From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heikki Krogerus Subject: Re: [PATCHv2 2/4] ACPI / LPSS: custom power domain for LPSS Date: Fri, 23 May 2014 16:02:52 +0300 Message-ID: <20140523130252.GH18308@xps8300> References: <1400161226-24067-1-git-send-email-heikki.krogerus@linux.intel.com> <1484699.LPqrzmlevB@vostro.rjw.lan> <20140523123052.GA18308@xps8300> <13101534.gKoyQa16hJ@vostro.rjw.lan> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mga14.intel.com ([192.55.52.115]:49687 "EHLO mga14.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751781AbaEWNC5 (ORCPT ); Fri, 23 May 2014 09:02:57 -0400 Content-Disposition: inline In-Reply-To: <13101534.gKoyQa16hJ@vostro.rjw.lan> Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: "Rafael J. Wysocki" Cc: Mike Turquette , Jin Yao , Li Aubrey , Mika Westerberg , Andy Shevchenko , linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org On Fri, May 23, 2014 at 03:10:08PM +0200, Rafael J. Wysocki wrote: > On Friday, May 23, 2014 03:30:53 PM Heikki Krogerus wrote: > > On Thu, May 22, 2014 at 01:28:16AM +0200, Rafael J. Wysocki wrote: > > > On Wednesday, May 21, 2014 01:52:58 PM Heikki Krogerus wrote: > > > > On Wed, May 21, 2014 at 01:01:31PM +0200, Rafael J. Wysocki wrote: > > > > > On Wednesday, May 21, 2014 01:05:11 PM Heikki Krogerus wrote: > > > > > > On Tue, May 20, 2014 at 11:33:09PM +0200, Rafael J. Wysocki wrote: > > > > > > > First, is the 10 ms sleep really necessary? I'd expect the AML to take care of > > > > > > > such delays (this is not a PCI device formally). > > > > > > > > > > > > Unfortunately that is not the case. There is nothing in the AML for > > > > > > this. Mika, correct me if I'm wrong. > > > > > > > > > > > > > And because this is not a PCI device formally, why is the comment talking about > > > > > > > the PCI spec? Why is PCI relevant in any way here? > > > > > > > > > > > > Under the hood the devices are still PCI devices, even if they > > > > > > formally aren't. Maybe I should point that out in the comment.. > > > > > > > > > > > > We put the sleep there because without it there was no guarantee if > > > > > > the device was properly resumed by the time the drivers resume hooks > > > > > > were called. The symptom in case of a failure was simply that the > > > > > > registers could not be written, which leads into timeouts at least in > > > > > > case of the I2C and UART and making them unusable until the next > > > > > > suspend followed by resume. > > > > > > > > > > OK, so the msleep() is functionally necessary. Instead of talking about the > > > > > PCI in the comment, which will make a casual reader think "What the heck?", > > > > > please say something like "the delay is necessary for the subsequent register > > > > > writes to succeed on ". > > > > > > > > OK. > > > > > > So I have one more concern. Namely, async suspend is not enabled for the LPSS > > > devices, so the delays will accumulate for them and that may become a big deal > > > at one point. > > > > > > This may be addressed either (1) by enabling async suspend for them or, which would > > > be more complicated, by doing the msleep() once for the whole LPSS in .resume_early() > > > and restoring the register values in .resume() without delaying. > > > > > > For (1) I have the following untested patch (on top of my bleeding-edge branch, but > > > it should apply to the mainline too if I haven't overlooked anything). Can you > > > please try it on boxes with LPSS and see if it doesn't break suspend/resume on them? > > > > Done, and there were no problems. I tested it with HSW, BYT and also BDW. > > Great, thanks! > > So I'll add a changelog and I'm going to push it along with your series. > > Are you going to update the $subject patch, or send an update on top of > linux-next? I'll send an update right away. On top of explaining the problem if left without the msleep(10), I still left the comment about the PCI spec plus a mention that all LPSS devices are actually PCI devices. I hope that's OK with you. It just felt like we need to point out that the 10ms is not pulled out of the hat. -- heikki