From: Yazen Ghannam <yazen.ghannam@amd.com>
To: <x86@kernel.org>, Tony Luck <tony.luck@intel.com>,
"Rafael J. Wysocki" <rafael@kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-edac@vger.kernel.org>,
<Smita.KoralahalliChannabasappa@amd.com>,
Qiuxu Zhuo <qiuxu.zhuo@intel.com>,
Nikolay Borisov <nik.borisov@suse.com>,
<linux-acpi@vger.kernel.org>,
"Yazen Ghannam" <yazen.ghannam@amd.com>
Subject: [PATCH v6 09/15] x86/mce: Unify AMD DFR handler with MCA Polling
Date: Mon, 8 Sep 2025 15:40:38 +0000 [thread overview]
Message-ID: <20250908-wip-mca-updates-v6-9-eef5d6c74b9c@amd.com> (raw)
In-Reply-To: <20250908-wip-mca-updates-v6-0-eef5d6c74b9c@amd.com>
AMD systems optionally support a deferred error interrupt. The interrupt
should be used as another signal to trigger MCA polling. This is similar
to how other MCA interrupts are handled.
Deferred errors do not require any special handling related to the
interrupt, e.g. resetting or rearming the interrupt, etc.
However, Scalable MCA systems include a pair of registers, MCA_DESTAT
and MCA_DEADDR, that should be checked for valid errors. This check
should be done whenever MCA registers are polled. Currently, the
deferred error interrupt does this check, but the MCA polling function
does not.
Call the MCA polling function when handling the deferred error
interrupt. This keeps all "polling" cases in a common function.
Call the polling function only for banks that have the deferred error
interrupt enabled.
Add an SMCA status check helper. This will do the same status check and
register clearing that the interrupt handler has done. And it extends
the common polling flow to find AMD deferred errors.
Remove old code whose functionality is already covered in the common MCA
code.
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
Notes:
Link:
https://lore.kernel.org/r/20250825-wip-mca-updates-v5-14-865768a2eef8@amd.com
v5->v6:
* Move status clearing code to new helper.
v4->v5:
* No change.
v3->v4:
* Add kflag for checking DFR registers.
v2->v3:
* Add tags from Qiuxu and Tony.
v1->v2:
* Keep code comment.
* Log directly from helper function rather than pass values.
Link:
https://lore.kernel.org/r/20250213-wip-mca-updates-v2-13-3636547fe05f@amd.com
v2->v3:
* Add tags from Qiuxu and Tony.
v1->v2:
* Keep code comment.
* Log directly from helper function rather than pass values.
arch/x86/include/asm/mce.h | 6 +++
arch/x86/kernel/cpu/mce/amd.c | 108 ++++-------------------------------------
arch/x86/kernel/cpu/mce/core.c | 45 ++++++++++++++++-
3 files changed, 59 insertions(+), 100 deletions(-)
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 31e3cb550fb3..7d6588195d56 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -165,6 +165,12 @@
*/
#define MCE_IN_KERNEL_COPYIN BIT_ULL(7)
+/*
+ * Indicates that handler should check and clear Deferred error registers
+ * rather than common ones.
+ */
+#define MCE_CHECK_DFR_REGS BIT_ULL(8)
+
/*
* This structure contains all data related to the MCE log. Also
* carries a signature to make it easier to find from external
diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c
index ac6a98aa7bc2..1b1b83b3aef9 100644
--- a/arch/x86/kernel/cpu/mce/amd.c
+++ b/arch/x86/kernel/cpu/mce/amd.c
@@ -56,6 +56,7 @@ static bool thresholding_irq_en;
struct mce_amd_cpu_data {
mce_banks_t thr_intr_banks;
+ mce_banks_t dfr_intr_banks;
};
static DEFINE_PER_CPU_READ_MOSTLY(struct mce_amd_cpu_data, mce_amd_data);
@@ -300,8 +301,10 @@ static void smca_configure(unsigned int bank, unsigned int cpu)
* APIC based interrupt. First, check that no interrupt has been
* set.
*/
- if ((low & BIT(5)) && !((high >> 5) & 0x3))
+ if ((low & BIT(5)) && !((high >> 5) & 0x3)) {
+ __set_bit(bank, this_cpu_ptr(&mce_amd_data)->dfr_intr_banks);
high |= BIT(5);
+ }
this_cpu_ptr(mce_banks_array)[bank].lsb_in_status = !!(low & BIT(8));
@@ -792,37 +795,6 @@ bool amd_mce_usable_address(struct mce *m)
return false;
}
-static void __log_error(unsigned int bank, u64 status, u64 addr, u64 misc)
-{
- struct mce_hw_err err;
- struct mce *m = &err.m;
-
- mce_prep_record(&err);
-
- m->status = status;
- m->misc = misc;
- m->bank = bank;
- m->tsc = rdtsc();
-
- if (m->status & MCI_STATUS_ADDRV) {
- m->addr = addr;
-
- smca_extract_err_addr(m);
- }
-
- if (mce_flags.smca) {
- rdmsrq(MSR_AMD64_SMCA_MCx_IPID(bank), m->ipid);
-
- if (m->status & MCI_STATUS_SYNDV) {
- rdmsrq(MSR_AMD64_SMCA_MCx_SYND(bank), m->synd);
- rdmsrq(MSR_AMD64_SMCA_MCx_SYND1(bank), err.vendor.amd.synd1);
- rdmsrq(MSR_AMD64_SMCA_MCx_SYND2(bank), err.vendor.amd.synd2);
- }
- }
-
- mce_log(&err);
-}
-
DEFINE_IDTENTRY_SYSVEC(sysvec_deferred_error)
{
trace_deferred_error_apic_entry(DEFERRED_ERROR_VECTOR);
@@ -832,75 +804,10 @@ DEFINE_IDTENTRY_SYSVEC(sysvec_deferred_error)
apic_eoi();
}
-/*
- * Returns true if the logged error is deferred. False, otherwise.
- */
-static inline bool
-_log_error_bank(unsigned int bank, u32 msr_stat, u32 msr_addr, u64 misc)
-{
- u64 status, addr = 0;
-
- rdmsrq(msr_stat, status);
- if (!(status & MCI_STATUS_VAL))
- return false;
-
- if (status & MCI_STATUS_ADDRV)
- rdmsrq(msr_addr, addr);
-
- __log_error(bank, status, addr, misc);
-
- wrmsrq(msr_stat, 0);
-
- return status & MCI_STATUS_DEFERRED;
-}
-
-static bool _log_error_deferred(unsigned int bank, u32 misc)
-{
- if (!_log_error_bank(bank, mca_msr_reg(bank, MCA_STATUS),
- mca_msr_reg(bank, MCA_ADDR), misc))
- return false;
-
- /*
- * Non-SMCA systems don't have MCA_DESTAT/MCA_DEADDR registers.
- * Return true here to avoid accessing these registers.
- */
- if (!mce_flags.smca)
- return true;
-
- /* Clear MCA_DESTAT if the deferred error was logged from MCA_STATUS. */
- wrmsrq(MSR_AMD64_SMCA_MCx_DESTAT(bank), 0);
- return true;
-}
-
-/*
- * We have three scenarios for checking for Deferred errors:
- *
- * 1) Non-SMCA systems check MCA_STATUS and log error if found.
- * 2) SMCA systems check MCA_STATUS. If error is found then log it and also
- * clear MCA_DESTAT.
- * 3) SMCA systems check MCA_DESTAT, if error was not found in MCA_STATUS, and
- * log it.
- */
-static void log_error_deferred(unsigned int bank)
-{
- if (_log_error_deferred(bank, 0))
- return;
-
- /*
- * Only deferred errors are logged in MCA_DE{STAT,ADDR} so just check
- * for a valid error.
- */
- _log_error_bank(bank, MSR_AMD64_SMCA_MCx_DESTAT(bank),
- MSR_AMD64_SMCA_MCx_DEADDR(bank), 0);
-}
-
/* APIC interrupt handler for deferred errors */
static void amd_deferred_error_interrupt(void)
{
- unsigned int bank;
-
- for (bank = 0; bank < this_cpu_read(mce_num_banks); ++bank)
- log_error_deferred(bank);
+ machine_check_poll(MCP_TIMESTAMP, &this_cpu_ptr(&mce_amd_data)->dfr_intr_banks);
}
static void reset_block(struct threshold_block *block)
@@ -952,7 +859,10 @@ void amd_clear_bank(struct mce *m)
{
amd_reset_thr_limit(m->bank);
- mce_wrmsrq(mca_msr_reg(m->bank, MCA_STATUS), 0);
+ if (m->kflags & MCE_CHECK_DFR_REGS)
+ mce_wrmsrq(MSR_AMD64_SMCA_MCx_DESTAT(m->bank), 0);
+ else
+ mce_wrmsrq(mca_msr_reg(m->bank, MCA_STATUS), 0);
}
/*
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 06645f56b564..e2d51609d2cb 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -687,7 +687,10 @@ static noinstr void mce_read_aux(struct mce_hw_err *err, int i)
m->misc = mce_rdmsrq(mca_msr_reg(i, MCA_MISC));
if (m->status & MCI_STATUS_ADDRV) {
- m->addr = mce_rdmsrq(mca_msr_reg(i, MCA_ADDR));
+ if (m->kflags & MCE_CHECK_DFR_REGS)
+ m->addr = mce_rdmsrq(MSR_AMD64_SMCA_MCx_DEADDR(i));
+ else
+ m->addr = mce_rdmsrq(mca_msr_reg(i, MCA_ADDR));
/*
* Mask the reported address by the reported granularity.
@@ -714,6 +717,43 @@ static noinstr void mce_read_aux(struct mce_hw_err *err, int i)
DEFINE_PER_CPU(unsigned, mce_poll_count);
+/*
+ * We have three scenarios for checking for Deferred errors:
+ *
+ * 1) Non-SMCA systems check MCA_STATUS and log error if found.
+ * 2) SMCA systems check MCA_STATUS. If error is found then log it and also
+ * clear MCA_DESTAT.
+ * 3) SMCA systems check MCA_DESTAT, if error was not found in MCA_STATUS, and
+ * log it.
+ */
+static bool smca_should_log_poll_error(enum mcp_flags flags, struct mce_hw_err *err)
+{
+ struct mce *m = &err->m;
+
+ /*
+ * If this is a deferred error found in MCA_STATUS, then clear
+ * the redundant data from the MCA_DESTAT register.
+ */
+ if (m->status & MCI_STATUS_VAL) {
+ if (m->status & MCI_STATUS_DEFERRED)
+ mce_wrmsrq(MSR_AMD64_SMCA_MCx_DESTAT(m->bank), 0);
+
+ return true;
+ }
+
+ /*
+ * If the MCA_DESTAT register has valid data, then use
+ * it as the status register.
+ */
+ m->status = mce_rdmsrq(MSR_AMD64_SMCA_MCx_DESTAT(m->bank));
+
+ if (!(m->status & MCI_STATUS_VAL))
+ return false;
+
+ m->kflags |= MCE_CHECK_DFR_REGS;
+ return true;
+}
+
/*
* Newer Intel systems that support software error
* recovery need to make additional checks. Other
@@ -740,6 +780,9 @@ static bool should_log_poll_error(enum mcp_flags flags, struct mce_hw_err *err)
{
struct mce *m = &err->m;
+ if (mce_flags.smca)
+ return smca_should_log_poll_error(flags, err);
+
/* If this entry is not valid, ignore it. */
if (!(m->status & MCI_STATUS_VAL))
return false;
--
2.51.0
next prev parent reply other threads:[~2025-09-08 15:41 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-08 15:40 [PATCH v6 00/15] AMD MCA interrupts rework Yazen Ghannam
2025-09-08 15:40 ` [PATCH v6 01/15] x86/mce: Set CR4.MCE last during init Yazen Ghannam
2025-09-10 11:43 ` Nikolay Borisov
2025-09-08 15:40 ` [PATCH v6 02/15] x86/mce: Define BSP-only init Yazen Ghannam
2025-09-10 11:47 ` Nikolay Borisov
2025-09-10 13:53 ` Yazen Ghannam
2025-09-10 14:28 ` Nikolay Borisov
2025-09-10 17:23 ` Luck, Tony
2025-09-08 15:40 ` [PATCH v6 03/15] x86/mce: Define BSP-only SMCA init Yazen Ghannam
2025-09-10 11:48 ` Nikolay Borisov
2025-09-08 15:40 ` [PATCH v6 04/15] x86/mce: Do 'UNKNOWN' vendor check early Yazen Ghannam
2025-09-10 13:27 ` Nikolay Borisov
2025-09-08 15:40 ` [PATCH v6 05/15] x86/mce: Separate global and per-CPU quirks Yazen Ghannam
2025-09-10 13:29 ` Nikolay Borisov
2025-09-08 15:40 ` [PATCH v6 06/15] x86/mce: Move machine_check_poll() status checks to helper functions Yazen Ghannam
2025-09-10 15:09 ` Nikolay Borisov
2025-09-08 15:40 ` [PATCH v6 07/15] x86/mce: Add clear_bank() helper Yazen Ghannam
2025-09-10 15:22 ` Nikolay Borisov
2025-09-08 15:40 ` [PATCH v6 08/15] x86/mce: Unify AMD THR handler with MCA Polling Yazen Ghannam
2025-09-08 15:40 ` Yazen Ghannam [this message]
2025-09-08 15:40 ` [PATCH v6 10/15] x86/mce/amd: Enable interrupt vectors once per-CPU on SMCA systems Yazen Ghannam
2025-09-11 10:22 ` Nikolay Borisov
2025-09-11 15:53 ` Yazen Ghannam
2025-09-08 15:40 ` [PATCH v6 11/15] x86/mce/amd: Support SMCA Corrected Error Interrupt Yazen Ghannam
2025-09-08 15:40 ` [PATCH v6 12/15] x86/mce/amd: Remove redundant reset_block() Yazen Ghannam
2025-09-11 14:42 ` Nikolay Borisov
2025-09-11 16:11 ` Yazen Ghannam
2025-09-08 15:40 ` [PATCH v6 13/15] x86/mce/amd: Define threshold restart function for banks Yazen Ghannam
2025-09-11 14:49 ` Nikolay Borisov
2025-09-08 15:40 ` [PATCH v6 14/15] x86/mce: Handle AMD threshold interrupt storms Yazen Ghannam
2025-09-08 15:40 ` [PATCH v6 15/15] x86/mce: Save and use APEI corrected threshold limit Yazen Ghannam
2025-09-11 17:01 ` Nikolay Borisov
2025-09-15 17:33 ` Yazen Ghannam
2025-09-19 10:42 ` Nikolay Borisov
2025-09-22 13:58 ` Yazen Ghannam
2025-09-08 16:10 ` [PATCH v6 00/15] AMD MCA interrupts rework Luck, Tony
2025-09-09 13:36 ` Yazen Ghannam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250908-wip-mca-updates-v6-9-eef5d6c74b9c@amd.com \
--to=yazen.ghannam@amd.com \
--cc=Smita.KoralahalliChannabasappa@amd.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nik.borisov@suse.com \
--cc=qiuxu.zhuo@intel.com \
--cc=rafael@kernel.org \
--cc=tony.luck@intel.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).