From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: linux-acpi@vger.kernel.org
Cc: linux-media@vger.kernel.org, rafael@kernel.org,
andriy.shevchenko@linux.intel.com,
heikki.krogerus@linux.intel.com
Subject: [PATCH v8 07/10] ACPI: property: Dig "rotation" property for devices with CSI2 _CRS
Date: Wed, 29 Mar 2023 13:09:48 +0300 [thread overview]
Message-ID: <20230329100951.1522322-8-sakari.ailus@linux.intel.com> (raw)
In-Reply-To: <20230329100951.1522322-1-sakari.ailus@linux.intel.com>
Dig "rotation" property value for devices with _CRS CSI2 resource
descriptor. The value comes from _PLD (physical location of device)
object, if it exists for the device.
This way camera sensor drivers that know the "rotation" property do not
need to care about _PLD on ACPI.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/acpi/mipi.c | 17 +++++++++++++++++
include/acpi/acpi_bus.h | 1 +
2 files changed, 18 insertions(+)
diff --git a/drivers/acpi/mipi.c b/drivers/acpi/mipi.c
index 03079f78bd2c..0232cc123ead 100644
--- a/drivers/acpi/mipi.c
+++ b/drivers/acpi/mipi.c
@@ -652,10 +652,12 @@ static void init_port_csi2_remote(struct acpi_device *device,
*/
void acpi_init_swnodes(struct acpi_device *device)
{
+ struct fwnode_handle *fwnode = acpi_fwnode_handle(device);
struct acpi_device_software_nodes *ads;
struct acpi_buffer buffer = { .length = ACPI_ALLOCATE_BUFFER };
acpi_handle handle = acpi_device_handle(device);
struct fwnode_handle *primary;
+ unsigned int prop_index = 0;
acpi_status status;
unsigned int i;
int ret;
@@ -664,6 +666,21 @@ void acpi_init_swnodes(struct acpi_device *device)
if (!ads)
return;
+ /*
+ * Check if "rotation" property exists and if it doesn't but there's a
+ * _PLD object, then get the rotation value from there.
+ */
+ if (!fwnode_property_present(fwnode, "rotation")) {
+ struct acpi_pld_info *pld;
+
+ status = acpi_get_physical_device_location(handle, &pld);
+ if (ACPI_SUCCESS(status)) {
+ ads->dev_props[NEXT_PROPERTY(prop_index, DEV_ROTATION)] =
+ PROPERTY_ENTRY_U32("rotation", pld->rotation * 45U);
+ kfree(pld);
+ }
+ }
+
status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
if (ACPI_FAILURE(status)) {
acpi_handle_warn(handle, "cannot get path name\n");
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 29d1e4d49d0c..83a89797a122 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -361,6 +361,7 @@ struct acpi_device_data {
struct acpi_gpio_mapping;
enum acpi_device_swnode_dev_props {
+ ACPI_DEVICE_SWNODE_DEV_ROTATION,
ACPI_DEVICE_SWNODE_DEV_NUM_OF,
ACPI_DEVICE_SWNODE_DEV_NUM_ENTRIES
};
--
2.30.2
next prev parent reply other threads:[~2023-03-29 10:10 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-29 10:09 [PATCH v8 00/10] ACPI _CRS CSI-2 and MIPI DisCo for Imaging support Sakari Ailus
2023-03-29 10:09 ` [PATCH v8 01/10] ACPI: scan: Remove the second DSDT traversal Sakari Ailus
2023-05-09 18:06 ` Rafael J. Wysocki
2023-05-09 20:49 ` Sakari Ailus
2023-05-11 16:08 ` Rafael J. Wysocki
2023-03-29 10:09 ` [PATCH v8 02/10] ACPI: property: Parse data node string references in properties Sakari Ailus
2023-05-11 17:04 ` Rafael J. Wysocki
2023-05-12 16:04 ` Rafael J. Wysocki
2023-05-16 11:24 ` Sakari Ailus
2023-05-22 15:29 ` Rafael J. Wysocki
2023-05-22 16:28 ` Sakari Ailus
2023-05-22 16:38 ` Rafael J. Wysocki
2023-05-22 20:25 ` Sakari Ailus
2023-05-23 11:21 ` Rafael J. Wysocki
2023-05-23 11:43 ` Sakari Ailus
2023-05-23 13:40 ` Rafael J. Wysocki
2023-03-29 10:09 ` [PATCH v8 03/10] ACPI: property: Parse _CRS CSI-2 descriptor Sakari Ailus
2023-05-15 16:45 ` Rafael J. Wysocki
2023-05-16 8:57 ` Sakari Ailus
2023-05-16 10:12 ` Rafael J. Wysocki
2023-05-16 11:09 ` Sakari Ailus
2023-03-29 10:09 ` [PATCH v8 04/10] device property: Add SOFTWARE_NODE() macro for defining software nodes Sakari Ailus
2023-03-29 10:09 ` [PATCH v8 05/10] ACPI: property: Prepare generating swnodes for ACPI and DisCo for Imaging Sakari Ailus
2023-03-29 14:39 ` Andy Shevchenko
2023-05-17 10:53 ` Rafael J. Wysocki
2023-05-17 11:45 ` Sakari Ailus
2023-05-17 12:22 ` Rafael J. Wysocki
2023-05-17 13:50 ` Rafael J. Wysocki
2023-05-17 17:34 ` Sakari Ailus
2023-03-29 10:09 ` [PATCH v8 06/10] ACPI: scan: Generate software nodes based on MIPI " Sakari Ailus
2023-03-29 10:09 ` Sakari Ailus [this message]
2023-03-29 10:09 ` [PATCH v8 08/10] ACPI: property: Rename parsed MIPI DisCo for Imaging properties Sakari Ailus
2023-05-19 18:34 ` Rafael J. Wysocki
2023-05-19 18:42 ` Sakari Ailus
2023-03-29 10:09 ` [PATCH v8 09/10] ACPI: property: Skip MIPI property table without "mipi-img" prefix Sakari Ailus
2023-03-29 10:09 ` [PATCH v8 10/10] ACPI: property: Document _CRS CSI-2 and DisCo for Imaging support Sakari Ailus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230329100951.1522322-8-sakari.ailus@linux.intel.com \
--to=sakari.ailus@linux.intel.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=rafael@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox