From: Aili Yao <yaoaili@kingsoft.com>
To: Borislav Petkov <bp@alien8.de>
Cc: <rjw@rjwysocki.net>, <lenb@kernel.org>, <tony.luck@intel.com>,
<james.morse@arm.com>, <linux-acpi@vger.kernel.org>,
<linux-edac@vger.kernel.org>, <yangfeng1@kingsoft.com>,
<CHENGUOMIN@kingsoft.com>, Aili Yao <yaoaili@kingsoft.com>
Subject: Re: [PATCH v2] Dump cper error table in mce_panic
Date: Fri, 20 Nov 2020 17:22:35 +0800 [thread overview]
Message-ID: <20201120172235.620eb826.yaoaili@kingsoft.com> (raw)
In-Reply-To: <20201119174508.GE3769@zn.tnic>
On Thu, 19 Nov 2020 18:45:08 +0100
Borislav Petkov <bp@alien8.de> wrote:
> On Thu, Nov 19, 2020 at 01:40:57PM +0800, Aili Yao wrote:
> > [ 0.000000] Linux version 4.18.0+ #37 SMP Thu Nov 19 10:38:16 CST 2020
>
> Ok, before we look any further into this, please redo the whole exercise
> with the latest upstream kernel - not some 4.18 old crap. Use the
> tip/master branch:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/log/?h=master
>
Hi, This test result if from tip/master, previous is upstream latest.
qd01-test-ec2177009236 login:
CentOS Linux 7 (Core)
Kernel 5.10.0-rc3 on an x86_64
qd01-test-ec2177009236 login: [ 103.306303] usb 1-1.6: USB disconnect, device number 4
[ 103.312086] cdc_ether 1-1.6:1.0 usb0: unregister 'cdc_ether' usb-0000:00:14.0-1.6, CDC Ethernet Device
[ 105.326306] usb 1-1.6: new high-speed USB device number 5 using xhci_hcd
[ 105.410891] usb 1-1.6: New USB device found, idVendor=04b3, idProduct=4010, bcdDevice= 3.14
[ 105.420214] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 105.428377] usb 1-1.6: Product: XClarity Controller
[ 105.433827] usb 1-1.6: Manufacturer: IBM
[ 105.440362] cdc_ether 1-1.6:1.0 usb0: register 'cdc_ether' at usb-0000:00:14.0-1.6, CDC Ethernet Device, 3a:68:dd:14:51:1f
[ 111.648657] EINJ: Error INJection is initialized.
[ 111.666355] EDAC MC: Removed device 0 for skx_edac Skylake Socket#0 IMC#0: DEV 0000:2e:0a.0
[ 111.686338] EDAC MC: Removed device 1 for skx_edac Skylake Socket#0 IMC#1: DEV 0000:2e:0c.0
[ 111.701336] EDAC MC: Removed device 2 for skx_edac Skylake Socket#1 IMC#0: DEV 0000:ae:0a.0
[ 111.726334] EDAC MC: Removed device 3 for skx_edac Skylake Socket#1 IMC#1: DEV 0000:ae:0c.0
[ [ 0.000000] Linux version 5.10.0-rc3 (root@qd01-test-ec2177009236.qd01.ksyun.com) (gcc (GCC) 9.3.0, GNU ld version 2.27-43.base.el7_8.1) #3 SMP Fri Nov 20 16:59:03 CST 2020
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.10.0-rc3 ro nomodeset net.ifnames=0 biosdevname=0 rdloaddriver=mlx5_core rdloaddriver=i40e rdloaddriver=ixgbe strict-devmem=0 console=ttyS0,115200n8 irqpoll nr_cpus=1 reset_devices cgroup_disable=memory mce=off numa=off udev.children-max=2 panic=10 rootflags=nofail acpi_no_memhotplug transparent_hugepage=never nokaslr disable_cpu_apicid=0 acpi_rsdp=0xf05a0 elfcorehdr=403684744K
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: xstate_offset[5]: 960, xstate_sizes[5]: 64
[ 0.000000] x86/fpu: xstate_offset[6]: 1024, xstate_sizes[6]: 512
[ 0.000000] x86/fpu: xstate_offset[7]: 1536, xstate_sizes[7]: 1024
[ 0.000000] x86/fpu: xstate_offset[9]: 2560, xstate_sizes[9]: 8
[ 0.000000] x86/fpu: Enabled xstate features 0x2ff, context size is 2568 bytes, using 'compacted' format.
...
...
...
[ 6.280390] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 6.288655] ACPI: Power Button [PWRF]
[ 6.292961] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 6.301295] pstore: Registered erst as persistent store backend
[ 6.307912] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 4
[ 6.308886] {1}[Hardware Error]: event severity: fatal
[ 6.308886] {1}[Hardware Error]: Error 0, type: fatal
[ 6.308886] {1}[Hardware Error]: fru_text: Card03, ChnB, DIMM0
[ 6.308886] {1}[Hardware Error]: section_type: memory error
[ 6.308886] {1}[Hardware Error]: error_status: 0x0000000000000000
[ 6.308886] {1}[Hardware Error]: physical_address: 0x00000031a53f0000
[ 6.308886] {1}[Hardware Error]: node: 2 card: 1 module: 0 rank: 0 bank: 1 device: 0 row: 3541 column: 0
[ 6.308886] {1}[Hardware Error]: DIMM location: CPU 1 DIMM 8
[ 6.308886] Kernel panic - not syncing: Fatal hardware error!
[ 6.308886] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-rc3 #3
[ 6.308886] Hardware name: Lenovo ThinkSystem SR650 -[7X06CTO1WW]-/-[7X06CTO1WW]-, BIOS -[IVE636Z-2.13]- 07/18/2019
[ 6.308886] Call Trace:
[ 6.308886] dump_stack+0x57/0x6a
[ 6.308886] panic+0xfb/0x2d7
[ 6.308886] __ghes_panic.cold+0x21/0x21
[ 6.308886] ghes_proc+0xe0/0x140
[ 6.308886] ghes_probe+0x129/0x380
[ 6.308886] platform_drv_probe+0x35/0x80
[ 6.308886] really_probe+0x31b/0x420
[ 6.308886] driver_probe_device+0xe1/0x150
[ 6.308886] device_driver_attach+0x53/0x60
[ 6.308886] __driver_attach+0x8a/0x150
[ 6.308886] ? device_driver_attach+0x60/0x60
[ 6.308886] ? device_driver_attach+0x60/0x60
[ 6.308886] bus_for_each_dev+0x78/0xc0
[ 6.308886] bus_add_driver+0x14d/0x1f0
[ 6.308886] driver_register+0x6c/0xc0
[ 6.308886] ? bert_init+0x22a/0x22a
[ 6.308886] ghes_init+0x87/0xe5
[ 6.308886] do_one_initcall+0x44/0x1d0
[ 6.308886] kernel_init_freeable+0x1d3/0x235
[ 6.308886] ? rest_init+0xb4/0xb4
[ 6.308886] kernel_init+0xa/0x10c
[ 6.308886] ret_from_fork+0x1f/0x30
[ 6.308886] Kernel Offset: disabled
[ 6.308886] Rebooting in 10 seconds..
[ 6.308886] ACPI MEMORY or I/O RESET_REG.
UEFI:START PEI
UEFI:START PEI
UEFI:MEM INIT
<F1> System Setup <F10> PXE Boot
<F2> Diagnostic <F12> One Time Boot Device
UEFI:DXE INIT
UEFI:DXE INIT
ThinkSystem SR650
Serial Number
J3016250
Machine Type
7X06
BMC IP
10.177.134.108
UEFI Version
2.13 IVE636Z (07/18/2019)
BMC Version
2.70 CDI338D (06/19/2019)
--
Best Regards!
Aili Yao
next prev parent reply other threads:[~2020-11-20 9:22 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-04 6:50 [PATCH] Dump cper error table in mce_panic yaoaili126
2020-11-04 10:16 ` kernel test robot
2020-11-06 19:35 ` James Morse
2020-11-18 3:12 ` Aili Yao
2020-11-17 9:58 ` [PATCH v2] " Aili Yao
2020-11-18 12:45 ` Borislav Petkov
2020-11-19 5:40 ` Aili Yao
2020-11-19 17:45 ` Borislav Petkov
2020-11-20 3:40 ` Aili Yao
2020-11-20 9:22 ` Aili Yao [this message]
2020-11-20 10:24 ` Borislav Petkov
2021-01-28 12:01 ` Aili Yao
2021-01-28 17:22 ` Luck, Tony
2021-02-23 9:18 ` Aili Yao
2021-02-23 19:32 ` Luck, Tony
2021-02-24 9:56 ` Aili Yao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201120172235.620eb826.yaoaili@kingsoft.com \
--to=yaoaili@kingsoft.com \
--cc=CHENGUOMIN@kingsoft.com \
--cc=bp@alien8.de \
--cc=james.morse@arm.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-edac@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=tony.luck@intel.com \
--cc=yangfeng1@kingsoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox