[PATCH v5 2/2] x86/PCI/ACPI: Replace printk calls with pr_info/pr_warn calls

[Hans de Goede <hdegoede@redhat.com>]

The direct use of printk is deprecated, replace the printk calls
in arch/x86/pci/acpi.c with pr_info/pr_warn calls.

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v5:
- Rebase on v5 of:
  "x86/PCI: Ignore E820 reservations for bridge windows on newer systems"
  and send it out as part of a series instead of as a stand-alone patch
- Add Rafael's Acked-by
---
 arch/x86/pci/acpi.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 72d473054262..f357dac92610 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -1,4 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#define pr_fmt(fmt) "PCI: " fmt
+
 #include <linux/pci.h>
 #include <linux/acpi.h>
 #include <linux/init.h>
@@ -38,7 +41,7 @@ static int __init set_nouse_crs(const struct dmi_system_id *id)
 
 static int __init set_ignore_seg(const struct dmi_system_id *id)
 {
-	printk(KERN_INFO "PCI: %s detected: ignoring ACPI _SEG\n", id->ident);
+	pr_info("%s detected: ignoring ACPI _SEG\n", id->ident);
 	pci_ignore_seg = true;
 	return 0;
 }
@@ -158,10 +161,9 @@ void __init pci_acpi_crs_quirks(void)
 	else if (pci_probe & PCI_USE__CRS)
 		pci_use_crs = true;
 
-	printk(KERN_INFO "PCI: %s host bridge windows from ACPI; "
-	       "if necessary, use \"pci=%s\" and report a bug\n",
-	       pci_use_crs ? "Using" : "Ignoring",
-	       pci_use_crs ? "nocrs" : "use_crs");
+	pr_info("%s host bridge windows from ACPI; if necessary, use \"pci=%s\" and report a bug\n",
+		pci_use_crs ? "Using" : "Ignoring",
+		pci_use_crs ? "nocrs" : "use_crs");
 
 	/*
 	 * Some BIOS-es contain a bug where they add addresses which map to
@@ -186,8 +188,8 @@ void __init pci_acpi_crs_quirks(void)
 	else if (pci_probe & PCI_USE_E820)
 		pci_use_e820 = true;
 
-	printk(KERN_INFO "PCI: %s E820 reservations for host bridge windows\n",
-	       pci_use_e820 ? "Using" : "Ignoring");
+	pr_info("%s E820 reservations for host bridge windows\n",
+		pci_use_e820 ? "Using" : "Ignoring");
 }
 
 #ifdef	CONFIG_PCI_MMCONFIG
@@ -362,9 +364,8 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
 		root->segment = domain = 0;
 
 	if (domain && !pci_domains_supported) {
-		printk(KERN_WARNING "pci_bus %04x:%02x: "
-		       "ignored (multiple domains not supported)\n",
-		       domain, busnum);
+		pr_warn("pci_bus %04x:%02x: ignored (multiple domains not supported)\n",
+			domain, busnum);
 		return NULL;
 	}
 
@@ -432,7 +433,7 @@ int __init pci_acpi_init(void)
 	if (acpi_noirq)
 		return -ENODEV;
 
-	printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n");
+	pr_info("Using ACPI for IRQ routing\n");
 	acpi_irq_penalty_init();
 	pcibios_enable_irq = acpi_pci_irq_enable;
 	pcibios_disable_irq = acpi_pci_irq_disable;
@@ -444,7 +445,7 @@ int __init pci_acpi_init(void)
 		 * also do it here in case there are still broken drivers that
 		 * don't use pci_enable_device().
 		 */
-		printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
+		pr_info("Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
 		for_each_pci_dev(dev)
 			acpi_pci_irq_enable(dev);
 	}
-- 
2.31.1