From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: Prarit Bhargava <prarit@redhat.com>
Cc: linux-kernel@vger.kernel.org,
Robert Moore <robert.moore@intel.com>,
Lv Zheng <lv.zheng@intel.com>,
"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
Len Brown <lenb@kernel.org>,
linux-acpi@vger.kernel.org, devel@acpica.org
Subject: Re: [PATCH] acpi/acpica: fix Thunderbolt hotplug
Date: Fri, 15 Apr 2016 10:39:50 +0300 [thread overview]
Message-ID: <20160415073950.GC1714@lahna.fi.intel.com> (raw)
In-Reply-To: <1459291540-8746-1-git-send-email-prarit@redhat.com>
Bob, Rafael, any comments about this?
This seems to solve a real issue with Thunderbolt hotplug on Dell XPS
laptops. I do not know ACPICA that well to tell if this is 100% correct
fix but many reporters say it fixes the problem they are facing:
https://bugzilla.kernel.org/show_bug.cgi?id=115121
On Tue, Mar 29, 2016 at 06:45:40PM -0400, Prarit Bhargava wrote:
> The following hung task trace is seen when hotplugging
> an ethernet dongle in a Thunderbolt port on Linux.
>
> INFO: task kworker/0:4:1468 blocked for more than 120 seconds.
> Tainted: G W 4.6.0-rc1+ #1
> "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> kworker/0:4 D ffff8802a265ba38 13344 1468 2 0x00000000
> Workqueue: kacpid acpi_os_execute_deferred
> ffff8802a265ba38 ffff8802a265ba00 ffffffff81130200 ffffffff81e0d580
> ffff88029e5eb340 ffff8802a265c000 ffff88029d69d000 ffff88029e5eb340
> ffffffff818c1b8d ffff8802b64e8758 ffff8802a265ba50 ffffffff818bdfcc
> Call Trace:
> [<ffffffff81130200>] ? test_callback+0x10/0x30
> [<ffffffff818c1b8d>] ? __down_timeout+0x5d/0xd0
> [<ffffffff818bdfcc>] schedule+0x3c/0x90
> [<ffffffff818c2d60>] schedule_timeout+0x210/0x360
> [<ffffffff8103fc89>] ? sched_clock+0x9/0x10
> [<ffffffff810ee51c>] ? local_clock+0x1c/0x20
> [<ffffffff81110c16>] ? mark_held_locks+0x76/0xa0
> [<ffffffff818c3cfc>] ? _raw_spin_unlock_irq+0x2c/0x40
> [<ffffffff818c1b8d>] ? __down_timeout+0x5d/0xd0
> [<ffffffff81110d35>] ? trace_hardirqs_on_caller+0xf5/0x1b0
> [<ffffffff818c1b8d>] ? __down_timeout+0x5d/0xd0
> [<ffffffff818c1bac>] __down_timeout+0x7c/0xd0
> [<ffffffff818c44b2>] ? _raw_spin_lock_irqsave+0x82/0x90
> [<ffffffff8110b87c>] down_timeout+0x4c/0x60
> [<ffffffff814e3a9c>] acpi_os_wait_semaphore+0xaa/0x16a
> [<ffffffff81510f37>] acpi_ex_system_wait_mutex+0x81/0xfa
> [<ffffffff814f8796>] acpi_ds_begin_method_execution+0x25a/0x373
> [<ffffffff814f8cea>] acpi_ds_call_control_method+0x107/0x2e0
> [<ffffffff8151ed60>] acpi_ps_parse_aml+0x177/0x495
> [<ffffffff8151fa46>] acpi_ps_execute_method+0x1f7/0x2b9
> [<ffffffff81516c9a>] acpi_ns_evaluate+0x2ee/0x435
> [<ffffffff814ff84a>] acpi_ev_asynch_execute_gpe_method+0xbd/0x159
> [<ffffffff814e2a69>] acpi_os_execute_deferred+0x17/0x23
> [<ffffffff810d1fc2>] process_one_work+0x242/0x700
> [<ffffffff810d1f3a>] ? process_one_work+0x1ba/0x700
> [<ffffffff810d24ce>] worker_thread+0x4e/0x490
> [<ffffffff810d2480>] ? process_one_work+0x700/0x700
> [<ffffffff810d2480>] ? process_one_work+0x700/0x700
> [<ffffffff810d98b1>] kthread+0x101/0x120
> [<ffffffff81110d35>] ? trace_hardirqs_on_caller+0xf5/0x1b0
> [<ffffffff818c4832>] ret_from_fork+0x22/0x50
> [<ffffffff810d97b0>] ? kthread_create_on_node+0x250/0x250
> 2 locks held by kworker/0:4/1468:
> #0: ("kacpid"){.+.+.+}, at: [<ffffffff810d1f3a>] process_one_work+0x1ba/0x700
> #1: ((&dpc->work)){+.+.+.}, at: [<ffffffff810d1f3a>] process_one_work+0x1ba/0x700
>
> The issue appears to be that the kworker thread attempts to acquire the
> _E42 method's mutex twice when executing acpi_ps_execute_method() and
> recursing through the entry method.
>
> The current code does take the possiblity of this recursion into account,
> however, it is only for the case where the walk_state has been populated.
>
> This can be fixed by setting the thread id in the !walk_state case to
> allow for recursion.
>
> Cc: Robert Moore <robert.moore@intel.com>
> Cc: Lv Zheng <lv.zheng@intel.com>
> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
> Cc: Len Brown <lenb@kernel.org>
> Cc: linux-acpi@vger.kernel.org
> Cc: devel@acpica.org
> Signed-off-by: Prarit Bhargava <prarit@redhat.com>
> ---
> drivers/acpi/acpica/dsmethod.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/acpi/acpica/dsmethod.c b/drivers/acpi/acpica/dsmethod.c
> index 1982310..93799db 100644
> --- a/drivers/acpi/acpica/dsmethod.c
> +++ b/drivers/acpi/acpica/dsmethod.c
> @@ -428,6 +428,9 @@ acpi_ds_begin_method_execution(struct acpi_namespace_node *method_node,
> obj_desc->method.mutex->mutex.
> original_sync_level =
> obj_desc->method.mutex->mutex.sync_level;
> +
> + obj_desc->method.mutex->mutex.thread_id =
> + acpi_os_get_thread_id();
> }
> }
>
> --
> 1.7.9.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-04-15 7:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-29 22:45 [PATCH] acpi/acpica: fix Thunderbolt hotplug Prarit Bhargava
2016-04-15 7:39 ` Mika Westerberg [this message]
2016-04-15 16:21 ` Moore, Robert
2016-04-15 17:03 ` Prarit Bhargava
2016-04-15 17:05 ` Moore, Robert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160415073950.GC1714@lahna.fi.intel.com \
--to=mika.westerberg@linux.intel.com \
--cc=devel@acpica.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lv.zheng@intel.com \
--cc=prarit@redhat.com \
--cc=rafael.j.wysocki@intel.com \
--cc=robert.moore@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox