From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: wsa@the-dreams.de, jarkko.nikula@linux.intel.com,
andriy.shevchenko@linux.intel.com, linux-i2c@vger.kernel.org,
linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org,
benjamin.tissoires@redhat.com, jbroadus@gmail.com,
patches@opensource.cirrus.com
Subject: Re: [PATCH v6 4/7] i2c: core: Make i2c_acpi_get_irq available to the rest of the I2C core
Date: Tue, 25 Jun 2019 14:50:11 +0300 [thread overview]
Message-ID: <20190625115011.GE2640@lahna.fi.intel.com> (raw)
In-Reply-To: <20190621100815.12417-5-ckeepax@opensource.cirrus.com>
On Fri, Jun 21, 2019 at 11:08:12AM +0100, Charles Keepax wrote:
> In preparation for more refactoring make i2c_acpi_get_irq available
> outside i2c-core-acpi.c.
>
> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
> ---
>
> Changes since v5:
> - Pass a struct device rather than acpi_device to i2c_acpi_get_irq,
> note this is more awkward than I would have liked as I am very
> unconvinced that adev->dev can actually be passed to
> ACPI_COMPANION. If anyone can answer that for sure that would be
> very helpful.
I don't think you can do that.
I probably missed some previous discussion but what's wrong passing
struct i2c_client instead and use ACPI_COMPANION() for that?
>
> Thanks,
> Charles
>
> drivers/i2c/i2c-core-acpi.c | 13 +++++++++++--
> drivers/i2c/i2c-core.h | 7 +++++++
> 2 files changed, 18 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
> index c91492eaacd93..37bf80b35365f 100644
> --- a/drivers/i2c/i2c-core-acpi.c
> +++ b/drivers/i2c/i2c-core-acpi.c
> @@ -145,8 +145,17 @@ static int i2c_acpi_add_resource(struct acpi_resource *ares, void *data)
> return 1;
> }
>
> -static int i2c_acpi_get_irq(struct acpi_device *adev)
> +/**
> + * i2c_acpi_get_irq - get device IRQ number from ACPI
> + * @client: Pointer to the I2C client device
I think this should be @dev now.
> + *
> + * Find the IRQ number used by a specific client device.
> + *
> + * Return: The IRQ number or an error code.
> + */
> +int i2c_acpi_get_irq(struct device *dev)
> {
> + struct acpi_device *adev = container_of(dev, struct acpi_device, dev);
> struct list_head resource_list;
> int irq = -ENOENT;
> int ret;
> @@ -199,7 +208,7 @@ static int i2c_acpi_get_info(struct acpi_device *adev,
> *adapter_handle = lookup.adapter_handle;
>
> /* Then fill IRQ number if any */
> - info->irq = i2c_acpi_get_irq(adev);
> + info->irq = i2c_acpi_get_irq(&adev->dev);
> if (info->irq < 0)
> return info->irq;
>
> diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h
> index 2a3b28bf826b1..1735ac17a957a 100644
> --- a/drivers/i2c/i2c-core.h
> +++ b/drivers/i2c/i2c-core.h
> @@ -63,6 +63,8 @@ const struct acpi_device_id *
> i2c_acpi_match_device(const struct acpi_device_id *matches,
> struct i2c_client *client);
> void i2c_acpi_register_devices(struct i2c_adapter *adap);
> +
> +int i2c_acpi_get_irq(struct device *dev);
> #else /* CONFIG_ACPI */
> static inline void i2c_acpi_register_devices(struct i2c_adapter *adap) { }
> static inline const struct acpi_device_id *
> @@ -71,6 +73,11 @@ i2c_acpi_match_device(const struct acpi_device_id *matches,
> {
> return NULL;
> }
> +
> +static inline int i2c_acpi_get_irq(struct device *dev)
> +{
> + return 0;
> +}
> #endif /* CONFIG_ACPI */
> extern struct notifier_block i2c_acpi_notifier;
>
> --
> 2.11.0
next prev parent reply other threads:[~2019-06-25 11:50 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-21 10:08 [PATCH v6 0/7] I2C IRQ Probe Improvements Charles Keepax
2019-06-21 10:08 ` [PATCH v6 1/7] i2c: core: Allow whole core to use i2c_dev_irq_from_resources Charles Keepax
2019-06-21 10:08 ` [PATCH v6 2/7] i2c: acpi: Use available IRQ helper functions Charles Keepax
2019-06-21 10:08 ` [PATCH v6 3/7] i2c: acpi: Factor out getting the IRQ from ACPI Charles Keepax
2019-06-21 10:08 ` [PATCH v6 4/7] i2c: core: Make i2c_acpi_get_irq available to the rest of the I2C core Charles Keepax
2019-06-21 12:24 ` Andy Shevchenko
2019-06-25 11:50 ` Mika Westerberg [this message]
2019-06-25 12:42 ` Charles Keepax
2019-06-25 13:25 ` Andy Shevchenko
2019-06-26 12:58 ` Charles Keepax
2019-06-21 10:08 ` [PATCH v6 5/7] i2c: core: Move ACPI IRQ handling to probe time Charles Keepax
2019-06-21 10:08 ` [PATCH v6 6/7] i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq Charles Keepax
2019-06-21 10:08 ` [PATCH v6 7/7] i2c: core: Tidy up handling of init_irq Charles Keepax
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190625115011.GE2640@lahna.fi.intel.com \
--to=mika.westerberg@linux.intel.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=benjamin.tissoires@redhat.com \
--cc=ckeepax@opensource.cirrus.com \
--cc=jarkko.nikula@linux.intel.com \
--cc=jbroadus@gmail.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox