From: silverducks@altlinux.org
To: linux-gpio@vger.kernel.org
Cc: Mika Westerberg <westeri@kernel.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Linus Walleij <linusw@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>,
linux-acpi@vger.kernel.org, stable@vger.kernel.org,
silverducks <silverducks@altlinux.org>
Subject: [PATCH] gpiolib: acpi: Add ignore_wake quirk for Gigabyte B650 GAMING X AX
Date: Thu, 19 Nov 2026 11:38:13 +0300 [thread overview]
Message-ID: <20261119083813.390337-1-silverducks@altlinux.org> (raw)
From: silverducks <silverducks@altlinux.org>
The firmware's _AEI table on the Gigabyte B650 GAMING X AX declares AMD
GPIO pin 3 as GpioInt(Edge, ActiveLow, ExclusiveAndWake). gpiolib-acpi
requests it as "ACPI:Event" and amd_gpio_irq_set_wake() arms the hardware
S3 wake bit for that pin. The firmware then sends the signal a few seconds
after entering S3, so the machine resumes on it's own six to ten seconds
after suspend.
Pin 3 is the only wake signal the OS can see for the whole GPP7 PCIe
domain, and GPP7 has no _PRW, so ignoring this wake flag is the only way to
keep S3 reliable on this board. Wake from USB keyboards/mouse and
Wake-on-LAN through that domain is lost as a consequence, but I figure S3
not working at all is worse. The power button still wakes the machine as
normal
Quirk tested on upstream kernel v7.4-rc2. Also tested on stable kernel
6.12, which is the version where the issue was originally diagnosed.
Signed-off-by: silverducks <silverducks@altlinux.org>
---
drivers/gpio/gpiolib-acpi-quirks.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/gpio/gpiolib-acpi-quirks.c b/drivers/gpio/gpiolib-acpi-quirks.c
index 3f89a87601c1..5455784e67c2 100644
--- a/drivers/gpio/gpiolib-acpi-quirks.c
+++ b/drivers/gpio/gpiolib-acpi-quirks.c
@@ -465,6 +465,23 @@ static const struct dmi_system_id gpiolib_acpi_quirks[] __initconst = {
.ignore_wake = "GTCH7503:00@10",
},
},
+ {
+ /*
+ * Spurious wake from S3: the firmware _AEI table declares AMD GPIO
+ * pin 3 (GPP7 group) as Edge/ActiveLow ExclusiveAndWake, so gpiolib-acpi
+ * requests it as ACPI:Event and amd_gpio_irq_set_wake() arms the
+ * hardware S0i3/S3 wake bit. The firmware asserts this signal during
+ * S3 entry regardless of the PCI wake sources configured by the OS,
+ * waking the machine a few seconds after suspend.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "B650 GAMING X AX"),
+ },
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .ignore_wake = "AMDI0030:00@3",
+ },
+ },
{} /* Terminating entry */
};
--
2.50.1
next reply other threads:[~2026-11-19 8:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 8:38 silverducks [this message]
2026-11-19 11:45 ` [PATCH] gpiolib: acpi: Add ignore_wake quirk for Gigabyte B650 GAMING X AX Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261119083813.390337-1-silverducks@altlinux.org \
--to=silverducks@altlinux.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=brgl@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=westeri@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox