From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heikki Krogerus Subject: [PATCH 09/11] platform/x86: intel_cht_int33fe: Provide fwnode for the USB connector Date: Wed, 3 Apr 2019 19:45:35 +0300 Message-ID: <20190403164537.24643-10-heikki.krogerus@linux.intel.com> References: <20190403164537.24643-1-heikki.krogerus@linux.intel.com> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20190403164537.24643-1-heikki.krogerus@linux.intel.com> Sender: linux-kernel-owner@vger.kernel.org To: "Rafael J. Wysocki" , Greg Kroah-Hartman , Hans de Goede Cc: Darren Hart , Andy Shevchenko , linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org, platform-driver-x86@vger.kernel.org List-Id: linux-acpi@vger.kernel.org In ACPI, and now also in DT, the USB connectors usually have their own device nodes. In case of USB Type-C, those connector (port) nodes are child nodes of the controller or PHY device, in our case the fusb302. The software fwnodes allow us to create a similar child node for fusb302 that represents the connector also on Intel CHT. This makes it possible replace the fusb302 specific device properties which were deprecated with the common USB connector properties that tcpm.c is able to use directly. Signed-off-by: Heikki Krogerus --- drivers/platform/x86/intel_cht_int33fe.c | 37 ++++++++++++++++++++++-- 1 file changed, 34 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c index 2f12ce154489..544e0b90aa07 100644 --- a/drivers/platform/x86/intel_cht_int33fe.c +++ b/drivers/platform/x86/intel_cht_int33fe.c @@ -25,6 +25,7 @@ #include #include #include +#include #define EXPECTED_PTYPE 4 @@ -32,6 +33,7 @@ enum { INT33FE_NODE_FUSB302, INT33FE_NODE_MAX17047, INT33FE_NODE_PI3USB30532, + INT33FE_NODE_USB_CONNECTOR, INT33FE_NODE_MAX, }; @@ -112,9 +114,29 @@ cht_int33fe_max17047(struct device *dev, struct cht_int33fe_data *data) static const struct property_entry fusb302_props[] = { PROPERTY_ENTRY_STRING("linux,extcon-name", "cht_wcove_pwrsrc"), - PROPERTY_ENTRY_U32("fcs,max-sink-microvolt", 12000000), - PROPERTY_ENTRY_U32("fcs,max-sink-microamp", 3000000), - PROPERTY_ENTRY_U32("fcs,max-sink-microwatt", 36000000), + { } +}; + +#define PDO_FIXED_FLAGS \ + (PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM) + +static const u32 src_pdo[] = { + PDO_FIXED(5000, 1500, PDO_FIXED_FLAGS), +}; + +static const u32 snk_pdo[] = { + PDO_FIXED(5000, 400, PDO_FIXED_FLAGS), + PDO_VAR(5000, 12000, 3000), +}; + +static const struct property_entry usb_connector_props[] = { + PROPERTY_ENTRY_STRING("name", "connector"), + PROPERTY_ENTRY_STRING("data-role", "dual"), + PROPERTY_ENTRY_STRING("power-role", "dual"), + PROPERTY_ENTRY_STRING("try-power-role", "sink"), + PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo), + PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo), + PROPERTY_ENTRY_U32("op-sink-microwatt", 36000000), { } }; @@ -149,6 +171,15 @@ static int cht_int33fe_add_nodes(struct cht_int33fe_data *data) data->node[i] = fwnode; } + /* Node for the USB connector (FUSB302 is the parent) */ + fwnode = fwnode_create_software_node(usb_connector_props, + data->node[INT33FE_NODE_FUSB302]); + if (IS_ERR(fwnode)) { + ret = PTR_ERR(fwnode); + goto err_remove_nodes; + } + data->node[INT33FE_NODE_USB_CONNECTOR] = fwnode; + return 0; err_remove_nodes: -- 2.20.1