Re: [PATCH v3 3/3] lib/firmware_table: Provide buffer length argument to cdat_table_parse()

[Jonathan Cameron <Jonathan.Cameron@Huawei.com>]

On Fri, 9 Feb 2024 20:26:47 +0100
Robert Richter <rrichter@amd.com> wrote:

> There exists card implementations with a CDAT table using a fix
There exist ... fixed size buffer,
> buffer, but with entries filled in that do not fill the whole table
> length size. Then, the last entry in the CDAT table may not mark the
> end of the CDAT table buffer specified by the length field in the CDAT
> header. It can be shorter with trailing unused (zero'ed) data. The
> actual table length is determined while reading all CDAT entries of
> the table with DOE.
> 
> If the table is greater than expected (containing zero'ed trailing
> data), the CDAT parser fails with:
> 
>  [   48.691717] Malformed DSMAS table length: (24:0)
>  [   48.702084] [CDAT:0x00] Invalid zero length
>  [   48.711460] cxl_port endpoint1: Failed to parse CDAT: -22
> 
> In addition, a check of the table buffer length is missing to prevent
> an out-of-bound access then parsing the CDAT table.
> 
> Hardening code against device returning borked table. Fix that by
> providing an optional buffer length argument to
> acpi_parse_entries_array() that can be used by cdat_table_parse() to
> propagate the buffer size down to its users to check the buffer
> length. This also prevents a possible out-of-bound access mentioned.
> 
> Cc: "Rafael J. Wysocki" <rafael@kernel.org>
> Cc: Len Brown <lenb@kernel.org>
> Signed-off-by: Robert Richter <rrichter@amd.com>
> Reviewed-by: Dave Jiang <dave.jiang@intel.com>

I think we should scream a bit about this if we see it
as I'm unconvinced the spec allows for an implementation like this.

If the spec is unclear, lets seek a clarification.

I'm fine with this as a defensive measure, I just don't want
device vendors to keep doing it! 

Jonathan


> ---
>  drivers/acpi/tables.c    |  2 +-
>  drivers/cxl/core/cdat.c  |  6 +++---
>  include/linux/fw_table.h |  4 +++-
>  lib/fw_table.c           | 15 ++++++++++-----
>  4 files changed, 17 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
> index b07f7d091d13..b976e5fc3fbc 100644
> --- a/drivers/acpi/tables.c
> +++ b/drivers/acpi/tables.c
> @@ -253,7 +253,7 @@ int __init_or_acpilib acpi_table_parse_entries_array(
>  
>  	count = acpi_parse_entries_array(id, table_size,
>  					 (union fw_table_header *)table_header,
> -					 proc, proc_num, max_entries);
> +					 0, proc, proc_num, max_entries);
>  
>  	acpi_put_table(table_header);
>  	return count;
> diff --git a/drivers/cxl/core/cdat.c b/drivers/cxl/core/cdat.c
> index 6fe11546889f..012d8f2a7945 100644
> --- a/drivers/cxl/core/cdat.c
> +++ b/drivers/cxl/core/cdat.c
> @@ -149,13 +149,13 @@ static int cxl_cdat_endpoint_process(struct cxl_port *port,
>  	int rc;
>  
>  	rc = cdat_table_parse(ACPI_CDAT_TYPE_DSMAS, cdat_dsmas_handler,
> -			      dsmas_xa, port->cdat.table);
> +			      dsmas_xa, port->cdat.table, port->cdat.length);
>  	rc = cdat_table_parse_output(rc);
>  	if (rc)
>  		return rc;
>  
>  	rc = cdat_table_parse(ACPI_CDAT_TYPE_DSLBIS, cdat_dslbis_handler,
> -			      dsmas_xa, port->cdat.table);
> +			      dsmas_xa, port->cdat.table, port->cdat.length);
>  	return cdat_table_parse_output(rc);
>  }
>  
> @@ -511,7 +511,7 @@ void cxl_switch_parse_cdat(struct cxl_port *port)
>  		return;
>  
>  	rc = cdat_table_parse(ACPI_CDAT_TYPE_SSLBIS, cdat_sslbis_handler,
> -			      port, port->cdat.table);
> +			      port, port->cdat.table, port->cdat.length);
>  	rc = cdat_table_parse_output(rc);
>  	if (rc)
>  		dev_dbg(&port->dev, "Failed to parse SSLBIS: %d\n", rc);
> diff --git a/include/linux/fw_table.h b/include/linux/fw_table.h
> index 95421860397a..3ff4c277296f 100644
> --- a/include/linux/fw_table.h
> +++ b/include/linux/fw_table.h
> @@ -40,12 +40,14 @@ union acpi_subtable_headers {
>  
>  int acpi_parse_entries_array(char *id, unsigned long table_size,
>  			     union fw_table_header *table_header,
> +			     unsigned long max_length,
>  			     struct acpi_subtable_proc *proc,
>  			     int proc_num, unsigned int max_entries);
>  
>  int cdat_table_parse(enum acpi_cdat_type type,
>  		     acpi_tbl_entry_handler_arg handler_arg, void *arg,
> -		     struct acpi_table_cdat *table_header);
> +		     struct acpi_table_cdat *table_header,
> +		     unsigned long length);
>  
>  /* CXL is the only non-ACPI consumer of the FIRMWARE_TABLE library */
>  #if IS_ENABLED(CONFIG_ACPI) && !IS_ENABLED(CONFIG_CXL_BUS)
> diff --git a/lib/fw_table.c b/lib/fw_table.c
> index c3569d2ba503..16291814450e 100644
> --- a/lib/fw_table.c
> +++ b/lib/fw_table.c
> @@ -127,6 +127,7 @@ static __init_or_fwtbl_lib int call_handler(struct acpi_subtable_proc *proc,
>   *
>   * @id: table id (for debugging purposes)
>   * @table_size: size of the root table
> + * @max_length: maximum size of the table (ignore if 0)
>   * @table_header: where does the table start?
>   * @proc: array of acpi_subtable_proc struct containing entry id
>   *        and associated handler with it
> @@ -148,18 +149,21 @@ static __init_or_fwtbl_lib int call_handler(struct acpi_subtable_proc *proc,
>  int __init_or_fwtbl_lib
>  acpi_parse_entries_array(char *id, unsigned long table_size,
>  			 union fw_table_header *table_header,
> +			 unsigned long max_length,
>  			 struct acpi_subtable_proc *proc,
>  			 int proc_num, unsigned int max_entries)
>  {
> -	unsigned long table_end, subtable_len, entry_len;
> +	unsigned long table_len, table_end, subtable_len, entry_len;
>  	struct acpi_subtable_entry entry;
>  	enum acpi_subtable_type type;
>  	int count = 0;
>  	int i;
>  
>  	type = acpi_get_subtable_type(id);
> -	table_end = (unsigned long)table_header +
> -		    acpi_table_get_length(type, table_header);
> +	table_len = acpi_table_get_length(type, table_header);
> +	if (max_length && max_length < table_len)
> +		table_len = max_length;
	if (max_length)
		table_len = min(max_length, table_len);

> +	table_end = (unsigned long)table_header + table_len;
>  
>  	/* Parse all entries looking for a match. */
>  
> @@ -208,7 +212,8 @@ int __init_or_fwtbl_lib
>  cdat_table_parse(enum acpi_cdat_type type,
>  		 acpi_tbl_entry_handler_arg handler_arg,
>  		 void *arg,
> -		 struct acpi_table_cdat *table_header)
> +		 struct acpi_table_cdat *table_header,
> +		 unsigned long length)
>  {
>  	struct acpi_subtable_proc proc = {
>  		.id		= type,
> @@ -222,6 +227,6 @@ cdat_table_parse(enum acpi_cdat_type type,
>  	return acpi_parse_entries_array(ACPI_SIG_CDAT,
>  					sizeof(struct acpi_table_cdat),
>  					(union fw_table_header *)table_header,
> -					&proc, 1, 0);
> +					length, &proc, 1, 0);
>  }
>  EXPORT_SYMBOL_FWTBL_LIB(cdat_table_parse);