From: Anshuman Gupta <anshuman.gupta@intel.com>
To: intel-xe@lists.freedesktop.org, linux-acpi@vger.kernel.org,
linux-pci@vger.kernel.org
Cc: rafael@kernel.org, lenb@kernel.org, bhelgaas@google.com,
ilpo.jarvinen@linux.intel.com, lucas.demarchi@intel.com,
rodrigo.vivi@intel.com, badal.nilawar@intel.com,
anshuman.gupta@intel.com, varun.gupta@intel.com,
ville.syrjala@linux.intel.com, uma.shankar@intel.com
Subject: [PATCH 11/12] drm/xe/vrsr: Enable VRSR
Date: Tue, 1 Apr 2025 21:02:24 +0530 [thread overview]
Message-ID: <20250401153225.96379-12-anshuman.gupta@intel.com> (raw)
In-Reply-To: <20250401153225.96379-1-anshuman.gupta@intel.com>
Enabling VRSR in runtime suspend and also in System wide suspend.
Also fix couple of typo in xe_pm.c.
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
---
drivers/gpu/drm/xe/xe_pci.c | 4 +--
drivers/gpu/drm/xe/xe_pm.c | 51 +++++++++++++++++++++++++++----------
2 files changed, 39 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/xe/xe_pci.c b/drivers/gpu/drm/xe/xe_pci.c
index fa2d43395129..3317d475be79 100644
--- a/drivers/gpu/drm/xe/xe_pci.c
+++ b/drivers/gpu/drm/xe/xe_pci.c
@@ -925,7 +925,7 @@ static int xe_pci_suspend(struct device *dev)
/*
* Enabling D3Cold is needed for S2Idle/S0ix.
- * It is save to allow here since xe_pm_suspend has evicted
+ * It is safe to allow here since xe_pm_suspend has evicted
* the local memory and the direct complete optimization is disabled.
*/
d3cold_toggle(pdev, D3COLD_ENABLE);
@@ -942,7 +942,7 @@ static int xe_pci_resume(struct device *dev)
struct pci_dev *pdev = to_pci_dev(dev);
int err;
- /* Give back the D3Cold decision to the runtime P M*/
+ /* Give back the D3Cold decision to the runtime PM */
d3cold_toggle(pdev, D3COLD_DISABLE);
err = pci_set_power_state(pdev, PCI_D0);
diff --git a/drivers/gpu/drm/xe/xe_pm.c b/drivers/gpu/drm/xe/xe_pm.c
index 5db9313ae269..41b59c8b31b3 100644
--- a/drivers/gpu/drm/xe/xe_pm.c
+++ b/drivers/gpu/drm/xe/xe_pm.c
@@ -151,7 +151,7 @@ static void xe_rpm_lockmap_release(const struct xe_device *xe)
static void xe_pm_suspend_prepare(struct xe_device *xe)
{
if (pm_suspend_target_state == PM_SUSPEND_TO_IDLE)
- xe_pm_d3cold_allowed_toggle(xe);
+ xe_pm_d3cold_target_state_toggle(xe);
else
xe->d3cold.target_state = XE_D3COLD_OFF;
}
@@ -182,10 +182,12 @@ int xe_pm_suspend(struct xe_device *xe)
xe_display_pm_suspend(xe);
- /* FIXME: Super racey... */
- err = xe_bo_evict_all(xe);
- if (err)
- goto err_pxp;
+ if (xe->d3cold.target_state == XE_D3COLD_OFF) {
+ /* FIXME: Super racey... */
+ err = xe_bo_evict_all(xe);
+ if (err)
+ goto err_pxp;
+ }
for_each_gt(gt, xe, id) {
err = xe_gt_suspend(gt);
@@ -197,6 +199,12 @@ int xe_pm_suspend(struct xe_device *xe)
xe_display_pm_suspend_late(xe);
+ if (xe->d3cold.target_state == XE_D3COLD_VRSR) {
+ err = xe_pm_vrsr_enable(xe, true);
+ if (err)
+ goto err_display;
+ }
+
drm_dbg(&xe->drm, "Device suspended\n");
return 0;
@@ -238,9 +246,11 @@ int xe_pm_resume(struct xe_device *xe)
* This only restores pinned memory which is the memory required for the
* GT(s) to resume.
*/
- err = xe_bo_restore_kernel(xe);
- if (err)
- goto err;
+ if (xe->d3cold.target_state == XE_D3COLD_OFF) {
+ err = xe_bo_restore_kernel(xe);
+ if (err)
+ goto err;
+ }
xe_irq_resume(xe);
@@ -249,9 +259,11 @@ int xe_pm_resume(struct xe_device *xe)
xe_display_pm_resume(xe);
- err = xe_bo_restore_user(xe);
- if (err)
- goto err;
+ if (xe->d3cold.target_state == XE_D3COLD_OFF) {
+ err = xe_bo_restore_user(xe);
+ if (err)
+ goto err;
+ }
xe_pxp_pm_resume(xe->pxp);
@@ -595,7 +607,7 @@ int xe_pm_runtime_suspend(struct xe_device *xe)
xe_display_pm_runtime_suspend(xe);
- if (xe->d3cold.target_state) {
+ if (xe->d3cold.target_state == XE_D3COLD_OFF) {
err = xe_bo_evict_all(xe);
if (err)
goto out_resume;
@@ -611,6 +623,14 @@ int xe_pm_runtime_suspend(struct xe_device *xe)
xe_display_pm_runtime_suspend_late(xe);
+ if (xe->d3cold.target_state == XE_D3COLD_VRSR) {
+ err = xe_pm_vrsr_enable(xe, true);
+ if (err) {
+ drm_err(&xe->drm, "Failed to enable VRSR: %d\n", err);
+ goto out_resume;
+ }
+ }
+
xe_rpm_lockmap_release(xe);
xe_pm_write_callback_task(xe, NULL);
return 0;
@@ -642,7 +662,7 @@ int xe_pm_runtime_resume(struct xe_device *xe)
xe_rpm_lockmap_acquire(xe);
- if (xe->d3cold.target_state) {
+ if (xe->d3cold.target_state == XE_D3COLD_OFF) {
err = xe_pcode_ready(xe, true);
if (err)
goto out;
@@ -658,6 +678,9 @@ int xe_pm_runtime_resume(struct xe_device *xe)
goto out;
}
+ if (xe->d3cold.target_state == XE_D3COLD_VRSR)
+ xe_display_pm_resume_early(xe);
+
xe_irq_resume(xe);
for_each_gt(gt, xe, id)
@@ -665,7 +688,7 @@ int xe_pm_runtime_resume(struct xe_device *xe)
xe_display_pm_runtime_resume(xe);
- if (xe->d3cold.target_state) {
+ if (xe->d3cold.target_state == XE_D3COLD_OFF) {
err = xe_bo_restore_user(xe);
if (err)
goto out;
--
2.43.0
next prev parent reply other threads:[~2025-04-01 15:36 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-01 15:32 [PATCH 00/12] VRAM Self Refresh Anshuman Gupta
2025-04-01 15:32 ` [PATCH 01/12] PCI/ACPI: Add D3cold Aux Power Limit_DSM method Anshuman Gupta
2025-04-01 18:25 ` Bjorn Helgaas
2025-04-02 10:59 ` Rafael J. Wysocki
2025-04-03 5:25 ` Gupta, Anshuman
2025-04-01 15:32 ` [PATCH 02/12] PCI/ACPI: Add PERST# Assertion Delay _DSM method Anshuman Gupta
2025-04-01 18:30 ` Bjorn Helgaas
2025-04-03 5:59 ` Gupta, Anshuman
2025-04-02 11:06 ` Rafael J. Wysocki
2025-04-02 14:21 ` Bjorn Helgaas
2025-04-02 14:52 ` Rafael J. Wysocki
2025-04-02 15:50 ` Bjorn Helgaas
2025-04-02 17:51 ` Rafael J. Wysocki
2025-04-02 18:48 ` Bjorn Helgaas
2025-04-02 19:36 ` Rafael J. Wysocki
2025-04-08 20:48 ` Bjorn Helgaas
2025-04-09 12:30 ` Rafael J. Wysocki
2025-04-09 14:47 ` Bjorn Helgaas
2025-04-09 16:28 ` Rafael J. Wysocki
2025-04-01 15:32 ` [PATCH 03/12] PCI/ACPI: Add aux power grant notifier Anshuman Gupta
2025-04-01 20:13 ` Bjorn Helgaas
2025-04-02 11:23 ` Rafael J. Wysocki
2025-04-03 11:30 ` Gupta, Anshuman
2025-04-03 13:34 ` Rafael J. Wysocki
2025-04-03 16:08 ` Gupta, Anshuman
2025-04-03 18:15 ` Rafael J. Wysocki
2025-04-04 12:53 ` Gupta, Anshuman
2025-04-08 13:01 ` Rafael J. Wysocki
2025-04-03 7:56 ` Gupta, Anshuman
2025-04-03 13:48 ` Rafael J. Wysocki
2025-04-01 15:32 ` [PATCH 04/12] drm/xe/vrsr: Introduce flag has_vrsr Anshuman Gupta
2025-04-01 15:32 ` [PATCH 05/12] drm/xe/vrsr: Detect VRSR Capability Anshuman Gupta
2025-04-01 15:32 ` [PATCH 06/12] drm/xe/vrsr: Initialize VRSR feature Anshuman Gupta
2025-04-01 19:56 ` Bjorn Helgaas
2025-04-03 6:09 ` Gupta, Anshuman
2025-04-01 15:32 ` [PATCH 07/12] drm/xe/vrsr: Enable VRSR on default VGA boot device Anshuman Gupta
2025-04-01 15:32 ` [PATCH 08/12] drm/xe: Add PCIe ACPI Aux Power notifier Anshuman Gupta
2025-04-01 15:32 ` [PATCH 09/12] drm/xe/vrsr: Refactor d3cold.allowed to a enum Anshuman Gupta
2025-04-01 15:32 ` [PATCH 10/12] drm/xe/pm: D3Cold target state Anshuman Gupta
2025-04-02 10:28 ` [10/12] " Poosa, Karthik
2025-04-01 15:32 ` Anshuman Gupta [this message]
2025-04-01 15:32 ` [PATCH 12/12] drm/xe/vrsr: Introduce a debugfs node named vrsr_capable Anshuman Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250401153225.96379-12-anshuman.gupta@intel.com \
--to=anshuman.gupta@intel.com \
--cc=badal.nilawar@intel.com \
--cc=bhelgaas@google.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lucas.demarchi@intel.com \
--cc=rafael@kernel.org \
--cc=rodrigo.vivi@intel.com \
--cc=uma.shankar@intel.com \
--cc=varun.gupta@intel.com \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).