From: Jonathan Cameron <jic23@kernel.org>
To: linux-iio@vger.kernel.org, Rob Herring <robh@kernel.org>,
Frank Rowand <frowand.list@gmail.com>,
linux-kernel@vger.kernel.org,
Julia Lawall <Julia.Lawall@inria.fr>
Cc: "Peter Zijlstra" <peterz@infradead.org>,
"Nicolas Palix" <nicolas.palix@imag.fr>,
"Sumera Priyadarsini" <sylphrenadin@gmail.com>,
"Rafael J . Wysocki" <rafael@kernel.org>,
"Len Brown" <lenb@kernel.org>,
linux-acpi@vger.kernel.org,
"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Nuno Sá" <nuno.sa@analog.com>,
"Jonathan Cameron" <Jonathan.Cameron@huawei.com>
Subject: [PATCH 4/8] iio: adc: fsl-imx25-gcq: Use for_each_available_child_node_scoped()
Date: Sun, 11 Feb 2024 17:42:32 +0000 [thread overview]
Message-ID: <20240211174237.182947-5-jic23@kernel.org> (raw)
In-Reply-To: <20240211174237.182947-1-jic23@kernel.org>
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Using automated cleanup reduces chance of an reference count leak
and simplfies the code.
Child nodes should only ever have been considered if they were available
(either status is okay, or it is not defined).
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
drivers/iio/adc/fsl-imx25-gcq.c | 13 +++----------
1 file changed, 3 insertions(+), 10 deletions(-)
diff --git a/drivers/iio/adc/fsl-imx25-gcq.c b/drivers/iio/adc/fsl-imx25-gcq.c
index 68c813de0605..1b0003230306 100644
--- a/drivers/iio/adc/fsl-imx25-gcq.c
+++ b/drivers/iio/adc/fsl-imx25-gcq.c
@@ -199,7 +199,6 @@ static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
struct mx25_gcq_priv *priv)
{
struct device_node *np = pdev->dev.of_node;
- struct device_node *child;
struct device *dev = &pdev->dev;
int ret, i;
@@ -216,7 +215,7 @@ static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
MX25_ADCQ_CFG_IN(i) |
MX25_ADCQ_CFG_REFN_NGND2);
- for_each_child_of_node(np, child) {
+ for_each_available_child_of_node_scoped(np, child) {
u32 reg;
u32 refp = MX25_ADCQ_CFG_REFP_INT;
u32 refn = MX25_ADCQ_CFG_REFN_NGND2;
@@ -224,14 +223,12 @@ static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
ret = of_property_read_u32(child, "reg", ®);
if (ret) {
dev_err(dev, "Failed to get reg property\n");
- of_node_put(child);
return ret;
}
if (reg >= MX25_NUM_CFGS) {
dev_err(dev,
"reg value is greater than the number of available configuration registers\n");
- of_node_put(child);
return -EINVAL;
}
@@ -243,10 +240,9 @@ static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
case MX25_ADC_REFP_XP:
case MX25_ADC_REFP_YP:
ret = mx25_gcq_ext_regulator_setup(&pdev->dev, priv, refp);
- if (ret) {
- of_node_put(child);
+ if (ret)
return ret;
- }
+
priv->channel_vref_mv[reg] =
regulator_get_voltage(priv->vref[refp]);
/* Conversion from uV to mV */
@@ -257,7 +253,6 @@ static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
break;
default:
dev_err(dev, "Invalid positive reference %d\n", refp);
- of_node_put(child);
return -EINVAL;
}
@@ -270,12 +265,10 @@ static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
if ((refp & MX25_ADCQ_CFG_REFP_MASK) != refp) {
dev_err(dev, "Invalid fsl,adc-refp property value\n");
- of_node_put(child);
return -EINVAL;
}
if ((refn & MX25_ADCQ_CFG_REFN_MASK) != refn) {
dev_err(dev, "Invalid fsl,adc-refn property value\n");
- of_node_put(child);
return -EINVAL;
}
--
2.43.1
next prev parent reply other threads:[~2024-02-11 17:43 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-11 17:42 [PATCH 0/8] of: automate of_node_put() - new approach to loops Jonathan Cameron
2024-02-11 17:42 ` [PATCH 1/8] of: Add cleanup.h based auto release via __free(device_node) markings Jonathan Cameron
2024-02-11 17:42 ` [PATCH 2/8] of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling Jonathan Cameron
2024-02-12 8:20 ` Julia Lawall
2024-02-12 11:37 ` Jonathan Cameron
2024-02-11 17:42 ` [PATCH 3/8] of: unittest: Use for_each_child_of_node_scoped() Jonathan Cameron
2024-02-11 17:42 ` Jonathan Cameron [this message]
2024-02-11 17:42 ` [PATCH 5/8] iio: adc: rcar-gyroadc: use for_each_available_child_node_scoped() Jonathan Cameron
2024-02-11 17:42 ` [PATCH 6/8] iio: adc: ad7124: Use for_each_available_child_of_node_scoped() Jonathan Cameron
2024-02-11 17:42 ` [PATCH 7/8] iio: adc: ad7292: " Jonathan Cameron
2024-02-11 17:42 ` [PATCH 8/8] iio: adc: adi-axi-adc: Use __free(device_node) and guard(mutex) Jonathan Cameron
2024-02-12 12:03 ` [PATCH 0/8] of: automate of_node_put() - new approach to loops Andy Shevchenko
2024-02-16 14:47 ` Jonathan Cameron
2024-02-16 15:25 ` Andy Shevchenko
2024-02-23 9:13 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240211174237.182947-5-jic23@kernel.org \
--to=jic23@kernel.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=Julia.Lawall@inria.fr \
--cc=andriy.shevchenko@linux.intel.com \
--cc=frowand.list@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.palix@imag.fr \
--cc=nuno.sa@analog.com \
--cc=peterz@infradead.org \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=sylphrenadin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox