From: Hans de Goede <hdegoede@redhat.com>
To: "Rafael J . Wysocki" <rafael@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>,
Andy Shevchenko <andy@kernel.org>,
linux-acpi@vger.kernel.org
Subject: [RFC 1/2] ACPI: x86: Move acpi_quirk_skip_serdev_enumeration() out of CONFIG_X86_ANDROID_TABLETS
Date: Sun, 18 Feb 2024 16:15:32 +0100 [thread overview]
Message-ID: <20240218151533.5720-2-hdegoede@redhat.com> (raw)
In-Reply-To: <20240218151533.5720-1-hdegoede@redhat.com>
Some recent(ish) Dell AIO devices have a backlight controller board
connected to an UART.
This UART has a DELL0501 HID with CID set to PNP0501 so that the UART is
still handled by 8250_pnp.c. Unfortunately there is no separate ACPI device
with an UartSerialBusV2() resource to model the backlight-controller.
The next patch in this series will use acpi_quirk_skip_serdev_enumeration()
to still create a serdev for this for a backlight driver to bind to
instead of creating a /dev/ttyS0.
This new acpi_quirk_skip_serdev_enumeration() use is not limited to Android
X86 tablets, so move it out of the ifdef CONFIG_X86_ANDROID_TABLETS block.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/acpi/x86/utils.c | 18 ++++++++++++++----
include/acpi/acpi_bus.h | 22 +++++++++++-----------
2 files changed, 25 insertions(+), 15 deletions(-)
diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index b37a4f44d05f..185176a521ad 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -437,7 +437,7 @@ bool acpi_quirk_skip_i2c_client_enumeration(struct acpi_device *adev)
}
EXPORT_SYMBOL_GPL(acpi_quirk_skip_i2c_client_enumeration);
-int acpi_quirk_skip_serdev_enumeration(struct device *controller_parent, bool *skip)
+static int acpi_dmi_skip_serdev_enumeration(struct device *controller_parent, bool *skip)
{
struct acpi_device *adev = ACPI_COMPANION(controller_parent);
const struct dmi_system_id *dmi_id;
@@ -445,8 +445,6 @@ int acpi_quirk_skip_serdev_enumeration(struct device *controller_parent, bool *s
u64 uid;
int ret;
- *skip = false;
-
ret = acpi_dev_uid_to_integer(adev, &uid);
if (ret)
return 0;
@@ -472,7 +470,6 @@ int acpi_quirk_skip_serdev_enumeration(struct device *controller_parent, bool *s
return 0;
}
-EXPORT_SYMBOL_GPL(acpi_quirk_skip_serdev_enumeration);
bool acpi_quirk_skip_gpio_event_handlers(void)
{
@@ -487,8 +484,21 @@ bool acpi_quirk_skip_gpio_event_handlers(void)
return (quirks & ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS);
}
EXPORT_SYMBOL_GPL(acpi_quirk_skip_gpio_event_handlers);
+#else
+static int acpi_dmi_skip_serdev_enumeration(struct device *controller_parent, bool *skip)
+{
+ return 0;
+}
#endif
+int acpi_quirk_skip_serdev_enumeration(struct device *controller_parent, bool *skip)
+{
+ *skip = false;
+
+ return acpi_dmi_skip_serdev_enumeration(controller_parent, skip);
+}
+EXPORT_SYMBOL_GPL(acpi_quirk_skip_serdev_enumeration);
+
/* Lists of PMIC ACPI HIDs with an (often better) native charger driver */
static const struct {
const char *hid;
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index e4d24d3f9abb..446225aada50 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -749,6 +749,7 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s
bool acpi_quirk_skip_acpi_ac_and_battery(void);
int acpi_install_cmos_rtc_space_handler(acpi_handle handle);
void acpi_remove_cmos_rtc_space_handler(acpi_handle handle);
+int acpi_quirk_skip_serdev_enumeration(struct device *controller_parent, bool *skip);
#else
static inline bool acpi_device_override_status(struct acpi_device *adev,
unsigned long long *status)
@@ -766,23 +767,22 @@ static inline int acpi_install_cmos_rtc_space_handler(acpi_handle handle)
static inline void acpi_remove_cmos_rtc_space_handler(acpi_handle handle)
{
}
-#endif
-
-#if IS_ENABLED(CONFIG_X86_ANDROID_TABLETS)
-bool acpi_quirk_skip_i2c_client_enumeration(struct acpi_device *adev);
-int acpi_quirk_skip_serdev_enumeration(struct device *controller_parent, bool *skip);
-bool acpi_quirk_skip_gpio_event_handlers(void);
-#else
-static inline bool acpi_quirk_skip_i2c_client_enumeration(struct acpi_device *adev)
-{
- return false;
-}
static inline int
acpi_quirk_skip_serdev_enumeration(struct device *controller_parent, bool *skip)
{
*skip = false;
return 0;
}
+#endif
+
+#if IS_ENABLED(CONFIG_X86_ANDROID_TABLETS)
+bool acpi_quirk_skip_i2c_client_enumeration(struct acpi_device *adev);
+bool acpi_quirk_skip_gpio_event_handlers(void);
+#else
+static inline bool acpi_quirk_skip_i2c_client_enumeration(struct acpi_device *adev)
+{
+ return false;
+}
static inline bool acpi_quirk_skip_gpio_event_handlers(void)
{
return false;
--
2.43.0
next prev parent reply other threads:[~2024-02-18 15:15 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-18 15:15 [RFC 0/2] ACPI: Adding new acpi_driver type drivers ? Hans de Goede
2024-02-18 15:15 ` Hans de Goede [this message]
2024-02-18 18:39 ` [RFC 1/2] ACPI: x86: Move acpi_quirk_skip_serdev_enumeration() out of CONFIG_X86_ANDROID_TABLETS Andy Shevchenko
2024-02-19 10:19 ` Hans de Goede
2024-02-18 15:15 ` [RFC 2/2] ACPI: x86: Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration() Hans de Goede
2024-02-22 10:10 ` [RFC 0/2] ACPI: Adding new acpi_driver type drivers ? Rafael J. Wysocki
2024-04-24 8:04 ` Kai-Heng Feng
2024-04-24 9:58 ` Hans de Goede
2024-05-08 4:42 ` Kai-Heng Feng
2024-05-08 9:43 ` Andy Shevchenko
2024-05-08 10:41 ` Kai-Heng Feng
2024-05-12 15:55 ` Hans de Goede
2024-05-12 15:58 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240218151533.5720-2-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=andy@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=rafael@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox