[RFC PATCH v2 6/6] HACK: i2c: aspeed: Comment clock out and make reset optional

[Jonathan Cameron <Jonathan.Cameron@huawei.com>]

Needs tidying up - hopefully can do clock right using ongoing
work from Niyas
https://linaro.atlassian.net/wiki/spaces/CLIENTPC/pages/28832333867/ACPI+Clock+Management

ACPI does not provide an equivalent reset deassert / assert. _RST
doesn't fit that model, so for now make the reset optional.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
v2:
 - Use optional variant for the reset.
 - Left the clock with the hideous hack to keep it obvious that it is
   a hack given no way for us to get the clk rate on ACPI firmware yet
   and I don't want to pretend there is.
---
 drivers/i2c/busses/i2c-aspeed.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index ae8e187f2233..f0b5789aee21 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -986,14 +986,14 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev)
 	if (IS_ERR(bus->base))
 		return PTR_ERR(bus->base);
 
-	parent_clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(parent_clk))
-		return PTR_ERR(parent_clk);
-	bus->parent_clk_frequency = clk_get_rate(parent_clk);
+	//	parent_clk = devm_clk_get(&pdev->dev, NULL);
+	//	if (IS_ERR(parent_clk))//
+	//		return PTR_ERR(parent_clk);
+	bus->parent_clk_frequency = 1000000;//clk_get_rate(parent_clk);
 	/* We just need the clock rate, we don't actually use the clk object. */
-	devm_clk_put(&pdev->dev, parent_clk);
+	//devm_clk_put(&pdev->dev, parent_clk);
 
-	bus->rst = devm_reset_control_get_shared(&pdev->dev, NULL);
+	bus->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
 	if (IS_ERR(bus->rst)) {
 		dev_err(&pdev->dev,
 			"missing or invalid reset controller device tree entry\n");
-- 
2.39.2