Linux ACPI
 help / color / mirror / Atom feed
From: Mario Limonciello <superm1@kernel.org>
To: Hans de Goede <hansg@kernel.org>,
	Mika Westerberg <westeri@kernel.org>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <brgl@bgdev.pl>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-gpio@vger.kernel.org (open list:GPIO ACPI SUPPORT),
	linux-acpi@vger.kernel.org (open list:GPIO ACPI SUPPORT),
	linux-kernel@vger.kernel.org (open list),
	linux-input@vger.kernel.org (open list:INPUT (KEYBOARD, MOUSE,
	JOYSTICK, TOUCHSCREEN)...),
	Mario Limonciello <mario.limonciello@amd.com>
Subject: [PATCH v2 1/3] gpiolib: acpi: Add a helper for programming debounce
Date: Wed, 25 Jun 2025 13:13:40 -0500	[thread overview]
Message-ID: <20250625181342.3175969-2-superm1@kernel.org> (raw)
In-Reply-To: <20250625181342.3175969-1-superm1@kernel.org>

From: Mario Limonciello <mario.limonciello@amd.com>

Debounce is programmed in two places and considered non-fatal in one of
them. Introduce a helper for programming debounce and show a warning
when failing to program.  This is a difference in behavior for the call
in acpi_dev_gpio_irq_wake_get_by().

Cc: Hans de Goede <hansg@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
 drivers/gpio/gpiolib-acpi-core.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/gpio/gpiolib-acpi-core.c b/drivers/gpio/gpiolib-acpi-core.c
index 12b24a717e43f..1895e45bd9f16 100644
--- a/drivers/gpio/gpiolib-acpi-core.c
+++ b/drivers/gpio/gpiolib-acpi-core.c
@@ -291,6 +291,17 @@ acpi_gpio_to_gpiod_flags(const struct acpi_resource_gpio *agpio, int polarity)
 	return GPIOD_ASIS;
 }
 
+static void acpi_set_debounce_timeout(struct gpio_desc *desc, unsigned int timeout)
+{
+	int ret;
+
+	/* ACPI uses hundredths of milliseconds units */
+	ret = gpio_set_debounce_timeout(desc, timeout * 10);
+	if (ret)
+		dev_warn(&desc->gdev->dev,
+			 "Failed to set debounce-timeout: %d\n", ret);
+}
+
 static struct gpio_desc *acpi_request_own_gpiod(struct gpio_chip *chip,
 						struct acpi_resource_gpio *agpio,
 						unsigned int index,
@@ -300,18 +311,12 @@ static struct gpio_desc *acpi_request_own_gpiod(struct gpio_chip *chip,
 	enum gpiod_flags flags = acpi_gpio_to_gpiod_flags(agpio, polarity);
 	unsigned int pin = agpio->pin_table[index];
 	struct gpio_desc *desc;
-	int ret;
 
 	desc = gpiochip_request_own_desc(chip, pin, label, polarity, flags);
 	if (IS_ERR(desc))
 		return desc;
 
-	/* ACPI uses hundredths of milliseconds units */
-	ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout * 10);
-	if (ret)
-		dev_warn(chip->parent,
-			 "Failed to set debounce-timeout for pin 0x%04X, err %d\n",
-			 pin, ret);
+	acpi_set_debounce_timeout(desc, agpio->debounce_timeout);
 
 	return desc;
 }
@@ -1025,10 +1030,7 @@ int acpi_dev_gpio_irq_wake_get_by(struct acpi_device *adev, const char *con_id,
 			if (ret < 0)
 				return ret;
 
-			/* ACPI uses hundredths of milliseconds units */
-			ret = gpio_set_debounce_timeout(desc, info.debounce * 10);
-			if (ret)
-				return ret;
+			acpi_set_debounce_timeout(desc, info.debounce);
 
 			irq_flags = acpi_dev_get_irq_type(info.triggering,
 							  info.polarity);
-- 
2.43.0


  reply	other threads:[~2025-06-25 18:13 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-25 18:13 [PATCH v2 0/3] Fix soc-button-array debounce Mario Limonciello
2025-06-25 18:13 ` Mario Limonciello [this message]
2025-06-25 18:58   ` [PATCH v2 1/3] gpiolib: acpi: Add a helper for programming debounce Hans de Goede
2025-06-25 18:13 ` [PATCH v2 2/3] gpiolib: acpi: Program debounce when finding GPIO Mario Limonciello
2025-06-25 18:58   ` Hans de Goede
2025-06-25 18:13 ` [PATCH v2 3/3] Input: soc_button_array: Only debounce cherryview and baytrail systems Mario Limonciello
2025-06-25 19:03   ` Hans de Goede
2025-06-25 19:23     ` Mario Limonciello
2025-06-25 19:42       ` Hans de Goede
2025-06-25 20:34         ` Mario Limonciello
2025-06-26 18:27           ` Dmitry Torokhov
2025-06-26 18:30             ` Mario Limonciello
2025-06-26 18:53               ` Dmitry Torokhov
2025-06-26 18:58                 ` Mario Limonciello
2025-06-26 19:04                 ` Hans de Goede
2025-06-26 19:32                   ` Dmitry Torokhov
2025-06-26 19:37                     ` Mario Limonciello
2025-06-26 19:54                       ` Dmitry Torokhov
2025-06-26 21:39                         ` Mario Limonciello
2025-06-27  5:08                           ` Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250625181342.3175969-2-superm1@kernel.org \
    --to=superm1@kernel.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=brgl@bgdev.pl \
    --cc=dmitry.torokhov@gmail.com \
    --cc=hansg@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mario.limonciello@amd.com \
    --cc=westeri@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox