[PATCH] pinctrl: cherryview: Fix irq_valid_mask calculation

[Hans de Goede <hdegoede@redhat.com>]

Commit 03c4749dd6c7 ("gpio / ACPI: Drop unnecessary ACPI GPIO to Linux
GPIO translation") has made the cherryview gpio numbers sparse, to get
a 1:1 mapping between ACPI pin numbers and gpio numbers in Linux.

This has greatly simplified things, but the code setting the
irq_valid_mask was not updated for this, so the valid mask is still in
the old "compressed" numbering with the gaps in the pin numbers skipped,
which is wrong as irq_valid_mask needs to be expressed in gpio numbers.

This results in the following error on devices using pin 24 (0x0018) on
the north GPIO controller as an ACPI event source:

[    0.422452] cherryview-pinctrl INT33FF:01: Failed to translate GPIO to IRQ

This has been reported (by email) to be happening on a Caterpillar CAT T20
tablet and I've reproduced this myself on a Medion Akoya e2215t 2-in-1.

This commit uses the pin number instead of the compressed index into
community->pins to clear the correct bits in irq_valid_mask for GPIOs
using GPEs for interrupts, fixing these errors and in case of the
Medion Akoya e2215t also fixing the LID switch not working.

Cc: stable@vger.kernel.org
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: 03c4749dd6c7 ("gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/pinctrl/intel/pinctrl-cherryview.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c
index aae51c507f59..02ff5e8b0510 100644
--- a/drivers/pinctrl/intel/pinctrl-cherryview.c
+++ b/drivers/pinctrl/intel/pinctrl-cherryview.c
@@ -1563,7 +1563,7 @@ static void chv_init_irq_valid_mask(struct gpio_chip *chip,
 		intsel >>= CHV_PADCTRL0_INTSEL_SHIFT;
 
 		if (intsel >= community->nirqs)
-			clear_bit(i, valid_mask);
+			clear_bit(desc->number, valid_mask);
 	}
 }
 
-- 
2.23.0