From: Alexandru Gagniuc <mr.nuke.me@gmail.com>
To: linux-acpi@vger.kernel.org, linux-edac@vger.kernel.org
Cc: rjw@rjwysocki.net, lenb@kernel.org, tony.luck@intel.com,
bp@alien8.de, tbaicar@codeaurora.org, will.deacon@arm.com,
james.morse@arm.com, shiju.jose@huawei.com,
zjzhang@codeaurora.org, gengdongjiu@huawei.com,
linux-kernel@vger.kernel.org, alex_gagniuc@dellteam.com,
austin_bolen@dell.com, shyam_iyer@dell.com, devel@acpica.org,
mchehab@kernel.org, robert.moore@intel.com,
erik.schmauss@intel.com, Alexandru Gagniuc <mr.nuke.me@gmail.com>
Subject: [RFC PATCH v2 2/4] acpi: apei: Split GHES handlers outside of ghes_do_proc
Date: Mon, 16 Apr 2018 16:59:01 -0500 [thread overview]
Message-ID: <20180416215903.7318-3-mr.nuke.me@gmail.com> (raw)
In-Reply-To: <20180416215903.7318-1-mr.nuke.me@gmail.com>
Use a mapping from CPER UUID to get the correct handler for a given
GHES error. This is in preparation of splitting some handlers into
irq safe and regular parts.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
---
drivers/acpi/apei/ghes.c | 78 ++++++++++++++++++++++++++++++++++++++----------
1 file changed, 63 insertions(+), 15 deletions(-)
diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index f9b53a6f55f3..2119c51b4a9e 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -414,6 +414,25 @@ static void ghes_handle_memory_failure(struct acpi_hest_generic_data *gdata, int
#endif
}
+static int ghes_handle_arm(struct acpi_hest_generic_data *gdata, int sev)
+{
+ struct cper_sec_proc_arm *err = acpi_hest_get_payload(gdata);
+
+ log_arm_hw_error(err);
+ return ghes_severity(gdata->error_severity);
+}
+
+static int ghes_handle_mem(struct acpi_hest_generic_data *gdata, int sev)
+{
+ struct cper_sec_mem_err *mem_err = acpi_hest_get_payload(gdata);
+
+ ghes_edac_report_mem_error(sev, mem_err);
+ arch_apei_report_mem_error(sev, mem_err);
+ ghes_handle_memory_failure(gdata, sev);
+
+ return ghes_severity(gdata->error_severity);
+}
+
/*
* PCIe AER errors need to be sent to the AER driver for reporting and
* recovery. The GHES severities map to the following AER severities and
@@ -428,7 +447,7 @@ static void ghes_handle_memory_failure(struct acpi_hest_generic_data *gdata, int
* GHES_SEV_PANIC does not make it to this handling since the kernel must
* panic.
*/
-static void ghes_handle_aer(struct acpi_hest_generic_data *gdata)
+static int ghes_handle_aer(struct acpi_hest_generic_data *gdata, int sev)
{
#ifdef CONFIG_ACPI_APEI_PCIEAER
struct cper_sec_pcie *pcie_err = acpi_hest_get_payload(gdata);
@@ -456,14 +475,54 @@ static void ghes_handle_aer(struct acpi_hest_generic_data *gdata)
(struct aer_capability_regs *)
pcie_err->aer_info);
}
+
+ return GHES_SEV_CORRECTED;
#endif
+ return ghes_severity(gdata->error_severity);
}
+/**
+ * ghes_handler - handler for ACPI APEI errors
+ * @error_uuid: UUID describing the error entry (See ACPI/EFI CPER for details)
+ * @handle: Handler for the GHES entry of type 'error_uuid'. The handler
+ * returns the severity of the error after handling. A handler is allowed
+ * to demote errors to correctable or corrected, as appropriate.
+ */
+static const struct ghes_handler {
+ const guid_t *error_uuid;
+ int (*handle_irqsafe)(struct acpi_hest_generic_data *gdata, int sev);
+ int (*handle)(struct acpi_hest_generic_data *gdata, int sev);
+} ghes_handlers[] = {
+ {
+ .error_uuid = &CPER_SEC_PLATFORM_MEM,
+ .handle = ghes_handle_mem,
+ }, {
+ .error_uuid = &CPER_SEC_PCIE,
+ .handle = ghes_handle_aer,
+ }, {
+ .error_uuid = &CPER_SEC_PROC_ARM,
+ .handle = ghes_handle_arm,
+ }
+};
+
+static const struct ghes_handler *get_handler(const guid_t *type)
+{
+ size_t i;
+
+ for (i = 0; i < ARRAY_SIZE(ghes_handlers); i++) {
+ if (guid_equal(type, ghes_handlers[i].error_uuid))
+ return &ghes_handlers[i];
+ }
+ return NULL;
+}
+
+
static void ghes_do_proc(struct ghes *ghes,
const struct acpi_hest_generic_status *estatus)
{
int sev, sec_sev;
struct acpi_hest_generic_data *gdata;
+ const struct ghes_handler *handler;
guid_t *sec_type;
guid_t *fru_id = &NULL_UUID_LE;
char *fru_text = "";
@@ -478,21 +537,10 @@ static void ghes_do_proc(struct ghes *ghes,
if (gdata->validation_bits & CPER_SEC_VALID_FRU_TEXT)
fru_text = gdata->fru_text;
- if (guid_equal(sec_type, &CPER_SEC_PLATFORM_MEM)) {
- struct cper_sec_mem_err *mem_err = acpi_hest_get_payload(gdata);
-
- ghes_edac_report_mem_error(sev, mem_err);
-
- arch_apei_report_mem_error(sev, mem_err);
- ghes_handle_memory_failure(gdata, sev);
- }
- else if (guid_equal(sec_type, &CPER_SEC_PCIE)) {
- ghes_handle_aer(gdata);
- }
- else if (guid_equal(sec_type, &CPER_SEC_PROC_ARM)) {
- struct cper_sec_proc_arm *err = acpi_hest_get_payload(gdata);
- log_arm_hw_error(err);
+ handler = get_handler(sec_type);
+ if (handler) {
+ sec_sev = handler->handle(gdata, sev);
} else {
void *err = acpi_hest_get_payload(gdata);
--
2.14.3
next prev parent reply other threads:[~2018-04-16 21:59 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-16 21:58 [RFC PATCH v2 0/4] acpi: apei: Improve error handling with firmware-first Alexandru Gagniuc
2018-04-16 21:59 ` [RFC PATCH v2 1/4] EDAC, GHES: Remove unused argument to ghes_edac_report_mem_error Alexandru Gagniuc
2018-04-17 9:36 ` Borislav Petkov
2018-04-17 16:43 ` Alex G.
2018-04-16 21:59 ` Alexandru Gagniuc [this message]
2018-04-18 17:52 ` [RFC PATCH v2 2/4] acpi: apei: Split GHES handlers outside of ghes_do_proc Borislav Petkov
2018-04-19 14:19 ` Alex G.
2018-04-19 14:30 ` Borislav Petkov
2018-04-19 14:57 ` Alex G.
2018-04-19 15:29 ` Borislav Petkov
2018-04-19 15:46 ` Alex G.
2018-04-19 16:40 ` Borislav Petkov
2018-04-16 21:59 ` [RFC PATCH v2 3/4] acpi: apei: Do not panic() when correctable errors are marked as fatal Alexandru Gagniuc
2018-04-18 17:54 ` Borislav Petkov
2018-04-19 14:57 ` Alex G.
2018-04-19 15:35 ` James Morse
2018-04-19 16:27 ` Alex G.
2018-04-19 15:40 ` Borislav Petkov
2018-04-19 16:26 ` Alex G.
2018-04-19 16:45 ` Borislav Petkov
2018-04-19 17:40 ` Alex G.
2018-04-19 19:03 ` Borislav Petkov
2018-04-19 22:55 ` Alex G.
2018-04-22 10:48 ` Borislav Petkov
2018-04-24 4:19 ` Alex G.
2018-04-25 14:01 ` Borislav Petkov
2018-04-25 15:00 ` Alex G.
2018-04-25 17:15 ` Borislav Petkov
2018-04-25 17:27 ` Alex G.
2018-04-25 17:39 ` Borislav Petkov
2018-04-16 21:59 ` [RFC PATCH v2 4/4] acpi: apei: Warn when GHES marks correctable errors as "fatal" Alexandru Gagniuc
2018-04-18 17:54 ` Borislav Petkov
2018-04-19 15:11 ` Alex G.
2018-04-19 15:46 ` Borislav Petkov
2018-04-25 20:39 ` [RFC PATCH v3 0/3] acpi: apei: Improve PCIe error handling with firmware-first Alexandru Gagniuc
2018-04-25 20:39 ` [RFC PATCH v3 1/3] EDAC, GHES: Remove unused argument to ghes_edac_report_mem_error Alexandru Gagniuc
2018-04-25 20:39 ` [RFC PATCH v3 2/3] acpi: apei: Do not panic() on PCIe errors reported through GHES Alexandru Gagniuc
2018-04-26 11:19 ` Borislav Petkov
2018-04-26 17:44 ` Alex G.
2018-04-25 20:39 ` [RFC PATCH v3 3/3] acpi: apei: Warn when GHES marks correctable errors as "fatal" Alexandru Gagniuc
2018-04-26 11:20 ` Borislav Petkov
2018-04-26 17:47 ` Alex G.
2018-04-26 18:03 ` Borislav Petkov
2018-05-02 19:10 ` Pavel Machek
2018-05-02 19:29 ` Alex G.
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180416215903.7318-3-mr.nuke.me@gmail.com \
--to=mr.nuke.me@gmail.com \
--cc=alex_gagniuc@dellteam.com \
--cc=austin_bolen@dell.com \
--cc=bp@alien8.de \
--cc=devel@acpica.org \
--cc=erik.schmauss@intel.com \
--cc=gengdongjiu@huawei.com \
--cc=james.morse@arm.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=rjw@rjwysocki.net \
--cc=robert.moore@intel.com \
--cc=shiju.jose@huawei.com \
--cc=shyam_iyer@dell.com \
--cc=tbaicar@codeaurora.org \
--cc=tony.luck@intel.com \
--cc=will.deacon@arm.com \
--cc=zjzhang@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).