00 40: 26 00 3c ff 00 00 00 00 0c 01 3c d1 03 02 00 00 50: 01 08 00 00 08 00 03 a8 00 00 00 00 85 00 ff ff 60: ca 0e 17 00 ba 98 10 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 02 06 e0: 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 60: 00 00 01 00 e4 00 00 00 20 c8 2f 0f 0c 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 08 00 01 21 20 a8 11 11 22 05 35 80 02 00 00 00 90: 78 01 70 01 00 00 ff 00 07 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 03 00 00 00 00 00 9f 00 00 00 00 00 01 00 00 00 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 03 00 e0 00 80 ff ef 00 03 00 f0 00 00 ff ff 00 a0: 03 00 c8 00 00 ff df 00 03 00 c0 00 80 ff c7 00 b0: 03 0a 00 00 00 0b 00 00 03 00 a0 00 00 ff bf 00 c0: 00 00 00 00 00 00 00 00 13 10 00 00 00 f0 0f 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 03 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 00 80 00 01 00 90 00 00 00 00 00 00 00 00 00 50: 01 00 00 00 01 00 40 00 00 00 00 00 00 00 00 00 60: e0 3f 08 00 00 00 00 00 e0 3f 38 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00 80: 01 05 00 00 00 00 00 00 24 c2 aa 5d 20 13 12 08 90: 20 04 01 00 6a 80 11 a7 38 00 00 80 00 00 00 00 a0: ff 06 00 5d 00 00 00 00 00 00 00 00 00 00 00 00 b0: cd 22 c2 d5 16 00 00 00 4b 40 12 02 95 68 be 81 c0: 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 3d 00 0c 0c 22 53 a2 7e 61 88 0a 02 b6 0b 10 80 e0: 63 40 08 ec 03 1a 99 2c 99 40 00 83 b8 01 4c 88 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] 00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 40: ff 3b 04 00 40 00 10 0a 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 80 20 51 fd 60: 37 00 00 00 01 77 1f 00 00 00 00 00 00 00 00 00 70: 11 01 32 51 21 40 30 50 00 2a 00 08 1b 21 00 00 80: 31 37 07 33 13 31 13 31 00 00 00 00 00 00 00 00 90: 00 00 00 00 d7 20 00 00 60 03 0c 44 00 00 00 00 a0: 9a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 01 a7 0d 00 00 00 00 09 25 26 26 00 e0: 00 00 00 00 20 0e 5c 00 01 17 00 00 00 00 00 00 f0: 0f 00 10 00 00 00 00 00 00 00 00 00 82 0f 04 00 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690M [Radeon X1200 Series] [1002:791f] 00: 02 10 1f 79 07 00 10 00 00 00 00 03 10 40 00 00 10: 0c 00 00 c0 00 00 00 00 04 00 10 cc 00 00 00 00 20: 01 40 00 00 00 00 20 cc 00 00 00 00 3c 10 c2 30 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30 50: 01 80 02 06 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02:04.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b6) 00: 80 11 76 04 07 00 10 02 b6 00 07 06 00 40 82 00 10: 00 00 00 cc dc 00 00 02 02 03 06 b0 00 00 00 a0 20: 00 f0 ff a3 00 00 00 a8 00 f0 ff ab 00 10 00 00 30: fc 10 00 00 00 14 00 00 fc 14 00 00 0a 01 80 07 40: 3c 10 c2 30 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 a0 30 00 00 00 00 63 04 63 04 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 bf 00 30 00 00 00 00 00 00 c0: 3c 10 c2 30 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 0a fe e0: 00 40 c0 24 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [-- Attachment #4: Type: text/plain, Size: 3938 bytes --] Thanks! On 2011-03-11 22:28:54 +0800, Andreas Herrmann wrote: > On Fri, Mar 11, 2011 at 08:47:01PM +0800, Wang Lei wrote: >> >> On 2011-03-11 19:38:39 +0800, Andreas wrote: >> > >> > Can you please try to boot -rc7 with kernel parameter acpi_skip_timer_override >> > and send the same output (dmesg again also with apic=debug and lspci -nnxxxx) >> > >> > >> > Thanks, >> > >> > Andreas >> > >> > PS: My assumption is that the patch in -rc7 leads to usage of IO-APIC >> > pin2 for timer interrupt (potentially I have broken chipset >> > revision determination for some SB600.) > >> Hi Andreas, >> >> I did what you said, appended acpi_skip_timer_override when boot -rc7. >> Now the fans work OK. I don't know why and I don't think this is the >> final solution. If not, I'll wait. > > Ok, the problem is that all SB[6-8]00 chipsets use the same PCI device ID. > To differntiate the versions I need to check the revision ID. > > With my patch I removed some special treatment for SB600. > (See http://support.amd.com/us/Embedded_TechDocs/46155_sb600_rrg_pub_3.03.pdf) > > Revision ID/Class Code- R - 32 bits - [PCI_Reg: 08h] > Field Name Bits Default Description > RevisionID 7:0 11h / This field reflects the ASIC revision. > 12h / 11h : For ASIC revision A11 > 13h 12h : For ASIC revision A12 > 13h : For ASIC revision A13 > For ASIC revisions after A13, by default this field will read 13h > still. However, if SMBUS PCI config 70h bit 8 is set to 1, a > hidden revision ID can be read from this field. > > The old code temporarily cleared bit 8 in PCI config 70h and received > 13h as revision for device 14.0 on your system (the "hidden revision > ID" shown in your lspci output is 0x14 and that is what the new code > is using). For SB700/SB800 PCI config 70h is reserved ("software > should not write to it") and that is why I wanted to avoid accesses to > that register. (See SB700 documentation > http://support.amd.com/us/Embedded_TechDocs/43009_sb7xx_rrg_pub_1.00.pdf) > > So the right thing to do is to correct the check for SB600 to cover > all SB600 revisions w/o depending on the setting of bit 8 in PCI > config 70h. > > Attached patch should achieve this. > Can you please test this patch on top of -rc7? > > > Thanks a lot, > > Andreas > --- > From 8453f3aef2e2b89ba30877998dcbfc06f475e253 Mon Sep 17 00:00:00 2001 > From: Andreas Herrmann <andreas.herrmann3@amd.com> > Date: Fri, 11 Mar 2011 15:16:47 +0100 > Subject: [PATCH] x86, quirk: Fix SB600 revision check > > Commit 7f74f8f28a2bd9db9404f7d364e2097a0c42cc12 > (x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systems) > introduced a regression. It removed some SB600 specific code > to determine the revision ID without adapting a corresponding > revision ID check for SB600. > > See this mail thread > http://marc.info/?l=linux-kernel&m=129980296006380&w=2 > > This patch adapts the corresponding check to cover all SB600 > revisions. > > Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> > --- > arch/x86/kernel/early-quirks.c | 7 ++++++- > 1 files changed, 6 insertions(+), 1 deletions(-) > > diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c > index 9efbdcc..3755ef4 100644 > --- a/arch/x86/kernel/early-quirks.c > +++ b/arch/x86/kernel/early-quirks.c > @@ -159,7 +159,12 @@ static void __init ati_bugs_contd(int num, int slot, int func) > if (rev >= 0x40) > acpi_fix_pin2_polarity = 1; > > - if (rev > 0x13) > + /* > + * SB600: revisions 0x11, 0x12, 0x13, 0x14, ... > + * SB700: revisions 0x39, 0x3a, ... > + * SB800: revisions 0x40, 0x41, ... > + */ > + if (rev >= 0x39) > return; > > if (acpi_use_timer_override) -- Regards, Lei ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2011-03-11 23:02 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <4d774c85.20f98e0a.2695.73ed@mx.google.com>
[not found] ` <201103092125.43950.rjw@sisk.pl>
[not found] ` <4d780a2f.231a8f0a.3b01.ffffa228@mx.google.com>
2011-03-10 0:06 ` [BUG] Fans keep running, first found since v2.6.38-rc7 Rafael J. Wysocki
2011-03-10 11:59 ` Wang Lei
2011-03-11 0:04 ` Wang Lei
2011-03-11 7:41 ` Andreas Herrmann
2011-03-11 10:47 ` Wang Lei
2011-03-11 11:38 ` Andreas Herrmann
2011-03-11 12:47 ` Wang Lei
2011-03-11 14:28 ` Andreas Herrmann
2011-03-11 23:02 ` Wang Lei
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox