From: Jeremy Linton <jeremy.linton@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-acpi@vger.kernel.org, catalin.marinas@arm.com,
will@kernel.org, rjw@rjwysocki.net, lenb@kernel.org,
lorenzo.pieralisi@arm.com, sudeep.holla@arm.com,
Jeremy Linton <jeremy.linton@arm.com>
Subject: [PATCH v4 1/2] ACPI/PPTT: Add support for ACPI 6.3 thread flag
Date: Wed, 31 Jul 2019 22:46:33 -0500 [thread overview]
Message-ID: <20190801034634.26913-2-jeremy.linton@arm.com> (raw)
In-Reply-To: <20190801034634.26913-1-jeremy.linton@arm.com>
ACPI 6.3 adds a flag to the CPU node to indicate whether
the given PE is a thread. Add a function to return that
information for a given linux logical CPU.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
drivers/acpi/pptt.c | 54 +++++++++++++++++++++++++++++++++++++++++++-
include/linux/acpi.h | 5 ++++
2 files changed, 58 insertions(+), 1 deletion(-)
diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
index 1e7ac0bd0d3a..84718f6cb741 100644
--- a/drivers/acpi/pptt.c
+++ b/drivers/acpi/pptt.c
@@ -540,6 +540,44 @@ static int find_acpi_cpu_topology_tag(unsigned int cpu, int level, int flag)
return retval;
}
+/**
+ * check_acpi_cpu_flag() - Determine if CPU node has a flag set
+ * @cpu: Kernel logical CPU number
+ * @rev: The PPTT revision defining the flag
+ * @flag: The flag itself
+ *
+ * Check the node representing a CPU for a given flag.
+ *
+ * Return: -ENOENT if the PPTT doesn't exist, the CPU cannot be found or
+ * the table revision isn't new enough.
+ * 1, any passed flag set
+ * 0, flag unset
+ */
+static int check_acpi_cpu_flag(unsigned int cpu, int rev, u32 flag)
+{
+ struct acpi_table_header *table;
+ acpi_status status;
+ u32 acpi_cpu_id = get_acpi_id_for_cpu(cpu);
+ struct acpi_pptt_processor *cpu_node = NULL;
+ int ret = -ENOENT;
+
+ status = acpi_get_table(ACPI_SIG_PPTT, 0, &table);
+ if (ACPI_FAILURE(status)) {
+ acpi_pptt_warn_missing();
+ return ret;
+ }
+
+ if (table->revision >= rev)
+ cpu_node = acpi_find_processor_node(table, acpi_cpu_id);
+
+ if (cpu_node)
+ ret = (cpu_node->flags & flag) != 0;
+
+ acpi_put_table(table);
+
+ return ret;
+}
+
/**
* acpi_find_last_cache_level() - Determines the number of cache levels for a PE
* @cpu: Kernel logical CPU number
@@ -604,6 +642,21 @@ int cache_setup_acpi(unsigned int cpu)
return status;
}
+/**
+ * acpi_pptt_cpu_is_thread() - Determine if CPU is a thread
+ * @cpu: Kernel logical CPU number
+ *
+ *
+ * Return: 1, a thread
+ * 0, not a thread
+ * -ENOENT ,if the PPTT doesn't exist, the CPU cannot be found or
+ * the table revision isn't new enough.
+ */
+int acpi_pptt_cpu_is_thread(unsigned int cpu)
+{
+ return check_acpi_cpu_flag(cpu, 2, ACPI_PPTT_ACPI_PROCESSOR_IS_THREAD);
+}
+
/**
* find_acpi_cpu_topology() - Determine a unique topology value for a given CPU
* @cpu: Kernel logical CPU number
@@ -664,7 +717,6 @@ int find_acpi_cpu_cache_topology(unsigned int cpu, int level)
return ret;
}
-
/**
* find_acpi_cpu_topology_package() - Determine a unique CPU package value
* @cpu: Kernel logical CPU number
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 9426b9aaed86..9d0e20a2ac83 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -1302,11 +1302,16 @@ static inline int lpit_read_residency_count_address(u64 *address)
#endif
#ifdef CONFIG_ACPI_PPTT
+int acpi_pptt_cpu_is_thread(unsigned int cpu);
int find_acpi_cpu_topology(unsigned int cpu, int level);
int find_acpi_cpu_topology_package(unsigned int cpu);
int find_acpi_cpu_topology_hetero_id(unsigned int cpu);
int find_acpi_cpu_cache_topology(unsigned int cpu, int level);
#else
+static inline int acpi_pptt_cpu_is_thread(unsigned int cpu)
+{
+ return -EINVAL;
+}
static inline int find_acpi_cpu_topology(unsigned int cpu, int level)
{
return -EINVAL;
--
2.21.0
next prev parent reply other threads:[~2019-08-01 3:46 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-01 3:46 [PATCH v4 0/2] arm64/PPTT ACPI 6.3 thread flag support Jeremy Linton
2019-08-01 3:46 ` Jeremy Linton [this message]
2019-08-01 15:57 ` [PATCH v4 1/2] ACPI/PPTT: Add support for ACPI 6.3 thread flag Sudeep Holla
2019-08-01 16:10 ` Jeremy Linton
2019-08-02 13:05 ` Robert Richter
2019-08-02 15:36 ` Jeremy Linton
2019-08-01 3:46 ` [PATCH v4 2/2] arm64: topology: Use PPTT to determine if PE is a thread Jeremy Linton
2019-08-01 15:58 ` Sudeep Holla
2019-08-02 13:44 ` Robert Richter
2019-08-02 16:04 ` Jeremy Linton
-- strict thread matches above, loose matches on Subject: below --
2019-08-08 20:40 [PATCH v4 0/2] arm64/PPTT ACPI 6.3 thread flag support Jeremy Linton
2019-08-08 20:40 ` [PATCH v4 1/2] ACPI/PPTT: Add support for ACPI 6.3 thread flag Jeremy Linton
2019-08-08 22:25 ` Robert Richter
2019-08-12 9:06 ` Rafael J. Wysocki
2019-08-12 11:59 ` Will Deacon
2019-08-20 9:01 ` John Garry
2019-08-21 13:20 ` Jeremy Linton
2019-08-21 13:25 ` John Garry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190801034634.26913-2-jeremy.linton@arm.com \
--to=jeremy.linton@arm.com \
--cc=catalin.marinas@arm.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=rjw@rjwysocki.net \
--cc=sudeep.holla@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox