[RFC PATCH 3/6] i2c: aspeed: switch to generic fw properties.

[Jonathan Cameron <Jonathan.Cameron@huawei.com>]

Not tested on device tree but works nicely for ACPI :)

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/i2c/busses/i2c-aspeed.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index 04155c9a50a5..73508fb9dc08 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -18,9 +18,8 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
 
@@ -975,7 +974,6 @@ MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
 
 static int aspeed_i2c_probe_bus(struct platform_device *pdev)
 {
-	const struct of_device_id *match;
 	struct aspeed_i2c_bus *bus;
 	struct clk *parent_clk;
 	int irq, ret;
@@ -1003,7 +1001,7 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev)
 	}
 	reset_control_deassert(bus->rst);
 
-	ret = of_property_read_u32(pdev->dev.of_node,
+	ret = device_property_read_u32(&pdev->dev,
 				   "bus-frequency", &bus->bus_frequency);
 	if (ret < 0) {
 		dev_err(&pdev->dev,
@@ -1011,12 +1009,10 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev)
 		bus->bus_frequency = I2C_MAX_STANDARD_MODE_FREQ;
 	}
 
-	match = of_match_node(aspeed_i2c_bus_of_table, pdev->dev.of_node);
-	if (!match)
+	bus->get_clk_reg_val = (u32 (*)(struct device *, u32))
+		device_get_match_data(&pdev->dev);
+	if (!bus->get_clk_reg_val)
 		bus->get_clk_reg_val = aspeed_i2c_24xx_get_clk_reg_val;
-	else
-		bus->get_clk_reg_val = (u32 (*)(struct device *, u32))
-				match->data;
 
 	/* Initialize the I2C adapter */
 	spin_lock_init(&bus->lock);
-- 
2.39.2