From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pavel Machek Subject: Re: v4.10-rc1: does not wake up from suspend-to-RAM Date: Wed, 28 Dec 2016 10:53:11 +0100 Message-ID: <20161228095311.GA30084@amd> References: <20161227130435.GA4535@amd> <20161227203118.GA9658@amd> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="sdtB3X0nJg68CQEu" Return-path: Content-Disposition: inline In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org To: "Rafael J. Wysocki" Cc: kernel list , "Rafael J. Wysocki" , Linux-pm mailing list , ACPI mailing list List-Id: linux-acpi@vger.kernel.org --sdtB3X0nJg68CQEu Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Wed 2016-12-28 01:35:11, Rafael J. Wysocki wrote: > On Tue, Dec 27, 2016 at 9:31 PM, Pavel Machek wrote: > > Hi! > > > >> Machine is plain Intel desktop. > >> > >> Even power light does not turn on. Fun. If I force power off by > >> holding power button down, power light stays off during the next > >> boot. Interesting. I guess EC is confused. > >> > >> Thinkpad X60 with similar kernel config works. > > > > Acer notebook does not work, either. Same config as x60. > > > > Handle 0x0001, DMI type 1, 27 bytes > > System Information > > Manufacturer: Acer > > Product Name: Aspire 5732Z > > Version: V3.07 > > > > pavel@half:~$ lspci > > 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory C= ontroller Hub (rev 07) > > 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Expre= ss Graphics Port (rev 07) > > 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI= Controller #4 (rev 03) > > 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHC= I Controller #2 (rev 03) > > 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio C= ontroller (rev 03) > > 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express = Port 1 (rev 03) > > 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express = Port 2 (rev 03) > > 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express = Port 3 (rev 03) > > 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI= Controller #1 (rev 03) > > 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI= Controller #2 (rev 03) > > 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI= Controller #3 (rev 03) > > 00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI= Controller #6 (rev 03) > > 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHC= I Controller #1 (rev 03) > > 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) > > 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (r= ev 03) > > 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E)= 4 port SATA Controller [AHCI mode] (rev 03) > > 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller = (rev 03) > > 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/AT= I] RV710/M92 [Mobility Radeon HD 4530/4570/545v] > > 04:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (= rev 01) > > 05:00.0 Ethernet controller: Qualcomm Atheros AR8132 Fast Ethernet (rev= c0) > > pavel@half:~$ > > > > Any ideas? Does it work for you? >=20 > There is a fix in the current mainline on top of -rc1 that should help > (works for me). Thanks. I updated to latest mainline, and at least my test machine works. I'll re-test on my machine later. Best regards, Pavel --=20 (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blo= g.html --sdtB3X0nJg68CQEu Content-Type: application/pgp-signature; name="signature.asc" Content-Description: Digital signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEARECAAYFAlhji4cACgkQMOfwapXb+vKxJQCgkOkCyv0pVgNtjmWy7wTFvd1i eqAAn37sVYUxaCqEMo2W/r8aQ6zKjX7E =vo5n -----END PGP SIGNATURE----- --sdtB3X0nJg68CQEu--