From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: Re: [PATCH v2 2/4] mfd: lpc_ich: Do not create iTCO watchdog when WDAT table exists Date: Tue, 27 Sep 2016 20:41:14 +0100 Message-ID: <20160927194114.GL21388@dell> References: <20160920123054.195021-1-mika.westerberg@linux.intel.com> <20160920123054.195021-3-mika.westerberg@linux.intel.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit Return-path: Received: from mail-pa0-f41.google.com ([209.85.220.41]:32842 "EHLO mail-pa0-f41.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934952AbcI0TjF (ORCPT ); Tue, 27 Sep 2016 15:39:05 -0400 Received: by mail-pa0-f41.google.com with SMTP id cd13so5263420pac.0 for ; Tue, 27 Sep 2016 12:39:05 -0700 (PDT) Content-Disposition: inline In-Reply-To: <20160920123054.195021-3-mika.westerberg@linux.intel.com> Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: Mika Westerberg Cc: "Rafael J . Wysocki" , Wim Van Sebroeck , Guenter Roeck , Len Brown , Jean Delvare , Wolfram Sang , Peter Tyser , Zha Qipeng , Darren Hart , linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org On Tue, 20 Sep 2016, Mika Westerberg wrote: > ACPI WDAT table is the preferred way to use hardware watchdog over the > native iTCO_wdt. Windows only uses this table for its hardware watchdog > implementation so we should be relatively safe to trust it has been > validated by OEMs > > Prevent iTCO watchdog creation if we detect that there is ACPI WDAT table. > > Signed-off-by: Mika Westerberg > Reviewed-by: Guenter Roeck > --- > drivers/mfd/lpc_ich.c | 4 ++++ > 1 file changed, 4 insertions(+) Applied, thanks. > diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c > index bd3aa4578346..c8dee47b45d9 100644 > --- a/drivers/mfd/lpc_ich.c > +++ b/drivers/mfd/lpc_ich.c > @@ -984,6 +984,10 @@ static int lpc_ich_init_wdt(struct pci_dev *dev) > int ret; > struct resource *res; > > + /* If we have ACPI based watchdog use that instead */ > + if (acpi_has_watchdog()) > + return -ENODEV; > + > /* Setup power management base register */ > pci_read_config_dword(dev, priv->abase, &base_addr_cfg); > base_addr = base_addr_cfg & 0x0000ff80; -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog