From: Borislav Petkov <bp@alien8.de>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: Dave Jones <davej@redhat.com>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
"Zhang, Rui" <rui.zhang@intel.com>,
"Lu, Aaron" <aaron.lu@intel.com>,
lkml <linux-kernel@vger.kernel.org>,
"x86@kernel.org" <x86@kernel.org>,
Linux PCI <linux-pci@vger.kernel.org>,
ACPI Devel Maling List <linux-acpi@vger.kernel.org>,
Yinghai Lu <yinghai@kernel.org>, "H. Peter Anvin" <hpa@zytor.com>,
Stephane Eranian <eranian@google.com>,
"Yan, Zheng Z" <zheng.z.yan@intel.com>
Subject: Re: Info: mapping multiple BARs. Your kernel is fine.
Date: Thu, 17 Apr 2014 12:45:33 +0200 [thread overview]
Message-ID: <20140417104533.GB8215@pd.tnic> (raw)
In-Reply-To: <20140416225600.GA23781@google.com>
Hi Bjorn,
thanks for the patch, a couple of notes below:
On Wed, Apr 16, 2014 at 04:56:00PM -0600, Bjorn Helgaas wrote:
> PNP: Work around Haswell BIOS defect in MCH area reporting
>
> From: Bjorn Helgaas <bhelgaas@google.com>
>
> Work around a Haswell BIOS defect that causes part of the MCH area to be
> unreported.
Yep, what Stephane said, this is not HSW only.
> MCHBAR is not an architected PCI BAR, so MCH space is usually reported as a
> PNP0C02 resource. The MCH space was 16KB prior to Haswell, but it is 32KB
> in Haswell. Some Haswell BIOSes still report a PNP0C02 resource that is
> only 16KB, which means the rest of the MCH space is consumed but
> unreported.
>
> This can cause resource map sanity check warnings or (theoretically) a
> device conflict if we assigned the unreported space to another device.
>
> The Intel perf event uncore driver tripped over this when it claimed the
> MCH region:
>
> resource map sanity check conflict: 0xfed10000 0xfed15fff 0xfed10000 0xfed13fff pnp 00:01
> Info: mapping multiple BARs. Your kernel is fine.
>
> To prevent this, if we find a PNP0C02 resource that covers part of the MCH
> space, extend it to cover the entire space.
>
> Link: http://lkml.kernel.org/r/20140224162400.GE16457@pd.tnic
> Reported-by: Borislav Petkov <bp@alien8.de>
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> ---
> drivers/pnp/quirks.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 55 insertions(+)
>
> diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c
> index 258fef272ea7..8402088d4145 100644
> --- a/drivers/pnp/quirks.c
> +++ b/drivers/pnp/quirks.c
> @@ -334,6 +334,60 @@ static void quirk_amd_mmconfig_area(struct pnp_dev *dev)
> }
> #endif
>
> +static void quirk_intel_haswell_mch(struct pnp_dev *dev)
> +{
> + struct pci_dev *host;
> + u32 addr_lo, addr_hi;
> + struct pci_bus_region region;
> + struct resource mch;
> + struct pnp_resource *pnp_res;
> + struct resource *res;
> +
> + host = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0c00, NULL);
And because it is not HSW only, this PCI device ID doesn't match on my
IVB system. On mine the hostbridge is
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
Subsystem: Lenovo Device 21fa
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: ivb_uncore
00: 86 80 54 01 06 00 90 20 09 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 fa 21
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
and from looking at Dave's, it is the same one, so PCI device ID is
0x154.
With that changed to
host = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0154, NULL);
and a bit of debugging code, it says now:
[ 0.235739] quirk_intel_haswell_mch: entry
[ 0.235800] quirk_intel_haswell_mch: got host: 0x0
[ 0.235860] quirk_intel_haswell_mch: mch: [mem 0xfed10000-0xfed17fff]
[ 0.235930] quirk_intel_haswell_mch: res: [mem 0xfed10000-0xfed13fff]
[ 0.235990] pnp 00:01: [Firmware Bug]: [mem 0xfed10000-0xfed13fff] covers only part of Intel Haswell MCH; extending to [mem 0xfed10000-0xfed17fff]
So you probably want to have a list of hostbridge pci ids in the quirk
or so.
Thanks.
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
next prev parent reply other threads:[~2014-04-17 10:45 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20140224162400.GE16457@pd.tnic>
2014-03-15 14:15 ` Info: mapping multiple BARs. Your kernel is fine Rafael J. Wysocki
2014-03-16 11:55 ` Borislav Petkov
2014-03-16 13:08 ` Stephane Eranian
2014-03-17 0:09 ` Rafael J. Wysocki
2014-03-17 0:23 ` Rafael J. Wysocki
2014-03-20 2:24 ` Aaron Lu
2014-03-20 2:29 ` Stephane Eranian
2014-03-20 3:03 ` Zhang, Rui
2014-03-20 3:34 ` Stephane Eranian
2014-03-20 7:53 ` Zhang, Rui
2014-03-20 8:16 ` Yan, Zheng
2014-03-20 13:43 ` Zhang Rui
2014-03-20 16:03 ` Stephane Eranian
2014-03-20 13:35 ` Zhang Rui
2014-03-20 12:29 ` Rafael J. Wysocki
2014-03-20 16:45 ` Bjorn Helgaas
2014-03-20 20:55 ` Rafael J. Wysocki
2014-03-20 20:48 ` Bjorn Helgaas
2014-04-16 19:04 ` Borislav Petkov
2014-04-16 20:24 ` Zhang, Rui
2014-04-16 20:31 ` Bjorn Helgaas
2014-04-16 22:31 ` Dave Jones
2014-04-16 22:56 ` Bjorn Helgaas
2014-04-17 0:18 ` Dave Jones
2014-04-17 10:45 ` Borislav Petkov [this message]
2014-04-17 18:26 ` Bjorn Helgaas
2014-04-17 19:48 ` Borislav Petkov
2014-04-17 20:10 ` Bjorn Helgaas
2014-04-17 19:52 ` Dave Jones
2014-04-17 20:01 ` Borislav Petkov
2014-04-17 20:03 ` Dave Jones
2014-04-17 20:53 ` Dave Jones
2014-04-17 21:01 ` Borislav Petkov
[not found] ` <20140417213027.GA22412@redhat.com>
2014-04-18 10:38 ` Borislav Petkov
2014-04-16 23:08 ` Stephane Eranian
2014-04-16 23:11 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140417104533.GB8215@pd.tnic \
--to=bp@alien8.de \
--cc=aaron.lu@intel.com \
--cc=bhelgaas@google.com \
--cc=davej@redhat.com \
--cc=eranian@google.com \
--cc=hpa@zytor.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=rui.zhang@intel.com \
--cc=x86@kernel.org \
--cc=yinghai@kernel.org \
--cc=zheng.z.yan@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox