From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: linux-usb@vger.kernel.org
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>,
Michael Jamet <michael.jamet@intel.com>,
Andreas Noever <andreas.noever@gmail.com>,
Lukas Wunner <lukas@wunner.de>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
linux-acpi@vger.kernel.org,
Casey G Bowman <casey.g.bowman@intel.com>,
Rajmohan Mani <rajmohan.mani@intel.com>,
Christian Kellner <ckellner@redhat.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jonathan Corbet <corbet@lwn.net>,
Mika Westerberg <mika.westerberg@linux.intel.com>
Subject: [PATCH 8/9] thunderbolt: Add WRITE_ONLY and AUTHENTICATE_ONLY NVM operations for retimers
Date: Wed, 19 May 2021 17:12:58 +0300 [thread overview]
Message-ID: <20210519141259.84839-9-mika.westerberg@linux.intel.com> (raw)
In-Reply-To: <20210519141259.84839-1-mika.westerberg@linux.intel.com>
From: Rajmohan Mani <rajmohan.mani@intel.com>
The same way we support these two operations for USB4 routers we can
extend the retimer NVM operations to support retimers also.
Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
.../ABI/testing/sysfs-bus-thunderbolt | 2 +-
drivers/thunderbolt/retimer.c | 51 ++++++++++++++-----
drivers/thunderbolt/tb.h | 2 +
drivers/thunderbolt/usb4.c | 15 +++++-
4 files changed, 53 insertions(+), 17 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt
index da580b504c87..95c21d6c9a84 100644
--- a/Documentation/ABI/testing/sysfs-bus-thunderbolt
+++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt
@@ -221,7 +221,7 @@ Description: When new NVM image is written to the non-active NVM
and flush it to the storage area.
- Writing "3" will authenticate the image that is
currently written in the storage area. This is only
- supported with USB4 devices.
+ supported with USB4 devices and retimers.
When read holds status of the last authentication
operation if an error occurred during the process. This
diff --git a/drivers/thunderbolt/retimer.c b/drivers/thunderbolt/retimer.c
index 05af0feefe84..3aa790aa6500 100644
--- a/drivers/thunderbolt/retimer.c
+++ b/drivers/thunderbolt/retimer.c
@@ -103,6 +103,7 @@ static int tb_retimer_nvm_validate_and_write(struct tb_retimer *rt)
unsigned int image_size, hdr_size;
const u8 *buf = rt->nvm->buf;
u16 ds_size, device;
+ int ret;
image_size = rt->nvm->buf_data_size;
if (image_size < NVM_MIN_SIZE || image_size > NVM_MAX_SIZE)
@@ -140,8 +141,25 @@ static int tb_retimer_nvm_validate_and_write(struct tb_retimer *rt)
buf += hdr_size;
image_size -= hdr_size;
- return usb4_port_retimer_nvm_write(rt->port, rt->index, 0, buf,
- image_size);
+ ret = usb4_port_retimer_nvm_write(rt->port, rt->index, 0, buf,
+ image_size);
+ if (!ret)
+ rt->nvm->flushed = true;
+
+ return ret;
+}
+
+static int tb_retimer_nvm_authenticate(struct tb_retimer *rt, bool auth_only)
+{
+ int ret;
+
+ if (auth_only) {
+ ret = usb4_port_retimer_nvm_set_offset(rt->port, rt->index, 0);
+ if (ret)
+ return ret;
+ }
+
+ return usb4_port_retimer_nvm_authenticate(rt->port, rt->index);
}
static ssize_t device_show(struct device *dev, struct device_attribute *attr,
@@ -176,8 +194,7 @@ static ssize_t nvm_authenticate_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct tb_retimer *rt = tb_to_retimer(dev);
- bool val;
- int ret;
+ int val, ret;
pm_runtime_get_sync(&rt->dev);
@@ -191,7 +208,7 @@ static ssize_t nvm_authenticate_store(struct device *dev,
goto exit_unlock;
}
- ret = kstrtobool(buf, &val);
+ ret = kstrtoint(buf, 10, &val);
if (ret)
goto exit_unlock;
@@ -199,16 +216,22 @@ static ssize_t nvm_authenticate_store(struct device *dev,
rt->auth_status = 0;
if (val) {
- if (!rt->nvm->buf) {
- ret = -EINVAL;
- goto exit_unlock;
+ if (val == AUTHENTICATE_ONLY) {
+ ret = tb_retimer_nvm_authenticate(rt, true);
+ } else {
+ if (!rt->nvm->flushed) {
+ if (!rt->nvm->buf) {
+ ret = -EINVAL;
+ goto exit_unlock;
+ }
+
+ ret = tb_retimer_nvm_validate_and_write(rt);
+ if (ret || val == WRITE_ONLY)
+ goto exit_unlock;
+ }
+ if (val == WRITE_AND_AUTHENTICATE)
+ ret = tb_retimer_nvm_authenticate(rt, false);
}
-
- ret = tb_retimer_nvm_validate_and_write(rt);
- if (ret)
- goto exit_unlock;
-
- ret = usb4_port_retimer_nvm_authenticate(rt->port, rt->index);
}
exit_unlock:
diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h
index 53f6bb85b178..725104c83e3d 100644
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -1082,6 +1082,8 @@ int usb4_port_retimer_write(struct tb_port *port, u8 index, u8 reg,
const void *buf, u8 size);
int usb4_port_retimer_is_last(struct tb_port *port, u8 index);
int usb4_port_retimer_nvm_sector_size(struct tb_port *port, u8 index);
+int usb4_port_retimer_nvm_set_offset(struct tb_port *port, u8 index,
+ unsigned int address);
int usb4_port_retimer_nvm_write(struct tb_port *port, u8 index,
unsigned int address, const void *buf,
size_t size);
diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c
index 76d7335aa440..ceddbe7e9f93 100644
--- a/drivers/thunderbolt/usb4.c
+++ b/drivers/thunderbolt/usb4.c
@@ -1513,8 +1513,19 @@ int usb4_port_retimer_nvm_sector_size(struct tb_port *port, u8 index)
return ret ? ret : metadata & USB4_NVM_SECTOR_SIZE_MASK;
}
-static int usb4_port_retimer_nvm_set_offset(struct tb_port *port, u8 index,
- unsigned int address)
+/**
+ * usb4_port_retimer_nvm_set_offset() - Set NVM write offset
+ * @port: USB4 port
+ * @index: Retimer index
+ * @address: Start offset
+ *
+ * Exlicitly sets NVM write offset. Normally when writing to NVM this is
+ * done automatically by usb4_port_retimer_nvm_write().
+ *
+ * Returns %0 in success and negative errno if there was a failure.
+ */
+int usb4_port_retimer_nvm_set_offset(struct tb_port *port, u8 index,
+ unsigned int address)
{
u32 metadata, dwaddress;
int ret;
--
2.30.2
next prev parent reply other threads:[~2021-05-19 14:12 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-19 14:12 [PATCH 0/9] thunderbolt: Offline on-board retimer NVM upgrade support Mika Westerberg
2021-05-19 14:12 ` [PATCH 1/9] thunderbolt: Log the link as TBT instead of TBT3 Mika Westerberg
2021-05-19 14:12 ` [PATCH 2/9] thunderbolt: Add USB4 port devices Mika Westerberg
2021-05-19 15:14 ` Heikki Krogerus
2021-05-19 15:30 ` Heikki Krogerus
2021-05-19 15:40 ` Mika Westerberg
2021-05-20 9:23 ` Heikki Krogerus
2021-05-19 14:12 ` [PATCH 3/9] thunderbolt: Add support for ACPI _DSM to power on/off retimers Mika Westerberg
2021-05-19 14:12 ` [PATCH 4/9] thunderbolt: Add additional USB4 port operations for retimer access Mika Westerberg
2021-05-19 14:12 ` [PATCH 5/9] thunderbolt: Add support for retimer NVM upgrade when there is no link Mika Westerberg
2021-05-19 14:12 ` [PATCH 6/9] thunderbolt: Move nvm_write_ops to tb.h Mika Westerberg
2021-05-19 14:12 ` [PATCH 7/9] thunderbolt: Allow router NVM authenticate separately Mika Westerberg
2021-05-19 14:12 ` Mika Westerberg [this message]
2021-05-19 14:12 ` [PATCH 9/9] thunderbolt: Check for NVM authentication status after the operation started Mika Westerberg
2021-05-20 8:59 ` [PATCH 0/9] thunderbolt: Offline on-board retimer NVM upgrade support Greg Kroah-Hartman
2021-06-01 7:56 ` Mika Westerberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210519141259.84839-9-mika.westerberg@linux.intel.com \
--to=mika.westerberg@linux.intel.com \
--cc=YehezkelShB@gmail.com \
--cc=andreas.noever@gmail.com \
--cc=casey.g.bowman@intel.com \
--cc=ckellner@redhat.com \
--cc=corbet@lwn.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=michael.jamet@intel.com \
--cc=rajmohan.mani@intel.com \
--cc=rjw@rjwysocki.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox