From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: x86@kernel.org
Cc: linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-ia64@vger.kernel.org, Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
Andrew Jones <drjones@redhat.com>
Subject: [PATCH] x86/acpi: keep x86_cpu_to_acpiid mapping valid on cpu hotplug
Date: Mon, 6 Feb 2017 18:01:51 +0100 [thread overview]
Message-ID: <20170206170151.25542-1-vkuznets@redhat.com> (raw)
We may or may not have all possible CPUs in MADT on boot but in any case
we're overwriting x86_cpu_to_acpiid mapping with U32_MAX when
acpi_register_lapic() is called again on the CPU hotplug path:
acpi_processor_hotadd_init() -> acpi_map_cpu() -> acpi_register_lapic().
As we have the required acpi_id information in acpi_processor_hotadd_init()
propagate it to acpi_map_cpu() to always keep x86_cpu_to_acpiid mapping
valid.
Reported-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
arch/ia64/kernel/acpi.c | 3 ++-
arch/x86/kernel/acpi/boot.c | 5 +++--
drivers/acpi/acpi_processor.c | 4 ++--
include/linux/acpi.h | 3 ++-
4 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 9273e03..7508c30 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -887,7 +887,8 @@ static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu)
}
/* wrapper to silence section mismatch warning */
-int __ref acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, int *pcpu)
+int __ref acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, u32 acpi_id,
+ int *pcpu)
{
return _acpi_map_lsapic(handle, physid, pcpu);
}
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 64422f8..04bc5f3 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -723,11 +723,12 @@ int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
return 0;
}
-int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, int *pcpu)
+int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, u32 acpi_id,
+ int *pcpu)
{
int cpu;
- cpu = acpi_register_lapic(physid, U32_MAX, ACPI_MADT_ENABLED);
+ cpu = acpi_register_lapic(physid, acpi_id, ACPI_MADT_ENABLED);
if (cpu < 0) {
pr_info(PREFIX "Unable to map lapic to logical cpu number\n");
return cpu;
diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
index 3de3b6b..4467a80 100644
--- a/drivers/acpi/acpi_processor.c
+++ b/drivers/acpi/acpi_processor.c
@@ -165,7 +165,7 @@ static int acpi_processor_errata(void)
#ifdef CONFIG_ACPI_HOTPLUG_CPU
int __weak acpi_map_cpu(acpi_handle handle,
- phys_cpuid_t physid, int *pcpu)
+ phys_cpuid_t physid, u32 acpi_id, int *pcpu)
{
return -ENODEV;
}
@@ -203,7 +203,7 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr)
cpu_maps_update_begin();
cpu_hotplug_begin();
- ret = acpi_map_cpu(pr->handle, pr->phys_id, &pr->id);
+ ret = acpi_map_cpu(pr->handle, pr->phys_id, pr->acpi_id, &pr->id);
if (ret)
goto out;
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 5b36974..6ab47e9 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -291,7 +291,8 @@ bool acpi_processor_validate_proc_id(int proc_id);
#ifdef CONFIG_ACPI_HOTPLUG_CPU
/* Arch dependent functions for cpu hotplug support */
-int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, int *pcpu);
+int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, u32 acpi_id,
+ int *pcpu);
int acpi_unmap_cpu(int cpu);
int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid);
#endif /* CONFIG_ACPI_HOTPLUG_CPU */
--
2.9.3
next reply other threads:[~2017-02-06 17:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-06 17:01 Vitaly Kuznetsov [this message]
2017-02-06 21:05 ` [PATCH] x86/acpi: keep x86_cpu_to_acpiid mapping valid on cpu hotplug Rafael J. Wysocki
2017-02-07 9:29 ` Vitaly Kuznetsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170206170151.25542-1-vkuznets@redhat.com \
--to=vkuznets@redhat.com \
--cc=drjones@redhat.com \
--cc=hpa@zytor.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-ia64@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).