[PATCH resend 0/3] Add support for BCM2E7E ACPI PNP id

[PATCH resend 0/3] Add support for BCM2E7E ACPI PNP id

[Hans de Goede]

Hi Marcel,

As requested here is a resend of my patches to add support for the
BCM2E7E ACPI PNP id and to revert the workaround for the all 0
USB id.

Regards,

Hans

[PATCH resend 1/3] Bluetooth: btbcm: Add entry for BCM4356A2 UART bluetooth

[Hans de Goede]

This patch adds the device ID for the bluetooth chip used in the
Broadcom BCM4356 PCI-E WiFi / UART BT chip.

Successfully tested using Firmware version 0273

The upper nibble of the rev field is 2 on this device, so this commit
also adds handling of 2 to the switch-case done on the upper nibble.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 drivers/bluetooth/btbcm.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index 06e8bed4f5eb..ae1fa390f508 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -328,6 +328,7 @@ static const struct {
 	{ 0x610c, "BCM4354"	},	/* 003.001.012 */
 	{ 0x2209, "BCM43430A1"  },	/* 001.002.009 */
 	{ 0x6119, "BCM4345C0"	},	/* 003.001.025 */
+	{ 0x230f, "BCM4356A2"	},	/* 001.003.015 */
 	{ }
 };
 
@@ -362,6 +363,7 @@ int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len)
 	switch ((rev & 0xf000) >> 12) {
 	case 0:
 	case 1:
+	case 2:
 	case 3:
 		for (i = 0; bcm_uart_subver_table[i].name; i++) {
 			if (subver == bcm_uart_subver_table[i].subver) {
-- 
2.14.2

[PATCH resend 3/3] Revert "Bluetooth: btusb: Add workaround for Broadcom devices without product id"

[Hans de Goede]

Commit 9834e586fa66 ("Bluetooth: btusb: Add workaround for Broadcom devices
without product id") was added to deal with the BT part of the BCM4356A2
on GPD pocket laptops having an usb vid:pid of 0000:0000.

After another commit to add support for the BCM UART connected BT ACPI-id
BCM2E7E used on the GPD win, it turns out that the BT on the GPD pocket is
connected via both USB and UART. Adding support for the BCM2E7E ACPI-id
causes it to switch to UART mode.

The Windows shipped with the device is using it in UART mode and the
presence of the BCM2E7E ACPI-id combined with the all 0 USB vid:pid
indicates that the BT part was never meant to be used in USB mode.

With the recent patches to use serdev device enumeration / instantiation
for UART attached ACPI enumerated BT devices, everything work OOTB in UART
mode and the workaround for the all 0 USB vid:pid is no longer needed.

This reverts commit 9834e586fa ("Bluetooth: btusb: Add workaround for
Broadcom devices without product id").

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 drivers/bluetooth/btusb.c | 18 ------------------
 1 file changed, 18 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 7a5c06aaa181..c054d7bce490 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -66,7 +66,6 @@ static struct usb_driver btusb_driver;
 #define BTUSB_BCM2045		0x40000
 #define BTUSB_IFNUM_2		0x80000
 #define BTUSB_CW6622		0x100000
-#define BTUSB_BCM_NO_PRODID	0x200000
 
 static const struct usb_device_id btusb_table[] = {
 	/* Generic Bluetooth USB device */
@@ -171,10 +170,6 @@ static const struct usb_device_id btusb_table[] = {
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x0930, 0xff, 0x01, 0x01),
 	  .driver_info = BTUSB_BCM_PATCHRAM },
 
-	/* Broadcom devices with missing product id */
-	{ USB_DEVICE_AND_INTERFACE_INFO(0x0000, 0x0000, 0xff, 0x01, 0x01),
-	  .driver_info = BTUSB_BCM_PATCHRAM | BTUSB_BCM_NO_PRODID },
-
 	/* Intel Bluetooth USB Bootloader (RAM module) */
 	{ USB_DEVICE(0x8087, 0x0a5a),
 	  .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC },
@@ -2909,19 +2904,6 @@ static int btusb_probe(struct usb_interface *intf,
 	if (id->driver_info == BTUSB_IGNORE)
 		return -ENODEV;
 
-	if (id->driver_info & BTUSB_BCM_NO_PRODID) {
-		struct usb_device *udev = interface_to_usbdev(intf);
-
-		/* For the broken Broadcom devices that show 0000:0000
-		 * as USB vendor and product information, check that the
-		 * manufacturer string identifies them as Broadcom based
-		 * devices.
-		 */
-		if (!udev->manufacturer ||
-		    strcmp(udev->manufacturer, "Broadcom Corp"))
-			return -ENODEV;
-	}
-
 	if (id->driver_info & BTUSB_ATH3012) {
 		struct usb_device *udev = interface_to_usbdev(intf);
 
-- 
2.14.2

[PATCH resend 2/3] Bluetooth: hci_bcm: Add support for BCM2E7E

[Hans de Goede]

Tested on a GPD win with a BCM4356 PCI-E wifi/bt combo card.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/bluetooth/hci_bcm.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index c69da0e8b79f..707c2d1b84c7 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -941,6 +941,7 @@ static const struct acpi_device_id bcm_acpi_match[] = {
 	{ "BCM2E71", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
 	{ "BCM2E7B", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
 	{ "BCM2E7C", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
+	{ "BCM2E7E", (kernel_ulong_t)&acpi_bcm_int_first_gpios },
 	{ "BCM2E95", (kernel_ulong_t)&acpi_bcm_int_first_gpios },
 	{ "BCM2E96", (kernel_ulong_t)&acpi_bcm_int_first_gpios },
 	{ "BCM2EA4", (kernel_ulong_t)&acpi_bcm_int_first_gpios },
-- 
2.14.2

Re: [PATCH resend 0/3] Add support for BCM2E7E ACPI PNP id

[Marcel Holtmann]

Hi Hans,

> As requested here is a resend of my patches to add support for the
> BCM2E7E ACPI PNP id and to revert the workaround for the all 0
> USB id.

all 3 patches have been applied to bluetooth-next tree.

Regards

Marcel