Re: [PATCH v3 0/3] Parse the HEST PCIe AER and set to relevant registers

[Bjorn Helgaas <helgaas@kernel.org>]

On Thu, Jul 18, 2024 at 02:24:02PM +0800, LeoLiu-oc wrote:
> From: LeoLiuoc <LeoLiu-oc@zhaoxin.com>
> 
> According to the Section 18.3.2.4, 18.3.2.5 and 18.3.2.6 in ACPI SPEC
> r6.5, the register value form HEST PCI Express AER Structure should be
> written to relevant PCIe Device's AER Capabilities. So the purpose of the
> patch set is to extract register value from HEST PCI Express AER
> structures and program them into PCIe Device's AER registers.
> Refer to the ACPI SPEC r6.5 for the more detailed description. This patch
> is an effective supplement to _HPP/_HPX method when the Firmware does not
> support the _HPP/_HPX method and can be specially configured for the AER
> register of the specific device.

Just to close the loop on this, I'm assuming you'll rebase to
v6.11-rc1, fix the warnings from the robot, address Yazen's comment
and post a v4.

> v1->v2:
> - Move the definition of structure "hest_parse_aer_info" to file apei.h.
> 
> v2->v3:
> - The applicable hardware for this patch is added to the commit
>   information.
> - Change the function name "program_hest_aer_endpoint" to
>   "program_hest_aer_common".
> - Add the comment to function "program_hest_aer_common".
> - Remove the "PCI_EXP_TYPE_PCIE_BRIDGE" branch handling in function
>   "program_hest_aer_params".
> 
> LeoLiuoc (3):
>   ACPI/APEI: Add hest_parse_pcie_aer()
>   PCI: Add AER bits #defines for PCIe to PCI/PCI-X Bridge
>   PCI/ACPI: Add pci_acpi_program_hest_aer_params()
> 
>  drivers/acpi/apei/hest.c      |  66 +++++++++++++++++++++-
>  drivers/pci/pci-acpi.c        | 101 ++++++++++++++++++++++++++++++++++
>  drivers/pci/pci.h             |   9 +++
>  drivers/pci/probe.c           |   1 +
>  include/acpi/apei.h           |  17 ++++++
>  include/uapi/linux/pci_regs.h |   3 +
>  6 files changed, 195 insertions(+), 2 deletions(-)
> 
> -- 
> 2.34.1
>