From: Ben Widawsky <ben.widawsky@intel.com>
To: linux-cxl@vger.kernel.org
Cc: Ben Widawsky <ben.widawsky@intel.com>,
linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org,
ira.weiny@intel.com, vishal.l.verma@intel.com,
alison.schofield@intel.com, dan.j.williams@intel.com,
linux-kernel@vger.kernel.org
Subject: [PATCH 6/7] cxl/mem: Create a helper to setup device regs
Date: Wed, 7 Apr 2021 15:26:24 -0700 [thread overview]
Message-ID: <20210407222625.320177-7-ben.widawsky@intel.com> (raw)
In-Reply-To: <20210407222625.320177-1-ben.widawsky@intel.com>
Memory devices have a list of required register regions within the
register block, but this isn't required of all CXL components or
devices. To make things more tidy, and allow for easily setting up other
block types in this loop, the helper is introduced.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
---
drivers/cxl/mem.c | 38 +++++++++++++++++++++++---------------
1 file changed, 23 insertions(+), 15 deletions(-)
diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
index 49f651694cb0..b7342aaf38c4 100644
--- a/drivers/cxl/mem.c
+++ b/drivers/cxl/mem.c
@@ -974,6 +974,24 @@ static int cxl_mem_dvsec(struct pci_dev *pdev, int dvsec)
return 0;
}
+static int __cxl_setup_device_regs(struct cxl_mem *cxlm, void __iomem *base)
+{
+ struct cxl_regs *regs = &cxlm->regs;
+ struct pci_dev *pdev = cxlm->pdev;
+ struct device *dev = &pdev->dev;
+
+ cxl_setup_device_regs(dev, base, ®s->device_regs);
+ if (!regs->status || !regs->mbox || !regs->memdev) {
+ dev_err(dev, "registers not found: %s%s%s\n",
+ !regs->status ? "status " : "",
+ !regs->mbox ? "mbox " : "",
+ !regs->memdev ? "memdev" : "");
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
/**
* cxl_mem_setup_regs() - Setup necessary MMIO.
* @cxlm: The CXL memory device to communicate with.
@@ -986,12 +1004,11 @@ static int cxl_mem_dvsec(struct pci_dev *pdev, int dvsec)
*/
static int cxl_mem_setup_regs(struct cxl_mem *cxlm)
{
- struct cxl_regs *regs = &cxlm->regs;
struct pci_dev *pdev = cxlm->pdev;
struct device *dev = &pdev->dev;
u32 regloc_size, regblocks;
void __iomem *base;
- int regloc, i;
+ int regloc, i, rc;
regloc = cxl_mem_dvsec(pdev, PCI_DVSEC_ID_CXL_REGLOC_OFFSET);
if (!regloc) {
@@ -1021,23 +1038,14 @@ static int cxl_mem_setup_regs(struct cxl_mem *cxlm)
if (IS_ERR(base))
return PTR_ERR(base);
- cxl_setup_device_regs(dev, base, ®s->device_regs);
- if (!regs->status || !regs->mbox || !regs->memdev) {
- dev_err(dev, "registers not found: %s%s%s\n",
- !regs->status ? "status " : "",
- !regs->mbox ? "mbox " : "",
- !regs->memdev ? "memdev" : "");
- return -ENXIO;
- }
+ rc = __cxl_setup_device_regs(cxlm, base);
+ if (rc)
+ return rc;
+
break;
}
}
- if (i == regblocks) {
- dev_err(dev, "Missing register locator for device registers\n");
- return -ENXIO;
- }
-
return 0;
}
--
2.31.1
next prev parent reply other threads:[~2021-04-07 22:27 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-07 22:26 [PATCH 0/7] Enumerate HDM Decoder registers Ben Widawsky
2021-04-07 22:26 ` [PATCH 1/7] cxl/mem: Use dev instead of pdev->dev Ben Widawsky
2021-04-08 17:08 ` Jonathan Cameron
2021-04-07 22:26 ` [PATCH 2/7] cxl/mem: Split creation from mapping in probe Ben Widawsky
2021-04-08 17:13 ` Jonathan Cameron
2021-04-07 22:26 ` [PATCH 3/7] cxl/mem: Move register locator logic into reg setup Ben Widawsky
2021-04-08 17:27 ` Jonathan Cameron
2021-04-07 22:26 ` [PATCH 4/7] cxl/mem: Get rid of @cxlm.base Ben Widawsky
2021-04-08 17:26 ` Jonathan Cameron
2021-04-13 16:17 ` Ben Widawsky
2021-04-14 9:24 ` Jonathan Cameron
2021-05-20 21:29 ` [PATCH v2 " Ben Widawsky
2021-04-07 22:26 ` [PATCH 5/7] cxl/mem: Move device register setup Ben Widawsky
2021-04-08 17:28 ` Jonathan Cameron
2021-04-07 22:26 ` Ben Widawsky [this message]
2021-04-08 17:33 ` [PATCH 6/7] cxl/mem: Create a helper to setup device regs Jonathan Cameron
2021-04-15 22:54 ` Dan Williams
2021-04-07 22:26 ` [PATCH 7/7] cxl: Add HDM decoder capbilities Ben Widawsky
2021-04-08 17:57 ` Jonathan Cameron
2021-04-15 23:27 ` Dan Williams
2021-04-15 23:50 ` Ben Widawsky
2021-04-16 0:25 ` Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210407222625.320177-7-ben.widawsky@intel.com \
--to=ben.widawsky@intel.com \
--cc=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=ira.weiny@intel.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox