From: Jonathan Cameron <jic23@kernel.org>
To: linux-iio@vger.kernel.org, Rob Herring <robh@kernel.org>,
Frank Rowand <frowand.list@gmail.com>,
linux-kernel@vger.kernel.org,
Julia Lawall <Julia.Lawall@inria.fr>
Cc: "Peter Zijlstra" <peterz@infradead.org>,
"Nicolas Palix" <nicolas.palix@imag.fr>,
"Sumera Priyadarsini" <sylphrenadin@gmail.com>,
"Rafael J . Wysocki" <rafael@kernel.org>,
"Len Brown" <lenb@kernel.org>,
linux-acpi@vger.kernel.org,
"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Nuno Sá" <nuno.sa@analog.com>,
"Jonathan Cameron" <Jonathan.Cameron@huawei.com>
Subject: [PATCH 5/8] iio: adc: rcar-gyroadc: use for_each_available_child_node_scoped()
Date: Sun, 11 Feb 2024 17:42:33 +0000 [thread overview]
Message-ID: <20240211174237.182947-6-jic23@kernel.org> (raw)
In-Reply-To: <20240211174237.182947-1-jic23@kernel.org>
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Using automated cleanup to replace of_node_put() handling allows for
a simplfied flow by enabling direct returns on errors.
Non available child nodes should never have been considered; that
is ones where status != okay and was defined.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
drivers/iio/adc/rcar-gyroadc.c | 21 ++++++---------------
1 file changed, 6 insertions(+), 15 deletions(-)
diff --git a/drivers/iio/adc/rcar-gyroadc.c b/drivers/iio/adc/rcar-gyroadc.c
index d524f2e8e927..15a21d2860e7 100644
--- a/drivers/iio/adc/rcar-gyroadc.c
+++ b/drivers/iio/adc/rcar-gyroadc.c
@@ -318,7 +318,6 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
struct rcar_gyroadc *priv = iio_priv(indio_dev);
struct device *dev = priv->dev;
struct device_node *np = dev->of_node;
- struct device_node *child;
struct regulator *vref;
unsigned int reg;
unsigned int adcmode = -1, childmode;
@@ -326,7 +325,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
unsigned int num_channels;
int ret, first = 1;
- for_each_child_of_node(np, child) {
+ for_each_available_child_of_node_scoped(np, child) {
of_id = of_match_node(rcar_gyroadc_child_match, child);
if (!of_id) {
dev_err(dev, "Ignoring unsupported ADC \"%pOFn\".",
@@ -352,7 +351,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
num_channels = ARRAY_SIZE(rcar_gyroadc_iio_channels_3);
break;
default:
- goto err_e_inval;
+ return -EINVAL;
}
/*
@@ -369,7 +368,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
dev_err(dev,
"Failed to get child reg property of ADC \"%pOFn\".\n",
child);
- goto err_of_node_put;
+ return ret;
}
/* Channel number is too high. */
@@ -377,7 +376,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
dev_err(dev,
"Only %i channels supported with %pOFn, but reg = <%i>.\n",
num_channels, child, reg);
- goto err_e_inval;
+ return -EINVAL;
}
}
@@ -386,7 +385,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
dev_err(dev,
"Channel %i uses different ADC mode than the rest.\n",
reg);
- goto err_e_inval;
+ return -EINVAL;
}
/* Channel is valid, grab the regulator. */
@@ -396,8 +395,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
if (IS_ERR(vref)) {
dev_dbg(dev, "Channel %i 'vref' supply not connected.\n",
reg);
- ret = PTR_ERR(vref);
- goto err_of_node_put;
+ return PTR_ERR(vref);
}
priv->vref[reg] = vref;
@@ -422,7 +420,6 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
* we can stop parsing here.
*/
if (childmode == RCAR_GYROADC_MODE_SELECT_1_MB88101A) {
- of_node_put(child);
break;
}
}
@@ -433,12 +430,6 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
}
return 0;
-
-err_e_inval:
- ret = -EINVAL;
-err_of_node_put:
- of_node_put(child);
- return ret;
}
static void rcar_gyroadc_deinit_supplies(struct iio_dev *indio_dev)
--
2.43.1
next prev parent reply other threads:[~2024-02-11 17:43 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-11 17:42 [PATCH 0/8] of: automate of_node_put() - new approach to loops Jonathan Cameron
2024-02-11 17:42 ` [PATCH 1/8] of: Add cleanup.h based auto release via __free(device_node) markings Jonathan Cameron
2024-02-11 17:42 ` [PATCH 2/8] of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling Jonathan Cameron
2024-02-12 8:20 ` Julia Lawall
2024-02-12 11:37 ` Jonathan Cameron
2024-02-11 17:42 ` [PATCH 3/8] of: unittest: Use for_each_child_of_node_scoped() Jonathan Cameron
2024-02-11 17:42 ` [PATCH 4/8] iio: adc: fsl-imx25-gcq: Use for_each_available_child_node_scoped() Jonathan Cameron
2024-02-11 17:42 ` Jonathan Cameron [this message]
2024-02-11 17:42 ` [PATCH 6/8] iio: adc: ad7124: Use for_each_available_child_of_node_scoped() Jonathan Cameron
2024-02-11 17:42 ` [PATCH 7/8] iio: adc: ad7292: " Jonathan Cameron
2024-02-11 17:42 ` [PATCH 8/8] iio: adc: adi-axi-adc: Use __free(device_node) and guard(mutex) Jonathan Cameron
2024-02-12 12:03 ` [PATCH 0/8] of: automate of_node_put() - new approach to loops Andy Shevchenko
2024-02-16 14:47 ` Jonathan Cameron
2024-02-16 15:25 ` Andy Shevchenko
2024-02-23 9:13 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240211174237.182947-6-jic23@kernel.org \
--to=jic23@kernel.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=Julia.Lawall@inria.fr \
--cc=andriy.shevchenko@linux.intel.com \
--cc=frowand.list@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.palix@imag.fr \
--cc=nuno.sa@analog.com \
--cc=peterz@infradead.org \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=sylphrenadin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox